#ifndef SOLIB_CREATE_CATCH_LOAD_HOOK
#define SOLIB_CREATE_CATCH_LOAD_HOOK(pid,tempflag,filename,cond_string) \
- error ("catch of library loads not yet implemented on this platform")
+ error (_("catch of library loads not yet implemented on this platform"))
#endif
/* This function is called by the "catch unload" command. It allows
#ifndef SOLIB_CREATE_CATCH_UNLOAD_HOOK
#define SOLIB_CREATE_CATCH_UNLOAD_HOOK(pid, tempflag, filename, cond_string) \
- error ("catch of library unloads not yet implemented on this platform")
+ error (_("catch of library unloads not yet implemented on this platform"))
#endif
/* Return whether a breakpoint is an active enabled breakpoint. */
end_value = get_number (temp);
if (end_value < last_retval)
{
- error ("inverted range");
+ error (_("inverted range"));
}
else if (end_value == last_retval)
{
}
}
else if (! in_range)
- error ("negative value");
+ error (_("negative value"));
else
{
/* pp points to the '-' that betokens a range. All
p = arg;
bnum = get_number (&p);
if (bnum == 0)
- error ("Bad breakpoint argument: '%s'", arg);
+ error (_("Bad breakpoint argument: '%s'"), arg);
ALL_BREAKPOINTS (b)
if (b->number == bnum)
{
b->cond = parse_exp_1 (&arg, block_for_pc (b->loc->address), 0);
if (*arg)
- error ("Junk at end of expression");
+ error (_("Junk at end of expression"));
}
}
breakpoints_changed ();
return;
}
- error ("No breakpoint number %d.", bnum);
+ error (_("No breakpoint number %d."), bnum);
}
static void
being read from. */
if (executing_breakpoint_commands)
- error ("Can't use the \"commands\" command among a breakpoint's commands.");
+ error (_("Can't use the \"commands\" command among a breakpoint's commands."));
p = arg;
bnum = get_number (&p);
if (p && *p)
- error ("Unexpected extra arguments following breakpoint number.");
+ error (_("Unexpected extra arguments following breakpoint number."));
ALL_BREAKPOINTS (b)
if (b->number == bnum)
breakpoint_modify_event (b->number);
return;
}
- error ("No breakpoint number %d.", bnum);
+ error (_("No breakpoint number %d."), bnum);
}
\f
/* Like target_read_memory() but if breakpoints are inserted, return
ALL_BP_LOCATIONS (b)
{
if (b->owner->type == bp_none)
- warning ("reading through apparently deleted breakpoint #%d?",
+ warning (_("reading through apparently deleted breakpoint #%d?"),
b->owner->number);
if (b->loc_type != bp_loc_software_breakpoint)
so we must try to set a breakpoint at the LMA.
This will not work for a hardware breakpoint. */
if (bpt->loc_type == bp_loc_hardware_breakpoint)
- warning ("hardware breakpoint %d not supported in overlay!\n",
+ warning (_("hardware breakpoint %d not supported in overlay!"),
bpt->owner->number);
else
{
struct cleanup *old_chain = save_inferior_ptid ();
if (pid == PIDGET (inferior_ptid))
- error ("Cannot detach breakpoints of inferior_ptid");
+ error (_("Cannot detach breakpoints of inferior_ptid"));
/* Set inferior_ptid; remove_breakpoint uses this global. */
inferior_ptid = pid_to_ptid (pid);
return 0;
if (b->owner->type == bp_none)
- warning ("attempted to remove apparently deleted breakpoint #%d?",
+ warning (_("attempted to remove apparently deleted breakpoint #%d?"),
b->owner->number);
if (b->loc_type == bp_loc_software_breakpoint
}
/* Failure to remove any of the hardware watchpoints comes here. */
if ((is == mark_uninserted) && (b->inserted))
- warning ("Could not remove hardware watchpoint %d.",
+ warning (_("Could not remove hardware watchpoint %d."),
b->owner->number);
}
else if ((b->owner->type == bp_catch_fork ||
val = target_remove_exec_catchpoint (PIDGET (inferior_ptid));
break;
default:
- warning ("Internal error, %s line %d.", __FILE__, __LINE__);
+ warning (_("Internal error, %s line %d."), __FILE__, __LINE__);
break;
}
if (val)
/* Don't issue the warning unless it's really needed... */
if (warning_needed && (context != inf_exited))
{
- warning ("Exception catchpoints from last run were deleted.");
- warning ("You must reinsert them explicitly.");
+ warning (_("Exception catchpoints from last run were deleted.\n"
+ "You must reinsert them explicitly."));
warning_needed = 0;
}
}
{
int current_thread;
- if (bsp == NULL)
- error ("Internal error (bpstat_find_step_resume_breakpoint)");
+ gdb_assert (bsp != NULL);
current_thread = pid_to_thread_id (inferior_ptid);
return bsp->breakpoint_at;
}
- error ("Internal error (no step_resume breakpoint found)");
+ internal_error (__FILE__, __LINE__, _("No step_resume breakpoint found."));
}
strcpy (astr1, hex_string_custom ((unsigned long) from_addr, 8));
strcpy (astr2, hex_string_custom ((unsigned long) to_addr, 8));
if (have_bnum)
- warning ("Breakpoint %d address previously adjusted from %s to %s.",
+ warning (_("Breakpoint %d address previously adjusted from %s to %s."),
bnum, astr1, astr2);
else
- warning ("Breakpoint address adjusted from %s to %s.", astr1, astr2);
+ warning (_("Breakpoint address adjusted from %s to %s."), astr1, astr2);
}
/* Adjust a breakpoint's address to account for architectural constraints
if (!disabled_shlib_breaks)
{
target_terminal_ours_for_output ();
- warning ("Temporarily disabling shared library breakpoints:");
+ warning (_("Temporarily disabling shared library breakpoints:"));
}
disabled_shlib_breaks = 1;
- warning ("breakpoint #%d ", b->number);
+ warning (_("breakpoint #%d "), b->number);
}
}
#endif
if (!disabled_shlib_breaks)
{
target_terminal_ours_for_output ();
- warning ("Temporarily disabling breakpoints for unloaded shared library \"%s\"",
+ warning (_("Temporarily disabling breakpoints for unloaded shared library \"%s\""),
so_name);
}
disabled_shlib_breaks = 1;
if (sals.nelts == 0)
{
- warning ("Unable to set a breakpoint on dynamic linker callback.");
- warning ("Suggest linking with /opt/langtools/lib/end.o.");
- warning ("GDB will be unable to track shl_load/shl_unload calls");
+ warning (_("Unable to set a breakpoint on dynamic linker callback.\n"
+ "Suggest linking with /opt/langtools/lib/end.o.\n"
+ "GDB will be unable to track shl_load/shl_unload calls."));
return;
}
if (sals.nelts != 1)
{
- warning ("Unable to set unique breakpoint on dynamic linker callback.");
- warning ("GDB will be unable to track shl_load/shl_unload calls");
+ warning (_("Unable to set unique breakpoint on dynamic linker callback.\n"
+ "GDB will be unable to track shl_load/shl_unload calls."));
return;
}
TARGET_CAN_USE_HARDWARE_WATCHPOINT (bp_hardware_breakpoint,
i + sals.nelts, 0);
if (target_resources_ok == 0)
- error ("No hardware breakpoint support in the target.");
+ error (_("No hardware breakpoint support in the target."));
else if (target_resources_ok < 0)
- error ("Hardware breakpoints used exceeds limit.");
+ error (_("Hardware breakpoints used exceeds limit."));
}
/* Now set all the breakpoints. */
b->cond_string = savestring (arg, strlen (arg));
b->cond = parse_exp_1 (&arg, block_for_pc (b->loc->address), 0);
if (*arg)
- error ("Junk at end of pending breakpoint condition expression");
+ error (_("Junk at end of pending breakpoint condition expression"));
}
/* If there are commands associated with the breakpoint, they should
be copied too. */
sals->nelts = 1;
}
else
- error ("No default breakpoint address now.");
+ error (_("No default breakpoint address now."));
