-#!/bin/sh
+#! /bin/sh
-# Configuration script
-# Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.3
+# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+ --enable-netrom "
+ac_help="$ac_help
+ --enable-gdbtk "
+ac_help="$ac_help
+ --with-x use the X Window System"
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
-#This file is part of GNU.
+# Initialize some other variables.
+subdirs=
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ac_prev=
+for ac_option
+do
-# $Id$
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ case "$ac_option" in
+ -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) ac_optarg= ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case "$ac_option" in
+
+ -build | --build | --buil | --bui | --bu | --b)
+ ac_prev=build ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=* | --b=*)
+ build="$ac_optarg" ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file="$ac_optarg" ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ eval "enable_${ac_feature}=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix="$ac_optarg" ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he)
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+ --cache-file=FILE cache test results in FILE
+ --help print this message
+ --no-create do not create output files
+ --quiet, --silent do not print \`checking...' messages
+ --version print the version of autoconf that created configure
+Directory and file names:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=PREFIX install architecture-dependent files in PREFIX
+ [same as prefix]
+ --srcdir=DIR find the sources in DIR [configure dir or ..]
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+Host type:
+ --build=BUILD configure for building on BUILD [BUILD=HOST]
+ --host=HOST configure for HOST [guessed]
+ --target=TARGET configure for TARGET [TARGET=HOST]
+Features and packages:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --x-includes=DIR X include files are in DIR
+ --x-libraries=DIR X library files are in DIR
+--enable and --with options recognized:$ac_help
+EOF
+ exit 0 ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host="$ac_optarg" ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix="$ac_optarg" ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix="$ac_optarg" ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix="$ac_optarg" ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name="$ac_optarg" ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site="$ac_optarg" ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir="$ac_optarg" ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target="$ac_optarg" ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers)
+ echo "configure generated by autoconf version 2.3"
+ exit 0 ;;
+
+ -with-* | --with-*)
+ ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_${ac_package}='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ eval "with_${ac_package}=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes="$ac_optarg" ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries="$ac_optarg" ;;
+
+ -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+ ;;
-#
-# Shell script to create proper links to machine-dependent files in
-# preparation for compilation.
-#
-# If configure succeeds, it leaves its status in config.status.
-# If configure fails after disturbing the status quo,
-# config.status is removed.
-#
+ *)
+ if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+ echo "configure: warning: $ac_option: invalid host type" 1>&2
+ fi
+ if test "x$nonopt" != xNONE; then
+ { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+ fi
+ nonopt="$ac_option"
+ ;;
-remove=rm
-hard_link=ln
-symbolic_link='ln -s'
-
-#for Test
-#remove="echo rm"
-#hard_link="echo ln"
-#symbolic_link="echo ln -s"
-
-progname=$0
-
-# clear some things potentially inherited from environment.
-ansi=
-arguments=$*
-defaulttargets=
-destdir=
-fatal=
-hostsubdir=
-Makefile=Makefile
-Makefile_in=Makefile.in
-norecursion=
-recurring=
-removing=
-srcdir=
-srctrigger=
-target=
-targets=
-commontargets=
-configdirs=
-targetsubdir=
-template=
-verbose=
+ esac
+done
-for arg in $*;
+if test -n "$ac_prev"; then
+ { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+ exec 6>/dev/null
+else
+ exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
do
- case ${arg} in
- -ansi | +a*)
- ansi=true
- clib=clib
- ;;
- -destdir=* | +destdir=* | +destdi=* | +destd=* | +dest=* | +des=* | +de=* | +d=*)
- destdir=`echo ${arg} | sed 's/[+-]d[a-z]*=//'`
- ;;
- -languages=* | +languages=* | +language=* | +languag=* \
- | +langua=* | +langu=* | +lang=* | +lan=* | +la=* \
- | +l=*)
- languages="${languages} `echo ${arg} | sed 's/[+-]l[a-z]*=//'`"
- ;;
- -gas | +g*)
- gas=yes
- ;;
- -help | +h*)
- fatal=true
- ;;
- -nfp | +nf*)
- nfp=yes
- ;;
- -norecursion | +no*)
- norecursion=true
- ;;
- -recurring | +recurring | +recurrin | +recurri | +recurr | +recur | +recu | +rec | +re)
- recurring=true
- ;;
- -rm | +rm)
- removing=${arg}
- ;;
-# -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
-# srcdir=`echo ${arg} | sed 's/[+-]s[a-z]*=//'`
-# ;;
- -subdirs | +f* | +su*)
- subdirs=${arg}
- ;;
- -target=* | +target=* | +targe=* | +targ=* | +tar=* | +ta=*)
- if [ -n "${targets}" ] ; then
- subdirs="+subdirs"
- fi
-
- newtargets="${targets} `echo ${arg} | sed 's/[+-]t[a-z]*=//'`"
- targets="${newtargets}"
- ;;
- -template=* | +template=* | +templat=* | +templa=* | +templ=* | +temp=* | +tem=* | +te=*)
- template=`echo ${arg} | sed 's/[+-]template=//'`
- ;;
- -v | -verbose | +v*)
- verbose=${arg}
- ;;
- -* | +*)
- (echo ;
- echo "Unrecognized option: \"${arg}\"". ;
- echo) 1>&2
- fatal=true
- ;;
- *)
- if [ -n "${hosts}" ] ; then
- subdirs="+subdirs"
- fi
-
- newhosts="${hosts} ${arg}"
- hosts=${newhosts}
- ;;
- esac
+ case "$ac_arg" in
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c) ;;
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+ ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+ esac
done
-if [ -n "${verbose}" ] ; then
- echo `pwd`/configure $*
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=main.c
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_prog=$0
+ ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+ test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+ else
+ { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+ fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ echo "loading site script $ac_site_file"
+ . "$ac_site_file"
+ fi
+done
-# process host and target only if not rebuilding configure itself or removing.
-if [ -z "${template}" -a -z "${removing}" -a -z "${fatal}" ] ; then
- # Complain if an arg is missing
- if [ -z "${hosts}" ] ; then
- (echo ;
- echo "configure: No HOST specified." ;
- echo) 1>&2
- fatal=true
- fi
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
fi
-if [ -n "${fatal}" -o "${hosts}" = "help" ] ; then
- (echo "Usage: configure HOST" ;
- echo ;
- echo "Options: [defaults in brackets]" ;
- echo " +ansi configure w/ANSI library. [no ansi lib]" ;
- echo " +destdir=MYDIR configure for installation into MYDIR. [/usr/local]" ;
- echo " +subdirs configure in subdirectories. [in source directories]" ;
- echo " +lang=LANG configure to build LANG. [gcc]" ;
- echo " +help print this message. [normal config]" ;
- echo " +gas configure the compilers for use with gas. [native as]" ;
- echo " +nfp configure the compilers default to soft floating point. [hard float]" ;
- echo " +norecursion configure this directory only. [recurse]" ;
- echo " +rm remove this configuration. [build a configuration]" ;
- echo " +target=TARGET configure for TARGET. [TARGET = HOST]" ;
- echo " +template=TEM rebuild configure using TEM. [normal config]" ;
- echo ;
- echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ;
- echo "Asking for more than one \"+target\" implies \"+subdirs\". Any other" ;
- echo "options given will apply to all targets.") 1>&2
-
- if [ -r config.status ] ; then
- cat config.status
- fi
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5 2>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5 2>&5'
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+ # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+ if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+ ac_n= ac_c='
+' ac_t=' '
+ else
+ ac_n=-n ac_c= ac_t=
+ fi
+else
+ ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+CC=${CC-cc}
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_CC" && ac_cv_prog_CC="cc"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
- exit 1
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if ${CC-cc} -E conftest.c 2>&5 | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
fi
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+ if test "${CFLAGS+set}" != set; then
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_gcc_g=yes
+else
+ ac_cv_prog_gcc_g=no
+fi
+rm -f conftest*
-#### configure.in common parts come in here.
-srcname="GDB"
-srctrigger=main.c
+fi
+ echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
+ if test $ac_cv_prog_gcc_g = yes; then
+ CFLAGS="-g -O"
+ else
+ CFLAGS="-O"
+ fi
+ fi
+else
+ GCC=
+ test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
-## end of common part.
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 498 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 512 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+fi
+CPP="$ac_cv_prog_CPP"
+echo "$ac_t""$CPP" 1>&6
+
+echo $ac_n "checking for AIX""... $ac_c" 1>&6
+cat > conftest.$ac_ext <<EOF
+#line 537 "configure"
+#include "confdefs.h"
+#ifdef _AIX
+ yes
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "yes" >/dev/null 2>&1; then
+ rm -rf conftest*
+ echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF
+#define _ALL_SOURCE 1
+EOF
+
+else
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6
+fi
+rm -f conftest*
+
+
+ac_safe=`echo "minix/config.h" | tr './\055' '___'`
+echo $ac_n "checking for minix/config.h""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 564 "configure"
+#include "confdefs.h"
+#include <minix/config.h>
+EOF
+eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ MINIX=yes
+else
+ echo "$ac_t""no" 1>&6
+MINIX=
+fi
-# are we rebuilding config itself?
