/* Target dependent code for CRIS, for GDB, the GNU debugger.
- Copyright 2001 Free Software Foundation, Inc.
+
+ Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ Free Software Foundation, Inc.
+
Contributed by Axis Communications AB.
Written by Hendrik Ruijter, Stefan Andersson, and Orjan Friberg.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+Foundation, Inc., 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "frame.h"
+#include "frame-unwind.h"
+#include "frame-base.h"
+#include "trad-frame.h"
+#include "dwarf2-frame.h"
#include "symtab.h"
#include "inferior.h"
#include "gdbtypes.h"
#include "opcode/cris.h"
#include "arch-utils.h"
#include "regcache.h"
+#include "gdb_assert.h"
/* To get entry_point_address. */
-#include "symfile.h"
-
-#include "solib.h" /* Support for shared libraries. */
-#include "solib-svr4.h" /* For struct link_map_offsets. */
+#include "objfiles.h"
+#include "solib.h" /* Support for shared libraries. */
+#include "solib-svr4.h"
+#include "gdb_string.h"
+#include "dis-asm.h"
enum cris_num_regs
{
NUM_GENREGS = 16,
/* There are 16 special registers. */
- NUM_SPECREGS = 16
+ NUM_SPECREGS = 16,
+
+ /* CRISv32 has a pseudo PC register, not noted here. */
+
+ /* CRISv32 has 16 support registers. */
+ NUM_SUPPREGS = 16
};
/* Register numbers of various important registers.
- FP_REGNUM Contains address of executing stack frame.
+ CRIS_FP_REGNUM Contains address of executing stack frame.
STR_REGNUM Contains the address of structure return values.
RET_REGNUM Contains the return value when shorter than or equal to 32 bits
ARG1_REGNUM Contains the first parameter to a function.
SRP_REGNUM Subroutine return pointer register.
BRP_REGNUM Breakpoint return pointer register. */
-/* FP_REGNUM = 8, SP_REGNUM = 14, and PC_REGNUM = 15 have been incorporated
- into the multi-arch framework. */
-
enum cris_regnums
{
/* Enums with respect to the general registers, valid for all
- CRIS versions. */
+ CRIS versions. The frame pointer is always in R8. */
+ CRIS_FP_REGNUM = 8,
+ /* ABI related registers. */
STR_REGNUM = 9,
RET_REGNUM = 10,
ARG1_REGNUM = 10,
ARG3_REGNUM = 12,
ARG4_REGNUM = 13,
- /* Enums with respect to the special registers, some of which may not be
- applicable to all CRIS versions. */
- P0_REGNUM = 16,
+ /* Registers which happen to be common. */
VR_REGNUM = 17,
- P2_REGNUM = 18,
- P3_REGNUM = 19,
+ MOF_REGNUM = 23,
+ SRP_REGNUM = 27,
+
+ /* CRISv10 et. al. specific registers. */
+ P0_REGNUM = 16,
P4_REGNUM = 20,
CCR_REGNUM = 21,
- MOF_REGNUM = 23,
P8_REGNUM = 24,
IBR_REGNUM = 25,
IRP_REGNUM = 26,
- SRP_REGNUM = 27,
BAR_REGNUM = 28,
DCCR_REGNUM = 29,
BRP_REGNUM = 30,
- USP_REGNUM = 31
+ USP_REGNUM = 31,
+
+ /* CRISv32 specific registers. */
+ ACR_REGNUM = 15,
+ BZ_REGNUM = 16,
+ PID_REGNUM = 18,
+ SRS_REGNUM = 19,
+ WZ_REGNUM = 20,
+ EXS_REGNUM = 21,
+ EDA_REGNUM = 22,
+ DZ_REGNUM = 24,
+ EBP_REGNUM = 25,
+ ERP_REGNUM = 26,
+ NRP_REGNUM = 28,
+ CCS_REGNUM = 29,
+ CRISV32USP_REGNUM = 30, /* Shares name but not number with CRISv10. */
+ SPC_REGNUM = 31,
+ CRISV32PC_REGNUM = 32, /* Shares name but not number with CRISv10. */
+
+ S0_REGNUM = 33,
+ S1_REGNUM = 34,
+ S2_REGNUM = 35,
+ S3_REGNUM = 36,
+ S4_REGNUM = 37,
+ S5_REGNUM = 38,
+ S6_REGNUM = 39,
+ S7_REGNUM = 40,
+ S8_REGNUM = 41,
+ S9_REGNUM = 42,
+ S10_REGNUM = 43,
+ S11_REGNUM = 44,
+ S12_REGNUM = 45,
+ S13_REGNUM = 46,
+ S14_REGNUM = 47,
+ S15_REGNUM = 48,
};
extern const struct cris_spec_reg cris_spec_regs[];
/* CRIS version, set via the user command 'set cris-version'. Affects
- register names and sizes.*/
+ register names and sizes. */
static int usr_cmd_cris_version;
/* Indicates whether to trust the above variable. */
static int usr_cmd_cris_version_valid = 0;
-/* CRIS mode, set via the user command 'set cris-mode'. Affects availability
- of some registers. */
-static const char *usr_cmd_cris_mode;
-
-/* Indicates whether to trust the above variable. */
-static int usr_cmd_cris_mode_valid = 0;
-
-static const char CRIS_MODE_USER[] = "CRIS_MODE_USER";
-static const char CRIS_MODE_SUPERVISOR[] = "CRIS_MODE_SUPERVISOR";
-static const char *cris_mode_enums[] =
-{
- CRIS_MODE_USER,
- CRIS_MODE_SUPERVISOR,
+static const char cris_mode_normal[] = "normal";
+static const char cris_mode_guru[] = "guru";
+static const char *cris_modes[] = {
+ cris_mode_normal,
+ cris_mode_guru,
0
};
-/* CRIS ABI, set via the user command 'set cris-abi'.
- There are two flavours:
- 1. Original ABI with 32-bit doubles, where arguments <= 4 bytes are
- passed by value.
- 2. New ABI with 64-bit doubles, where arguments <= 8 bytes are passed by
- value. */
-static const char *usr_cmd_cris_abi;
+/* CRIS mode, set via the user command 'set cris-mode'. Affects
+ type of break instruction among other things. */
+static const char *usr_cmd_cris_mode = cris_mode_normal;
-/* Indicates whether to trust the above variable. */
-static int usr_cmd_cris_abi_valid = 0;
-
-/* These variables are strings instead of enums to make them usable as
- parameters to add_set_enum_cmd. */
-static const char CRIS_ABI_ORIGINAL[] = "CRIS_ABI_ORIGINAL";
-static const char CRIS_ABI_V2[] = "CRIS_ABI_V2";
-static const char CRIS_ABI_SYMBOL[] = ".$CRIS_ABI_V2";
-static const char *cris_abi_enums[] =
-{
- CRIS_ABI_ORIGINAL,
- CRIS_ABI_V2,
- 0
-};
+/* Whether to make use of Dwarf-2 CFI (default on). */
+static int usr_cmd_cris_dwarf2_cfi = 1;
/* CRIS architecture specific information. */
struct gdbarch_tdep
{
int cris_version;
const char *cris_mode;
- const char *cris_abi;
+ int cris_dwarf2_cfi;
};
/* Functions for accessing target dependent data. */
return (gdbarch_tdep (current_gdbarch)->cris_mode);
}
-static const char *
-cris_abi (void)
+/* Sigtramp identification code copied from i386-linux-tdep.c. */
+
+#define SIGTRAMP_INSN0 0x9c5f /* movu.w 0xXX, $r9 */
+#define SIGTRAMP_OFFSET0 0
+#define SIGTRAMP_INSN1 0xe93d /* break 13 */
+#define SIGTRAMP_OFFSET1 4
+
+static const unsigned short sigtramp_code[] =
+{
+ SIGTRAMP_INSN0, 0x0077, /* movu.w $0x77, $r9 */
+ SIGTRAMP_INSN1 /* break 13 */
+};
+
+#define SIGTRAMP_LEN (sizeof sigtramp_code)
+
+/* Note: same length as normal sigtramp code. */
+
+static const unsigned short rt_sigtramp_code[] =
+{
+ SIGTRAMP_INSN0, 0x00ad, /* movu.w $0xad, $r9 */
+ SIGTRAMP_INSN1 /* break 13 */
+};
+
+/* If PC is in a sigtramp routine, return the address of the start of
+ the routine. Otherwise, return 0. */
+
+static CORE_ADDR
+cris_sigtramp_start (struct frame_info *next_frame)
{
- return (gdbarch_tdep (current_gdbarch)->cris_abi);
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ gdb_byte buf[SIGTRAMP_LEN];
+
+ if (!safe_frame_unwind_memory (next_frame, pc, buf, SIGTRAMP_LEN))
+ return 0;
+
+ if (((buf[1] << 8) + buf[0]) != SIGTRAMP_INSN0)
+ {
+ if (((buf[1] << 8) + buf[0]) != SIGTRAMP_INSN1)
+ return 0;
+
+ pc -= SIGTRAMP_OFFSET1;
+ if (!safe_frame_unwind_memory (next_frame, pc, buf, SIGTRAMP_LEN))
+ return 0;
+ }
+
+ if (memcmp (buf, sigtramp_code, SIGTRAMP_LEN) != 0)
+ return 0;
+
+ return pc;
+}
+
+/* If PC is in a RT sigtramp routine, return the address of the start of
+ the routine. Otherwise, return 0. */
+
+static CORE_ADDR
+cris_rt_sigtramp_start (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ gdb_byte buf[SIGTRAMP_LEN];
+
+ if (!safe_frame_unwind_memory (next_frame, pc, buf, SIGTRAMP_LEN))
+ return 0;
+
+ if (((buf[1] << 8) + buf[0]) != SIGTRAMP_INSN0)
+ {
+ if (((buf[1] << 8) + buf[0]) != SIGTRAMP_INSN1)
+ return 0;
+
+ pc -= SIGTRAMP_OFFSET1;
+ if (!safe_frame_unwind_memory (next_frame, pc, buf, SIGTRAMP_LEN))
+ return 0;
+ }
+
+ if (memcmp (buf, rt_sigtramp_code, SIGTRAMP_LEN) != 0)
+ return 0;
+
+ return pc;
}
-/* For saving call-clobbered contents in R9 when returning structs. */
-static CORE_ADDR struct_return_address;
+/* Assuming NEXT_FRAME is a frame following a GNU/Linux sigtramp
+ routine, return the address of the associated sigcontext structure. */
-struct frame_extra_info
+static CORE_ADDR
+cris_sigcontext_addr (struct frame_info *next_frame)
{
+ CORE_ADDR pc;
+ CORE_ADDR sp;
+ char buf[4];
+
+ frame_unwind_register (next_frame, SP_REGNUM, buf);
+ sp = extract_unsigned_integer (buf, 4);
+
+ /* Look for normal sigtramp frame first. */
+ pc = cris_sigtramp_start (next_frame);
+ if (pc)
+ {
+ /* struct signal_frame (arch/cris/kernel/signal.c) contains
+ struct sigcontext as its first member, meaning the SP points to
+ it already. */
+ return sp;
+ }
+
+ pc = cris_rt_sigtramp_start (next_frame);
+ if (pc)
+ {
+ /* struct rt_signal_frame (arch/cris/kernel/signal.c) contains
+ a struct ucontext, which in turn contains a struct sigcontext.
+ Magic digging:
+ 4 + 4 + 128 to struct ucontext, then
+ 4 + 4 + 12 to struct sigcontext. */
+ return (sp + 156);
+ }
+
+ error (_("Couldn't recognize signal trampoline."));
+ return 0;
+}
+
+struct cris_unwind_cache
+{
+ /* The previous frame's inner most stack address. Used as this
+ frame ID's stack_addr. */
+ CORE_ADDR prev_sp;
+ /* The frame's base, optionally used by the high-level debug info. */
+ CORE_ADDR base;
+ int size;
+ /* How far the SP and r8 (FP) have been offset from the start of
+ the stack frame (as defined by the previous frame's stack
+ pointer). */
+ LONGEST sp_offset;
+ LONGEST r8_offset;
+ int uses_frame;
+
+ /* From old frame_extra_info struct. */
CORE_ADDR return_pc;
int leaf_function;
+
+ /* Table indicating the location of each and every register. */
+ struct trad_frame_saved_reg *saved_regs;
+};
+
+static struct cris_unwind_cache *
+cris_sigtramp_frame_unwind_cache (struct frame_info *next_frame,
+ void **this_cache)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct cris_unwind_cache *info;
+ CORE_ADDR pc;
+ CORE_ADDR sp;
+ CORE_ADDR addr;
+ char buf[4];
+ int i;
+
+ if ((*this_cache))
+ return (*this_cache);
+
+ info = FRAME_OBSTACK_ZALLOC (struct cris_unwind_cache);
+ (*this_cache) = info;
+ info->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+
+ /* Zero all fields. */
+ info->prev_sp = 0;
+ info->base = 0;
+ info->size = 0;
+ info->sp_offset = 0;
+ info->r8_offset = 0;
+ info->uses_frame = 0;
+ info->return_pc = 0;
+ info->leaf_function = 0;
+
+ frame_unwind_register (next_frame, SP_REGNUM, buf);
+ info->base = extract_unsigned_integer (buf, 4);
+
+ addr = cris_sigcontext_addr (next_frame);
+
+ /* Layout of the sigcontext struct:
+ struct sigcontext {
+ struct pt_regs regs;
+ unsigned long oldmask;
+ unsigned long usp;
+ }; */
+
+ if (tdep->cris_version == 10)
+ {
+ /* R0 to R13 are stored in reverse order at offset (2 * 4) in
+ struct pt_regs. */
+ for (i = 0; i <= 13; i++)
+ info->saved_regs[i].addr = addr + ((15 - i) * 4);
+
+ info->saved_regs[MOF_REGNUM].addr = addr + (16 * 4);
+ info->saved_regs[DCCR_REGNUM].addr = addr + (17 * 4);
+ info->saved_regs[SRP_REGNUM].addr = addr + (18 * 4);
+ /* Note: IRP is off by 2 at this point. There's no point in correcting
+ it though since that will mean that the backtrace will show a PC
+ different from what is shown when stopped. */
+ info->saved_regs[IRP_REGNUM].addr = addr + (19 * 4);
+ info->saved_regs[PC_REGNUM] = info->saved_regs[IRP_REGNUM];
+ info->saved_regs[SP_REGNUM].addr = addr + (24 * 4);
+ }
+ else
+ {
+ /* CRISv32. */
+ /* R0 to R13 are stored in order at offset (1 * 4) in
+ struct pt_regs. */
+ for (i = 0; i <= 13; i++)
+ info->saved_regs[i].addr = addr + ((i + 1) * 4);
+
+ info->saved_regs[ACR_REGNUM].addr = addr + (15 * 4);
+ info->saved_regs[SRS_REGNUM].addr = addr + (16 * 4);
+ info->saved_regs[MOF_REGNUM].addr = addr + (17 * 4);
+ info->saved_regs[SPC_REGNUM].addr = addr + (18 * 4);
+ info->saved_regs[CCS_REGNUM].addr = addr + (19 * 4);
+ info->saved_regs[SRP_REGNUM].addr = addr + (20 * 4);
+ info->saved_regs[ERP_REGNUM].addr = addr + (21 * 4);
+ info->saved_regs[EXS_REGNUM].addr = addr + (22 * 4);
+ info->saved_regs[EDA_REGNUM].addr = addr + (23 * 4);
+
+ /* FIXME: If ERP is in a delay slot at this point then the PC will
+ be wrong at this point. This problem manifests itself in the
+ sigaltstack.exp test case, which occasionally generates FAILs when
+ the signal is received while in a delay slot.
