/* Data structures associated with breakpoints in GDB.
- Copyright (C) 1992-2004, 2007-2012 Free Software Foundation, Inc.
+ Copyright (C) 1992-2015 Free Software Foundation, Inc.
This file is part of GDB.
#include "vec.h"
#include "ax.h"
#include "command.h"
+#include "break-common.h"
+#include "probe.h"
struct value;
struct block;
-struct breakpoint_object;
+struct gdbpy_breakpoint_object;
+struct gdbscm_breakpoint_object;
struct get_number_or_range_state;
struct thread_info;
struct bpstats;
struct bp_location;
struct linespec_result;
struct linespec_sals;
+struct event_location;
/* This is the maximum number of bytes a breakpoint instruction can
take. Feel free to increase it. It's just used in a few places to
\f
/* Type of breakpoint. */
-/* FIXME In the future, we should fold all other breakpoint-like
- things into here. This includes:
-
- * single-step (for machines where we have to simulate single
- stepping) (probably, though perhaps it is better for it to look as
- much as possible like a single-step to wait_for_inferior). */
enum bptype
{
bp_none = 0, /* Eventpoint has been deleted */
bp_breakpoint, /* Normal breakpoint */
bp_hardware_breakpoint, /* Hardware assisted breakpoint */
+ bp_single_step, /* Software single-step */
bp_until, /* used by until command */
bp_finish, /* used by finish command */
bp_watchpoint, /* Watchpoint */
automatically enabled and reset when the
call "lands" (either completes, or stops
at another eventpoint). */
- bp_permanent /* There is a breakpoint instruction
- hard-wired into the target's code. Don't
- try to write another breakpoint
- instruction on top of it, or restore its
- value. Step over it using the
- architecture's SKIP_INSN macro. */
};
disp_donttouch /* Leave it alone */
};
-enum target_hw_bp_type
- {
- hw_write = 0, /* Common HW watchpoint */
- hw_read = 1, /* Read HW watchpoint */
- hw_access = 2, /* Access HW watchpoint */
- hw_execute = 3 /* Execute HW breakpoint */
- };
-
-
/* Status of breakpoint conditions used when synchronizing
conditions with the target. */
/* Address space at which the breakpoint was placed. */
struct address_space *placed_address_space;
- /* Address at which the breakpoint was placed. This is normally the
- same as ADDRESS from the bp_location, except when adjustment
- happens in gdbarch_breakpoint_from_pc. The most common form of
- adjustment is stripping an alternate ISA marker from the PC which
- is used to determine the type of breakpoint to insert. */
+ /* Address at which the breakpoint was placed. This is normally
+ the same as REQUESTED_ADDRESS, except when adjustment happens in
+ gdbarch_breakpoint_from_pc. The most common form of adjustment
+ is stripping an alternate ISA marker from the PC which is used
+ to determine the type of breakpoint to insert. */
CORE_ADDR placed_address;
+ /* Address at which the breakpoint was requested. */
+ CORE_ADDR reqstd_address;
+
/* If this is a ranged breakpoint, then this field contains the
length of the range that will be watched for execution. */
int length;
/* Nonzero if this breakpoint is now inserted. */
char inserted;
+ /* Nonzero if this is a permanent breakpoint. There is a breakpoint
+ instruction hard-wired into the target's code. Don't try to
+ write another breakpoint instruction on top of it, or restore its
+ value. Step over it using the architecture's
+ gdbarch_skip_permanent_breakpoint method. */
+ char permanent;
+
/* Nonzero if this is not the first breakpoint in the list
for the given address. location of tracepoint can _never_
be duplicated with other locations of tracepoints and other
/* If the location comes from a probe point, this is the probe associated
with it. */
- struct probe *probe;
+ struct bound_probe probe;
char *function_name;
it becomes 0 this location is retired. */
int events_till_retirement;
- /* Line number of this address. */
+ /* Line number which was used to place this location.
