+configdirs="doc testsuite"
srcname="GDB"
srctrigger=main.c
# per-host:
-if [ ! -f xconfig/${host} ]; then
- echo "No such host ${host}"
+# Map host cpu into the config cpu subdirectory name.
+# The default is $host_cpu.
+
+case "${host_cpu}" in
+
+c[12]) gdb_host_cpu=convex ;;
+hppa*) gdb_host_cpu=pa ;;
+i[34]86) gdb_host_cpu=i386 ;;
+m68*) gdb_host_cpu=m68k ;;
+np1) gdb_host_cpu=gould ;;
+pyramid) gdb_host_cpu=pyr ;;
+*) gdb_host_cpu=$host_cpu ;;
+
+esac
+
+# map host info into gdb names.
+
+case "${host}" in
+
+a29k-*-*) gdb_host=ultra3 ;;
+
+arm-*-*) gdb_host=arm ;;
+
+c[12]-*-*) gdb_host=convex ;;
+
+hppa*-hp-bsd*) gdb_host=hppabsd ;;
+hppa*-hp-hpux*) gdb_host=hppahpux ;;
+
+i[34]86-ncr-*) gdb_host=ncr3000 ;;
+i[34]86-sequent-*) gdb_host=symmetry ;;
+
+i[34]86-*-bsd*) gdb_host=i386bsd ;;
+i[34]86-*-go32) gdb_host=go32 ;;
+i[34]86-*-linux) gdb_host=linux ;;
+i[34]86-*-mach) gdb_host=i386mach ;;
+i[34]86-*-sco3.2v4*) gdb_host=i386sco4 ;;
+i[34]86-*-sco*) gdb_host=i386sco ;;
+i[34]86-*-solaris*) gdb_host=i386sol2 ;;
+i[34]86-*-sunos*) gdb_host=sun386 ;;
+i[34]86-*-sysv3.2) gdb_host=i386v32 ;;
+i[34]86-*-sysv4*) gdb_host=i386v4 ;;
+i[34]86-*-sysv*) gdb_host=i386v ;;
+i[34]86-*-isc*) gdb_host=i386v32 ;;
+
+m680[01]0-sun-sunos3*) gdb_host=sun2os3 ;;
+m680[01]0-sun-sunos4*) gdb_host=sun2os4 ;;
+m68030-sony-*) gdb_host=news1000 ;;
+
+m68*-altos-*) gdb_host=altos ;;
+m68*-apollo*-sysv*) gdb_host=apollo68v ;;
+m68*-apollo*-bsd*) gdb_host=apollo68b ;;
+m68*-att-*) gdb_host=3b1 ;;
+m68*-cbm-sysv4*) gdb_host=amix ;;
+m68*-hp-bsd*) gdb_host=hp300bsd ;;
+m68*-hp-hpux*) gdb_host=hp300hpux ;;
+m68*-isi-*) gdb_host=isi ;;
+m68*-sony-*) gdb_host=news ;;
+m68*-sun-sunos3*) gdb_host=sun3os3 ;;
+m68*-sun-sunos4*) gdb_host=sun3os4 ;;
+m68*-sun-*) gdb_host=sun3os4 ;;
+
+m88k-motorola-*) gdb_host=delta88 ;;
+m88k-*-*) gdb_host=m88k ;;
+
+mips-dec-*) gdb_host=decstation ;;
+mips-little-*) gdb_host=littlemips ;;
+mips-sgi-irix3) gdb_host=irix3 ;;
+mips-sgi-irix4*) gdb_host=irix4 ;;
+mips-sony-*) gdb_host=bigmips ;;
+
+none-*-*) gdb_host=none ;;
+
+np1-*-*) gdb_host=np1 ;;
+
+ns32k-umax-*) gdb_host=umax ;;
+ns32k-utek-sysv) gdb_host=merlin ;;
+
+pn-*-*) gdb_host=pn ;;
+
+pyramid-*-*) gdb_host=pyramid ;;
+
+romp-*-*) gdb_host=rtbsd ;;
+
+rs6000-*-*) gdb_host=rs6000 ;;
+
+sparc-*-solaris2*) gdb_host=sun4sol2 ;;
+sparc-*-sunos4*) gdb_host=sun4os4 ;;
+sparc-*-*) gdb_host=sun4os4 ;;
+
+tahoe-*-*) gdb_host=tahoe ;;
+
+vax-*-bsd*) gdb_host=vaxbsd ;;
+vax-*-ultrix2*) gdb_host=vaxult2 ;;
+vax-*-ultrix*) gdb_host=vaxult ;;
+
+esac
+
+
+if [ ! -f ${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh ]; then
+ echo '***' "Gdb does not support host ${host}" 1>&2
exit 1
fi
# We really shouldn't depend on there being a space after XM_FILE= ...
-hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <xconfig/$host`
+hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh`
# per-target:
-if [ ! -f tconfig/${target} ]; then
- echo "No such target ${target}"
+# Map target cpu into the config cpu subdirectory name.