+
+ This could be solved by a couple of read_memory_unsigned_integer and a
+ trad_frame_set_value. */
+ info->saved_regs[PC_REGNUM] = info->saved_regs[ERP_REGNUM];
+
+ info->saved_regs[SP_REGNUM].addr = addr + (25 * 4);
+ }
+
+ return info;
+}
+
+static void
+cris_sigtramp_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct cris_unwind_cache *cache =
+ cris_sigtramp_frame_unwind_cache (next_frame, this_cache);
+ (*this_id) = frame_id_build (cache->base, frame_pc_unwind (next_frame));
+}
+
+/* Forward declaration. */
+
+static void cris_frame_prev_register (struct frame_info *next_frame,
+ void **this_prologue_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, gdb_byte *bufferp);
+static void
+cris_sigtramp_frame_prev_register (struct frame_info *next_frame,
+ void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, gdb_byte *valuep)
+{
+ /* Make sure we've initialized the cache. */
+ cris_sigtramp_frame_unwind_cache (next_frame, this_cache);
+ cris_frame_prev_register (next_frame, this_cache, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
+}
+
+static const struct frame_unwind cris_sigtramp_frame_unwind =
+{
+ SIGTRAMP_FRAME,
+ cris_sigtramp_frame_this_id,
+ cris_sigtramp_frame_prev_register
};
+static const struct frame_unwind *
+cris_sigtramp_frame_sniffer (struct frame_info *next_frame)
+{
+ if (cris_sigtramp_start (next_frame)
+ || cris_rt_sigtramp_start (next_frame))
+ return &cris_sigtramp_frame_unwind;
+
+ return NULL;
+}
+
+int
+crisv32_single_step_through_delay (struct gdbarch *gdbarch,
+ struct frame_info *this_frame)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ ULONGEST erp;
+ int ret = 0;
+ char buf[4];
+
+ if (cris_mode () == cris_mode_guru)
+ {
+ frame_unwind_register (this_frame, NRP_REGNUM, buf);
+ }
+ else
+ {
+ frame_unwind_register (this_frame, ERP_REGNUM, buf);
+ }
+
+ erp = extract_unsigned_integer (buf, 4);
+
+ if (erp & 0x1)
+ {
+ /* In delay slot - check if there's a breakpoint at the preceding
+ instruction. */
+ if (breakpoint_here_p (erp & ~0x1))
+ ret = 1;
+ }
+ return ret;
+}
+
+/* Hardware watchpoint support. */
+
+/* We support 6 hardware data watchpoints, but cannot trigger on execute
+ (any combination of read/write is fine). */
+
+int
+cris_can_use_hardware_watchpoint (int type, int count, int other)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ /* No bookkeeping is done here; it is handled by the remote debug agent. */
+
+ if (tdep->cris_version != 32)
+ return 0;
+ else
+ /* CRISv32: Six data watchpoints, one for instructions. */
+ return (((type == bp_read_watchpoint || type == bp_access_watchpoint
+ || type == bp_hardware_watchpoint) && count <= 6)
+ || (type == bp_hardware_breakpoint && count <= 1));
+}
+
+/* The CRISv32 hardware data watchpoints work by specifying ranges,
+ which have no alignment or length restrictions. */
+
+int
+cris_region_ok_for_watchpoint (CORE_ADDR addr, int len)
+{
+ return 1;
+}
+
+/* If the inferior has some watchpoint that triggered, return the
+ address associated with that watchpoint. Otherwise, return
+ zero. */
+
+CORE_ADDR
+cris_stopped_data_address (void)
+{
+ CORE_ADDR eda;
+ eda = read_register (EDA_REGNUM);
+ return eda;
+}
+
/* The instruction environment needed to find single-step breakpoints. */
+
typedef
struct instruction_environment
{
int disable_interrupt;
} inst_env_type;
-/* Save old breakpoints in order to restore the state before a single_step.
- At most, two breakpoints will have to be remembered. */
-typedef
-char binsn_quantum[BREAKPOINT_MAX];
-static binsn_quantum break_mem[2];
-static CORE_ADDR next_pc = 0;
-static CORE_ADDR branch_target_address = 0;
-static unsigned char branch_break_inserted = 0;
-
/* Machine-dependencies in CRIS for opcodes. */
/* Instruction sizes. */
/* Additional functions in order to handle opcodes. */
-static int
-cris_get_wide_opcode (unsigned short insn)
-{
- return ((insn & 0x03E0) >> 5);
-}
-
-static int
-cris_get_short_size (unsigned short insn)
-{
- return ((insn & 0x0010) >> 4);
-}
-
static int
cris_get_quick_value (unsigned short insn)
{
return (value & 0x3F);
}
-static int
-cris_get_asr_quick_shift_steps (unsigned short insn)
-{
- return (insn & 0x1F);
-}
-
static int
cris_get_clear_size (unsigned short insn)
{
inst_env. */
static void cris_gdb_func (enum cris_op_type, unsigned short, inst_env_type *);
-static CORE_ADDR cris_skip_prologue_main (CORE_ADDR pc, int frameless_p);
-
static struct gdbarch *cris_gdbarch_init (struct gdbarch_info,
struct gdbarch_list *);
-static int cris_delayed_get_disassembler (bfd_vma, disassemble_info *);
+static void cris_dump_tdep (struct gdbarch *, struct ui_file *);
+
+static void set_cris_version (char *ignore_args, int from_tty,
+ struct cmd_list_element *c);
+
+static void set_cris_mode (char *ignore_args, int from_tty,
+ struct cmd_list_element *c);
+
+static void set_cris_dwarf2_cfi (char *ignore_args, int from_tty,
+ struct cmd_list_element *c);
+
+static CORE_ADDR cris_scan_prologue (CORE_ADDR pc,
+ struct frame_info *next_frame,
+ struct cris_unwind_cache *info);
+
+static CORE_ADDR crisv32_scan_prologue (CORE_ADDR pc,
+ struct frame_info *next_frame,
+ struct cris_unwind_cache *info);
+
+static CORE_ADDR cris_unwind_pc (struct gdbarch *gdbarch,
+ struct frame_info *next_frame);
+
+static CORE_ADDR cris_unwind_sp (struct gdbarch *gdbarch,
+ struct frame_info *next_frame);
+
+/* When arguments must be pushed onto the stack, they go on in reverse
+ order. The below implements a FILO (stack) to do this.
+ Copied from d10v-tdep.c. */
+
+struct stack_item
+{
+ int len;
+ struct stack_item *prev;
+ void *data;
+};
+
+static struct stack_item *
+push_stack_item (struct stack_item *prev, void *contents, int len)
+{
+ struct stack_item *si;
+ si = xmalloc (sizeof (struct stack_item));
+ si->data = xmalloc (len);
+ si->len = len;
+ si->prev = prev;
+ memcpy (si->data, contents, len);
+ return si;
+}
+
+static struct stack_item *
+pop_stack_item (struct stack_item *si)
+{
+ struct stack_item *dead = si;
+ si = si->prev;
+ xfree (dead->data);
+ xfree (dead);
+ return si;
+}
+
+/* Put here the code to store, into fi->saved_regs, the addresses of
+ the saved registers of frame described by FRAME_INFO. This
+ includes special registers such as pc and fp saved in special ways
+ in the stack frame. sp is even more special: the address we return
+ for it IS the sp for the next frame. */
+
+struct cris_unwind_cache *
+cris_frame_unwind_cache (struct frame_info *next_frame,
+ void **this_prologue_cache)
+{
+ CORE_ADDR pc;
+ struct cris_unwind_cache *info;
+ int i;
+
+ if ((*this_prologue_cache))
+ return (*this_prologue_cache);
+
+ info = FRAME_OBSTACK_ZALLOC (struct cris_unwind_cache);
+ (*this_prologue_cache) = info;
+ info->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+
+ /* Zero all fields. */
+ info->prev_sp = 0;
+ info->base = 0;
+ info->size = 0;
+ info->sp_offset = 0;
+ info->r8_offset = 0;
+ info->uses_frame = 0;
+ info->return_pc = 0;
+ info->leaf_function = 0;
+
+ /* Prologue analysis does the rest... */
+ if (cris_version () == 32)
+ crisv32_scan_prologue (frame_func_unwind (next_frame, NORMAL_FRAME),
+ next_frame, info);
+ else
+ cris_scan_prologue (frame_func_unwind (next_frame, NORMAL_FRAME),
+ next_frame, info);
+
+ return info;
+}
+
+/* Given a GDB frame, determine the address of the calling function's
+ frame. This will be used to create a new GDB frame struct. */
+
+static void
+cris_frame_this_id (struct frame_info *next_frame,
+ void **this_prologue_cache,
+ struct frame_id *this_id)
+{
+ struct cris_unwind_cache *info
+ = cris_frame_unwind_cache (next_frame, this_prologue_cache);
+ CORE_ADDR base;
+ CORE_ADDR func;
+ struct frame_id id;
+
+ /* The FUNC is easy. */
+ func = frame_func_unwind (next_frame, NORMAL_FRAME);
+
+ /* Hopefully the prologue analysis either correctly determined the
+ frame's base (which is the SP from the previous frame), or set
+ that base to "NULL". */
+ base = info->prev_sp;
+ if (base == 0)
+ return;
+
+ id = frame_id_build (base, func);
+
+ (*this_id) = id;
+}
+
+static void
+cris_frame_prev_register (struct frame_info *next_frame,
+ void **this_prologue_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, gdb_byte *bufferp)
+{
+ struct cris_unwind_cache *info
+ = cris_frame_unwind_cache (next_frame, this_prologue_cache);
+ trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, bufferp);
+}
+
+/* Assuming NEXT_FRAME->prev is a dummy, return the frame ID of that
+ dummy frame. The frame ID's base needs to match the TOS value
+ saved by save_dummy_frame_tos(), and the PC match the dummy frame's
+ breakpoint. */
+
+static struct frame_id
+cris_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_id_build (cris_unwind_sp (gdbarch, next_frame),
+ frame_pc_unwind (next_frame));
+}
+
+static CORE_ADDR
+cris_frame_align (struct gdbarch *gdbarch, CORE_ADDR sp)
+{
+ /* Align to the size of an instruction (so that they can safely be
+ pushed onto the stack). */
+ return sp & ~3;
+}
+
+static CORE_ADDR
+cris_push_dummy_code (struct gdbarch *gdbarch,
+ CORE_ADDR sp, CORE_ADDR funaddr, int using_gcc,
+ struct value **args, int nargs,
+ struct type *value_type,
+ CORE_ADDR *real_pc, CORE_ADDR *bp_addr)
+{
+ /* Allocate space sufficient for a breakpoint. */
+ sp = (sp - 4) & ~3;
+ /* Store the address of that breakpoint */
+ *bp_addr = sp;
+ /* CRIS always starts the call at the callee's entry point. */
+ *real_pc = funaddr;
+ return sp;
+}
+
+static CORE_ADDR
+cris_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
+ struct regcache *regcache, CORE_ADDR bp_addr,
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
+{
+ int stack_alloc;
+ int stack_offset;
+ int argreg;
+ int argnum;
+
+ CORE_ADDR regval;
+
+ /* The function's arguments and memory allocated by gdb for the arguments to
+ point at reside in separate areas on the stack.
+ Both frame pointers grow toward higher addresses. */
+ CORE_ADDR fp_arg;
+ CORE_ADDR fp_mem;
+
+ struct stack_item *si = NULL;
+
+ /* Push the return address. */
+ regcache_cooked_write_unsigned (regcache, SRP_REGNUM, bp_addr);
+
+ /* Are we returning a value using a structure return or a normal value
+ return? struct_addr is the address of the reserved space for the return
+ structure to be written on the stack. */
+ if (struct_return)
+ {
+ regcache_cooked_write_unsigned (regcache, STR_REGNUM, struct_addr);
+ }
+
+ /* Now load as many as possible of the first arguments into registers,
+ and push the rest onto the stack. */
+ argreg = ARG1_REGNUM;
+ stack_offset = 0;
+
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ int len;
+ char *val;
+ int reg_demand;
+ int i;
+
+ len = TYPE_LENGTH (value_type (args[argnum]));
+ val = (char *) value_contents (args[argnum]);
+
+ /* How may registers worth of storage do we need for this argument? */
+ reg_demand = (len / 4) + (len % 4 != 0 ? 1 : 0);
+
+ if (len <= (2 * 4) && (argreg + reg_demand - 1 <= ARG4_REGNUM))
+ {
+ /* Data passed by value. Fits in available register(s). */
+ for (i = 0; i < reg_demand; i++)
+ {
+ regcache_cooked_write_unsigned (regcache, argreg,
+ *(unsigned long *) val);
+ argreg++;
+ val += 4;
+ }
+ }
+ else if (len <= (2 * 4) && argreg <= ARG4_REGNUM)
+ {
+ /* Data passed by value. Does not fit in available register(s).
+ Use the register(s) first, then the stack. */
+ for (i = 0; i < reg_demand; i++)
+ {
+ if (argreg <= ARG4_REGNUM)
+ {
+ regcache_cooked_write_unsigned (regcache, argreg,
+ *(unsigned long *) val);
+ argreg++;
+ val += 4;
+ }
+ else
+ {
+ /* Push item for later so that pushed arguments
+ come in the right order. */
+ si = push_stack_item (si, val, 4);
+ val += 4;
+ }
+ }
+ }
+ else if (len > (2 * 4))
+ {
+ /* FIXME */
+ internal_error (__FILE__, __LINE__, _("We don't do this"));
+ }
+ else
+ {
+ /* Data passed by value. No available registers. Put it on
+ the stack. */
+ si = push_stack_item (si, val, len);
+ }
+ }
+
+ while (si)
+ {
+ /* fp_arg must be word-aligned (i.e., don't += len) to match
+ the function prologue. */
+ sp = (sp - si->len) & ~3;
+ write_memory (sp, si->data, si->len);
+ si = pop_stack_item (si);
+ }
+
+ /* Finally, update the SP register. */
+ regcache_cooked_write_unsigned (regcache, SP_REGNUM, sp);
-static void cris_dump_tdep (struct gdbarch *, struct ui_file *);
+ return sp;
+}
-static void cris_version_update (char *ignore_args, int from_tty,
- struct cmd_list_element *c);
+static const struct frame_unwind cris_frame_unwind =
+{
+ NORMAL_FRAME,
+ cris_frame_this_id,
+ cris_frame_prev_register
+};
-static void cris_mode_update (char *ignore_args, int from_tty,
- struct cmd_list_element *c);
+const struct frame_unwind *
+cris_frame_sniffer (struct frame_info *next_frame)
+{
+ return &cris_frame_unwind;
+}
-static void cris_abi_update (char *ignore_args, int from_tty,
- struct cmd_list_element *c);
+static CORE_ADDR
+cris_frame_base_address (struct frame_info *next_frame, void **this_cache)
+{
+ struct cris_unwind_cache *info
+ = cris_frame_unwind_cache (next_frame, this_cache);
+ return info->base;
+}
-static CORE_ADDR bfd_lookup_symbol (bfd *, const char *);
+static const struct frame_base cris_frame_base =
+{
+ &cris_frame_unwind,
+ cris_frame_base_address,
+ cris_frame_base_address,
+ cris_frame_base_address
+};
/* Frames information. The definition of the struct frame_info is
CORE_ADDR frame
CORE_ADDR pc
- int signal_handler_caller
+ enum frame_type type;
CORE_ADDR return_pc
int leaf_function
of the register PC. All other frames contain the content of the
register PC in the next frame.