-if [ -n "${template}" ] ; then
- if [ ! -r ${template} ] ; then
- echo '***' "Can't find template ${template}." 1>&2
- exit 1
- fi
+if test "$MINIX" = yes; then
+ cat >> confdefs.h <<\EOF
+#define _POSIX_SOURCE 1
+EOF
-# prep the template
- sed -e '/^#### configure.in common parts come in here.$/,/^## end of common part.$/c\
-#### configure.in common parts come in here.\
-## end of common part.' \
- -e '/^#### configure.in per-host parts come in here.$/,/^## end of per-host part.$/c\
-#### configure.in per-host parts come in here.\
-## end of per-host part.' \
- -e '/^#### configure.in per-target parts come in here.$/,/^## end of per-target part.$/c\
-#### configure.in per-target parts come in here.\
-## end of per-target part.' \
- -e '/^#### configure.in post-target parts come in here.$/,/^## end of post-target part.$/c\
-#### configure.in post-target parts come in here.\
-## end of post-target part.' \
- < ${template} > template.new
-
- if [ -r configure.in ] ; then
- if [ -z "`grep '^# per\-host:' configure.in`" ] ; then
- echo '***' `pwd`/configure.in has no "per-host:" line. 1>&2
- exit 1
- fi
-
- if [ -z "`grep '^# per\-target:' configure.in`" ] ; then
- echo '***' `pwd`/configure.in has no "per-target:" line. 1>&2
- exit 1
- fi
-
- # split configure.in into common, per-host, per-target,
- # and post-target parts. Post-target is optional.
- sed -e '/^# per\-host:/,$d' configure.in > configure.com
- sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' configure.in > configure.hst
- if grep -s '^# post-target:' configure.in ; then
- sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' configure.in > configure.tgt
- sed -e '1,/^# post\-target:/d' configure.in > configure.pos
- else
- sed -e '1,/^# per\-target:/d' configure.in > configure.tgt
- echo >configure.pos
- fi
-
- # and insert them
- sed -e '/^#### configure.in common parts come in here.$/ r configure.com' \
- -e '/^#### configure.in per\-host parts come in here.$/ r configure.hst' \
- -e '/^#### configure.in per\-target parts come in here.$/ r configure.tgt' \
- -e '/^#### configure.in post\-target parts come in here.$/ r configure.pos' \
- template.new > configure.new
-
- rm -f configure.com configure.tgt configure.hst configure.pos
- else
- echo Warning: no configure.in in `pwd`
- cat ${template} >> configure
- fi
+ cat >> confdefs.h <<\EOF
+#define _POSIX_1_SOURCE 2
+EOF
- chmod a+x configure.new
- rm template.new
-# mv configure configure.old
- mv configure.new configure
+ cat >> confdefs.h <<\EOF
+#define _MINIX 1
+EOF
- if [ -n "${verbose}" ] ; then
- echo Rebuilt configure in `pwd`
- fi
+fi
- # Now update config.sub from the template directory.
- if echo "$template" | grep -s 'configure$' ; then
- cp `echo "$template" | sed s/configure$/config.sub/` ./config.sub.new
- # mv config.sub config.sub.old
- mv config.sub.new config.sub
+echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
+if test -d /etc/conf/kconfig.d &&
+ grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
+then
+ echo "$ac_t""yes" 1>&6
+ ISC=yes # If later tests want to check for ISC.
+ cat >> confdefs.h <<\EOF
+#define _POSIX_SOURCE 1
+EOF
+
+ if test "$GCC" = yes; then
+ CC="$CC -posix"
+ else
+ CC="$CC -Xp"
+ fi
+else
+ echo "$ac_t""no" 1>&6
+ ISC=
+fi
- if [ -n "${verbose}" ] ; then
- echo Rebuilt config.sub in `pwd`
- fi
- fi
- if [ -z "${norecursion}" ] ; then
- # If template is relative path, make it absolute for recurring.
- if echo "${template}" | grep -s '^/' ; then
- true
- else
- template=`pwd`/${template}
- fi
-
- while [ -n "${configdirs}" ] ; do
- # set configdir to car of configdirs, configdirs to cdr of configdirs
- set ${configdirs}; configdir=$1; shift; configdirs=$*
-
- if [ "`echo ${configdir}.*`" != "${configdir}.*" ] ; then
- targetspecificdirs=${configdir}.*
- else
- targetspecificdirs=
- fi
-
- for i in ${configdir} ${targetspecificdirs} ; do
- if [ -d $i ] ; then
- if [ -r $i/configure ] ; then
- (cd $i ;
- ./configure +template=${template} ${verbose})
- else
- echo Warning: No configure script in `pwd`/$i
- fi
- else
- if [ -n "${verbose}" ] ; then
- echo Warning: directory $i is missing.
- fi
- fi
- done
- done
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ for ac_prog in ginstall installbsd scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ # OSF/1 installbsd also uses dspmsg, but is usable.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_ifs"
+ # As a last resort, use the slow shell script.
+ test -z "$ac_cv_path_install" && ac_cv_path_install="$ac_install_sh"
+fi
+ INSTALL="$ac_cv_path_install"
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/.. $srcdir/`cd $srcdir;pwd`/..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/.. $srcdir/`cd $srcdir;pwd`/.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+# configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+# same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+# as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
- exit 0
+
+# Make sure we can run config.sub.
+if $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
-# some sanity checks on configure.in
-if [ -z "${srctrigger}" ] ; then
- echo Warning: srctrigger not set in configure.in. `pwd` not configured.
- exit 1
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`$ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`$ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`$ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`$ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $.
+ echo 's,\\,\\\\,g; s,\$,$$,g' > conftestsed
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-for host in ${hosts} ; do
- # Default other arg
- if [ -z "${targets}" -o -n "${defaulttargets}" ] ; then
- targets=${host}
- defaulttargets=true
- fi
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
- host_alias=${host}
- result=`/bin/sh ./config.sub ${host}`
- host_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
- host_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
- host_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
- host=${host_cpu}-${host_vendor}-${host_os}
- host_makefile_frag=config/hmake-${host}
-#### configure.in per-host parts come in here.
+ENABLE_CFLAGS=
+ENABLE_CLIBS=
+ENABLE_OBS=
-# map host info into gdb names.
+# Check whether --enable-netrom or --disable-netrom was given.
+enableval="$enable_netrom"
+if test -n "$enableval"; then
+ case "${enableval}" in
+yes) enable_netrom=yes ;;
+no) enable_netrom=no ;;
+*) { echo "configure: error: bad value ${enableval} given for netrom option" 1>&2; exit 1; } ;;
+esac
+fi
-case "${host_cpu}" in
-m68k)
- case "${host_vendor}" in
- att) gdb_host=3b1 ;;
- altos)
- case "${host_os}" in
- gas) gdb_host=altosgas ;;
- *) gdb_host=altos ;;
- esac
- ;;
- hp)
- case ${host_os} in
- hpux) gdb_host=hp300hpux ;;
- bsd) gdb_host=hp300bsd ;;
- esac
- ;;
-
- isi) gdb_host=isi ;;
- sony) gdb_host=news ;;
- sun)
- case "${host_os}" in
- sunos3) gdb_host=sun3os3 ;;
- sunos4) gdb_host=sun3os4 ;;
- *) gdb_host=sun3 ;;
- esac
- ;;
- esac
- ;;
-
-m68000)
- case "${host_vendor}" in
- sun)
- case "${host_os}" in
- sunos3) gdb_host=sun2os3 ;;
- sunos4) gdb_host=sun2os4 ;;
- *) gdb_host=sun2 ;;
- esac
- esac
- ;;
-
-sparc)
- case "${host_os}" in
- sunos3) gdb_host=sun4os3 ;;
- sunos4) gdb_host=sun4os4 ;;
- *) gdb_host=sun4 ;;
- esac
- ;;
-
-m68030)
- case "${host_vendor}" in
- sony) gdb_host=news1000 ;;
- esac
- ;;
-
-mips)
- case "${host_vendor}" in
- sony) gdb_host=bigmips ;;
- dec) gdb_host=dec3100 ;;
- little) gdb_host=littlemips ;;
- sgi) gdb_host=irix3 ;;
- esac
- ;;
-
-i386)
- case "${host_vendor}" in
- sun) gdb_host=sun386 ;;
- sco) gdb_host=i386sco ;;
- sequent) gdb_host=symmetry ;;
- *)
- case "${host_os}" in
- sysv) gdb_host=i386v ;;
- sysv32) gdb_host=i386v32 ;;
- esac
- ;;
- esac
- ;;
-
-c1 | c2) gdb_host=convex ;;
-
-ns32k)
- case "${host_vendor}" in
- umax) gdb_host=umax ;;
- esac
- ;;
-
-romp)
- gdb_host=rtbsd
- ;;
-
-a29k)
- gdb_host=ultra3
- ;;
-
-arm | vax | m88k | merlin | none | np1 | pn | pyramid | tahoe)
- gdb_host=${host_cpu}
- ;;
-
-### unhandled hosts
-#altosgas
-#i386v-g
-#i386v32-g
+if test "${enable_netrom}" = "yes"; then
+ ENABLE_OBS="${ENABLE_OBS} remote-nrom.o"
+fi
+# start-sanitize-gdbtk
+ENABLE_GDBTK=
+
+# Check whether --enable-gdbtk or --disable-gdbtk was given.
+enableval="$enable_gdbtk"
+if test -n "$enableval"; then
+ case "${enableval}" in
+yes) enable_gdbtk=yes ;;
+no) enable_gdbtk=no ;;
+*) { echo "configure: error: bad value ${enableval} given for gdbtk option" 1>&2; exit 1; } ;;
esac
+fi
+
+
+if test "${enable_gdbtk}" = "yes"; then
+ # If we find X, set shell vars x_includes and x_libraries to the
+# paths, otherwise set no_x=yes.
