/* Parameters for execution on a 68000 series machine.
- Copyright 1986, 1987, 1989, 1990, 1992 Free Software Foundation, Inc.
+ Copyright 1986, 1987, 1989, 1990, 1992, 1993, 1994, 1995, 1996, 1998,
+ 1999, 2000, 2003 Free Software Foundation, Inc.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
-/* Generic 68000 stuff, to be included by other tm-*.h files.
- Define HAVE_68881 if that is the case. */
+#define GDB_MULTI_ARCH GDB_MULTI_ARCH_PARTIAL
-#if defined (HAVE_68881)
-#define IEEE_FLOAT 1
-#endif
-
-/* Define the bit, byte, and word ordering of the machine. */
-#define TARGET_BYTE_ORDER BIG_ENDIAN
-
-/* Offset from address of function to start of its code.
- Zero on most machines. */
-
-#define FUNCTION_START_OFFSET 0
-
-/* Advance PC across any function entry prologue instructions
- to reach some "real" code. */
-
-#if !defined(SKIP_PROLOGUE)
-#define SKIP_PROLOGUE(ip) {(ip) = m68k_skip_prologue(ip);}
-extern CORE_ADDR m68k_skip_prologue PARAMS ((CORE_ADDR ip));
-#endif
-
-/* Immediately after a function call, return the saved pc.
- Can't always go through the frames for this because on some machines
- the new frame is not set up until the new function executes
- some instructions. */
-
-#define SAVED_PC_AFTER_CALL(frame) \
-read_memory_integer (read_register (SP_REGNUM), 4)
-
-/* Stack grows downward. */
-
-#define INNER_THAN <
-
-/* Sequence of bytes for breakpoint instruction.
- This is a TRAP instruction. The last 4 bits (0xf below) is the
- vector. Systems which don't use 0xf should define BPT_VECTOR
- themselves before including this file. */
-
-#if !defined (BPT_VECTOR)
-#define BPT_VECTOR 0xf
-#endif
-
-#if !defined (BREAKPOINT)
-#define BREAKPOINT {0x4e, (0x40 | BPT_VECTOR)}
-#endif
-
-/* If your kernel resets the pc after the trap happens you may need to
- define this before including this file. */
-
-#if !defined (DECR_PC_AFTER_BREAK)
-#define DECR_PC_AFTER_BREAK 2
-#endif
-
-/* Nonzero if instruction at PC is a return instruction. */
-/* Allow any of the return instructions, including a trapv and a return
- from interupt. */
-
-#define ABOUT_TO_RETURN(pc) ((read_memory_integer (pc, 2) & ~0x3) == 0x4e74)
-
-/* Return 1 if P points to an invalid floating point value. */
-
-#define INVALID_FLOAT(p, len) 0 /* Just a first guess; not checked */
-
-/* Say how long registers are. */
-
-#define REGISTER_TYPE long
-
-#if defined (HAVE_68881)
-# if defined (GDB_TARGET_IS_SUN3)
- /* Sun3 status includes fpflags, which shows whether the FPU has been used
- by the process, and whether the FPU was done with an instruction or
- was interrupted in the middle of a long instruction. See
- <machine/reg.h>. */
- /* a&d, pc,sr, fp, fpstat, fpflags */
-# define NUM_REGS 31
-# define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4 + 4)
-# else /* Not sun3. */
-# define NUM_REGS 29
-# define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4)
-# endif /* Not sun3. */
-#else /* No 68881. */
-# define NUM_REGS 18
-# define REGISTER_BYTES (16*4 + 8)
-#endif /* No 68881. */
-
-/* Index within `registers' of the first byte of the space for
- register N. */
-
-#if defined (HAVE_68881)
-#define REGISTER_BYTE(N) \
- ((N) >= FPC_REGNUM ? (((N) - FPC_REGNUM) * 4) + 168 \
- : (N) >= FP0_REGNUM ? (((N) - FP0_REGNUM) * 12) + 72 \
- : (N) * 4)
-
-/* Number of bytes of storage in the actual machine representation
- for register N. On the 68000, all regs are 4 bytes
- except the floating point regs which are 12 bytes. */
-/* Note that the unsigned cast here forces the result of the
- subtraction to very high positive values if N < FP0_REGNUM */
-
-#define REGISTER_RAW_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 12 : 4)