- The variable signal_handler_caller is non-zero when the frame is
- associated with the call of a signal handler.
+ The variable `type' indicates the frame's type: normal, SIGTRAMP
+ (associated with a signal handler), dummy (associated with a dummy
+ frame).
The variable return_pc contains the address where execution should be
resumed when the present frame has finished, the return address.
the entire prologue is examined (0) or just enough instructions to
determine that it is a prologue (1). */
-CORE_ADDR
-cris_examine (CORE_ADDR ip, CORE_ADDR limit, struct frame_info *fi,
- int frameless_p)
+static CORE_ADDR
+cris_scan_prologue (CORE_ADDR pc, struct frame_info *next_frame,
+ struct cris_unwind_cache *info)
{
/* Present instruction. */
unsigned short insn;
/* move.d r<source_register>,rS */
short source_register;
- /* This frame is with respect to a leaf until a push srp is found. */
- fi->extra_info->leaf_function = 1;
+ /* Scan limit. */
+ int limit;
- /* This frame is without the FP until a push fp is found. */
- have_fp = 0;
+ /* This frame is with respect to a leaf until a push srp is found. */
+ if (info)
+ {
+ info->leaf_function = 1;
+ }
/* Assume nothing on stack. */
val = 0;
regsave = -1;
- /* No information about register contents so far. */
+ /* If we were called without a next_frame, that means we were called
+ from cris_skip_prologue which already tried to find the end of the
+ prologue through the symbol information. 64 instructions past current
+ pc is arbitrarily chosen, but at least it means we'll stop eventually. */
+ limit = next_frame ? frame_pc_unwind (next_frame) : pc + 64;
- /* We only want to know the end of the prologue when fi->saved_regs == 0.
- When the saved registers are allocated full information is required. */
- if (fi->saved_regs)
- {
- for (regno = 0; regno < NUM_REGS; regno++)
- fi->saved_regs[regno] = 0;
- }
-
/* Find the prologue instructions. */
- do
+ while (pc > 0 && pc < limit)
{
- insn = read_memory_unsigned_integer (ip, sizeof (short));
- ip += sizeof (short);
+ insn = read_memory_unsigned_integer (pc, 2);
+ pc += 2;
if (insn == 0xE1FC)
{
/* push <reg> 32 bit instruction */
- insn_next = read_memory_unsigned_integer (ip, sizeof (short));
- ip += sizeof (short);
+ insn_next = read_memory_unsigned_integer (pc, 2);
+ pc += 2;
regno = cris_get_operand2 (insn_next);
-
+ if (info)
+ {
+ info->sp_offset += 4;
+ }
/* This check, meant to recognize srp, used to be regno ==
(SRP_REGNUM - NUM_GENREGS), but that covers r11 also. */
if (insn_next == 0xBE7E)
{
- if (frameless_p)
- {
- return ip;
- }
- fi->extra_info->leaf_function = 0;
+ if (info)
+ {
+ info->leaf_function = 0;
+ }
}
- else if (regno == FP_REGNUM)
+ else if (insn_next == 0x8FEE)
{
- have_fp = 1;
+ /* push $r8 */
+ if (info)
+ {
+ info->r8_offset = info->sp_offset;
+ }
}
}
else if (insn == 0x866E)
{
/* move.d sp,r8 */
- if (frameless_p)
- {
- return ip;
- }
+ if (info)
+ {
+ info->uses_frame = 1;
+ }
continue;
}
else if (cris_get_operand2 (insn) == SP_REGNUM
&& cris_get_opcode (insn) == 0x000A)
{
/* subq <val>,sp */
- val = cris_get_quick_value (insn);
+ if (info)
+ {
+ info->sp_offset += cris_get_quick_value (insn);
+ }
}
else if (cris_get_mode (insn) == 0x0002
&& cris_get_opcode (insn) == 0x000F
&& cris_get_operand1 (insn) == SP_REGNUM)
{
/* movem r<regsave>,[sp] */
- if (frameless_p)
- {
- return ip;
- }
regsave = cris_get_operand2 (insn);
}
else if (cris_get_operand2 (insn) == SP_REGNUM
register. Used for CRIS v8 i.e. ETRAX 100 and newer if <val>
is between 64 and 128.
movem r<regsave>,[sp=sp-<val>] */
- val = -cris_get_signed_offset (insn);
- insn_next = read_memory_unsigned_integer (ip, sizeof (short));
- ip += sizeof (short);
+ if (info)
+ {
+ info->sp_offset += -cris_get_signed_offset (insn);
+ }
+ insn_next = read_memory_unsigned_integer (pc, 2);
+ pc += 2;
if (cris_get_mode (insn_next) == PREFIX_ASSIGN_MODE
&& cris_get_opcode (insn_next) == 0x000F
&& cris_get_size (insn_next) == 0x0003
&& cris_get_operand1 (insn_next) == SP_REGNUM)
{
- if (frameless_p)
- {
- return ip;
- }
regsave = cris_get_operand2 (insn_next);
}
else
{
/* The prologue ended before the limit was reached. */
- ip -= 2 * sizeof (short);
+ pc -= 4;
break;
}
}
&& cris_get_size (insn) == 0x0002)
{
/* move.d r<10..13>,r<0..15> */
- if (frameless_p)
- {
- return ip;
- }
source_register = cris_get_operand1 (insn);
/* FIXME? In the glibc solibs, the prologue might contain something
if (source_register < ARG1_REGNUM || source_register > ARG4_REGNUM)
{
/* The prologue ended before the limit was reached. */
- ip -= sizeof (short);
+ pc -= 2;
break;
}
}
- else if (cris_get_operand2 (insn) == FP_REGNUM
+ else if (cris_get_operand2 (insn) == CRIS_FP_REGNUM
/* The size is a fixed-size. */
&& ((insn & 0x0F00) >> 8) == 0x0001
/* A negative offset. */
&& (cris_get_signed_offset (insn) < 0))
{
/* move.S rZ,[r8-U] (?) */
- insn_next = read_memory_unsigned_integer (ip, sizeof (short));
- ip += sizeof (short);
+ insn_next = read_memory_unsigned_integer (pc, 2);
+ pc += 2;
regno = cris_get_operand2 (insn_next);
if ((regno >= 0 && regno < SP_REGNUM)
&& cris_get_mode (insn_next) == PREFIX_OFFSET_MODE
else
{
/* The prologue ended before the limit was reached. */
- ip -= 2 * sizeof (short);
+ pc -= 4;
break;
}
}
- else if (cris_get_operand2 (insn) == FP_REGNUM
+ else if (cris_get_operand2 (insn) == CRIS_FP_REGNUM
/* The size is a fixed-size. */
&& ((insn & 0x0F00) >> 8) == 0x0001
/* A positive offset. */
&& (cris_get_signed_offset (insn) > 0))
{
/* move.S [r8+U],rZ (?) */
- insn_next = read_memory_unsigned_integer (ip, sizeof (short));
- ip += sizeof (short);
+ insn_next = read_memory_unsigned_integer (pc, 2);
+ pc += 2;
regno = cris_get_operand2 (insn_next);
if ((regno >= 0 && regno < SP_REGNUM)
&& cris_get_mode (insn_next) == PREFIX_OFFSET_MODE
else
{
/* The prologue ended before the limit was reached. */
- ip -= 2 * sizeof (short);
+ pc -= 4;
break;
}
}
else
{
/* The prologue ended before the limit was reached. */
- ip -= sizeof (short);
+ pc -= 2;
break;
}
}
- while (ip < limit);
- /* We only want to know the end of the prologue when
- fi->saved_regs == 0. */
- if (!fi->saved_regs)
- return ip;
+ /* We only want to know the end of the prologue when next_frame and info
+ are NULL (called from cris_skip_prologue i.e.). */
+ if (next_frame == NULL && info == NULL)
+ {
+ return pc;
+ }
- if (have_fp)
+ info->size = info->sp_offset;
+
+ /* Compute the previous frame's stack pointer (which is also the
+ frame's ID's stack address), and this frame's base pointer. */
+ if (info->uses_frame)
+ {
+ ULONGEST this_base;
+ /* The SP was moved to the FP. This indicates that a new frame
+ was created. Get THIS frame's FP value by unwinding it from
+ the next frame. */
+ frame_unwind_unsigned_register (next_frame, CRIS_FP_REGNUM,
+ &this_base);
+ info->base = this_base;
+ info->saved_regs[CRIS_FP_REGNUM].addr = info->base;
+
+ /* The FP points at the last saved register. Adjust the FP back
+ to before the first saved register giving the SP. */
+ info->prev_sp = info->base + info->r8_offset;
+ }
+ else
{
- fi->saved_regs[FP_REGNUM] = FRAME_FP (fi);
+ ULONGEST this_base;
+ /* Assume that the FP is this frame's SP but with that pushed
+ stack space added back. */
+ frame_unwind_unsigned_register (next_frame, SP_REGNUM, &this_base);
+ info->base = this_base;
+ info->prev_sp = info->base + info->size;
+ }
- /* Calculate the addresses. */
- for (regno = regsave; regno >= 0; regno--)
- {
- fi->saved_regs[regno] = FRAME_FP (fi) - val;
- val -= 4;
- }
- if (fi->extra_info->leaf_function)
- {
- /* Set the register SP to contain the stack pointer of
- the caller. */
- fi->saved_regs[SP_REGNUM] = FRAME_FP (fi) + 4;
- }
+ /* Calculate the addresses for the saved registers on the stack. */
+ /* FIXME: The address calculation should really be done on the fly while
+ we're analyzing the prologue (we only hold one regsave value as it is
+ now). */
+ val = info->sp_offset;
+
+ for (regno = regsave; regno >= 0; regno--)
+ {
+ info->saved_regs[regno].addr = info->base + info->r8_offset - val;
+ val -= 4;
+ }
+
+ /* The previous frame's SP needed to be computed. Save the computed
+ value. */
+ trad_frame_set_value (info->saved_regs, SP_REGNUM, info->prev_sp);
+
+ if (!info->leaf_function)
+ {
+ /* SRP saved on the stack. But where? */
+ if (info->r8_offset == 0)
+ {
+ /* R8 not pushed yet. */
+ info->saved_regs[SRP_REGNUM].addr = info->base;
+ }
else
- {
- /* Set the register SP to contain the stack pointer of
- the caller. */
- fi->saved_regs[SP_REGNUM] = FRAME_FP (fi) + 8;
-
- /* Set the register SRP to contain the return address of
- the caller. */
- fi->saved_regs[SRP_REGNUM] = FRAME_FP (fi) + 4;
- }
+ {
+ /* R8 pushed, but SP may or may not be moved to R8 yet. */
+ info->saved_regs[SRP_REGNUM].addr = info->base + 4;
+ }
}
- return ip;
-}
-/* Advance pc beyond any function entry prologue instructions at pc
- to reach some "real" code. */
+ /* The PC is found in SRP (the actual register or located on the stack). */
+ info->saved_regs[PC_REGNUM] = info->saved_regs[SRP_REGNUM];
-CORE_ADDR
-cris_skip_prologue (CORE_ADDR pc)
-{
- return cris_skip_prologue_main (pc, 0);
+ return pc;
}
-/* As cris_skip_prologue, but stops as soon as it knows that the function
- has a frame. Its result is equal to its input pc if the function is
- frameless, unequal otherwise. */
-
-CORE_ADDR
-cris_skip_prologue_frameless_p (CORE_ADDR pc)
+static CORE_ADDR
+crisv32_scan_prologue (CORE_ADDR pc, struct frame_info *next_frame,
+ struct cris_unwind_cache *info)
{
- return cris_skip_prologue_main (pc, 1);
+ ULONGEST this_base;
+
+ /* Unlike the CRISv10 prologue scanner (cris_scan_prologue), this is not
+ meant to be a full-fledged prologue scanner. It is only needed for
+ the cases where we end up in code always lacking DWARF-2 CFI, notably:
+
+ * PLT stubs (library calls)
+ * call dummys
+ * signal trampolines
+
+ For those cases, it is assumed that there is no actual prologue; that
+ the stack pointer is not adjusted, and (as a consequence) the return
+ address is not pushed onto the stack. */
+
+ /* We only want to know the end of the prologue when next_frame and info
+ are NULL (called from cris_skip_prologue i.e.). */
+ if (next_frame == NULL && info == NULL)
+ {
+ return pc;
+ }
+
+ /* The SP is assumed to be unaltered. */
+ frame_unwind_unsigned_register (next_frame, SP_REGNUM, &this_base);
+ info->base = this_base;
+ info->prev_sp = this_base;
+
+ /* The PC is assumed to be found in SRP. */
+ info->saved_regs[PC_REGNUM] = info->saved_regs[SRP_REGNUM];
+
+ return pc;
}
+/* Advance pc beyond any function entry prologue instructions at pc
+ to reach some "real" code. */
+
/* Given a PC value corresponding to the start of a function, return the PC
of the first instruction after the function prologue. */
-CORE_ADDR
-cris_skip_prologue_main (CORE_ADDR pc, int frameless_p)
+static CORE_ADDR
+cris_skip_prologue (CORE_ADDR pc)
{
- struct frame_info fi;
- static struct frame_extra_info fei;
- struct symtab_and_line sal = find_pc_line (pc, 0);
- int best_limit;
+ CORE_ADDR func_addr, func_end;
+ struct symtab_and_line sal;
CORE_ADDR pc_after_prologue;
- /* frame_info now contains dynamic memory. Since fi is a dummy here,
- I use static memory for extra_info, and don't bother allocating
- memory for saved_regs. */
- fi.saved_regs = 0;
- fi.extra_info = &fei;
-
- /* If there is no symbol information then sal.end == 0, and we end up
- examining only the first instruction in the function prologue.
