/* Parameters for execution on a H8/500 series machine.
- Copyright (C) 1993 Free Software Foundation, Inc.
+ Copyright (C) 1993, 1995 Free Software Foundation, Inc.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
/* Contributed by Steve Chamberlain sac@cygnus.com */
#define GDB_TARGET_IS_H8500
-#define IEEE_FLOAT 1
+#define IEEE_FLOAT (1)
/* Define the bit, byte, and word ordering of the machine. */
#define TARGET_BYTE_ORDER BIG_ENDIAN
-#undef TARGET_INT_BIT
+/* Define the sizes of integers and pointers. */
+
#define TARGET_INT_BIT 16
-#undef TARGET_PTR_BIT
-#define TARGET_PTR_BIT (minimum_mode ? 16 : 32)
+#define TARGET_LONG_BIT 32
+#define TARGET_PTR_BIT (minimum_mode ? 16 : 32)
/* Offset from address of function to start of its code.
Zero on most machines. */
/* Advance PC across any function entry prologue instructions
to reach some "real" code. */
-#define SKIP_PROLOGUE(ip) {(ip) = h8500_skip_prologue(ip);}
-extern CORE_ADDR h8500_skip_prologue ();
-
+#define SKIP_PROLOGUE(ip) (h8500_skip_prologue (ip))
+extern CORE_ADDR h8500_skip_prologue (CORE_ADDR);
/* Immediately after a function call, return the saved pc.
Can't always go through the frames for this because on some machines
the new frame is not set up until the new function executes
some instructions. */
-#define SAVED_PC_AFTER_CALL(frame) saved_pc_after_call(frame)
-
+#define SAVED_PC_AFTER_CALL(frame) saved_pc_after_call()
+extern CORE_ADDR saved_pc_after_call (void);
/* Stack grows downward. */
-#define INNER_THAN <
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
/* Illegal instruction - used by the simulator for breakpoint
detection */
-#define BREAKPOINT {0x0b}
+#define BREAKPOINT {0x0b}
/* If your kernel resets the pc after the trap happens you may need to
define this before including this file. */
#define DECR_PC_AFTER_BREAK 0
-
-/* Nonzero if instruction at PC is a return instruction. */
-
-#define ABOUT_TO_RETURN(pc) about_to_return(pc)
-
-/* Return 1 if P points to an invalid floating point value. */
-
-#define INVALID_FLOAT(p, len) 0 /* Just a first guess; not checked */
-
/* Say how long registers are. */
#define REGISTER_TYPE unsigned long
/* Say how much memory is needed to store a copy of the register set */
-#define REGISTER_BYTES (24)
+#define REGISTER_BYTES (NUM_REGS * 4)
/* Index within `registers' of the first byte of the space for
register N. */
-int regoff[];
-#define REGISTER_BYTE(N) (regoff[N])
+#define REGISTER_BYTE(N) ((N)*4)
/* Number of bytes of storage in the actual machine representation
for register N. */
#define REGISTER_RAW_SIZE(N) h8500_register_size(N)
-int h8500_register_size PARAMS ((int regno));
+extern int h8500_register_size (int regno);
+
+#define REGISTER_SIZE 4
#define REGISTER_VIRTUAL_SIZE(N) h8500_register_size(N)
#define MAX_REGISTER_VIRTUAL_SIZE 4
-/* Nonzero if register N requires conversion
- from raw format to virtual format. */
-
-#define REGISTER_CONVERTIBLE(N) (0)
-
-/* Convert data from raw format for register REGNUM
- to virtual format for register REGNUM. */
-
-#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \
-{ memcpy ((TO), (FROM), 4); }
-
-/* Convert data from virtual format for register REGNUM
- to raw format for register REGNUM. */
-
-#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) \
-{ memcpy ((TO), (FROM), 4); }
-
/* Return the GDB type object for the "standard" data type
of data in register N. */
#define REGISTER_VIRTUAL_TYPE(N) h8500_register_virtual_type(N)
-struct type *h8500_register_virtual_type PARAMS ((int regno));
+extern struct type *h8500_register_virtual_type (int regno);
/* Initializer for an array of names of registers.
Entries beyond the first NUM_REGS are ignored. */
#define REGISTER_NAMES \
- {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
- "ccr","pc", \
- "cp","dp","ep","tp" }
-
-/* Register numbers of various important registers.