+# Uses ac_ vars as temps to allow command line to override cache and checks.
+# --without-x overrides everything else, but does not touch the cache.
+echo $ac_n "checking for X""... $ac_c" 1>&6
+
+# Check whether --with-x or --without-x was given.
+withval="$with_x"
+if test -n "$withval"; then
+ :
+fi
+
+if test "x$with_x" = xno; then
+ no_x=yes
+else
+ if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
+ no_x=
+ else
+if eval "test \"`echo '$''{'ac_cv_path_x'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # One or both of the vars are not set, and there is no cached value.
+no_x=yes
+rm -fr conftestdir
+if mkdir conftestdir; then
+ cd conftestdir
+ # Make sure to not put "make" in the Imakefile rules, since we grep it out.
+ cat > Imakefile <<'EOF'
+acfindx:
+ @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
+EOF
+ if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
+ no_x=
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+ eval `make acfindx 2>/dev/null | grep -v make`
+ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
+ if test ! -f $ac_im_usrlibdir/libX11.a && test -f $ac_im_libdir/libX11.a
+ then
+ ac_im_usrlibdir=$ac_im_libdir
+ fi
+ # Screen out bogus values from the imake configuration.
+ case "$ac_im_incroot" in
+ /usr/include) ;;
+ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
+ esac
+ case "$ac_im_usrlibdir" in
+ /usr/lib | /lib) ;;
+ *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
+ esac
+ fi
+ cd ..
+ rm -fr conftestdir
+fi
+
+if test "$no_x" = yes; then
+test -z "$x_direct_test_library" && x_direct_test_library=Xt
+test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
+test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
+cat > conftest.$ac_ext <<EOF
+#line 941 "configure"
+#include "confdefs.h"
+#include <$x_direct_test_include>
+EOF
+eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ no_x= ac_x_includes=
+else
+ echo "$ac_err" >&5
+ rm -rf conftest*
+ for ac_dir in \
+ /usr/X11R6/include \
+ /usr/X11R5/include \
+ /usr/X11R4/include \
+ \
+ /usr/include/X11R6 \
+ /usr/include/X11R5 \
+ /usr/include/X11R4 \
+ \
+ /usr/local/X11R6/include \
+ /usr/local/X11R5/include \
+ /usr/local/X11R4/include \
+ \
+ /usr/local/include/X11R6 \
+ /usr/local/include/X11R5 \
+ /usr/local/include/X11R4 \
+ \
+ /usr/X11/include \
+ /usr/include/X11 \
+ /usr/local/X11/include \
+ /usr/local/include/X11 \
+ \
+ /usr/X386/include \
+ /usr/x386/include \
+ /usr/XFree86/include/X11 \
+ \
+ /usr/include \
+ /usr/local/include \
+ /usr/unsupported/include \
+ /usr/athena/include \
+ /usr/local/x11r5/include \
+ /usr/lpp/Xamples/include \
+ \
+ /usr/openwin/include \
+ /usr/openwin/share/include \
+ ; \
+ do
+ if test -r "$ac_dir/$x_direct_test_include"; then
+ no_x= ac_x_includes=$ac_dir
+ break
+ fi
+ done
+fi
+rm -f conftest*
+
+# Check for the libraries.
+# See if we find them without any special options.
+# Don't add to $LIBS permanently.
+ac_save_LIBS="$LIBS"
+LIBS="-l$x_direct_test_library $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 1004 "configure"
+#include "confdefs.h"
+
+int main() { return 0; }
+int t() {
+${x_direct_test_function}()
+; return 0; }
+EOF
+if eval $ac_link; then
+ rm -rf conftest*
+ LIBS="$ac_save_LIBS" no_x= ac_x_libraries=
+else
+ rm -rf conftest*
+ LIBS="$ac_save_LIBS"
+# First see if replacing the include by lib works.
+for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
+ /usr/X11R6/lib \
+ /usr/X11R5/lib \
+ /usr/X11R4/lib \
+ \
+ /usr/lib/X11R6 \
+ /usr/lib/X11R5 \
+ /usr/lib/X11R4 \
+ \
+ /usr/local/X11R6/lib \
+ /usr/local/X11R5/lib \
+ /usr/local/X11R4/lib \
+ \
+ /usr/local/lib/X11R6 \
+ /usr/local/lib/X11R5 \
+ /usr/local/lib/X11R4 \
+ \
+ /usr/X11/lib \
+ /usr/lib/X11 \
+ /usr/local/X11/lib \
+ /usr/local/lib/X11 \
+ \
+ /usr/X386/lib \
+ /usr/x386/lib \
+ /usr/XFree86/lib/X11 \
+ \
+ /usr/lib \
+ /usr/local/lib \
+ /usr/unsupported/lib \
+ /usr/athena/lib \
+ /usr/local/x11r5/lib \
+ /usr/lpp/Xamples/lib \
+ \
+ /usr/openwin/lib \
+ /usr/openwin/share/lib \
+ ; \
+do
+ for ac_extension in a so sl; do
+ if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
+ no_x= ac_x_libraries=$ac_dir
+ break 2
+ fi
+ done
+done
+fi
+rm -f conftest*
-if [ ! -f xconfig/${gdb_host} ]; then
- echo '***' "Gdb does not support host ${host}" 1>&2
- exit 1
+fi
+if test "$no_x" = yes; then
+ ac_cv_path_x="no_x=yes"
+else
+ ac_cv_path_x="no_x= ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
+fi
+fi
+ fi
+ eval "$ac_cv_path_x"
+fi # $with_x != no
+
+if test "$no_x" = yes; then
+ echo "$ac_t""no" 1>&6
+else
+ test "x$x_includes" = xNONE && x_includes=$ac_x_includes
+ test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
+ ac_cv_path_x="no_x= ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
+ echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
fi
-# We really shouldn't depend on there being a space after XM_FILE= ...
-hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <xconfig/${gdb_host}`
+ if test "$no_x" = yes; then
+ # Not all programs may use this symbol, but it does not hurt to define it.
+ X_CFLAGS="$X_CFLAGS -DX_DISPLAY_MISSING"
+else
+ if test -n "$x_includes"; then
+ X_CFLAGS="$X_CFLAGS -I$x_includes"
+ fi
+
+ # It would be nice to have a more robust check for the -R ld option than
+ # just checking for Solaris.
+ # It would also be nice to do this for all -L options, not just this one.
+ if test -n "$x_libraries"; then
+ X_LIBS="$X_LIBS -L$x_libraries"
+ if test "`(uname) 2>/dev/null`" = SunOS &&
+ uname -r | grep '^5' >/dev/null; then
+ X_LIBS="$X_LIBS -R$x_libraries"
+ fi
+ fi
+
+ # Check for libraries that X11R6 Xt/Xaw programs need.
+
+ ac_save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -L$x_libraries"
+ # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
+ # check for ICE first), but we must link in the order -lSM -lICE or
+ # we get undefined symbols. So assume we have SM if we have ICE.
+ # These have to be linked with before -lX11, unlike the other
+ # libraries we check for below, so use a different variable.
+ # --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
+ echo $ac_n "checking for -lICE""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_lib_ICE'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lICE $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 1122 "configure"
+#include "confdefs.h"
+
+int main() { return 0; }
+int t() {
+IceConnectionNumber()
+; return 0; }
+EOF
+if eval $ac_link; then
+ rm -rf conftest*
+ eval "ac_cv_lib_ICE=yes"
+else
+ rm -rf conftest*
+ eval "ac_cv_lib_ICE=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
-## end of per-host part.
+fi
+if eval "test \"`echo '$ac_cv_lib_'ICE`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
+else
+ echo "$ac_t""no" 1>&6
+fi
- for target in ${targets} ; do
+ LDFLAGS="$ac_save_LDFLAGS"
+
+ # Check for system-dependent libraries X programs must link with.
+
+ if test "$ISC" = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
+ else
+ # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X
+ # libraries were built with DECnet support. And karl@cs.umb.edu says
+ # the Alpha needs dnet_stub (dnet does not exist).
+ echo $ac_n "checking for -ldnet""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_lib_dnet'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldnet $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 1165 "configure"
+#include "confdefs.h"
+
+int main() { return 0; }
+int t() {
+dnet_ntoa()
+; return 0; }
+EOF
+if eval $ac_link; then
+ rm -rf conftest*
+ eval "ac_cv_lib_dnet=yes"
+else
+ rm -rf conftest*
+ eval "ac_cv_lib_dnet=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
- target_alias=${target}
- result=`/bin/sh ./config.sub ${target}`
- target_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
- target_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
- target_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
- target=${target_cpu}-${target_vendor}-${target_os}
- target_makefile_frag=config/tmake-${target}
+fi
+if eval "test \"`echo '$ac_cv_lib_'dnet`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
+else
+ echo "$ac_t""no" 1>&6
+fi
-#### configure.in per-target parts come in here.
+ if test $ac_cv_lib_dnet = no; then
+ echo $ac_n "checking for -ldnet_stub""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_lib_dnet_stub'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldnet_stub $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 1199 "configure"
+#include "confdefs.h"
+
+int main() { return 0; }
+int t() {
+dnet_ntoa()
+; return 0; }
+EOF
+if eval $ac_link; then
+ rm -rf conftest*
+ eval "ac_cv_lib_dnet_stub=yes"
+else
+ rm -rf conftest*
+ eval "ac_cv_lib_dnet_stub=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'dnet_stub`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
+ # to get the SysV transport functions.
