AC_CONFIG_SUBDIRS(doc testsuite)
+# Check whether to support alternative target configurations
+AC_ARG_ENABLE(targets,
+[ --enable-targets alternative target configurations],
+[case "${enableval}" in
+ yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
+ ;;
+ no) enable_targets= ;;
+ *) enable_targets=$enableval ;;
+esac])
+
+# Check whether to enable 64-bit support on 32-bit hosts
+AC_ARG_ENABLE(64-bit-bfd,
+[ --enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)],
+[case "${enableval}" in
+ yes) want64=true ;;
+ no) want64=false ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for 64-bit-bfd option) ;;
+esac],[want64=false])dnl
+
# Provide defaults for some variables set by the per-host and per-target
# configuration.
gdb_host_obs=posix-hdep.o
. $srcdir/configure.host
-. $srcdir/configure.tgt
+# Accumulate some settings from configure.tgt over all enabled targets
+
+TARGET_OBS=
+all_targets=
+
+for targ_alias in `echo $target_alias $enable_targets | sed 's/,/ /g'`
+do
+ if test "$targ_alias" = "all"; then
+ all_targets=true
+ else
+ # Canonicalize the secondary target names.
+ result=`$ac_config_sub $targ_alias 2>/dev/null`
+ if test -n "$result"; then
+ targ=$result
+ else
+ targ=$targ_alias
+ fi
+
+ . ${srcdir}/configure.tgt
+
+ # Target-specific object files
+ for i in ${gdb_target_obs}; do
+ case " $TARGET_OBS " in
+ *" ${i} "*) ;;
+ *)
+ TARGET_OBS="$TARGET_OBS ${i}"
+ ;;
+ esac
+ done
+
+ # Check whether this target needs 64-bit CORE_ADDR
+ if test x${want64} = xfalse; then
+ . ${srcdir}/../bfd/config.bfd
+ fi
+ fi
+done
+
+if test x${all_targets} = xtrue; then
+
+ # We want all 64-bit targets if we either:
+ # - run on a 64-bit host or
+ # - already require 64-bit support for some other target or
+ # - the --enable-64-bit-bfd option was supplied
+ # Otherwise we only support all 32-bit targets.
+ #
+ # NOTE: This test must be in sync with the corresponding
+ # tests in BFD!
+
+ if test x${want64} = xfalse; then
+ AC_CHECK_SIZEOF(long)
+ if test "x${ac_cv_sizeof_long}" = "x8"; then
+ want64=true
+ fi
+ fi
+ if test x${want64} = xtrue; then
+ TARGET_OBS='$(ALL_TARGET_OBS) $(ALL_64_TARGET_OBS)'
+ else
+ TARGET_OBS='$(ALL_TARGET_OBS)'
+ fi
+fi
+
+AC_SUBST(TARGET_OBS)
+
+# For other settings, only the main target counts.
+gdb_sim=
+gdb_osabi=
+build_gdbserver=
+targ=$target; . ${srcdir}/configure.tgt
# Fetch the default architecture and default target vector from BFD.
targ=$target; . $srcdir/../bfd/config.bfd
# a situation.
AC_SEARCH_LIBS(waddstr, [ncurses cursesX curses])
+# On HP/UX we may need libxpdl for dlgetmodinfo (used by solib-pa64.c).
+AC_SEARCH_LIBS(dlgetmodinfo, [dl xpdl])
+
# Since GDB uses Readline, we need termcap functionality. In many
# cases this will be provided by the curses library, but some systems
# have a seperate termcap library, or no curses library at all.
#endif
])
+# Check for HP/UX 64-bit shared library support
+AC_CHECK_HEADERS(elf_hp.h)
+
# FIXME: kettenis/20030102: In most cases we include these
# unconditionally, so what's the point in checking these?
AC_CHECK_HEADERS(ctype.h time.h)
AC_C_CONST
AC_C_INLINE
+AC_C_BIGENDIAN
# ------------------------------ #
# Checks for library functions. #
AC_CACHE_CHECK([types of arguments for ptrace], gdb_cv_func_ptrace_args, [
for gdb_arg1 in 'int' 'long'; do
for gdb_arg2 in 'pid_t' 'int' 'long'; do
- for gdb_arg3 in 'int *' 'caddr_t' 'int' 'long'; do
+ for gdb_arg3 in 'int *' 'caddr_t' 'int' 'long' 'void *'; do
for gdb_arg4 in 'int' 'long'; do
AC_TRY_COMPILE($gdb_ptrace_headers, [
extern $gdb_cv_func_ptrace_ret
[Define if you want to use new multi-fd /proc interface
(replaces HAVE_MULTIPLE_PROC_FDS as well as other macros).])
;;
- *-*-solaris2.[[6789]] | *-*-solaris2.1[[0-9]])
+ *-*-solaris2.[[6789]] | *-*-solaris2.1[[0-9]]*)
AC_DEFINE(NEW_PROC_API, 1,
[Define if you want to use new multi-fd /proc interface
(replaces HAVE_MULTIPLE_PROC_FDS as well as other macros).])
[Define to 1 if the "%ll" format works to print long longs.])
fi
+# Check if the compiler and runtime support printing decfloats.
