/* Everything about breakpoints, for GDB.
Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994,
- 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software
- Foundation, Inc.
+ 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+ Free Software Foundation, Inc.
This file is part of GDB.
#include "ui-out.h"
#include "cli/cli-script.h"
#include "gdb_assert.h"
+#include "block.h"
#include "gdb-events.h"
static void catch_command (char *, int);
-static void handle_gnu_4_16_catch_command (char *, int, int);
-
-static struct symtabs_and_lines get_catch_sals (int);
-
static void watch_command (char *, int);
static int can_use_hardware_watchpoint (struct value *);
extern void tbreak_at_finish_command (char *, int);
-static void break_command_1 (char *, int, int);
+static int break_command_1 (char *, int, int, struct breakpoint *);
static void mention (struct breakpoint *);
static void check_duplicates (struct breakpoint *);
+static void breakpoint_adjustment_warning (CORE_ADDR, CORE_ADDR, int, int);
+
+static CORE_ADDR adjust_breakpoint_address (CORE_ADDR bpaddr,
+ enum bptype bptype);
+
static void describe_other_breakpoints (CORE_ADDR, asection *);
static void breakpoints_info (char *, int);
static int get_number_trailer (char **, int);
+static int do_captured_parse_breakpoint (struct ui_out *, void *);
+
void set_breakpoint_count (int);
typedef enum
}
insertion_state_t;
-static int remove_breakpoint (struct breakpoint *, insertion_state_t);
+static int remove_breakpoint (struct bp_location *, insertion_state_t);
static enum print_stop_action print_it_typical (bpstat);
static char *ep_parse_optional_filename (char **arg);
-#if defined(CHILD_INSERT_EXEC_CATCHPOINT)
-static void catch_exec_command_1 (char *arg, int tempflag, int from_tty);
-#endif
-
static void create_exception_catchpoint (int tempflag, char *cond_string,
enum exception_event_kind ex_event,
struct symtab_and_line *sal);
if such is available. */
static int can_use_hw_watchpoints;
+/* If AUTO_BOOLEAN_FALSE, gdb will not attempt to create pending breakpoints.
+ If AUTO_BOOLEAN_TRUE, gdb will automatically create pending breakpoints
+ for unrecognized breakpoint locations.
+ If AUTO_BOOLEAN_AUTO, gdb will query when breakpoints are unrecognized. */
+static enum auto_boolean pending_break_support;
+
void _initialize_breakpoint (void);
extern int addressprint; /* Print machine addresses? */
B ? (TMP=B->next, 1): 0; \
B = TMP)
-/* True if SHIFT_INST_REGS defined, false otherwise. */
+/* Similar iterators for the low-level breakpoints. */
-int must_shift_inst_regs =
-#if defined(SHIFT_INST_REGS)
-1
-#else
-0
-#endif
- ;
+#define ALL_BP_LOCATIONS(B) for (B = bp_location_chain; B; B = B->next)
+
+#define ALL_BP_LOCATIONS_SAFE(B,TMP) \
+ for (B = bp_location_chain; \
+ B ? (TMP=B->next, 1): 0; \
+ B = TMP)
/* True if breakpoint hit counts should be displayed in breakpoint info. */
int show_breakpoint_hit_counts = 1;
-/* Chain of all breakpoints defined. */
+/* Chains of all breakpoints defined. */
struct breakpoint *breakpoint_chain;
+struct bp_location *bp_location_chain;
+
/* Number of last breakpoint made. */
int breakpoint_count;
/* Pointer to current exception event record */
static struct exception_event_record *current_exception_event;
-/* Indicator of whether exception catchpoints should be nuked
- between runs of a program */
-int exception_catchpoints_are_fragile = 0;
+/* Indicator of whether exception catchpoints should be nuked between
+ runs of a program. */
+int deprecated_exception_catchpoints_are_fragile = 0;
/* Indicator of when exception catchpoints set-up should be
- reinitialized -- e.g. when program is re-run */
-int exception_support_initialized = 0;
+ reinitialized -- e.g. when program is re-run. */
+int deprecated_exception_support_initialized = 0;
/* This function returns a pointer to the string representation of the
pathname of the dynamically-linked library that has just been
error ("catch of library unloads not yet implemented on this platform")
#endif
+/* Return whether a breakpoint is an active enabled breakpoint. */
+static int
+breakpoint_enabled (struct breakpoint *b)
+{
+ return (b->enable_state == bp_enabled && !b->pending);
+}
+
/* Set breakpoint count to NUM. */
void
static void
condition_command (char *arg, int from_tty)
{
- register struct breakpoint *b;
+ struct breakpoint *b;
char *p;
- register int bnum;
+ int bnum;
if (arg == 0)
error_no_arg ("breakpoint number");
/* I don't know if it matters whether this is the string the user
typed in or the decompiled expression. */
b->cond_string = savestring (arg, strlen (arg));
- b->cond = parse_exp_1 (&arg, block_for_pc (b->address), 0);
- if (*arg)
- error ("Junk at end of expression");
+ if (!b->pending)
+ {
+ b->cond = parse_exp_1 (&arg, block_for_pc (b->loc->address), 0);
+ if (*arg)
+ error ("Junk at end of expression");
+ }
}
breakpoints_changed ();
breakpoint_modify_event (b->number);
error ("No breakpoint number %d.", bnum);
}
-/* ARGSUSED */
static void
commands_command (char *arg, int from_tty)
{
- register struct breakpoint *b;
+ struct breakpoint *b;
char *p;
- register int bnum;
+ int bnum;
struct command_line *l;
/* If we allowed this, we would have problems with when to
ALL_BREAKPOINTS (b)
if (b->number == bnum)
- {
- char tmpbuf[128];
- sprintf (tmpbuf,
- "Type commands for when breakpoint %d is hit, one per line.",
- bnum);
- l = read_command_lines (tmpbuf, from_tty);
- free_command_lines (&b->commands);
- b->commands = l;
- breakpoints_changed ();
- breakpoint_modify_event (b->number);
- return;
+ {
+ char *tmpbuf = xstrprintf ("Type commands for when breakpoint %d is hit, one per line.",
+ bnum);
+ struct cleanup *cleanups = make_cleanup (xfree, tmpbuf);
+ l = read_command_lines (tmpbuf, from_tty);
+ do_cleanups (cleanups);
+ free_command_lines (&b->commands);
+ b->commands = l;
+ breakpoints_changed ();
+ breakpoint_modify_event (b->number);
+ return;
}
error ("No breakpoint number %d.", bnum);
}
read_memory_nobpt (CORE_ADDR memaddr, char *myaddr, unsigned len)
{
int status;
- struct breakpoint *b;
+ struct bp_location *b;
CORE_ADDR bp_addr = 0;
int bp_size = 0;
/* No breakpoints on this machine. */
return target_read_memory (memaddr, myaddr, len);
- ALL_BREAKPOINTS (b)
+ ALL_BP_LOCATIONS (b)
{
- if (b->type == bp_none)
- warning ("reading through apparently deleted breakpoint #%d?",
- b->number);
+ if (b->owner->type == bp_none)
+ warning ("reading through apparently deleted breakpoint #%d?",
+ b->owner->number);
- /* memory breakpoint? */
- if (b->type == bp_watchpoint
- || b->type == bp_hardware_watchpoint
- || b->type == bp_read_watchpoint
- || b->type == bp_access_watchpoint)
+ if (b->loc_type != bp_loc_software_breakpoint)
continue;
- /* bp in memory? */
if (!b->inserted)
continue;
/* Addresses and length of the part of the breakpoint that
}
\f
-/* insert_breakpoints is used when starting or continuing the program.
- remove_breakpoints is used when the program stops.
- Both return zero if successful,
- or an `errno' value if could not write the inferior. */
+/* A wrapper function for inserting catchpoints. */
+static int
+insert_catchpoint (struct ui_out *uo, void *args)
+{
+ struct breakpoint *b = (struct breakpoint *) args;
+ int val = -1;
-int
-insert_breakpoints (void)
+ switch (b->type)
+ {
+ case bp_catch_fork:
+ val = target_insert_fork_catchpoint (PIDGET (inferior_ptid));
+ break;
+ case bp_catch_vfork:
+ val = target_insert_vfork_catchpoint (PIDGET (inferior_ptid));
+ break;
+ case bp_catch_exec:
+ val = target_insert_exec_catchpoint (PIDGET (inferior_ptid));
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, "unknown breakpoint type");
+ break;
+ }
+
+ if (val < 0)
+ throw_exception (RETURN_ERROR);
+
+ return 0;
+}
+
+/* Helper routine: free the value chain for a breakpoint (watchpoint). */
+
+static void free_valchain (struct bp_location *b)
{
- register struct breakpoint *b, *temp;
- int return_val = 0; /* return success code. */
- int val = 0;
- int disabled_breaks = 0;
- int hw_breakpoint_error = 0;
-#ifdef ONE_PROCESS_WRITETEXT
- int process_warning = 0;
-#endif
+ struct value *v;
+ struct value *n;
- static char message1[] = "Error inserting catchpoint %d:\n";
- static char message[sizeof (message1) + 30];
+ /* Free the saved value chain. We will construct a new one
+ the next time the watchpoint is inserted. */
+ for (v = b->owner->val_chain; v; v = n)
+ {
+ n = v->next;
+ value_free (v);
+ }
+ b->owner->val_chain = NULL;
+}
- struct ui_file *tmp_error_stream = mem_fileopen ();
- make_cleanup_ui_file_delete (tmp_error_stream);
+/* Insert a low-level "breakpoint" of some type. BPT is the breakpoint.
+ Any error messages are printed to TMP_ERROR_STREAM; and DISABLED_BREAKS,
+ PROCESS_WARNING, and HW_BREAKPOINT_ERROR are used to report problems.
- /* Explicitly mark the warning -- this will only be printed if
- there was an error. */
- fprintf_unfiltered (tmp_error_stream, "Warning:\n");
+ NOTE drow/2003-09-09: This routine could be broken down to an object-style
+ method for each breakpoint or catchpoint type. */
+static int
+insert_bp_location (struct bp_location *bpt,
+ struct ui_file *tmp_error_stream,
+ int *disabled_breaks, int *process_warning,
+ int *hw_breakpoint_error)
+{
+ int val = 0;
- ALL_BREAKPOINTS_SAFE (b, temp)
- {
- /* Permanent breakpoints cannot be inserted or removed. Disabled
- breakpoints should not be inserted. */
- if (b->enable_state != bp_enabled)
- continue;
+ /* Permanent breakpoints cannot be inserted or removed. Disabled
+ breakpoints should not be inserted. */
+ if (!breakpoint_enabled (bpt->owner))
+ return 0;
- if ((b->type == bp_watchpoint
- || b->type == bp_hardware_watchpoint
- || b->type == bp_read_watchpoint
- || b->type == bp_access_watchpoint) && (!b->val))
- {
- struct value *val;
- val = evaluate_expression (b->exp);
- release_value (val);
- if (VALUE_LAZY (val))
- value_fetch_lazy (val);
- b->val = val;
- }
- if (b->type != bp_watchpoint
- && b->type != bp_hardware_watchpoint
- && b->type != bp_read_watchpoint
- && b->type != bp_access_watchpoint
- && b->type != bp_catch_fork
- && b->type != bp_catch_vfork
- && b->type != bp_catch_exec
- && b->type != bp_catch_throw
- && b->type != bp_catch_catch
- && !b->inserted
- && !b->duplicate)
- {
- /* "Normal" instruction breakpoint: either the standard
- trap-instruction bp (bp_breakpoint), or a
- bp_hardware_breakpoint. */
-
- /* First check to see if we have to handle an overlay. */
- if (overlay_debugging == ovly_off
- || b->section == NULL
- || !(section_is_overlay (b->section)))
- {
- /* No overlay handling: just set the breakpoint. */
+ if (bpt->inserted || bpt->duplicate)
+ return 0;
- if (b->type == bp_hardware_breakpoint)
- val = target_insert_hw_breakpoint (b->address,
- b->shadow_contents);
- else
- val = target_insert_breakpoint (b->address, b->shadow_contents);
- }
- else
- {
- /* This breakpoint is in an overlay section.
- Shall we set a breakpoint at the LMA? */
- if (!overlay_events_enabled)
- {
- /* Yes -- overlay event support is not active,
- so we must try to set a breakpoint at the LMA.
- This will not work for a hardware breakpoint. */
- if (b->type == bp_hardware_breakpoint)
- warning ("hardware breakpoint %d not supported in overlay!\n",
- b->number);
- else
- {
- CORE_ADDR addr = overlay_unmapped_address (b->address,
- b->section);
- /* Set a software (trap) breakpoint at the LMA. */
- val = target_insert_breakpoint (addr, b->shadow_contents);
- if (val != 0)
- fprintf_unfiltered (tmp_error_stream,
- "Overlay breakpoint %d failed: in ROM?",
- b->number);
- }
- }
- /* Shall we set a breakpoint at the VMA? */
- if (section_is_mapped (b->section))
- {
- /* Yes. This overlay section is mapped into memory. */
- if (b->type == bp_hardware_breakpoint)
- val = target_insert_hw_breakpoint (b->address,
- b->shadow_contents);
- else
- val = target_insert_breakpoint (b->address,
- b->shadow_contents);
- }
- else
- {
- /* No. This breakpoint will not be inserted.
- No error, but do not mark the bp as 'inserted'. */
- continue;
- }
- }
+ if (bpt->loc_type == bp_loc_software_breakpoint
+ || bpt->loc_type == bp_loc_hardware_breakpoint)
+ {
+ /* First check to see if we have to handle an overlay. */
+ if (overlay_debugging == ovly_off
+ || bpt->section == NULL
+ || !(section_is_overlay (bpt->section)))
+ {
+ /* No overlay handling: just set the breakpoint. */
- if (val)
- {
- /* Can't set the breakpoint. */
-#if defined (DISABLE_UNSETTABLE_BREAK)
- if (DISABLE_UNSETTABLE_BREAK (b->address))
- {
- /* See also: disable_breakpoints_in_shlibs. */
- val = 0;
- b->enable_state = bp_shlib_disabled;
- if (!disabled_breaks)
- {
- fprintf_unfiltered (tmp_error_stream,
- "Cannot insert breakpoint %d.\n",
- b->number);
+ if (bpt->loc_type == bp_loc_hardware_breakpoint)
+ val = target_insert_hw_breakpoint (bpt->address,
+ bpt->shadow_contents);
+ else
+ val = target_insert_breakpoint (bpt->address,
+ bpt->shadow_contents);
+ }
+ else
+ {
+ /* This breakpoint is in an overlay section.
+ Shall we set a breakpoint at the LMA? */
+ if (!overlay_events_enabled)
+ {
+ /* Yes -- overlay event support is not active,
+ so we must try to set a breakpoint at the LMA.
+ This will not work for a hardware breakpoint. */
+ if (bpt->loc_type == bp_loc_hardware_breakpoint)
+ warning ("hardware breakpoint %d not supported in overlay!\n",
+ bpt->owner->number);
+ else
+ {
+ CORE_ADDR addr = overlay_unmapped_address (bpt->address,
+ bpt->section);
+ /* Set a software (trap) breakpoint at the LMA. */
+ val = target_insert_breakpoint (addr, bpt->shadow_contents);
+ if (val != 0)
fprintf_unfiltered (tmp_error_stream,
- "Temporarily disabling shared library breakpoints:\n");
- }
- disabled_breaks = 1;
- fprintf_unfiltered (tmp_error_stream,
- "breakpoint #%d\n", b->number);
- }
- else
+ "Overlay breakpoint %d failed: in ROM?",
+ bpt->owner->number);
+ }
+ }
+ /* Shall we set a breakpoint at the VMA? */
+ if (section_is_mapped (bpt->section))
+ {
+ /* Yes. This overlay section is mapped into memory. */
+ if (bpt->loc_type == bp_loc_hardware_breakpoint)
+ val = target_insert_hw_breakpoint (bpt->address,
+ bpt->shadow_contents);
+ else
+ val = target_insert_breakpoint (bpt->address,
+ bpt->shadow_contents);
+ }
+ else
+ {
+ /* No. This breakpoint will not be inserted.
+ No error, but do not mark the bp as 'inserted'. */
+ return 0;
+ }
+ }
+
+ if (val)
+ {
+ /* Can't set the breakpoint. */
+#if defined (DISABLE_UNSETTABLE_BREAK)
+ if (DISABLE_UNSETTABLE_BREAK (bpt->address))
+ {
+ /* See also: disable_breakpoints_in_shlibs. */
+ val = 0;
+ bpt->owner->enable_state = bp_shlib_disabled;
+ if (!*disabled_breaks)
+ {
+ fprintf_unfiltered (tmp_error_stream,
+ "Cannot insert breakpoint %d.\n",
+ bpt->owner->number);
+ fprintf_unfiltered (tmp_error_stream,
+ "Temporarily disabling shared library breakpoints:\n");
+ }
+ *disabled_breaks = 1;
+ fprintf_unfiltered (tmp_error_stream,
+ "breakpoint #%d\n", bpt->owner->number);
+ }
+ else
#endif
- {
+ {
#ifdef ONE_PROCESS_WRITETEXT
- process_warning = 1;
+ *process_warning = 1;
#endif
- if (b->type == bp_hardware_breakpoint)
- {
- hw_breakpoint_error = 1;
- fprintf_unfiltered (tmp_error_stream,
- "Cannot insert hardware breakpoint %d.\n",
- b->number);
- }
- else
- {
- fprintf_unfiltered (tmp_error_stream,
- "Cannot insert breakpoint %d.\n",
- b->number);
- fprintf_filtered (tmp_error_stream,
- "Error accessing memory address ");
- print_address_numeric (b->address, 1, tmp_error_stream);
- fprintf_filtered (tmp_error_stream, ": %s.\n",
- safe_strerror (val));
- }
+ if (bpt->loc_type == bp_loc_hardware_breakpoint)
+ {
+ *hw_breakpoint_error = 1;
+ fprintf_unfiltered (tmp_error_stream,
+ "Cannot insert hardware breakpoint %d.\n",
+ bpt->owner->number);
+ }
+ else
+ {
+ fprintf_unfiltered (tmp_error_stream,
+ "Cannot insert breakpoint %d.\n",
+ bpt->owner->number);
+ fprintf_filtered (tmp_error_stream,
+ "Error accessing memory address ");
+ print_address_numeric (bpt->address, 1, tmp_error_stream);
+ fprintf_filtered (tmp_error_stream, ": %s.\n",
+ safe_strerror (val));
+ }
- }
- }
- else
- b->inserted = 1;
+ }
+ }
+ else
+ bpt->inserted = 1;
- if (val)
- return_val = val; /* remember failure */
- }
- else if (ep_is_exception_catchpoint (b)
- && !b->inserted
- && !b->duplicate)
+ return val;
+ }
- {
- /* If we get here, we must have a callback mechanism for exception
- events -- with g++ style embedded label support, we insert
- ordinary breakpoints and not catchpoints. */
- /* Format possible error message */
- sprintf (message, message1, b->number);
-
- val = target_insert_breakpoint (b->address, b->shadow_contents);
- if (val)
- {
- /* Couldn't set breakpoint for some reason */
- fprintf_unfiltered (tmp_error_stream,
- "Cannot insert catchpoint %d; disabling it.\n",
- b->number);
- fprintf_filtered (tmp_error_stream,
- "Error accessing memory address ");
- print_address_numeric (b->address, 1, tmp_error_stream);
- fprintf_filtered (tmp_error_stream, ": %s.\n",
- safe_strerror (val));
- b->enable_state = bp_disabled;
- }
- else
- {
- /* Bp set, now make sure callbacks are enabled */
- int val;
- args_for_catchpoint_enable args;
- args.kind = b->type == bp_catch_catch ?