+
+ Breakpoint placed into a comment keeps it's user specified line number
+ despite ADDRESS resolves into a different line number. */
int line_number;
- /* Source file name of this address. */
+ /* Symtab which was used to place this location. This is used
+ to find the corresponding source file name. */
+
+ struct symtab *symtab;
+};
+
+/* The possible return values for print_bpstat, print_it_normal,
+ print_it_done, print_it_noop. */
+enum print_stop_action
+{
+ /* We printed nothing or we need to do some more analysis. */
+ PRINT_UNKNOWN = -1,
+
+ /* We printed something, and we *do* desire that something to be
+ followed by a location. */
+ PRINT_SRC_AND_LOC,
- char *source_file;
+ /* We printed something, and we do *not* desire that something to be
+ followed by a location. */
+ PRINT_SRC_ONLY,
+
+ /* We already printed all we needed to print, don't print anything
+ else. */
+ PRINT_NOTHING
};
/* This structure is a collection of function pointers that, if available,
/* Print to FP the CLI command that recreates this breakpoint. */
void (*print_recreate) (struct breakpoint *, struct ui_file *fp);
- /* Create SALs from address string, storing the result in linespec_result.
+ /* Create SALs from location, storing the result in linespec_result.
For an explanation about the arguments, see the function
- `create_sals_from_address_default'.
+ `create_sals_from_location_default'.
This function is called inside `create_breakpoint'. */
- void (*create_sals_from_address) (char **, struct linespec_result *,
- enum bptype, char *, char **);
+ void (*create_sals_from_location) (const struct event_location *location,
+ struct linespec_result *canonical,
+ enum bptype type_wanted);
/* This method will be responsible for creating a breakpoint given its SALs.
Usually, it just calls `create_breakpoints_sal' (for ordinary
This function is called inside `create_breakpoint'. */
void (*create_breakpoints_sal) (struct gdbarch *,
struct linespec_result *,
- struct linespec_sals *, char *,
- char *,
+ char *, char *,
enum bptype, enum bpdisp, int, int,
int, const struct breakpoint_ops *,
int, int, int, unsigned);
- /* Given the address string (second parameter), this method decodes it
+ /* Given the location (second parameter), this method decodes it
and provides the SAL locations related to it. For ordinary breakpoints,
it calls `decode_line_full'.
- This function is called inside `addr_string_to_sals'. */
- void (*decode_linespec) (struct breakpoint *, char **,
- struct symtabs_and_lines *);
+ This function is called inside `location_to_sals'. */
+ void (*decode_location) (struct breakpoint *b,
+ const struct event_location *location,
+ struct symtabs_and_lines *sals);
+
+ /* Return true if this breakpoint explains a signal. See
+ bpstat_explains_signal. */
+ int (*explains_signal) (struct breakpoint *, enum gdb_signal);
+
+ /* Called after evaluating the breakpoint's condition,
+ and only if it evaluated true. */
+ void (*after_condition_true) (struct bpstats *bs);
};
/* Helper for breakpoint_ops->print_recreate implementations. Prints
non-thread-specific ordinary breakpoints this is NULL. */
struct program_space *pspace;
- /* String we used to set the breakpoint (malloc'd). */
- char *addr_string;
+ /* Location we used to set the breakpoint (malloc'd). */
+ struct event_location *location;
/* The filter that should be passed to decode_line_full when
re-setting this breakpoint. This may be NULL, but otherwise is
allocated with xmalloc. */
char *filter;
- /* For a ranged breakpoint, the string we used to find
+ /* For a ranged breakpoint, the location we used to find
the end of the range (malloc'd). */
- char *addr_string_range_end;
+ struct event_location *location_range_end;
/* Architecture we used to set the breakpoint. */
struct gdbarch *gdbarch;
there is no condition. */
char *cond_string;
- /* String form of extra parameters, or NULL if there are none. */
+ /* String form of extra parameters, or NULL if there are none.
+ Malloc'd. */
char *extra_string;
/* Holds the address of the related watchpoint_scope breakpoint
Python object that has been associated with this breakpoint.
