/* Target machine sub-parameters for SPARC64, for GDB, the GNU debugger.
- This is included by other tm-*.h files to define SPARC cpu-related info.
- Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+ This is included by other tm-*.h files to define SPARC64 cpu-related info.
+ Copyright 1994, 1995, 1996, 1998, 1999, 2000
+ Free Software Foundation, Inc.
This is (obviously) based on the SPARC Vn (n<9) port.
Contributed by Doug Evans (dje@cygnus.com).
+ Further modified by Bob Manson (manson@cygnus.com).
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+
+#define GDB_MULTI_ARCH GDB_MULTI_ARCH_PARTIAL
+
+#ifndef GDB_TARGET_IS_SPARC64
+#define GDB_TARGET_IS_SPARC64 1
+#endif
#include "sparc/tm-sparc.h"
-/* We have long longs. */
-#define LONG_LONG
+/* Eeeew. Ok, we have to assume (for now) that the processor really is
+ in sparc64 mode. While this is the same instruction sequence as
+ on the Sparc, the stack frames are offset by +2047 (and the arguments
+ are 8 bytes instead of 4). */
+/* Instructions are:
+ std %f10, [ %fp + 0x7a7 ]
+ std %f8, [ %fp + 0x79f ]
+ std %f6, [ %fp + 0x797 ]
+ std %f4, [ %fp + 0x78f ]
+ std %f2, [ %fp + 0x787 ]
+ std %f0, [ %fp + 0x77f ]
+ std %g6, [ %fp + 0x777 ]
+ std %g4, [ %fp + 0x76f ]
+ std %g2, [ %fp + 0x767 ]
+ std %g0, [ %fp + 0x75f ]
+ std %fp, [ %fp + 0x757 ]
+ std %i4, [ %fp + 0x74f ]
+ std %i2, [ %fp + 0x747 ]
+ std %i0, [ %fp + 0x73f ]
+ nop
+ nop
+ nop
+ nop
+ rd %tbr, %o0
+ st %o0, [ %fp + 0x72b ]
+ rd %tpc, %o0
+ st %o0, [ %fp + 0x727 ]
+ rd %psr, %o0
+ st %o0, [ %fp + 0x723 ]
+ rd %y, %o0
+ st %o0, [ %fp + 0x71f ]
+ ldx [ %sp + 0x8a7 ], %o5
+ ldx [ %sp + 0x89f ], %o4
+ ldx [ %sp + 0x897 ], %o3
+ ldx [ %sp + 0x88f ], %o2
+ ldx [ %sp + 0x887 ], %o1
+ call %g0
+ ldx [ %sp + 0x87f ], %o0
+ nop
+ ta 1
+ nop
+ nop
+ */
+
+#if !defined (GDB_MULTI_ARCH) || (GDB_MULTI_ARCH == 0)
+/*
+ * The following defines must go away for MULTI_ARCH.
+ */
+
+#ifndef DO_CALL_DUMMY_ON_STACK
+
+/*
+ * These defines will suffice for the AT_ENTRY_POINT call dummy method.
+ */
+
+#undef CALL_DUMMY
+#define CALL_DUMMY {0}
+#undef CALL_DUMMY_LENGTH
+#define CALL_DUMMY_LENGTH 0
+#undef CALL_DUMMY_CALL_OFFSET
+#define CALL_DUMMY_CALL_OFFSET 0
+#undef CALL_DUMMY_START_OFFSET
+#define CALL_DUMMY_START_OFFSET 0
+#undef CALL_DUMMY_BREAKPOINT_OFFSET
+#define CALL_DUMMY_BREAKPOINT_OFFSET 0
+#undef CALL_DUMMY_BREAKPOINT_OFFSET_P
+#define CALL_DUMMY_BREAKPOINT_OFFSET_P 1
+#undef CALL_DUMMY_LOCATION
+#define CALL_DUMMY_LOCATION AT_ENTRY_POINT
+#undef DEPRECATED_PC_IN_CALL_DUMMY
+#define DEPRECATED_PC_IN_CALL_DUMMY(pc, sp, frame_address) deprecated_pc_in_call_dummy_at_entry_point (pc, sp, frame_address)
+#undef CALL_DUMMY_STACK_ADJUST
+#define CALL_DUMMY_STACK_ADJUST 128
+#undef SIZEOF_CALL_DUMMY_WORDS
+#define SIZEOF_CALL_DUMMY_WORDS 0
+#undef CALL_DUMMY_ADDRESS
+#define CALL_DUMMY_ADDRESS() entry_point_address()
+#undef FIX_CALL_DUMMY
+#define FIX_CALL_DUMMY(DUMMYNAME, PC, FUN, NARGS, ARGS, TYPE, GCC_P)
+#undef PUSH_RETURN_ADDRESS
+#define PUSH_RETURN_ADDRESS(PC, SP) sparc_at_entry_push_return_address (PC, SP)
+extern CORE_ADDR sparc_at_entry_push_return_address (CORE_ADDR pc,
+ CORE_ADDR sp);
-/* When passing a structure to a function, Sun cc passes the address
- in a register, not the structure itself. It (under SunOS4) creates
- two symbols, so we get a LOC_ARG saying the address is on the stack
- (a lie, and a serious one since we don't know which register to
- use), and a LOC_REGISTER saying that the struct is in a register
- (sort of a lie, but fixable with REG_STRUCT_HAS_ADDR). Gcc version
- two (as of 1.92) behaves like sun cc. REG_STRUCT_HAS_ADDR is smart
- enough to distinguish between Sun cc, gcc version 1 and gcc version 2.