-
-/* Number of bytes of storage in the program's representation
- for register N. On the 68000, all regs are 4 bytes
- except the floating point regs which are 8-byte doubles. */
-
-#define REGISTER_VIRTUAL_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 8 : 4)
-
-/* Largest value REGISTER_RAW_SIZE can have. */
-
-#define MAX_REGISTER_RAW_SIZE 12
-
-/* Largest value REGISTER_VIRTUAL_SIZE can have. */
-
-#define MAX_REGISTER_VIRTUAL_SIZE 8
-
-/* Nonzero if register N requires conversion
- from raw format to virtual format. */
-
-#define REGISTER_CONVERTIBLE(N) (((unsigned)(N) - FP0_REGNUM) < 8)
-
-/* Put the declaration out here because if it's in the macros, PCC
- will complain. */
-extern const struct ext_format ext_format_68881;
-
-/* Convert data from raw format for register REGNUM
- to virtual format for register REGNUM. */
-
-#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \
-{ \
- if ((REGNUM) >= FP0_REGNUM && (REGNUM) < FPC_REGNUM) \
- ieee_extended_to_double (&ext_format_68881, (FROM), (double *)(TO)); \
- else \
- memcpy ((TO), (FROM), 4); \
-}
-
-/* Convert data from virtual format for register REGNUM
- to raw format for register REGNUM. */
-
-#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) \
-{ \
- if ((REGNUM) >= FP0_REGNUM && (REGNUM) < FPC_REGNUM) \
- double_to_ieee_extended (&ext_format_68881, (double *)(FROM), (TO)); \
- else \
- memcpy ((TO), (FROM), 4); \
-}
-
-/* Return the GDB type object for the "standard" data type
- of data in register N. */
-/* Note, for registers which contain addresses return
- pointer to void, not pointer to char, because we don't
- want to attempt to print the string after printing the address. */
-#define REGISTER_VIRTUAL_TYPE(N) \
- (((unsigned)(N) - FP0_REGNUM) < 8 ? builtin_type_double : \
- (N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM ? \
- lookup_pointer_type (builtin_type_void) : builtin_type_int)
-
-#else /* no 68881. */
-/* Index within `registers' of the first byte of the space for
- register N. */
-
-#define REGISTER_BYTE(N) ((N) * 4)
-
-/* Number of bytes of storage in the actual machine representation
- for register N. On the 68000, all regs are 4 bytes. */
-
-#define REGISTER_RAW_SIZE(N) 4
-
-/* Number of bytes of storage in the program's representation
- for register N. On the 68000, all regs are 4 bytes. */
-
-#define REGISTER_VIRTUAL_SIZE(N) 4
-
-/* Largest value REGISTER_RAW_SIZE can have. */
-
-#define MAX_REGISTER_RAW_SIZE 4
-
-/* Largest value REGISTER_VIRTUAL_SIZE can have. */
-
-#define MAX_REGISTER_VIRTUAL_SIZE 4
-
-/* Nonzero if register N requires conversion
- from raw format to virtual format. */
-
-#define REGISTER_CONVERTIBLE(N) 0
-
-/* Convert data from raw format for register REGNUM
- to virtual format for register REGNUM. */
-
-#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) memcpy ((TO), (FROM), 4);
-
-/* Convert data from virtual format for register REGNUM
- to raw format for register REGNUM. */
-
-#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) memcpy ((TO), (FROM), 4);
-
-/* Return the GDB type object for the "standard" data type
- of data in register N. */
-
-#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int
-
-#endif /* No 68881. */
-
-/* Initializer for an array of names of registers.
- Entries beyond the first NUM_REGS are ignored. */
-
-#define REGISTER_NAMES \
- {"d0", "d1", "d2", "d3", "d4", "d5", "d6", "d7", \
- "a0", "a1", "a2", "a3", "a4", "a5", "fp", "sp", \
- "ps", "pc", \
- "fp0", "fp1", "fp2", "fp3", "fp4", "fp5", "fp6", "fp7", \
- "fpcontrol", "fpstatus", "fpiaddr", "fpcode", "fpflags" }
-
-/* Register numbers of various important registers.