- Note that some of these values are "real" register numbers,
- and correspond to the general registers of the machine,
- and some are "phony" register numbers which are too large
- to be actual register numbers as far as the user is concerned
- but do serve to get the desired values when passed to read_register. */
+ { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
+ "pr0","pr1","pr2","pr3","pr4","pr5","pr6","pr7", \
+ "cp", "dp", "ep", "tp", "sr", "pc"}
+/* Register numbers of various important registers. Note that some of
+ these values are "real" register numbers, and correspond to the
+ general registers of the machine, and some are "phony" register
+ numbers which are too large to be actual register numbers as far as
+ the user is concerned but do serve to get the desired values when
+ passed to read_register. */
#define R0_REGNUM 0
#define R1_REGNUM 1
#define R6_REGNUM 6
#define R7_REGNUM 7
-#define SP_REGNUM R7_REGNUM /* Contains address of top of stack */
-#define FP_REGNUM R6_REGNUM /* Contains address of executing stack frame */
+#define PR0_REGNUM 8
+#define PR1_REGNUM 9
+#define PR2_REGNUM 10
+#define PR3_REGNUM 11
+#define PR4_REGNUM 12
+#define PR5_REGNUM 13
+#define PR6_REGNUM 14
+#define PR7_REGNUM 15
-#define CCR_REGNUM 8 /* Contains processor status */
-#define PC_REGNUM 9 /* Contains program counter */
+#define SEG_C_REGNUM 16 /* Segment registers */
+#define SEG_D_REGNUM 17
+#define SEG_E_REGNUM 18
+#define SEG_T_REGNUM 19
-#define SEG_C_REGNUM 10 /* Segment registers */
-#define SEG_D_REGNUM 11
-#define SEG_E_REGNUM 12
-#define SEG_T_REGNUM 13
+#define CCR_REGNUM 20 /* Contains processor status */
+#define PC_REGNUM 21 /* Contains program counter */
-#define NUM_REGS 14
+#define NUM_REGS 22
-#define PTR_SIZE (minimum_mode ? 2: 4)
+#define SP_REGNUM PR7_REGNUM /* Contains address of top of stack */
+#define FP_REGNUM PR6_REGNUM /* Contains address of executing stack frame */
+
+#define PTR_SIZE (minimum_mode ? 2 : 4)
#define PTR_MASK (minimum_mode ? 0x0000ffff : 0x00ffffff)
/* Store the address of the place in which to copy the structure the
subroutine will return. This is called from call_function. */
/*#define STORE_STRUCT_RETURN(ADDR, SP) \
- { write_register (0, (ADDR)); abort(); }*/
+ { write_register (0, (ADDR)); internal_error (__FILE__, __LINE__, "failed internal consistency check"); } */
/* Extract from an array REGBUF containing the (raw) register state
a function return value of type TYPE, and copy that, in virtual format,
into VALBUF. */
#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
- bcopy ((char *)(REGBUF), VALBUF, TYPE_LENGTH(TYPE))
-
+ memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE))
/* Write into appropriate registers a function return value
- of type TYPE, given in virtual format. Assumes floats are passed
- in d0/d1. */
-
+ of type TYPE, given in virtual format. */
#define STORE_RETURN_VALUE(TYPE,VALBUF) \
write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
-
/* Extract from an array REGBUF containing the (raw) register state
the address in which a function should return its structure value,
as a CORE_ADDR (or an expression that can be used as one). */
/* A macro that tells us whether the function invocation represented
by FI does not have a frame on the stack associated with it. If it
does not, FRAMELESS is set to 1, else 0. */
-#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
- (FRAMELESS) = frameless_look_for_prologue(FI)
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI) \
+ (frameless_look_for_prologue (FI))
/* Any function with a frame looks like this
SECOND ARG
SAVED FP <-FP POINTS HERE
LOCALS0
LOCALS1 <-SP POINTS HERE
-
- */
-CORE_ADDR h8500_frame_chain (/* FRAME thisframe */);
+ */
-#define INIT_EXTRA_FRAME_INFO(fromleaf, fci) \
- (fci)->frame |= read_register(SEG_T_REGNUM) << 16;
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fci) ;
+/* (fci)->frame |= read_register(SEG_T_REGNUM) << 16; */
#define FRAME_CHAIN(FRAME) h8500_frame_chain(FRAME)
+struct frame_info;
+extern CORE_ADDR h8500_frame_chain (struct frame_info *);
#define FRAME_SAVED_PC(FRAME) frame_saved_pc(FRAME)
+extern CORE_ADDR frame_saved_pc (struct frame_info *frame);
-#define FRAME_ARGS_ADDRESS(fi) frame_args_address(fi)
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
-#define FRAME_LOCALS_ADDRESS(fi) frame_locals_address(fi);
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
/* Set VAL to the number of args passed to frame described by FI.
