/* Core dump and executable file functions below target vector, for GDB.
- Copyright 1986, 87, 89, 91, 92, 93, 94, 95, 96, 97, 1998, 2000
+ Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
+ 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This file is part of GDB.
#include <errno.h>
#include <signal.h>
#include <fcntl.h>
+#ifdef HAVE_SYS_FILE_H
+#include <sys/file.h> /* needed for F_OK and friends */
+#endif
#include "frame.h" /* required by inferior.h */
#include "inferior.h"
#include "symtab.h"
#include "target.h"
#include "gdbcore.h"
#include "gdbthread.h"
+#include "regcache.h"
+#include "symfile.h"
#ifndef O_BINARY
#define O_BINARY 0
static int ignore (CORE_ADDR, char *);
-static char *core_file_to_sym_file (char *);
-
-static int core_file_thread_alive (int tid);
+static int core_file_thread_alive (ptid_t tid);
static void init_core_ops (void);
/* Walk through the list of core functions to find a set that can
handle the core file open on ABFD. Default to the first one in the
- list of nothing matches. Returns pointer to set that is
+ list if nothing matches. Returns pointer to set that is
selected. */
static struct core_fns *
if (core_bfd)
{
- inferior_pid = 0; /* Avoid confusion from thread stuff */
+ inferior_ptid = null_ptid; /* Avoid confusion from thread stuff */
/* Clear out solib state while the bfd is still open. See
comments in clear_solib in solib.c. */
if (!bfd_close (core_bfd))
warning ("cannot close \"%s\": %s",
name, bfd_errmsg (bfd_get_error ()));
- free (name);
+ xfree (name);
core_bfd = NULL;
if (core_ops.to_sections)
{
- free ((PTR) core_ops.to_sections);
+ xfree (core_ops.to_sections);
core_ops.to_sections = NULL;
core_ops.to_sections_end = NULL;
}
static int
solib_add_stub (PTR from_ttyp)
{
- SOLIB_ADD (NULL, *(int *) from_ttyp, ¤t_target);
+ SOLIB_ADD (NULL, *(int *) from_ttyp, ¤t_target, auto_solib_add);
re_enable_breakpoints_in_shlibs ();
return 0;
}
thread_id = atoi (bfd_section_name (abfd, asect) + 5);
- add_thread (thread_id);
+ add_thread (pid_to_ptid (thread_id));
/* Warning, Will Robinson, looking at BFD private data! */
if (reg_sect != NULL
&& asect->filepos == reg_sect->filepos) /* Did we find .reg? */
- inferior_pid = thread_id; /* Yes, make it current */
+ inferior_ptid = pid_to_ptid (thread_id); /* Yes, make it current */
}
/* This routine opens and sets up the core file bfd. */
if (filename[0] != '/')
{
temp = concat (current_directory, "/", filename, NULL);
- free (filename);
+ xfree (filename);
filename = temp;
}
- old_chain = make_cleanup (free, filename);
+ old_chain = make_cleanup (xfree, filename);
scratch_chan = open (filename, O_BINARY | ( write_files ? O_RDWR : O_RDONLY ), 0);
if (scratch_chan < 0)
siggy = bfd_core_file_failing_signal (core_bfd);
if (siggy > 0)
/* NOTE: target_signal_from_host() converts a target signal value
- into gdb's internal signal value. Unfortunatly gdb's internal
+ into gdb's internal signal value. Unfortunately gdb's internal
value is called ``target_signal'' and this function got the
name ..._from_host(). */
printf_filtered ("Program terminated with signal %d, %s.\n", siggy,
them to core_vec->core_read_registers, as the register set numbered
WHICH.
- If inferior_pid is zero, do the single-threaded thing: look for a
- section named NAME. If inferior_pid is non-zero, do the
+ If inferior_ptid is zero, do the single-threaded thing: look for a
+ section named NAME. If inferior_ptid is non-zero, do the
multi-threaded thing: look for a section named "NAME/PID", where
- PID is the shortest ASCII decimal representation of inferior_pid.
+ PID is the shortest ASCII decimal representation of inferior_ptid.
HUMAN_NAME is a human-readable name for the kind of registers the
NAME section contains, for use in error messages.
bfd_size_type size;
char *contents;
- if (inferior_pid)
- sprintf (section_name, "%s/%d", name, inferior_pid);
+ if (PIDGET (inferior_ptid))
+ sprintf (section_name, "%s/%d", name, PIDGET (inferior_ptid));
else
strcpy (section_name, name);
registers_fetched ();
}
-static char *
-core_file_to_sym_file (char *core)
-{
- CONST char *failing_command;
- char *p;
- char *temp;
- bfd *temp_bfd;
- int scratch_chan;
-
- if (!core)
- error ("No core file specified.");
-
- core = tilde_expand (core);
- if (core[0] != '/')
- {
- temp = concat (current_directory, "/", core, NULL);
- core = temp;
- }
-
- scratch_chan = open (core, write_files ? O_RDWR : O_RDONLY, 0);
- if (scratch_chan < 0)
- perror_with_name (core);
-
- temp_bfd = bfd_fdopenr (core, gnutarget, scratch_chan);
- if (temp_bfd == NULL)
- perror_with_name (core);
-
- if (!bfd_check_format (temp_bfd, bfd_core))
- {
- /* Do it after the err msg */
- /* FIXME: should be checking for errors from bfd_close (for one thing,
- on error it does not free all the storage associated with the
- bfd). */
- make_cleanup_bfd_close (temp_bfd);
- error ("\"%s\" is not a core dump: %s",
- core, bfd_errmsg (bfd_get_error ()));
- }
-
- /* Find the data section */
- if (build_section_table (temp_bfd, &core_ops.to_sections,
- &core_ops.to_sections_end))
- error ("\"%s\": Can't find sections: %s",
- bfd_get_filename (temp_bfd), bfd_errmsg (bfd_get_error ()));
-
- failing_command = bfd_core_file_failing_command (temp_bfd);
-
- bfd_close (temp_bfd);
-
- /* If we found a filename, remember that it is probably saved
- relative to the executable that created it. If working directory
- isn't there now, we may not be able to find the executable. Rather
- than trying to be sauve about finding it, just check if the file
- exists where we are now. If not, then punt and tell our client
- we couldn't find the sym file.
- */
- p = (char *) failing_command;
- if ((p != NULL) && (access (p, F_OK) != 0))
- p = NULL;
-
- return p;
-}
-
static void
core_files_info (struct target_ops *t)
{
behaviour.
*/
static int
-core_file_thread_alive (int tid)
+core_file_thread_alive (ptid_t tid)
{
return 1;
}
core_ops.to_create_inferior = find_default_create_inferior;
core_ops.to_clone_and_follow_inferior = find_default_clone_and_follow_inferior;
core_ops.to_thread_alive = core_file_thread_alive;
- core_ops.to_core_file_to_sym_file = core_file_to_sym_file;
core_ops.to_stratum = core_stratum;
core_ops.to_has_memory = 1;
core_ops.to_has_stack = 1;