/* Data structures associated with breakpoints in GDB.
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
- 2002, 2003, 2004, 2007, 2008 Free Software Foundation, Inc.
+ 2002, 2003, 2004, 2007, 2008, 2009, 2010, 2011
+ Free Software Foundation, Inc.
This file is part of GDB.
#include "value.h"
#include "vec.h"
-#include "gdb-events.h"
-
struct value;
struct block;
+struct breakpoint_object;
+struct get_number_or_range_state;
-/* This is the maximum number of bytes a breakpoint instruction can take.
- Feel free to increase it. It's just used in a few places to size
- arrays that should be independent of the target architecture. */
+/* This is the maximum number of bytes a breakpoint instruction can
+ take. Feel free to increase it. It's just used in a few places to
+ size arrays that should be independent of the target
+ architecture. */
#define BREAKPOINT_MAX 16
\f
-/* Type of breakpoint. */
-/* FIXME In the future, we should fold all other breakpoint-like things into
- here. This includes:
- * single-step (for machines where we have to simulate single stepping)
- (probably, though perhaps it is better for it to look as much as
- possible like a single-step to wait_for_inferior). */
+/* Type of breakpoint. */
+/* FIXME In the future, we should fold all other breakpoint-like
+ things into here. This includes:
+
+ * single-step (for machines where we have to simulate single
+ stepping) (probably, though perhaps it is better for it to look as
+ much as possible like a single-step to wait_for_inferior). */
enum bptype
{
- bp_none = 0, /* Eventpoint has been deleted. */
+ bp_none = 0, /* Eventpoint has been deleted */
bp_breakpoint, /* Normal breakpoint */
bp_hardware_breakpoint, /* Hardware assisted breakpoint */
bp_until, /* used by until command */
bp_longjmp, /* secret breakpoint to find longjmp() */
bp_longjmp_resume, /* secret breakpoint to escape longjmp() */
- /* Used by wait_for_inferior for stepping over subroutine calls, for
- stepping over signal handlers, and for skipping prologues. */
+ /* An internal breakpoint that is installed on the unwinder's
+ debug hook. */
+ bp_exception,
+ /* An internal breakpoint that is set at the point where an
+ exception will land. */
+ bp_exception_resume,
+
+ /* Used by wait_for_inferior for stepping over subroutine calls,
+ for stepping over signal handlers, and for skipping
+ prologues. */
bp_step_resume,
/* Used to detect when a watchpoint expression has gone out of
bp_watchpoint_scope,
/* The breakpoint at the end of a call dummy. */
- /* FIXME: What if the function we are calling longjmp()s out of the
- call, or the user gets out with the "return" command? We currently
- have no way of cleaning up the breakpoint in these (obscure) situations.
- (Probably can solve this by noticing longjmp, "return", etc., it's
- similar to noticing when a watchpoint on a local variable goes out
- of scope (with hardware support for watchpoints)). */
+ /* FIXME: What if the function we are calling longjmp()s out of
+ the call, or the user gets out with the "return" command? We
+ currently have no way of cleaning up the breakpoint in these
+ (obscure) situations. (Probably can solve this by noticing
+ longjmp, "return", etc., it's similar to noticing when a
+ watchpoint on a local variable goes out of scope (with hardware
+ support for watchpoints)). */
bp_call_dummy,
+ /* A breakpoint set on std::terminate, that is used to catch
+ otherwise uncaught exceptions thrown during an inferior call. */
+ bp_std_terminate,
+
/* Some dynamic linkers (HP, maybe Solaris) can arrange for special
code in the inferior to run when significant events occur in the
dynamic linker (for example a library is loaded or unloaded).
bp_overlay_event,
- /* These breakpoints are used to implement the "catch load" command
- on platforms whose dynamic linkers support such functionality. */
- bp_catch_load,
-
- /* These breakpoints are used to implement the "catch unload" command
- on platforms whose dynamic linkers support such functionality. */
- bp_catch_unload,
-
- /* These are not really breakpoints, but are catchpoints that
- implement the "catch fork", "catch vfork" and "catch exec" commands
- on platforms whose kernel support such functionality. (I.e.,
- kernels which can raise an event when a fork or exec occurs, as
- opposed to the debugger setting breakpoints on functions named
- "fork" or "exec".) */
- bp_catch_fork,
- bp_catch_vfork,
- bp_catch_exec,
+ /* Master copies of longjmp breakpoints. These are always installed
+ as soon as an objfile containing longjmp is loaded, but they are
+ always disabled. While necessary, temporary clones of bp_longjmp
+ type will be created and enabled. */
+
+ bp_longjmp_master,
+
+ /* Master copies of std::terminate breakpoints. */
+ bp_std_terminate_master,
+
+ /* Like bp_longjmp_master, but for exceptions. */
+ bp_exception_master,
+
+ bp_catchpoint,
+
+ bp_tracepoint,
+ bp_fast_tracepoint,
+ bp_static_tracepoint,
+
+ /* Event for JIT compiled code generation or deletion. */
+ bp_jit_event,
};
-/* States of enablement of breakpoint. */
+/* States of enablement of breakpoint. */
enum enable_state
{
- bp_disabled, /* The eventpoint is inactive, and cannot trigger. */
- bp_enabled, /* The eventpoint is active, and can trigger. */
- bp_call_disabled, /* The eventpoint has been disabled while a call
- into the inferior is "in flight", because some
- eventpoints interfere with the implementation of
- a call on some targets. The eventpoint will be
- automatically enabled and reset when the call
- "lands" (either completes, or stops at another
- eventpoint). */
- bp_permanent /* There is a breakpoint instruction hard-wired into
- the target's code. Don't try to write another
- breakpoint instruction on top of it, or restore
- its value. Step over it using the architecture's