+#undef STORE_STRUCT_RETURN
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+ sparc_at_entry_store_struct_return (ADDR, SP)
+extern void sparc_at_entry_store_struct_return (CORE_ADDR addr, CORE_ADDR sp);
+
+
+#else
+/*
+ * Old call dummy method, with CALL_DUMMY on the stack.
+ */
+
+#undef CALL_DUMMY
+#define CALL_DUMMY { 0x9de3bec0fd3fa7f7LL, 0xf93fa7eff53fa7e7LL,\
+ 0xf13fa7dfed3fa7d7LL, 0xe93fa7cfe53fa7c7LL,\
+ 0xe13fa7bfdd3fa7b7LL, 0xd93fa7afd53fa7a7LL,\
+ 0xd13fa79fcd3fa797LL, 0xc93fa78fc53fa787LL,\
+ 0xc13fa77fcc3fa777LL, 0xc83fa76fc43fa767LL,\
+ 0xc03fa75ffc3fa757LL, 0xf83fa74ff43fa747LL,\
+ 0xf03fa73f01000000LL, 0x0100000001000000LL,\
+ 0x0100000091580000LL, 0xd027a72b93500000LL,\
+ 0xd027a72791480000LL, 0xd027a72391400000LL,\
+ 0xd027a71fda5ba8a7LL, 0xd85ba89fd65ba897LL,\
+ 0xd45ba88fd25ba887LL, 0x9fc02000d05ba87fLL,\
+ 0x0100000091d02001LL, 0x0100000001000000LL }
+
+
+/* 128 is to reserve space to write the %i/%l registers that will be restored
+ when we resume. */
+#undef CALL_DUMMY_STACK_ADJUST
+#define CALL_DUMMY_STACK_ADJUST 128
+
+/* Size of the call dummy in bytes. */
+#undef CALL_DUMMY_LENGTH
+#define CALL_DUMMY_LENGTH 192
+
+/* Offset within CALL_DUMMY of the 'call' instruction. */
+#undef CALL_DUMMY_START_OFFSET
+#define CALL_DUMMY_START_OFFSET 148
+
+/* Offset within CALL_DUMMY of the 'call' instruction. */
+#undef CALL_DUMMY_CALL_OFFSET
+#define CALL_DUMMY_CALL_OFFSET (CALL_DUMMY_START_OFFSET + (5 * 4))
+
+/* Offset within CALL_DUMMY of the 'ta 1' instruction. */
+#undef CALL_DUMMY_BREAKPOINT_OFFSET
+#define CALL_DUMMY_BREAKPOINT_OFFSET (CALL_DUMMY_START_OFFSET + (8 * 4))
+
+/* Let's GDB know that it can make a call_dummy breakpoint. */
+#undef CALL_DUMMY_BREAKPOINT_OFFSET_P
+#define CALL_DUMMY_BREAKPOINT_OFFSET_P 1
+
+/* Call dummy will be located on the stack. */
+#undef CALL_DUMMY_LOCATION
+#define CALL_DUMMY_LOCATION ON_STACK
+#undef DEPRECATED_PC_IN_CALL_DUMMY
+#define DEPRECATED_PC_IN_CALL_DUMMY(pc, sp, frame_address) deprecated_pc_in_call_dummy_on_stack (pc, sp, frame_address)
+
+/* Insert the function address into the call dummy. */
+#undef FIX_CALL_DUMMY
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
+ sparc_fix_call_dummy (dummyname, pc, fun, type, gcc_p)
+void sparc_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun,
+ struct type *value_type, int using_gcc);
+
+
+/* The remainder of these will accept the default definition. */
+#undef SIZEOF_CALL_DUMMY_WORDS
+#undef PUSH_RETURN_ADDRESS
+#undef CALL_DUMMY_ADDRESS
+#undef STORE_STRUCT_RETURN
- This still doesn't work if the argument is not one passed in a
- register (i.e. it's the 7th or later argument). */
+#endif
-#undef REG_STRUCT_HAS_ADDR
-#define REG_STRUCT_HAS_ADDR(gcc_p) (gcc_p != 1)
-#undef STRUCT_ARG_SYM_GARBAGE
-#define STRUCT_ARG_SYM_GARBAGE(gcc_p) (gcc_p != 1)