- EX_EVENT_CATCH : EX_EVENT_THROW;
- args.enable_p = 1;
- val = catch_errors (cover_target_enable_exception_callback,
- &args,
- message, RETURN_MASK_ALL);
- if (val != 0 && val != -1)
- {
- b->inserted = 1;
- }
- /* Check if something went wrong; val == 0 can be ignored */
- if (val == -1)
- {
- /* something went wrong */
- fprintf_unfiltered (tmp_error_stream,
- "Cannot insert catchpoint %d; disabling it.\n",
- b->number);
- b->enable_state = bp_disabled;
- }
- }
+ else if (bpt->loc_type == bp_loc_hardware_watchpoint
+ /* NOTE drow/2003-09-08: This state only exists for removing
+ watchpoints. It's not clear that it's necessary... */
+ && bpt->owner->disposition != disp_del_at_next_stop)
+ {
+ /* FIXME drow/2003-09-08: This code sets multiple hardware watchpoints
+ based on the expression. Ideally this should happen at a higher level,
+ and there should be one bp_location for each computed address we
+ must watch. As soon as a many-to-one mapping is available I'll
+ convert this. */
- if (val)
- return_val = val; /* remember failure */
- }
+ int within_current_scope;
+ struct value *mark = value_mark ();
+ struct value *v;
+ struct frame_id saved_frame_id;
+
+ /* Save the current frame's ID so we can restore it after
+ evaluating the watchpoint expression on its own frame. */
+ /* FIXME drow/2003-09-09: It would be nice if evaluate_expression
+ took a frame parameter, so that we didn't have to change the
+ selected frame. */
+ saved_frame_id = get_frame_id (deprecated_selected_frame);
+
+ /* Determine if the watchpoint is within scope. */
+ if (bpt->owner->exp_valid_block == NULL)
+ within_current_scope = 1;
+ else
+ {
+ struct frame_info *fi;
+ fi = frame_find_by_id (bpt->owner->watchpoint_frame);
+ within_current_scope = (fi != NULL);
+ if (within_current_scope)
+ select_frame (fi);
+ }
- else if ((b->type == bp_hardware_watchpoint ||
- b->type == bp_read_watchpoint ||
- b->type == bp_access_watchpoint)
- && b->disposition != disp_del_at_next_stop
- && !b->inserted
- && !b->duplicate)
- {
- struct frame_info *saved_frame;
- int saved_level, within_current_scope;
- struct value *mark = value_mark ();
- struct value *v;
+ if (within_current_scope)
+ {
+ free_valchain (bpt);
- /* Save the current frame and level so we can restore it after
- evaluating the watchpoint expression on its own frame. */
- saved_frame = deprecated_selected_frame;
- saved_level = frame_relative_level (deprecated_selected_frame);
+ /* Evaluate the expression and cut the chain of values
+ produced off from the value chain.
- /* Determine if the watchpoint is within scope. */
- if (b->exp_valid_block == NULL)
- within_current_scope = 1;
- else
- {
- struct frame_info *fi;
- fi = frame_find_by_id (b->watchpoint_frame);
- within_current_scope = (fi != NULL);
- if (within_current_scope)
- select_frame (fi);
- }
+ Make sure the value returned isn't lazy; we use
+ laziness to determine what memory GDB actually needed
+ in order to compute the value of the expression. */
+ v = evaluate_expression (bpt->owner->exp);
+ VALUE_CONTENTS (v);
+ value_release_to_mark (mark);
- if (within_current_scope)
- {
- /* Evaluate the expression and cut the chain of values
- produced off from the value chain.
+ bpt->owner->val_chain = v;
+ bpt->inserted = 1;
- Make sure the value returned isn't lazy; we use
- laziness to determine what memory GDB actually needed
- in order to compute the value of the expression. */
- v = evaluate_expression (b->exp);
- VALUE_CONTENTS(v);
- value_release_to_mark (mark);
+ /* Look at each value on the value chain. */
+ for (; v; v = v->next)
+ {
+ /* If it's a memory location, and GDB actually needed
+ its contents to evaluate the expression, then we
+ must watch it. */
+ if (VALUE_LVAL (v) == lval_memory
+ && ! VALUE_LAZY (v))
+ {
+ struct type *vtype = check_typedef (VALUE_TYPE (v));
+
+ /* We only watch structs and arrays if user asked
+ for it explicitly, never if they just happen to
+ appear in the middle of some value chain. */
+ if (v == bpt->owner->val_chain
+ || (TYPE_CODE (vtype) != TYPE_CODE_STRUCT
+ && TYPE_CODE (vtype) != TYPE_CODE_ARRAY))
+ {
+ CORE_ADDR addr;
+ int len, type;
+
+ addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+ len = TYPE_LENGTH (VALUE_TYPE (v));
+ type = hw_write;
+ if (bpt->owner->type == bp_read_watchpoint)
+ type = hw_read;
+ else if (bpt->owner->type == bp_access_watchpoint)
+ type = hw_access;
+
+ val = target_insert_watchpoint (addr, len, type);
+ if (val == -1)
+ {
+ /* Don't exit the loop, try to insert
+ every value on the value chain. That's
+ because we will be removing all the
+ watches below, and removing a
+ watchpoint we didn't insert could have
+ adverse effects. */
+ bpt->inserted = 0;
+ }
+ val = 0;
+ }
+ }
+ }
+ /* Failure to insert a watchpoint on any memory value in the
+ value chain brings us here. */
+ if (!bpt->inserted)
+ {
+ remove_breakpoint (bpt, mark_uninserted);
+ *hw_breakpoint_error = 1;
+ fprintf_unfiltered (tmp_error_stream,
+ "Could not insert hardware watchpoint %d.\n",
+ bpt->owner->number);
+ val = -1;
+ }
+ }
+ else
+ {
+ printf_filtered ("Hardware watchpoint %d deleted ", bpt->owner->number);
+ printf_filtered ("because the program has left the block \n");
+ printf_filtered ("in which its expression is valid.\n");
+ if (bpt->owner->related_breakpoint)
+ bpt->owner->related_breakpoint->disposition = disp_del_at_next_stop;
+ bpt->owner->disposition = disp_del_at_next_stop;
+ }
- b->val_chain = v;
- b->inserted = 1;
+ /* Restore the selected frame. */
+ select_frame (frame_find_by_id (saved_frame_id));
- /* Look at each value on the value chain. */
- for (; v; v = v->next)
- {
- /* If it's a memory location, and GDB actually needed
- its contents to evaluate the expression, then we
- must watch it. */
- if (VALUE_LVAL (v) == lval_memory
- && ! VALUE_LAZY (v))
- {
- struct type *vtype = check_typedef (VALUE_TYPE (v));
-
- /* We only watch structs and arrays if user asked
- for it explicitly, never if they just happen to
- appear in the middle of some value chain. */
- if (v == b->val_chain
- || (TYPE_CODE (vtype) != TYPE_CODE_STRUCT
- && TYPE_CODE (vtype) != TYPE_CODE_ARRAY))
- {
- CORE_ADDR addr;
- int len, type;
-
- addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
- len = TYPE_LENGTH (VALUE_TYPE (v));
- type = hw_write;
- if (b->type == bp_read_watchpoint)
- type = hw_read;
- else if (b->type == bp_access_watchpoint)
- type = hw_access;
-
- val = target_insert_watchpoint (addr, len, type);
- if (val == -1)
- {
- /* Don't exit the loop, try to insert
- every value on the value chain. That's
- because we will be removing all the
- watches below, and removing a
- watchpoint we didn't insert could have
- adverse effects. */
- b->inserted = 0;
- }
- val = 0;
- }
- }
- }
- /* Failure to insert a watchpoint on any memory value in the
- value chain brings us here. */
- if (!b->inserted)
- {
- remove_breakpoint (b, mark_uninserted);
- hw_breakpoint_error = 1;
- fprintf_unfiltered (tmp_error_stream,
- "Could not insert hardware watchpoint %d.\n",
- b->number);
- val = -1;
- }
- }
- else
- {
- printf_filtered ("Hardware watchpoint %d deleted ", b->number);
- printf_filtered ("because the program has left the block \n");
- printf_filtered ("in which its expression is valid.\n");
- if (b->related_breakpoint)
- b->related_breakpoint->disposition = disp_del_at_next_stop;
- b->disposition = disp_del_at_next_stop;
- }
+ return val;
+ }
- /* Restore the frame and level. */
- if ((saved_frame != deprecated_selected_frame) ||
- (saved_level != frame_relative_level (deprecated_selected_frame)))
- select_frame (saved_frame);
+ else if (ep_is_exception_catchpoint (bpt->owner))
+ {
+ /* FIXME drow/2003-09-09: This code sets both a catchpoint and a
+ breakpoint. Once again, it would be better if this was represented
+ as two bp_locations. */
- if (val)
- return_val = val; /* remember failure */
- }
- else if ((b->type == bp_catch_fork
- || b->type == bp_catch_vfork
- || b->type == bp_catch_exec)
- && !b->inserted
- && !b->duplicate)
- {
- val = -1;
- switch (b->type)
- {
- case bp_catch_fork:
- val = target_insert_fork_catchpoint (PIDGET (inferior_ptid));
- break;
- case bp_catch_vfork:
- val = target_insert_vfork_catchpoint (PIDGET (inferior_ptid));
- break;
- case bp_catch_exec:
- val = target_insert_exec_catchpoint (PIDGET (inferior_ptid));
- break;
- default:
- warning ("Internal error, %s line %d.", __FILE__, __LINE__);
- break;
- }
- if (val < 0)
- {
- fprintf_unfiltered (tmp_error_stream,
- "Cannot insert catchpoint %d.", b->number);
- }
- else
- b->inserted = 1;
+ /* If we get here, we must have a callback mechanism for exception
+ events -- with g++ style embedded label support, we insert
+ ordinary breakpoints and not catchpoints. */
+ val = target_insert_breakpoint (bpt->address, bpt->shadow_contents);
+ if (val)
+ {
+ /* Couldn't set breakpoint for some reason */
+ fprintf_unfiltered (tmp_error_stream,
+ "Cannot insert catchpoint %d; disabling it.\n",
+ bpt->owner->number);
+ fprintf_filtered (tmp_error_stream,
+ "Error accessing memory address ");
+ print_address_numeric (bpt->address, 1, tmp_error_stream);
+ fprintf_filtered (tmp_error_stream, ": %s.\n",
+ safe_strerror (val));
+ bpt->owner->enable_state = bp_disabled;
+ }
+ else
+ {
+ /* Bp set, now make sure callbacks are enabled */
+ /* Format possible error msg */
+ char *message = xstrprintf ("Error inserting catchpoint %d:\n",
+ bpt->owner->number);
+ struct cleanup *cleanups = make_cleanup (xfree, message);
+ int val;
+ args_for_catchpoint_enable args;
+ args.kind = bpt->owner->type == bp_catch_catch ?
+ EX_EVENT_CATCH : EX_EVENT_THROW;
+ args.enable_p = 1;
+ val = catch_errors (cover_target_enable_exception_callback,
+ &args, message, RETURN_MASK_ALL);
+ do_cleanups (cleanups);
+ if (val != 0 && val != -1)
+ bpt->inserted = 1;
+
+ /* Check if something went wrong; val == 0 can be ignored */
+ if (val == -1)
+ {
+ /* something went wrong */
+ fprintf_unfiltered (tmp_error_stream,
+ "Cannot insert catchpoint %d; disabling it.\n",
+ bpt->owner->number);
+ bpt->owner->enable_state = bp_disabled;
+ }
+ }
- if (val)
- return_val = val; /* remember failure */
- }
- }
-
- if (return_val)
+ return val;
+ }
+
+ else if (bpt->owner->type == bp_catch_fork
+ || bpt->owner->type == bp_catch_vfork
+ || bpt->owner->type == bp_catch_exec)
+ {
+ char *prefix = xstrprintf ("warning: inserting catchpoint %d: ",
+ bpt->owner->number);
+ struct cleanup *cleanups = make_cleanup (xfree, prefix);
+ val = catch_exceptions (uiout, insert_catchpoint, bpt->owner, prefix,
+ RETURN_MASK_ERROR);
+ do_cleanups (cleanups);
+ if (val < 0)
+ bpt->owner->enable_state = bp_disabled;
+ else
+ bpt->inserted = 1;
+
+ /* We've already printed an error message if there was a problem
+ inserting this catchpoint, and we've disabled the catchpoint,
+ so just return success. */
+ return 0;
+ }
+
+ return 0;
+}
+
+/* insert_breakpoints is used when starting or continuing the program.
+ remove_breakpoints is used when the program stops.
+ Both return zero if successful,
+ or an `errno' value if could not write the inferior. */
+
+int
+insert_breakpoints (void)
+{
+ struct bp_location *b, *temp;
+ int return_val = 0; /* return success code. */
+ int val = 0;
+ int disabled_breaks = 0;
+ int hw_breakpoint_error = 0;
+ int process_warning = 0;
+
+ struct ui_file *tmp_error_stream = mem_fileopen ();
+ make_cleanup_ui_file_delete (tmp_error_stream);
+
+ /* Explicitly mark the warning -- this will only be printed if
+ there was an error. */
+ fprintf_unfiltered (tmp_error_stream, "Warning:\n");
+
+ ALL_BP_LOCATIONS_SAFE (b, temp)
+ {
+ /* Permanent breakpoints cannot be inserted or removed. Disabled
+ breakpoints should not be inserted. */
+ if (!breakpoint_enabled (b->owner))
+ continue;
+
+ /* FIXME drow/2003-10-07: This code should be pushed elsewhere when
+ hardware watchpoints are split into multiple loc breakpoints. */
+ if ((b->loc_type == bp_loc_hardware_watchpoint
+ || b->owner->type == bp_watchpoint) && !b->owner->val)
+ {
+ struct value *val;
+ val = evaluate_expression (b->owner->exp);
+ release_value (val);
+ if (VALUE_LAZY (val))
+ value_fetch_lazy (val);
+ b->owner->val = val;
+ }
+
+ val = insert_bp_location (b, tmp_error_stream,
+ &disabled_breaks, &process_warning,
+ &hw_breakpoint_error);
+ if (val)
+ return_val = val;
+ }
+
+ if (return_val)
{
/* If a hardware breakpoint or watchpoint was inserted, add a
message about possibly exhausted resources. */
- if (hw_breakpoint_error)
+ if (hw_breakpoint_error)
{
fprintf_unfiltered (tmp_error_stream,
"Could not insert hardware breakpoints:\n\
int
remove_breakpoints (void)
{
- register struct breakpoint *b;
+ struct bp_location *b;
int val;
- ALL_BREAKPOINTS (b)
+ ALL_BP_LOCATIONS (b)
{
if (b->inserted)
{
int
remove_hw_watchpoints (void)
{
- register struct breakpoint *b;
+ struct bp_location *b;
int val;
- ALL_BREAKPOINTS (b)
+ ALL_BP_LOCATIONS (b)
{
- if (b->inserted
- && (b->type == bp_hardware_watchpoint
- || b->type == bp_read_watchpoint
- || b->type == bp_access_watchpoint))
+ if (b->inserted && b->loc_type == bp_loc_hardware_watchpoint)
{
val = remove_breakpoint (b, mark_uninserted);
if (val != 0)
int
reattach_breakpoints (int pid)
{
- register struct breakpoint *b;
+ struct bp_location *b;
int val;
struct cleanup *old_chain = save_inferior_ptid ();
/* Set inferior_ptid; remove_breakpoint uses this global. */
inferior_ptid = pid_to_ptid (pid);
- ALL_BREAKPOINTS (b)
+ ALL_BP_LOCATIONS (b)
{
if (b->inserted)
{
remove_breakpoint (b, mark_inserted);
- if (b->type == bp_hardware_breakpoint)
+ if (b->loc_type == bp_loc_hardware_breakpoint)
val = target_insert_hw_breakpoint (b->address, b->shadow_contents);
else
val = target_insert_breakpoint (b->address, b->shadow_contents);
+ /* FIXME drow/2003-10-07: This doesn't handle any other kinds of
+ breakpoints. It's wrong for watchpoints, for example. */
if (val != 0)
{
do_cleanups (old_chain);
automagically. Certainly on HP-UX that's true.
Jim Blandy <jimb@redhat.com>: Actually, zero is a perfectly
- valid code address on some platforms (like the mn10200 and
- mn10300 simulators). We shouldn't assign any special
- interpretation to a breakpoint with a zero address. And in
- fact, GDB doesn't --- I can't see what that comment above is
- talking about. As far as I can tell, setting the address of a
+ valid code address on some platforms (like the mn10300
+ simulators). We shouldn't assign any special interpretation to
+ a breakpoint with a zero address. And in fact, GDB doesn't ---
+ I can't see what that comment above is talking about. As far
+ as I can tell, setting the address of a
bp_catch_exec/bp_catch_vfork/bp_catch_fork breakpoint to zero
is meaningless, since those are implemented with HP-UX kernel
hackery, not by storing breakpoint instructions somewhere. */
(b->type == bp_catch_vfork) ||
(b->type == bp_catch_fork))
{
- b->address = (CORE_ADDR) NULL;
+ b->loc->address = (CORE_ADDR) NULL;
continue;
}
unnecessary. A call to breakpoint_re_set_one always recomputes
the breakpoint's address from scratch, or deletes it if it can't.