- SKIP_INSN macro. */
+ bp_disabled, /* The eventpoint is inactive, and cannot
+ trigger. */
+ bp_enabled, /* The eventpoint is active, and can
+ trigger. */
+ bp_call_disabled, /* The eventpoint has been disabled while a
+ call into the inferior is "in flight",
+ because some eventpoints interfere with
+ the implementation of a call on some
+ targets. The eventpoint will be
+ automatically enabled and reset when the
+ call "lands" (either completes, or stops
+ at another eventpoint). */
+ bp_startup_disabled, /* The eventpoint has been disabled during
+ inferior startup. This is necessary on
+ some targets where the main executable
+ will get relocated during startup, making
+ breakpoint addresses invalid. The
+ eventpoint will be automatically enabled
+ and reset once inferior startup is
+ complete. */
+ bp_permanent /* There is a breakpoint instruction
+ hard-wired into the target's code. Don't
+ try to write another breakpoint
+ instruction on top of it, or restore its
+ value. Step over it using the
+ architecture's SKIP_INSN macro. */
};
-/* Disposition of breakpoint. Ie: what to do after hitting it. */
+/* Disposition of breakpoint. Ie: what to do after hitting it. */
enum bpdisp
{
disp_del, /* Delete it */
- disp_del_at_next_stop, /* Delete at next stop, whether hit or not */
+ disp_del_at_next_stop, /* Delete at next stop,
+ whether hit or not */
disp_disable, /* Disable it */
disp_donttouch /* Leave it alone */
};
struct bp_target_info
{
+ /* Address space at which the breakpoint was placed. */
+ struct address_space *placed_address_space;
+
/* Address at which the breakpoint was placed. This is normally the
same as ADDRESS from the bp_location, except when adjustment
happens in gdbarch_breakpoint_from_pc. The most common form of
int shadow_len;
/* The size of the placed breakpoint, according to
- gdbarch_breakpoint_from_pc, when the breakpoint was inserted. This is
- generally the same as SHADOW_LEN, unless we did not need
+ gdbarch_breakpoint_from_pc, when the breakpoint was inserted.
+ This is generally the same as SHADOW_LEN, unless we did not need
to read from the target to implement the memory breakpoint
- (e.g. if a remote stub handled the details). We may still
- need the size to remove the breakpoint safely. */
+ (e.g. if a remote stub handled the details). We may still need
+ the size to remove the breakpoint safely. */
int placed_size;
};
the same parent breakpoint. */
struct bp_location *next;
- /* Pointer to the next breakpoint location, in a global
- list of all breakpoint locations. */
- struct bp_location *global_next;
-
+ /* The reference count. */
+ int refc;
+
/* Type of this breakpoint location. */
enum bp_loc_type loc_type;
/* Each breakpoint location must belong to exactly one higher-level
- breakpoint. This and the DUPLICATE flag are more straightforward
- than reference counting. */
+ breakpoint. This pointer is NULL iff this bp_location is no
+ longer attached to a breakpoint. For example, when a breakpoint
+ is deleted, its locations may still be found in the
+ moribund_locations list, or if we had stopped for it, in
+ bpstats. */
struct breakpoint *owner;
- /* Conditional. Break only if this expression's value is nonzero.
- Unlike string form of condition, which is associated with breakpoint,
- this is associated with location, since if breakpoint has several
- locations, the evaluation of expression can be different for
- different locations. */
+ /* Conditional. Break only if this expression's value is nonzero.
+ Unlike string form of condition, which is associated with
+ breakpoint, this is associated with location, since if breakpoint
+ has several locations, the evaluation of expression can be
+ different for different locations. Only valid for real
+ breakpoints; a watchpoint's conditional expression is stored in
+ the owner breakpoint object. */
struct expression *cond;
/* This location's address is in an unloaded solib, and so this
/* Data for specific breakpoint types. These could be a union, but
simplicity is more important than memory usage for breakpoints. */
+ /* Architecture associated with this location's address. May be
+ different from the breakpoint architecture. */
+ struct gdbarch *gdbarch;
+
+ /* The program space associated with this breakpoint location
+ address. Note that an address space may be represented in more
+ than one program space (e.g. each uClinux program will be given
+ its own program space, but there will only be one address space
+ for all of them), but we must not insert more than one location
+ at the same address in the same address space. */
+ struct program_space *pspace;
+
/* Note that zero is a perfectly valid code address on some platforms
(for example, the mn10200 (OBSOLETE) and mn10300 simulators). NULL
is not a special value for this field. Valid for all types except
bp_loc_other. */
CORE_ADDR address;
- /* For hardware watchpoints, the size of data ad ADDRESS being watches. */
+ /* For hardware watchpoints, the size of the memory region being
+ watched. */
int length;
- /* Type of hardware watchpoint. */
+ /* Type of hardware watchpoint. */
enum target_hw_bp_type watchpoint_type;
- /* For any breakpoint type with an address, this is the BFD section
- associated with the address. Used primarily for overlay debugging. */
- asection *section;
+ /* For any breakpoint type with an address, this is the section
+ associated with the address. Used primarily for overlay
+ debugging. */
+ struct obj_section *section;
/* Address at which breakpoint was requested, either by the user or
by GDB for internal breakpoints. This will usually be the same
will be called instead of the performing the default action for this
bptype. */
-struct breakpoint_ops
+struct breakpoint_ops
{
+ /* Insert the breakpoint or watchpoint or activate the catchpoint.