This is always NULL for a GDB that is not script enabled. It
can sometimes be NULL for enabled GDBs as not all breakpoint
- types are tracked by the Python scripting API. */
- struct breakpoint_object *py_bp_object;
+ types are tracked by the scripting language API. */
+ struct gdbpy_breakpoint_object *py_bp_object;
+
+ /* Same as py_bp_object, but for Scheme. */
+ struct gdbscm_breakpoint_object *scm_bp_object;
};
/* An instance of this type is used to represent a watchpoint. It
struct expression *exp;
/* The largest block within which it is valid, or NULL if it is
valid anywhere (e.g. consists just of global symbols). */
- struct block *exp_valid_block;
+ const struct block *exp_valid_block;
/* The conditional expression if any. */
struct expression *cond_exp;
/* The largest block within which it is valid, or NULL if it is
valid anywhere (e.g. consists just of global symbols). */
- struct block *cond_exp_valid_block;
+ const struct block *cond_exp_valid_block;
/* Value of the watchpoint the last time we checked it, or NULL when
we do not know the value yet or the value was not readable. VAL
is never lazy. */
then an error occurred reading the value. */
int val_valid;
+ /* When watching the location of a bitfield, contains the offset and size of
+ the bitfield. Otherwise contains 0. */
+ int val_bitpos;
+ int val_bitsize;
+
/* Holds the frame address which identifies the frame this
watchpoint should be evaluated in, or `null' if the watchpoint
should be evaluated on the outermost frame. */
CORE_ADDR hw_wp_mask;
};
+/* Given a function FUNC (struct breakpoint *B, void *DATA) and
+ USER_DATA, call FUNC for every known breakpoint passing USER_DATA
+ as argument.
+
+ If FUNC returns 1, the loop stops and the current
+ 'struct breakpoint' being processed is returned. If FUNC returns
+ zero, the loop continues.
+
+ This function returns either a 'struct breakpoint' pointer or NULL.
+ It was based on BFD's bfd_sections_find_if function. */
+
+extern struct breakpoint *breakpoint_find_if
+ (int (*func) (struct breakpoint *b, void *d), void *user_data);
+
/* Return true if BPT is either a software breakpoint or a hardware
breakpoint. */
int is_longjmp;
};
-/* The possible return values for print_bpstat, print_it_normal,
- print_it_done, print_it_noop. */
-enum print_stop_action
- {
- /* We printed nothing or we need to do some more analysis. */
- PRINT_UNKNOWN = -1,
-
- /* We printed something, and we *do* desire that something to be
- followed by a location. */
- PRINT_SRC_AND_LOC,
-
- /* We printed something, and we do *not* desire that something to
- be followed by a location. */
- PRINT_SRC_ONLY,
-
- /* We already printed all we needed to print, don't print anything
- else. */
- PRINT_NOTHING
- };
-
/* Tell what to do about this bpstat. */
struct bpstat_what bpstat_what (bpstat);
-\f
+
+/* Run breakpoint event callbacks associated with the breakpoints that
+ triggered. */
+extern void bpstat_run_callbacks (bpstat bs_head);
+
/* Find the bpstat associated with a breakpoint. NULL otherwise. */
bpstat bpstat_find_breakpoint (bpstat, struct breakpoint *);
-/* Nonzero if a signal that we got in wait() was due to circumstances
- explained by the BS. */
-/* Currently that is true if we have hit a breakpoint, or if there is
- a watchpoint enabled. */
-#define bpstat_explains_signal(bs) ((bs) != NULL)
+/* Nonzero if a signal that we got in target_wait() was due to
+ circumstances explained by the bpstat; the signal is therefore not
+ random. */
+extern int bpstat_explains_signal (bpstat, enum gdb_signal);
/* Nonzero is this bpstat causes a stop. */
extern int bpstat_causes_stop (bpstat);
/* Prototypes for breakpoint-related functions. */