+/* Does the specified function use the "struct returning" convention
+ or the "value returning" convention? The "value returning" convention
+ almost invariably returns the entire value in registers. The
+ "struct returning" convention often returns the entire value in
+ memory, and passes a pointer (out of or into the function) saying
+ where the value (is or should go).
-/* Stack has strict alignment. */
+ Since this sometimes depends on whether it was compiled with GCC,
+ this is also an argument. This is used in call_function to build a
+ stack, and in value_being_returned to print return values.
-#undef STACK_ALIGN
-#define STACK_ALIGN(ADDR) (((ADDR)+15)&-16)
+ On Sparc64, we only pass pointers to structs if they're larger than
+ 32 bytes. Otherwise they're stored in %o0-%o3 (floating-point
+ values go into %fp0-%fp3). */
-/* Nonzero if instruction at PC is a return instruction. */
-/* For SPARC, this is either a "jmpl %o7+8,%g0" or "jmpl %i7+8,%g0".
+#undef USE_STRUCT_CONVENTION
+#define USE_STRUCT_CONVENTION(gcc_p, type) (TYPE_LENGTH (type) > 32)
- Note: this does not work for functions returning structures under SunOS.
- This should work for v9, however. */
-#undef ABOUT_TO_RETURN
-#define ABOUT_TO_RETURN(pc) \
- ((read_memory_integer (pc, 4)|0x00040000) == 0x81c7e008)
+CORE_ADDR sparc64_push_arguments (int,
+ struct value **, CORE_ADDR, int, CORE_ADDR);
+#undef PUSH_ARGUMENTS
+#define PUSH_ARGUMENTS(A,B,C,D,E) \
+ (sparc64_push_arguments ((A), (B), (C), (D), (E)))
-/* Say how long (ordinary) registers are. */
+/* Store the address of the place in which to copy the structure the
+ subroutine will return. This is called from call_function. */
+/* FIXME: V9 uses %o0 for this. */
-#undef REGISTER_TYPE
-#define REGISTER_TYPE long long
+#undef STORE_STRUCT_RETURN
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+ { target_write_memory ((SP)+(16*8), (char *)&(ADDR), 8); }
-/* Number of machine registers */
+/* Stack must be aligned on 128-bit boundaries when synthesizing
+ function calls. */
-#undef NUM_REGS
-#define NUM_REGS 127
+#undef STACK_ALIGN
+#define STACK_ALIGN(ADDR) (((ADDR) + 15 ) & -16)
/* Initializer for an array of names of registers.
There should be NUM_REGS strings in this initializer. */
They are here for kernel debuggers, etc. */
/* FIXME: icc and xcc are currently considered separate registers.
This may have to change and consider them as just one (ccr).
- Let's postpone this as long as we can. */
+ Let's postpone this as long as we can. It's nice to be able to set
+ them individually. */
/* FIXME: fcc0-3 are currently separate, even though they are also part of
fsr. May have to remove them but let's postpone this as long as
- possible. */
-/* FIXME: cle and tle are new registers that haven't entered the docs yet.