+ Return 0 for success, 1 if the breakpoint, watchpoint or catchpoint
+ type is not supported, -1 for failure. */
+ int (*insert_location) (struct bp_location *);
+
+ /* Remove the breakpoint/catchpoint that was previously inserted
+ with the "insert" method above. Return 0 for success, 1 if the
+ breakpoint, watchpoint or catchpoint type is not supported,
+ -1 for failure. */
+ int (*remove_location) (struct bp_location *);
+
+ /* Return non-zero if the debugger should tell the user that this
+ breakpoint was hit. */
+ int (*breakpoint_hit) (struct breakpoint *);
+
+ /* Tell how many hardware resources (debug registers) are needed
+ for this breakpoint. If this function is not provided, then
+ the breakpoint or watchpoint needs one debug register. */
+ int (*resources_needed) (const struct bp_location *);
+
/* The normal print routine for this breakpoint, called when we
hit it. */
enum print_stop_action (*print_it) (struct breakpoint *);
- /* Display information about this breakpoint, for "info breakpoints". */
- void (*print_one) (struct breakpoint *, CORE_ADDR *);
+ /* Display information about this breakpoint, for "info
+ breakpoints". */
+ void (*print_one) (struct breakpoint *, struct bp_location **);
- /* Display information about this breakpoint after setting it (roughly
- speaking; this is called from "mention"). */
+ /* Display information about this breakpoint after setting it
+ (roughly speaking; this is called from "mention"). */
void (*print_mention) (struct breakpoint *);
+
+ /* Print to FP the CLI command that recreates this breakpoint. */
+ void (*print_recreate) (struct breakpoint *, struct ui_file *fp);
};
enum watchpoint_triggered
watch_triggered_yes
};
+/* This is used to declare the VEC syscalls_to_be_caught. */
+DEF_VEC_I(int);
+
typedef struct bp_location *bp_location_p;
DEF_VEC_P(bp_location_p);
+/* A reference-counted struct command_line. This lets multiple
+ breakpoints share a single command list. This is an implementation
+ detail to the breakpoints module. */
+struct counted_command_line;
+
+/* Some targets (e.g., embedded PowerPC) need two debug registers to set
+ a watchpoint over a memory region. If this flag is true, GDB will use
+ only one register per watchpoint, thus assuming that all acesses that
+ modify a memory location happen at its starting address. */
+
+extern int target_exact_watchpoints;
+
/* Note that the ->silent field is not currently used by any commands
(though the code is in there if it was to be, and set_raw_breakpoint
does set it to 0). I implemented it because I thought it would be
struct breakpoint
{
struct breakpoint *next;
- /* Type of breakpoint. */
+ /* Type of breakpoint. */
enum bptype type;
/* Zero means disabled; remember the info but don't break here. */
enum enable_state enable_state;
- /* What to do with this breakpoint after we hit it. */
+ /* What to do with this breakpoint after we hit it. */
enum bpdisp disposition;
/* Number assigned to distinguish breakpoints. */
int number;
char *source_file;
/* Non-zero means a silent breakpoint (don't print frame info
- if we stop here). */
+ if we stop here). */
unsigned char silent;
/* Number of stops at this breakpoint that should
be continued automatically before really stopping. */
int ignore_count;
- /* Chain of command lines to execute when this breakpoint is hit. */
- struct command_line *commands;
+ /* Chain of command lines to execute when this breakpoint is
+ hit. */
+ struct counted_command_line *commands;
/* Stack depth (address of frame). If nonzero, break only if fp
equals this. */
struct frame_id frame_id;
+ /* The program space used to set the breakpoint. */
+ struct program_space *pspace;
+
/* String we used to set the breakpoint (malloc'd). */
char *addr_string;
+ /* Architecture we used to set the breakpoint. */
+ struct gdbarch *gdbarch;
/* Language we used to set the breakpoint. */
enum language language;
/* Input radix we used to set the breakpoint. */
int input_radix;
- /* String form of the breakpoint condition (malloc'd), or NULL if there
- is no condition. */
+ /* String form of the breakpoint condition (malloc'd), or NULL if
+ there is no condition. */
char *cond_string;
- /* String form of exp (malloc'd), or NULL if none. */
+ /* String form of exp to use for displaying to the user
+ (malloc'd), or NULL if none. */
char *exp_string;
+ /* String form to use for reparsing of EXP (malloc'd) or NULL. */
+ char *exp_string_reparse;
/* The expression we are watching, or NULL if not a watchpoint. */
struct expression *exp;
/* The largest block within which it is valid, or NULL if it is
valid anywhere (e.g. consists just of global symbols). */
struct block *exp_valid_block;
+ /* The conditional expression if any. NULL if not a watchpoint. */
+ struct expression *cond_exp;
+ /* The largest block within which it is valid, or NULL if it is
+ valid anywhere (e.g. consists just of global symbols). */
+ struct block *cond_exp_valid_block;
/* Value of the watchpoint the last time we checked it, or NULL
when we do not know the value yet or the value was not
readable. VAL is never lazy. */
int val_valid;
/* Holds the address of the related watchpoint_scope breakpoint
- when using watchpoints on local variables (might the concept
- of a related breakpoint be useful elsewhere, if not just call
- it the watchpoint_scope breakpoint or something like that. FIXME). */
+ when using watchpoints on local variables (might the concept of
+ a related breakpoint be useful elsewhere, if not just call it
+ the watchpoint_scope breakpoint or something like that.