+ # Not sure which flavor of 386 UNIX this is, but it seems harmless to
+ # check for it.
+ echo $ac_n "checking for -lnsl""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_lib_nsl'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lnsl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 1238 "configure"
+#include "confdefs.h"
+
+int main() { return 0; }
+int t() {
+t_accept()
+; return 0; }
+EOF
+if eval $ac_link; then
+ rm -rf conftest*
+ eval "ac_cv_lib_nsl=yes"
+else
+ rm -rf conftest*
+ eval "ac_cv_lib_nsl=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'nsl`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+ # lieder@skyler.mavd.honeywell.com says without -lsocket,
+ # socket/setsockopt and other routines are undefined under SCO ODT 2.0.
+ # But -lsocket is broken on IRIX, according to simon@lia.di.epfl.ch.
+ if test "`(uname) 2>/dev/null`" != IRIX; then
+ echo $ac_n "checking for -lsocket""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_lib_socket'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lsocket $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 1276 "configure"
+#include "confdefs.h"
+
+int main() { return 0; }
+int t() {
+socket()
+; return 0; }
+EOF
+if eval $ac_link; then
+ rm -rf conftest*
+ eval "ac_cv_lib_socket=yes"
+else
+ rm -rf conftest*
+ eval "ac_cv_lib_socket=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'socket`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lsocket"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ fi
+fi
-case "${target_cpu}" in
-m68k)
- case "${target_vendor}" in
- att) gdb_target=3b1 ;;
- altos) gdb_target=altos ;;
- hp)
- case "${target_os}" in
- bsd) gdb_target=hp300bsd ;;
- hpux) gdb_target=hp300hpux ;;
- esac
- ;;
- sun)
- case "${target_os}" in
- sunos3) gdb_target=sun3os3 ;;
- sunos4) gdb_target=sun3os4 ;;
- *) gdb_target=sun3 ;;
- esac
- ;;
- wrs) gdb_target=vxworks68 ;;
- isi) gdb_target=isi ;;
- sony) gdb_target=news ;;
- esac
- ;;
-
-m68000)
- case "${target_vendor}" in
- sun)
- case "${target_os}" in
- sunos3) gdb_target=sun2os3 ;;
- sunos4) gdb_target=sun2os4 ;;
- *) gdb_target=sun2 ;;
- esac
- esac
- ;;
-
-m68030)
- case "${target_vendor}" in
- sony) gdb_target=news1000 ;;
- esac
- ;;
-
-none | arm | tahoe | vax | np1 | pn | np1 | pn | pyramid | merlin | m88k)
- gdb_target=${target_cpu} ;;
-
-a29k)
- case "${target_os}" in
- none|aout|coff) gdb_target=a29k ;;
- sym1) gdb_target=ultra3 ;;
- kern) gdb_target=a29k-kern ;;
- esac
- ;;
-mips)
- case "${target_vendor}" in
- sony) gdb_target=bigmips ;;
- dec) gdb_target=dec3100 ;;
- little) gdb_target=littlemips ;;
- sgi) gdb_target=irix3 ;;
- esac
- ;;
-
-c1 | c2) gdb_target=convex ;;
-
-sparc)
- case "${target_vendor}" in
- sun)
- case "${target_os}" in
- sunos3) gdb_target=sun4os3 ;;
- sunos4) gdb_target=sun4os4 ;;
- *) gdb_target=sun4 ;;
- esac
- ;;
- esac
- ;;
-
-
-i386)
- case "${target_vendor}" in
- sco) gdb_target=i386sco ;;
- sun) gdb_target=sun386 ;;
- sequent) gdb_target=symmetry ;;
- coff) gdb_target=i386v ;;
- aout) gdb_target=i386v ;;
- *)
- case "${target_os}" in
- sysv) gdb_target=i386v ;;
- sysv32) gdb_target=i386v32 ;;
- esac
- esac
- ;;
-
-i960)
- case "${target_vendor}" in
- bout | wrs) gdb_target=vxworks960 ;;
- coff | intel) gdb_target=nindy960 ;;
- esac
- ;;
-
-ns32k)
- case "${target_vendor}" in
- utek) gdb_target=umax ;;
- esac
- ;;
-
-### unhandled targets
-# altosgas
-# i386v-g
-# i386v32-g
+#
+# Ok, lets find the tk source trees so we can use the headers
+# If the directory (presumably symlink) named "tk" exists, use that one
+# in preference to any others. Same logic is used when choosing library
+# and again with Tcl.
+#
+echo "checking for Tk source directory" 1>&6
+TKHDIR=""
+for i in `ls -d ${srcdir}/../tk* 2>/dev/null` ${srcdir}/../tk ; do
+ if test -f $i/tk.h ; then
+ TKHDIR="-I$i"
+ fi
+done
+# if we can't find it, see if one is installed
+if test x"$TKHDIR" = x ; then
+ installed=0
+ if test -f $prefix/include/tk.h; then
+ installed=1 TKHDIR="-I$prefix/include"
+ else
+ ac_safe=`echo "tk.h" | tr './\055' '___'`
+echo $ac_n "checking for tk.h""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1333 "configure"
+#include "confdefs.h"
+#include <tk.h>
+EOF
+eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ installed=1
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test $installed -eq 0 ; then
+ TKHDIR="# no Tk directory found"
+ echo "configure: warning: Can't find Tk directory" 1>&2
+ fi
+fi
+if test x"$TKHDIR" != x ; then
+ echo "$ac_t""Setting TKHDIR to be $i" 1>&6
+fi
+
+#
+# Ok, lets find the tk library
+# First, look for one uninstalled.
+#
+TKLIB=""
+echo "checking for Tk library" 1>&6
+for i in `ls -d ../tk* 2>/dev/null` ../tk ; do
+ if test -f "$i/Makefile" ; then
+ TKLIB=$i/libtk.a
+ fi
+done
+# If not found, look for installed version
+if test x"$TKLIB" = x ; then
+ if test -f $prefix/lib/libtk.a; then
+ installed=1
+ else
+ installed=0
+ fi
+ if test $installed -eq 1 ; then
+ TKLIB="-ltk"
+ fi
+fi
+
+# If still not found, assume Tk simply hasn't been built yet
+if test x"$TKLIB" = x ; then
+ for i in `ls -d ../tk* 2>/dev/null` ../tk ; do
+ if test -f "$i/tk.h" ; then
+ TKLIB=$i/libtk.a
+ fi
+ done
+fi
+
+if test x"$TKLIB" = x ; then
+ TKLIB="# no Tk library found"
+ echo "configure: warning: Can't find Tk library" 1>&2
+else
+ echo "$ac_t""setting TKLIB to be $TKLIB" 1>&6
+ no_tk=
+fi
+
+
+
+
+
+#
+# Ok, lets find the tcl source trees so we can use the headers
+#
+# Warning: transition of version 9 to 10 will break this algorithm
+# because 10 sorts before 9.
+#
+echo "checking for Tcl source directory" 1>&6
+TCLHDIR=""
+for i in `ls -d ${srcdir}/../tcl* 2>/dev/null` ${srcdir}/../tcl ; do
+ if test -f $i/tclInt.h ; then
+ TCLHDIR="-I$i"
+ fi
+done
+# if we can't find it, see if one is installed
+if test x"$TCLHDIR" = x ; then
+ installed=0
+ if test -f $prefix/include/tclInt.h; then
+ installed=1 TCLHDIR="-I$prefix/include"
+ else
+ ac_safe=`echo "tclInt.h" | tr './\055' '___'`
+echo $ac_n "checking for tclInt.h""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1435 "configure"
+#include "confdefs.h"
+#include <tclInt.h>
+EOF
+eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ installed=1
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test $installed -eq 0 ; then
+ TCLHDIR="# no Tcl directory found"
+ echo "configure: warning: Can't find Tcl directory" 1>&2
+ fi
+else
+ echo "$ac_t""setting TCLHDIR to be $i" 1>&6
+fi
+
+#
+# Ok, lets find the tcl library
+# First, look for the latest uninstalled
+#
+TCLLIB=""
+echo "checking for Tcl library" 1>&6
+for i in `ls -d ../tcl* 2>/dev/null` ../tcl ; do
+ if test -f "$i/Makefile" ; then
+ TCLLIB=$i/libtcl.a
+ fi
+done
+# If not found, look for installed version
+if test x"$TCLLIB" = x ; then
+ if test -f $prefix/lib/libtcl.a; then installed=1; else installed=0; fi
+ if test $installed -eq 1 ; then
+ TCLLIB="-ltcl"
+ fi
+fi
+# If still not found, assume Tcl simply hasn't been built yet
+if test x"$TCLLIB" = x ; then
+ for i in `ls -d ../tcl* 2>/dev/null` ../tcl ; do
+ if test -f "$i/tcl.h" ; then
+ TCLLIB=$i/libtcl.a
+ fi
+ done
+fi
+
+if test x"$TCLLIB" = x ; then
+ TCLLIB="# no Tcl library found"
+ echo "configure: warning: Can't find Tcl library" 1>&2
+else
+ echo "$ac_t""setting TCLLIB to be $TCLLIB" 1>&6
+fi
+
+
+
+
+
+ ENABLE_GDBTK=1
+ ENABLE_CLIBS="${ENABLE_CLIBS} $(TCL) $(TK) $(X11) -lm"
+ ENABLE_OBS="${ENABLE_OBS} gdbtk.o"
+fi
+
+# end-sanitize-gdbtk
+
+
+
+
+
+
+configdirs="doc testsuite"
+
+
+# Map host cpu into the config cpu subdirectory name.