+# The default is $target_cpu.
+
+case "${target_cpu}" in
+
+c[12]) gdb_target_cpu=convex ;;
+hppa*) gdb_target_cpu=pa ;;
+i[34]86) gdb_target_cpu=i386 ;;
+m68*) gdb_target_cpu=m68k ;;
+np1) gdb_target_cpu=gould ;;
+pn) gdb_target_cpu=gould ;;
+pyramid) gdb_target_cpu=pyr ;;
+sparclite) gdb_target_cpu=sparc
+ configdirs="${configdirs} sparclite"
+ ;;
+sparc*) gdb_target_cpu=sparc ;;
+*) gdb_target_cpu=$target_cpu ;;
+
+esac
+
+# map target info into gdb names.
+
+case "${target}" in
+
+a29k-*-aout) gdb_target=a29k ;;
+a29k-*-coff) gdb_target=a29k ;;
+a29k-*-elf) gdb_target=a29k ;;
+a29k-*-ebmon) gdb_target=a29k ;;
+a29k-*-kern) gdb_target=a29k-kern ;;
+a29k-*-none) gdb_target=a29k ;;
+a29k-*-sym1) gdb_target=ultra3 ;;
+a29k-*-udi) gdb_target=a29k-udi ;;
+
+arm-*-*) gdb_target=arm ;;
+
+c1-*-*) gdb_target=convex ;;
+c2-*-*) gdb_target=convex ;;
+
+h8300-*-*) gdb_target=h8300hms ;;
+h8500-*-*) gdb_target=h8500hms ;;
+
+sh-*-*) gdb_target=sh ;;
+
+hppa*-*-bsd*) gdb_target=hppabsd ;;
+hppa*-*-hpux*) gdb_target=hppahpux ;;
+
+i[34]86-sequent-*) gdb_target=symmetry ;;
+i[34]86-ncr-*) gdb_target=ncr3000 ;;
+
+i[34]86-*-aout) gdb_target=i386aout ;;
+i[34]86-*-coff) gdb_target=i386v ;;
+i[34]86-*-elf) gdb_target=i386v ;;
+
+i[34]86-*-bsd*) gdb_target=i386bsd ;;
+i[34]86-*-go32) gdb_target=i386aout ;;
+i[34]86-*-lynxos*) gdb_target=i386lynx
+ configdirs="${configdirs} gdbserver"
+ ;;
+i[34]86-*-solaris*) gdb_target=i386sol2 ;;
+i[34]86-*-sunos*) gdb_target=sun386 ;;
+i[34]86-*-sysv4*) gdb_target=i386v4 ;;
+i[34]86-*-sco*) gdb_target=i386v ;;
+i[34]86-*-sysv*) gdb_target=i386v ;;
+i[34]86-*-linux*) gdb_target=linux ;;
+i[34]86-*-isc*) gdb_target=i386v ;;
+
+i960-*-bout) gdb_target=vxworks960 ;;
+i960-*-coff) gdb_target=nindy960 ;;
+i960-*-elf) gdb_target=nindy960 ;;
+
+i960-*-nindy) gdb_target=nindy960 ;;
+i960-*-vxworks) gdb_target=vxworks960 ;;
+
+m68000-*-aout) gdb_target=m68k-nofp ;;
+m68000-*-coff) gdb_target=m68k-nofp ;;
+m68000-*-elf) gdb_target=m68k-nofp ;;
+m68000-*-sunos3*) gdb_target=sun2os3 ;;
+m68000-*-sunos4*) gdb_target=sun2os4 ;;
+
+m68*-cbm-sysv4*) gdb_target=amix ;;
+m68*-hp-bsd*) gdb_target=hp300bsd ;;
+m68*-hp-hpux*) gdb_target=hp300hpux ;;
+
+m68*-altos-*) gdb_target=altos ;;
+m68*-att-*) gdb_target=3b1 ;;
+m68*-ericsson-*) gdb_target=es1800 ;;
+m68*-isi-*) gdb_target=isi ;;
+m68*-netx-*) gdb_target=vxworks68 ;;
+m68*-sony-*) gdb_target=news ;;
+m68*-tandem-*) gdb_target=st2000 ;;
+
+m68*-rom68k-*) gdb_target=monitor ;;
+m68*-*bug-*) gdb_target=monitor ;;
+m68*-monitor-*) gdb_target=monitor ;;
+
+m68*-*-aout) gdb_target=m68k-fp ;;
+m68*-*-coff) gdb_target=m68k-fp ;;
+m68*-*-elf) gdb_target=m68k-fp ;;
+m68*-*-os68k) gdb_target=os68k ;;
+m68*-*-sunos3*) gdb_target=sun3os3 ;;
+m68*-*-sunos4*) gdb_target=sun3os4 ;;
+m68*-*-vxworks*) gdb_target=vxworks68 ;;
+
+m88k-motorola-*) gdb_target=delta88 ;;
+m88k-*-*) gdb_target=m88k ;;
+
+mips-big-*) gdb_target=bigmips ;;
+mips-dec-*) gdb_target=decstation ;;
+mips-idt-ecoffl*) gdb_target=idtl ;;
+mips-idt-ecoff*) gdb_target=idt ;;
+mips-little-*) gdb_target=littlemips ;;
+mips-sgi-*) gdb_target=irix3 ;;
+mips-sony-*) gdb_target=bigmips ;;
+
+none-*-*) gdb_target=none ;;
+
+np1-*-*) gdb_target=np1 ;;
+
+ns32k-utek-sysv) gdb_target=merlin ;;