+ FIXME). */
struct breakpoint *related_breakpoint;
/* Holds the frame address which identifies the frame this
should be evaluated on the outermost frame. */
struct frame_id watchpoint_frame;
+ /* Holds the thread which identifies the frame this watchpoint
+ should be considered in scope for, or `null_ptid' if the
+ watchpoint should be evaluated in all threads. */
+ ptid_t watchpoint_thread;
+
/* For hardware watchpoints, the triggered status according to the
hardware. */
enum watchpoint_triggered watchpoint_triggered;
- /* Thread number for thread-specific breakpoint, or -1 if don't care */
+ /* Thread number for thread-specific breakpoint,
+ or -1 if don't care. */
int thread;
+ /* Ada task number for task-specific breakpoint,
+ or 0 if don't care. */
+ int task;
+
/* Count of the number of times this breakpoint was taken, dumped
with the info, but not used for anything else. Useful for
seeing how many times you hit a break prior to the program
aborting, so you can back up to just before the abort. */
int hit_count;
- /* Filename of a dynamically-linked library (dll), used for
- bp_catch_load and bp_catch_unload (malloc'd), or NULL if any
- library is significant. */
- char *dll_pathname;
-
- /* Filename of a dll whose state change (e.g., load or unload)
- triggered this catchpoint. This field is only valid immediately
- after this catchpoint has triggered. */
- char *triggered_dll_pathname;
-
/* Process id of a child process whose forking triggered this
catchpoint. This field is only valid immediately after this
catchpoint has triggered. */
triggered. */
char *exec_pathname;
+ /* Syscall numbers used for the 'catch syscall' feature. If no
+ syscall has been specified for filtering, its value is NULL.
+ Otherwise, it holds a list of all syscalls to be caught. The
+ list elements are allocated with xmalloc. */
+ VEC(int) *syscalls_to_be_caught;
+
/* Methods associated with this breakpoint. */
struct breakpoint_ops *ops;
no location initially so had no context to parse
the condition in. */
int condition_not_parsed;
+
+ /* Number of times this tracepoint should single-step
+ and collect additional data. */
+ long step_count;
+
+ /* Number of times this tracepoint should be hit before
+ disabling/ending. */
+ int pass_count;
+
+ /* The number of the tracepoint on the target. */
+ int number_on_target;
+
+ /* The static tracepoint marker id, if known. */
+ char *static_trace_marker_id;
+
+ /* LTTng/UST allow more than one marker with the same ID string,
+ although it unadvised because it confuses tools. When setting
+ static tracepoints by marker ID, this will record the index in
+ the array of markers we found for the given marker ID for which
+ this static tracepoint corresponds. When resetting
+ breakpoints, we will use this index to try to find the same
+ marker again. */
+ int static_trace_marker_id_idx;
+
+ /* With a Python scripting enabled GDB, store a reference to the
+ Python object that has been associated with this breakpoint.
+ This is always NULL for a GDB that is not script enabled. It
+ can sometimes be NULL for enabled GDBs as not all breakpoint
+ types are tracked by the Python scripting API. */
+ struct breakpoint_object *py_bp_object;
+
+ /* Whether this watchpoint is exact (see target_exact_watchpoints). */
+ int exact;
};
typedef struct breakpoint *breakpoint_p;
typedef struct bpstats *bpstat;
-/* Frees any storage that is part of a bpstat.
- Does not walk the 'next' chain. */
-extern void bpstat_free (bpstat);
-
/* Clears a chain of bpstat, freeing storage
of each. */
extern void bpstat_clear (bpstat *);
is part of the bpstat is copied as well. */
extern bpstat bpstat_copy (bpstat);
-extern bpstat bpstat_stop_status (CORE_ADDR pc, ptid_t ptid);
+extern bpstat bpstat_stop_status (struct address_space *aspace,
+ CORE_ADDR pc, ptid_t ptid);
\f
/* This bpstat_what stuff tells wait_for_inferior what to do with a
- breakpoint (a challenging task). */
+ breakpoint (a challenging task).
+
+ The enum values order defines priority-like order of the actions.
+ Once you've decided that some action is appropriate, you'll never
+ go back and decide something of a lower priority is better. Each
+ of these actions is mutually exclusive with the others. That
+ means, that if you find yourself adding a new action class here and
+ wanting to tell GDB that you have two simultaneous actions to
+ handle, something is wrong, and you probably don't actually need a
+ new action type.