So I think this assignment could be deleted without effect. */
- b->address = (CORE_ADDR) NULL;
+ b->loc->address = (CORE_ADDR) NULL;
}
/* FIXME what about longjmp breakpoints? Re-create them here? */
create_overlay_event_breakpoint ("_ovly_debug_event");
int
detach_breakpoints (int pid)
{
- register struct breakpoint *b;
+ struct bp_location *b;
int val;
struct cleanup *old_chain = save_inferior_ptid ();
/* Set inferior_ptid; remove_breakpoint uses this global. */
inferior_ptid = pid_to_ptid (pid);
- ALL_BREAKPOINTS (b)
+ ALL_BP_LOCATIONS (b)
{
if (b->inserted)
{
}
static int
-remove_breakpoint (struct breakpoint *b, insertion_state_t is)
+remove_breakpoint (struct bp_location *b, insertion_state_t is)
{
int val;
- if (b->enable_state == bp_permanent)
+ if (b->owner->enable_state == bp_permanent)
/* Permanent breakpoints cannot be inserted or removed. */
return 0;
- if (b->type == bp_none)
+ if (b->owner->type == bp_none)
warning ("attempted to remove apparently deleted breakpoint #%d?",
- b->number);
-
- if (b->type != bp_watchpoint
- && b->type != bp_hardware_watchpoint
- && b->type != bp_read_watchpoint
- && b->type != bp_access_watchpoint
- && b->type != bp_catch_fork
- && b->type != bp_catch_vfork
- && b->type != bp_catch_exec
- && b->type != bp_catch_catch
- && b->type != bp_catch_throw)
+ b->owner->number);
+
+ if (b->loc_type == bp_loc_software_breakpoint
+ || b->loc_type == bp_loc_hardware_breakpoint)
{
/* "Normal" instruction breakpoint: either the standard
trap-instruction bp (bp_breakpoint), or a
{
/* No overlay handling: just remove the breakpoint. */
- if (b->type == bp_hardware_breakpoint)
+ if (b->loc_type == bp_loc_hardware_breakpoint)
val = target_remove_hw_breakpoint (b->address,
b->shadow_contents);
else
b->section);
/* Ignore any failures: if the LMA is in ROM, we will
have already warned when we failed to insert it. */
- if (b->type != bp_hardware_breakpoint)
+ if (b->loc_type == bp_loc_hardware_breakpoint)
target_remove_hw_breakpoint (addr, b->shadow_contents);
else
target_remove_breakpoint (addr, b->shadow_contents);
remove the breakpoint if the section had been
unmapped, but let's not rely on that being safe. We
don't know what the overlay manager might do. */
- if (b->type == bp_hardware_breakpoint)
+ if (b->loc_type == bp_loc_hardware_breakpoint)
val = target_remove_hw_breakpoint (b->address,
b->shadow_contents);
else
return val;
b->inserted = (is == mark_inserted);
}
- else if ((b->type == bp_hardware_watchpoint ||
- b->type == bp_read_watchpoint ||
- b->type == bp_access_watchpoint)
- && b->enable_state == bp_enabled
+ else if (b->loc_type == bp_loc_hardware_watchpoint
+ && breakpoint_enabled (b->owner)
&& !b->duplicate)
{
struct value *v;
b->inserted = (is == mark_inserted);
/* Walk down the saved value chain. */
- for (v = b->val_chain; v; v = v->next)
+ for (v = b->owner->val_chain; v; v = v->next)
{
/* For each memory reference remove the watchpoint
at that address. */
{
struct type *vtype = check_typedef (VALUE_TYPE (v));
- if (v == b->val_chain
+ if (v == b->owner->val_chain
|| (TYPE_CODE (vtype) != TYPE_CODE_STRUCT
&& TYPE_CODE (vtype) != TYPE_CODE_ARRAY))
{
addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
len = TYPE_LENGTH (VALUE_TYPE (v));
type = hw_write;
- if (b->type == bp_read_watchpoint)
+ if (b->owner->type == bp_read_watchpoint)
type = hw_read;
- else if (b->type == bp_access_watchpoint)
+ else if (b->owner->type == bp_access_watchpoint)
type = hw_access;
val = target_remove_watchpoint (addr, len, type);
/* Failure to remove any of the hardware watchpoints comes here. */
if ((is == mark_uninserted) && (b->inserted))
warning ("Could not remove hardware watchpoint %d.",
- b->number);
-
- /* Free the saved value chain. We will construct a new one
- the next time the watchpoint is inserted. */
- for (v = b->val_chain; v; v = n)
- {
- n = v->next;
- value_free (v);
- }
- b->val_chain = NULL;
+ b->owner->number);
}
- else if ((b->type == bp_catch_fork ||
- b->type == bp_catch_vfork ||
- b->type == bp_catch_exec)
- && b->enable_state == bp_enabled
+ else if ((b->owner->type == bp_catch_fork ||
+ b->owner->type == bp_catch_vfork ||
+ b->owner->type == bp_catch_exec)
+ && breakpoint_enabled (b->owner)
&& !b->duplicate)
{
val = -1;
- switch (b->type)
+ switch (b->owner->type)
{
case bp_catch_fork:
val = target_remove_fork_catchpoint (PIDGET (inferior_ptid));
return val;
b->inserted = (is == mark_inserted);
}
- else if ((b->type == bp_catch_catch ||
- b->type == bp_catch_throw)
- && b->enable_state == bp_enabled
+ else if ((b->owner->type == bp_catch_catch ||
+ b->owner->type == bp_catch_throw)
+ && breakpoint_enabled (b->owner)
&& !b->duplicate)
{
return val;
b->inserted = (is == mark_inserted);
}
- else if (ep_is_exception_catchpoint (b)
+ else if (ep_is_exception_catchpoint (b->owner)
&& b->inserted /* sometimes previous insert doesn't happen */
- && b->enable_state == bp_enabled
+ && breakpoint_enabled (b->owner)
&& !b->duplicate)
{
void
mark_breakpoints_out (void)
{
- register struct breakpoint *b;
+ struct bp_location *bpt;
- ALL_BREAKPOINTS (b)
- b->inserted = 0;
+ ALL_BP_LOCATIONS (bpt)
+ bpt->inserted = 0;
}
/* Clear the "inserted" flag in all breakpoints and delete any
void
breakpoint_init_inferior (enum inf_context context)
{
- register struct breakpoint *b, *temp;
+ struct breakpoint *b, *temp;
+ struct bp_location *bpt;
static int warning_needed = 0;
+ ALL_BP_LOCATIONS (bpt)
+ bpt->inserted = 0;
+
ALL_BREAKPOINTS_SAFE (b, temp)
{
- b->inserted = 0;
-
switch (b->type)
{
case bp_call_dummy:
default:
/* Likewise for exception catchpoints in dynamic-linked
executables where required */
- if (ep_is_exception_catchpoint (b) &&
- exception_catchpoints_are_fragile)
+ if (ep_is_exception_catchpoint (b)
+ && deprecated_exception_catchpoints_are_fragile)
{
warning_needed = 1;
delete_breakpoint (b);
}
}
- if (exception_catchpoints_are_fragile)
- exception_support_initialized = 0;
+ if (deprecated_exception_catchpoints_are_fragile)
+ deprecated_exception_support_initialized = 0;
/* Don't issue the warning unless it's really needed... */
if (warning_needed && (context != inf_exited))
enum breakpoint_here
breakpoint_here_p (CORE_ADDR pc)
{
- register struct breakpoint *b;
+ struct bp_location *bpt;
int any_breakpoint_here = 0;
- ALL_BREAKPOINTS (b)
- if ((b->enable_state == bp_enabled
- || b->enable_state == bp_permanent)
- && b->address == pc) /* bp is enabled and matches pc */
- {
- if (overlay_debugging
- && section_is_overlay (b->section)
- && !section_is_mapped (b->section))
- continue; /* unmapped overlay -- can't be a match */
- else if (b->enable_state == bp_permanent)
- return permanent_breakpoint_here;
- else
- any_breakpoint_here = 1;
- }
+ ALL_BP_LOCATIONS (bpt)
+ {
+ if (bpt->loc_type != bp_loc_software_breakpoint
+ && bpt->loc_type != bp_loc_hardware_breakpoint)
+ continue;
+
+ if ((breakpoint_enabled (bpt->owner)
+ || bpt->owner->enable_state == bp_permanent)
+ && bpt->address == pc) /* bp is enabled and matches pc */
+ {
+ if (overlay_debugging
+ && section_is_overlay (bpt->section)
+ && !section_is_mapped (bpt->section))
+ continue; /* unmapped overlay -- can't be a match */
+ else if (bpt->owner->enable_state == bp_permanent)
+ return permanent_breakpoint_here;
+ else
+ any_breakpoint_here = 1;
+ }
+ }
return any_breakpoint_here ? ordinary_breakpoint_here : 0;
}
int
breakpoint_inserted_here_p (CORE_ADDR pc)
{
- register struct breakpoint *b;
+ struct bp_location *bpt;
- ALL_BREAKPOINTS (b)
- if (b->inserted
- && b->address == pc) /* bp is inserted and matches pc */
+ ALL_BP_LOCATIONS (bpt)
{
- if (overlay_debugging
- && section_is_overlay (b->section)
- && !section_is_mapped (b->section))
- continue; /* unmapped overlay -- can't be a match */
- else
- return 1;
+ if (bpt->loc_type != bp_loc_software_breakpoint
+ && bpt->loc_type != bp_loc_hardware_breakpoint)
+ continue;
+
+ if (bpt->inserted
+ && bpt->address == pc) /* bp is inserted and matches pc */
+ {
+ if (overlay_debugging
+ && section_is_overlay (bpt->section)
+ && !section_is_mapped (bpt->section))
+ continue; /* unmapped overlay -- can't be a match */
+ else
+ return 1;
+ }
}
return 0;
}
-/* Return nonzero if FRAME is a dummy frame. We can't use
- DEPRECATED_PC_IN_CALL_DUMMY because figuring out the saved SP would
- take too much time, at least using get_saved_register on the 68k.
- This means that for this function to work right a port must use the
- bp_call_dummy breakpoint. */
+/* This function returns non-zero iff there is a software breakpoint
+ inserted at PC. */
int
-deprecated_frame_in_dummy (struct frame_info *frame)
+software_breakpoint_inserted_here_p (CORE_ADDR pc)
{
- struct breakpoint *b;
+ struct bp_location *bpt;
+ int any_breakpoint_here = 0;
- if (!CALL_DUMMY_P)
- return 0;
+ ALL_BP_LOCATIONS (bpt)
+ {
+ if (bpt->loc_type != bp_loc_software_breakpoint)
+ continue;
- /* This function is used by two files: get_frame_type(), after first
- checking that !DEPRECATED_USE_GENERIC_DUMMY_FRAMES; and
- sparc-tdep.c, which doesn't yet use generic dummy frames anyway. */
- gdb_assert (!DEPRECATED_USE_GENERIC_DUMMY_FRAMES);
+ if ((breakpoint_enabled (bpt->owner)
+ || bpt->owner->enable_state == bp_permanent)
+ && bpt->inserted
+ && bpt->address == pc) /* bp is enabled and matches pc */
+ {
+ if (overlay_debugging
+ && section_is_overlay (bpt->section)
+ && !section_is_mapped (bpt->section))
+ continue; /* unmapped overlay -- can't be a match */
+ else
+ return 1;
+ }
+ }
- ALL_BREAKPOINTS (b)
- {
- if (b->type == bp_call_dummy
- && frame_id_eq (b->frame_id, get_frame_id (frame))
- /* We need to check the PC as well as the frame on the sparc,
- for signals.exp in the testsuite. */
- && (get_frame_pc (frame)
- >= (b->address
- - SIZEOF_CALL_DUMMY_WORDS / sizeof (LONGEST) * REGISTER_SIZE))
- && get_frame_pc (frame) <= b->address)
- return 1;
- }
return 0;
}
-/* breakpoint_thread_match (PC, PID) returns true if the breakpoint at
- PC is valid for process/thread PID. */
+/* breakpoint_thread_match (PC, PTID) returns true if the breakpoint at
+ PC is valid for process/thread PTID. */
int
breakpoint_thread_match (CORE_ADDR pc, ptid_t ptid)
{
- struct breakpoint *b;
+ struct bp_location *bpt;
int thread;
thread = pid_to_thread_id (ptid);
- ALL_BREAKPOINTS (b)
- if (b->enable_state != bp_disabled
- && b->enable_state != bp_shlib_disabled
- && b->enable_state != bp_call_disabled
- && b->address == pc
- && (b->thread == -1 || b->thread == thread))
- {
- if (overlay_debugging
- && section_is_overlay (b->section)
- && !section_is_mapped (b->section))
- continue; /* unmapped overlay -- can't be a match */
- else
- return 1;
+ ALL_BP_LOCATIONS (bpt)
+ {
+ if (bpt->loc_type != bp_loc_software_breakpoint
+ && bpt->loc_type != bp_loc_hardware_breakpoint)
+ continue;
+
+ if ((breakpoint_enabled (bpt->owner)
+ || bpt->owner->enable_state == bp_permanent)
+ && bpt->address == pc
+ && (bpt->owner->thread == -1 || bpt->owner->thread == thread))
+ {
+ if (overlay_debugging
+ && section_is_overlay (bpt->section)
+ && !section_is_mapped (bpt->section))
+ continue; /* unmapped overlay -- can't be a match */
+ else
+ return 1;
+ }
}
return 0;
{
tmp = (bpstat) xmalloc (sizeof (*tmp));
memcpy (tmp, bs, sizeof (*tmp));
+ if (bs->commands != NULL)
+ tmp->commands = copy_command_lines (bs->commands);
+ if (bs->old_val != NULL)
+ tmp->old_val = value_copy (bs->old_val);
+
if (p == NULL)
/* This is the first thing in the chain. */
retval = tmp;
}
/* Stub for cleaning up our state if we error-out of a breakpoint command */
-/* ARGSUSED */
static void
cleanup_executing_breakpoints (void *ignore)
{
{
bpstat bs;
struct cleanup *old_chain;
- struct command_line *cmd;
/* Avoid endless recursion if a `source' command is contained
in bs->commands. */
breakpoint_proceeded = 0;
for (; bs != NULL; bs = bs->next)
{
+ struct command_line *cmd;
+ struct cleanup *this_cmd_tree_chain;
+
+ /* Take ownership of the BSP's command tree, if it has one.
+
+ The command tree could legitimately contain commands like
+ 'step' and 'next', which call clear_proceed_status, which
+ frees stop_bpstat's command tree. To make sure this doesn't
+ free the tree we're executing out from under us, we need to
+ take ownership of the tree ourselves. Since a given bpstat's
+ commands are only executed once, we don't need to copy it; we
+ can clear the pointer in the bpstat, and make sure we free
+ the tree when we're done. */
cmd = bs->commands;
+ bs->commands = 0;
+ this_cmd_tree_chain = make_cleanup_free_command_lines (&cmd);
+
while (cmd != NULL)
{
execute_control_command (cmd);
else
cmd = cmd->next;
}
+
+ /* We can free this command tree now. */
+ do_cleanups (this_cmd_tree_chain);
+
if (breakpoint_proceeded)
/* The inferior is proceeded by the command; bomb out now.
The bpstat chain has been blown away by wait_for_inferior.
But since execution has stopped again, there is a new bpstat
to look at, so start over. */
goto top;
- else
- free_command_lines (&bs->commands);
}
do_cleanups (old_chain);
}
static enum print_stop_action
print_it_typical (bpstat bs)
{
- struct cleanup *old_chain;
+ struct cleanup *old_chain, *ui_out_chain;
struct ui_stream *stb;
stb = ui_out_stream_new (uiout);
old_chain = make_cleanup_ui_out_stream_delete (stb);
{
case bp_breakpoint:
case bp_hardware_breakpoint:
+ if (bs->breakpoint_at->loc->address != bs->breakpoint_at->loc->requested_address)
+ breakpoint_adjustment_warning (bs->breakpoint_at->loc->requested_address,
+ bs->breakpoint_at->loc->address,
+ bs->breakpoint_at->number, 1);
annotate_breakpoint (bs->breakpoint_at->number);
ui_out_text (uiout, "\nBreakpoint ");
if (ui_out_is_mi_like_p (uiout))
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string (uiout, "reason", "watchpoint-trigger");
mention (bs->breakpoint_at);
- ui_out_tuple_begin (uiout, "value");
+ ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "value");
ui_out_text (uiout, "\nOld value = ");
value_print (bs->old_val, stb->stream, 0, Val_pretty_default);
ui_out_field_stream (uiout, "old", stb);
ui_out_text (uiout, "\nNew value = ");
value_print (bs->breakpoint_at->val, stb->stream, 0, Val_pretty_default);
ui_out_field_stream (uiout, "new", stb);
- ui_out_tuple_end (uiout);
+ do_cleanups (ui_out_chain);
ui_out_text (uiout, "\n");
value_free (bs->old_val);
bs->old_val = NULL;
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string (uiout, "reason", "read-watchpoint-trigger");
mention (bs->breakpoint_at);
- ui_out_tuple_begin (uiout, "value");
+ ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "value");
ui_out_text (uiout, "\nValue = ");
value_print (bs->breakpoint_at->val, stb->stream, 0, Val_pretty_default);
ui_out_field_stream (uiout, "value", stb);
- ui_out_tuple_end (uiout);
+ do_cleanups (ui_out_chain);
ui_out_text (uiout, "\n");
return PRINT_UNKNOWN;
break;
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string (uiout, "reason", "access-watchpoint-trigger");
mention (bs->breakpoint_at);
- ui_out_tuple_begin (uiout, "value");
+ ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "value");
ui_out_text (uiout, "\nOld value = ");
value_print (bs->old_val, stb->stream, 0, Val_pretty_default);
ui_out_field_stream (uiout, "old", stb);
mention (bs->breakpoint_at);
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string (uiout, "reason", "access-watchpoint-trigger");
- ui_out_tuple_begin (uiout, "value");
+ ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "value");
ui_out_text (uiout, "\nValue = ");
}
value_print (bs->breakpoint_at->val, stb->stream, 0,Val_pretty_default);
ui_out_field_stream (uiout, "new", stb);
- ui_out_tuple_end (uiout);
+ do_cleanups (ui_out_chain);
ui_out_text (uiout, "\n");
return PRINT_UNKNOWN;
break;
break;
case print_it_normal:
- /* Normal case, we handle everything in print_it_typical. */
- return print_it_typical (bs);
+ /* Normal case. Call the breakpoint's print_it method, or
+ print_it_typical. */
+ if (bs->breakpoint_at != NULL && bs->breakpoint_at->ops != NULL
+ && bs->breakpoint_at->ops->print_it != NULL)
+ return bs->breakpoint_at->ops->print_it (bs->breakpoint_at);
+ else
+ return print_it_typical (bs);
break;
+
default:
internal_error (__FILE__, __LINE__,
"print_bp_stop_message: unrecognized enum value");
in the function but the stack frame has already been invalidated.
Since we can't rely on the values of local variables after the
stack has been destroyed, we are treating the watchpoint in that
- state as `not changed' without further checking. */
- if (within_current_scope && fr == get_current_frame ()
+ state as `not changed' without further checking.