+
+AC_CACHE_CHECK([for decfloat support in printf],
+ gdb_cv_printf_has_decfloat,
+ [AC_RUN_IFELSE([AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT],
+[[char buf[64];
+ _Decimal32 d32 = 1.2345df;
+ _Decimal64 d64 = 1.2345dd;
+ _Decimal128 d128 = 1.2345dl;
+ sprintf (buf, "Decimal32: %H\nDecimal64: %D\nDecimal128: %DD", d32, d64, d128);
+ return (strcmp ("Decimal32: 1.2345\nDecimal64: 1.2345\nDecimal128: 1.2345", buf));]])],
+ gdb_cv_printf_has_decfloat=yes,
+ gdb_cv_printf_has_decfloat=no,
+ gdb_cv_printf_has_decfloat=no)])
+if test $gdb_cv_printf_has_decfloat = yes; then
+ AC_DEFINE(PRINTF_HAS_DECFLOAT, 1,
+ [Define to 1 if the "%H, %D and %DD" formats work to print decfloats.])
+fi
+
# Check if the compiler supports the `long double' type. We can't use
# AC_C_LONG_DOUBLE because that one does additional checks on the
# constants defined in <float.h> that fail on some systems,
fi
# Unlike the sim directory, whether a simulator is linked is controlled by
-# presence of a SIM= and a SIM_OBS= definition in the target '.mt' file.
+# presence of a gdb_sim definition in the target configure.tgt entry.
# This code just checks for a few cases where we'd like to ignore those
# definitions, even when they're present in the '.mt' file. These cases
# are when --disable-sim is specified, or if the simulator directory is
ignore_sim=true
fi
-if test "${ignore_sim}" = "true"; then
- IGNORE_SIM="SIM="
- IGNORE_SIM_OBS="SIM_OBS="
-else
- IGNORE_SIM=""
- IGNORE_SIM_OBS=""
+SIM=
+SIM_OBS=
+if test "${ignore_sim}" = "false"; then
+ if test x"${gdb_sim}" != x ; then
+ SIM="${gdb_sim}"
+ SIM_OBS="remote-sim.o"
AC_DEFINE(WITH_SIM, 1, [Define if the simulator is being linked in.])
+ fi
fi
-AC_SUBST(IGNORE_SIM)
-AC_SUBST(IGNORE_SIM_OBS)
+AC_SUBST(SIM)
+AC_SUBST(SIM_OBS)
AC_SUBST(ENABLE_CFLAGS)
AC_SUBST(PROFILE_CFLAGS)
host_makefile_frag=/dev/null
fi
-target_makefile_frag=${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt
-if test ! -f ${target_makefile_frag}; then
- AC_MSG_ERROR("*** Gdb does not support target ${target}")
-fi
-frags="$frags $target_makefile_frag"
-
AC_SUBST_FILE(host_makefile_frag)
-AC_SUBST_FILE(target_makefile_frag)
AC_SUBST(frags)
changequote(,)dnl
-hostfile=`sed -n '
-s/XM_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
-' ${host_makefile_frag}`
-
-targetfile=`sed -n '
-s/^[ ]*DEPRECATED_TM_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
-' ${target_makefile_frag}`
-
if test "${gdb_native}" = "yes"; then
# We pick this up from the host configuration file (.mh) because we
# do not have a native configuration Makefile fragment.
fi
fi
-# If hostfile (XM_FILE) and/or targetfile (DEPRECATED_TM_FILE) and/or
-# nativefile (NAT_FILE) is not set in config/*/*.m[ht] files, we link
+# If nativefile (NAT_FILE) is not set in config/*/*.m[ht] files, we link
# to an empty version.
files=
links=
-rm -f xm.h
-xm_h=""
-if test "${hostfile}" != ""; then
- xm_h=xm.h
- case "${hostfile}" in
- xm-*.h ) GDB_XM_FILE="config/${gdb_host_cpu}/${hostfile}" ;;
- * ) GDB_XM_FILE="${hostfile}"
- esac
- files="${files} ${GDB_XM_FILE}"
- links="${links} xm.h"
- AC_DEFINE_UNQUOTED(GDB_XM_FILE, "${GDB_XM_FILE}", [hostfile])
-fi
-AC_SUBST(xm_h)
-
-rm -f tm.h
-tm_h=""
-if test "${targetfile}" != ""; then
- tm_h=tm.h
- case "${targetfile}" in
- tm-*.h ) GDB_TM_FILE="config/${gdb_target_cpu}/${targetfile}" ;;
- * ) GDB_TM_FILE="${targetfile}"
- esac
- files="${files} ${GDB_TM_FILE}"
- links="${links} tm.h"
- AC_DEFINE_UNQUOTED(GDB_TM_FILE, "${GDB_TM_FILE}", [targetfile])
-fi
-AC_SUBST(tm_h)
-
rm -f nm.h
nm_h=""
if test "${nativefile}" != ""; then
dnl
changequote(,)dnl
-sed -e '/^DEPRECATED_TM_FILE[ ]*=/s,^DEPRECATED_TM_FILE[ ]*=[ ]*,&config/'"${gdb_target_cpu}"'/,
-/^XM_FILE[ ]*=/s,^XM_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,
-/^NAT_FILE[ ]*=/s,^NAT_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,' <Makefile >Makefile.tmp
+sed -e '/^NAT_FILE[ ]*=/s,^NAT_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,' <Makefile >Makefile.tmp
mv -f Makefile.tmp Makefile
changequote([,])dnl
],
[
gdb_host_cpu=$gdb_host_cpu
-gdb_target_cpu=$gdb_target_cpu
nativefile=$nativefile
])