+
+ Note that a step resume breakpoint overrides another breakpoint of
+ signal handling (see comment in wait_for_inferior at where we set
+ the step_resume breakpoint). */
enum bpstat_what_main_action
{
else). */
BPSTAT_WHAT_KEEP_CHECKING,
- /* Rather than distinguish between noisy and silent stops here, it
- might be cleaner to have bpstat_print make that decision (also
- taking into account stop_print_frame and source_only). But the
- implications are a bit scary (interaction with auto-displays, etc.),
- so I won't try it. */
-
- /* Stop silently. */
- BPSTAT_WHAT_STOP_SILENT,
-
- /* Stop and print. */
- BPSTAT_WHAT_STOP_NOISY,
-
/* Remove breakpoints, single step once, then put them back in and
- go back to what we were doing. It's possible that this should be
- removed from the main_action and put into a separate field, to more
- cleanly handle BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE. */
+ go back to what we were doing. It's possible that this should
+ be removed from the main_action and put into a separate field,
+ to more cleanly handle
+ BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE. */
BPSTAT_WHAT_SINGLE,
/* Set longjmp_resume breakpoint, remove all other breakpoints,
- and continue. The "remove all other breakpoints" part is required
- if we are also stepping over another breakpoint as well as doing
- the longjmp handling. */
+ and continue. The "remove all other breakpoints" part is
+ required if we are also stepping over another breakpoint as
+ well as doing the longjmp handling. */
BPSTAT_WHAT_SET_LONGJMP_RESUME,
/* Clear longjmp_resume breakpoint, then handle as
BPSTAT_WHAT_KEEP_CHECKING. */
BPSTAT_WHAT_CLEAR_LONGJMP_RESUME,
+ /* Rather than distinguish between noisy and silent stops here, it
+ might be cleaner to have bpstat_print make that decision (also
+ taking into account stop_print_frame and source_only). But the
+ implications are a bit scary (interaction with auto-displays,
+ etc.), so I won't try it. */
+
+ /* Stop silently. */
+ BPSTAT_WHAT_STOP_SILENT,
+
+ /* Stop and print. */
+ BPSTAT_WHAT_STOP_NOISY,
+
/* Clear step resume breakpoint, and keep checking. */
BPSTAT_WHAT_STEP_RESUME,
+ };
- /* Check the dynamic linker's data structures for new libraries, then
- keep checking. */
- BPSTAT_WHAT_CHECK_SHLIBS,
+/* An enum indicating the kind of "stack dummy" stop. This is a bit
+ of a misnomer because only one kind of truly a stack dummy. */
+enum stop_stack_kind
+ {
+ /* We didn't stop at a stack dummy breakpoint. */
+ STOP_NONE = 0,
- /* Check the dynamic linker's data structures for new libraries, then
- resume out of the dynamic linker's callback, stop and print. */
- BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK,
+ /* Stopped at a stack dummy. */
+ STOP_STACK_DUMMY,
- /* This is just used to keep track of how many enums there are. */
- BPSTAT_WHAT_LAST
+ /* Stopped at std::terminate. */
+ STOP_STD_TERMINATE
};
struct bpstat_what
{
enum bpstat_what_main_action main_action;
- /* Did we hit a call dummy breakpoint? This only goes with a main_action
- of BPSTAT_WHAT_STOP_SILENT or BPSTAT_WHAT_STOP_NOISY (the concept of
- continuing from a call dummy without popping the frame is not a
- useful one). */
- int call_dummy;
+ /* Did we hit a call dummy breakpoint? This only goes with a
+ main_action of BPSTAT_WHAT_STOP_SILENT or
+ BPSTAT_WHAT_STOP_NOISY (the concept of continuing from a call
+ dummy without popping the frame is not a useful one). */
+ enum stop_stack_kind call_dummy;
+
+ /* Used for BPSTAT_WHAT_SET_LONGJMP_RESUME and
+ BPSTAT_WHAT_CLEAR_LONGJMP_RESUME. True if we are handling a
+ longjmp, false if we are handling an exception. */
+ int is_longjmp;
};
/* The possible return values for print_bpstat, print_it_normal,
- print_it_done, print_it_noop. */
+ print_it_done, print_it_noop. */
enum print_stop_action
{
PRINT_UNKNOWN = -1,
/* Tell what to do about this bpstat. */
struct bpstat_what bpstat_what (bpstat);
\f
-/* Find the bpstat associated with a breakpoint. NULL otherwise. */
+/* Find the bpstat associated with a breakpoint. NULL otherwise. */
bpstat bpstat_find_breakpoint (bpstat, struct breakpoint *);
-/* Find a step_resume breakpoint associated with this bpstat.
- (If there are multiple step_resume bp's on the list, this function
- will arbitrarily pick one.)
-
- It is an error to use this function if BPSTAT doesn't contain a
- step_resume breakpoint.
-
- See wait_for_inferior's use of this function.
- */
-extern struct breakpoint *bpstat_find_step_resume_breakpoint (bpstat);
-
/* Nonzero if a signal that we got in wait() was due to circumstances
explained by the BS. */
/* Currently that is true if we have hit a breakpoint, or if there is
a watchpoint enabled. */
#define bpstat_explains_signal(bs) ((bs) != NULL)
+/* Nonzero is this bpstat causes a stop. */
+extern int bpstat_causes_stop (bpstat);
+
/* Nonzero if we should step constantly (e.g. watchpoints on machines
without hardware support). This isn't related to a specific bpstat,
just to things like whether watchpoints are set. */
return means print the frame as well as the source line). */
extern enum print_stop_action bpstat_print (bpstat);
-/* Put in *NUM the breakpoint number of the first breakpoint we are stopped
- at. *BSP upon return is a bpstat which points to the remaining
- breakpoints stopped at (but which is not guaranteed to be good for
- anything but further calls to bpstat_num).