- They stand for "current little endian format" and "trap little endian
- format". */
+ possible. It's nice to be able to set them individually. */
+/* FIXME: Whether to include f33, f35, etc. here is not clear.
+ There are advantages and disadvantages. */
#undef REGISTER_NAMES
#define REGISTER_NAMES \
"f32", "f34", "f36", "f38", "f40", "f42", "f44", "f46", \
"f48", "f50", "f52", "f54", "f56", "f58", "f60", "f62", \
\
- "ccr", "y", "pc", "npc", "asi", "cle", "tle", \
- "fsr", "fprs", "ver", "tick", "pil", "pstate", "wstate", \
- "tba", "tl", "tt", "tpc", "tnpc", "tstate", \
+ "pc", "npc", "ccr", "fsr", "fprs", "y", "asi", \
+ "ver", "tick", "pil", "pstate", \
+ "tstate", "tba", "tl", "tt", "tpc", "tnpc", "wstate", \
"cwp", "cansave", "canrestore", "cleanwin", "otherwin", \
"asr16", "asr17", "asr18", "asr19", "asr20", "asr21", \
"asr22", "asr23", "asr24", "asr25", "asr26", "asr27", \
"icc", "xcc", "fcc0", "fcc1", "fcc2", "fcc3" \
}
+#undef REG_STRUCT_HAS_ADDR
+#define REG_STRUCT_HAS_ADDR(gcc_p,type) (TYPE_LENGTH (type) > 32)
+
+extern CORE_ADDR sparc64_read_sp ();
+extern CORE_ADDR sparc64_read_fp ();
+extern void sparc64_write_sp (CORE_ADDR);
+
+#define TARGET_READ_SP() (sparc64_read_sp ())
+#define TARGET_READ_FP() (sparc64_read_fp ())
+#define TARGET_WRITE_SP(X) (sparc64_write_sp (X))
+
+#undef DEPRECATED_EXTRACT_RETURN_VALUE
+#define DEPRECATED_EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+ sp64_extract_return_value(TYPE, REGBUF, VALBUF, 0)
+extern void sp64_extract_return_value (struct type *, char[], char *, int);
+
/* Register numbers of various important registers.
Note that some of these values are "real" register numbers,
and correspond to the general registers of the machine,
to be actual register numbers as far as the user is concerned
but do serve to get the desired values when passed to read_register. */
-#if 0 /* defined in tm-sparc.h, replicated for doc purposes */
-#define G0_REGNUM 0 /* %g0 */
+#if 0 /* defined in tm-sparc.h, replicated
+ for doc purposes */
+#define G0_REGNUM 0 /* %g0 */
#define G1_REGNUM 1 /* %g1 */
#define O0_REGNUM 8 /* %o0 */
#define SP_REGNUM 14 /* Contains address of top of stack, \
#define FP0_REGNUM 32 /* Floating point register 0 */
#endif
-#define FP_MAX_REGNUM 80 /* 1 + last fp reg number */
+/*#define FP_MAX_REGNUM 80*/ /* 1 + last fp reg number */
/* #undef v8 misc. regs */
/* v9 misc. and priv. regs */
-#define C0_REGNUM 80 /* Start of control registers */
-#define CCR_REGNUM (C0_REGNUM + 0) /* Condition Code Register (%xcc,%icc) */
-#define Y_REGNUM (C0_REGNUM + 1) /* Temp register for multiplication, etc. */
-#define PC_REGNUM (C0_REGNUM + 2) /* floating point condition code reg 2 */
-#define NPC_REGNUM (C0_REGNUM + 3) /* floating point condition code reg 2 */
-#define ASI_REGNUM (C0_REGNUM + 4) /* Alternate Space Identifier */
-#define CLE_REGNUM (C0_REGNUM + 5) /* Current Little Endian format */
-#define TLE_REGNUM (C0_REGNUM + 6) /* Trap Little Endian format */
-#define FSR_REGNUM (C0_REGNUM + 7) /* Floating Point State */
-#define FPRS_REGNUM (C0_REGNUM + 8) /* Floating Point Registers State */
-#define VER_REGNUM (C0_REGNUM + 9) /* Version register */
-#define TICK_REGNUM (C0_REGNUM + 10) /* Tick register */
-#define PIL_REGNUM (C0_REGNUM + 11) /* Processor Interrupt Level */
-#define PSTATE_REGNUM (C0_REGNUM + 12) /* Processor State */
-#define WSTATE_REGNUM (C0_REGNUM + 13) /* Window State */
-#define TBA_REGNUM (C0_REGNUM + 14) /* floating point condition code reg 3 */
-#define TL_REGNUM (C0_REGNUM + 15) /* Trap Level */
-#define TT_REGNUM (C0_REGNUM + 16) /* Trap Type */