- Exaggerating the limit seems to be harmless. */
- if (sal.end > 0)
- best_limit = sal.end;
+ /* If we have line debugging information, then the end of the prologue
+ should the first assembly instruction of the first source line. */
+ if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+ {
+ sal = find_pc_line (func_addr, 0);
+ if (sal.end > 0 && sal.end < func_end)
+ return sal.end;
+ }
+
+ if (cris_version () == 32)
+ pc_after_prologue = crisv32_scan_prologue (pc, NULL, NULL);
else
- best_limit = pc + 100;
+ pc_after_prologue = cris_scan_prologue (pc, NULL, NULL);
- pc_after_prologue = cris_examine (pc, best_limit, &fi, frameless_p);
return pc_after_prologue;
}
+static CORE_ADDR
+cris_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ ULONGEST pc;
+ frame_unwind_unsigned_register (next_frame, PC_REGNUM, &pc);
+ return pc;
+}
+
+static CORE_ADDR
+cris_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ ULONGEST sp;
+ frame_unwind_unsigned_register (next_frame, SP_REGNUM, &sp);
+ return sp;
+}
+
/* Use the program counter to determine the contents and size of a breakpoint
instruction. It returns a pointer to a string of bytes that encode a
breakpoint instruction, stores the length of the string to *lenptr, and
adjusts pcptr (if necessary) to point to the actual memory location where
the breakpoint should be inserted. */
-const unsigned char *
+static const unsigned char *
cris_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
{
- static unsigned char break_insn[] = {0x38, 0xe9};
+ static unsigned char break8_insn[] = {0x38, 0xe9};
+ static unsigned char break15_insn[] = {0x3f, 0xe9};
*lenptr = 2;
- return break_insn;
-}
-
-/* Returns the register SRP (subroutine return pointer) which must contain
- the content of the register PC after a function call. */
-
-static CORE_ADDR
-cris_saved_pc_after_call (struct frame_info *frame)
-{
- return read_register (SRP_REGNUM);
+ if (cris_mode () == cris_mode_guru)
+ return break15_insn;
+ else
+ return break8_insn;
}
/* Returns 1 if spec_reg is applicable to the current gdbarch's CRIS version,
0 otherwise. */
-int
+static int
cris_spec_reg_applicable (struct cris_spec_reg spec_reg)
{
int version = cris_version ();
case cris_ver_warning:
/* Indeterminate/obsolete. */
return 0;
- case cris_ver_sim:
- /* Simulator only. */
- return 0;
case cris_ver_v0_3:
return (version >= 0 && version <= 3);
case cris_ver_v3p:
return (version == 8 || version == 9);
case cris_ver_v8p:
return (version >= 8);
+ case cris_ver_v0_10:
+ return (version >= 0 && version <= 10);
+ case cris_ver_v3_10:
+ return (version >= 3 && version <= 10);
+ case cris_ver_v8_10:
+ return (version >= 8 && version <= 10);
+ case cris_ver_v10:
+ return (version == 10);
case cris_ver_v10p:
return (version >= 10);
+ case cris_ver_v32p:
+ return (version >= 32);
default:
/* Invalid cris version. */
return 0;
/* Returns the register size in unit byte. Returns 0 for an unimplemented
register, -1 for an invalid register. */
-int
+static int
cris_register_size (int regno)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
int i;
int spec_regno;
/* General registers (R0 - R15) are 32 bits. */
return 4;
}
- else if (regno >= NUM_GENREGS && regno < NUM_REGS)
+ else if (regno >= NUM_GENREGS && regno < (NUM_GENREGS + NUM_SPECREGS))
{
/* Special register (R16 - R31). cris_spec_regs is zero-based.
Adjust regno accordingly. */
spec_regno = regno - NUM_GENREGS;
- /* The entries in cris_spec_regs are stored in register number order,
- which means we can shortcut into the array when searching it. */
- for (i = spec_regno; cris_spec_regs[i].name != NULL; i++)
+ for (i = 0; cris_spec_regs[i].name != NULL; i++)
{
if (cris_spec_regs[i].number == spec_regno
&& cris_spec_reg_applicable (cris_spec_regs[i]))
/* Special register not applicable to this CRIS version. */
return 0;
}
- else
+ else if (regno >= PC_REGNUM && regno < NUM_REGS)
{
- /* Invalid register. */
- return -1;
+ /* This will apply to CRISv32 only where there are additional registers
+ after the special registers (pseudo PC and support registers). */
+ return 4;
}
+
+
+ return -1;
}
/* Nonzero if regno should not be fetched from the target. This is the case
for unimplemented (size 0) and non-existant registers. */
-int
+static int
cris_cannot_fetch_register (int regno)
{
return ((regno < 0 || regno >= NUM_REGS)
/* Nonzero if regno should not be written to the target, for various
reasons. */
-int
+static int
cris_cannot_store_register (int regno)
{
/* There are three kinds of registers we refuse to write to.
/* Writing has no effect. */
return 1;
- else if (cris_mode () == CRIS_MODE_USER)
- {
- if (regno == IBR_REGNUM || regno == BAR_REGNUM || regno == BRP_REGNUM
- || regno == IRP_REGNUM)
- /* Read-only in user mode. */
- return 1;
- }
+ /* IBR, BAR, BRP and IRP are read-only in user mode. Let the debug
+ agent decide whether they are writable. */
return 0;
}
-/* Returns the register offset for the first byte of register regno's space
- in the saved register state. Returns -1 for an invalid or unimplemented
- register. */
-
-int
-cris_register_offset (int regno)
-{
- int i;
- int reg_size;
- int offset = 0;
-
- if (regno >= 0 && regno < NUM_REGS)
- {
- /* FIXME: The offsets should be cached and calculated only once,
- when the architecture being debugged has changed. */
- for (i = 0; i < regno; i++)
- offset += cris_register_size (i);
-
- return offset;
- }
- else
- {
- /* Invalid register. */
- return -1;
- }
-}
-
-/* Return the GDB type (defined in gdbtypes.c) for the "standard" data type
- of data in register regno. */
-
-struct type *
-cris_register_virtual_type (int regno)
-{
- if (regno == SP_REGNUM || regno == PC_REGNUM
- || (regno > P8_REGNUM && regno < USP_REGNUM))
- {
- /* SP, PC, IBR, IRP, SRP, BAR, DCCR, BRP */
- return lookup_pointer_type (builtin_type_void);
- }
- else if (regno == P8_REGNUM || regno == USP_REGNUM
- || (regno >= 0 && regno < SP_REGNUM))
- {
- /* R0 - R13, P8, P15 */
- return builtin_type_unsigned_long;
- }
- else if (regno > P3_REGNUM && regno < P8_REGNUM)
- {
- /* P4, CCR, DCR0, DCR1 */
- return builtin_type_unsigned_short;
- }
- else if (regno > PC_REGNUM && regno < P4_REGNUM)
- {
- /* P0, P1, P2, P3 */
- return builtin_type_unsigned_char;
- }
- else
- {
- /* Invalid register. */
- return builtin_type_void;
- }
-}
-
-/* Stores a function return value of type type, where valbuf is the address
- of the value to be stored. */
-
-/* In the original CRIS ABI, R10 is used to store return values. */
-
-void
-cris_abi_original_store_return_value (struct type *type, char *valbuf)
-{
- int len = TYPE_LENGTH (type);
-
- if (len <= REGISTER_SIZE)
- write_register_bytes (REGISTER_BYTE (RET_REGNUM), valbuf, len);
- else
- internal_error (__FILE__, __LINE__, "cris_abi_original_store_return_value: type length too large.");
-}
-
-/* In the CRIS ABI V2, R10 and R11 are used to store return values. */
-
-void
-cris_abi_v2_store_return_value (struct type *type, char *valbuf)
-{
- int len = TYPE_LENGTH (type);
-
- if (len <= 2 * REGISTER_SIZE)
- {
- /* Note that this works since R10 and R11 are consecutive registers. */
- write_register_bytes (REGISTER_BYTE (RET_REGNUM), valbuf, len);
- }
- else
- internal_error (__FILE__, __LINE__, "cris_abi_v2_store_return_value: type length too large.");
-}
-
-/* Return the name of register regno as a string. Return NULL for an invalid or
- unimplemented register. */
-
-const char *
-cris_register_name (int regno)
-{
- static char *cris_genreg_names[] =
- { "r0", "r1", "r2", "r3", \
- "r4", "r5", "r6", "r7", \
- "r8", "r9", "r10", "r11", \
- "r12", "r13", "sp", "pc" };
-
- int i;
- int spec_regno;
-
- if (regno >= 0 && regno < NUM_GENREGS)
- {
- /* General register. */
- return cris_genreg_names[regno];
- }
- else if (regno >= NUM_GENREGS && regno < NUM_REGS)
- {
- /* Special register (R16 - R31). cris_spec_regs is zero-based.
- Adjust regno accordingly. */
- spec_regno = regno - NUM_GENREGS;
-
- /* The entries in cris_spec_regs are stored in register number order,
- which means we can shortcut into the array when searching it. */
- for (i = spec_regno; cris_spec_regs[i].name != NULL; i++)
- {
- if (cris_spec_regs[i].number == spec_regno
- && cris_spec_reg_applicable (cris_spec_regs[i]))
- /* Go with the first applicable register. */
- return cris_spec_regs[i].name;
- }
- /* Special register not applicable to this CRIS version. */
- return NULL;
- }
- else
- {
- /* Invalid register. */
- return NULL;
- }
-}
-
-int
-cris_register_bytes_ok (long bytes)
-{
- return (bytes == REGISTER_BYTES);
-}
-
-/* Extract from an array regbuf containing the raw register state a function
- return value of type type, and copy that, in virtual format, into
- valbuf. */
-
-/* In the original CRIS ABI, R10 is used to return values. */
-
-void
-cris_abi_original_extract_return_value (struct type *type, char *regbuf,
- char *valbuf)
-{
- int len = TYPE_LENGTH (type);
-
- if (len <= REGISTER_SIZE)
- memcpy (valbuf, regbuf + REGISTER_BYTE (RET_REGNUM), len);
- else
- internal_error (__FILE__, __LINE__, "cris_abi_original_extract_return_value: type length too large");
-}
-
-/* In the CRIS ABI V2, R10 and R11 are used to store return values. */
-
-void
-cris_abi_v2_extract_return_value (struct type *type, char *regbuf,
- char *valbuf)
-{
- int len = TYPE_LENGTH (type);
-
- if (len <= 2 * REGISTER_SIZE)
- memcpy (valbuf, regbuf + REGISTER_BYTE (RET_REGNUM), len);
- else
- internal_error (__FILE__, __LINE__, "cris_abi_v2_extract_return_value: type length too large");
-}
-
-/* Store the address of the place in which to copy the structure the
- subroutine will return. In the CRIS ABI, R9 is used in order to pass
- the address of the allocated area where a structure return value must
- be stored. R9 is call-clobbered, which means we must save it here for
- later use. */
+/* Nonzero if regno should not be fetched from the target. This is the case
+ for unimplemented (size 0) and non-existant registers. */
-void
-cris_store_struct_return (CORE_ADDR addr, CORE_ADDR sp)
+static int
+crisv32_cannot_fetch_register (int regno)
{
- write_register (STR_REGNUM, addr);
- struct_return_address = addr;
+ return ((regno < 0 || regno >= NUM_REGS)
+ || (cris_register_size (regno) == 0));
}
-/* Extract from regbuf the address where a function should return a
- structure value. It's not there in the CRIS ABI, so we must do it another
- way. */
+/* Nonzero if regno should not be written to the target, for various
+ reasons. */
-CORE_ADDR
-cris_extract_struct_value_address (char *regbuf)
+static int
+crisv32_cannot_store_register (int regno)
{
- return struct_return_address;
-}
-
-/* Returns 1 if a value of the given type being returned from a function
- must have space allocated for it on the stack. gcc_p is true if the
- function being considered is known to have been compiled by GCC.
- In the CRIS ABI, structure return values are passed to the called
- function by reference in register R9 to a caller-allocated area, so
- this is always true. */
+ /* There are three kinds of registers we refuse to write to.
+ 1. Those that not implemented.
+ 2. Those that are read-only (depends on the processor mode).
+ 3. Those registers to which a write has no effect.
+ */
-int
-cris_use_struct_convention (int gcc_p, struct type *type)
-{
- return 1;
-}
+ if (regno < 0 || regno >= NUM_REGS || cris_register_size (regno) == 0)
+ /* Not implemented. */
+ return 1;
-/* Returns 1 if the given type will be passed by pointer rather than
- directly. */
+ else if (regno == VR_REGNUM)
+ /* Read-only. */
+ return 1;
-/* In the original CRIS ABI, arguments shorter than or equal to 32 bits are
- passed by value. */
+ else if (regno == BZ_REGNUM || regno == WZ_REGNUM || regno == DZ_REGNUM)
+ /* Writing has no effect. */
+ return 1;
-int
-cris_abi_original_reg_struct_has_addr (int gcc_p, struct type *type)
-{
- return (TYPE_LENGTH (type) > 4);
+ /* Many special registers are read-only in user mode. Let the debug
+ agent decide whether they are writable. */
+
+ return 0;
}
-/* In the CRIS ABI V2, arguments shorter than or equal to 64 bits are passed
- by value. */
+/* Return the GDB type (defined in gdbtypes.c) for the "standard" data type
+ of data in register regno. */
-int
-cris_abi_v2_reg_struct_has_addr (int gcc_p, struct type *type)
-{
- return (TYPE_LENGTH (type) > 8);
+static struct type *
+cris_register_type (struct gdbarch *gdbarch, int regno)
+{
+ if (regno == PC_REGNUM)
+ return builtin_type_void_func_ptr;
+ else if (regno == SP_REGNUM || regno == CRIS_FP_REGNUM)
+ return builtin_type_void_data_ptr;
+ else if ((regno >= 0 && regno < SP_REGNUM)
+ || (regno >= MOF_REGNUM && regno <= USP_REGNUM))
+ /* Note: R8 taken care of previous clause. */
+ return builtin_type_uint32;
+ else if (regno >= P4_REGNUM && regno <= CCR_REGNUM)
+ return builtin_type_uint16;
+ else if (regno >= P0_REGNUM && regno <= VR_REGNUM)
+ return builtin_type_uint8;
+ else
+ /* Invalid (unimplemented) register. */
+ return builtin_type_int0;
}
-/* Returns 1 if the function invocation represented by fi does not have a
- stack frame associated with it. Otherwise return 0. */
-
-int
-cris_frameless_function_invocation (struct frame_info *fi)
-{
- if (fi->signal_handler_caller)
- return 0;
+static struct type *
+crisv32_register_type (struct gdbarch *gdbarch, int regno)
+{
+ if (regno == PC_REGNUM)
+ return builtin_type_void_func_ptr;
+ else if (regno == SP_REGNUM || regno == CRIS_FP_REGNUM)
+ return builtin_type_void_data_ptr;
+ else if ((regno >= 0 && regno <= ACR_REGNUM)
+ || (regno >= EXS_REGNUM && regno <= SPC_REGNUM)
+ || (regno == PID_REGNUM)
+ || (regno >= S0_REGNUM && regno <= S15_REGNUM))
+ /* Note: R8 and SP taken care of by previous clause. */
+ return builtin_type_uint32;
+ else if (regno == WZ_REGNUM)
+ return builtin_type_uint16;
+ else if (regno == BZ_REGNUM || regno == VR_REGNUM || regno == SRS_REGNUM)
+ return builtin_type_uint8;
else
- return frameless_look_for_prologue (fi);
+ {
+ /* Invalid (unimplemented) register. Should not happen as there are
+ no unimplemented CRISv32 registers. */
+ warning (_("crisv32_register_type: unknown regno %d"), regno);
+ return builtin_type_int0;
+ }
}
-/* See frame.h. Determines the address of all registers in the current stack
- frame storing each in frame->saved_regs. Space for frame->saved_regs shall
- be allocated by FRAME_INIT_SAVED_REGS using either frame_saved_regs_zalloc
- or frame_obstack_alloc. */
-
-void
-cris_frame_init_saved_regs (struct frame_info *fi)
-{
- CORE_ADDR ip;
- struct symtab_and_line sal;
- int best_limit;
- char *dummy_regs = deprecated_generic_find_dummy_frame (fi->pc, fi->frame);
-
- /* Examine the entire prologue. */
- register int frameless_p = 0;
+/* Stores a function return value of type type, where valbuf is the address
+ of the value to be stored. */
- /* Has this frame's registers already been initialized? */
- if (fi->saved_regs)
- return;
+/* In the CRIS ABI, R10 and R11 are used to store return values. */
- frame_saved_regs_zalloc (fi);
+static void
+cris_store_return_value (struct type *type, struct regcache *regcache,
+ const void *valbuf)
+{
+ ULONGEST val;
+ int len = TYPE_LENGTH (type);
- if (dummy_regs)
+ if (len <= 4)
{
- /* I don't see this ever happening, considering the context in which
- cris_frame_init_saved_regs is called (always when we're not in
- a dummy frame). */
- memcpy (&fi->saved_regs, dummy_regs, sizeof (fi->saved_regs));
+ /* Put the return value in R10. */
+ val = extract_unsigned_integer (valbuf, len);
+ regcache_cooked_write_unsigned (regcache, ARG1_REGNUM, val);
}
- else
- {
- ip = get_pc_function_start (fi->pc);
- sal = find_pc_line (ip, 0);
-
- /* If there is no symbol information then sal.end == 0, and we end up
- examining only the first instruction in the function prologue.