+/* Put in *NUM the breakpoint number of the first breakpoint we are
+ stopped at. *BSP upon return is a bpstat which points to the
+ remaining breakpoints stopped at (but which is not guaranteed to be
+ good for anything but further calls to bpstat_num).
+
Return 0 if passed a bpstat which does not indicate any breakpoints.
Return -1 if stopped at a breakpoint that has been deleted since
we set it.
Return 1 otherwise. */
extern int bpstat_num (bpstat *, int *);
-/* Perform actions associated with having stopped at *BSP. Actually, we just
- use this for breakpoint commands. Perhaps other actions will go here
- later, but this is executed at a late time (from the command loop). */
-extern void bpstat_do_actions (bpstat *);
+/* Perform actions associated with the stopped inferior. Actually, we
+ just use this for breakpoint commands. Perhaps other actions will
+ go here later, but this is executed at a late time (from the
+ command loop). */
+extern void bpstat_do_actions (void);
/* Modify BS so that the actions will not be performed. */
extern void bpstat_clear_actions (bpstat);
-/* Given a bpstat that records zero or more triggered eventpoints, this
- function returns another bpstat which contains only the catchpoints
- on that first list, if any.
- */
-extern void bpstat_get_triggered_catchpoints (bpstat, bpstat *);
-
/* Implementation: */
-/* Values used to tell the printing routine how to behave for this bpstat. */
+/* Values used to tell the printing routine how to behave for this
+ bpstat. */
enum bp_print_how
{
/* This is used when we want to do a normal printing of the reason
- for stopping. The output will depend on the type of eventpoint
- we are dealing with. This is the default value, most commonly
- used. */
+ for stopping. The output will depend on the type of eventpoint
+ we are dealing with. This is the default value, most commonly
+ used. */
print_it_normal,
- /* This is used when nothing should be printed for this bpstat entry. */
+ /* This is used when nothing should be printed for this bpstat
+ entry. */
print_it_noop,
/* This is used when everything which needs to be printed has
already been printed. But we still want to print the frame. */
struct bpstats
{
- /* Linked list because there can be two breakpoints at the same
- place, and a bpstat reflects the fact that both have been hit. */
+ /* Linked list because there can be more than one breakpoint at
+ the same place, and a bpstat reflects the fact that all have
+ been hit. */
bpstat next;
- /* Breakpoint that we are at. */
- const struct bp_location *breakpoint_at;
- /* Commands left to be done. */
- struct command_line *commands;
+
+ /* Location that caused the stop. Locations are refcounted, so
+ this will never be NULL. Note that this location may end up
+ detached from a breakpoint, but that does not necessary mean
+ that the struct breakpoint is gone. E.g., consider a
+ watchpoint with a condition that involves an inferior function
+ call. Watchpoint locations are recreated often (on resumes,
+ hence on infcalls too). Between creating the bpstat and after
+ evaluating the watchpoint condition, this location may hence
+ end up detached from its original owner watchpoint, even though
+ the watchpoint is still listed. If it's condition evaluates as
+ true, we still want this location to cause a stop, and we will
+ still need to know which watchpoint it was originally attached.
+ What this means is that we should not (in most cases) follow
+ the `bpstat->bp_location->owner' link, but instead use the
+ `breakpoint_at' field below. */
+ struct bp_location *bp_location_at;
+
+ /* Breakpoint that caused the stop. This is nullified if the
+ breakpoint ends up being deleted. See comments on
+ `bp_location_at' above for why do we need this field instead of
+ following the location's owner. */
+ struct breakpoint *breakpoint_at;
+
+ /* The associated command list. */
+ struct counted_command_line *commands;
+
+ /* Commands left to be done. This points somewhere in
+ base_command. */
+ struct command_line *commands_left;
+
/* Old value associated with a watchpoint. */
struct value *old_val;
{
inf_starting,
inf_running,
- inf_exited
+ inf_exited,
+ inf_execd
};
/* The possible return values for breakpoint_here_p.