+
+ vinschen/2003-09-04: The former implementation left out the case
+ that the watchpoint frame couldn't be found by frame_find_by_id()
+ because the current PC is currently in an epilogue. Calling
+ gdbarch_in_function_epilogue_p() also when fr == NULL fixes that. */
+ if ((!within_current_scope || fr == get_current_frame ())
&& gdbarch_in_function_epilogue_p (current_gdbarch, read_pc ()))
return WP_VALUE_NOT_CHANGED;
- if (within_current_scope)
+ if (fr && within_current_scope)
/* If we end up stopping, the current frame will get selected
in normal_stop. So this call to select_frame won't affect
the user. */
}
}
-/* Get a bpstat associated with having just stopped at address *PC
- and frame address CORE_ADDRESS. Update *PC to point at the
- breakpoint (if we hit a breakpoint). NOT_A_SW_BREAKPOINT is nonzero
- if this is known to not be a real breakpoint (it could still be a
- watchpoint, though). */
+/* Get a bpstat associated with having just stopped at address
+ BP_ADDR in thread PTID. STOPPED_BY_WATCHPOINT is true if the
+ target thinks we stopped due to a hardware watchpoint. */
/* Determine whether we stopped at a breakpoint, etc, or whether we
don't understand this stop. Result is a chain of bpstat's such that:
commands, FIXME??? fields. */
bpstat
-bpstat_stop_status (CORE_ADDR *pc, int not_a_sw_breakpoint)
+bpstat_stop_status (CORE_ADDR bp_addr, ptid_t ptid, int stopped_by_watchpoint)
{
- register struct breakpoint *b, *temp;
- CORE_ADDR bp_addr;
+ struct breakpoint *b, *temp;
/* True if we've hit a breakpoint (as opposed to a watchpoint). */
int real_breakpoint = 0;
/* Root of the chain of bpstat's */
struct bpstats root_bs[1];
/* Pointer to the last thing in the chain currently. */
bpstat bs = root_bs;
- static char message1[] =
- "Error evaluating expression for watchpoint %d\n";
- char message[sizeof (message1) + 30 /* slop */ ];
-
- /* Get the address where the breakpoint would have been. The
- "not_a_sw_breakpoint" argument is meant to distinguish between a
- breakpoint trap event and a trace/singlestep trap event. For a
- trace/singlestep trap event, we would not want to subtract
- DECR_PC_AFTER_BREAK from the PC. */
-
- bp_addr = *pc - (not_a_sw_breakpoint ? 0 : DECR_PC_AFTER_BREAK);
+ int thread_id = pid_to_thread_id (ptid);
ALL_BREAKPOINTS_SAFE (b, temp)
{
- if (b->enable_state == bp_disabled
- || b->enable_state == bp_shlib_disabled
- || b->enable_state == bp_call_disabled)
+ if (!breakpoint_enabled (b) && b->enable_state != bp_permanent)
continue;
+ /* Hardware watchpoints are treated as non-existent if the reason we
+ stopped wasn't a hardware watchpoint (we didn't stop on some data
+ address). Otherwise gdb won't stop on a break instruction in the code
+ (not from a breakpoint) when a hardware watchpoint has been defined. */
if (b->type != bp_watchpoint
- && b->type != bp_hardware_watchpoint
- && b->type != bp_read_watchpoint
- && b->type != bp_access_watchpoint
+ && !((b->type == bp_hardware_watchpoint
+ || b->type == bp_read_watchpoint
+ || b->type == bp_access_watchpoint)
+ && stopped_by_watchpoint)
&& b->type != bp_hardware_breakpoint
&& b->type != bp_catch_fork
&& b->type != bp_catch_vfork
&& b->type != bp_catch_catch
&& b->type != bp_catch_throw) /* a non-watchpoint bp */
{
- if (b->address != bp_addr) /* address doesn't match */
+ if (b->loc->address != bp_addr) /* address doesn't match */
continue;
if (overlay_debugging /* unmapped overlay section */
- && section_is_overlay (b->section)
- && !section_is_mapped (b->section))
+ && section_is_overlay (b->loc->section)
+ && !section_is_mapped (b->loc->section))
continue;
}
if (b->type == bp_hardware_breakpoint)
{
- if (b->address != (*pc - DECR_PC_AFTER_HW_BREAK))
+ if (b->loc->address != bp_addr)
continue;
if (overlay_debugging /* unmapped overlay section */
- && section_is_overlay (b->section)
- && !section_is_mapped (b->section))
+ && section_is_overlay (b->loc->section)
+ && !section_is_mapped (b->loc->section))
continue;
}
bs->stop = 1;
bs->print = 1;
- sprintf (message, message1, b->number);
if (b->type == bp_watchpoint ||
b->type == bp_hardware_watchpoint)
{
- switch (catch_errors (watchpoint_check, bs, message,
- RETURN_MASK_ALL))
+ char *message = xstrprintf ("Error evaluating expression for watchpoint %d\n",
+ b->number);
+ struct cleanup *cleanups = make_cleanup (xfree, message);
+ int e = catch_errors (watchpoint_check, bs, message,
+ RETURN_MASK_ALL);
+ do_cleanups (cleanups);
+ switch (e)
{
case WP_DELETED:
/* We've already printed what needs to be printed. */
}
}
if (found)
- switch (catch_errors (watchpoint_check, bs, message,
- RETURN_MASK_ALL))
- {
- case WP_DELETED:
- /* We've already printed what needs to be printed. */
- bs->print_it = print_it_done;
- /* Stop. */
- break;
- case WP_VALUE_CHANGED:
- if (b->type == bp_read_watchpoint)
- {
- /* Don't stop: read watchpoints shouldn't fire if
- the value has changed. This is for targets which
- cannot set read-only watchpoints. */
- bs->print_it = print_it_noop;
- bs->stop = 0;
- continue;
- }
- ++(b->hit_count);
- break;
- case WP_VALUE_NOT_CHANGED:
- /* Stop. */
- ++(b->hit_count);
- break;
- default:
- /* Can't happen. */
- case 0:
- /* Error from catch_errors. */
- printf_filtered ("Watchpoint %d deleted.\n", b->number);
- if (b->related_breakpoint)
- b->related_breakpoint->disposition = disp_del_at_next_stop;
- b->disposition = disp_del_at_next_stop;
- /* We've already printed what needs to be printed. */
- bs->print_it = print_it_done;
- break;
- }
+ {
+ char *message = xstrprintf ("Error evaluating expression for watchpoint %d\n",
+ b->number);
+ struct cleanup *cleanups = make_cleanup (xfree, message);
+ int e = catch_errors (watchpoint_check, bs, message,
+ RETURN_MASK_ALL);
+ do_cleanups (cleanups);
+ switch (e)
+ {
+ case WP_DELETED:
+ /* We've already printed what needs to be printed. */
+ bs->print_it = print_it_done;
+ /* Stop. */
+ break;
+ case WP_VALUE_CHANGED:
+ if (b->type == bp_read_watchpoint)
+ {
+ /* Don't stop: read watchpoints shouldn't fire if
+ the value has changed. This is for targets
+ which cannot set read-only watchpoints. */
+ bs->print_it = print_it_noop;
+ bs->stop = 0;
+ continue;
+ }
+ ++(b->hit_count);
+ break;
+ case WP_VALUE_NOT_CHANGED:
+ /* Stop. */
+ ++(b->hit_count);
+ break;
+ default:
+ /* Can't happen. */
+ case 0:
+ /* Error from catch_errors. */
+ printf_filtered ("Watchpoint %d deleted.\n", b->number);
+ if (b->related_breakpoint)
+ b->related_breakpoint->disposition = disp_del_at_next_stop;
+ b->disposition = disp_del_at_next_stop;
+ /* We've already printed what needs to be printed. */
+ bs->print_it = print_it_done;
+ break;
+ }
+ }
else /* found == 0 */
{
/* This is a case where some watchpoint(s) triggered,
/* Don't consider this a hit. */
--(b->hit_count);
}
+ else if (b->thread != -1 && b->thread != thread_id)
+ {
+ bs->stop = 0;
+ /* Don't consider this a hit. */
+ --(b->hit_count);
+ }
else if (b->ignore_count > 0)
{
b->ignore_count--;
/* We will stop here */
if (b->disposition == disp_disable)
b->enable_state = bp_disabled;
- bs->commands = copy_command_lines (b->commands);
if (b->silent)
bs->print = 0;
+ bs->commands = b->commands;
if (bs->commands &&
- (STREQ ("silent", bs->commands->line) ||
- (xdb_commands && STREQ ("Q", bs->commands->line))))
+ (strcmp ("silent", bs->commands->line) == 0
+ || (xdb_commands && strcmp ("Q", bs->commands->line) == 0)))
{
bs->commands = bs->commands->next;
bs->print = 0;
}
+ bs->commands = copy_command_lines (bs->commands);
}
}
/* Print nothing for this entry if we dont stop or if we dont print. */
bs->print_it = print_it_noop;
}
- bs->next = NULL; /* Terminate the chain */
- bs = root_bs->next; /* Re-grab the head of the chain */
-
- if (real_breakpoint && bs)
- {
- if (bs->breakpoint_at->type == bp_hardware_breakpoint)
- {
- if (DECR_PC_AFTER_HW_BREAK != 0)
- {
- *pc = *pc - DECR_PC_AFTER_HW_BREAK;
- write_pc (*pc);
- }
- }
- else
- {
- if (DECR_PC_AFTER_BREAK != 0 || must_shift_inst_regs)
- {
- *pc = bp_addr;
-#if defined (SHIFT_INST_REGS)
- SHIFT_INST_REGS ();
-#else /* No SHIFT_INST_REGS. */
- write_pc (bp_addr);
-#endif /* No SHIFT_INST_REGS. */
- }
- }
- }
+ bs->next = NULL; /* Terminate the chain */
+ bs = root_bs->next; /* Re-grab the head of the chain */
/* The value of a hardware watchpoint hasn't changed, but the
intermediate memory locations we are watching may have. */
/* step_resume entries: a step resume breakpoint overrides another
breakpoint of signal handling (see comment in wait_for_inferior
- at first PC_IN_SIGTRAMP where we set the step_resume breakpoint). */
+ at where we set the step_resume breakpoint). */
/* We handle the through_sigtramp_breakpoint the same way; having both
one of those and a step_resume_breakpoint is probably very rare (?). */
{
struct breakpoint *b;
ALL_BREAKPOINTS (b)
- if (b->enable_state == bp_enabled && b->type == bp_watchpoint)
+ if (breakpoint_enabled (b) && b->type == bp_watchpoint)
return 1;
return 0;
}
int
bpstat_have_active_hw_watchpoints (void)
{
- struct breakpoint *b;
- ALL_BREAKPOINTS (b)
- if ((b->enable_state == bp_enabled) &&
- (b->inserted) &&
- ((b->type == bp_hardware_watchpoint) ||
- (b->type == bp_read_watchpoint) ||
- (b->type == bp_access_watchpoint)))
+ struct bp_location *bpt;
+ ALL_BP_LOCATIONS (bpt)
+ if (breakpoint_enabled (bpt->owner)
+ && bpt->inserted
+ && bpt->loc_type == bp_loc_hardware_watchpoint)
return 1;
return 0;
}
print_one_breakpoint (struct breakpoint *b,
CORE_ADDR *last_addr)
{
- register struct command_line *l;
- register struct symbol *sym;
+ struct command_line *l;
+ struct symbol *sym;
struct ep_type_description
{
enum bptype type;
char wrap_indent[80];
struct ui_stream *stb = ui_out_stream_new (uiout);
struct cleanup *old_chain = make_cleanup_ui_out_stream_delete (stb);
+ struct cleanup *bkpt_chain;
annotate_record ();
- ui_out_tuple_begin (uiout, "bkpt");
+ bkpt_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "bkpt");
/* 1 */
annotate_field (0);
else
strcat (wrap_indent, " ");
}
- switch (b->type)
- {
- case bp_none:
- internal_error (__FILE__, __LINE__,
- "print_one_breakpoint: bp_none encountered\n");
- break;
- case bp_watchpoint:
- case bp_hardware_watchpoint:
- case bp_read_watchpoint:
- case bp_access_watchpoint:
- /* Field 4, the address, is omitted (which makes the columns
- not line up too nicely with the headers, but the effect
- is relatively readable). */
- if (addressprint)
- ui_out_field_skip (uiout, "addr");
- annotate_field (5);
- print_expression (b->exp, stb->stream);
- ui_out_field_stream (uiout, "what", stb);
- break;
-
- case bp_catch_load:
- case bp_catch_unload:
- /* Field 4, the address, is omitted (which makes the columns
- not line up too nicely with the headers, but the effect
- is relatively readable). */
- if (addressprint)
- ui_out_field_skip (uiout, "addr");
- annotate_field (5);
- if (b->dll_pathname == NULL)
- {
- ui_out_field_string (uiout, "what", "<any library>");
- ui_out_spaces (uiout, 1);
- }
- else
- {
- ui_out_text (uiout, "library \"");
- ui_out_field_string (uiout, "what", b->dll_pathname);
- ui_out_text (uiout, "\" ");
- }
- break;
-
- case bp_catch_fork:
- case bp_catch_vfork:
- /* Field 4, the address, is omitted (which makes the columns
- not line up too nicely with the headers, but the effect
- is relatively readable). */
- if (addressprint)
- ui_out_field_skip (uiout, "addr");
- annotate_field (5);
- if (b->forked_inferior_pid != 0)
- {
- ui_out_text (uiout, "process ");
- ui_out_field_int (uiout, "what", b->forked_inferior_pid);
- ui_out_spaces (uiout, 1);
- }
-
- case bp_catch_exec:
- /* Field 4, the address, is omitted (which makes the columns
- not line up too nicely with the headers, but the effect
- is relatively readable). */
- if (addressprint)
- ui_out_field_skip (uiout, "addr");
- annotate_field (5);
- if (b->exec_pathname != NULL)
- {
- ui_out_text (uiout, "program \"");
- ui_out_field_string (uiout, "what", b->exec_pathname);
- ui_out_text (uiout, "\" ");
- }
- break;
+ if (b->ops != NULL && b->ops->print_one != NULL)
+ b->ops->print_one (b, last_addr);
+ else
+ switch (b->type)
+ {
+ case bp_none:
+ internal_error (__FILE__, __LINE__,
+ "print_one_breakpoint: bp_none encountered\n");
+ break;
- case bp_catch_catch:
- /* Field 4, the address, is omitted (which makes the columns
- not line up too nicely with the headers, but the effect
- is relatively readable). */
- if (addressprint)
- ui_out_field_skip (uiout, "addr");
- annotate_field (5);
- ui_out_field_string (uiout, "what", "exception catch");
- ui_out_spaces (uiout, 1);
- break;
+ case bp_watchpoint:
+ case bp_hardware_watchpoint:
+ case bp_read_watchpoint:
+ case bp_access_watchpoint:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
+ if (addressprint)
+ ui_out_field_skip (uiout, "addr");
+ annotate_field (5);
+ print_expression (b->exp, stb->stream);
+ ui_out_field_stream (uiout, "what", stb);
+ break;
+
+ case bp_catch_load:
+ case bp_catch_unload:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
+ if (addressprint)
+ ui_out_field_skip (uiout, "addr");
+ annotate_field (5);
+ if (b->dll_pathname == NULL)
+ {
+ ui_out_field_string (uiout, "what", "<any library>");
+ ui_out_spaces (uiout, 1);
+ }
+ else
+ {
+ ui_out_text (uiout, "library \"");
+ ui_out_field_string (uiout, "what", b->dll_pathname);
+ ui_out_text (uiout, "\" ");
+ }
+ break;
+
+ case bp_catch_fork:
+ case bp_catch_vfork:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
+ if (addressprint)
+ ui_out_field_skip (uiout, "addr");
+ annotate_field (5);
+ if (b->forked_inferior_pid != 0)
+ {
+ ui_out_text (uiout, "process ");
+ ui_out_field_int (uiout, "what", b->forked_inferior_pid);
+ ui_out_spaces (uiout, 1);
+ }
+
+ case bp_catch_exec:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
+ if (addressprint)
+ ui_out_field_skip (uiout, "addr");
+ annotate_field (5);
+ if (b->exec_pathname != NULL)
+ {
+ ui_out_text (uiout, "program \"");
+ ui_out_field_string (uiout, "what", b->exec_pathname);
+ ui_out_text (uiout, "\" ");
+ }
+ break;
+
+ case bp_catch_catch:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
+ if (addressprint)
+ ui_out_field_skip (uiout, "addr");
+ annotate_field (5);
+ ui_out_field_string (uiout, "what", "exception catch");
+ ui_out_spaces (uiout, 1);
+ break;
+
+ case bp_catch_throw:
+ /* Field 4, the address, is omitted (which makes the columns
+ not line up too nicely with the headers, but the effect
+ is relatively readable). */
+ if (addressprint)
+ ui_out_field_skip (uiout, "addr");
+ annotate_field (5);
+ ui_out_field_string (uiout, "what", "exception throw");
+ ui_out_spaces (uiout, 1);
+ break;
+
+ case bp_breakpoint:
+ case bp_hardware_breakpoint:
+ case bp_until:
+ case bp_finish:
+ case bp_longjmp:
+ case bp_longjmp_resume:
+ case bp_step_resume:
+ case bp_through_sigtramp:
+ case bp_watchpoint_scope:
+ case bp_call_dummy:
+ case bp_shlib_event:
+ case bp_thread_event:
+ case bp_overlay_event:
+ if (addressprint)
+ {
+ annotate_field (4);
+ if (b->pending)
+ ui_out_field_string (uiout, "addr", "<PENDING>");
+ else
+ ui_out_field_core_addr (uiout, "addr", b->loc->address);
+ }
+ annotate_field (5);
+ *last_addr = b->loc->address;
+ if (b->source_file)
+ {
+ sym = find_pc_sect_function (b->loc->address, b->loc->section);
+ if (sym)
+ {
+ ui_out_text (uiout, "in ");
+ ui_out_field_string (uiout, "func",
+ SYMBOL_PRINT_NAME (sym));
+ ui_out_wrap_hint (uiout, wrap_indent);
+ ui_out_text (uiout, " at ");
+ }
+ ui_out_field_string (uiout, "file", b->source_file);
+ ui_out_text (uiout, ":");
+ ui_out_field_int (uiout, "line", b->line_number);
+ }
+ else if (b->pending)
+ {
+ ui_out_field_string (uiout, "pending", b->addr_string);
+ }
+ else
+ {
+ print_address_symbolic (b->loc->address, stb->stream, demangle, "");
+ ui_out_field_stream (uiout, "at", stb);
+ }
+ break;
+ }
- case bp_catch_throw:
- /* Field 4, the address, is omitted (which makes the columns
- not line up too nicely with the headers, but the effect
- is relatively readable). */
- if (addressprint)
- ui_out_field_skip (uiout, "addr");
- annotate_field (5);
- ui_out_field_string (uiout, "what", "exception throw");
- ui_out_spaces (uiout, 1);
- break;
-
- case bp_breakpoint:
- case bp_hardware_breakpoint:
- case bp_until:
- case bp_finish:
- case bp_longjmp:
- case bp_longjmp_resume:
- case bp_step_resume:
- case bp_through_sigtramp:
- case bp_watchpoint_scope:
- case bp_call_dummy:
- case bp_shlib_event:
- case bp_thread_event:
- case bp_overlay_event:
- if (addressprint)
- {
- annotate_field (4);
- ui_out_field_core_addr (uiout, "addr", b->address);
- }
- annotate_field (5);
- *last_addr = b->address;
- if (b->source_file)
- {
- sym = find_pc_sect_function (b->address, b->section);
- if (sym)
- {
- ui_out_text (uiout, "in ");
- ui_out_field_string (uiout, "func",
- SYMBOL_SOURCE_NAME (sym));
- ui_out_wrap_hint (uiout, wrap_indent);
- ui_out_text (uiout, " at ");
- }
- ui_out_field_string (uiout, "file", b->source_file);
- ui_out_text (uiout, ":");
- ui_out_field_int (uiout, "line", b->line_number);
- }
- else
- {
- print_address_symbolic (b->address, stb->stream, demangle, "");
- ui_out_field_stream (uiout, "at", stb);
- }
- break;
- }
-
if (b->thread != -1)
{
/* FIXME: This seems to be redundant and lost here; see the
ui_out_text (uiout, "\tstop only in stack frame at ");
/* FIXME: cagney/2002-12-01: Shouldn't be poeking around inside
the frame ID. */
- ui_out_field_core_addr (uiout, "frame", b->frame_id.base);
+ ui_out_field_core_addr (uiout, "frame", b->frame_id.stack_addr);
ui_out_text (uiout, "\n");
}
ui_out_field_stream (uiout, "cond", stb);
ui_out_text (uiout, "\n");
}
-
+
+ if (b->pending && b->cond_string)
+ {
+ annotate_field (7);
+ ui_out_text (uiout, "\tstop only if ");
+ ui_out_field_string (uiout, "cond", b->cond_string);
+ ui_out_text (uiout, "\n");
+ }
+
if (b->thread != -1)
{
/* FIXME should make an annotation for this */
if ((l = b->commands))
{
+ struct cleanup *script_chain;
+
annotate_field (9);
- ui_out_tuple_begin (uiout, "script");
+ script_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "script");
print_command_lines (uiout, l, 4);
- ui_out_tuple_end (uiout);
+ do_cleanups (script_chain);
}
- ui_out_tuple_end (uiout);