- Exaggerating the limit seems to be harmless. */
- if (sal.end > 0)
- best_limit = sal.end;
- else
- best_limit = ip + 100;
-
- cris_examine (ip, best_limit, fi, frameless_p);
+ else if (len <= 8)
+ {
+ /* Put the return value in R10 and R11. */
+ val = extract_unsigned_integer (valbuf, 4);
+ regcache_cooked_write_unsigned (regcache, ARG1_REGNUM, val);
+ val = extract_unsigned_integer ((char *)valbuf + 4, len - 4);
+ regcache_cooked_write_unsigned (regcache, ARG2_REGNUM, val);
}
+ else
+ error (_("cris_store_return_value: type length too large."));
}
-/* Initialises the extra frame information at the creation of a new frame.
- The inparameter fromleaf is 0 when the call is from create_new_frame.
- When the call is from get_prev_frame_info, fromleaf is determined by
- cris_frameless_function_invocation. */
+/* Return the name of register regno as a string. Return NULL for an invalid or
+ unimplemented register. */
-void
-cris_init_extra_frame_info (int fromleaf, struct frame_info *fi)
+static const char *
+cris_special_register_name (int regno)
{
- if (fi->next)
+ int spec_regno;
+ int i;
+
+ /* Special register (R16 - R31). cris_spec_regs is zero-based.
+ Adjust regno accordingly. */
+ spec_regno = regno - NUM_GENREGS;
+
+ /* Assume nothing about the layout of the cris_spec_regs struct
+ when searching. */
+ for (i = 0; cris_spec_regs[i].name != NULL; i++)
{
- /* Called from get_prev_frame. */
- fi->pc = FRAME_SAVED_PC (fi->next);
+ if (cris_spec_regs[i].number == spec_regno
+ && cris_spec_reg_applicable (cris_spec_regs[i]))
+ /* Go with the first applicable register. */
+ return cris_spec_regs[i].name;
}
-
- fi->extra_info = (struct frame_extra_info *)
- frame_obstack_alloc (sizeof (struct frame_extra_info));
-
- fi->extra_info->return_pc = 0;
- fi->extra_info->leaf_function = 0;
+ /* Special register not applicable to this CRIS version. */
+ return NULL;
+}
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- {
- /* We need to setup fi->frame here because run_stack_dummy gets it wrong
- by assuming it's always FP. */
- fi->frame = generic_read_register_dummy (fi->pc, fi->frame, SP_REGNUM);
- fi->extra_info->return_pc =
- generic_read_register_dummy (fi->pc, fi->frame, PC_REGNUM);
+static const char *
+cris_register_name (int regno)
+{
+ static char *cris_genreg_names[] =
+ { "r0", "r1", "r2", "r3", \
+ "r4", "r5", "r6", "r7", \
+ "r8", "r9", "r10", "r11", \
+ "r12", "r13", "sp", "pc" };
- /* FIXME: Is this necessarily true? */
- fi->extra_info->leaf_function = 0;
+ if (regno >= 0 && regno < NUM_GENREGS)
+ {
+ /* General register. */
+ return cris_genreg_names[regno];
+ }
+ else if (regno >= NUM_GENREGS && regno < NUM_REGS)
+ {
+ return cris_special_register_name (regno);
}
else
{
- cris_frame_init_saved_regs (fi);
-
- /* Check fromleaf/frameless_function_invocation. (FIXME) */
-
- if (fi->saved_regs[SRP_REGNUM] != 0)
- {
- /* SRP was saved on the stack; non-leaf function. */
- fi->extra_info->return_pc =
- read_memory_integer (fi->saved_regs[SRP_REGNUM],
- REGISTER_RAW_SIZE (SRP_REGNUM));
- }
- else
- {
- /* SRP is still in a register; leaf function. */
- fi->extra_info->return_pc = read_register (SRP_REGNUM);
- /* FIXME: Should leaf_function be set to 1 here? */
- fi->extra_info->leaf_function = 1;
- }
+ /* Invalid register. */
+ return NULL;
}
}
-/* Return the content of the frame pointer in the present frame. In other
- words, determine the address of the calling function's frame. */
+static const char *
+crisv32_register_name (int regno)
+{
+ static char *crisv32_genreg_names[] =
+ { "r0", "r1", "r2", "r3", \
+ "r4", "r5", "r6", "r7", \
+ "r8", "r9", "r10", "r11", \
+ "r12", "r13", "sp", "acr"
+ };
+
+ static char *crisv32_sreg_names[] =
+ { "s0", "s1", "s2", "s3", \
+ "s4", "s5", "s6", "s7", \
+ "s8", "s9", "s10", "s11", \
+ "s12", "s13", "s14", "s15"
+ };
-CORE_ADDR
-cris_frame_chain (struct frame_info *fi)
-{
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+ if (regno >= 0 && regno < NUM_GENREGS)
+ {
+ /* General register. */
+ return crisv32_genreg_names[regno];
+ }
+ else if (regno >= NUM_GENREGS && regno < (NUM_GENREGS + NUM_SPECREGS))
+ {
+ return cris_special_register_name (regno);
+ }
+ else if (regno == PC_REGNUM)
{
- return fi->frame;
+ return "pc";
}
- else if (!inside_entry_file (fi->pc))
+ else if (regno >= S0_REGNUM && regno <= S15_REGNUM)
{
- return read_memory_unsigned_integer (FRAME_FP (fi), 4);
+ return crisv32_sreg_names[regno - S0_REGNUM];
}
else
{
- return 0;
+ /* Invalid register. */
+ return NULL;
}
}
-/* Return the saved PC (which equals the return address) of this frame. */
+/* Convert DWARF register number REG to the appropriate register
+ number used by GDB. */
-CORE_ADDR
-cris_frame_saved_pc (struct frame_info *fi)
-{
- return fi->extra_info->return_pc;
+static int
+cris_dwarf2_reg_to_regnum (int reg)
+{
+ /* We need to re-map a couple of registers (SRP is 16 in Dwarf-2 register
+ numbering, MOF is 18).
+ Adapted from gcc/config/cris/cris.h. */
+ static int cris_dwarf_regmap[] = {
+ 0, 1, 2, 3,
+ 4, 5, 6, 7,
+ 8, 9, 10, 11,
+ 12, 13, 14, 15,
+ 27, -1, -1, -1,
+ -1, -1, -1, 23,
+ -1, -1, -1, 27,
+ -1, -1, -1, -1
+ };
+ int regnum = -1;
+
+ if (reg >= 0 && reg < ARRAY_SIZE (cris_dwarf_regmap))
+ regnum = cris_dwarf_regmap[reg];
+
+ if (regnum == -1)
+ warning (_("Unmapped DWARF Register #%d encountered."), reg);
+
+ return regnum;
}
-/* Return the address of the argument block for the frame described
- by struct frame_info. */
+/* DWARF-2 frame support. */
-CORE_ADDR
-cris_frame_args_address (struct frame_info *fi)
+static void
+cris_dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum,
+ struct dwarf2_frame_state_reg *reg,
+ struct frame_info *next_frame)
{
- return FRAME_FP (fi);
-}
+ /* The return address column. */
+ if (regnum == PC_REGNUM)
+ reg->how = DWARF2_FRAME_REG_RA;
-/* Return the address of the locals block for the frame
- described by struct frame_info. */
-
-CORE_ADDR
-cris_frame_locals_address (struct frame_info *fi)
-{
- return FRAME_FP (fi);
+ /* The call frame address. */
+ else if (regnum == SP_REGNUM)
+ reg->how = DWARF2_FRAME_REG_CFA;
}
-/* Setup the function arguments for calling a function in the inferior. */
-
-CORE_ADDR
-cris_abi_original_push_arguments (int nargs, struct value **args,
- CORE_ADDR sp, int struct_return,
- CORE_ADDR struct_addr)
-{
- int stack_alloc;
- int stack_offset;
- int argreg;
- int argnum;
- struct type *type;
- int len;
- CORE_ADDR regval;
- char *val;
-
- /* Data and parameters reside in different areas on the stack.
- Both frame pointers grow toward higher addresses. */
- CORE_ADDR fp_params;
- CORE_ADDR fp_data;
-
- /* Are we returning a value using a structure return or a normal value
- return? struct_addr is the address of the reserved space for the return
- structure to be written on the stack. */
- if (struct_return)
- {
- write_register (STR_REGNUM, struct_addr);
- }
-
- /* Make sure there's space on the stack. Allocate space for data and a
- parameter to refer to that data. */
- for (argnum = 0, stack_alloc = 0; argnum < nargs; argnum++)
- stack_alloc += (TYPE_LENGTH (VALUE_TYPE (args[argnum])) + REGISTER_SIZE);
- sp -= stack_alloc;
- /* We may over-allocate a little here, but that won't hurt anything. */
-
- /* Initialize stack frame pointers. */
- fp_params = sp;
- fp_data = sp + (nargs * REGISTER_SIZE);
-
- /* Now load as many as possible of the first arguments into
- registers, and push the rest onto the stack. */
- argreg = ARG1_REGNUM;
- stack_offset = 0;
-
- for (argnum = 0; argnum < nargs; argnum++)
- {
- type = VALUE_TYPE (args[argnum]);
- len = TYPE_LENGTH (type);
- val = (char *) VALUE_CONTENTS (args[argnum]);
-
- if (len <= REGISTER_SIZE && argreg <= ARG4_REGNUM)
- {
- /* Data fits in a register; put it in the first available
- register. */
- write_register (argreg, *(unsigned long *) val);
- argreg++;
- }
- else if (len > REGISTER_SIZE && argreg <= ARG4_REGNUM)
- {
- /* Data does not fit in register; pass it on the stack and
- put its address in the first available register. */
- write_memory (fp_data, val, len);
- write_register (argreg, fp_data);
- fp_data += len;
- argreg++;
- }
- else if (len > REGISTER_SIZE)
- {
- /* Data does not fit in register; put both data and
- parameter on the stack. */
- write_memory (fp_data, val, len);
- write_memory (fp_params, (char *) (&fp_data), REGISTER_SIZE);
- fp_data += len;
- fp_params += REGISTER_SIZE;
- }
- else
- {
- /* Data fits in a register, but we are out of registers;
- put the parameter on the stack. */
- write_memory (fp_params, val, REGISTER_SIZE);
- fp_params += REGISTER_SIZE;
- }
- }
+/* Extract from an array regbuf containing the raw register state a function
+ return value of type type, and copy that, in virtual format, into
+ valbuf. */
- return sp;
-}
+/* In the CRIS ABI, R10 and R11 are used to store return values. */
-CORE_ADDR
-cris_abi_v2_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
- int struct_return, CORE_ADDR struct_addr)
+static void
+cris_extract_return_value (struct type *type, struct regcache *regcache,
+ void *valbuf)
{
- int stack_alloc;
- int stack_offset;
- int argreg;
- int argnum;
-
- CORE_ADDR regval;
-
- /* The function's arguments and memory allocated by gdb for the arguments to
- point at reside in separate areas on the stack.
- Both frame pointers grow toward higher addresses. */
- CORE_ADDR fp_arg;
- CORE_ADDR fp_mem;
+ ULONGEST val;
+ int len = TYPE_LENGTH (type);
- /* Are we returning a value using a structure return or a normal value
- return? struct_addr is the address of the reserved space for the return
- structure to be written on the stack. */
- if (struct_return)
+ if (len <= 4)
{
- write_register (STR_REGNUM, struct_addr);
+ /* Get the return value from R10. */
+ regcache_cooked_read_unsigned (regcache, ARG1_REGNUM, &val);
+ store_unsigned_integer (valbuf, len, val);
}
-
- /* Allocate enough to keep things word-aligned on both parts of the
- stack. */
- stack_alloc = 0;
- for (argnum = 0; argnum < nargs; argnum++)
+ else if (len <= 8)
{
- int len;
- int reg_demand;
-
- len = TYPE_LENGTH (VALUE_TYPE (args[argnum]));
- reg_demand = (len / REGISTER_SIZE) + (len % REGISTER_SIZE != 0 ? 1 : 0);
-
- /* reg_demand * REGISTER_SIZE is the amount of memory we might need to
- allocate for this argument. 2 * REGISTER_SIZE is the amount of stack
- space we might need to pass the argument itself (either by value or by
- reference). */
- stack_alloc += (reg_demand * REGISTER_SIZE + 2 * REGISTER_SIZE);
+ /* Get the return value from R10 and R11. */
+ regcache_cooked_read_unsigned (regcache, ARG1_REGNUM, &val);
+ store_unsigned_integer (valbuf, 4, val);
+ regcache_cooked_read_unsigned (regcache, ARG2_REGNUM, &val);
+ store_unsigned_integer ((char *)valbuf + 4, len - 4, val);
}
- sp -= stack_alloc;
- /* We may over-allocate a little here, but that won't hurt anything. */
-
- /* Initialize frame pointers. */
- fp_arg = sp;
- fp_mem = sp + (nargs * (2 * REGISTER_SIZE));
+ else
+ error (_("cris_extract_return_value: type length too large"));
+}
- /* Now load as many as possible of the first arguments into registers,
- and push the rest onto the stack. */
- argreg = ARG1_REGNUM;
- stack_offset = 0;
+/* Handle the CRIS return value convention. */
- for (argnum = 0; argnum < nargs; argnum++)
- {
- int len;
- char *val;
- int reg_demand;
- int i;
-
- len = TYPE_LENGTH (VALUE_TYPE (args[argnum]));
- val = (char *) VALUE_CONTENTS (args[argnum]);
-
- /* How may registers worth of storage do we need for this argument? */
- reg_demand = (len / REGISTER_SIZE) + (len % REGISTER_SIZE != 0 ? 1 : 0);
-
- if (len <= (2 * REGISTER_SIZE)
- && (argreg + reg_demand - 1 <= ARG4_REGNUM))
- {
- /* Data passed by value. Fits in available register(s). */
- for (i = 0; i < reg_demand; i++)
- {
- write_register (argreg, *(unsigned long *) val);
- argreg++;
- val += REGISTER_SIZE;
- }
- }
- else if (len <= (2 * REGISTER_SIZE) && argreg <= ARG4_REGNUM)
- {
- /* Data passed by value. Does not fit in available register(s).
