This file is part of GDB.
-GDB is free software; you can redistribute it and/or modify
+This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
-GDB is distributed in the hope that it will be useful,
+This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING. If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include <stdio.h>
#include <ctype.h>
error ("No breakpoint number %d.", bnum);
}
+/* ARGSUSED */
static void
commands_command (arg, from_tty)
char *arg;
ALL_BREAKPOINTS (b)
if (b->number == bnum)
{
- if (input_from_terminal_p ())
+ if (from_tty && input_from_terminal_p ())
{
printf ("Type commands for when breakpoint %d is hit, one per line.\n\
End with a line saying just \"end\".\n", bnum);
}
}
+/* Stub for cleaning up our state if we error-out of a breakpoint command */
+/* ARGSUSED */
+static void
+cleanup_executing_breakpoints (ignore)
+ int ignore;
+{
+ executing_breakpoint_commands = 0;
+}
+
/* Execute all the commands associated with all the breakpoints at this
location. Any of these commands could cause the process to proceed
beyond this point, etc. We look out for such changes by checking
bpstat *bsp;
{
bpstat bs;
+ struct cleanup *old_chain;
+
+ executing_breakpoint_commands = 1;
+ old_chain = make_cleanup (cleanup_executing_breakpoints, 0);
top:
bs = *bsp;
- executing_breakpoint_commands = 1;
breakpoint_proceeded = 0;
for (; bs != NULL; bs = bs->next)
{
clear_momentary_breakpoints ();
executing_breakpoint_commands = 0;
+ discard_cleanups (old_chain);
}
int
/* Evaluate the expression EXP and return 1 if value is zero.
This is used inside a catch_errors to evaluate the breakpoint condition.
- The argument is a "struct expression *" that has been cast to int to
+ The argument is a "struct expression *" that has been cast to char * to
make it pass through catch_errors. */
static int
breakpoint_cond_eval (exp)
- int exp;
+ char *exp;
{
return value_zerop (evaluate_expression ((struct expression *)exp));
}
int stop = 0;
int print = 0;
CORE_ADDR bp_addr;
+#if DECR_PC_AFTER_BREAK != 0 || defined (SHIFT_INST_REGS)
/* True if we've hit a breakpoint (as opposed to a watchpoint). */
int real_breakpoint = 0;
+#endif
/* Root of the chain of bpstat's */
struct bpstat__struct root_bs[1];
/* Pointer to the last thing in the chain currently. */
continue;
}
}
+#if DECR_PC_AFTER_BREAK != 0 || defined (SHIFT_INST_REGS)
else
real_breakpoint = 1;
+#endif
if (b->frame && b->frame != frame_address)
this_bp_stop = 0;
else
{
- int value_zero;
+ int value_is_zero;
if (b->cond)
{
/* Need to select the frame, with all that implies
so that the conditions will have the right context. */
select_frame (get_current_frame (), 0);
- value_zero
- = catch_errors (breakpoint_cond_eval, (int)(b->cond),
+ value_is_zero
+ = catch_errors (breakpoint_cond_eval, (char *)(b->cond),
"Error occurred in testing breakpoint condition.");
free_all_values ();
}
- if (b->cond && value_zero)
+ if (b->cond && value_is_zero)
{
this_bp_stop = 0;
}
printf_filtered (":%d", b->line_number);
}
else
- print_address_symbolic (b->address, stdout, demangle);
+ print_address_symbolic (b->address, stdout, demangle, " ");
}
printf_filtered ("\n");
set_next_address (last_addr);
}
+/* ARGSUSED */
static void
breakpoints_info (bnum_exp, from_tty)
char *bnum_exp;
breakpoint_1 (bnum, 0);
}
+/* ARGSUSED */
static void
watchpoints_info (bnum_exp, from_tty)
char *bnum_exp;
break_command_1 (arg, 1, from_tty);
}
+/* ARGSUSED */
static void
watch_command (arg, from_tty)
char *arg;
* Helper routine for the until_command routine in infcmd.c. Here
* because it uses the mechanisms of breakpoints.
*/
+/* ARGSUSED */
void
until_break_command (arg, from_tty)
char *arg;
proceed (-1, -1, 0);
}
\f
+#if 0
+/* These aren't used; I don't konw what they were for. */
/* Set a breakpoint at the catch clause for NAME. */
static int
catch_breakpoint (name)
enable_catch_breakpoint ()
{
}
+#endif /* 0 */
struct sal_chain
{
struct symtab_and_line sal;
};
+#if 0
+/* This isn't used; I don't know what it was for. */
/* For each catch clause identified in ARGS, run FUNCTION
with that clause as an argument. */
static struct symtabs_and_lines
register char *p = args;
register char *p1;
struct symtabs_and_lines sals;
+#if 0
struct sal_chain *sal_chain = 0;
+#endif
if (p == 0)
error_no_arg ("one or more catch names");
}
#endif
printf ("No catch clause for exception %s.\n", p);
+#if 0
win:
+#endif
p = p1;
while (*p == ' ' || *p == '\t') p++;
}
}
+#endif /* 0 */
/* This shares a lot of code with `print_frame_label_vars' from stack.c. */
{
/* Grab selected catch clauses. */
error ("catch NAME not implemeneted");
+#if 0
+ /* This isn't used; I don't know what it was for. */
sals = map_catch_names (arg, catch_breakpoint);
+#endif
}
if (! sals.nelts)
free (sals.sals);
}
+#if 0
+/* These aren't used; I don't know what they were for. */
/* Disable breakpoints on all catch clauses described in ARGS. */
static void
disable_catch (args)
{
/* Map the delete command to catch clauses described in ARGS. */
}
+#endif /* 0 */
static void
catch_command (arg, from_tty)
map_breakpoint_numbers (arg, delete_breakpoint);
}
-static void
+/* Reset a breakpoint given it's struct breakpoint * BINT.
+ The value we return ends up being the return value from catch_errors.
+ Unused in this case. */
+
+static int
breakpoint_re_set_one (bint)
- int bint;
+ char *bint;
{
struct breakpoint *b = (struct breakpoint *)bint; /* get past catch_errs */
int i;
/* Anything without a string can't be re-set. */
delete_breakpoint (b);
}
+ return 0;
}
/* Re-set all breakpoints after symbols have been re-loaded. */
ALL_BREAKPOINTS (b)
{
b->symtab = 0; /* Be sure we don't point to old dead symtab */
- (void) catch_errors (breakpoint_re_set_one, (int) b,
+ (void) catch_errors (breakpoint_re_set_one, (char *) b,
"Error in re-setting breakpoint");
}
if (*p == 0)
error ("Second argument (specified ignore-count) is missing.");
- set_ignore_count (num, parse_and_eval_address (p), from_tty);
+ set_ignore_count (num,
+ longest_to_int (value_as_long (parse_and_eval (p))),
+ from_tty);
printf ("\n");
}
\f
}
}
+/* ARGSUSED */
static void
enable_command (args, from_tty)
char *args;
check_duplicates (bpt->address);
}
+/* ARGSUSED */
static void
disable_command (args, from_tty)
char *args;
check_duplicates (bpt->address);
}
+/* ARGSUSED */
static void
enable_once_command (args, from_tty)
char *args;
check_duplicates (bpt->address);
}
+/* ARGSUSED */
static void
enable_delete_command (args, from_tty)
char *args;
projects / deliverable / binutils-gdb.git / blobdiff