/* Prototypes for breakpoint-related functions. */
-extern enum breakpoint_here breakpoint_here_p (CORE_ADDR);
+extern enum breakpoint_here breakpoint_here_p (struct address_space *,
+ CORE_ADDR);
+
+extern int moribund_breakpoint_here_p (struct address_space *, CORE_ADDR);
+
+extern int breakpoint_inserted_here_p (struct address_space *, CORE_ADDR);
-extern int breakpoint_inserted_here_p (CORE_ADDR);
+extern int regular_breakpoint_inserted_here_p (struct address_space *,
+ CORE_ADDR);
-extern int regular_breakpoint_inserted_here_p (CORE_ADDR);
+extern int software_breakpoint_inserted_here_p (struct address_space *,
+ CORE_ADDR);
-extern int software_breakpoint_inserted_here_p (CORE_ADDR);
+/* Returns true if there's a hardware watchpoint or access watchpoint
+ inserted in the range defined by ADDR and LEN. */
+extern int hardware_watchpoint_inserted_in_range (struct address_space *,
+ CORE_ADDR addr,
+ ULONGEST len);
-extern int breakpoint_thread_match (CORE_ADDR, ptid_t);
+extern int breakpoint_thread_match (struct address_space *,
+ CORE_ADDR, ptid_t);
extern void until_break_command (char *, int, int);
extern void breakpoint_re_set_thread (struct breakpoint *);
extern struct breakpoint *set_momentary_breakpoint
- (struct symtab_and_line, struct frame_id, enum bptype);
+ (struct gdbarch *, struct symtab_and_line, struct frame_id, enum bptype);
extern struct breakpoint *set_momentary_breakpoint_at_pc
- (CORE_ADDR pc, enum bptype type);
+ (struct gdbarch *, CORE_ADDR pc, enum bptype type);
+
+extern struct breakpoint *clone_momentary_breakpoint (struct breakpoint *bpkt);
extern void set_ignore_count (int, int, int);
-extern void set_default_breakpoint (int, CORE_ADDR, struct symtab *, int);
+extern void set_default_breakpoint (int, struct program_space *,
+ CORE_ADDR, struct symtab *, int);
extern void breakpoint_init_inferior (enum inf_context);
extern void breakpoint_auto_delete (bpstat);
-extern void breakpoint_clear_ignore_counts (void);
+/* Return the chain of command lines to execute when this breakpoint
+ is hit. */
+extern struct command_line *breakpoint_commands (struct breakpoint *b);
extern void break_command (char *, int);
extern void hbreak_command_wrapper (char *, int);
extern void thbreak_command_wrapper (char *, int);
extern void rbreak_command_wrapper (char *, int);
-extern void watch_command_wrapper (char *, int);
-extern void awatch_command_wrapper (char *, int);
-extern void rwatch_command_wrapper (char *, int);
+extern void watch_command_wrapper (char *, int, int);
+extern void awatch_command_wrapper (char *, int, int);
+extern void rwatch_command_wrapper (char *, int, int);
extern void tbreak_command (char *, int);
-extern void set_breakpoint (char *address, char *condition,
- int hardwareflag, int tempflag,
- int thread, int ignore_count,
- int pending);
+extern int create_breakpoint (struct gdbarch *gdbarch, char *arg,
+ char *cond_string, int thread,
+ int parse_condition_and_thread,
+ int tempflag, enum bptype wanted_type,
+ int ignore_count,
+ enum auto_boolean pending_break_support,
+ struct breakpoint_ops *ops,
+ int from_tty,
+ int enabled,
+ int internal);
extern void insert_breakpoints (void);
extern int remove_breakpoints (void);
+extern int remove_breakpoints_pid (int pid);
+
/* This function can be used to physically insert eventpoints from the
specified traced inferior process, without modifying the breakpoint
- package's state. This can be useful for those targets which support
- following the processes of a fork() or vfork() system call, when both
- of the resulting two processes are to be followed. */
+ package's state. This can be useful for those targets which
+ support following the processes of a fork() or vfork() system call,
+ when both of the resulting two processes are to be followed. */
extern int reattach_breakpoints (int);
/* This function can be used to update the breakpoint package's state
- A step-resume breakpoint, if any, is explicitly removed from the
breakpoint list.
- All eventpoints without a symbolic address are removed from the
- breakpoint list. */
+ breakpoint list. */
extern void update_breakpoints_after_exec (void);
/* This function can be used to physically remove hardware breakpoints
inferior_ptid. */
extern int detach_breakpoints (int);
-extern void set_longjmp_breakpoint (void);
+/* This function is called when program space PSPACE is about to be
+ deleted. It takes care of updating breakpoints to not reference
+ this PSPACE anymore. */
+extern void breakpoint_program_space_exit (struct program_space *pspace);
+
+extern void set_longjmp_breakpoint (struct thread_info *tp,
+ struct frame_id frame);
extern void delete_longjmp_breakpoint (int thread);
extern void enable_overlay_breakpoints (void);
extern void disable_overlay_breakpoints (void);
+extern void set_std_terminate_breakpoint (void);
+extern void delete_std_terminate_breakpoint (void);
+
/* These functions respectively disable or reenable all currently
enabled watchpoints. When disabled, the watchpoints are marked
call_disabled. When reenabled, they are marked enabled.
extern void enable_watchpoints_after_interactive_call_stop (void);
+/* These functions disable and re-enable all breakpoints during
+ inferior startup. They are intended to be called from solib
+ code where necessary. This is needed on platforms where the
+ main executable is relocated at some point during startup
+ processing, making breakpoint addresses invalid.