+# The default is $host_cpu.
+
+case "${host_cpu}" in
+
+c[12]) gdb_host_cpu=convex ;;
+hppa*) gdb_host_cpu=pa ;;
+i[345]86) gdb_host_cpu=i386 ;;
+m68*) gdb_host_cpu=m68k ;;
+m88*) gdb_host_cpu=m88k ;;
+np1) gdb_host_cpu=gould ;;
+pyramid) gdb_host_cpu=pyr ;;
+powerpc*) gdb_host_cpu=powerpc ;;
+*) gdb_host_cpu=$host_cpu ;;
+
+esac
+
+# map host info into gdb names.
+
+case "${host}" in
+
+a29k-*-*) gdb_host=ultra3 ;;
+
+alpha-*-osf1*) gdb_host=alpha-osf1 ;;
+alpha-*-osf[23456789]*) gdb_host=alpha-osf2 ;;
+
+arm-*-*) gdb_host=arm ;;
+
+c[12]-*-*) gdb_host=convex ;;
+
+hppa*-*-bsd*) gdb_host=hppabsd ;;
+hppa*-*-hiux*) gdb_host=hppahpux ;;
+hppa*-*-hpux*) gdb_host=hppahpux ;;
+hppa*-*-osf*) gdb_host=hppaosf ;;
+
+i[345]86-ncr-*) gdb_host=ncr3000 ;;
+i[345]86-sequent-bsd*) gdb_host=symmetry ;; # dynix
+i[345]86-sequent-sysv4*) gdb_host=ptx4 ;;
+i[345]86-sequent-sysv*) gdb_host=ptx ;;
+i[345]86-*-aix*) gdb_host=i386aix ;;
+i[345]86-*-bsd*) gdb_host=i386bsd ;;
+i[345]86-*-freebsd*) gdb_host=fbsd ;;
+i[345]86-*-netbsd*) gdb_host=nbsd ;;
+i[345]86-*-go32*) gdb_host=go32 ;;
+i[345]86-*-linux*) gdb_host=linux ;;
+i[345]86-*-lynxos*) gdb_host=i386lynx ;;
+i[345]86-*-mach3*) gdb_host=i386m3 ;;
+i[345]86-*-mach*) gdb_host=i386mach ;;
+i[345]86-*-osf1mk*) gdb_host=osf1mk ;;
+i[345]86-*-sco3.2v4*) gdb_host=i386sco4 ;;
+i[345]86-*-sco*) gdb_host=i386sco ;;
+i[345]86-*-solaris*) gdb_host=i386sol2 ;;
+i[345]86-*-sunos*) gdb_host=sun386 ;;
+i[345]86-*-sysv3.2*) gdb_host=i386v32 ;;
+i[345]86-*-sysv32*) gdb_host=i386v32 ;;
+i[345]86-*-sysv4*) gdb_host=i386v4 ;;
+i[345]86-*-unixware) gdb_host=i386v4 ;;
+i[345]86-*-sysv*) gdb_host=i386v ;;
+i[345]86-*-isc*) gdb_host=i386v32 ;;
+i[345]86-*-os9k) gdb_host=i386os9k ;;
+
+m680[01]0-sun-sunos3*) gdb_host=sun2os3 ;;
+m680[01]0-sun-sunos4*) gdb_host=sun2os4 ;;
+m68030-sony-*) gdb_host=news1000 ;;
+
+m68*-altos-*) gdb_host=altos ;;
+m68*-apollo*-sysv*) gdb_host=apollo68v ;;
+m68*-apollo*-bsd*) gdb_host=apollo68b ;;
+m68*-att-*) gdb_host=3b1 ;;
+m68*-bull*-sysv*) gdb_host=dpx2 ;;
+m68*-hp-bsd*) gdb_host=hp300bsd ;;
+m68*-hp-hpux*) gdb_host=hp300hpux ;;
+m68*-isi-*) gdb_host=isi ;;
+m68*-*-lynxos*) gdb_host=m68klynx ;;
+m68*-*-sysv4*) gdb_host=m68kv4 ;;
+m68*-motorola-*) gdb_host=delta68 ;;
+m68*-sony-*) gdb_host=news ;;
+m68*-sun-sunos3*) gdb_host=sun3os3 ;;
+m68*-sun-sunos4*) gdb_host=sun3os4 ;;
+m68*-sun-*) gdb_host=sun3os4 ;;
+
+m88*-harris-cxux*) gdb_host=cxux ;;
+m88*-motorola-sysv4*) gdb_host=delta88v4 ;;
+m88*-motorola-sysv*) gdb_host=delta88 ;;
+m88*-*-mach3*) gdb_host=mach3 ;;
+m88*-*-*) gdb_host=m88k ;;
+
+mips-dec-mach3*) gdb_host=mach3 ;;
+mips-dec-*) gdb_host=decstation ;;
+mips-little-*) gdb_host=littlemips ;;
+mips-sgi-irix3*) gdb_host=irix3 ;;
+mips-sgi-irix4*) gdb_host=irix4 ;;
+mips-sgi-irix5*) gdb_host=irix5 ;;
+mips-sony-*) gdb_host=news-mips ;;
+mips-*-mach3*) gdb_host=mach3 ;;
+mips-*-sysv4*) gdb_host=mipsv4 ;;
+mips-*-sysv*) gdb_host=riscos ;;
+mips-*-riscos*) gdb_host=riscos ;;
+
+none-*-*) gdb_host=none ;;
+
+np1-*-*) gdb_host=np1 ;;
+
+ns32k-*-mach3*) gdb_host=mach3 ;;
+ns32k-*-netbsd*) gdb_host=nbsd ;;
+ns32k-umax-*) gdb_host=umax ;;
+ns32k-utek-sysv*) gdb_host=merlin ;;
+
+pn-*-*) gdb_host=pn ;;
+
+pyramid-*-*) gdb_host=pyramid ;;
+
+romp-*-*) gdb_host=rtbsd ;;
+
+rs6000-*-lynxos*) gdb_host=rs6000lynx ;;
+rs6000-*-*) gdb_host=rs6000 ;;
+
+sparc-*-lynxos*) gdb_host=sparclynx ;;
+sparc-*-netbsd*) gdb_host=nbsd ;;
+sparc-*-solaris2*) gdb_host=sun4sol2 ;;
+sparc-*-sunos4*) gdb_host=sun4os4 ;;
+sparc-*-sunos5*) gdb_host=sun4sol2 ;;
+sparc-*-*) gdb_host=sun4os4 ;;
+
+tahoe-*-*) gdb_host=tahoe ;;
+
+vax-*-bsd*) gdb_host=vaxbsd ;;
+vax-*-ultrix2*) gdb_host=vaxult2 ;;
+vax-*-ultrix*) gdb_host=vaxult ;;
+
+w65-*-*) gdb_host=w65 ;;
esac
-if [ ! -f tconfig/${gdb_target} ]; then
- echo '***' "Gdb does not support target ${target}" 1>&2
- exit 1
+
+# Map target cpu into the config cpu subdirectory name.
+# The default is $target_cpu.
+
+case "${target_cpu}" in
+
+alpha) gdb_target_cpu=alpha ;;
+c[12]) gdb_target_cpu=convex ;;
+hppa*) gdb_target_cpu=pa ;;
+i[345]86) gdb_target_cpu=i386 ;;
+m68*) gdb_target_cpu=m68k ;;
+m88*) gdb_target_cpu=m88k ;;
+mips*) gdb_target_cpu=mips ;;
+np1) gdb_target_cpu=gould ;;
+powerpc*) gdb_target_cpu=powerpc ;;
+pn) gdb_target_cpu=gould ;;
+pyramid) gdb_target_cpu=pyr ;;
+sparclite*) gdb_target_cpu=sparc
+ configdirs="${configdirs} sparclite" ;;
+sparc*) gdb_target_cpu=sparc ;;
+*) gdb_target_cpu=$target_cpu ;;
+
+esac
+
+# map target info into gdb names.