}
else
{
if (DEPRECATED_PC_REQUIRES_RUN_BEFORE_USE (sals->sals[i].pc))
{
if (address == NULL)
- error ("Cannot break without a running program.");
+ error (_("Cannot break without a running program."));
else
- error ("Cannot break on %s without a running program.",
+ error (_("Cannot break on %s without a running program."),
address);
}
#endif
tmptok = tok;
thread = strtol (tok, &tok, 0);
if (tok == tmptok)
- error ("Junk after thread keyword.");
+ error (_("Junk after thread keyword."));
if (!valid_thread_id (thread))
- error ("Unknown thread %d\n", thread);
+ error (_("Unknown thread %d."), thread);
}
else
- error ("Junk at end of arguments.");
+ error (_("Junk at end of arguments."));
}
}
create_breakpoints (sals, addr_string, cond, cond_string,
}
if (sals.nelts > 1)
- {
- warning ("Multiple breakpoints were set.");
- warning ("Use the \"delete\" command to delete unwanted breakpoints.");
- }
+ warning (_("Multiple breakpoints were set.\n"
+ "Use the \"delete\" command to delete unwanted breakpoints."));
/* That's it. Discard the cleanups for data inserted into the
breakpoint. */
discard_cleanups (breakpoint_chain);
address. That way cleanups can take care of freeing any
memory. */
if (*address_end != '\0')
- error ("Garbage %s following breakpoint address", address_end);
+ error (_("Garbage %s following breakpoint address"), address_end);
/* Resolve all line numbers to PC's. */
breakpoint_sals_to_pc (&sals, args->address);
char *tok = args->condition;
cond[i] = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc), 0);
if (*tok != '\0')
- error ("Garbage %s follows condition", tok);
+ error (_("Garbage %s follows condition"), tok);
make_cleanup (xfree, cond[i]);
cond_string[i] = xstrdup (args->condition);
}
if (sal->pc == 0 && sal->symtab != NULL)
{
if (!find_line_pc (sal->symtab, sal->line, &pc))
- error ("No line %d in file \"%s\".",
+ error (_("No line %d in file \"%s\"."),
sal->line, sal->symtab->filename);
sal->pc = pc;
}
cond_end = tok;
}
if (*tok)
- error ("Junk at end of command.");
+ error (_("Junk at end of command."));
if (accessflag == hw_read)
bp_type = bp_read_watchpoint;
mem_cnt = can_use_hardware_watchpoint (val);
if (mem_cnt == 0 && bp_type != bp_hardware_watchpoint)
- error ("Expression cannot be implemented with read/access watchpoint.");
+ error (_("Expression cannot be implemented with read/access watchpoint."));
if (mem_cnt != 0)
{
i = hw_watchpoint_used_count (bp_type, &other_type_used);
TARGET_CAN_USE_HARDWARE_WATCHPOINT (bp_type, i + mem_cnt,
other_type_used);
if (target_resources_ok == 0 && bp_type != bp_hardware_watchpoint)
- error ("Target does not support this type of hardware watchpoint.");
+ error (_("Target does not support this type of hardware watchpoint."));
if (target_resources_ok < 0 && bp_type != bp_hardware_watchpoint)
- error ("Target can only support one kind of HW watchpoint at a time.");
+ error (_("Target can only support one kind of HW watchpoint at a time."));
}
#if defined(HPUXHPPA)
set watches after getting the program started. */
if (!target_has_execution)
{
- warning ("can't do that without a running program; try \"break main\", \"run\" first");
+ warning (_("can't do that without a running program; try \"break main\"), \"run\" first");
return;
}
#endif /* HPUXHPPA */
0, (char ***) NULL, NULL);
if (sals.nelts != 1)
- error ("Couldn't get information on specified line.");
+ error (_("Couldn't get information on specified line."));
sal = sals.sals[0];
xfree (sals.sals); /* malloc'd, so freed */
if (*arg)
- error ("Junk at end of arguments.");
+ error (_("Junk at end of arguments."));
