/* Branch trace support for GDB, the GNU debugger.
- Copyright (C) 2013-2015 Free Software Foundation, Inc.
+ Copyright (C) 2013-2017 Free Software Foundation, Inc.
Contributed by Intel Corp. <markus.t.metzger@intel.com>.
list of sequential control-flow blocks, one such list per thread. */
#include "btrace-common.h"
+#include "target/waitstatus.h" /* For enum target_stop_reason. */
+#include "common/enum-flags.h"
+
+#if defined (HAVE_LIBIPT)
+# include <intel-pt.h>
+#endif
struct thread_info;
struct btrace_function;
+/* A coarse instruction classification. */
+enum btrace_insn_class
+{
+ /* The instruction is something not listed below. */
+ BTRACE_INSN_OTHER,
+
+ /* The instruction is a function call. */
+ BTRACE_INSN_CALL,
+
+ /* The instruction is a function return. */
+ BTRACE_INSN_RETURN,
+
+ /* The instruction is an unconditional jump. */
+ BTRACE_INSN_JUMP
+};
+
+/* Instruction flags. */
+enum btrace_insn_flag
+{
+ /* The instruction has been executed speculatively. */
+ BTRACE_INSN_FLAG_SPECULATIVE = (1 << 0)
+};
+DEF_ENUM_FLAGS_TYPE (enum btrace_insn_flag, btrace_insn_flags);
+
/* A branch trace instruction.
This represents a single instruction in a branch trace. */
{
/* The address of this instruction. */
CORE_ADDR pc;
+
+ /* The size of this instruction in bytes. */
+ gdb_byte size;
+
+ /* The instruction class of this instruction. */
+ enum btrace_insn_class iclass;
+
+ /* A bit vector of BTRACE_INSN_FLAGS. */
+ btrace_insn_flags flags;
};
/* A vector of branch trace instructions. */
if bfun_up_links_to_ret is clear. */
BFUN_UP_LINKS_TO_TAILCALL = (1 << 1)
};
+DEF_ENUM_FLAGS_TYPE (enum btrace_function_flag, btrace_function_flags);
+
+/* Decode errors for the BTS recording format. */
+enum btrace_bts_error
+{
+ /* The instruction trace overflowed the end of the trace block. */
+ BDE_BTS_OVERFLOW = 1,
+
+ /* The instruction size could not be determined. */
+ BDE_BTS_INSN_SIZE
+};
+
+/* Decode errors for the Intel Processor Trace recording format. */
+enum btrace_pt_error
+{
+ /* The user cancelled trace processing. */
+ BDE_PT_USER_QUIT = 1,
+
+ /* Tracing was temporarily disabled. */
+ BDE_PT_DISABLED,
+
+ /* Trace recording overflowed. */
+ BDE_PT_OVERFLOW
+
+ /* Negative numbers are used by the decoder library. */
+};
/* A branch trace function segment.
This represents a function segment in a branch trace, i.e. a consecutive
number of instructions belonging to the same function.
- We do not allow function segments without any instructions. */
+ In case of decode errors, we add an empty function segment to indicate
+ the gap in the trace.
+
+ We do not allow function segments without instructions otherwise. */
struct btrace_function
{
/* The full and minimal symbol for the function. Both may be NULL. */
struct btrace_function *up;
/* The instructions in this function segment.
- The instruction vector will never be empty. */
+ The instruction vector will be empty if the function segment
+ represents a decode error. */
VEC (btrace_insn_s) *insn;
+ /* The error code of a decode error that led to a gap.
+ Must be zero unless INSN is empty; non-zero otherwise. */
+ int errcode;
+
/* The instruction number offset for the first instruction in this
- function segment. */
+ function segment.
+ If INSN is empty this is the insn_offset of the succeding function
+ segment in control-flow order. */
unsigned int insn_offset;
- /* The function number in control-flow order. */
+ /* The function number in control-flow order.
+ If INSN is empty indicating a gap in the trace due to a decode error,
+ we still count the gap as a function. */
unsigned int number;
/* The function level in a back trace across the entire branch trace.
a fixup to normalize function levels so the smallest level is zero. */
int level;
- /* The source line range of this function segment (both inclusive). */
- int lbegin, lend;
-
/* A bit-vector of btrace_function_flag. */
- enum btrace_function_flag flags;
+ btrace_function_flags flags;
};
+typedef struct btrace_function *btrace_fun_p;
+DEF_VEC_P (btrace_fun_p);
+
/* A branch trace instruction iterator. */
struct btrace_insn_iterator
{
BTHR_RCONT = (1 << 3),
/* The thread is to be moved. */
- BTHR_MOVE = (BTHR_STEP | BTHR_RSTEP | BTHR_CONT | BTHR_RCONT)
+ BTHR_MOVE = (BTHR_STEP | BTHR_RSTEP | BTHR_CONT | BTHR_RCONT),
+
+ /* The thread is to be stopped. */
+ BTHR_STOP = (1 << 4)
+};
+DEF_ENUM_FLAGS_TYPE (enum btrace_thread_flag, btrace_thread_flags);
+
+#if defined (HAVE_LIBIPT)
+/* A packet. */
+struct btrace_pt_packet
+{
+ /* The offset in the trace stream. */
+ uint64_t offset;
+
+ /* The decode error code. */
+ enum pt_error_code errcode;
+
+ /* The decoded packet. Only valid if ERRCODE == pte_ok. */
+ struct pt_packet packet;
+};
+
+/* Define functions operating on a vector of packets. */
+typedef struct btrace_pt_packet btrace_pt_packet_s;
+DEF_VEC_O (btrace_pt_packet_s);
+#endif /* defined (HAVE_LIBIPT) */
+
+/* Branch trace iteration state for "maintenance btrace packet-history". */
+struct btrace_maint_packet_history
+{
+ /* The branch trace packet range from BEGIN (inclusive) to
+ END (exclusive) that has been covered last time. */
+ unsigned int begin;
+ unsigned int end;
+};
+
+/* Branch trace maintenance information per thread.