+
+case "${target}" in
+
+a29k-*-aout*) gdb_target=a29k ;;
+a29k-*-coff*) gdb_target=a29k ;;
+a29k-*-elf*) gdb_target=a29k ;;
+a29k-*-ebmon*) gdb_target=a29k ;;
+a29k-*-kern*) gdb_target=a29k-kern ;;
+a29k-*-none*) gdb_target=a29k ;;
+a29k-*-sym1*) gdb_target=ultra3 ;;
+a29k-*-udi*) gdb_target=a29k-udi ;;
+a29k-*-vxworks*) gdb_target=vx29k ;;
+
+alpha-*-osf*) gdb_target=alpha-osf1 ;;
+
+# start-sanitize-arc
+arc-*-*) gdb_target=arc ;;
+# end-sanitize-arc
+
+arm-*-*) gdb_target=arm ;;
+
+c1-*-*) gdb_target=convex ;;
+c2-*-*) gdb_target=convex ;;
+
+h8300-*-*) gdb_target=h8300hms ;;
+h8500-*-*) gdb_target=h8500hms ;;
+
+sh-*-*) gdb_target=sh ;;
+
+# start-sanitize-r16
+r16-*-*) gdb_target=r16 ;;
+# end-sanitize-r16
+
+hppa*-*-bsd*) gdb_target=hppabsd ;;
+hppa*-*-pro*) gdb_target=hppapro ;;
+hppa*-*-hpux*) gdb_target=hppahpux ;;
+hppa*-*-hiux*) gdb_target=hppahpux ;;
+hppa*-*-osf*) gdb_target=hppaosf ;;
+
+i[345]86-sequent-bsd*) gdb_target=symmetry ;;
+i[345]86-sequent-sysv4*) gdb_target=ptx4 ;;
+i[345]86-sequent-sysv*) gdb_target=ptx ;;
+i[345]86-ncr-*) gdb_target=ncr3000 ;;
+i[345]86-*-aout*) gdb_target=i386aout ;;
+i[345]86-*-coff*) gdb_target=i386v ;;
+i[345]86-*-elf*) gdb_target=i386v ;;
+i[345]86-*-aix*) gdb_target=i386aix ;;
+i[345]86-*-bsd*) gdb_target=i386bsd ;;
+i[345]86-*-freebsd*) gdb_target=fbsd ;;
+i[345]86-*-netbsd*) gdb_target=nbsd ;;
+i[345]86-*-os9k) gdb_target=i386os9k ;;
+i[345]86-*-go32*) gdb_target=i386aout ;;
+i[345]86-*-lynxos*) gdb_target=i386lynx
+ configdirs="${configdirs} gdbserver" ;;
+i[345]86-*-solaris*) gdb_target=i386sol2 ;;
+i[345]86-*-sunos*) gdb_target=sun386 ;;
+i[345]86-*-sysv4*) gdb_target=i386v4 ;;
+i[345]86-*-sco*) gdb_target=i386v ;;
+i[345]86-*-sysv*) gdb_target=i386v ;;
+i[345]86-*-linux*) gdb_target=linux ;;
+i[345]86-*-isc*) gdb_target=i386v ;;
+i[345]86-*-mach3*) gdb_target=i386m3 ;;
+i[345]86-*-mach*) gdb_target=i386mach ;;
+i[345]86-*-netware*) gdb_target=i386nw
+ configdirs="${configdirs} nlm" ;;
+i[345]86-*-osf1mk*) gdb_target=i386mk ;;
+
+i960-*-bout*) gdb_target=vxworks960 ;;
+i960-*-coff*) gdb_target=nindy960 ;;
+i960-*-elf*) gdb_target=nindy960 ;;
+
+i960-*-nindy*) gdb_target=nindy960 ;;
+i960-*-vxworks*) gdb_target=vxworks960 ;;
+
+m68000-*-sunos3*) gdb_target=sun2os3 ;;
+m68000-*-sunos4*) gdb_target=sun2os4 ;;
+
+m68*-apollo*-bsd*) gdb_target=apollo68b ;;
+m68*-bull-sysv*) gdb_target=dpx2 ;;
+m68*-hp-bsd*) gdb_target=hp300bsd ;;
+m68*-hp-hpux*) gdb_target=hp300hpux ;;
+m68*-altos-*) gdb_target=altos ;;
+m68*-att-*) gdb_target=3b1 ;;
+m68*-cisco*-*) gdb_target=cisco ;;
+m68*-ericsson-*) gdb_target=es1800 ;;
+m68*-isi-*) gdb_target=isi ;;
+m68*-motorola-*) gdb_target=delta68 ;;
+m68*-netx-*) gdb_target=vxworks68 ;;
+m68*-sony-*) gdb_target=news ;;
+m68*-tandem-*) gdb_target=st2000 ;;
+m68*-rom68k-*) gdb_target=monitor ;;
+m68*-*bug-*) gdb_target=monitor ;;
+m68*-monitor-*) gdb_target=monitor ;;
+m68*-est-*) gdb_target=est ;;
+m68*-*-aout*) gdb_target=monitor ;;
+m68*-*-coff*) gdb_target=monitor ;;
+m68*-*-elf*) gdb_target=monitor ;;
+m68*-*-lynxos*) gdb_target=m68klynx
+ configdirs="${configdirs} gdbserver" ;;
+m68*-*-os68k*) gdb_target=os68k ;;
+m68*-*-sunos3*) gdb_target=sun3os3 ;;
+m68*-*-sunos4*) gdb_target=sun3os4 ;;
+m68*-*-sysv4*) gdb_target=m68kv4 ;;
+m68*-*-vxworks*) gdb_target=vxworks68 ;;
+
+m88*-harris-cxux*) gdb_target=cxux ;;
+m88*-motorola-sysv4*) gdb_target=delta88v4 ;;
+m88*-*-mach3*) gdb_target=mach3 ;;
+m88*-motorola-*) gdb_target=delta88 ;;
+m88*-*-*) gdb_target=m88k ;;
+
+mips64*-big-*) gdb_target=bigmips64 ;;
+mips*-big-*) gdb_target=bigmips ;;
+mips*-dec-mach3*) gdb_target=mach3 ;;
+mips*-dec-*) gdb_target=decstation ;;
+mips64*el-*-ecoff*) gdb_target=idtl64 ;;
+mips64*-idt-ecoff*) gdb_target=idt64 ;;
+mips64*el-*-elf*) gdb_target=idtl64 ;;
+mips64*-*-elf*) gdb_target=idt64 ;;
+mips*el-*-ecoff*) gdb_target=idtl ;;
+mips*-*-ecoff*) gdb_target=idt ;;
+mips*el-*-elf*) gdb_target=idtl ;;
+mips*-*-elf*) gdb_target=idt ;;
+mips*-little-*) gdb_target=littlemips ;;
+mips*-sgi-irix5*) gdb_target=irix5 ;;
+mips*-sgi-*) gdb_target=irix3 ;;
+mips*-sony-*) gdb_target=bigmips ;;
+mips*-*-mach3*) gdb_target=mach3 ;;
+mips*-*-sysv4*) gdb_target=mipsv4 ;;
+mips*-*-sysv*) gdb_target=bigmips ;;
+mips*-*-riscos*) gdb_target=bigmips ;;
+
+none-*-*) gdb_target=none ;;
+
+np1-*-*) gdb_target=np1 ;;
+
+ns32k-*-mach3*) gdb_target=mach3 ;;
+ns32k-*-netbsd*) gdb_target=nbsd ;;
+ns32k-utek-sysv*) gdb_target=merlin ;;
+ns32k-utek-*) gdb_target=umax ;;
+
+pn-*-*) gdb_target=pn ;;
+powerpc-*-netware*) gdb_target=ppc-nw
+ configdirs="${configdirs} nlm" ;;
+
+powerpc-*-eabi*) gdb_target=ppc-eabi
+ configdirs="${configdirs}" ;;
+
+powerpcle-*-eabi*) gdb_target=ppcle-eabi
+ configdirs="${configdirs}" ;;
+
+pyramid-*-*) gdb_target=pyramid ;;
+
+rs6000-*-lynxos*) gdb_target=rs6000lynx ;;
+rs6000-*-*) gdb_target=rs6000 ;;
+
+sparc-*-aout*) gdb_target=sparc-em ;;
+sparc-*-coff*) gdb_target=sparc-em ;;
+sparc-*-elf*) gdb_target=sparc-em ;;
+sparc-*-lynxos*) gdb_target=sparclynx
+ configdirs="${configdirs} gdbserver" ;;
+sparc-*-netbsd*) gdb_target=nbsd ;;
+sparc-*-solaris2*) gdb_target=sun4sol2 ;;
+sparc-*-sunos4*) gdb_target=sun4os4 ;;
+sparc-*-sunos5*) gdb_target=sun4sol2 ;;
+sparc-*-vxworks*) gdb_target=vxsparc ;;
+sparc-*-*) gdb_target=sun4os4 ;;
+sparclite*-*-*) gdb_target=sparclite ;;
+sparc64-*-*) gdb_target=sp64 ;;
+
+tahoe-*-*) gdb_target=tahoe ;;
+
+vax-*-*) gdb_target=vax ;;
+
+w65-*-*) gdb_target=w65 ;;
+
+z8k-*-sim*) gdb_target=z8ksim ;;
+z8k-*-coff*) gdb_target=z8ksim ;;
+
+esac
+
+
+
+host_makefile_frag=${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh
+if test ! -f ${host_makefile_frag}; then
+{ echo "configure: error: "*** Gdb does not support host ${host}"" 1>&2; exit 1; }
+fi
+
+target_makefile_frag=${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt
+if test ! -f ${target_makefile_frag}; then
+{ echo "configure: error: "*** Gdb does not support target ${target}"" 1>&2; exit 1; }
fi
-if [ -z "${removing}" ] ; then
- cat xconfig/${gdb_host} tconfig/${gdb_target} | awk '$1 == "#msg" {
- print substr($0,6)}'
+host_makefile_frag_path=$host_makefile_frag
+target_makefile_frag_path=$target_makefile_frag
+
+
+
+
+
+hostfile=`sed -n '
+s/XM_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
+' ${host_makefile_frag}`
+
+targetfile=`sed -n '
+s/TM_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
+' ${target_makefile_frag}`
+
+# these really aren't orthogonal true/false values of the same condition,
+# but shells are slow enough that I like to reuse the test conditions
+# whenever possible
+if test "${target}" = "${host}"; then
+nativefile=`sed -n '
+s/NAT_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
+' ${host_makefile_frag}`
+else
+# GDBserver is only useful in a "native" enviroment
+configdirs=`echo $configdirs | sed 's/gdbserver//'`
fi
-# We really shouldn't depend on there being a space after TM_FILE= ...
-targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <tconfig/${gdb_target}`
-host_makefile_frag=xconfig/${gdb_host}
-target_makefile_frag=tconfig/${gdb_target}
+# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
+# (NAT_FILE) is not set in config/*/*.m[ht] files, we don't make the
+# corresponding links. But we have to remove the xm.h files and tm.h
+# files anyway, e.g. when switching from "configure host" to
+# "configure none".
-# If hostfile (XM_FILE) and/or targetfile (TM_FILE) is not set in the
-# ?config/* file, we don't make the corresponding links. But we have
-# to remove the xm.h files and tm.h files anyway, e.g. when switching
-# from "configure host" to "configure none".
files=
links=
rm -f xm.h
-if [ "${hostfile}" != "" ]; then
- files="${files} ${hostfile}"
- links="${links} xm.h"
+if test "${hostfile}" != ""; then
+files="${files} config/${gdb_host_cpu}/${hostfile}"
+links="${links} xm.h"
fi
rm -f tm.h
-if [ "${targetfile}" != "" ]; then
- files="${files} ${targetfile}"
- links="${links} tm.h"
-fi
-
-## end of per-target part.
-
- # Temporarily, we support only direct subdir builds.
- hostsubdir=H-${host_alias}
- targetsubdir=T-${target_alias}
-
- if [ -n "${removing}" ] ; then
- if [ -n "${subdirs}" ] ; then
- if [ -d "${hostsubdir}" ] ; then
- rm -rf ${hostsubdir}/${targetsubdir}
-
- if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target- | grep -v Target-independent`" ] ; then
- rm -rf ${hostsubdir}
- fi
- else
- echo Warning: no `pwd`/${hostsubdir} to remove.
- fi
- else
- rm -f ${Makefile} config.status ${links}
- fi
- else
- if [ -n "${subdirs}" ] ; then
- # check for existing status before allowing forced subdirs.
- if [ -f ${Makefile} ] ; then
- echo '***' "${Makefile} already exists in source directory. `pwd` not configured." 1>&2
- exit 1
- fi
-
- if [ ! -d ${hostsubdir} ] ; then mkdir ${hostsubdir} ; fi
- cd ${hostsubdir}
-
- if [ ! -d ${targetsubdir} ] ; then
- if [ -z "${commontargets}" ] ; then
- mkdir ${targetsubdir}
- else
- if [ ! -d Target-independent ] ; then
- mkdir Target-independent
- fi
-
- ${symbolic_link} Target-independent ${targetsubdir}
- fi # if target independent
- fi # if no target dir yet
-
- cd ${targetsubdir}
-
- srcdir=../..
- else
- # if not subdir builds, then make sure none exist.
- if [ -n "`(ls .) 2>&1 | grep Host-`" ] ; then
- echo '***' "Configured subdirs exist. `pwd` not configured." 1>&2
- exit 1
- fi
- fi
-
- # Find the source files, if location was not specified.
- if [ -z "${srcdir}" ] ; then
- srcdirdefaulted=1
- srcdir=.
- if [ -n "${srctrigger}" -a ! -r ${srctrigger} ] ; then
- srcdir=..
- fi
- fi
-
- if [ -n "${srctrigger}" -a ! -r ${srcdir}/${srctrigger} ] ; then
- if [ -z "${srcdirdefaulted}" ] ; then
- echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/${srcdir}" 1>&2
- else
- echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/. or `pwd`/.." 1>&2
- fi
-
- echo '***' \(At least ${srctrigger} is missing.\) 1>&2
- exit 1
- fi
-
- # Set up the list of links to be made.
- # ${links} is the list of link names, and ${files} is the list of names to link to.
-
- # Make the links.
- while [ -n "${files}" ] ; do
- # set file to car of files, files to cdr of files
- set ${files}; file=$1; shift; files=$*
- set ${links}; link=$1; shift; links=$*
-
- if [ ! -r ${srcdir}/${file} ] ; then
- echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
- echo '***' "since the file \"${file}\" does not exist." 1>&2
- exit 1
- fi
-
- ${remove} -f ${link}
- rm -f config.status
- # Make a symlink if possible, otherwise try a hard link
- ${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link}
-
- if [ ! -r ${link} ] ; then
- echo '***' "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
- exit 1
- fi
-
- if [ -n "${verbose}" ] ; then
- echo "Linked \"${link}\" to \"${srcdir}/${file}\"."
- fi
- done
-
- # Create a .gdbinit file which runs the one in srcdir
- # and tells GDB to look there for source files.
-
- case ${srcdir} in
- .)
- ;;
- *)
- echo "dir ." > .gdbinit
- echo "dir ${srcdir}" >> .gdbinit
- echo "source ${srcdir}/.gdbinit" >> .gdbinit
- ;;
- esac
-
- # Install a makefile, and make it set VPATH
- # if necessary so that the sources are found.
- # Also change its value of srcdir.
-
- # FIXME-someday: This business of always writing to .tem and mv back
- # is so that I don't screw things up while developing. Once this
- # template is stable, these should be optimized. xoxorich.
-
- # Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
- if [ "${host}" != "${target}" ] ; then
- echo "CROSS=-DCROSS_COMPILE" > ${Makefile}
- echo "ALL=start.encap" >> ${Makefile}
- else
- echo "ALL=all.internal" > ${Makefile}
- fi
-
- # set target, host, VPATH
- echo "host_alias = ${host_alias}" >> ${Makefile}
- echo "host_cpu = ${host_cpu}" >> ${Makefile}
- echo "host_vendor = ${host_vendor}" >> ${Makefile}
- echo "host_os = ${host_os}" >> ${Makefile}
-
- echo "target_alias = ${target_alias}" >> ${Makefile}
- echo "target_cpu = ${target_cpu}" >> ${Makefile}
- echo "target_vendor = ${target_vendor}" >> ${Makefile}
- echo "target_os = ${target_os}" >> ${Makefile}
-
- if [ -n "${subdirs}" ] ; then
- echo "subdir = /${hostsubdir}/${targetsubdir}" >> ${Makefile}
- else
- echo "subdir =" >> ${Makefile}
- fi
-
- # echo "workdir = `pwd`" >> ${Makefile}
- echo "VPATH = ${srcdir}" >> ${Makefile}
-
- # add "Makefile.in" (or whatever it's called)
- cat ${srcdir}/${Makefile_in} >> ${Makefile}
-
- # Conditionalize the makefile for this host.
- if [ -f ${srcdir}/${host_makefile_frag} ] ; then
- (echo "host_makefile_frag = ${srcdir}/${host_makefile_frag}" ;
- sed -e "/^####/ r ${srcdir}/${host_makefile_frag}" ${Makefile}) > Makefile.tem
- mv Makefile.tem ${Makefile}
- fi
-
- # Conditionalize the makefile for this target.
- if [ -f ${srcdir}/${target_makefile_frag} ] ; then
- (echo "target_makefile_frag = ${srcdir}/${target_makefile_frag}" ;
- sed -e "/^####/ r ${srcdir}/${target_makefile_frag}" ${Makefile}) > Makefile.tem
- mv Makefile.tem ${Makefile}
- fi
-
- # set srcdir
- sed "s@^srcdir = \.@srcdir = ${srcdir}@" ${Makefile} > Makefile.tem
- mv Makefile.tem ${Makefile}
-
- # set destdir
- if [ -n "${destdir}" ] ; then
- sed "s:^destdir =.*$:destdir = ${destdir}:" ${Makefile} > Makefile.tem
- mv Makefile.tem ${Makefile}
- fi
-
- # reset SUBDIRS
- sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" ${Makefile} > Makefile.tem
- mv Makefile.tem ${Makefile}
-
- # reset NONSUBDIRS
- sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" ${Makefile} > Makefile.tem
- mv Makefile.tem ${Makefile}
-
- using=
- if [ -f ${srcdir}/${host_makefile_frag} ] ; then
- using=" using \"${host_makefile_frag}\""
- fi
-
- # remove any form feeds.
- sed -e "s/\f//" ${Makefile} > Makefile.tem
- mv Makefile.tem ${Makefile}
-
- if [ -f ${srcdir}/${target_makefile_frag} ] ; then
- if [ -z "${using}" ] ; then
- andusing=" using \"${target_makefile_frag}\""
- else
- andusing="${using} and \"${target_makefile_frag}\""
- fi
- else
- andusing=${using}
- fi
-
- if [ -n "${verbose}" -o -z "${recurring}" ] ; then
- echo "Created \"${Makefile}\"" in `pwd`${andusing}.
- fi
-
-#### configure.in post-target parts come in here.
+if test "${targetfile}" != ""; then
+files="${files} config/${gdb_target_cpu}/${targetfile}"
+links="${links} tm.h"
+fi
+rm -f nm.h
+if test "${nativefile}" != ""; then
+files="${files} config/${gdb_host_cpu}/${nativefile}"
+links="${links} nm.h"
+else
+# A cross-only configuration.
+files="${files} config/nm-empty.h"
+links="${links} nm.h"
+fi
+# start-sanitize-gdbtk
-case ${srcdir} in
- .)