- Note that some of these values are "real" register numbers,
- and correspond to the general registers of the machine,
- and some are "phony" register numbers which are too large
- to be actual register numbers as far as the user is concerned
- but do serve to get the desired values when passed to read_register. */
-
-#define A1_REGNUM 9
-#define FP_REGNUM 14 /* Contains address of executing stack frame */
-#define SP_REGNUM 15 /* Contains address of top of stack */
-#define PS_REGNUM 16 /* Contains processor status */
-#define PC_REGNUM 17 /* Contains program counter */
-#if defined (HAVE_68881)
-#define FP0_REGNUM 18 /* Floating point register 0 */
-#define FPC_REGNUM 26 /* 68881 control register */
-#define FPS_REGNUM 27 /* 68881 status register */
-#define FPI_REGNUM 28 /* 68881 iaddr register */
-#endif /* 68881. */
-
-/* Store the address of the place in which to copy the structure the
- subroutine will return. This is called from call_function. */
-
-#define STORE_STRUCT_RETURN(ADDR, SP) \
- { write_register (A1_REGNUM, (ADDR)); }
-
-/* Extract from an array REGBUF containing the (raw) register state
- a function return value of type TYPE, and copy that, in virtual format,
- into VALBUF. This is assuming that floating point values are returned
- as doubles in d0/d1. */
-
-#if !defined (EXTRACT_RETURN_VALUE)
-#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
- memcpy ((VALBUF), \
- (char *)(REGBUF) + \
- (TYPE_LENGTH(TYPE) >= 4 ? 0 : 4 - TYPE_LENGTH(TYPE)), \
- TYPE_LENGTH(TYPE))
-#endif
-
-/* Write into appropriate registers a function return value
- of type TYPE, given in virtual format. Assumes floats are passed
- in d0/d1. */
-
-#if !defined (STORE_RETURN_VALUE)
-#define STORE_RETURN_VALUE(TYPE,VALBUF) \
- write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
-#endif
-
-/* Extract from an array REGBUF containing the (raw) register state
- the address in which a function should return its structure value,
- as a CORE_ADDR (or an expression that can be used as one). */
-
-#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
-\f
-/* Describe the pointer in each stack frame to the previous stack frame
- (its caller). */
-
-/* FRAME_CHAIN takes a frame's nominal address and produces the frame's
- chain-pointer.
- In the case of the 68000, the frame's nominal address
- is the address of a 4-byte word containing the calling frame's address. */
-
-/* If we are chaining from sigtramp, then manufacture a sigtramp frame
- (which isn't really on the stack. I'm not sure this is right for anything
- but BSD4.3 on an hp300. */
-#define FRAME_CHAIN(thisframe) \
- (thisframe->signal_handler_caller \
- ? thisframe->frame \
- : (!inside_entry_file ((thisframe)->pc) \
- ? read_memory_integer ((thisframe)->frame, 4) \
- : 0))
-
-/* Define other aspects of the stack frame. */
-
-/* A macro that tells us whether the function invocation represented
- by FI does not have a frame on the stack associated with it. If it
- does not, FRAMELESS is set to 1, else 0. */
-#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
- do { \
- if ((FI)->signal_handler_caller) \
- (FRAMELESS) = 0; \
- else \
- (FRAMELESS) = frameless_look_for_prologue(FI); \
- } while (0)
-
-/* This was determined by experimentation on hp300 BSD 4.3. Perhaps
- it corresponds to some offset in /usr/include/sys/user.h or
- something like that. Using some system include file would
- have the advantage of probably being more robust in the face
- of OS upgrades, but the disadvantage of being wrong for
- cross-debugging. */
-
-#define SIG_PC_FP_OFFSET 530
-
-#define FRAME_SAVED_PC(FRAME) \
- (((FRAME)->signal_handler_caller \
- ? ((FRAME)->next \
- ? read_memory_integer ((FRAME)->next->frame + SIG_PC_FP_OFFSET, 4) \
- : read_memory_integer (read_register (SP_REGNUM) \
- + SIG_PC_FP_OFFSET - 8, 4) \
- ) \
- : read_memory_integer ((FRAME)->frame + 4, 4)) \
- )
-
-#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
-
-#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
-
-/* Set VAL to the number of args passed to frame described by FI.
- Can set VAL to -1, meaning no way to tell. */
-
-/* We can't tell how many args there are
- now that the C compiler delays popping them. */
-#if !defined (FRAME_NUM_ARGS)
-#define FRAME_NUM_ARGS(val,fi) (val = -1)
-#endif
-
-/* Return number of bytes at start of arglist that are not really args. */
-
-#define FRAME_ARGS_SKIP 8
-
-/* Put here the code to store, into a struct frame_saved_regs,
- the addresses of the saved registers of frame described by FRAME_INFO.