+ do_cleanups (bkpt_chain);
do_cleanups (old_chain);
}
do_captured_breakpoint_query (struct ui_out *uiout, void *data)
{
struct captured_breakpoint_query_args *args = data;
- register struct breakpoint *b;
+ struct breakpoint *b;
CORE_ADDR dummy_addr = 0;
ALL_BREAKPOINTS (b)
{
static void
breakpoint_1 (int bnum, int allflag)
{
- register struct breakpoint *b;
+ struct breakpoint *b;
CORE_ADDR last_addr = (CORE_ADDR) -1;
int nr_printable_breakpoints;
+ struct cleanup *bkpttbl_chain;
/* Compute the number of rows in the table. */
nr_printable_breakpoints = 0;
}
if (addressprint)
- ui_out_table_begin (uiout, 6, nr_printable_breakpoints, "BreakpointTable");
+ bkpttbl_chain
+ = make_cleanup_ui_out_table_begin_end (uiout, 6, nr_printable_breakpoints,
+ "BreakpointTable");
else
- ui_out_table_begin (uiout, 5, nr_printable_breakpoints, "BreakpointTable");
+ bkpttbl_chain
+ = make_cleanup_ui_out_table_begin_end (uiout, 5, nr_printable_breakpoints,
+ "BreakpointTable");
if (nr_printable_breakpoints > 0)
annotate_breakpoints_headers ();
print_one_breakpoint (b, &last_addr);
}
- ui_out_table_end (uiout);
+ do_cleanups (bkpttbl_chain);
if (nr_printable_breakpoints == 0)
{
annotate_breakpoints_table_end ();
}
-/* ARGSUSED */
static void
breakpoints_info (char *bnum_exp, int from_tty)
{
breakpoint_1 (bnum, 0);
}
-/* ARGSUSED */
static void
maintenance_info_breakpoints (char *bnum_exp, int from_tty)
{
static void
describe_other_breakpoints (CORE_ADDR pc, asection *section)
{
- register int others = 0;
- register struct breakpoint *b;
+ int others = 0;
+ struct breakpoint *b;
ALL_BREAKPOINTS (b)
- if (b->address == pc) /* address match / overlay match */
- if (!overlay_debugging || b->section == section)
+ if (b->loc->address == pc) /* address match / overlay match */
+ if (!b->pending && (!overlay_debugging || b->loc->section == section))
others++;
if (others > 0)
{
printf_filtered ("Note: breakpoint%s ", (others > 1) ? "s" : "");
ALL_BREAKPOINTS (b)
- if (b->address == pc) /* address match / overlay match */
- if (!overlay_debugging || b->section == section)
+ if (b->loc->address == pc) /* address match / overlay match */
+ if (!b->pending && (!overlay_debugging || b->loc->section == section))
{
others--;
printf_filtered ("%d%s%s ",
static void
check_duplicates (struct breakpoint *bpt)
{
- register struct breakpoint *b;
- register int count = 0;
- struct breakpoint *perm_bp = 0;
- CORE_ADDR address = bpt->address;
- asection *section = bpt->section;
+ struct bp_location *b;
+ int count = 0;
+ struct bp_location *perm_bp = 0;
+ CORE_ADDR address = bpt->loc->address;
+ asection *section = bpt->loc->section;
if (! breakpoint_address_is_meaningful (bpt))
return;
- ALL_BREAKPOINTS (b)
- if (b->enable_state != bp_disabled
- && b->enable_state != bp_shlib_disabled
- && b->enable_state != bp_call_disabled
+ ALL_BP_LOCATIONS (b)
+ if (b->owner->enable_state != bp_disabled
+ && b->owner->enable_state != bp_shlib_disabled
+ && !b->owner->pending
+ && b->owner->enable_state != bp_call_disabled
&& b->address == address /* address / overlay match */
&& (!overlay_debugging || b->section == section)
- && breakpoint_address_is_meaningful (b))
+ && breakpoint_address_is_meaningful (b->owner))
{
/* Have we found a permanent breakpoint? */
- if (b->enable_state == bp_permanent)
+ if (b->owner->enable_state == bp_permanent)
{
perm_bp = b;
break;
"allegedly permanent breakpoint is not "
"actually inserted");
- ALL_BREAKPOINTS (b)
+ ALL_BP_LOCATIONS (b)
if (b != perm_bp)
{
- if (b->inserted)
- internal_error (__FILE__, __LINE__,
- "another breakpoint was inserted on top of "
- "a permanent breakpoint");
-
- if (b->enable_state != bp_disabled
- && b->enable_state != bp_shlib_disabled
- && b->enable_state != bp_call_disabled
+ if (b->owner->enable_state != bp_disabled
+ && b->owner->enable_state != bp_shlib_disabled
+ && !b->owner->pending
+ && b->owner->enable_state != bp_call_disabled
&& b->address == address /* address / overlay match */
&& (!overlay_debugging || b->section == section)
- && breakpoint_address_is_meaningful (b))
- b->duplicate = 1;
+ && breakpoint_address_is_meaningful (b->owner))
+ {
+ if (b->inserted)
+ internal_error (__FILE__, __LINE__,
+ "another breakpoint was inserted on top of "
+ "a permanent breakpoint");
+
+ b->duplicate = 1;
+ }
}
}
}
+static void
+breakpoint_adjustment_warning (CORE_ADDR from_addr, CORE_ADDR to_addr,
+ int bnum, int have_bnum)
+{
+ char astr1[40];
+ char astr2[40];
+
+ strcpy (astr1, local_hex_string_custom ((unsigned long) from_addr, "08l"));
+ strcpy (astr2, local_hex_string_custom ((unsigned long) to_addr, "08l"));
+ if (have_bnum)
+ warning ("Breakpoint %d address previously adjusted from %s to %s.",
+ bnum, astr1, astr2);
+ else
+ warning ("Breakpoint address adjusted from %s to %s.", astr1, astr2);
+}
+
+/* Adjust a breakpoint's address to account for architectural constraints
+ on breakpoint placement. Return the adjusted address. Note: Very
+ few targets require this kind of adjustment. For most targets,
+ this function is simply the identity function. */
+
+static CORE_ADDR
+adjust_breakpoint_address (CORE_ADDR bpaddr, enum bptype bptype)
+{
+ if (!gdbarch_adjust_breakpoint_address_p (current_gdbarch))
+ {
+ /* Very few targets need any kind of breakpoint adjustment. */
+ return bpaddr;
+ }
+ else if (bptype == bp_watchpoint
+ || bptype == bp_hardware_watchpoint
+ || bptype == bp_read_watchpoint
+ || bptype == bp_access_watchpoint
+ || bptype == bp_catch_fork
+ || bptype == bp_catch_vfork
+ || bptype == bp_catch_exec)
+ {
+ /* Watchpoints and the various bp_catch_* eventpoints should not
+ have their addresses modified. */
+ return bpaddr;
+ }
+ else
+ {
+ CORE_ADDR adjusted_bpaddr;
+
+ /* Some targets have architectural constraints on the placement
+ of breakpoint instructions. Obtain the adjusted address. */
+ adjusted_bpaddr = gdbarch_adjust_breakpoint_address (current_gdbarch,
+ bpaddr);
+
+ /* An adjusted breakpoint address can significantly alter
+ a user's expectations. Print a warning if an adjustment
+ is required. */
+ if (adjusted_bpaddr != bpaddr)
+ breakpoint_adjustment_warning (bpaddr, adjusted_bpaddr, 0, 0);
+
+ return adjusted_bpaddr;
+ }
+}
+
+/* Allocate a struct bp_location. */
+
+static struct bp_location *
+allocate_bp_location (struct breakpoint *bpt, enum bptype bp_type)
+{
+ struct bp_location *loc, *loc_p;
+
+ loc = xmalloc (sizeof (struct bp_location));
+ memset (loc, 0, sizeof (*loc));
+
+ loc->owner = bpt;
+
+ switch (bp_type)
+ {
+ case bp_breakpoint:
+ case bp_until:
+ case bp_finish:
+ case bp_longjmp:
+ case bp_longjmp_resume:
+ case bp_step_resume:
+ case bp_through_sigtramp:
+ case bp_watchpoint_scope:
+ case bp_call_dummy:
+ case bp_shlib_event:
+ case bp_thread_event:
+ case bp_overlay_event:
+ case bp_catch_load:
+ case bp_catch_unload:
+ loc->loc_type = bp_loc_software_breakpoint;
+ break;
+ case bp_hardware_breakpoint:
+ loc->loc_type = bp_loc_hardware_breakpoint;
+ break;
+ case bp_hardware_watchpoint:
+ case bp_read_watchpoint:
+ case bp_access_watchpoint:
+ loc->loc_type = bp_loc_hardware_watchpoint;
+ break;
+ case bp_watchpoint:
+ case bp_catch_fork:
+ case bp_catch_vfork:
+ case bp_catch_exec:
+ case bp_catch_catch:
+ case bp_catch_throw:
+ loc->loc_type = bp_loc_other;
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, "unknown breakpoint type");
+ }
+
+ /* Add this breakpoint to the end of the chain. */
+
+ loc_p = bp_location_chain;
+ if (loc_p == 0)
+ bp_location_chain = loc;
+ else
+ {
+ while (loc_p->next)
+ loc_p = loc_p->next;
+ loc_p->next = loc;
+ }
+
+ return loc;
+}
+
/* set_raw_breakpoint() is a low level routine for allocating and
partially initializing a breakpoint of type BPTYPE. The newly
created breakpoint's address, section, source file name, and line
struct breakpoint *
set_raw_breakpoint (struct symtab_and_line sal, enum bptype bptype)
{
- register struct breakpoint *b, *b1;
+ struct breakpoint *b, *b1;
b = (struct breakpoint *) xmalloc (sizeof (struct breakpoint));
memset (b, 0, sizeof (*b));
- b->address = sal.pc;
+ b->loc = allocate_bp_location (b, bptype);
+ b->loc->requested_address = sal.pc;
+ b->loc->address = adjust_breakpoint_address (b->loc->requested_address,
+ bptype);
if (sal.symtab == NULL)
b->source_file = NULL;
else
b->source_file = savestring (sal.symtab->filename,
strlen (sal.symtab->filename));
- b->section = sal.section;
+ b->loc->section = sal.section;
b->type = bptype;
b->language = current_language->la_language;
b->input_radix = input_radix;
b->triggered_dll_pathname = NULL;
b->forked_inferior_pid = 0;
b->exec_pathname = NULL;
+ b->ops = NULL;
+ b->pending = 0;
/* Add this breakpoint to the end of the chain
so that a list of breakpoints will come out in order
b->enable_state = bp_permanent;
/* By definition, permanent breakpoints are already present in the code. */
- b->inserted = 1;
+ b->loc->inserted = 1;
}
static struct breakpoint *
b = create_internal_breakpoint (0, bp_longjmp_resume);
else
{
- if ((m = lookup_minimal_symbol_text (func_name, NULL, NULL)) == NULL)
+ if ((m = lookup_minimal_symbol_text (func_name, NULL)) == NULL)
return;
b = create_internal_breakpoint (SYMBOL_VALUE_ADDRESS (m), bp_longjmp);
void
enable_longjmp_breakpoint (void)
{
- register struct breakpoint *b;
+ struct breakpoint *b;
ALL_BREAKPOINTS (b)
if (b->type == bp_longjmp)
void
disable_longjmp_breakpoint (void)
{
- register struct breakpoint *b;
+ struct breakpoint *b;
ALL_BREAKPOINTS (b)
if (b->type == bp_longjmp
struct breakpoint *b;
struct minimal_symbol *m;
- if ((m = lookup_minimal_symbol_text (func_name, NULL, NULL)) == NULL)
+ if ((m = lookup_minimal_symbol_text (func_name, NULL)) == NULL)
return;
b = create_internal_breakpoint (SYMBOL_VALUE_ADDRESS (m),
void
enable_overlay_breakpoints (void)
{
- register struct breakpoint *b;
+ struct breakpoint *b;
ALL_BREAKPOINTS (b)
if (b->type == bp_overlay_event)
void
disable_overlay_breakpoints (void)
{
- register struct breakpoint *b;
+ struct breakpoint *b;
ALL_BREAKPOINTS (b)
if (b->type == bp_overlay_event)
b->enable_state = bp_enabled;
/* addr_string has to be used or breakpoint_re_set will delete me. */
- xasprintf (&b->addr_string, "*0x%s", paddr (b->address));
+ xasprintf (&b->addr_string, "*0x%s", paddr (b->loc->address));
return b;
}
delete_breakpoint (b);
}
+struct captured_parse_breakpoint_args
+ {
+ char **arg_p;
+ struct symtabs_and_lines *sals_p;
+ char ***addr_string_p;
+ int *not_found_ptr;
+ };
+
+struct lang_and_radix
+ {
+ enum language lang;
+ int radix;
+ };
+
+/* Cleanup helper routine to restore the current language and
+ input radix. */
+static void
+do_restore_lang_radix_cleanup (void *old)
+{
+ struct lang_and_radix *p = old;
+ set_language (p->lang);
+ input_radix = p->radix;
+}
+
+/* Try and resolve a pending breakpoint. */
+static int
+resolve_pending_breakpoint (struct breakpoint *b)
+{
+ /* Try and reparse the breakpoint in case the shared library
+ is now loaded. */
+ struct symtabs_and_lines sals;
+ struct symtab_and_line pending_sal;
+ char **cond_string = (char **) NULL;
+ char *copy_arg = b->addr_string;
+ char **addr_string;
+ char *errmsg;
+ int rc;
+ int not_found = 0;
+ struct ui_file *old_gdb_stderr;
+ struct lang_and_radix old_lr;
+ struct cleanup *old_chain;
+
+ /* Set language, input-radix, then reissue breakpoint command.
+ Ensure the language and input-radix are restored afterwards. */
+ old_lr.lang = current_language->la_language;
+ old_lr.radix = input_radix;
+ old_chain = make_cleanup (do_restore_lang_radix_cleanup, &old_lr);
+
+ set_language (b->language);
+ input_radix = b->input_radix;
+ rc = break_command_1 (b->addr_string, b->flag, b->from_tty, b);
+
+ if (rc == GDB_RC_OK)
+ /* Pending breakpoint has been resolved. */
+ printf_filtered ("Pending breakpoint \"%s\" resolved\n", b->addr_string);
+
+ do_cleanups (old_chain);
+ return rc;
+}
+
#ifdef SOLIB_ADD
void
remove_solib_event_breakpoints (void)
{
- register struct breakpoint *b, *temp;
+ struct breakpoint *b, *temp;
ALL_BREAKPOINTS_SAFE (b, temp)
if (b->type == bp_shlib_event)
#if defined (PC_SOLIB)
if (((b->type == bp_breakpoint) ||
(b->type == bp_hardware_breakpoint)) &&
- b->enable_state == bp_enabled &&
- !b->duplicate &&
- PC_SOLIB (b->address))
+ breakpoint_enabled (b) &&
+ !b->loc->duplicate &&
+ PC_SOLIB (b->loc->address))
{
b->enable_state = bp_shlib_disabled;
if (!silent)
void
re_enable_breakpoints_in_shlibs (void)
{
- struct breakpoint *b;
+ struct breakpoint *b, *tmp;
- ALL_BREAKPOINTS (b)
+ ALL_BREAKPOINTS_SAFE (b, tmp)
+ {
if (b->enable_state == bp_shlib_disabled)
- {
- char buf[1];
-
- /* Do not reenable the breakpoint if the shared library
- is still not mapped in. */
- if (target_read_memory (b->address, buf, 1) == 0)
- b->enable_state = bp_enabled;
- }
+ {
+ char buf[1], *lib;
+
+ /* Do not reenable the breakpoint if the shared library
+ is still not mapped in. */
+ lib = PC_SOLIB (b->loc->address);
+ if (lib != NULL && target_read_memory (b->loc->address, buf, 1) == 0)
+ b->enable_state = bp_enabled;
+ }
+ else if (b->pending && (b->enable_state == bp_enabled))
+ {
+ if (resolve_pending_breakpoint (b) == GDB_RC_OK)
+ delete_breakpoint (b);
+ }
+ }
}
#endif
int thread = -1; /* All threads. */
/* Set a breakpoint on the specified hook. */
- sals = decode_line_1 (&hookname, 1, (struct symtab *) NULL, 0, &canonical);
+ sals = decode_line_1 (&hookname, 1, (struct symtab *) NULL, 0, &canonical, NULL);
addr_end = hookname;
if (sals.nelts == 0)
static int
hw_breakpoint_used_count (void)
{
- register struct breakpoint *b;
+ struct breakpoint *b;
int i = 0;
ALL_BREAKPOINTS (b)
static int
hw_watchpoint_used_count (enum bptype type, int *other_type_used)
{
- register struct breakpoint *b;
+ struct breakpoint *b;
int i = 0;
*other_type_used = 0;
ALL_BREAKPOINTS (b)
{
- if (b->enable_state == bp_enabled)
+ if (breakpoint_enabled (b))
{
if (b->type == type)
i++;
else if ((b->type == bp_hardware_watchpoint ||
b->type == bp_read_watchpoint ||
- b->type == bp_access_watchpoint)
- && b->enable_state == bp_enabled)
+ b->type == bp_access_watchpoint))
*other_type_used = 1;
}
}
void
set_longjmp_resume_breakpoint (CORE_ADDR pc, struct frame_id frame_id)
{
- register struct breakpoint *b;
+ struct breakpoint *b;
ALL_BREAKPOINTS (b)
if (b->type == bp_longjmp_resume)
{
- b->address = pc;
+ b->loc->requested_address = pc;
+ b->loc->address = adjust_breakpoint_address (b->loc->requested_address,
+ b->type);
b->enable_state = bp_enabled;
b->frame_id = frame_id;
check_duplicates (b);
|| (b->type == bp_read_watchpoint)
|| (b->type == bp_access_watchpoint)
|| ep_is_exception_catchpoint (b))
- && (b->enable_state == bp_enabled))
+ && breakpoint_enabled (b))
{
b->enable_state = bp_call_disabled;
check_duplicates (b);
set_momentary_breakpoint (struct symtab_and_line sal, struct frame_id frame_id,
enum bptype type)
{
- register struct breakpoint *b;
+ struct breakpoint *b;
b = set_raw_breakpoint (sal, type);
b->enable_state = bp_enabled;
b->disposition = disp_donttouch;
mention (struct breakpoint *b)
{
int say_where = 0;
- struct cleanup *old_chain;
+ struct cleanup *old_chain, *ui_out_chain;
struct ui_stream *stb;
stb = ui_out_stream_new (uiout);
old_chain = make_cleanup_ui_out_stream_delete (stb);
- /* FIXME: This is misplaced; mention() is called by things (like hitting a
- watchpoint) other than breakpoint creation. It should be possible to
- clean this up and at the same time replace the random calls to
- breakpoint_changed with this hook, as has already been done for
- delete_breakpoint_hook and so on. */
- if (create_breakpoint_hook)
- create_breakpoint_hook (b);
- breakpoint_create_event (b->number);
+ /* FIXME: This is misplaced; mention() is called by things (like
+ hitting a watchpoint) other than breakpoint creation. It should
+ be possible to clean this up and at the same time replace the
+ random calls to breakpoint_changed with this hook, as has already
+ been done for deprecated_delete_breakpoint_hook and so on. */
+ if (deprecated_create_breakpoint_hook)
+ deprecated_create_breakpoint_hook (b);
+ breakpoint_create_event (b->number);
+
+ if (b->ops != NULL && b->ops->print_mention != NULL)
+ b->ops->print_mention (b);
+ else
+ switch (b->type)
+ {
+ case bp_none:
+ printf_filtered ("(apparently deleted?) Eventpoint %d: ", b->number);
+ break;
+ case bp_watchpoint:
+ ui_out_text (uiout, "Watchpoint ");
+ ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "wpt");
+ ui_out_field_int (uiout, "number", b->number);
+ ui_out_text (uiout, ": ");
+ print_expression (b->exp, stb->stream);
+ ui_out_field_stream (uiout, "exp", stb);
+ do_cleanups (ui_out_chain);
+ break;
+ case bp_hardware_watchpoint:
+ ui_out_text (uiout, "Hardware watchpoint ");
+ ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "wpt");
+ ui_out_field_int (uiout, "number", b->number);
+ ui_out_text (uiout, ": ");
+ print_expression (b->exp, stb->stream);
+ ui_out_field_stream (uiout, "exp", stb);
+ do_cleanups (ui_out_chain);
+ break;
+ case bp_read_watchpoint:
+ ui_out_text (uiout, "Hardware read watchpoint ");
+ ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "hw-rwpt");
+ ui_out_field_int (uiout, "number", b->number);
+ ui_out_text (uiout, ": ");
+ print_expression (b->exp, stb->stream);
+ ui_out_field_stream (uiout, "exp", stb);
+ do_cleanups (ui_out_chain);
+ break;
+ case bp_access_watchpoint:
+ ui_out_text (uiout, "Hardware access (read/write) watchpoint ");
+ ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "hw-awpt");
+ ui_out_field_int (uiout, "number", b->number);
+ ui_out_text (uiout, ": ");
+ print_expression (b->exp, stb->stream);
+ ui_out_field_stream (uiout, "exp", stb);
+ do_cleanups (ui_out_chain);
+ break;
+ case bp_breakpoint:
+ if (ui_out_is_mi_like_p (uiout))
+ {
+ say_where = 0;
+ break;
+ }
+ printf_filtered ("Breakpoint %d", b->number);
+ say_where = 1;
+ break;
+ case bp_hardware_breakpoint:
+ if (ui_out_is_mi_like_p (uiout))
+ {
+ say_where = 0;
+ break;
+ }
+ printf_filtered ("Hardware assisted breakpoint %d", b->number);
+ say_where = 1;
+ break;
+ case bp_catch_load:
+ case bp_catch_unload:
+ printf_filtered ("Catchpoint %d (%s %s)",
+ b->number,
+ (b->type == bp_catch_load) ? "load" : "unload",
+ (b->dll_pathname != NULL) ?