+
+ This information is used by "maintenance btrace" commands. */
+struct btrace_maint_info
+{
+ /* Most information is format-specific.
+ The format can be found in the BTRACE.DATA.FORMAT field of each thread. */
+ union
+ {
+ /* BTRACE.DATA.FORMAT == BTRACE_FORMAT_BTS */
+ struct
+ {
+ /* The packet history iterator.
+ We are iterating over BTRACE.DATA.FORMAT.VARIANT.BTS.BLOCKS. */
+ struct btrace_maint_packet_history packet_history;
+ } bts;
+
+#if defined (HAVE_LIBIPT)
+ /* BTRACE.DATA.FORMAT == BTRACE_FORMAT_PT */
+ struct
+ {
+ /* A vector of decoded packets. */
+ VEC (btrace_pt_packet_s) *packets;
+
+ /* The packet history iterator.
+ We are iterating over the above PACKETS vector. */
+ struct btrace_maint_packet_history packet_history;
+ } pt;
+#endif /* defined (HAVE_LIBIPT) */
+ } variant;
};
/* Branch trace information per thread.
the underlying architecture. */
struct btrace_target_info *target;
+ /* The raw branch trace data for the below branch trace. */
+ struct btrace_data data;
+
/* The current branch trace for this thread (both inclusive).
The last instruction of END is the current instruction, which is not
struct btrace_function *begin;
struct btrace_function *end;
+ /* Vector of pointer to decoded function segments. These are in execution
+ order with the first element == BEGIN and the last element == END. */
+ VEC (btrace_fun_p) *functions;
+
/* The function level offset. When added to each function's LEVEL,
this normalizes the function levels such that the smallest level
becomes zero. */
int level;
+ /* The number of gaps in the trace. */
+ unsigned int ngaps;
+
/* A bit-vector of btrace_thread_flag. */
- enum btrace_thread_flag flags;
+ btrace_thread_flags flags;
/* The instruction history iterator. */
struct btrace_insn_history *insn_history;
/* The function call history iterator. */
struct btrace_call_history *call_history;
- /* The current replay position. NULL if not replaying. */
+ /* The current replay position. NULL if not replaying.
+ Gaps are skipped during replay, so REPLAY always points to a valid
+ instruction. */
struct btrace_insn_iterator *replay;
+
+ /* Why the thread stopped, if we need to track it. */
+ enum target_stop_reason stop_reason;
+
+ /* Maintenance information. */
+ struct btrace_maint_info maint;
};
/* Enable branch tracing for a thread. */
-extern void btrace_enable (struct thread_info *tp);
+extern void btrace_enable (struct thread_info *tp,
+ const struct btrace_config *conf);
+
+/* Get the branch trace configuration for a thread.
+ Return NULL if branch tracing is not enabled for that thread. */
+extern const struct btrace_config *
+ btrace_conf (const struct btrace_thread_info *);
/* Disable branch tracing for a thread.
This will also delete the current branch trace data. */
target_teardown_btrace instead of target_disable_btrace. */
extern void btrace_teardown (struct thread_info *);
+/* Return a human readable error string for the given ERRCODE in FORMAT.
+ The pointer will never be NULL and must not be freed. */
+
+extern const char *btrace_decode_error (enum btrace_format format, int errcode);
+
/* Fetch the branch trace for a single thread. */
extern void btrace_fetch (struct thread_info *);
/* Parse a branch trace xml document XML into DATA. */
extern void parse_xml_btrace (struct btrace_data *data, const char *xml);
+/* Parse a branch trace configuration xml document XML into CONF. */
+extern void parse_xml_btrace_conf (struct btrace_config *conf, const char *xml);
+
/* Dereference a branch trace instruction iterator. Return a pointer to the
- instruction the iterator points to. */
+ instruction the iterator points to.
+ May return NULL if the iterator points to a gap in the trace. */
extern const struct btrace_insn *
btrace_insn_get (const struct btrace_insn_iterator *);
+/* Return the error code for a branch trace instruction iterator. Returns zero
+ if there is no error, i.e. the instruction is valid. */
+extern int btrace_insn_get_error (const struct btrace_insn_iterator *);
+
/* Return the instruction number for a branch trace iterator.
- Returns one past the maximum instruction number for the end iterator.
- Returns zero if the iterator does not point to a valid instruction. */
+ Returns one past the maximum instruction number for the end iterator. */
extern unsigned int btrace_insn_number (const struct btrace_insn_iterator *);
/* Initialize a branch trace instruction iterator to point to the begin/end of
extern int btrace_insn_cmp (const struct btrace_insn_iterator *lhs,
const struct btrace_insn_iterator *rhs);
-/* Find an instruction in the function branch trace by its number.
+/* Find an instruction or gap in the function branch trace by its number.
If the instruction is found, initialize the branch trace instruction
iterator to point to this instruction and return non-zero.
Return zero otherwise. */