+/* Return 1 if there's a program/permanent breakpoint planted in
+ memory at ADDRESS, return 0 otherwise. */
+
+extern int program_breakpoint_here_p (struct gdbarch *gdbarch, CORE_ADDR address);
+
extern enum breakpoint_here breakpoint_here_p (struct address_space *,
CORE_ADDR);
+/* Return true if an enabled breakpoint exists in the range defined by
+ ADDR and LEN, in ASPACE. */
+extern int breakpoint_in_range_p (struct address_space *aspace,
+ CORE_ADDR addr, ULONGEST len);
+
extern int moribund_breakpoint_here_p (struct address_space *, CORE_ADDR);
extern int breakpoint_inserted_here_p (struct address_space *, CORE_ADDR);
extern int software_breakpoint_inserted_here_p (struct address_space *,
CORE_ADDR);
+/* Return non-zero iff there is a hardware breakpoint inserted at
+ PC. */
+extern int hardware_breakpoint_inserted_here_p (struct address_space *,
+ CORE_ADDR);
+
+/* Check whether any location of BP is inserted at PC. */
+
+extern int breakpoint_has_location_inserted_here (struct breakpoint *bp,
+ struct address_space *aspace,
+ CORE_ADDR pc);
+
+extern int single_step_breakpoint_inserted_here_p (struct address_space *,
+ CORE_ADDR);
+
/* Returns true if there's a hardware watchpoint or access watchpoint
inserted in the range defined by ADDR and LEN. */
extern int hardware_watchpoint_inserted_in_range (struct address_space *,
CORE_ADDR addr,
ULONGEST len);
-extern int breakpoint_thread_match (struct address_space *,
- CORE_ADDR, ptid_t);
+/* Returns true if {ASPACE1,ADDR1} and {ASPACE2,ADDR2} represent the
+ same breakpoint location. In most targets, this can only be true
+ if ASPACE1 matches ASPACE2. On targets that have global
+ breakpoints, the address space doesn't really matter. */
+
+extern int breakpoint_address_match (struct address_space *aspace1,
+ CORE_ADDR addr1,
+ struct address_space *aspace2,
+ CORE_ADDR addr2);
extern void until_break_command (char *, int, int);
extern void rwatch_command_wrapper (char *, int, int);
extern void tbreak_command (char *, int);
+extern struct breakpoint_ops base_breakpoint_ops;
extern struct breakpoint_ops bkpt_breakpoint_ops;
extern struct breakpoint_ops tracepoint_breakpoint_ops;
+extern struct breakpoint_ops dprintf_breakpoint_ops;
extern void initialize_breakpoint_ops (void);
extern void
add_catch_command (char *name, char *docstring,
- void (*sfunc) (char *args, int from_tty,
- struct cmd_list_element *command),
+ cmd_sfunc_ftype *sfunc,
completer_ftype *completer,
void *user_data_catch,
void *user_data_tcatch);
char *addr_string,
const struct breakpoint_ops *ops,
int tempflag,
+ int enabled,
int from_tty);
+extern void init_catchpoint (struct breakpoint *b,
+ struct gdbarch *gdbarch, int tempflag,
+ char *cond_string,
+ const struct breakpoint_ops *ops);
+
/* Add breakpoint B on the breakpoint list, and notify the user, the
target and breakpoint_created observers of its existence. If
INTERNAL is non-zero, the breakpoint number will be allocated from
CREATE_BREAKPOINT_FLAGS_INSERTED = 1 << 0
};
-extern int create_breakpoint (struct gdbarch *gdbarch, char *arg,
+/* Set a breakpoint. This function is shared between CLI and MI functions
+ for setting a breakpoint at LOCATION.
+
+ This function has two major modes of operations, selected by the
+ PARSE_EXTRA parameter.
+
+ If PARSE_EXTRA is zero, LOCATION is just the breakpoint's location,
+ with condition, thread, and extra string specified by the COND_STRING,
+ THREAD, and EXTRA_STRING parameters.
+
+ If PARSE_EXTRA is non-zero, this function will attempt to extract
+ the condition, thread, and extra string from EXTRA_STRING, ignoring
+ the similarly named parameters.
+
+ If INTERNAL is non-zero, the breakpoint number will be allocated
+ from the internal breakpoint count.