-#define TPC_REGNUM (C0_REGNUM + 17) /* Trap pc */
-#define TNPC_REGNUM (C0_REGNUM + 18) /* Trap npc */
-#define TSTATE_REGNUM (C0_REGNUM + 19) /* Trap State */
-#define CWP_REGNUM (C0_REGNUM + 20) /* Current Window Pointer */
-#define CANSAVE_REGNUM (C0_REGNUM + 21) /* Savable Windows */
-#define CANRESTORE_REGNUM (C0_REGNUM + 22) /* Restorable Windows */
-#define CLEANWIN_REGNUM (C0_REGNUM + 23) /* Clean Windows */
-#define OTHERWIN_REGNUM (C0_REGNUM + 24) /* Other Windows */
-#define ASR_REGNUM(n) (C0_REGNUM+(25-16)+(n)) /* Ancillary State Register
+#define C0_REGNUM 80 /* Start of control registers */
+
+#define PC_REGNUM (C0_REGNUM + 0) /* Current PC */
+#define NPC_REGNUM (C0_REGNUM + 1) /* Next PC */
+#define CCR_REGNUM (C0_REGNUM + 2) /* Condition Code Register (%xcc,%icc) */
+#define FSR_REGNUM (C0_REGNUM + 3) /* Floating Point State */
+#define FPRS_REGNUM (C0_REGNUM + 4) /* Floating Point Registers State */
+#define Y_REGNUM (C0_REGNUM + 5) /* Temp register for multiplication, etc. */
+#define ASI_REGNUM (C0_REGNUM + 6) /* Alternate Space Identifier */
+#define VER_REGNUM (C0_REGNUM + 7) /* Version register */
+#define TICK_REGNUM (C0_REGNUM + 8) /* Tick register */
+#define PIL_REGNUM (C0_REGNUM + 9) /* Processor Interrupt Level */
+#define PSTATE_REGNUM (C0_REGNUM + 10) /* Processor State */
+#define TSTATE_REGNUM (C0_REGNUM + 11) /* Trap State */
+#define TBA_REGNUM (C0_REGNUM + 12) /* Trap Base Address */
+#define TL_REGNUM (C0_REGNUM + 13) /* Trap Level */
+#define TT_REGNUM (C0_REGNUM + 14) /* Trap Type */
+#define TPC_REGNUM (C0_REGNUM + 15) /* Trap pc */
+#define TNPC_REGNUM (C0_REGNUM + 16) /* Trap npc */
+#define WSTATE_REGNUM (C0_REGNUM + 17) /* Window State */
+#define CWP_REGNUM (C0_REGNUM + 18) /* Current Window Pointer */
+#define CANSAVE_REGNUM (C0_REGNUM + 19) /* Savable Windows */
+#define CANRESTORE_REGNUM (C0_REGNUM + 20) /* Restorable Windows */
+#define CLEANWIN_REGNUM (C0_REGNUM + 21) /* Clean Windows */
+#define OTHERWIN_REGNUM (C0_REGNUM + 22) /* Other Windows */
+#define ASR_REGNUM(n) (C0_REGNUM+(23-16)+(n)) /* Ancillary State Register
(n = 16...31) */
-#define ICC_REGNUM (C0_REGNUM + 41) /* 32 bit condition codes */
-#define XCC_REGNUM (C0_REGNUM + 42) /* 64 bit condition codes */
-#define FCC0_REGNUM (C0_REGNUM + 43) /* floatpoint condition code reg 0 */
-#define FCC1_REGNUM (C0_REGNUM + 44) /* floating point condition code reg 0 */
-#define FCC2_REGNUM (C0_REGNUM + 45) /* floating point condition code reg 1 */
-#define FCC3_REGNUM (C0_REGNUM + 46) /* floating point condition code reg 2 */
-
-/* FIXME: PS_REGNUM, FPS_REGNUM, CPS_REGNUM are for priviledged v8 registers
- which don't exist in v9 (in the same form). We use bits of sparc-tdep.c
- which requires these, so define them here to be unused ASR regs so
- sparc-tdep.c will compile. What we really want to do is put some
- conditionals in sparc-tdep.c (run time or compile time) or separate the v8
- stuff out of sparc-tdep.c. */
-
-#define PS_REGNUM (ASR_REGNUM (29))
-#define FPS_REGNUM (ASR_REGNUM (30))
-#define CPS_REGNUM (ASR_REGNUM (31))
+#define ICC_REGNUM (C0_REGNUM + 39) /* 32 bit condition codes */
+#define XCC_REGNUM (C0_REGNUM + 40) /* 64 bit condition codes */
+#define FCC0_REGNUM (C0_REGNUM + 41) /* fp cc reg 0 */
+#define FCC1_REGNUM (C0_REGNUM + 42) /* fp cc reg 1 */
+#define FCC2_REGNUM (C0_REGNUM + 43) /* fp cc reg 2 */
+#define FCC3_REGNUM (C0_REGNUM + 44) /* fp cc reg 3 */
+
+/* Number of machine registers. */
+
+#undef NUM_REGS
+#define NUM_REGS 125
/* Total amount of space needed to store our copies of the machine's
register state, the array `registers'.