+ b->dll_pathname : "<any library>");
+ break;
+ case bp_catch_fork:
+ case bp_catch_vfork:
+ printf_filtered ("Catchpoint %d (%s)",
+ b->number,
+ (b->type == bp_catch_fork) ? "fork" : "vfork");
+ break;
+ case bp_catch_exec:
+ printf_filtered ("Catchpoint %d (exec)",
+ b->number);
+ break;
+ case bp_catch_catch:
+ case bp_catch_throw:
+ printf_filtered ("Catchpoint %d (%s)",
+ b->number,
+ (b->type == bp_catch_catch) ? "catch" : "throw");
+ break;
+
+ case bp_until:
+ case bp_finish:
+ case bp_longjmp:
+ case bp_longjmp_resume:
+ case bp_step_resume:
+ case bp_through_sigtramp:
+ case bp_call_dummy:
+ case bp_watchpoint_scope:
+ case bp_shlib_event:
+ case bp_thread_event:
+ case bp_overlay_event:
+ break;
+ }
- switch (b->type)
+ if (say_where)
{
- case bp_none:
- printf_filtered ("(apparently deleted?) Eventpoint %d: ", b->number);
- break;
- case bp_watchpoint:
- ui_out_text (uiout, "Watchpoint ");
- ui_out_tuple_begin (uiout, "wpt");
- ui_out_field_int (uiout, "number", b->number);
- ui_out_text (uiout, ": ");
- print_expression (b->exp, stb->stream);
- ui_out_field_stream (uiout, "exp", stb);
- ui_out_tuple_end (uiout);
- break;
- case bp_hardware_watchpoint:
- ui_out_text (uiout, "Hardware watchpoint ");
- ui_out_tuple_begin (uiout, "wpt");
- ui_out_field_int (uiout, "number", b->number);
- ui_out_text (uiout, ": ");
- print_expression (b->exp, stb->stream);
- ui_out_field_stream (uiout, "exp", stb);
- ui_out_tuple_end (uiout);
- break;
- case bp_read_watchpoint:
- ui_out_text (uiout, "Hardware read watchpoint ");
- ui_out_tuple_begin (uiout, "hw-rwpt");
- ui_out_field_int (uiout, "number", b->number);
- ui_out_text (uiout, ": ");
- print_expression (b->exp, stb->stream);
- ui_out_field_stream (uiout, "exp", stb);
- ui_out_tuple_end (uiout);
- break;
- case bp_access_watchpoint:
- ui_out_text (uiout, "Hardware access (read/write) watchpoint ");
- ui_out_tuple_begin (uiout, "hw-awpt");
- ui_out_field_int (uiout, "number", b->number);
- ui_out_text (uiout, ": ");
- print_expression (b->exp, stb->stream);
- ui_out_field_stream (uiout, "exp", stb);
- ui_out_tuple_end (uiout);
- break;
- case bp_breakpoint:
- if (ui_out_is_mi_like_p (uiout))
+ if (b->pending)
{
- say_where = 0;
- break;
- }
- printf_filtered ("Breakpoint %d", b->number);
- say_where = 1;
- break;
- case bp_hardware_breakpoint:
- if (ui_out_is_mi_like_p (uiout))
- {
- say_where = 0;
- break;
+ printf_filtered (" (%s) pending.", b->addr_string);
}
- printf_filtered ("Hardware assisted breakpoint %d", b->number);
- say_where = 1;
- break;
- case bp_catch_load:
- case bp_catch_unload:
- printf_filtered ("Catchpoint %d (%s %s)",
- b->number,
- (b->type == bp_catch_load) ? "load" : "unload",
- (b->dll_pathname != NULL) ?
- b->dll_pathname : "<any library>");
- break;
- case bp_catch_fork:
- case bp_catch_vfork:
- printf_filtered ("Catchpoint %d (%s)",
- b->number,
- (b->type == bp_catch_fork) ? "fork" : "vfork");
- break;
- case bp_catch_exec:
- printf_filtered ("Catchpoint %d (exec)",
- b->number);
- break;
- case bp_catch_catch:
- case bp_catch_throw:
- printf_filtered ("Catchpoint %d (%s)",
- b->number,
- (b->type == bp_catch_catch) ? "catch" : "throw");
- break;
-
- case bp_until:
- case bp_finish:
- case bp_longjmp:
- case bp_longjmp_resume:
- case bp_step_resume:
- case bp_through_sigtramp:
- case bp_call_dummy:
- case bp_watchpoint_scope:
- case bp_shlib_event:
- case bp_thread_event:
- case bp_overlay_event:
- break;
- }
- if (say_where)
- {
- if (addressprint || b->source_file == NULL)
+ else
{
- printf_filtered (" at ");
- print_address_numeric (b->address, 1, gdb_stdout);
+ if (addressprint || b->source_file == NULL)
+ {
+ printf_filtered (" at ");
+ print_address_numeric (b->loc->address, 1, gdb_stdout);
+ }
+ if (b->source_file)
+ printf_filtered (": file %s, line %d.",
+ b->source_file, b->line_number);
}
- if (b->source_file)
- printf_filtered (": file %s, line %d.",
- b->source_file, b->line_number);
}
do_cleanups (old_chain);
if (ui_out_is_mi_like_p (uiout))
SALS.sal[i] breakpoint, include the corresponding ADDR_STRING[i],
COND[i] and COND_STRING[i] values.
+ The parameter PENDING_BP points to a pending breakpoint that is
+ the basis of the breakpoints currently being created. The pending
+ breakpoint may contain a separate condition string or commands
+ that were added after the initial pending breakpoint was created.
+
NOTE: If the function succeeds, the caller is expected to cleanup
the arrays ADDR_STRING, COND_STRING, COND and SALS (but not the
array contents). If the function fails (error() is called), the
create_breakpoints (struct symtabs_and_lines sals, char **addr_string,
struct expression **cond, char **cond_string,
enum bptype type, enum bpdisp disposition,
- int thread, int ignore_count, int from_tty)
+ int thread, int ignore_count, int from_tty,
+ struct breakpoint *pending_bp)
{
if (type == bp_hardware_breakpoint)
{
else
/* addr_string has to be used or breakpoint_re_set will delete
me. */
- xasprintf (&b->addr_string, "*0x%s", paddr (b->address));
+ xasprintf (&b->addr_string, "*0x%s", paddr (b->loc->address));
b->cond_string = cond_string[i];
b->ignore_count = ignore_count;
b->enable_state = bp_enabled;
b->disposition = disposition;
+ /* If resolving a pending breakpoint, a check must be made to see if
+ the user has specified a new condition or commands for the
+ breakpoint. A new condition will override any condition that was
+ initially specified with the initial breakpoint command. */
+ if (pending_bp)
+ {
+ char *arg;
+ if (pending_bp->cond_string)
+ {
+ arg = pending_bp->cond_string;
+ b->cond_string = savestring (arg, strlen (arg));
+ b->cond = parse_exp_1 (&arg, block_for_pc (b->loc->address), 0);
+ if (*arg)
+ error ("Junk at end of pending breakpoint condition expression");
+ }
+ /* If there are commands associated with the breakpoint, they should
+ be copied too. */
+ if (pending_bp->commands)
+ b->commands = copy_command_lines (pending_bp->commands);
+
+ /* We have to copy over the ignore_count and thread as well. */
+ b->ignore_count = pending_bp->ignore_count;
+ b->thread = pending_bp->thread;
+ }
mention (b);
}
}
addresses found. ADDR_STRING contains a vector of (canonical)
address strings. ARG points to the end of the SAL. */
-void
+static void
parse_breakpoint_sals (char **address,
struct symtabs_and_lines *sals,
- char ***addr_string)
+ char ***addr_string,
+ int *not_found_ptr)
{
char *addr_start = *address;
*addr_string = NULL;
|| ((strchr ("+-", (*address)[0]) != NULL)
&& ((*address)[1] != '['))))
*sals = decode_line_1 (address, 1, default_breakpoint_symtab,
- default_breakpoint_line, addr_string);
+ default_breakpoint_line, addr_string,
+ not_found_ptr);
else
- *sals = decode_line_1 (address, 1, (struct symtab *) NULL, 0, addr_string);
+ *sals = decode_line_1 (address, 1, (struct symtab *) NULL, 0,
+ addr_string, not_found_ptr);
}
/* For any SAL that didn't have a canonical string, fill one in. */
if (sals->nelts > 0 && *addr_string == NULL)
/* Convert each SAL into a real PC. Verify that the PC can be
inserted as a breakpoint. If it can't throw an error. */
-void
+static void
breakpoint_sals_to_pc (struct symtabs_and_lines *sals,
char *address)
{
Give the target a chance to bless sals.sals[i].pc before we
try to make a breakpoint for it. */
- if (PC_REQUIRES_RUN_BEFORE_USE (sals->sals[i].pc))
+#ifdef DEPRECATED_PC_REQUIRES_RUN_BEFORE_USE
+ if (DEPRECATED_PC_REQUIRES_RUN_BEFORE_USE (sals->sals[i].pc))
{
if (address == NULL)
error ("Cannot break without a running program.");
error ("Cannot break on %s without a running program.",
address);
}
+#endif
}
}
+static int
+do_captured_parse_breakpoint (struct ui_out *ui, void *data)
+{
+ struct captured_parse_breakpoint_args *args = data;
+
+ parse_breakpoint_sals (args->arg_p, args->sals_p, args->addr_string_p,
+ args->not_found_ptr);
+
+ return GDB_RC_OK;
+}
+
/* Set a breakpoint according to ARG (function, linenum or *address)
flag: first bit : 0 non-temporary, 1 temporary.
- second bit : 0 normal breakpoint, 1 hardware breakpoint. */
+ second bit : 0 normal breakpoint, 1 hardware breakpoint.
-static void
-break_command_1 (char *arg, int flag, int from_tty)
+ PENDING_BP is non-NULL when this function is being called to resolve
+ a pending breakpoint. */
+
+static int
+break_command_1 (char *arg, int flag, int from_tty, struct breakpoint *pending_bp)
{
int tempflag, hardwareflag;
struct symtabs_and_lines sals;
- register struct expression **cond = 0;
- /* Pointers in arg to the start, and one past the end, of the
- condition. */
+ struct expression **cond = 0;
+ struct symtab_and_line pending_sal;
char **cond_string = (char **) NULL;
+ char *copy_arg;
+ char *err_msg;
char *addr_start = arg;
char **addr_string;
struct cleanup *old_chain;
struct cleanup *breakpoint_chain = NULL;
- int i;
+ struct captured_parse_breakpoint_args parse_args;
+ int i, rc;
+ int pending = 0;
int thread = -1;
int ignore_count = 0;
+ int not_found = 0;
hardwareflag = flag & BP_HARDWAREFLAG;
tempflag = flag & BP_TEMPFLAG;
sals.sals = NULL;
sals.nelts = 0;
addr_string = NULL;
- parse_breakpoint_sals (&arg, &sals, &addr_string);
- if (!sals.nelts)
- return;
+ parse_args.arg_p = &arg;
+ parse_args.sals_p = &sals;
+ parse_args.addr_string_p = &addr_string;
+ parse_args.not_found_ptr = ¬_found;
+
+ rc = catch_exceptions_with_msg (uiout, do_captured_parse_breakpoint,
+ &parse_args, NULL, &err_msg,
+ RETURN_MASK_ALL);
+
+ /* If caller is interested in rc value from parse, set value. */
+
+ if (rc != GDB_RC_OK)
+ {
+ /* Check for file or function not found. */
+ if (not_found)
+ {
+ /* If called to resolve pending breakpoint, just return error code. */
+ if (pending_bp)
+ return rc;
+
+ error_output_message (NULL, err_msg);
+ xfree (err_msg);
+
+ /* If pending breakpoint support is turned off, throw error. */
+
+ if (pending_break_support == AUTO_BOOLEAN_FALSE)
+ throw_exception (RETURN_ERROR);
+
+ /* If pending breakpoint support is auto query and the user selects
+ no, then simply return the error code. */
+ if (pending_break_support == AUTO_BOOLEAN_AUTO &&
+ !nquery ("Make breakpoint pending on future shared library load? "))
+ return rc;
+
+ /* At this point, either the user was queried about setting a
+ pending breakpoint and selected yes, or pending breakpoint
+ behavior is on and thus a pending breakpoint is defaulted
+ on behalf of the user. */
+ copy_arg = xstrdup (addr_start);
+ addr_string = ©_arg;
+ sals.nelts = 1;
+ sals.sals = &pending_sal;
+ pending_sal.pc = 0;
+ pending = 1;
+ }
+ else
+ return rc;
+ }
+ else if (!sals.nelts)
+ return GDB_RC_FAIL;
/* Create a chain of things that always need to be cleaned up. */
old_chain = make_cleanup (null_cleanup, 0);
- /* Make sure that all storage allocated to SALS gets freed. */
- make_cleanup (xfree, sals.sals);
-
- /* Cleanup the addr_string array but not its contents. */
- make_cleanup (xfree, addr_string);
+ if (!pending)
+ {
+ /* Make sure that all storage allocated to SALS gets freed. */
+ make_cleanup (xfree, sals.sals);
+
+ /* Cleanup the addr_string array but not its contents. */
+ make_cleanup (xfree, addr_string);
+ }
/* Allocate space for all the cond expressions. */
cond = xcalloc (sals.nelts, sizeof (struct expression *));
/* Resolve all line numbers to PC's and verify that the addresses
are ok for the target. */
- breakpoint_sals_to_pc (&sals, addr_start);
+ if (!pending)
+ breakpoint_sals_to_pc (&sals, addr_start);
/* Verify that condition can be parsed, before setting any
breakpoints. Allocate a separate condition expression for each
breakpoint. */
thread = -1; /* No specific thread yet */
- for (i = 0; i < sals.nelts; i++)
+ if (!pending)
{
- char *tok = arg;
- while (tok && *tok)
+ for (i = 0; i < sals.nelts; i++)
{
- char *end_tok;
- int toklen;
- char *cond_start = NULL;
- char *cond_end = NULL;
- while (*tok == ' ' || *tok == '\t')
- tok++;
-
- end_tok = tok;
-
- while (*end_tok != ' ' && *end_tok != '\t' && *end_tok != '\000')
- end_tok++;
-
- toklen = end_tok - tok;
-
- if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
- {
- tok = cond_start = end_tok + 1;
- cond[i] = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc), 0);
- make_cleanup (xfree, cond[i]);
- cond_end = tok;
- cond_string[i] = savestring (cond_start, cond_end - cond_start);
- make_cleanup (xfree, cond_string[i]);
- }
- else if (toklen >= 1 && strncmp (tok, "thread", toklen) == 0)
+ char *tok = arg;
+ while (tok && *tok)
{
- char *tmptok;
-
- tok = end_tok + 1;
- tmptok = tok;
- thread = strtol (tok, &tok, 0);
- if (tok == tmptok)
- error ("Junk after thread keyword.");
- if (!valid_thread_id (thread))
- error ("Unknown thread %d\n", thread);
+ char *end_tok;
+ int toklen;
+ char *cond_start = NULL;
+ char *cond_end = NULL;
+ while (*tok == ' ' || *tok == '\t')
+ tok++;
+
+ end_tok = tok;
+
+ while (*end_tok != ' ' && *end_tok != '\t' && *end_tok != '\000')
+ end_tok++;
+
+ toklen = end_tok - tok;
+
+ if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
+ {
+ tok = cond_start = end_tok + 1;
+ cond[i] = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc),
+ 0);
+ make_cleanup (xfree, cond[i]);
+ cond_end = tok;
+ cond_string[i] = savestring (cond_start,
+ cond_end - cond_start);
+ make_cleanup (xfree, cond_string[i]);
+ }
+ else if (toklen >= 1 && strncmp (tok, "thread", toklen) == 0)
+ {
+ char *tmptok;
+
+ tok = end_tok + 1;
+ tmptok = tok;
+ thread = strtol (tok, &tok, 0);
+ if (tok == tmptok)
+ error ("Junk after thread keyword.");
+ if (!valid_thread_id (thread))
+ error ("Unknown thread %d\n", thread);
+ }
+ else
+ error ("Junk at end of arguments.");
}
- else
- error ("Junk at end of arguments.");
}
+ create_breakpoints (sals, addr_string, cond, cond_string,
+ hardwareflag ? bp_hardware_breakpoint
+ : bp_breakpoint,
+ tempflag ? disp_del : disp_donttouch,
+ thread, ignore_count, from_tty,
+ pending_bp);
}
+ else
+ {
+ struct symtab_and_line sal;
+ struct breakpoint *b;
- create_breakpoints (sals, addr_string, cond, cond_string,
- hardwareflag ? bp_hardware_breakpoint : bp_breakpoint,
- tempflag ? disp_del : disp_donttouch,
- thread, ignore_count, from_tty);
+ sal.symtab = NULL;
+ sal.pc = 0;
+ make_cleanup (xfree, copy_arg);
+
+ b = set_raw_breakpoint (sal, hardwareflag ? bp_hardware_breakpoint
+ : bp_breakpoint);
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
+ b->cond = *cond;
+ b->thread = thread;
+ b->addr_string = *addr_string;
+ b->cond_string = *cond_string;
+ b->ignore_count = ignore_count;
+ b->pending = 1;
+ b->disposition = tempflag ? disp_del : disp_donttouch;
+ b->from_tty = from_tty;
+ b->flag = flag;
+ mention (b);
+ }
+
if (sals.nelts > 1)
{
warning ("Multiple breakpoints were set.");
discard_cleanups (breakpoint_chain);
/* But cleanup everything else. */
do_cleanups (old_chain);
+
+ return GDB_RC_OK;
}
/* Set a breakpoint of TYPE/DISPOSITION according to ARG (function,
{
struct captured_breakpoint_args *args = data;
struct symtabs_and_lines sals;
- register struct expression **cond;
+ struct expression **cond;
struct cleanup *old_chain;
struct cleanup *breakpoint_chain = NULL;
int i;
sals.nelts = 0;
address_end = args->address;
addr_string = NULL;
- parse_breakpoint_sals (&address_end, &sals, &addr_string);
+ parse_breakpoint_sals (&address_end, &sals, &addr_string, 0);
if (!sals.nelts)
return GDB_RC_NONE;
create_breakpoints (sals, addr_string, cond, cond_string,
args->hardwareflag ? bp_hardware_breakpoint : bp_breakpoint,
args->tempflag ? disp_del : disp_donttouch,
- args->thread, args->ignore_count, 0/*from-tty*/);
+ args->thread, args->ignore_count, 0/*from-tty*/,
+ NULL/*pending_bp*/);
/* That's it. Discard the cleanups for data inserted into the
breakpoint. */
CORE_ADDR low, high, selected_pc = 0;
char *extra_args = NULL;
char *level_arg;
- char *addr_string;
int extra_args_len = 0, if_arg = 0;
if (!arg ||
{
if (find_pc_partial_function (selected_pc, (char **) NULL, &low, &high))
{
- addr_string = (char *) xmalloc (26 + extra_args_len);
+ char *addr_string;
if (extra_args_len)
- sprintf (addr_string, "*0x%s %s", paddr_nz (high), extra_args);
+ addr_string = xstrprintf ("*0x%s %s", paddr_nz (high), extra_args);
else
- sprintf (addr_string, "*0x%s", paddr_nz (high));
- break_command_1 (addr_string, flag, from_tty);
+ addr_string = xstrprintf ("*0x%s", paddr_nz (high));
+ break_command_1 (addr_string, flag, from_tty, NULL);
xfree (addr_string);
}
else
{
if (deprecated_selected_frame)
{
- addr_string = (char *) xmalloc (15);
- sprintf (addr_string, "*0x%s",
- paddr_nz (get_frame_pc (deprecated_selected_frame)));
+ addr_string = xstrprintf ("*0x%s",
+ paddr_nz (get_frame_pc (deprecated_selected_frame)));
if (arg)
if_arg = 1;
}
beg_addr_string = addr_string;
sals = decode_line_1 (&addr_string, 1, (struct symtab *) NULL, 0,
- (char ***) NULL);
+ (char ***) NULL, NULL);
xfree (beg_addr_string);
old_chain = make_cleanup (xfree, sals.sals);
sal = sals.sals[i];
if (find_pc_partial_function (sal.pc, (char **) NULL, &low, &high))
{
- break_string = (char *) xmalloc (extra_args_len + 26);
+ break_string;
if (extra_args_len)
- sprintf (break_string, "*0x%s %s", paddr_nz (high), extra_args);
+ break_string = xstrprintf ("*0x%s %s", paddr_nz (high),
+ extra_args);
else
- sprintf (break_string, "*0x%s", paddr_nz (high));
- break_command_1 (break_string, flag, from_tty);
+ break_string = xstrprintf ("*0x%s", paddr_nz (high));
+ break_command_1 (break_string, flag, from_tty, NULL);
xfree (break_string);
}
else
void
break_command (char *arg, int from_tty)
{
- break_command_1 (arg, 0, from_tty);
+ break_command_1 (arg, 0, from_tty, NULL);
}
void
void
tbreak_command (char *arg, int from_tty)
{
- break_command_1 (arg, BP_TEMPFLAG, from_tty);
+ break_command_1 (arg, BP_TEMPFLAG, from_tty, NULL);
}
void
static void
hbreak_command (char *arg, int from_tty)
{
- break_command_1 (arg, BP_HARDWAREFLAG, from_tty);
+ break_command_1 (arg, BP_HARDWAREFLAG, from_tty, NULL);
}
static void
thbreak_command (char *arg, int from_tty)
{
- break_command_1 (arg, (BP_TEMPFLAG | BP_HARDWAREFLAG), from_tty);
+ break_command_1 (arg, (BP_TEMPFLAG | BP_HARDWAREFLAG), from_tty, NULL);
}
static void
if (badInput)
printf_filtered ("Usage: stop in <function | address>\n");
else
- break_command_1 (arg, 0, from_tty);
+ break_command_1 (arg, 0, from_tty, NULL);
}
static void
if (badInput)
printf_filtered ("Usage: stop at <line>\n");
else
- break_command_1 (arg, 0, from_tty);
+ break_command_1 (arg, 0, from_tty, NULL);
}
-/* ARGSUSED */
/* accessflag: hw_write: watch write,
hw_read: watch read,
hw_access: watch access (read or write) */
scope_breakpoint->frame_id = get_frame_id (prev_frame);
/* Set the address at which we will stop. */
- scope_breakpoint->address = get_frame_pc (prev_frame);
+ scope_breakpoint->loc->requested_address
+ = get_frame_pc (prev_frame);
+ scope_breakpoint->loc->address
+ = adjust_breakpoint_address (scope_breakpoint->loc->requested_address,
+ scope_breakpoint->type);
/* The scope breakpoint is related to the watchpoint. We
will need to act on them together. */
in hardware. If the watchpoint can not be handled
in hardware return zero. */
-#if !defined(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
-#define TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(BYTE_SIZE) \
- ((BYTE_SIZE) <= (REGISTER_SIZE))
-#endif
-
#if !defined(TARGET_REGION_OK_FOR_HW_WATCHPOINT)
#define TARGET_REGION_OK_FOR_HW_WATCHPOINT(ADDR,LEN) \
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(LEN))
do_exec_cleanups (cleanups);
}
-/* ARGSUSED */
void
until_break_command (char *arg, int from_tty, int anywhere)
{
if (default_breakpoint_valid)
sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
- default_breakpoint_line, (char ***) NULL);
+ default_breakpoint_line, (char ***) NULL, NULL);
else
sals = decode_line_1 (&arg, 1, (struct symtab *) NULL,
- 0, (char ***) NULL);
+ 0, (char ***) NULL, NULL);
if (sals.nelts != 1)
error ("Couldn't get information on specified line.");
else
old_chain = make_exec_cleanup_delete_breakpoint (breakpoint);
- /* If we are running asynchronously, and the target supports async
- execution, we are not waiting for the target to stop, in the call
- tp proceed, below. This means that we cannot delete the
- brekpoints until the target has actually stopped. The only place
- where we get a chance to do that is in fetch_inferior_event, so
- we must set things up for that. */
-
- if (event_loop_p && target_can_async_p ())
- {
- /* In this case the arg for the continuation is just the point
- in the exec_cleanups chain from where to start doing
- cleanups, because all the continuation does is the cleanups in
- the exec_cleanup_chain. */
- arg1 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg1->next = NULL;
- arg1->data.pointer = old_chain;
-
- add_continuation (until_break_command_continuation, arg1);
- }
-
- /* Keep within the current frame, or in frames called by the current
- one. */
- if (prev_frame)
- {
- sal = find_pc_line (get_frame_pc (prev_frame), 0);
- sal.pc = get_frame_pc (prev_frame);
- breakpoint = set_momentary_breakpoint (sal, get_frame_id (prev_frame),
- bp_until);
- if (!event_loop_p || !target_can_async_p ())
- make_cleanup_delete_breakpoint (breakpoint);
- else
- make_exec_cleanup_delete_breakpoint (breakpoint);
- }
-
- proceed (-1, TARGET_SIGNAL_DEFAULT, 0);
- /* Do the cleanups now, anly if we are not running asynchronously,
- of if we are, but the target is still synchronous. */
- if (!event_loop_p || !target_can_async_p ())
- do_cleanups (old_chain);
-}
-
-#if 0
-/* These aren't used; I don't konw what they were for. */
-/* Set a breakpoint at the catch clause for NAME. */
-static int
-catch_breakpoint (char *name)
-{
-}
-
-static int
-disable_catch_breakpoint (void)
-{
-}
-
-static int
-delete_catch_breakpoint (void)
-{
-}
-
-static int
-enable_catch_breakpoint (void)
-{
-}
-#endif /* 0 */
-
-struct sal_chain
-{
- struct sal_chain *next;
- struct symtab_and_line sal;
-};
-
-#if 0
-/* Not really used -- invocation in handle_gnu_4_16_catch_command
- had been commented out in the v.4.16 sources, and stays
- disabled there now because "catch NAME" syntax isn't allowed.