resolve_sal_pc (&sal);
cond_string = ep_parse_optional_if_clause (&arg);
if ((*arg != '\0') && !isspace (*arg))
- error ("Junk at end of arguments.");
+ error (_("Junk at end of arguments."));
/* If this target supports it, create a fork or vfork catchpoint
and enable reporting of such events. */
create_vfork_event_catchpoint (tempflag, cond_string);
break;
default:
- error ("unsupported or unknown fork kind; cannot catch it");
+ error (_("unsupported or unknown fork kind; cannot catch it"));
break;
}
}
cond_string = ep_parse_optional_if_clause (&arg);
if ((*arg != '\0') && !isspace (*arg))
- error ("Junk at end of arguments.");
+ error (_("Junk at end of arguments."));
/* If this target supports it, create an exec catchpoint
and enable reporting of such events. */
}
if ((*arg != '\0') && !isspace (*arg))
- error ("Junk at end of arguments.");
+ error (_("Junk at end of arguments."));
/* Create a load breakpoint that only triggers when a load of
the specified dll (or any dll, if no pathname was specified)
}
if ((*arg != '\0') && !isspace (*arg))
- error ("Junk at end of arguments.");
+ error (_("Junk at end of arguments."));
/* Create an unload breakpoint that only triggers when an unload of
the specified dll (or any dll, if no pathname was specified)
bptype = bp_catch_catch;
break;
default: /* error condition */
- error ("Internal error -- invalid catchpoint kind");
+ error (_("Internal error -- invalid catchpoint kind"));
}
b = set_raw_breakpoint (*sal, bptype);
cond_string = ep_parse_optional_if_clause (&arg);
if ((*arg != '\0') && !isspace (*arg))
- error ("Junk at end of arguments.");
+ error (_("Junk at end of arguments."));
if ((ex_event != EX_EVENT_THROW) &&
(ex_event != EX_EVENT_CATCH))
- error ("Unsupported or unknown exception event; cannot catch it");
+ error (_("Unsupported or unknown exception event; cannot catch it"));
if (handle_gnu_v3_exceptions (tempflag, cond_string, ex_event, from_tty))
return;
return; /* something went wrong with setting up callbacks */
}
- warning ("Unsupported with this platform/compiler combination.");
+ warning (_("Unsupported with this platform/compiler combination."));
}
/* Cover routine to allow wrapping target_enable_exception_catchpoints
/* catch_throw_command_1 (arg1_start, tempflag, from_tty); */
/* return; */
/* Now, this is not allowed */
- error ("Catch requires an event name.");
+ error (_("Catch requires an event name."));
}
arg1_end = ep_find_event_name_end (arg1_start);
if (arg1_end == NULL)
- error ("catch requires an event");
+ error (_("catch requires an event"));
arg1_length = arg1_end + 1 - arg1_start;
/* Try to match what we found against known event names. */
if (strncmp (arg1_start, "signal", arg1_length) == 0)
{
- error ("Catch of signal not yet implemented");
+ error (_("Catch of signal not yet implemented"));
}
else if (strncmp (arg1_start, "catch", arg1_length) == 0)
{
}
else if (strncmp (arg1_start, "thread_start", arg1_length) == 0)
{
- error ("Catch of thread_start not yet implemented");
+ error (_("Catch of thread_start not yet implemented"));
}
else if (strncmp (arg1_start, "thread_exit", arg1_length) == 0)
{
- error ("Catch of thread_exit not yet implemented");
+ error (_("Catch of thread_exit not yet implemented"));
}
else if (strncmp (arg1_start, "thread_join", arg1_length) == 0)
{
- error ("Catch of thread_join not yet implemented");
+ error (_("Catch of thread_join not yet implemented"));
}
else if (strncmp (arg1_start, "start", arg1_length) == 0)
{
- error ("Catch of start not yet implemented");
+ error (_("Catch of start not yet implemented"));
}
else if (strncmp (arg1_start, "exit", arg1_length) == 0)