- Use the register(s) first, then the stack. */
- for (i = 0; i < reg_demand; i++)
- {
- if (argreg <= ARG4_REGNUM)
- {
- write_register (argreg, *(unsigned long *) val);
- argreg++;
- val += REGISTER_SIZE;
- }
- else
- {
- /* I guess this memory write could write the remaining data
- all at once instead of in REGISTER_SIZE chunks. */
- write_memory (fp_arg, val, REGISTER_SIZE);
- fp_arg += REGISTER_SIZE;
- val += REGISTER_SIZE;
- }
- }
- }
- else if (len > (2 * REGISTER_SIZE))
- {
- /* Data passed by reference. Put it on the stack. */
- write_memory (fp_mem, val, len);
- write_memory (fp_arg, (char *) (&fp_mem), REGISTER_SIZE);
-
- /* fp_mem need not be word-aligned since it's just a chunk of
- memory being pointed at. That is, += len would do. */
- fp_mem += reg_demand * REGISTER_SIZE;
- fp_arg += REGISTER_SIZE;
- }
- else
- {
- /* Data passed by value. No available registers. Put it on
- the stack. */
- write_memory (fp_arg, val, len);
+static enum return_value_convention
+cris_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache, gdb_byte *readbuf,
+ const gdb_byte *writebuf)
+{
+ if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION
+ || TYPE_LENGTH (type) > 8)
+ /* Structs, unions, and anything larger than 8 bytes (2 registers)
+ goes on the stack. */
+ return RETURN_VALUE_STRUCT_CONVENTION;
- /* fp_arg must be word-aligned (i.e., don't += len) to match
- the function prologue. */
- fp_arg += reg_demand * REGISTER_SIZE;
- }
- }
+ if (readbuf)
+ cris_extract_return_value (type, regcache, readbuf);
+ if (writebuf)
+ cris_store_return_value (type, regcache, writebuf);
- return sp;
+ return RETURN_VALUE_REGISTER_CONVENTION;
}
-/* Never put the return address on the stack. The register SRP is pushed
- by the called function unless it is a leaf-function. Due to the BRP
- register the PC will change when continue is sent. */
-
-CORE_ADDR
-cris_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
-{
- write_register (SRP_REGNUM, CALL_DUMMY_ADDRESS ());
- return sp;
-}
+/* Returns 1 if the given type will be passed by pointer rather than
+ directly. */
-/* Restore the machine to the state it had before the current frame
- was created. Discard the innermost frame from the stack and restore
- all saved registers. */
+/* In the CRIS ABI, arguments shorter than or equal to 64 bits are passed
+ by value. */
-void
-cris_pop_frame (void)
-{
- register struct frame_info *fi = get_current_frame ();
- register int regno;
- register int stack_offset = 0;
-
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- {
- /* This happens when we hit a breakpoint set at the entry point,
- when returning from a dummy frame. */
- generic_pop_dummy_frame ();
- }
- else
- {
- cris_frame_init_saved_regs (fi);
-
- /* For each register, the address of where it was saved on entry to
- the frame now lies in fi->saved_regs[regno], or zero if it was not
- saved. This includes special registers such as PC and FP saved in
- special ways in the stack frame. The SP_REGNUM is even more
- special, the address here is the SP for the next frame, not the
- address where the SP was saved. */
-
- /* Restore general registers R0 - R7. They were pushed on the stack
- after SP was saved. */
- for (regno = 0; regno < FP_REGNUM; regno++)
- {
- if (fi->saved_regs[regno])
- {
- write_register (regno,
- read_memory_integer (fi->saved_regs[regno], 4));
- }
- }
-
- if (fi->saved_regs[FP_REGNUM])
- {
- /* Pop the frame pointer (R8). It was pushed before SP
- was saved. */
- write_register (FP_REGNUM,
- read_memory_integer (fi->saved_regs[FP_REGNUM], 4));
- stack_offset += 4;
-
- /* Not a leaf function. */
- if (fi->saved_regs[SRP_REGNUM])
- {
- /* SRP was pushed before SP was saved. */
- stack_offset += 4;
- }
-
- /* Restore the SP and adjust for R8 and (possibly) SRP. */
- write_register (SP_REGNUM, fi->saved_regs[FP_REGNUM] + stack_offset);
- }
- else
- {
- /* Currently, we can't get the correct info into fi->saved_regs
- without a frame pointer. */
- }
-
- /* Restore the PC. */
- write_register (PC_REGNUM, fi->extra_info->return_pc);
- }
- flush_cached_frames ();
+static int
+cris_reg_struct_has_addr (int gcc_p, struct type *type)
+{
+ return (TYPE_LENGTH (type) > 8);
}
/* Calculates a value that measures how good inst_args constraints an
for (i = 0; cris_opcodes[i].name != NULL; i++)
{
if (((cris_opcodes[i].match & insn) == cris_opcodes[i].match)
- && ((cris_opcodes[i].lose & insn) == 0))
+ && ((cris_opcodes[i].lose & insn) == 0)
+ /* Only CRISv10 instructions, please. */
+ && (cris_opcodes[i].applicable_version != cris_ver_v32p))
{
level_of_match = constraint (insn, cris_opcodes[i].args, inst_env);
if (level_of_match >= 0)
digs through the opcodes in order to find all possible targets.
Either one ordinary target or two targets for branches may be found. */
-void
-cris_software_single_step (enum target_signal ignore, int insert_breakpoints)
+static int
+cris_software_single_step (struct regcache *regcache)
{
inst_env_type inst_env;
-
- if (insert_breakpoints)
+
+ /* Analyse the present instruction environment and insert
+ breakpoints. */
+ int status = find_step_target (&inst_env);
+ if (status == -1)
{
- /* Analyse the present instruction environment and insert
- breakpoints. */
- int status = find_step_target (&inst_env);
- if (status == -1)
- {
- /* Could not find a target. FIXME: Should do something. */
- }
- else
- {
- /* Insert at most two breakpoints. One for the next PC content
- and possibly another one for a branch, jump, etc. */
- next_pc = (CORE_ADDR) inst_env.reg[PC_REGNUM];
- target_insert_breakpoint (next_pc, break_mem[0]);
- if (inst_env.branch_found
- && (CORE_ADDR) inst_env.branch_break_address != next_pc)
- {
- branch_target_address =
- (CORE_ADDR) inst_env.branch_break_address;
- target_insert_breakpoint (branch_target_address, break_mem[1]);
- branch_break_inserted = 1;
- }
- }
+ /* Could not find a target. Things are likely to go downhill
+ from here. */
+ warning (_("CRIS software single step could not find a step target."));
}
else
{
- /* Remove breakpoints. */
- target_remove_breakpoint (next_pc, break_mem[0]);
- if (branch_break_inserted)
- {
- target_remove_breakpoint (branch_target_address, break_mem[1]);
- branch_break_inserted = 0;
- }
+ /* Insert at most two breakpoints. One for the next PC content
+ and possibly another one for a branch, jump, etc. */
+ CORE_ADDR next_pc = (CORE_ADDR) inst_env.reg[PC_REGNUM];
+ insert_single_step_breakpoint (next_pc);
+ if (inst_env.branch_found
+ && (CORE_ADDR) inst_env.branch_break_address != next_pc)
+ {
+ CORE_ADDR branch_target_address
+ = (CORE_ADDR) inst_env.branch_break_address;
+ insert_single_step_breakpoint (branch_target_address);
+ }
}
+
+ return 1;
}
/* Calculates the prefix value for quick offset addressing mode. */
-void
+static void
quick_mode_bdap_prefix (unsigned short inst, inst_env_type *inst_env)
{
/* It's invalid to be in a delay slot. You can't have a prefix to this
from the size of the operation. The PC is always kept aligned on even
word addresses. */
-void
+static void
process_autoincrement (int size, unsigned short inst, inst_env_type *inst_env)
{
if (size == INST_BYTE_SIZE)
/* Just a forward declaration. */
-unsigned long
-get_data_from_address (unsigned short *inst, CORE_ADDR address);
+static unsigned long get_data_from_address (unsigned short *inst,
+ CORE_ADDR address);
/* Calculates the prefix value for the general case of offset addressing
mode. */
-void
+static void
bdap_prefix (unsigned short inst, inst_env_type *inst_env)
{
/* Calculates the prefix value for the index addressing mode. */
-void
+static void
biap_prefix (unsigned short inst, inst_env_type *inst_env)
{
/* It's invalid to be in a delay slot. I can't see that it's possible to
/* Calculates the prefix value for the double indirect addressing mode. */
-void
+static void
dip_prefix (unsigned short inst, inst_env_type *inst_env)
{
/* Finds the destination for a branch with 8-bits offset. */
-void
+static void
eight_bit_offset_branch_op (unsigned short inst, inst_env_type *inst_env)
{
/* Finds the destination for a branch with 16-bits offset. */
-void
+static void
sixteen_bit_offset_branch_op (unsigned short inst, inst_env_type *inst_env)
{
short offset;
/* Handles the ABS instruction. */
-void
+static void
abs_op (unsigned short inst, inst_env_type *inst_env)
{
/* Handles the ADDI instruction. */
-void
+static void
addi_op (unsigned short inst, inst_env_type *inst_env)
{
/* It's invalid to have the PC as base register. And ADDI can't have
/* Handles the ASR instruction. */
-void
+static void
asr_op (unsigned short inst, inst_env_type *inst_env)
{
int shift_steps;
/* Handles the ASRQ instruction. */
-void
+static void
asrq_op (unsigned short inst, inst_env_type *inst_env)
{
/* Handles the AX, EI and SETF instruction. */
-void
+static void
ax_ei_setf_op (unsigned short inst, inst_env_type *inst_env)
{
if (inst_env->prefix_found)
register. Note that check_assign assumes that the caller has checked that
there is a prefix to this instruction. The mode check depends on this. */
-void
+static void
check_assign (unsigned short inst, inst_env_type *inst_env)
{
/* Check if it's an assign addressing mode. */
/* Handles the 2-operand BOUND instruction. */
-void
+static void
two_operand_bound_op (unsigned short inst, inst_env_type *inst_env)
{
/* It's invalid to have the PC as the index operand. */
/* Handles the 3-operand BOUND instruction. */
-void
+static void
three_operand_bound_op (unsigned short inst, inst_env_type *inst_env)
{
/* It's an error if we haven't got a prefix. And it's also an error
/* Clears the status flags in inst_env. */
-void
+static void
btst_nop_op (unsigned short inst, inst_env_type *inst_env)
{
/* It's an error if we have got a prefix. */
/* Clears the status flags in inst_env. */
-void
+static void
clearf_di_op (unsigned short inst, inst_env_type *inst_env)
{
/* It's an error if we have got a prefix. */
/* Handles the CLEAR instruction if it's in register mode. */
-void
+static void
reg_mode_clear_op (unsigned short inst, inst_env_type *inst_env)
{
/* Check if the target is the PC. */
/* Handles the TEST instruction if it's in register mode. */
-void
+static void
reg_mode_test_op (unsigned short inst, inst_env_type *inst_env)
{
/* It's an error if we have got a prefix. */
/* Handles the CLEAR and TEST instruction if the instruction isn't
in register mode. */
-void
+static void
none_reg_mode_clear_test_op (unsigned short inst, inst_env_type *inst_env)
{
/* Check if we are in a prefix mode. */
/* Checks that the PC isn't the destination register or the instructions has
a prefix. */
-void
+static void
dstep_logshift_mstep_neg_not_op (unsigned short inst, inst_env_type *inst_env)
{
/* It's invalid to have the PC as the destination. The instruction can't
/* Checks that the instruction doesn't have a prefix. */
-void
+static void
break_op (unsigned short inst, inst_env_type *inst_env)
{
/* The instruction can't have a prefix. */
/* Checks that the PC isn't the destination register and that the instruction
doesn't have a prefix. */
-void
+static void
scc_op (unsigned short inst, inst_env_type *inst_env)
{
/* It's invalid to have the PC as the destination. The instruction can't
/* Handles the register mode JUMP instruction. */
-void
+static void
reg_mode_jump_op (unsigned short inst, inst_env_type *inst_env)
{
/* It's invalid to do a JUMP in a delay slot. The mode is register, so
/* Handles the JUMP instruction for all modes except register. */
-void none_reg_mode_jump_op (unsigned short inst, inst_env_type *inst_env)
+static void
+none_reg_mode_jump_op (unsigned short inst, inst_env_type *inst_env)
{
unsigned long newpc;
CORE_ADDR address;
/* Handles moves to special registers (aka P-register) for all modes. */
-void
+static void
move_to_preg_op (unsigned short inst, inst_env_type *inst_env)
{
if (inst_env->prefix_found)
/* Handles moves from special registers (aka P-register) for all modes
except register. */
-void
+static void
none_reg_mode_move_from_preg_op (unsigned short inst, inst_env_type *inst_env)
{
if (inst_env->prefix_found)
/* Handles moves from special registers (aka P-register) when the mode
is register. */
-void
+static void
reg_mode_move_from_preg_op (unsigned short inst, inst_env_type *inst_env)
{
/* Register mode move from special register can't have a prefix. */
/* Handles the MOVEM from memory to general register instruction. */
-void
+static void
move_mem_to_reg_movem_op (unsigned short inst, inst_env_type *inst_env)
{
if (inst_env->prefix_found)
/* Handles the MOVEM to memory from general register instruction. */
-void
+static void
move_reg_to_mem_movem_op (unsigned short inst, inst_env_type *inst_env)
{
if (inst_env->prefix_found)
inst_env->disable_interrupt = 0;
}
-/* Handles the pop instruction to a general register.