- pai/1997-07-11 */
-/* This isn't used; I don't know what it was for. */
-/* For each catch clause identified in ARGS, run FUNCTION
- with that clause as an argument. */
-static struct symtabs_and_lines
-map_catch_names (char *args, int (*function) ())
-{
- register char *p = args;
- register char *p1;
- struct symtabs_and_lines sals;
-#if 0
- struct sal_chain *sal_chain = 0;
-#endif
-
- if (p == 0)
- error_no_arg ("one or more catch names");
-
- sals.nelts = 0;
- sals.sals = NULL;
-
- while (*p)
- {
- p1 = p;
- /* Don't swallow conditional part. */
- if (p1[0] == 'i' && p1[1] == 'f'
- && (p1[2] == ' ' || p1[2] == '\t'))
- break;
-
- if (isalpha (*p1))
- {
- p1++;
- while (isalnum (*p1) || *p1 == '_' || *p1 == '$')
- p1++;
- }
-
- if (*p1 && *p1 != ' ' && *p1 != '\t')
- error ("Arguments must be catch names.");
-
- *p1 = 0;
-#if 0
- if (function (p))
- {
- struct sal_chain *next = (struct sal_chain *)
- alloca (sizeof (struct sal_chain));
- next->next = sal_chain;
- next->sal = get_catch_sal (p);
- sal_chain = next;
- goto win;
- }
-#endif
- printf_unfiltered ("No catch clause for exception %s.\n", p);
-#if 0
- win:
-#endif
- p = p1;
- while (*p == ' ' || *p == '\t')
- p++;
- }
-}
-#endif
-
-/* This shares a lot of code with `print_frame_label_vars' from stack.c. */
-
-static struct symtabs_and_lines
-get_catch_sals (int this_level_only)
-{
- register struct blockvector *bl;
- register struct block *block;
- int index, have_default = 0;
- CORE_ADDR pc;
- struct symtabs_and_lines sals;
- struct sal_chain *sal_chain = 0;
- char *blocks_searched;
-
- /* Not sure whether an error message is always the correct response,
- but it's better than a core dump. */
- if (deprecated_selected_frame == NULL)
- error ("No selected frame.");
- block = get_frame_block (deprecated_selected_frame, 0);
- pc = get_frame_pc (deprecated_selected_frame);
-
- sals.nelts = 0;
- sals.sals = NULL;
-
- if (block == 0)
- error ("No symbol table info available.\n");
-
- bl = blockvector_for_pc (BLOCK_END (block) - 4, &index);
- blocks_searched = (char *) alloca (BLOCKVECTOR_NBLOCKS (bl) * sizeof (char));
- memset (blocks_searched, 0, BLOCKVECTOR_NBLOCKS (bl) * sizeof (char));
+ /* If we are running asynchronously, and the target supports async
+ execution, we are not waiting for the target to stop, in the call
+ tp proceed, below. This means that we cannot delete the
+ brekpoints until the target has actually stopped. The only place
+ where we get a chance to do that is in fetch_inferior_event, so
+ we must set things up for that. */
- while (block != 0)
+ if (event_loop_p && target_can_async_p ())
{
- CORE_ADDR end = BLOCK_END (block) - 4;
- int last_index;
-
- if (bl != blockvector_for_pc (end, &index))
- error ("blockvector blotch");
- if (BLOCKVECTOR_BLOCK (bl, index) != block)
- error ("blockvector botch");
- last_index = BLOCKVECTOR_NBLOCKS (bl);
- index += 1;
-
- /* Don't print out blocks that have gone by. */
- while (index < last_index
- && BLOCK_END (BLOCKVECTOR_BLOCK (bl, index)) < pc)
- index++;
-
- while (index < last_index
- && BLOCK_END (BLOCKVECTOR_BLOCK (bl, index)) < end)
- {
- if (blocks_searched[index] == 0)
- {
- struct block *b = BLOCKVECTOR_BLOCK (bl, index);
- register int i;
- register struct symbol *sym;
-
- ALL_BLOCK_SYMBOLS (b, i, sym)
- {
- if (STREQ (SYMBOL_NAME (sym), "default"))
- {
- if (have_default)
- continue;
- have_default = 1;
- }
- if (SYMBOL_CLASS (sym) == LOC_LABEL)
- {
- struct sal_chain *next = (struct sal_chain *)
- alloca (sizeof (struct sal_chain));
- next->next = sal_chain;
- next->sal = find_pc_line (SYMBOL_VALUE_ADDRESS (sym),
- 0);
- sal_chain = next;
- }
- }
- blocks_searched[index] = 1;
- }
- index++;
- }
- if (have_default)
- break;
- if (sal_chain && this_level_only)
- break;
+ /* In this case the arg for the continuation is just the point
+ in the exec_cleanups chain from where to start doing
+ cleanups, because all the continuation does is the cleanups in
+ the exec_cleanup_chain. */
+ arg1 =
+ (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
+ arg1->next = NULL;
+ arg1->data.pointer = old_chain;
- /* After handling the function's top-level block, stop.
- Don't continue to its superblock, the block of
- per-file symbols. */
- if (BLOCK_FUNCTION (block))
- break;
- block = BLOCK_SUPERBLOCK (block);
+ add_continuation (until_break_command_continuation, arg1);
}
- if (sal_chain)
+ /* Keep within the current frame, or in frames called by the current
+ one. */
+ if (prev_frame)
{
- struct sal_chain *tmp_chain;
-
- /* Count the number of entries. */
- for (index = 0, tmp_chain = sal_chain; tmp_chain;
- tmp_chain = tmp_chain->next)
- index++;
-
- sals.nelts = index;
- sals.sals = (struct symtab_and_line *)
- xmalloc (index * sizeof (struct symtab_and_line));
- for (index = 0; sal_chain; sal_chain = sal_chain->next, index++)
- sals.sals[index] = sal_chain->sal;
+ sal = find_pc_line (get_frame_pc (prev_frame), 0);
+ sal.pc = get_frame_pc (prev_frame);
+ breakpoint = set_momentary_breakpoint (sal, get_frame_id (prev_frame),
+ bp_until);
+ if (!event_loop_p || !target_can_async_p ())
+ make_cleanup_delete_breakpoint (breakpoint);
+ else
+ make_exec_cleanup_delete_breakpoint (breakpoint);
}
- return sals;
+ proceed (-1, TARGET_SIGNAL_DEFAULT, 0);
+ /* Do the cleanups now, anly if we are not running asynchronously,
+ of if we are, but the target is still synchronous. */
+ if (!event_loop_p || !target_can_async_p ())
+ do_cleanups (old_chain);
}
static void
}
catch_fork_kind;
-#if defined(CHILD_INSERT_FORK_CATCHPOINT) || defined(CHILD_INSERT_VFORK_CATCHPOINT)
-static void catch_fork_command_1 (catch_fork_kind fork_kind,
- char *arg, int tempflag, int from_tty);
-
static void
catch_fork_command_1 (catch_fork_kind fork_kind, char *arg, int tempflag,
int from_tty)
break;
}
}
-#endif
-#if defined(CHILD_INSERT_EXEC_CATCHPOINT)
static void
catch_exec_command_1 (char *arg, int tempflag, int from_tty)
{
and enable reporting of such events. */
create_exec_event_catchpoint (tempflag, cond_string);
}
-#endif
-#if defined(SOLIB_ADD)
static void
catch_load_command_1 (char *arg, int tempflag, int from_tty)
{
SOLIB_CREATE_CATCH_UNLOAD_HOOK (PIDGET (inferior_ptid), tempflag,
dll_pathname, cond_string);
}
-#endif /* SOLIB_ADD */
/* Commands to deal with catching exceptions. */
mention (b);
}
+static enum print_stop_action
+print_exception_catchpoint (struct breakpoint *b)
+{
+ annotate_catchpoint (b->number);
+
+ if (strstr (b->addr_string, "throw") != NULL)
+ printf_filtered ("\nCatchpoint %d (exception thrown)\n",
+ b->number);
+ else
+ printf_filtered ("\nCatchpoint %d (exception caught)\n",
+ b->number);
+
+ return PRINT_SRC_AND_LOC;
+}
+
+static void
+print_one_exception_catchpoint (struct breakpoint *b, CORE_ADDR *last_addr)
+{
+ if (addressprint)
+ {
+ annotate_field (4);
+ ui_out_field_core_addr (uiout, "addr", b->loc->address);
+ }
+ annotate_field (5);
+ *last_addr = b->loc->address;
+ if (strstr (b->addr_string, "throw") != NULL)
+ ui_out_field_string (uiout, "what", "exception throw");
+ else
+ ui_out_field_string (uiout, "what", "exception catch");
+}
+
+static void
+print_mention_exception_catchpoint (struct breakpoint *b)
+{
+ if (strstr (b->addr_string, "throw") != NULL)
+ printf_filtered ("Catchpoint %d (throw)", b->number);
+ else
+ printf_filtered ("Catchpoint %d (catch)", b->number);
+}
+
+static struct breakpoint_ops gnu_v3_exception_catchpoint_ops = {
+ print_exception_catchpoint,
+ print_one_exception_catchpoint,
+ print_mention_exception_catchpoint
+};
+
+static int
+handle_gnu_v3_exceptions (int tempflag, char *cond_string,
+ enum exception_event_kind ex_event, int from_tty)
+{
+ char *trigger_func_name, *nameptr;
+ struct symtabs_and_lines sals;
+ struct breakpoint *b;
+
+ if (ex_event == EX_EVENT_CATCH)
+ trigger_func_name = xstrdup ("__cxa_begin_catch");
+ else
+ trigger_func_name = xstrdup ("__cxa_throw");
+
+ nameptr = trigger_func_name;
+ sals = decode_line_1 (&nameptr, 1, NULL, 0, NULL, NULL);
+ if (sals.nelts == 0)
+ {
+ xfree (trigger_func_name);
+ return 0;
+ }
+
+ b = set_raw_breakpoint (sals.sals[0], bp_breakpoint);
+ set_breakpoint_count (breakpoint_count + 1);
+ b->number = breakpoint_count;
+ b->cond = NULL;
+ b->cond_string = (cond_string == NULL) ?
+ NULL : savestring (cond_string, strlen (cond_string));
+ b->thread = -1;
+ b->addr_string = trigger_func_name;
+ b->enable_state = bp_enabled;
+ b->disposition = tempflag ? disp_del : disp_donttouch;
+ b->ops = &gnu_v3_exception_catchpoint_ops;
+
+ xfree (sals.sals);
+ mention (b);
+ return 1;
+}
+
/* Deal with "catch catch" and "catch throw" commands */
static void
(ex_event != EX_EVENT_CATCH))
error ("Unsupported or unknown exception event; cannot catch it");
+ if (handle_gnu_v3_exceptions (tempflag, cond_string, ex_event, from_tty))
+ return;
+
/* See if we can find a callback routine */
sal = target_enable_exception_callback (ex_event, 1);
else
return; /* something went wrong with setting up callbacks */
}
- else
- {
- /* No callbacks from runtime system for exceptions.
- Try GNU C++ exception breakpoints using labels in debug info. */
- if (ex_event == EX_EVENT_CATCH)
- {
- handle_gnu_4_16_catch_command (arg, tempflag, from_tty);
- }
- else if (ex_event == EX_EVENT_THROW)
- {
- /* Set a breakpoint on __raise_exception () */
- warning ("Unsupported with this platform/compiler combination.");
- warning ("Perhaps you can achieve the effect you want by setting");
- warning ("a breakpoint on __raise_exception().");
- }
- }
+ warning ("Unsupported with this platform/compiler combination.");
}
/* Cover routine to allow wrapping target_enable_exception_catchpoints
return 1; /*is valid */
}
-
-
-/* This is the original v.4.16 and earlier version of the
- catch_command_1() function. Now that other flavours of "catch"
- have been introduced, and since exception handling can be handled
- in other ways (through target ops) also, this is used only for the
- GNU C++ exception handling system.
- Note: Only the "catch" flavour of GDB 4.16 is handled here. The
- "catch NAME" is now no longer allowed in catch_command_1(). Also,
- there was no code in GDB 4.16 for "catch throw".
-
- Called from catch_exception_command_1 () */
-
-
-static void
-handle_gnu_4_16_catch_command (char *arg, int tempflag, int from_tty)
-{
- /* First, translate ARG into something we can deal with in terms
- of breakpoints. */
-
- struct symtabs_and_lines sals;
- struct symtab_and_line sal;
- register struct expression *cond = 0;
- register struct breakpoint *b;
- char *save_arg;
- int i;
-
- init_sal (&sal); /* initialize to zeroes */
-
- /* If no arg given, or if first arg is 'if ', all active catch clauses
- are breakpointed. */
-
- if (!arg || (arg[0] == 'i' && arg[1] == 'f'
- && (arg[2] == ' ' || arg[2] == '\t')))
- {
- /* Grab all active catch clauses. */
- sals = get_catch_sals (0);
- }
- else
- {
- /* Grab selected catch clauses. */
- error ("catch NAME not implemented");
-
-#if 0
- /* Not sure why this code has been disabled. I'm leaving
- it disabled. We can never come here now anyway
- since we don't allow the "catch NAME" syntax.