Some of the registers aren't 64 bits, but it's a lot simpler just to assume
they all are (since most of them are). */
#undef REGISTER_BYTES
-#define REGISTER_BYTES (32*8+32*8+47*8)
+#define REGISTER_BYTES (32*8+32*8+45*8)
/* Index within `registers' of the first byte of the space for
register N. */
: (N) < C0_REGNUM ? 32*8 + 32*4 + ((N)-64)*8 \
: 64*8 + ((N)-C0_REGNUM)*8)
+/* Say how long (ordinary) registers are. This is a piece of bogosity
+ used in push_word and a few other places; REGISTER_RAW_SIZE is the
+ real way to know how big a register is. */
+
+#undef REGISTER_SIZE
+#define REGISTER_SIZE 8
+
/* Number of bytes of storage in the actual machine representation
for register N. */
#undef REGISTER_RAW_SIZE
-#define REGISTER_RAW_SIZE(N) (8)
+#define REGISTER_RAW_SIZE(N) \
+ ((N) < 32 ? 8 : (N) < 64 ? 4 : 8)
/* Number of bytes of storage in the program's representation
for register N. */
#undef REGISTER_VIRTUAL_SIZE
-#define REGISTER_VIRTUAL_SIZE(N) (8)
+#define REGISTER_VIRTUAL_SIZE(N) \
+ ((N) < 32 ? 8 : (N) < 64 ? 4 : 8)
/* Largest value REGISTER_RAW_SIZE can have. */
/* tm-sparc.h defines this as 8, but play it safe. */
#undef MAX_REGISTER_RAW_SIZE
-#define MAX_REGISTER_RAW_SIZE (8)
+#define MAX_REGISTER_RAW_SIZE 8
/* Largest value REGISTER_VIRTUAL_SIZE can have. */
/* tm-sparc.h defines this as 8, but play it safe. */
#undef MAX_REGISTER_VIRTUAL_SIZE
-#define MAX_REGISTER_VIRTUAL_SIZE (8)
-
-/* Convert data from raw format for register REGNUM
- to virtual format for register REGNUM. */
-/* ??? Remove when tm-sparc.h is fixed. */
-
-#undef REGISTER_CONVERT_TO_VIRTUAL
-#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \
-{ memcpy ((TO), (FROM), REGISTER_RAW_SIZE (0)); }
-
-/* Convert data from virtual format for register REGNUM
- to raw format for register REGNUM. */
-/* ??? Remove when tm-sparc.h is fixed. */
-
-#undef REGISTER_CONVERT_TO_RAW
-#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) \
-{ memcpy ((TO), (FROM), REGISTER_RAW_SIZE (0)); }
+#define MAX_REGISTER_VIRTUAL_SIZE 8
/* Return the GDB type object for the "standard" data type
of data in register N. */
#undef REGISTER_VIRTUAL_TYPE
#define REGISTER_VIRTUAL_TYPE(N) \
- ((N) < 32 ? builtin_type_long_long : (N) < 80 ? builtin_type_float : \
- builtin_type_long_long)
+ ((N) < 32 ? builtin_type_long_long \
+ : (N) < 64 ? builtin_type_float \
+ : (N) < 80 ? builtin_type_double \
+ : builtin_type_long_long)
/* We use to support both 32 bit and 64 bit pointers.