- This includes special registers such as pc and fp saved in special
- ways in the stack frame. sp is even more special:
- the address we return for it IS the sp for the next frame. */
-
-#if !defined (FRAME_FIND_SAVED_REGS)
-#if defined (HAVE_68881)
-#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
-{ register int regnum; \
- register int regmask; \
- register CORE_ADDR next_addr; \
- register CORE_ADDR pc; \
- int nextinsn; \
- bzero (&frame_saved_regs, sizeof frame_saved_regs); \
- if ((frame_info)->pc >= (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM*4 - 8*12 - 4 \
- && (frame_info)->pc <= (frame_info)->frame) \
- { next_addr = (frame_info)->frame; \
- pc = (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM * 4 - 8*12 - 4; }\
- else \
- { pc = get_pc_function_start ((frame_info)->pc); \
- /* Verify we have a link a6 instruction next; \
- if not we lose. If we win, find the address above the saved \
- regs using the amount of storage from the link instruction. */\
- if (044016 == read_memory_integer (pc, 2)) \
- next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 4), pc+=4; \
- else if (047126 == read_memory_integer (pc, 2)) \
- next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 2), pc+=2; \
- else goto lose; \
- /* If have an addal #-n, sp next, adjust next_addr. */ \
- if ((0177777 & read_memory_integer (pc, 2)) == 0157774) \
- next_addr += read_memory_integer (pc += 2, 4), pc += 4; \
- } \
- /* next should be a moveml to (sp) or -(sp) or a movl r,-(sp) */ \
- regmask = read_memory_integer (pc + 2, 2); \
- /* But before that can come an fmovem. Check for it. */ \
- nextinsn = 0xffff & read_memory_integer (pc, 2); \
- if (0xf227 == nextinsn \
- && (regmask & 0xff00) == 0xe000) \
- { pc += 4; /* Regmask's low bit is for register fp7, the first pushed */ \
- for (regnum = FP0_REGNUM + 7; regnum >= FP0_REGNUM; regnum--, regmask >>= 1) \
- if (regmask & 1) \
- (frame_saved_regs).regs[regnum] = (next_addr -= 12); \
- regmask = read_memory_integer (pc + 2, 2); } \
- if (0044327 == read_memory_integer (pc, 2)) \
- { pc += 4; /* Regmask's low bit is for register 0, the first written */ \
- for (regnum = 0; regnum < 16; regnum++, regmask >>= 1) \
- if (regmask & 1) \
- (frame_saved_regs).regs[regnum] = (next_addr += 4) - 4; } \
- else if (0044347 == read_memory_integer (pc, 2)) \
- { pc += 4; /* Regmask's low bit is for register 15, the first pushed */ \
- for (regnum = 15; regnum >= 0; regnum--, regmask >>= 1) \
- if (regmask & 1) \
- (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \
- else if (0x2f00 == (0xfff0 & read_memory_integer (pc, 2))) \
- { regnum = 0xf & read_memory_integer (pc, 2); pc += 2; \
- (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \
- /* fmovemx to index of sp may follow. */ \
- regmask = read_memory_integer (pc + 2, 2); \
- nextinsn = 0xffff & read_memory_integer (pc, 2); \
- if (0xf236 == nextinsn \
- && (regmask & 0xff00) == 0xf000) \
- { pc += 10; /* Regmask's low bit is for register fp0, the first written */ \
- for (regnum = FP0_REGNUM + 7; regnum >= FP0_REGNUM; regnum--, regmask >>= 1) \
- if (regmask & 1) \
- (frame_saved_regs).regs[regnum] = (next_addr += 12) - 12; \
- regmask = read_memory_integer (pc + 2, 2); } \
- /* clrw -(sp); movw ccr,-(sp) may follow. */ \
- if (0x426742e7 == read_memory_integer (pc, 4)) \
- (frame_saved_regs).regs[PS_REGNUM] = (next_addr -= 4); \
- lose: ; \
- (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 8; \
- (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame; \
- (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4; \
-}
-#else /* no 68881. */
-#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
-{ register int regnum; \
- register int regmask; \
- register CORE_ADDR next_addr; \
- register CORE_ADDR pc; \
- bzero (&frame_saved_regs, sizeof frame_saved_regs); \
- if ((frame_info)->pc >= (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM*4 - 4 \
- && (frame_info)->pc <= (frame_info)->frame) \
- { next_addr = (frame_info)->frame; \
- pc = (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM * 4 - 4; }\
- else \
- { pc = get_pc_function_start ((frame_info)->pc); \
- /* Verify we have a link a6 instruction next; \
- if not we lose. If we win, find the address above the saved \
- regs using the amount of storage from the link instruction. */\
- if (044016 == read_memory_integer (pc, 2)) \
- next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 4), pc+=4; \
- else if (047126 == read_memory_integer (pc, 2)) \
- next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 2), pc+=2; \
- else goto lose; \
- /* If have an addal #-n, sp next, adjust next_addr. */ \
- if ((0177777 & read_memory_integer (pc, 2)) == 0157774) \
- next_addr += read_memory_integer (pc += 2, 4), pc += 4; \
- } \
- /* next should be a moveml to (sp) or -(sp) or a movl r,-(sp) */ \
- regmask = read_memory_integer (pc + 2, 2); \
- if (0044327 == read_memory_integer (pc, 2)) \
- { pc += 4; /* Regmask's low bit is for register 0, the first written */ \
- for (regnum = 0; regnum < 16; regnum++, regmask >>= 1) \
- if (regmask & 1) \
- (frame_saved_regs).regs[regnum] = (next_addr += 4) - 4; } \
- else if (0044347 == read_memory_integer (pc, 2)) \
- { pc += 4; /* Regmask's low bit is for register 15, the first pushed */ \
- for (regnum = 15; regnum >= 0; regnum--, regmask >>= 1) \
- if (regmask & 1) \
- (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \
- else if (0x2f00 == (0xfff0 & read_memory_integer (pc, 2))) \
- { regnum = 0xf & read_memory_integer (pc, 2); pc += 2; \
- (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \
- /* clrw -(sp); movw ccr,-(sp) may follow. */ \
- if (0x426742e7 == read_memory_integer (pc, 4)) \
- (frame_saved_regs).regs[PS_REGNUM] = (next_addr -= 4); \
- lose: ; \
- (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 8; \
- (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame; \
- (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4; \
-}
-#endif /* no 68881. */
-#endif /* no FIND_FRAME_SAVED_REGS. */
-
-\f
-/* Things needed for making the inferior call functions.