- POP is a assembler macro for MOVE.D [SP+], Rd. */
-
-void
-reg_pop_op (unsigned short inst, inst_env_type *inst_env)
-{
- /* POP can't have a prefix. */
- if (inst_env->prefix_found)
- {
- inst_env->invalid = 1;
- return;
- }
- if (cris_get_operand2 (inst) == REG_PC)
- {
- /* It's invalid to change the PC in a delay slot. */
- if (inst_env->slot_needed)
- {
- inst_env->invalid = 1;
- return;
- }
- inst_env->reg[REG_PC] =
- read_memory_unsigned_integer (inst_env->reg[REG_SP], 4);
- }
- inst_env->slot_needed = 0;
- inst_env->prefix_found = 0;
- inst_env->xflag_found = 0;
- inst_env->disable_interrupt = 0;
-}
-
-/* Handles moves from register to memory. */
-
-void
-move_reg_to_mem_index_inc_op (unsigned short inst, inst_env_type *inst_env)
-{
- /* Check if we have a prefix. */
- if (inst_env->prefix_found)
- {
- /* The only thing that can change the PC is an assign. */
- check_assign (inst, inst_env);
- }
- else if ((cris_get_operand1 (inst) == REG_PC)
- && (cris_get_mode (inst) == AUTOINC_MODE))
- {
- /* It's invalid to change the PC in a delay slot. */
- if (inst_env->slot_needed)
- {
- inst_env->invalid = 1;
- return;
- }
- process_autoincrement (cris_get_size (inst), inst, inst_env);
- }
- inst_env->slot_needed = 0;
- inst_env->prefix_found = 0;
- inst_env->xflag_found = 0;
- inst_env->disable_interrupt = 0;
-}
-
/* Handles the intructions that's not yet implemented, by setting
inst_env->invalid to true. */
-void
+static void
not_implemented_op (unsigned short inst, inst_env_type *inst_env)
{
inst_env->invalid = 1;
/* Handles the XOR instruction. */
-void
+static void
xor_op (unsigned short inst, inst_env_type *inst_env)
{
/* XOR can't have a prefix. */
/* Handles the MULS instruction. */
-void
+static void
muls_op (unsigned short inst, inst_env_type *inst_env)
{
/* MULS/U can't have a prefix. */
/* Handles the MULU instruction. */
-void
+static void
mulu_op (unsigned short inst, inst_env_type *inst_env)
{
/* MULS/U can't have a prefix. */
/* Calculate the result of the instruction for ADD, SUB, CMP AND, OR and MOVE.
The MOVE instruction is the move from source to register. */
-void
+static void
add_sub_cmp_and_or_move_action (unsigned short inst, inst_env_type *inst_env,
unsigned long source1, unsigned long source2)
{
is zero extend then the value is extended with zero. If instead the mode
is signed extend the sign bit of the value is taken into consideration. */
-unsigned long
+static unsigned long
do_sign_or_zero_extend (unsigned long value, unsigned short *inst)
{
/* The size can be either byte or word, check which one it is.
/* Handles the register mode for the ADD, SUB, CMP, AND, OR and MOVE
instruction. The MOVE instruction is the move from source to register. */
-void
+static void
reg_mode_add_sub_cmp_and_or_move_op (unsigned short inst,
inst_env_type *inst_env)
{
the size of the operation. If the instruction is a zero or signed
extend instruction, the size field is changed in instruction. */
-unsigned long
+static unsigned long
get_data_from_address (unsigned short *inst, CORE_ADDR address)
{
int size = cris_get_size (*inst);
/* Handles the assign addresing mode for the ADD, SUB, CMP, AND, OR and MOVE
instructions. The MOVE instruction is the move from source to register. */
-void
+static void
handle_prefix_assign_mode_for_aritm_op (unsigned short inst,
inst_env_type *inst_env)
{
OR instructions. Note that for this to work as expected, the calling
function must have made sure that there is a prefix to this instruction. */
-void
+static void
three_operand_add_sub_cmp_and_or_op (unsigned short inst,
inst_env_type *inst_env)
{
/* Handles the index addresing mode for the ADD, SUB, CMP, AND, OR and MOVE
instructions. The MOVE instruction is the move from source to register. */
-void
+static void
handle_prefix_index_mode_for_aritm_op (unsigned short inst,
inst_env_type *inst_env)
{
CMP, AND OR and MOVE instruction. The MOVE instruction is the move from
source to register. */
-void
+static void
handle_inc_and_index_mode_for_aritm_op (unsigned short inst,
inst_env_type *inst_env)
{
/* Handles the two-operand addressing mode, all modes except register, for
the ADD, SUB CMP, AND and OR instruction. */
-void
+static void
none_reg_mode_add_sub_cmp_and_or_move_op (unsigned short inst,
inst_env_type *inst_env)
{
/* Handles the quick addressing mode for the ADD and SUB instruction. */
-void
+static void
quick_mode_add_sub_op (unsigned short inst, inst_env_type *inst_env)
{
unsigned long operand1;
/* Handles the quick addressing mode for the CMP, AND and OR instruction. */
-void
+static void
quick_mode_and_cmp_move_or_op (unsigned short inst, inst_env_type *inst_env)
{
unsigned long operand1;
/* Translate op_type to a function and call it. */
-static void cris_gdb_func (enum cris_op_type op_type, unsigned short inst,
- inst_env_type *inst_env)
+static void
+cris_gdb_func (enum cris_op_type op_type, unsigned short inst,
+ inst_env_type *inst_env)
{
switch (op_type)
{
exec_bfd has been set. */
static int
-cris_delayed_get_disassembler (bfd_vma addr, disassemble_info *info)
-{
- tm_print_insn = cris_get_disassembler (exec_bfd);
- return TARGET_PRINT_INSN (addr, info);
+cris_delayed_get_disassembler (bfd_vma addr, struct disassemble_info *info)
+{
+ int (*print_insn) (bfd_vma addr, struct disassemble_info *info);
+ /* FIXME: cagney/2003-08-27: It should be possible to select a CRIS
+ disassembler, even when there is no BFD. Does something like
+ "gdb; target remote; disassmeble *0x123" work? */
+ gdb_assert (exec_bfd != NULL);
+ print_insn = cris_get_disassembler (exec_bfd);
+ gdb_assert (print_insn != NULL);
+ return print_insn (addr, info);
}
/* Copied from <asm/elf.h>. */
typedef unsigned long elf_greg_t;
/* Same as user_regs_struct struct in <asm/user.h>. */
-typedef elf_greg_t elf_gregset_t[35];
+#define CRISV10_ELF_NGREG 35
+typedef elf_greg_t elf_gregset_t[CRISV10_ELF_NGREG];
+
+#define CRISV32_ELF_NGREG 32
+typedef elf_greg_t crisv32_elf_gregset_t[CRISV32_ELF_NGREG];
/* Unpack an elf_gregset_t into GDB's register cache. */
-void
-supply_gregset (elf_gregset_t *gregsetp)
+static void
+cris_supply_gregset (struct regcache *regcache, elf_gregset_t *gregsetp)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
int i;
elf_greg_t *regp = *gregsetp;
static char zerobuf[4] = {0};
knows about the actual size of each register so that's no problem. */
for (i = 0; i < NUM_GENREGS + NUM_SPECREGS; i++)
{
- supply_register (i, (char *)®p[i]);
+ regcache_raw_supply (regcache, i, (char *)®p[i]);
+ }
+
+ if (tdep->cris_version == 32)
+ {
+ /* Needed to set pseudo-register PC for CRISv32. */
+ /* FIXME: If ERP is in a delay slot at this point then the PC will
+ be wrong. Issue a warning to alert the user. */
+ regcache_raw_supply (regcache, PC_REGNUM,
+ (char *)®p[ERP_REGNUM]);
+
+ if (*(char *)®p[ERP_REGNUM] & 0x1)
+ fprintf_unfiltered (gdb_stderr, "Warning: PC in delay slot\n");
}
}
regsets, until multi-arch core support is ready. */
static void
-fetch_core_registers (char *core_reg_sect, unsigned core_reg_size,
+fetch_core_registers (struct regcache *regcache,
+ char *core_reg_sect, unsigned core_reg_size,
int which, CORE_ADDR reg_addr)
{
elf_gregset_t gregset;
switch (which)
{
case 0:
- if (core_reg_size != sizeof (gregset))
+ if (core_reg_size != sizeof (elf_gregset_t)
+ && core_reg_size != sizeof (crisv32_elf_gregset_t))
{
- warning ("wrong size gregset struct in core file");
+ warning (_("wrong size gregset struct in core file"));
}
else
{
memcpy (&gregset, core_reg_sect, sizeof (gregset));
- supply_gregset (&gregset);
+ cris_supply_gregset (regcache, &gregset);
}
default:
NULL /* next */
};
-/* Fetch (and possibly build) an appropriate link_map_offsets
- structure for native GNU/Linux CRIS targets using the struct
- offsets defined in link.h (but without actual reference to that
- file).
-
- This makes it possible to access GNU/Linux CRIS shared libraries
- from a GDB that was not built on an GNU/Linux CRIS host (for cross
- debugging).
-
- See gdb/solib-svr4.h for an explanation of these fields. */
-
-struct link_map_offsets *
-cris_linux_svr4_fetch_link_map_offsets (void)
-{
- static struct link_map_offsets lmo;
- static struct link_map_offsets *lmp = NULL;
-
- if (lmp == NULL)
- {
- lmp = &lmo;
-
- lmo.r_debug_size = 8; /* The actual size is 20 bytes, but
- this is all we need. */
- lmo.r_map_offset = 4;
- lmo.r_map_size = 4;
-
- lmo.link_map_size = 20;
-
- lmo.l_addr_offset = 0;
- lmo.l_addr_size = 4;
-
- lmo.l_name_offset = 4;
- lmo.l_name_size = 4;
-
- lmo.l_next_offset = 12;
- lmo.l_next_size = 4;
-
- lmo.l_prev_offset = 16;
- lmo.l_prev_size = 4;
- }
-
- return lmp;
-}
-
-static void
-cris_fpless_backtrace (char *noargs, int from_tty)
-{
- /* Points at the instruction after the jsr (except when in innermost frame
- where it points at the original pc). */
- CORE_ADDR pc = 0;
-
- /* Temporary variable, used for parsing from the start of the function that
- the pc is in, up to the pc. */
- CORE_ADDR tmp_pc = 0;
- CORE_ADDR sp = 0;
-
- /* Information about current frame. */
- struct symtab_and_line sal;
- char* func_name;
-
- /* Present instruction. */
- unsigned short insn;
-
- /* Next instruction, lookahead. */
- unsigned short insn_next;
-
- /* This is to store the offset between sp at start of function and until we
- reach push srp (if any). */
- int sp_add_later = 0;
- int push_srp_found = 0;
-
- int val = 0;
-
- /* Frame counter. */
- int frame = 0;
-
- /* For the innermost frame, we want to look at srp in case it's a leaf
- function (since there's no push srp in that case). */
- int innermost_frame = 1;
-
- read_register_gen (PC_REGNUM, (char *) &pc);
- read_register_gen (SP_REGNUM, (char *) &sp);
-
- /* We make an explicit return when we can't find an outer frame. */
- while (1)
- {
- /* Get file name and line number. */
- sal = find_pc_line (pc, 0);
-
- /* Get function name. */
- find_pc_partial_function (pc, &func_name, (CORE_ADDR *) NULL,
- (CORE_ADDR *) NULL);
-
- /* Print information about current frame. */
- printf_unfiltered ("#%i 0x%08lx in %s", frame++, pc, func_name);
- if (sal.symtab)
- {
- printf_unfiltered (" at %s:%i", sal.symtab->filename, sal.line);
- }
- printf_unfiltered ("\n");
-
- /* Get the start address of this function. */
- tmp_pc = get_pc_function_start (pc);
-
- /* Mini parser, only meant to find push sp and sub ...,sp from the start
- of the function, up to the pc. */
- while (tmp_pc < pc)
- {
- insn = read_memory_unsigned_integer (tmp_pc, sizeof (short));
- tmp_pc += sizeof (short);
- if (insn == 0xE1FC)
- {
- /* push <reg> 32 bit instruction */
- insn_next = read_memory_unsigned_integer (tmp_pc,
- sizeof (short));
- tmp_pc += sizeof (short);
-
- /* Recognize srp. */
- if (insn_next == 0xBE7E)
- {
- /* For subsequent (not this one though) push or sub which
- affects sp, adjust sp immediately. */
- push_srp_found = 1;
-
- /* Note: this will break if we ever encounter a
- push vr (1 byte) or push ccr (2 bytes). */
- sp_add_later += 4;
- }
- else
- {
- /* Some other register was pushed. */
- if (push_srp_found)
- {
- sp += 4;
- }
- else
- {
- sp_add_later += 4;
- }
- }
- }
- else if (cris_get_operand2 (insn) == SP_REGNUM
- && cris_get_mode (insn) == 0x0000
- && cris_get_opcode (insn) == 0x000A)
- {
- /* subq <val>,sp */
- val = cris_get_quick_value (insn);
-
- if (push_srp_found)
- {
- sp += val;
- }
- else
- {
- sp_add_later += val;
- }
-
- }
- else if (cris_get_operand2 (insn) == SP_REGNUM
- /* Autoincrement addressing mode. */
- && cris_get_mode (insn) == 0x0003
- /* Opcode. */
- && ((insn) & 0x03E0) >> 5 == 0x0004)
- {
- /* subu <val>,sp */
- val = get_data_from_address (&insn, tmp_pc);
-
- if (push_srp_found)
- {
- sp += val;
- }
- else
- {
- sp_add_later += val;
- }
- }
- else if (cris_get_operand2 (insn) == SP_REGNUM
- && ((insn & 0x0F00) >> 8) == 0x0001
- && (cris_get_signed_offset (insn) < 0))
- {
- /* Immediate byte offset addressing prefix word with sp as base
- register. Used for CRIS v8 i.e. ETRAX 100 and newer if <val>
- is between 64 and 128.
- movem r<regsave>,[sp=sp-<val>] */
- val = -cris_get_signed_offset (insn);
- insn_next = read_memory_unsigned_integer (tmp_pc,
- sizeof (short));
- tmp_pc += sizeof (short);
-
- if (cris_get_mode (insn_next) == PREFIX_ASSIGN_MODE
- && cris_get_opcode (insn_next) == 0x000F
- && cris_get_size (insn_next) == 0x0003
- && cris_get_operand1 (insn_next) == SP_REGNUM)
- {
- if (push_srp_found)
- {
- sp += val;
- }
- else
- {
- sp_add_later += val;
- }
- }
- }
- }
-
- if (push_srp_found)
- {
- /* Reset flag. */
- push_srp_found = 0;
-
- /* sp should now point at where srp is stored on the stack. Update
- the pc to the srp. */
- pc = read_memory_unsigned_integer (sp, 4);
- }
- else if (innermost_frame)
- {
- /* We couldn't find a push srp in the prologue, so this must be
- a leaf function, and thus we use the srp register directly.