+
+ If additional breakpoints are created after the routine
+ disable_breakpoints_before_startup but before the routine
+ enable_breakpoints_after_startup was called, they will also
+ be marked as disabled. */
+extern void disable_breakpoints_before_startup (void);
+extern void enable_breakpoints_after_startup (void);
+
/* For script interpreters that need to define breakpoint commands
- after they've already read the commands into a struct command_line. */
+ after they've already read the commands into a struct
+ command_line. */
extern enum command_control_type commands_from_control_command
(char *arg, struct command_line *cmd);
extern void clear_breakpoint_hit_counts (void);
-extern int get_number (char **);
-
-extern int get_number_or_range (char **);
+extern struct breakpoint *get_breakpoint (int num);
-/* The following are for displays, which aren't really breakpoints, but
- here is as good a place as any for them. */
+/* The following are for displays, which aren't really breakpoints,
+ but here is as good a place as any for them. */
extern void disable_current_display (void);
extern void enable_breakpoint (struct breakpoint *);
+extern void breakpoint_set_commands (struct breakpoint *b,
+ struct command_line *commands);
+
+extern void breakpoint_set_silent (struct breakpoint *b, int silent);
+
+extern void breakpoint_set_thread (struct breakpoint *b, int thread);
+
+extern void breakpoint_set_task (struct breakpoint *b, int task);
+
/* Clear the "inserted" flag in all breakpoints. */
extern void mark_breakpoints_out (void);
extern void make_breakpoint_permanent (struct breakpoint *);
-extern struct breakpoint *create_solib_event_breakpoint (CORE_ADDR);
+extern struct breakpoint *create_jit_event_breakpoint (struct gdbarch *,
+ CORE_ADDR);
-extern struct breakpoint *create_thread_event_breakpoint (CORE_ADDR);
+extern struct breakpoint *create_solib_event_breakpoint (struct gdbarch *,
+ CORE_ADDR);
+
+extern struct breakpoint *create_thread_event_breakpoint (struct gdbarch *,
+ CORE_ADDR);
+
+extern void remove_jit_event_breakpoints (void);
extern void remove_solib_event_breakpoints (void);
extern void disable_breakpoints_in_shlibs (void);
-/* This function returns TRUE if ep is a catchpoint. */
+/* This function returns TRUE if ep is a catchpoint. */
extern int ep_is_catchpoint (struct breakpoint *);
-/* This function returns TRUE if ep is a catchpoint of a
- shared library (aka dynamically-linked library) event,
- such as a library load or unload. */
-extern int ep_is_shlib_catchpoint (struct breakpoint *);
-
/* Enable breakpoints and delete when hit. Called with ARG == NULL
- deletes all breakpoints. */
+ deletes all breakpoints. */
extern void delete_command (char *arg, int from_tty);
-/* Pull all H/W watchpoints from the target. Return non-zero if the
- remove fails. */
+/* Pull all H/W watchpoints from the target. Return non-zero if the
+ remove fails. */
extern int remove_hw_watchpoints (void);
-/* Manage a software single step breakpoint (or two). Insert may be called
- twice before remove is called. */
-extern void insert_single_step_breakpoint (CORE_ADDR);
+/* Manage a software single step breakpoint (or two). Insert may be
+ called twice before remove is called. */
+extern void insert_single_step_breakpoint (struct gdbarch *,
+ struct address_space *,
+ CORE_ADDR);
+extern int single_step_breakpoints_inserted (void);
extern void remove_single_step_breakpoints (void);
+extern void cancel_single_step_breakpoints (void);
/* Manage manual breakpoints, separate from the normal chain of
breakpoints. These functions are used in murky target-specific
ways. Please do not add more uses! */
-extern void *deprecated_insert_raw_breakpoint (CORE_ADDR);
-extern int deprecated_remove_raw_breakpoint (void *);
+extern void *deprecated_insert_raw_breakpoint (struct gdbarch *,
+ struct address_space *,
+ CORE_ADDR);
+extern int deprecated_remove_raw_breakpoint (struct gdbarch *, void *);
/* Check if any hardware watchpoints have triggered, according to the
target. */
in our opinion won't ever trigger. */
extern void breakpoint_retire_moribund (void);
+/* Set break condition of breakpoint B to EXP. */
+extern void set_breakpoint_condition (struct breakpoint *b, char *exp,
+ int from_tty);
+
+/* Checks if we are catching syscalls or not.
+ Returns 0 if not, greater than 0 if we are. */
+extern int catch_syscall_enabled (void);
+
+/* Checks if we are catching syscalls with the specific
+ syscall_number. Used for "filtering" the catchpoints.
+ Returns 0 if not, greater than 0 if we are. */
+extern int catching_syscall_number (int syscall_number);
+
+/* Return a tracepoint with the given number if found. */
+extern struct breakpoint *get_tracepoint (int num);
+
+extern struct breakpoint *get_tracepoint_by_number_on_target (int num);
+
+/* Find a tracepoint by parsing a number in the supplied string. */
+extern struct breakpoint *
+ get_tracepoint_by_number (char **arg,
+ struct get_number_or_range_state *state,
+ int optional_p);
+
+/* Return a vector of all tracepoints currently defined. The vector
+ is newly allocated; the caller should free when done with it. */
+extern VEC(breakpoint_p) *all_tracepoints (void);
+
+extern int is_tracepoint (const struct breakpoint *b);
+
+/* Return a vector of all static tracepoints defined at ADDR. The
+ vector is newly allocated; the caller should free when done with
+ it. */
+extern VEC(breakpoint_p) *static_tracepoints_here (CORE_ADDR addr);
+
+/* Function that can be passed to read_command_line to validate
+ that each command is suitable for tracepoint command list. */
+extern void check_tracepoint_command (char *line, void *closure);
+
+/* Call at the start and end of an "rbreak" command to register
+ breakpoint numbers for a later "commands" command. */
+extern void start_rbreak_breakpoints (void);
+extern void end_rbreak_breakpoints (void);
+
+/* Breakpoint iterator function.
+
+ Calls a callback function once for each breakpoint, so long as the
+ callback function returns false. If the callback function returns
+ true, the iteration will end and the current breakpoint will be
+ returned. This can be useful for implementing a search for a
+ breakpoint with arbitrary attributes, or for applying an operation
+ to every breakpoint. */
+extern struct breakpoint *iterate_over_breakpoints (int (*) (struct breakpoint *,
+ void *), void *);
+
+extern int user_breakpoint_p (struct breakpoint *);
+
#endif /* !defined (BREAKPOINT_H) */