- ;;
- *)
- grep -s "source ${srcdir}/.gdbinit" .gdbinit 2>/dev/null || \
- echo "source ${srcdir}/.gdbinit" >> .gdbinit
-esac
+# Make it possible to use the GUI without doing a full install
+if test "${enable_gdbtk}" = "yes" -a ! -f gdbtk.tcl ; then
+files="${files} gdbtk.tcl"
+links="${links} gdbtk.tcl"
+fi
+# end-sanitize-gdbtk
-cat ${srcdir}/alldeps.mak ${srcdir}/depend >>Makefile
-## end of post-target part.
-
- # describe the chosen configuration in config.status.
- # Make that file a shellscript which will reestablish
- # the same configuration. Used in Makefiles to rebuild
- # Makefiles.
-
- echo "#!/bin/sh
-# ${srcname} was configured as follows:
-${srcdir}/configure" ${arguments} `if [ -z "${norecursion}" ] ; then echo +norecursion ; else true ; fi` > config.status
- chmod a+x config.status
-
- originaldir=`pwd`
- cd ${srcdir}
- fi
-
- # If there are subdirectories, then recurse.
- if [ -z "${norecursion}" -a -n "${configdirs}" ] ; then
- for configdir in ${configdirs} ; do
- if [ -n "${verbose}" ] ; then
- echo Configuring ${configdir}...
- fi
-
- if [ -d ${configdir} ] ; then
- (cd ${configdir} ;
- ./configure +recurring ${host_alias} +target=${target_alias} \
- ${verbose} ${subdirs} ${removing} +destdir=${destdir}) \
- | sed 's/^/ /'
- else
- if [ -n "${verbose}" ] ; then
- echo Warning: directory \"${configdir}\" is missing.
- fi
- fi
- done
- fi
- done # for each target
-
- # Now build a Makefile for this host.
- if [ -n "${subdirs}" -a ! -n "${removing}" ] ; then
- cd ${hostsubdir}
- cat > GNUmakefile << E!O!F
-# Makefile generated by configure for host ${host_alias}.
-
-ALL := $(shell ls -d Target-*)
-
-%:
- $(foreach subdir,$(ALL),$(MAKE) -C $(subdir) \$@ &&) true
-
-all:
-E!O!F
- cd ..
- fi
-done # for each host
-exit 0
+subdirs="$configdirs"
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
#
-# Local Variables:
-# fill-column: 131
-# End:
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
#
+EOF
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
+ >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) \(.*\)%-D\1=\2%g
+s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+ case "\$ac_option" in
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+ exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+ -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+ echo "$CONFIG_STATUS generated by autoconf version 2.3"
+ exit 0 ;;
+ -help | --help | --hel | --he | --h)
+ echo "\$ac_cs_usage"; exit 0 ;;
+ *) echo "\$ac_cs_usage"; exit 1 ;;
+ esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF
+$ac_vpsub
+$extrasub
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@CC@%$CC%g
+s%@CPP@%$CPP%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@RANLIB@%$RANLIB%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@X_CFLAGS@%$X_CFLAGS%g
+s%@X_PRE_LIBS@%$X_PRE_LIBS%g
+s%@X_LIBS@%$X_LIBS%g
+s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g
+s%@TKHDIR@%$TKHDIR%g
+s%@TKLIB@%$TKLIB%g
+s%@TCLHDIR@%$TCLHDIR%g
+s%@TCLLIB@%$TCLLIB%g
+s%@ENABLE_GDBTK@%$ENABLE_GDBTK%g
+s%@ENABLE_CFLAGS@%$ENABLE_CFLAGS%g
+s%@ENABLE_CLIBS@%$ENABLE_CLIBS%g
+s%@ENABLE_OBS@%$ENABLE_OBS%g
+s%@host_makefile_frag_path@%$host_makefile_frag_path%g
+s%@target_makefile_frag_path@%$target_makefile_frag_path%g
+/@host_makefile_frag@/r $host_makefile_frag
+s%@host_makefile_frag@%%g
+/@target_makefile_frag@/r $target_makefile_frag
+s%@target_makefile_frag@%%g
+s%@subdirs@%$subdirs%g
+
+CEOF
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+ # Support "outfile[:infile]", defaulting infile="outfile.in".
+ case "$ac_file" in
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+ ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ *) ac_file_in="${ac_file}.in" ;;
+ esac
+
+ # Adjust relative srcdir, etc. for subdirectories.
+
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+ # The file is in a subdirectory.
+ test ! -d "$ac_dir" && mkdir "$ac_dir"
+ ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+ else
+ ac_dir_suffix= ac_dots=
+ fi
+
+ case "$ac_given_srcdir" in
+ .) srcdir=.
+ if test -z "$ac_dots"; then top_srcdir=.
+ else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+ /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+ *) # Relative path.
+ srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+ top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ case "$ac_given_INSTALL" in
+ [/$]*) INSTALL="$ac_given_INSTALL" ;;
+ *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+ esac
+ echo creating "$ac_file"
+ rm -f "$ac_file"
+ configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+ case "$ac_file" in
+ *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+ *) ac_comsub= ;;
+ esac
+ sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
+fi; done
+rm -f conftest.subs
+
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+ac_sources="$files"
+ac_dests="$links"
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+srcdir=$ac_given_srcdir
+while test -n "$ac_sources"; do
+ set $ac_dests; ac_dest=$1; shift; ac_dests=$*
+ set $ac_sources; ac_source=$1; shift; ac_sources=$*
+
+ echo "linking $srcdir/$ac_source to $ac_dest"
+
+ if test ! -r $srcdir/$ac_source; then
+ { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
+ fi
+ rm -f $ac_dest
+
+ # Make relative symlinks.
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
+ # The dest file is in a subdirectory.
+ test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
+ ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
+ # A "../" for each directory in $ac_dest_dir_suffix.
+ ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
+ else
+ ac_dest_dir_suffix= ac_dots=
+ fi
+
+ case "$srcdir" in
+ [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
+ *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
+ esac
+
+ # Make a symlink if possible; otherwise try a hard link.
+ if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
+ ln $srcdir/$ac_source $ac_dest; then :
+ else
+ { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
+ fi
+done
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+gdb_host_cpu=$gdb_host_cpu
+gdb_target_cpu=$gdb_target_cpu
+nativefile=$nativefile
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+if test "${nativefile}" = ""; then
+sed -e '/^NATDEPFILES= /s//# NATDEPFILES= /' \
+ < Makefile > Makefile.tem
+mv -f Makefile.tem Makefile
+fi
+
+sed -e '/^TM_FILE[ ]*=/s,^TM_FILE[ ]*=[ ]*,&config/'"${gdb_target_cpu}"'/,
+/^XM_FILE[ ]*=/s,^XM_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,
+/^NAT_FILE[ ]*=/s,^NAT_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,' <Makefile >Makefile.tmp
+mv -f Makefile.tmp Makefile
+
+case ${srcdir} in
+.)
+;;
+*)
+grep "source ${srcdir}/.gdbinit" .gdbinit >/dev/null 2>/dev/null || \
+echo "source ${srcdir}/.gdbinit" >> .gdbinit
+esac
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+if test "$no_recursion" != yes; then
+
+ # Remove --cache-file and --srcdir arguments so they do not pile up.
+ ac_sub_configure_args=
+ ac_prev=
+ for ac_arg in $ac_configure_args; do
+ if test -n "$ac_prev"; then
+ ac_prev=
+ continue
+ fi
+ case "$ac_arg" in
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ ;;
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ ;;
+ *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
+ esac
+ done
+
+ for ac_config_dir in $configdirs; do
+
+ # Do not complain, so a configure script can configure whichever
+ # parts of a large source tree are present.
+ if test ! -d $srcdir/$ac_config_dir; then
+ continue
+ fi
+
+ echo configuring in $ac_config_dir
+
+ case "$srcdir" in
+ .) ;;
+ *)
+ if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
+ else
+ { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
+ fi
+ ;;
+ esac
+
+ ac_popdir=`pwd`
+ cd $ac_config_dir
+
+ case "$srcdir" in
+ .) # No --srcdir option. We are building in place.
+ ac_sub_srcdir=$srcdir ;;
+ /*) # Absolute path.
+ ac_sub_srcdir=$srcdir/$ac_config_dir ;;
+ *) # Relative path.
+ ac_sub_srcdir=../$srcdir/$ac_config_dir ;;
+ esac
+
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f $ac_sub_srcdir/configure; then
+ ac_sub_configure=$ac_sub_srcdir/configure
+ elif test -f $ac_sub_srcdir/configure.in; then
+ ac_sub_configure=$ac_configure
+ else
+ echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
+ ac_sub_configure=
+ fi
+
+ # The recursion is here.
+ if test -n "$ac_sub_configure"; then
+
+ # Make the cache file name correct relative to the subdirectory.
+ # A "../" for each directory in /$ac_config_dir.
+ ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
+ case "$cache_file" in
+ /*) ac_sub_cache_file=$cache_file ;;
+ *) # Relative path.
+ ac_sub_cache_file="$ac_dots$cache_file" ;;
+ esac
+ case "$ac_given_INSTALL" in
+ [/$]*) INSTALL="$ac_given_INSTALL" ;;
+ *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+ esac
+
+ echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
+ # The eval makes quoting arguments work.
+ if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
+ then :
+ else
+ { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
+ fi
+ fi
+
+ cd $ac_popdir
+ done
+fi
-# end of configure
projects / deliverable / binutils-gdb.git / blobdiff