#This file is part of GNU.
-#GNU CC is free software; you can redistribute it and/or modify
-#it under the terms of the GNU General Public License as published by
-#the Free Software Foundation; either version 1, or (at your option)
-#any later version.
-
-#GNU CC is distributed in the hope that it will be useful,
-#but WITHOUT ANY WARRANTY; without even the implied warranty of
-#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#GNU General Public License for more details.
-
-#You should have received a copy of the GNU General Public License
-#along with GNU CC; see the file COPYING. If not, write to
-#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
# $Id$
destdir=
fatal=
hostsubdir=
+Makefile=Makefile
+Makefile_in=Makefile.in
norecurse=
removing=
srcdir=
#### configure.in common parts come in here.
srcname="GDB"
srctrigger=main.c
-
-if [ -z "${template}" ] ; then
- make -f Makefile.dist Makefile.in
-fi
+Makefile=Makefile.conf
## end of common part.
-e '/^#### configure.in per-target parts come in here.$/,/^## end of per-target part.$/c\
#### configure.in per-target parts come in here.\
## end of per-target part.' \
+ -e '/^#### configure.in post-target parts come in here.$/,/^## end of post-target part.$/c\
+#### configure.in post-target parts come in here.\
+## end of post-target part.' \
< ${template} > template.new
if [ -r configure.in ] ; then
exit 1
fi
- # split configure.in into common, per-host, and per-target parts
+ # split configure.in into common, per-host, per-target,
+ # and post-target parts. Post-target is optional.
sed -e '/^# per\-host:/,$d' configure.in > configure.com
sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' configure.in > configure.hst
- sed -e '1,/^# per\-target:/d' configure.in > configure.tgt
+ if grep -s '^# post-target:' configure.in ; then
+ sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' configure.in > configure.tgt
+ sed -e '1,/^# post\-target:/d' configure.in > configure.pos
+ else
+ sed -e '1,/^# per\-target:/d' configure.in > configure.tgt
+ echo >configure.pos
+ fi
# and insert them
sed -e '/^#### configure.in common parts come in here.$/ r configure.com' \
-e '/^#### configure.in per\-host parts come in here.$/ r configure.hst' \
-e '/^#### configure.in per\-target parts come in here.$/ r configure.tgt' \
+ -e '/^#### configure.in post\-target parts come in here.$/ r configure.pos' \
template.new > configure.new
- rm -f configure.com configure.tgt configure.hst
+ rm -f configure.com configure.tgt configure.hst configure.pos
else
echo Warning: no configure.in in `pwd`
cat ${template} >> configure
exit 1
fi
-targetfile=`awk '
- $1 == "XM_FILE=" { print $2 }' <xconfig/$host`
-if [ "${targetfile}" = "/" ] ; then
- targetfile=/dev/null
-fi
+# We really shouldn't depend on there being a space after XM_FILE= ...
+hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <xconfig/$host`
## end of per-host part.
for target in ${targets} ; do
if [ -n "${verbose}" ] ; then
- echo " "target=\"${target}\"
+ echo " target=\"${target}\""
fi
#### configure.in per-target parts come in here.
print substr($0,6)}'
fi
-hostfile=`awk '
- $1 == "TM_FILE=" { print $2 }' <tconfig/$target`
-if [ "${hostfile}" = "/" ] ; then
- hostfile=/dev/null
-fi
-
-if [ ! -d readline ]; then
- mkdir readline
- # This could be a symlink, but getting the name right (because
- # srcdir can be either relative or absolute) would be hairy.
- cp ${srcdir}/readline/Makefile readline
-fi
+# We really shouldn't depend on there being a space after TM_FILE= ...
+targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <tconfig/$target`
host_makefile_frag=xconfig/${host}
target_makefile_frag=tconfig/${target}
-files="${hostfile} ${targetfile}"
-links="xm.h tm.h"
+# If hostfile (XM_FILE) and/or targetfile (TM_FILE) is not set in the
+# ?config/* file, we don't make the corresponding links.
+files=
+links=
+if [ "${hostfile}" != "" ]; then
+ files="${files} ${hostfile}"
+ links="${links} xm.h"
+fi
+if [ "${targetfile}" != "" ]; then
+ files="${files} ${targetfile}"
+ links="${links} tm.h"
+fi
## end of per-target part.
echo Warning: no `pwd`/${hostsubdir} to remove.
fi
else
- rm -f Makefile config.status ${links}
+ rm -f ${Makefile} config.status ${links}
fi
else
if [ -n "${forcesubdirs}" ] ; then
# check for existing status before allowing forced subdirs.
- if [ -f Makefile ] ; then
- echo "Makefile already exists in source directory. `pwd` not configured."