{
- error ("Catch of exit not yet implemented");
+ error (_("Catch of exit not yet implemented"));
}
else if (strncmp (arg1_start, "fork", arg1_length) == 0)
{
}
else if (strncmp (arg1_start, "stop", arg1_length) == 0)
{
- error ("Catch of stop not yet implemented");
+ error (_("Catch of stop not yet implemented"));
}
/* This doesn't appear to be an event name */
as the name of an exception */
/* catch_throw_command_1 (arg1_start, tempflag, from_tty); */
/* Now this is not allowed */
- error ("Unknown event kind specified for catch");
+ error (_("Unknown event kind specified for catch"));
}
}
sal.symtab = default_breakpoint_symtab;
sal.pc = default_breakpoint_address;
if (sal.symtab == 0)
- error ("No source file specified.");
+ error (_("No source file specified."));
sals.sals[0] = sal;
sals.nelts = 1;
if (found == 0)
{
if (arg)
- error ("No breakpoint at %s.", arg);
+ error (_("No breakpoint at %s."), arg);
else
- error ("No breakpoint at this line.");
+ error (_("No breakpoint at this line."));
}
if (found->next)
bpstat bs;
struct bp_location *loc;
- if (bpt == NULL)
- error ("Internal error (attempted to delete a NULL breakpoint)");
-
+ gdb_assert (bpt != NULL);
/* Has this bp already been deleted? This can happen because multiple
lists can hold pointers to bp's. bpstat lists are especial culprits.
switch (b->type)
{
case bp_none:
- warning ("attempted to reset apparently deleted breakpoint #%d?",
+ warning (_("attempted to reset apparently deleted breakpoint #%d?"),
b->number);
return 0;
case bp_breakpoint:
return;
}
- error ("No breakpoint number %d.", bptnum);
+ error (_("No breakpoint number %d."), bptnum);
}
/* Clear the ignore counts of all breakpoints. */
num = get_number (&p);
if (num == 0)
- error ("bad breakpoint number: '%s'", args);
+ error (_("bad breakpoint number: '%s'"), args);
if (*p == 0)
- error ("Second argument (specified ignore-count) is missing.");
+ error (_("Second argument (specified ignore-count) is missing."));
set_ignore_count (num,
longest_to_int (value_as_long (parse_and_eval (p))),
num = get_number_or_range (&p1);
if (num == 0)
{
- warning ("bad breakpoint number at or near '%s'", p);
+ warning (_("bad breakpoint number at or near '%s'"), p);
}
else
{
switch (bpt->type)
{
case bp_none:
- warning ("attempted to disable apparently deleted breakpoint #%d?",
+ warning (_("attempted to disable apparently deleted breakpoint #%d?"),
bpt->number);
continue;
case bp_breakpoint:
TARGET_CAN_USE_HARDWARE_WATCHPOINT (bp_hardware_breakpoint,
i + 1, 0);
if (target_resources_ok == 0)
- error ("No hardware breakpoint support in the target.");
+ error (_("No hardware breakpoint support in the target."));
else if (target_resources_ok < 0)
- error ("Hardware breakpoints used exceeds limit.");
+ error (_("Hardware breakpoints used exceeds limit."));
}
if (bpt->pending)
switch (bpt->type)
{
case bp_none:
- warning ("attempted to enable apparently deleted breakpoint #%d?",
+ warning (_("attempted to enable apparently deleted breakpoint #%d?"),
bpt->number);
continue;
case bp_breakpoint:
{
struct symtabs_and_lines sals;
if (string == 0)
- error ("Empty line specification.");
+ error (_("Empty line specification."));
if (default_breakpoint_valid)
sals = decode_line_1 (&string, funfirstline,
default_breakpoint_symtab,
sals = decode_line_1 (&string, funfirstline,
(struct symtab *) NULL, 0, (char ***) NULL, NULL);
if (*string)
- error ("Junk at end of line specification: %s", string);
+ error (_("Junk at end of line specification: %s"), string);
return sals;
}
\f
projects / deliverable / binutils-gdb.git / blobdiff