- pai/1997-07-11 */
-
- /* This isn't used; I don't know what it was for. */
- sals = map_catch_names (arg, catch_breakpoint);
-#endif
- }
-
- if (!sals.nelts)
- return;
-
- save_arg = arg;
- for (i = 0; i < sals.nelts; i++)
- {
- resolve_sal_pc (&sals.sals[i]);
-
- while (arg && *arg)
- {
- if (arg[0] == 'i' && arg[1] == 'f'
- && (arg[2] == ' ' || arg[2] == '\t'))
- cond = parse_exp_1 ((arg += 2, &arg),
- block_for_pc (sals.sals[i].pc), 0);
- else
- error ("Junk at end of arguments.");
- }
- arg = save_arg;
- }
-
- for (i = 0; i < sals.nelts; i++)
- {
- sal = sals.sals[i];
-
- if (from_tty)
- describe_other_breakpoints (sal.pc, sal.section);
-
- /* Important -- this is an ordinary breakpoint. For platforms
- with callback support for exceptions,
- create_exception_catchpoint() will create special bp types
- (bp_catch_catch and bp_catch_throw), and there is code in
- insert_breakpoints() and elsewhere that depends on that. */
- b = set_raw_breakpoint (sal, bp_breakpoint);
- set_breakpoint_count (breakpoint_count + 1);
- b->number = breakpoint_count;
-
- b->cond = cond;
- b->enable_state = bp_enabled;
- b->disposition = tempflag ? disp_del : disp_donttouch;
-
- mention (b);
- }
-
- if (sals.nelts > 1)
- {
- warning ("Multiple breakpoints were set.");
- warning ("Use the \"delete\" command to delete unwanted breakpoints.");
- }
- xfree (sals.sals);
-}
-
static void
catch_command_1 (char *arg, int tempflag, int from_tty)
{
}
else if (strncmp (arg1_start, "fork", arg1_length) == 0)
{
-#if defined(CHILD_INSERT_FORK_CATCHPOINT)
catch_fork_command_1 (catch_fork, arg1_end + 1, tempflag, from_tty);
-#else
- error ("Catch of fork not yet implemented");
-#endif
}
else if (strncmp (arg1_start, "vfork", arg1_length) == 0)
{
-#if defined(CHILD_INSERT_VFORK_CATCHPOINT)
catch_fork_command_1 (catch_vfork, arg1_end + 1, tempflag, from_tty);
-#else
- error ("Catch of vfork not yet implemented");
-#endif
}
else if (strncmp (arg1_start, "exec", arg1_length) == 0)
{
-#if defined(CHILD_INSERT_EXEC_CATCHPOINT)
catch_exec_command_1 (arg1_end + 1, tempflag, from_tty);
-#else
- error ("Catch of exec not yet implemented");
-#endif
}
else if (strncmp (arg1_start, "load", arg1_length) == 0)
{
-#if defined(SOLIB_ADD)
catch_load_command_1 (arg1_end + 1, tempflag, from_tty);
-#else
- error ("Catch of load not implemented");
-#endif
}
else if (strncmp (arg1_start, "unload", arg1_length) == 0)
{
-#if defined(SOLIB_ADD)
catch_unload_command_1 (arg1_end + 1, tempflag, from_tty);
-#else
- error ("Catch of load not implemented");
-#endif
}
else if (strncmp (arg1_start, "stop", arg1_length) == 0)
{
return b;
}
-#if 0
-/* These aren't used; I don't know what they were for. */
-/* Disable breakpoints on all catch clauses described in ARGS. */
-static void
-disable_catch (char *args)
-{
- /* Map the disable command to catch clauses described in ARGS. */
-}
-
-/* Enable breakpoints on all catch clauses described in ARGS. */
-static void
-enable_catch (char *args)
-{
- /* Map the disable command to catch clauses described in ARGS. */
-}
-
-/* Delete breakpoints on all catch clauses in the active scope. */
-static void
-delete_catch (char *args)
-{
- /* Map the delete command to catch clauses described in ARGS. */
-}
-#endif /* 0 */
-
static void
catch_command (char *arg, int from_tty)
{
&& b->type != bp_read_watchpoint
&& b->type != bp_access_watchpoint
/* Not if b is a watchpoint of any sort... */
- && (((sal.pc && (b->address == sal.pc))
- && (!section_is_overlay (b->section)
- || b->section == sal.section))
+ && (((sal.pc && (b->loc->address == sal.pc))
+ && (!section_is_overlay (b->loc->section)
+ || b->loc->section == sal.section))
/* Yes, if sal.pc matches b (modulo overlays). */
|| ((default_match || (0 == sal.pc))
&& b->source_file != NULL
&& sal.symtab != NULL
- && STREQ (b->source_file, sal.symtab->filename)
+ && strcmp (b->source_file, sal.symtab->filename) == 0
&& b->line_number == sal.line)))
/* Yes, if sal source file and line matches b. */
{
void
delete_breakpoint (struct breakpoint *bpt)
{
- register struct breakpoint *b;
- register bpstat bs;
+ struct breakpoint *b;
+ bpstat bs;
+ struct bp_location *loc;
if (bpt == NULL)
error ("Internal error (attempted to delete a NULL breakpoint)");
if (bpt->type == bp_none)
return;
- if (delete_breakpoint_hook)
- delete_breakpoint_hook (bpt);
+ if (deprecated_delete_breakpoint_hook)
+ deprecated_delete_breakpoint_hook (bpt);
breakpoint_delete_event (bpt->number);
- if (bpt->inserted)
- remove_breakpoint (bpt, mark_inserted);
+ if (bpt->loc->inserted)
+ remove_breakpoint (bpt->loc, mark_inserted);
+
+ free_valchain (bpt->loc);
if (breakpoint_chain == bpt)
breakpoint_chain = bpt->next;
+ if (bp_location_chain == bpt->loc)
+ bp_location_chain = bpt->loc->next;
+
/* If we have callback-style exception catchpoints, don't go through
the adjustments to the C++ runtime library etc. if the inferior
isn't actually running. target_enable_exception_callback for a
exceptions are supported in this way, it's OK for now. FIXME */
if (ep_is_exception_catchpoint (bpt) && target_has_execution)
{
- static char message1[] = "Error in deleting catchpoint %d:\n";
- static char message[sizeof (message1) + 30];
- args_for_catchpoint_enable args;
-
/* Format possible error msg */
- sprintf (message, message1, bpt->number);
+ char *message = xstrprintf ("Error in deleting catchpoint %d:\n",
+ bpt->number);
+ struct cleanup *cleanups = make_cleanup (xfree, message);
+ args_for_catchpoint_enable args;
args.kind = bpt->type == bp_catch_catch ?
EX_EVENT_CATCH : EX_EVENT_THROW;
args.enable_p = 0;
catch_errors (cover_target_enable_exception_callback, &args,
message, RETURN_MASK_ALL);
+ do_cleanups (cleanups);
}
break;
}
+ ALL_BP_LOCATIONS (loc)
+ if (loc->next == bpt->loc)
+ {
+ loc->next = bpt->loc->next;
+ break;
+ }
+
check_duplicates (bpt);
/* If this breakpoint was inserted, and there is another breakpoint
at the same address, we need to insert the other breakpoint. */
- if (bpt->inserted
+ if (bpt->loc->inserted
&& bpt->type != bp_hardware_watchpoint
&& bpt->type != bp_read_watchpoint
&& bpt->type != bp_access_watchpoint
&& bpt->type != bp_catch_exec)
{
ALL_BREAKPOINTS (b)
- if (b->address == bpt->address
- && b->section == bpt->section
- && !b->duplicate
+ if (b->loc->address == bpt->loc->address
+ && b->loc->section == bpt->loc->section
+ && !b->loc->duplicate
&& b->enable_state != bp_disabled
&& b->enable_state != bp_shlib_disabled
+ && !b->pending
&& b->enable_state != bp_call_disabled)
{
int val;
"a permanent breakpoint");
if (b->type == bp_hardware_breakpoint)
- val = target_insert_hw_breakpoint (b->address, b->shadow_contents);
+ val = target_insert_hw_breakpoint (b->loc->address, b->loc->shadow_contents);
else
- val = target_insert_breakpoint (b->address, b->shadow_contents);
+ val = target_insert_breakpoint (b->loc->address, b->loc->shadow_contents);
/* If there was an error in the insert, print a message, then stop execution. */
if (val != 0)
{
fprintf_unfiltered (tmp_error_stream, "Cannot insert breakpoint %d.\n", b->number);
fprintf_filtered (tmp_error_stream, "Error accessing memory address ");
- print_address_numeric (b->address, 1, tmp_error_stream);
+ print_address_numeric (b->loc->address, 1, tmp_error_stream);
fprintf_filtered (tmp_error_stream, ": %s.\n",
safe_strerror (val));
}
error_stream(tmp_error_stream);
}
else
- b->inserted = 1;
+ b->loc->inserted = 1;
}
}
bp, we mark it as deleted before freeing its storage. */
bpt->type = bp_none;
+ xfree (bpt->loc);
xfree (bpt);
}
shlib_disabled breakpoint though. There's a fair chance we
can't re-set it if the shared library it's in hasn't been
loaded yet. */
+
+ if (b->pending)
+ break;
+
save_enable = b->enable_state;
if (b->enable_state != bp_shlib_disabled)
b->enable_state = bp_disabled;
set_language (b->language);
input_radix = b->input_radix;
s = b->addr_string;
- sals = decode_line_1 (&s, 1, (struct symtab *) NULL, 0, (char ***) NULL);
+ sals = decode_line_1 (&s, 1, (struct symtab *) NULL, 0, (char ***) NULL, NULL);
for (i = 0; i < sals.nelts; i++)
{
resolve_sal_pc (&sals.sals[i]);
{
s = b->cond_string;
if (b->cond)
- xfree (b->cond);
+ {
+ xfree (b->cond);
+ /* Avoid re-freeing b->exp if an error during the call
+ to parse_exp_1. */
+ b->cond = NULL;
+ }
b->cond = parse_exp_1 (&s, block_for_pc (sals.sals[i].pc), 0);
}
/* We need to re-set the breakpoint if the address changes... */
- if (b->address != sals.sals[i].pc
+ if (b->loc->address != sals.sals[i].pc
/* ...or new and old breakpoints both have source files, and
the source file name or the line number changes... */
|| (b->source_file != NULL
&& sals.sals[i].symtab != NULL
- && (!STREQ (b->source_file, sals.sals[i].symtab->filename)
+ && (strcmp (b->source_file, sals.sals[i].symtab->filename) != 0
|| b->line_number != sals.sals[i].line)
)
/* ...or we switch between having a source file and not having
savestring (sals.sals[i].symtab->filename,
strlen (sals.sals[i].symtab->filename));
b->line_number = sals.sals[i].line;
- b->address = sals.sals[i].pc;
+ b->loc->requested_address = sals.sals[i].pc;
+ b->loc->address
+ = adjust_breakpoint_address (b->loc->requested_address,
+ b->type);
/* Used to check for duplicates here, but that can
cause trouble, as it doesn't check for disabled
rather than once for every breakpoint. */
breakpoints_changed ();
}
- b->section = sals.sals[i].section;
+ b->loc->section = sals.sals[i].section;
b->enable_state = save_enable; /* Restore it, this worked. */
/* So for now, just use a global context. */
if (b->exp)
- xfree (b->exp);
+ {
+ xfree (b->exp);
+ /* Avoid re-freeing b->exp if an error during the call to
+ parse_expression. */
+ b->exp = NULL;
+ }
b->exp = parse_expression (b->exp_string);
b->exp_valid_block = innermost_block;
mark = value_mark ();
if (b->val)
- value_free (b->val);
+ {
+ value_free (b->val);
+ /* Avoid re-freeing b->val if an error during the call to
+ evaluate_expression. */
+ b->val = NULL;
+ }
b->val = evaluate_expression (b->exp);
release_value (b->val);
- if (VALUE_LAZY (b->val) && b->enable_state == bp_enabled)
+ if (VALUE_LAZY (b->val) && breakpoint_enabled (b))
value_fetch_lazy (b->val);
if (b->cond_string != NULL)
{
s = b->cond_string;
if (b->cond)
- xfree (b->cond);
+ {
+ xfree (b->cond);
+ /* Avoid re-freeing b->exp if an error during the call
+ to parse_exp_1. */
+ b->cond = NULL;
+ }
b->cond = parse_exp_1 (&s, (struct block *) 0, 0);
}
- if (b->enable_state == bp_enabled)
+ if (breakpoint_enabled (b))
mention (b);
value_free_to_mark (mark);
break;
struct breakpoint *b, *temp;
enum language save_language;
int save_input_radix;
- static char message1[] = "Error in re-setting breakpoint %d:\n";
- char message[sizeof (message1) + 30 /* slop */ ];
save_language = current_language->la_language;
save_input_radix = input_radix;
ALL_BREAKPOINTS_SAFE (b, temp)
{
/* Format possible error msg */
- sprintf (message, message1, b->number);
+ char *message = xstrprintf ("Error in re-setting breakpoint %d:\n",
+ b->number);
+ struct cleanup *cleanups = make_cleanup (xfree, message);
catch_errors (breakpoint_re_set_one, b, message, RETURN_MASK_ALL);
+ do_cleanups (cleanups);
}
set_language (save_language);
input_radix = save_input_radix;
void
set_ignore_count (int bptnum, int count, int from_tty)
{
- register struct breakpoint *b;
+ struct breakpoint *b;
if (count < 0)
count = 0;
ignore_command (char *args, int from_tty)
{
char *p = args;
- register int num;
+ int num;
if (p == 0)
error_no_arg ("a breakpoint number");
static void
map_breakpoint_numbers (char *args, void (*function) (struct breakpoint *))
{
- register char *p = args;
+ char *p = args;
char *p1;
- register int num;
- register struct breakpoint *b, *tmp;
+ int num;
+ struct breakpoint *b, *tmp;
int match;
if (p == 0)
check_duplicates (bpt);
- if (modify_breakpoint_hook)
- modify_breakpoint_hook (bpt);
+ if (deprecated_modify_breakpoint_hook)
+ deprecated_modify_breakpoint_hook (bpt);
breakpoint_modify_event (bpt->number);
}
-/* ARGSUSED */
static void
disable_command (char *args, int from_tty)
{
- register struct breakpoint *bpt;
+ struct breakpoint *bpt;
if (args == 0)
ALL_BREAKPOINTS (bpt)
switch (bpt->type)
static void
do_enable_breakpoint (struct breakpoint *bpt, enum bpdisp disposition)
{
- struct frame_info *save_selected_frame = NULL;
- int save_selected_frame_level = -1;
int target_resources_ok, other_type_used;
struct value *mark;
error ("Hardware breakpoints used exceeds limit.");
}
- if (bpt->enable_state != bp_permanent)
- bpt->enable_state = bp_enabled;
- bpt->disposition = disposition;
- check_duplicates (bpt);
- breakpoints_changed ();
-
- if (bpt->type == bp_watchpoint ||
- bpt->type == bp_hardware_watchpoint ||
- bpt->type == bp_read_watchpoint ||
- bpt->type == bp_access_watchpoint)
+ if (bpt->pending)
{
- if (bpt->exp_valid_block != NULL)
+ if (bpt->enable_state != bp_enabled)
{
- struct frame_info *fr =
- fr = frame_find_by_id (bpt->watchpoint_frame);
- if (fr == NULL)
+ /* When enabling a pending breakpoint, we need to check if the breakpoint
+ is resolvable since shared libraries could have been loaded
+ after the breakpoint was disabled. */
+ breakpoints_changed ();
+ if (resolve_pending_breakpoint (bpt) == GDB_RC_OK)
{
- printf_filtered ("\
-Cannot enable watchpoint %d because the block in which its expression\n\
-is valid is not currently in scope.\n", bpt->number);
- bpt->enable_state = bp_disabled;
+ delete_breakpoint (bpt);
return;
}
-
- save_selected_frame = deprecated_selected_frame;
- save_selected_frame_level = frame_relative_level (deprecated_selected_frame);
- select_frame (fr);
+ bpt->enable_state = bp_enabled;
+ bpt->disposition = disposition;
}
-
- value_free (bpt->val);
- mark = value_mark ();
- bpt->val = evaluate_expression (bpt->exp);
- release_value (bpt->val);
- if (VALUE_LAZY (bpt->val))
- value_fetch_lazy (bpt->val);
-
- if (bpt->type == bp_hardware_watchpoint ||
- bpt->type == bp_read_watchpoint ||
+ }
+ else /* Not a pending breakpoint. */
+ {
+ if (bpt->enable_state != bp_permanent)
+ bpt->enable_state = bp_enabled;
+ bpt->disposition = disposition;
+ check_duplicates (bpt);
+ breakpoints_changed ();
+
+ if (bpt->type == bp_watchpoint ||
+ bpt->type == bp_hardware_watchpoint ||
+ bpt->type == bp_read_watchpoint ||
bpt->type == bp_access_watchpoint)
{
- int i = hw_watchpoint_used_count (bpt->type, &other_type_used);
- int mem_cnt = can_use_hardware_watchpoint (bpt->val);
-
- /* Hack around 'unused var' error for some targets here */
- (void) mem_cnt, i;
- target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT (
- bpt->type, i + mem_cnt, other_type_used);
- /* we can consider of type is bp_hardware_watchpoint, convert to
- bp_watchpoint in the following condition */
- if (target_resources_ok < 0)
+ struct frame_id saved_frame_id;
+
+ saved_frame_id = get_frame_id (get_selected_frame ());
+ if (bpt->exp_valid_block != NULL)
+ {
+ struct frame_info *fr =
+ fr = frame_find_by_id (bpt->watchpoint_frame);
+ if (fr == NULL)
+ {
+ printf_filtered ("\
+Cannot enable watchpoint %d because the block in which its expression\n\
+is valid is not currently in scope.\n", bpt->number);
+ bpt->enable_state = bp_disabled;
+ return;
+ }
+ select_frame (fr);
+ }
+
+ value_free (bpt->val);
+ mark = value_mark ();
+ bpt->val = evaluate_expression (bpt->exp);
+ release_value (bpt->val);
+ if (VALUE_LAZY (bpt->val))
+ value_fetch_lazy (bpt->val);
+
+ if (bpt->type == bp_hardware_watchpoint ||
+ bpt->type == bp_read_watchpoint ||
+ bpt->type == bp_access_watchpoint)
{
- printf_filtered ("\
+ int i = hw_watchpoint_used_count (bpt->type, &other_type_used);
+ int mem_cnt = can_use_hardware_watchpoint (bpt->val);
+
+ /* Hack around 'unused var' error for some targets here */
+ (void) mem_cnt, i;
+ target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT (
+ bpt->type, i + mem_cnt, other_type_used);
+ /* we can consider of type is bp_hardware_watchpoint, convert to
+ bp_watchpoint in the following condition */
+ if (target_resources_ok < 0)
+ {
+ printf_filtered ("\
Cannot enable watchpoint %d because target watch resources\n\
have been allocated for other watchpoints.\n", bpt->number);
- bpt->enable_state = bp_disabled;
- value_free_to_mark (mark);
- return;
+ bpt->enable_state = bp_disabled;
+ value_free_to_mark (mark);
+ return;
+ }
}
+
+ select_frame (frame_find_by_id (saved_frame_id));
+ value_free_to_mark (mark);
}
-
- if (save_selected_frame_level >= 0)
- select_frame (save_selected_frame);
- value_free_to_mark (mark);
}
- if (modify_breakpoint_hook)
- modify_breakpoint_hook (bpt);
+
+ if (deprecated_modify_breakpoint_hook)
+ deprecated_modify_breakpoint_hook (bpt);
breakpoint_modify_event (bpt->number);
}
breakpoints) so they once again become (or continue to be) effective
in stopping the inferior. */
-/* ARGSUSED */
static void
enable_command (char *args, int from_tty)
{
- register struct breakpoint *bpt;
+ struct breakpoint *bpt;
if (args == 0)
ALL_BREAKPOINTS (bpt)
switch (bpt->type)
do_enable_breakpoint (bpt, disp_disable);
}
-/* ARGSUSED */
static void
enable_once_command (char *args, int from_tty)
{
do_enable_breakpoint (bpt, disp_del);
}
-/* ARGSUSED */
static void
enable_delete_command (char *args, int from_tty)
{
map_breakpoint_numbers (args, enable_delete_breakpoint);
}
\f
+static void
+set_breakpoint_cmd (char *args, int from_tty)
+{
+}
+
+static void
+show_breakpoint_cmd (char *args, int from_tty)
+{
+}
+
/* Use default_breakpoint_'s, or nothing if they aren't valid. */
struct symtabs_and_lines
sals = decode_line_1 (&string, funfirstline,
default_breakpoint_symtab,
default_breakpoint_line,
- (char ***) NULL);
+ (char ***) NULL, NULL);
else
sals = decode_line_1 (&string, funfirstline,
- (struct symtab *) NULL, 0, (char ***) NULL);
+ (struct symtab *) NULL, 0, (char ***) NULL, NULL);
if (*string)
error ("Junk at end of line specification: %s", string);
return sals;
void
_initialize_breakpoint (void)
{
+ static struct cmd_list_element *breakpoint_set_cmdlist;
+ static struct cmd_list_element *breakpoint_show_cmdlist;
struct cmd_list_element *c;
breakpoint_chain = 0;
add_show_from_set (c, &showlist);
can_use_hw_watchpoints = 1;
+
+ add_prefix_cmd ("breakpoint", class_maintenance, set_breakpoint_cmd, "\
+Breakpoint specific settings\n\
+Configure various breakpoint-specific variables such as\n\
+pending breakpoint behavior",
+ &breakpoint_set_cmdlist, "set breakpoint ",
+ 0/*allow-unknown*/, &setlist);
+ add_prefix_cmd ("breakpoint", class_maintenance, show_breakpoint_cmd, "\
+Breakpoint specific settings\n\
+Configure various breakpoint-specific variables such as\n\
+pending breakpoint behavior",
+ &breakpoint_show_cmdlist, "show breakpoint ",
+ 0/*allow-unknown*/, &showlist);
+
+ add_setshow_auto_boolean_cmd ("pending", no_class, &pending_break_support, "\
+Set debugger's behavior regarding pending breakpoints.\n\
+If on, an unrecognized breakpoint location will cause gdb to create a\n\
+pending breakpoint. If off, an unrecognized breakpoint location results in\n\
+an error. If auto, an unrecognized breakpoint location results in a\n\
+user-query to see if a pending breakpoint should be created.","\
+Show debugger's behavior regarding pending breakpoints.\n\
+If on, an unrecognized breakpoint location will cause gdb to create a\n\
+pending breakpoint. If off, an unrecognized breakpoint location results in\n\
+an error. If auto, an unrecognized breakpoint location results in a\n\
+user-query to see if a pending breakpoint should be created.",
+ NULL, NULL,
+ &breakpoint_set_cmdlist,
+ &breakpoint_show_cmdlist);
+
+ pending_break_support = AUTO_BOOLEAN_AUTO;
}