We can't anymore because TARGET_PTR_BIT must now be a constant. */
#undef TARGET_PTR_BIT
#define TARGET_PTR_BIT 64
-/* Store the address of the place in which to copy the structure the
- subroutine will return. This is called from call_function. */
-/* FIXME: V9 uses %o0 for this. */
-
-#undef STORE_STRUCT_RETURN
-#define STORE_STRUCT_RETURN(ADDR, SP) \
- { target_write_memory ((SP)+(16*8), (char *)&(ADDR), 8); }
+/* Longs are 64 bits. */
+#undef TARGET_LONG_BIT
+#define TARGET_LONG_BIT 64
-/* Extract from an array REGBUF containing the (raw) register state
- a function return value of type TYPE, and copy that, in virtual format,
- into VALBUF. */ /* FIXME */
-
-#undef EXTRACT_RETURN_VALUE
-#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
- { \
- if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \
- { \
- memcpy ((VALBUF), ((int *)(REGBUF))+FP0_REGNUM, TYPE_LENGTH(TYPE));\
- } \
- else \
- memcpy ((VALBUF), \
- (char *)(REGBUF) + 8 * 8 + \
- (TYPE_LENGTH(TYPE) >= 8 ? 0 : 8 - TYPE_LENGTH(TYPE)), \
- TYPE_LENGTH(TYPE)); \
- }
-
-/* Extract from an array REGBUF containing the (raw) register state
- the address in which a function should return its structure value,
- as a CORE_ADDR (or an expression that can be used as one). */
-
-#undef EXTRACT_STRUCT_VALUE_ADDRESS
-#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
- (sparc64_extract_struct_value_address (REGBUF))
-
-extern CORE_ADDR
-sparc64_extract_struct_value_address PARAMS ((char [REGISTER_BYTES]));
+#undef TARGET_LONG_LONG_BIT
+#define TARGET_LONG_LONG_BIT 64
/* Return number of bytes at start of arglist that are not really args. */
#undef FRAME_ARGS_SKIP
#define FRAME_ARGS_SKIP 136
-\f
-/* Sparc has no reliable single step ptrace call */
-
-#undef NO_SINGLE_STEP
-#define NO_SINGLE_STEP 1
-extern void single_step ();
-
-/* We need two arguments (in general) to the "info frame" command.
- Note that the definition of this macro implies that there exists a
- function "setup_arbitrary_frame" in sparc-tdep.c */
-
-#undef SETUP_ARBITRARY_FRAME /*FIXME*/
-#undef FRAME_SPECIFICATION_DYADIC
-#define FRAME_SPECIFICATION_DYADIC
-
-/* To print every pair of float registers as a double, we use this hook.
- We also print the condition code registers in a readable format
- (FIXME: can expand this to all control regs). */
-
-#undef PRINT_REGISTER_HOOK
-#define PRINT_REGISTER_HOOK(regno) \
- sparc_print_register_hook (regno)
+#endif /* GDB_MULTI_ARCH */
+\f
/* Offsets into jmp_buf.
FIXME: This was borrowed from the v8 stuff and will probably have to change
for v9. */
#define JB_O0 7
#define JB_WBCNT 8
-/* Figure out where the longjmp will land. We expect that we have just entered
- longjmp and haven't yet setup the stack frame, so the args are still in the
- output regs. %o0 (O0_REGNUM) points at the jmp_buf structure from which we
- extract the pc (JB_PC) that we will land at. The pc is copied into ADDR.
- This routine returns true on success */
+/* Figure out where the longjmp will land. We expect that we have
+ just entered longjmp and haven't yet setup the stack frame, so the
+ args are still in the output regs. %o0 (O0_REGNUM) points at the
+ jmp_buf structure from which we extract the pc (JB_PC) that we will
+ land at. The pc is copied into ADDR. This routine returns true on
+ success */
-extern int
-get_longjmp_target PARAMS ((CORE_ADDR *));
+extern int get_longjmp_target (CORE_ADDR *);
#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+
+#undef TM_PRINT_INSN_MACH
+#define TM_PRINT_INSN_MACH bfd_mach_sparc_v9a
+