+
+ Returns true if any breakpoint was created; false otherwise. */
+
+extern int create_breakpoint (struct gdbarch *gdbarch,
+ const struct event_location *location,
char *cond_string, int thread,
char *extra_string,
- int parse_condition_and_thread,
+ int parse_extra,
int tempflag, enum bptype wanted_type,
int ignore_count,
enum auto_boolean pending_break_support,
extern void delete_longjmp_breakpoint_at_next_stop (int thread);
extern struct breakpoint *set_longjmp_breakpoint_for_call_dummy (void);
-extern void check_longjmp_breakpoint_for_call_dummy (int thread);
+extern void check_longjmp_breakpoint_for_call_dummy (struct thread_info *tp);
extern void enable_overlay_breakpoints (void);
extern void disable_overlay_breakpoints (void);
/* Clear the "inserted" flag in all breakpoints. */
extern void mark_breakpoints_out (void);
-extern void make_breakpoint_permanent (struct breakpoint *);
-
extern struct breakpoint *create_jit_event_breakpoint (struct gdbarch *,
CORE_ADDR);
extern struct breakpoint *create_solib_event_breakpoint (struct gdbarch *,
CORE_ADDR);
+/* Create an solib event breakpoint at ADDRESS in the current program
+ space, and immediately try to insert it. Returns a pointer to the
+ breakpoint on success. Deletes the new breakpoint and returns NULL
+ if inserting the breakpoint fails. */
+extern struct breakpoint *create_and_insert_solib_event_breakpoint
+ (struct gdbarch *gdbarch, CORE_ADDR address);
+
extern struct breakpoint *create_thread_event_breakpoint (struct gdbarch *,
CORE_ADDR);
extern void remove_solib_event_breakpoints (void);
+/* Mark solib event breakpoints of the current program space with
+ delete at next stop disposition. */
+extern void remove_solib_event_breakpoints_at_next_stop (void);
+
extern void remove_thread_event_breakpoints (void);
extern void disable_breakpoints_in_shlibs (void);
/* This function returns TRUE if ep is a catchpoint. */
extern int is_catchpoint (struct breakpoint *);
+/* Shared helper function (MI and CLI) for creating and installing
+ a shared object event catchpoint. */
+extern void add_solib_catchpoint (char *arg, int is_load, int is_temp,
+ int enabled);
+
/* Enable breakpoints and delete when hit. Called with ARG == NULL
deletes all breakpoints. */
extern void delete_command (char *arg, int from_tty);
-/* Manage a software single step breakpoint (or two). Insert may be
- called twice before remove is called. */
+/* Create and insert a new software single step breakpoint for the
+ current thread. May be called multiple times; each time will add a
+ new location to the set of potential addresses the next instruction
+ is at. */
extern void insert_single_step_breakpoint (struct gdbarch *,
struct address_space *,
CORE_ADDR);
-extern int single_step_breakpoints_inserted (void);
-extern void remove_single_step_breakpoints (void);
-extern void cancel_single_step_breakpoints (void);
-
-/* Manage manual breakpoints, separate from the normal chain of
- breakpoints. These functions are used in murky target-specific
- ways. Please do not add more uses! */
-extern void *deprecated_insert_raw_breakpoint (struct gdbarch *,
- struct address_space *,
- CORE_ADDR);
-extern int deprecated_remove_raw_breakpoint (struct gdbarch *, void *);
-
/* Check if any hardware watchpoints have triggered, according to the
target. */
int watchpoints_triggered (struct target_waitstatus *);
const gdb_byte *writebuf_org,
ULONGEST memaddr, LONGEST len);
-extern int breakpoints_always_inserted_mode (void);
+/* Return true if breakpoints should be inserted now. That'll be the
+ case if either:
+
+ - the target has global breakpoints.
+
+ - "breakpoint always-inserted" is on, and the target has
+ execution.
+
+ - threads are executing.
+*/
+extern int breakpoints_should_be_inserted_now (void);
/* Called each time new event from target is processed.
Retires previously deleted breakpoint locations that
extern void breakpoint_retire_moribund (void);
/* Set break condition of breakpoint B to EXP. */
-extern void set_breakpoint_condition (struct breakpoint *b, char *exp,
+extern void set_breakpoint_condition (struct breakpoint *b, const char *exp,
int from_tty);
/* Checks if we are catching syscalls or not.
/* Find a tracepoint by parsing a number in the supplied string. */
extern struct tracepoint *
get_tracepoint_by_number (char **arg,
- struct get_number_or_range_state *state,
- int optional_p);
+ struct get_number_or_range_state *state);
/* Return a vector of all tracepoints currently defined. The vector
is newly allocated; the caller should free when done with it. */
/* Attempt to determine architecture of location identified by SAL. */
extern struct gdbarch *get_sal_arch (struct symtab_and_line sal);
-extern void handle_solib_event (void);
+extern void breakpoint_free_objfile (struct objfile *objfile);
+
+extern char *ep_parse_optional_if_clause (char **arg);
#endif /* !defined (BREAKPOINT_H) */