+ns32k-utek-*) gdb_target=umax ;;
+
+pn-*-*) gdb_target=pn ;;
+
+pyramid-*-*) gdb_target=pyramid ;;
+
+rs6000-*-*) gdb_target=rs6000 ;;
+
+sparc-*-aout) gdb_target=sparc-em ;;
+sparc-*-coff) gdb_target=sparc-em ;;
+sparc-*-elf) gdb_target=sparc-em ;;
+sparc-*-solaris2*) gdb_target=sun4sol2 ;;
+sparc-*-sunos4*) gdb_target=sun4os4 ;;
+sparc-*-vxworks*) gdb_target=vxsparc ;;
+sparc-*-*) gdb_target=sun4os4 ;;
+sparclite*-*-*) gdb_target=sparclite ;;
+
+tahoe-*-*) gdb_target=tahoe ;;
+vax-*-*) gdb_target=vax ;;
+
+z8k-*-sim) gdb_target=z8ksim ;;
+esac
+
+if [ ! -f ${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt ]; then
+ echo '***' "Gdb does not support target ${target}" 1>&2
exit 1
fi
if [ -z "${removing}" ] ; then
- cat xconfig/${host} tconfig/${target} | awk '$1 == "#msg" {
+ cat ${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh ${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt | awk '$1 == "#msg" {
print substr($0,6)}'
fi
# We really shouldn't depend on there being a space after TM_FILE= ...
-targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <tconfig/$target`
+targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt`
+
+if [ "${target}" = "${host}" ] ; then
+ nativefile=`awk '$1 == "NAT_FILE=" { print $2 }' <${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh`
+fi
-host_makefile_frag=xconfig/${host}
-target_makefile_frag=tconfig/${target}
+host_makefile_frag=config/${gdb_host_cpu}/${gdb_host}.mh
+target_makefile_frag=config/${gdb_target_cpu}/${gdb_target}.mt
+
+# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
+# (NAT_FILE) is not set in the ?config/* file, we don't make the
+# corresponding links. But we have to remove the xm.h files and tm.h
+# files anyway, e.g. when switching from "configure host" to
+# "configure none".
-# If hostfile (XM_FILE) and/or targetfile (TM_FILE) is not set in the
-# ?config/* file, we don't make the corresponding links. But we have
-# to remove the xm.h files and tm.h files anyway, e.g. when switching
-# from "configure host" to "configure none".
files=
links=
rm -f xm.h
if [ "${hostfile}" != "" ]; then
- files="${files} ${hostfile}"
+ if [ -f ${srcdir}/config/${hostfile} ]; then
+ files="${files} config/${hostfile}"
+ else
+ files="${files} config/${gdb_host_cpu}/${hostfile}"
+ fi
links="${links} xm.h"
fi
rm -f tm.h
if [ "${targetfile}" != "" ]; then
- files="${files} ${targetfile}"
+ if [ -f ${srcdir}/config/${targetfile} ]; then
+ files="${files} config/${targetfile}"
+ else
+ files="${files} config/${gdb_target_cpu}/${targetfile}"
+ fi
links="${links} tm.h"
fi
+rm -f nm.h
+if [ "${nativefile}" != "" ]; then
+ if [ -f ${srcdir}/config/${nativefile} ]; then
+ files="${files} config/${nativefile}"
+ else
+ files="${files} config/${gdb_host_cpu}/${nativefile}"
+ fi
+ links="${links} nm.h"
+# temporary scaffolding until all hosts have the host/target/native
+# split in place.
+else
+ files="${files} config/nm-trash.h"
+ links="${links} nm.h"
+fi
# post-target:
echo "source ${srcdir}/.gdbinit" >> .gdbinit
esac
+if [ "${nativefile}" = "" ] ; then
+ sed -e '/^NATDEPFILES= /s//# NATDEPFILES= /' \
+ < Makefile > Makefile.tem
+ mv -f Makefile.tem Makefile
+fi
+
cat ${srcdir}/alldeps.mak ${srcdir}/depend >>Makefile