# gdb_target_cpu generic name of CPU
# gdb_target name of GDB target definition to use
-# This file may also modify configdirs.
-
# Map target cpu into the config cpu subdirectory name.
# The default is $target_cpu.
sh*) gdb_target_cpu=sh ;;
strongarm*) gdb_target_cpu=arm ;;
xscale*) gdb_target_cpu=arm ;;
-v850*) gdb_target_cpu=v850 ;;
x86_64*) gdb_target_cpu=i386 ;;
*) gdb_target_cpu=$target_cpu ;;
arm-*-nto*) gdb_target=nto ;;
arm*-*-* | thumb*-*-* | strongarm*-*-*)
gdb_target=embed
- configdirs="$configdirs rdi-share"
+ build_rdi_share=yes
;;
xscale-*-*) gdb_target=embed
- configdirs="$configdirs rdi-share"
+ build_rdi_share=yes
;;
avr-*-*) gdb_target=avr ;;
# OBSOLETE d10v-*-*) gdb_target=d10v ;;
-h8300-*-*) gdb_target=h8300 ;;
-
-
frv-*-*) gdb_target=frv ;;
+h8300-*-*) gdb_target=h8300 ;;
+
hppa*64*-*-hpux11*) gdb_target=hppa64 ;;
hppa*-*-hpux*) gdb_target=hppahpux ;;
hppa*-*-hiux*) gdb_target=hppahpux ;;
;;
i[34567]86-*-gnu*) gdb_target=i386gnu ;;
i[34567]86-*-netware*) gdb_target=i386
- configdirs="${configdirs} nlm" ;;
+ build_nlm=yes
+ ;;
i[34567]86-*-cygwin*) gdb_target=cygwin ;;
-i[34567]86-*-vxworks*) gdb_target=vxworks ;;
i[34567]86-*-*) gdb_target=i386 ;;
-ia64-*-aix*) gdb_target=aix ;;
ia64-*-linux*) gdb_target=linux
build_gdbserver=yes
;;
ia64*-*-*) gdb_target=ia64 ;;
+iq2000-*-*) gdb_target=iq2000 ;;
+
m32r*-*-linux*) gdb_target=linux ;;
m32r*-*-*) gdb_target=m32r ;;
m68hc11*-*-*|m6811*-*-*) gdb_target=m68hc11 ;;
m68*-cisco*-*) gdb_target=cisco ;;
-m68*-netx-*) gdb_target=vxworks68 ;;
m68*-tandem-*) gdb_target=st2000 ;;
m68*-*-aout*) gdb_target=monitor ;;
m68*-*-coff*) gdb_target=monitor ;;
m68*-*-elf*) gdb_target=monitor ;;
+m68*-*-rtems*) gdb_target=monitor ;;
m68*-*-linux*) gdb_target=linux
build_gdbserver=yes
;;
m68*-*-openbsd*) gdb_target=obsd ;;
m68*-*-os68k*) gdb_target=os68k ;;
m68*-*-uclinux*) gdb_target=monitor ;;
-m68*-*-vxworks*) gdb_target=vxworks68 ;;
m88*-*-openbsd*) gdb_target=obsd ;;
-mcore*-*-*) gdb_target=mcore ;;
-
mips*-*-pe) gdb_target=wince ;;
mips*-sgi-irix5*) gdb_target=irix5 ;;
mips*-sgi-irix6*) gdb_target=irix6 ;;
mips*-*-netbsd* | mips*-*-knetbsd*-gnu)
gdb_target=nbsd ;;
mips64*-*-openbsd*) gdb_target=obsd64 ;;
-mips*-*-vxworks*) gdb_target=vxmips ;;
mips*-*-*) gdb_target=embed ;;
mn10300-*-*) gdb_target=mn10300 ;;
-ns32k-*-netbsd*) gdb_target=nbsdaout ;;
-
powerpc-*-netbsd* | powerpc-*-knetbsd*-gnu)
gdb_target=nbsd ;;
powerpc-*-openbsd*) gdb_target=obsd ;;
build_gdbserver=yes
;;
powerpc64-*-linux*) gdb_target=linux ;;
-powerpc-*-vxworks*) gdb_target=vxworks ;;
powerpc*-*-*) if test -f ../sim/ppc/Makefile; then
gdb_target=ppc-sim
else
sh*-*-netbsdelf* | sh*-*-knetbsd*-gnu)
gdb_target=nbsd ;;
sh-*-nto*) gdb_target=nto ;;
+sh64-*-elf*) gdb_target=sh64 ;;
sh*) gdb_target=embed ;;
sparc-*-linux*) gdb_target=linux ;;
sparc-*-solaris2* | sparcv9-*-solaris2* | sparc64-*-solaris2*)
gdb_target=sol2-64
;;
-sparc-*-vxworks*) gdb_target=vxworks ;;
sparc-*-*) gdb_target=sparc ;;
sparc64-*-*) gdb_target=sparc64 ;;
vax-*-openbsd*) gdb_target=nbsd ;;
vax-*-*) gdb_target=vax ;;
-v850*-*-*) gdb_target=v850
- case ${gdb_host} in
- cygwin*)
- CONFIG_OBS="${CONFIG_OBS} v850ice.o" ;;
- * ) ;;
- esac
- ;;
-
x86_64-*-linux*) gdb_target=linux64
build_gdbserver=yes
;;
# map target onto default OS ABI
case "${target}" in
+*-*-freebsd*) gdb_osabi=GDB_OSABI_FREEBSD_ELF ;;
*-*-linux*) gdb_osabi=GDB_OSABI_LINUX ;;
*-*-nto*) gdb_osabi=GDB_OSABI_QNXNTO ;;
m68*-*-openbsd* | m88*-*-openbsd* | vax-*-openbsd*) ;;