+ if [ -f ${Makefile} ] ; then
+ echo "${Makefile} already exists in source directory. `pwd` not configured."
exit 1
fi
# Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
if [ "${host}" != "${target}" ] ; then
- echo "CROSS=-DCROSS_COMPILE" > Makefile
- echo "ALL=start.encap" >> Makefile
+ echo "CROSS=-DCROSS_COMPILE" > ${Makefile}
+ echo "ALL=start.encap" >> ${Makefile}
else
- echo "ALL=all.internal" > Makefile
+ echo "ALL=all.internal" > ${Makefile}
fi
# set target, host, VPATH
- echo "host = ${host}" >> Makefile
- echo "target = ${target}" >> Makefile
+ echo "host = ${host}" >> ${Makefile}
+ echo "target = ${target}" >> ${Makefile}
if [ -n "${forcesubdirs}" ] ; then
- echo "subdir = /${hostsubdir}/${targetsubdir}" >> Makefile
+ echo "subdir = /${hostsubdir}/${targetsubdir}" >> ${Makefile}
else
- echo "subdir =" >> Makefile
+ echo "subdir =" >> ${Makefile}
fi
- # echo "workdir = `pwd`" >> Makefile
- echo "VPATH = ${srcdir}" >> Makefile
+ # echo "workdir = `pwd`" >> ${Makefile}
+ echo "VPATH = ${srcdir}" >> ${Makefile}
- # add Makefile.in
- cat ${srcdir}/Makefile.in >> Makefile
+ # add "Makefile.in" (or whatever it's called)
+ cat ${srcdir}/${Makefile_in} >> ${Makefile}
# and shake thoroughly.
if [ -z "${host_makefile_frag}" ] ; then
# Conditionalize the makefile for this host.
if [ -f ${srcdir}/${host_makefile_frag} ] ; then
- sed -e "/^####/ r ${srcdir}/${host_makefile_frag}" Makefile > Makefile.tem
- mv Makefile.tem Makefile
+ sed -e "/^####/ r ${srcdir}/${host_makefile_frag}" ${Makefile} > Makefile.tem
+ mv Makefile.tem ${Makefile}
fi
# Conditionalize the makefile for this target.
if [ -f ${srcdir}/${target_makefile_frag} ] ; then
- sed -e "/^####/ r ${srcdir}/${target_makefile_frag}" Makefile > Makefile.tem
- mv Makefile.tem Makefile
+ sed -e "/^####/ r ${srcdir}/${target_makefile_frag}" ${Makefile} > Makefile.tem
+ mv Makefile.tem ${Makefile}
fi
# set srcdir
- sed "s@^srcdir = \.@srcdir = ${srcdir}@" Makefile > Makefile.tem
- mv Makefile.tem Makefile
+ sed "s@^srcdir = \.@srcdir = ${srcdir}@" ${Makefile} > Makefile.tem
+ mv Makefile.tem ${Makefile}
# set destdir
if [ -n "${destdir}" ] ; then
- sed "s:^destdir =.*$:destdir = ${destdir}:" Makefile > Makefile.tem
- mv Makefile.tem Makefile
+ sed "s:^destdir =.*$:destdir = ${destdir}:" ${Makefile} > Makefile.tem
+ mv Makefile.tem ${Makefile}
fi
# Remove all formfeeds, since some Makes get confused by them.
- sed "s/\f//" Makefile >> Makefile.tem
- mv Makefile.tem Makefile
+ sed "s/\f//" ${Makefile} >> Makefile.tem
+ mv Makefile.tem ${Makefile}
# reset SUBDIRS
- sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" Makefile > Makefile.tem
- mv Makefile.tem Makefile
+ sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" ${Makefile} > Makefile.tem
+ mv Makefile.tem ${Makefile}
# reset NONSUBDIRS
- sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" Makefile > Makefile.tem
- mv Makefile.tem Makefile
+ sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" ${Makefile} > Makefile.tem
+ mv Makefile.tem ${Makefile}
using=
if [ -f ${srcdir}/${host_makefile_frag} ] ; then
andusing=${using}
fi
- echo "Created \"Makefile\"" in `pwd`${andusing}.
+ echo "Created \"${Makefile}\"" in `pwd`${andusing}.
+
+#### configure.in post-target parts come in here.
+
+case ${srcdir} in
+ .)
+ ;;
+ *)
+ grep -s "source ${srcdir}/.gdbinit" .gdbinit 2>/dev/null || \
+ echo "source ${srcdir}/.gdbinit" >> .gdbinit
+esac
+
+rm -f Makefile
+if [ ! -f depend ]; then
+ make -f Makefile.conf depend
+fi
+make -f Makefile.conf Makefile
+## end of post-target part.
if [ "${host}" = "${target}" ] ; then
echo "Links are now set up for use with a ${target}." \
#
# $Log$
-# Revision 1.4 1991/05/19 00:16:45 rich
+# Revision 1.7 1991/07/04 15:59:46 gnu
+# Make gdb work with configure. Only thing that doesn't work is the -list
+# option (as far as I know).
+#
+# Revision 1.6 1991/06/04 07:28:16 gnu
+# Change GDB over to GNU General Public License version 2.
+#
+# Revision 1.5 1991/05/19 07:26:54 rich
+# configure changes and -opcode.h movement.
+#
+# Revision 1.4 1991/05/19 00:16:45 rich
# Configure for gdb.
#
# Revision 1.10 1991/05/04 00:58:38 rich
projects / deliverable / binutils-gdb.git / blobdiff