Can set VAL to -1, meaning no way to tell. */
/* We can't tell how many args there are
now that the C compiler delays popping them. */
-#define FRAME_NUM_ARGS(val,fi) (val = -1)
+#define FRAME_NUM_ARGS(fi) (-1)
/* Return number of bytes at start of arglist that are not really args. */
#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
frame_find_saved_regs(frame_info, &(frame_saved_regs))
+struct frame_saved_regs;
+extern void frame_find_saved_regs (struct frame_info *frame_info,
+ struct frame_saved_regs *frame_saved_regs);
\f
-/* Push an empty stack frame, to record the current PC, etc. */
-
-/*#define PUSH_DUMMY_FRAME { h8300_push_dummy_frame (); }*/
-
/* Discard from the stack the innermost frame, restoring all registers. */
-#define POP_FRAME { h8300_pop_frame (); }
+#define POP_FRAME { h8500_pop_frame (); }
+extern void h8500_pop_frame (void);
#define SHORT_INT_MAX 32767
#define SHORT_INT_MIN -32768
-
-
-#define BEFORE_MAIN_LOOP_HOOK \
- hms_before_main_loop();
-
-
-#define NAMES_HAVE_UNDERSCORE
-
typedef unsigned short INSN_WORD;
-#define ADDR_BITS_REMOVE(addr) ((addr) & 0xffffff)
-#define ADDR_BITS_SET(addr) (((addr)))
+extern CORE_ADDR h8500_addr_bits_remove (CORE_ADDR);
+#define ADDR_BITS_REMOVE(addr) h8500_addr_bits_remove (addr)
#define read_memory_short(x) (read_memory_integer(x,2) & 0xffff)
-#define DONT_USE_REMOTE
-
#define PRINT_REGISTER_HOOK(regno) print_register_hook(regno)
+extern void print_register_hook (int);
-int minimum_mode;
+extern int minimum_mode;
#define CALL_DUMMY_LENGTH 10
/* Fake variables to make it easy to use 24 bit register pointers */
-int h8500_is_trapped_internalvar PARAMS ((char *name));
#define IS_TRAPPED_INTERNALVAR h8500_is_trapped_internalvar
+extern int h8500_is_trapped_internalvar (char *name);
-PTR h8500_value_of_trapped_internalvar (/* struct internalvar *var */);
#define VALUE_OF_TRAPPED_INTERNALVAR h8500_value_of_trapped_internalvar
+extern struct value *h8500_value_of_trapped_internalvar ( /* struct internalvar *var */ );
-void h8500_set_trapped_internalvar (/* struct internalvar *var, value newval, int bitpos, int bitsize, int offset */);
#define SET_TRAPPED_INTERNALVAR h8500_set_trapped_internalvar
+extern void h8500_set_trapped_internalvar ( /* struct internalvar *var, value newval, int bitpos, int bitsize, int offset */ );
+
+extern CORE_ADDR h8500_read_sp (void);
+extern void h8500_write_sp (CORE_ADDR);
+
+extern CORE_ADDR h8500_read_fp (void);
+extern void h8500_write_fp (CORE_ADDR);
+
+extern CORE_ADDR h8500_read_pc (int);
+extern void h8500_write_pc (CORE_ADDR, int);
+
+#define TARGET_READ_SP() h8500_read_sp()
+#define TARGET_WRITE_SP(x) h8500_write_sp(x)
+
+#define TARGET_READ_PC(pid) h8500_read_pc(pid)
+#define TARGET_WRITE_PC(x,pid) h8500_write_pc(x,pid)
+
+#define TARGET_READ_FP() h8500_read_fp()
+#define TARGET_WRITE_FP(x) h8500_write_fp(x)
projects / deliverable / binutils-gdb.git / blobdiff