- It seems like every m68k based machine has almost identical definitions
- in the individual machine's configuration files. Most other cpu types
- (mips, i386, etc) have routines in their *-tdep.c files to handle this
- for most configurations. The m68k family should be able to do this as
- well. These macros can still be overridden when necessary. */
-
-/* The CALL_DUMMY macro is the sequence of instructions, as disassembled
- by gdb itself:
-
- fmovemx fp0-fp7,sp@- 0xf227 0xe0ff
- moveml d0-a5,sp@- 0x48e7 0xfffc
- clrw sp@- 0x4267
- movew ccr,sp@- 0x42e7
-
- /..* The arguments are pushed at this point by GDB;
- no code is needed in the dummy for this.
- The CALL_DUMMY_START_OFFSET gives the position of
- the following jsr instruction. *../
-
- jsr @#0x32323232 0x4eb9 0x3232 0x3232
- addal #0x69696969,sp 0xdffc 0x6969 0x6969
- trap #<your BPT_VECTOR number here> 0x4e4?
- nop 0x4e71
-
- Note this is CALL_DUMMY_LENGTH bytes (28 for the above example).
- We actually start executing at the jsr, since the pushing of the
- registers is done by PUSH_DUMMY_FRAME. If this were real code,
- the arguments for the function called by the jsr would be pushed
- between the moveml and the jsr, and we could allow it to execute through.
- But the arguments have to be pushed by GDB after the PUSH_DUMMY_FRAME is
- done, and we cannot allow the moveml to push the registers again lest
- they be taken for the arguments. */
-
-#if defined (HAVE_68881)
-
-#define CALL_DUMMY {0xf227e0ff, 0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, (0x4e404e71 | (BPT_VECTOR << 16))}
-#define CALL_DUMMY_LENGTH 28 /* Size of CALL_DUMMY */
-#define CALL_DUMMY_START_OFFSET 12 /* Offset to jsr instruction*/
-
-#else
-
-#define CALL_DUMMY {0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, (0x4e404e71 | (BPT_VECTOR << 16))}
-#define CALL_DUMMY_LENGTH 24 /* Size of CALL_DUMMY */
-#define CALL_DUMMY_START_OFFSET 8 /* Offset to jsr instruction*/
-
-#endif /* HAVE_68881 */
-
-/* Insert the specified number of args and function address
- into a call sequence of the above form stored at DUMMYNAME.
- We use the BFD routines to store a big-endian value of known size. */
-
-#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
-{ _do_putb32 (fun, (char *) dummyname + CALL_DUMMY_START_OFFSET + 2); \
- _do_putb32 (nargs*4, (char *) dummyname + CALL_DUMMY_START_OFFSET + 8); }
-
-/* Push an empty stack frame, to record the current PC, etc. */
-
-#define PUSH_DUMMY_FRAME { m68k_push_dummy_frame (); }
-
-extern void m68k_push_dummy_frame PARAMS ((void));
-
-extern void m68k_pop_frame PARAMS ((void));
-
-/* Discard from the stack the innermost frame, restoring all registers. */
-
-#define POP_FRAME { m68k_pop_frame (); }
-
-/* Offset from SP to first arg on stack at first instruction of a function */
-
-#define SP_ARG0 (1 * 4)
+extern int m68k_get_longjmp_target (CORE_ADDR *);
projects / deliverable / binutils-gdb.git / blobdiff