- This should happen at most once, for the innermost function. */
- read_register_gen (SRP_REGNUM, (char *) &pc);
- }
- else
- {
- /* Couldn't find an outer frame. */
- return;
- }
-
- /* Reset flag. (In case the innermost frame wasn't a leaf, we don't
- want to look at the srp register later either). */
- innermost_frame = 0;
-
- /* Now, add the offset for everything up to, and including push srp,
- that was held back during the prologue parsing. */
- sp += sp_add_later;
- sp_add_later = 0;
- }
-}
+extern initialize_file_ftype _initialize_cris_tdep; /* -Wmissing-prototypes */
void
_initialize_cris_tdep (void)
{
+ static struct cmd_list_element *cris_set_cmdlist;
+ static struct cmd_list_element *cris_show_cmdlist;
+
struct cmd_list_element *c;
gdbarch_register (bfd_arch_cris, cris_gdbarch_init, cris_dump_tdep);
- /* Used in disassembly. */
- tm_print_insn = cris_delayed_get_disassembler;
-
/* CRIS-specific user-commands. */
- c = add_set_cmd ("cris-version", class_support, var_integer,
- (char *) &usr_cmd_cris_version,
- "Set the current CRIS version.", &setlist);
- set_cmd_sfunc (c, cris_version_update);
- add_show_from_set (c, &showlist);
-
- c = add_set_enum_cmd ("cris-mode", class_support, cris_mode_enums,
- &usr_cmd_cris_mode,
- "Set the current CRIS mode.", &setlist);
- set_cmd_sfunc (c, cris_mode_update);
- add_show_from_set (c, &showlist);
-
- c = add_set_enum_cmd ("cris-abi", class_support, cris_abi_enums,
- &usr_cmd_cris_abi,
- "Set the current CRIS ABI version.", &setlist);
- set_cmd_sfunc (c, cris_abi_update);
- add_show_from_set (c, &showlist);
-
- c = add_cmd ("cris-fpless-backtrace", class_support, cris_fpless_backtrace,
- "Display call chain using the subroutine return pointer.\n"
- "Note that this displays the address after the jump to the "
- "subroutine.", &cmdlist);
-
- add_core_fns (&cris_elf_core_fns);
+ add_setshow_uinteger_cmd ("cris-version", class_support,
+ &usr_cmd_cris_version,
+ _("Set the current CRIS version."),
+ _("Show the current CRIS version."),
+ _("\
+Set to 10 for CRISv10 or 32 for CRISv32 if autodetection fails.\n\
+Defaults to 10. "),
+ set_cris_version,
+ NULL, /* FIXME: i18n: Current CRIS version is %s. */
+ &setlist, &showlist);
+
+ add_setshow_enum_cmd ("cris-mode", class_support,
+ cris_modes, &usr_cmd_cris_mode,
+ _("Set the current CRIS mode."),
+ _("Show the current CRIS mode."),
+ _("\
+Set to CRIS_MODE_GURU when debugging in guru mode.\n\
+Makes GDB use the NRP register instead of the ERP register in certain cases."),
+ set_cris_mode,
+ NULL, /* FIXME: i18n: Current CRIS version is %s. */
+ &setlist, &showlist);
+ add_setshow_boolean_cmd ("cris-dwarf2-cfi", class_support,
+ &usr_cmd_cris_dwarf2_cfi,
+ _("Set the usage of Dwarf-2 CFI for CRIS."),
+ _("Show the usage of Dwarf-2 CFI for CRIS."),
+ _("Set this to \"off\" if using gcc-cris < R59."),
+ set_cris_dwarf2_cfi,
+ NULL, /* FIXME: i18n: Usage of Dwarf-2 CFI for CRIS is %d. */
+ &setlist, &showlist);
+
+ deprecated_add_core_fns (&cris_elf_core_fns);
}
/* Prints out all target specific values. */
tdep->cris_version);
fprintf_unfiltered (file, "cris_dump_tdep: tdep->cris_mode = %s\n",
tdep->cris_mode);
- fprintf_unfiltered (file, "cris_dump_tdep: tdep->cris_abi = %s\n",
- tdep->cris_abi);
-
+ fprintf_unfiltered (file, "cris_dump_tdep: tdep->cris_dwarf2_cfi = %i\n",
+ tdep->cris_dwarf2_cfi);
}
}
static void
-cris_version_update (char *ignore_args, int from_tty,
- struct cmd_list_element *c)
+set_cris_version (char *ignore_args, int from_tty,
+ struct cmd_list_element *c)
{
struct gdbarch_info info;
- /* NOTE: cagney/2002-03-17: The add_show_from_set() function clones
- the set command passed as a parameter. The clone operation will
- include (BUG?) any ``set'' command callback, if present.
- Commands like ``info set'' call all the ``show'' command
- callbacks. Unfortunatly, for ``show'' commands cloned from
- ``set'', this includes callbacks belonging to ``set'' commands.
- Making this worse, this only occures if add_show_from_set() is
- called after add_cmd_sfunc() (BUG?). */
-
- /* From here on, trust the user's CRIS version setting. */
- if (cmd_type (c) == set_cmd)
- {
- usr_cmd_cris_version_valid = 1;
+ usr_cmd_cris_version_valid = 1;
- /* Update the current architecture, if needed. */
- gdbarch_info_init (&info);
- if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "cris_gdbarch_update: failed to update architecture.");
- }
+ /* Update the current architecture, if needed. */
+ gdbarch_info_init (&info);
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__,
+ _("cris_gdbarch_update: failed to update architecture."));
}
static void
-cris_mode_update (char *ignore_args, int from_tty,
- struct cmd_list_element *c)
+set_cris_mode (char *ignore_args, int from_tty,
+ struct cmd_list_element *c)
{
struct gdbarch_info info;
-
- /* NOTE: cagney/2002-03-17: The add_show_from_set() function clones
- the set command passed as a parameter. The clone operation will
- include (BUG?) any ``set'' command callback, if present.
- Commands like ``info set'' call all the ``show'' command
- callbacks. Unfortunatly, for ``show'' commands cloned from
- ``set'', this includes callbacks belonging to ``set'' commands.
- Making this worse, this only occures if add_show_from_set() is
- called after add_cmd_sfunc() (BUG?). */
-
- /* From here on, trust the user's CRIS mode setting. */
- if (cmd_type (c) == set_cmd)
- {
- usr_cmd_cris_mode_valid = 1;
-
- /* Update the current architecture, if needed. */
- gdbarch_info_init (&info);
- if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "cris_gdbarch_update: failed to update architecture.");
- }
+
+ /* Update the current architecture, if needed. */
+ gdbarch_info_init (&info);
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__,
+ "cris_gdbarch_update: failed to update architecture.");
}
static void
-cris_abi_update (char *ignore_args, int from_tty,
- struct cmd_list_element *c)
+set_cris_dwarf2_cfi (char *ignore_args, int from_tty,
+ struct cmd_list_element *c)
{
struct gdbarch_info info;
-
- /* NOTE: cagney/2002-03-17: The add_show_from_set() function clones
- the set command passed as a parameter. The clone operation will
- include (BUG?) any ``set'' command callback, if present.
- Commands like ``info set'' call all the ``show'' command
- callbacks. Unfortunatly, for ``show'' commands cloned from
- ``set'', this includes callbacks belonging to ``set'' commands.
- Making this worse, this only occures if add_show_from_set() is
- called after add_cmd_sfunc() (BUG?). */
-
- /* From here on, trust the user's CRIS ABI setting. */
- if (cmd_type (c) == set_cmd)
- {
- usr_cmd_cris_abi_valid = 1;
-
- /* Update the current architecture, if needed. */
- gdbarch_info_init (&info);
- if (!gdbarch_update_p (info))
- internal_error (__FILE__, __LINE__, "cris_gdbarch_update: failed to update architecture.");
- }
-}
-/* Copied from pa64solib.c, with a couple of minor changes. */
-
-static CORE_ADDR
-bfd_lookup_symbol (bfd *abfd, const char *symname)
-{
- unsigned int storage_needed;
- asymbol *sym;
- asymbol **symbol_table;
- unsigned int number_of_symbols;
- unsigned int i;
- struct cleanup *back_to;
- CORE_ADDR symaddr = 0;
-
- storage_needed = bfd_get_symtab_upper_bound (abfd);
-
- if (storage_needed > 0)
- {
- symbol_table = (asymbol **) xmalloc (storage_needed);
- back_to = make_cleanup (free, (PTR) symbol_table);
- number_of_symbols = bfd_canonicalize_symtab (abfd, symbol_table);
-
- for (i = 0; i < number_of_symbols; i++)
- {
- sym = *symbol_table++;
- if (!strcmp (sym->name, symname))
- {
- /* Bfd symbols are section relative. */
- symaddr = sym->value + sym->section->vma;
- break;
- }
- }
- do_cleanups (back_to);
- }
- return (symaddr);
+ /* Update the current architecture, if needed. */
+ gdbarch_info_init (&info);
+ if (!gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__,
+ _("cris_gdbarch_update: failed to update architecture."));
}
static struct gdbarch *
struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
int cris_version;
- const char *cris_mode;
- const char *cris_abi;
- CORE_ADDR cris_abi_sym = 0;
- int register_bytes;
if (usr_cmd_cris_version_valid)
{
/* Trust the user's CRIS version setting. */
cris_version = usr_cmd_cris_version;
}
- else
- {
- /* Assume it's CRIS version 10. */
- cris_version = 10;
- }
-
- if (usr_cmd_cris_mode_valid)
- {
- /* Trust the user's CRIS mode setting. */
- cris_mode = usr_cmd_cris_mode;
- }
- else if (cris_version == 10)
- {
- /* Assume CRIS version 10 is in user mode. */
- cris_mode = CRIS_MODE_USER;
- }
- else
- {
- /* Strictly speaking, older CRIS version don't have a supervisor mode,
- but we regard its only mode as supervisor mode. */
- cris_mode = CRIS_MODE_SUPERVISOR;
- }
-
- if (usr_cmd_cris_abi_valid)
- {
- /* Trust the user's ABI setting. */
- cris_abi = usr_cmd_cris_abi;
- }
- else if (info.abfd)
- {
- if (bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
- {
- /* An elf target uses the new ABI. */
- cris_abi = CRIS_ABI_V2;
- }
- else if (bfd_get_flavour (info.abfd) == bfd_target_aout_flavour)
- {
- /* An a.out target may use either ABI. Look for hints in the
- symbol table. */
- cris_abi_sym = bfd_lookup_symbol (info.abfd, CRIS_ABI_SYMBOL);
- cris_abi = cris_abi_sym ? CRIS_ABI_V2 : CRIS_ABI_ORIGINAL;
- }
- else
- {
- /* Unknown bfd flavour. Assume it's the new ABI. */
- cris_abi = CRIS_ABI_V2;
- }
- }
- else if (arches != NULL)
+ else if (info.abfd && bfd_get_mach (info.abfd) == bfd_mach_cris_v32)
{
- /* No bfd available. Stick with the ABI from the most recently
- selected architecture of this same family (the head of arches
- always points to this). (This is to avoid changing the ABI
- when the user updates the architecture with the 'set
- cris-version' command.) */
- cris_abi = gdbarch_tdep (arches->gdbarch)->cris_abi;
+ cris_version = 32;
}
else
{
- /* No bfd, and no previously selected architecture available.
- Assume it's the new ABI. */
- cris_abi = CRIS_ABI_V2;
+ /* Assume it's CRIS version 10. */
+ cris_version = 10;
}
/* Make the current settings visible to the user. */
usr_cmd_cris_version = cris_version;
- usr_cmd_cris_mode = cris_mode;
- usr_cmd_cris_abi = cris_abi;
- /* Find a candidate among the list of pre-declared architectures. Both
- CRIS version and ABI must match. */
+ /* Find a candidate among the list of pre-declared architectures. */
for (arches = gdbarch_list_lookup_by_info (arches, &info);
arches != NULL;
arches = gdbarch_list_lookup_by_info (arches->next, &info))
{
- if ((gdbarch_tdep (arches->gdbarch)->cris_version == cris_version)
- && (gdbarch_tdep (arches->gdbarch)->cris_mode == cris_mode)
- && (gdbarch_tdep (arches->gdbarch)->cris_abi == cris_abi))
+ if ((gdbarch_tdep (arches->gdbarch)->cris_version
+ == usr_cmd_cris_version)
+ && (gdbarch_tdep (arches->gdbarch)->cris_mode
+ == usr_cmd_cris_mode)
+ && (gdbarch_tdep (arches->gdbarch)->cris_dwarf2_cfi
+ == usr_cmd_cris_dwarf2_cfi))
return arches->gdbarch;
}
tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
gdbarch = gdbarch_alloc (&info, tdep);
- tdep->cris_version = cris_version;
- tdep->cris_mode = cris_mode;
- tdep->cris_abi = cris_abi;
+ tdep->cris_version = usr_cmd_cris_version;
+ tdep->cris_mode = usr_cmd_cris_mode;
+ tdep->cris_dwarf2_cfi = usr_cmd_cris_dwarf2_cfi;
/* INIT shall ensure that the INFO.BYTE_ORDER is non-zero. */
switch (info.byte_order)
break;
case BFD_ENDIAN_BIG:
- internal_error (__FILE__, __LINE__, "cris_gdbarch_init: big endian byte order in info");
+ internal_error (__FILE__, __LINE__, _("cris_gdbarch_init: big endian byte order in info"));
break;
default:
- internal_error (__FILE__, __LINE__, "cris_gdbarch_init: unknown byte order in info");
+ internal_error (__FILE__, __LINE__, _("cris_gdbarch_init: unknown byte order in info"));
}
- /* Initialize the ABI dependent things. */
- if (tdep->cris_abi == CRIS_ABI_ORIGINAL)
- {
- set_gdbarch_double_bit (gdbarch, 32);
- set_gdbarch_push_arguments (gdbarch, cris_abi_original_push_arguments);
- set_gdbarch_store_return_value (gdbarch,
- cris_abi_original_store_return_value);
- set_gdbarch_deprecated_extract_return_value
- (gdbarch, cris_abi_original_extract_return_value);
- set_gdbarch_reg_struct_has_addr
- (gdbarch, cris_abi_original_reg_struct_has_addr);
- }
- else if (tdep->cris_abi == CRIS_ABI_V2)
- {
- set_gdbarch_double_bit (gdbarch, 64);
- set_gdbarch_push_arguments (gdbarch, cris_abi_v2_push_arguments);
- set_gdbarch_store_return_value (gdbarch, cris_abi_v2_store_return_value);
- set_gdbarch_deprecated_extract_return_value
- (gdbarch, cris_abi_v2_extract_return_value);
- set_gdbarch_reg_struct_has_addr (gdbarch,
- cris_abi_v2_reg_struct_has_addr);
- }
- else
- internal_error (__FILE__, __LINE__, "cris_gdbarch_init: unknown CRIS ABI");
+ set_gdbarch_return_value (gdbarch, cris_return_value);
+ set_gdbarch_deprecated_reg_struct_has_addr (gdbarch,
+ cris_reg_struct_has_addr);
+ set_gdbarch_deprecated_use_struct_convention (gdbarch, always_use_struct_convention);
- /* The default definition of a long double is 2 * TARGET_DOUBLE_BIT,
- which means we have to set this explicitly. */
- set_gdbarch_long_double_bit (gdbarch, 64);
-
- /* There are 32 registers (some of which may not be implemented). */
- set_gdbarch_num_regs (gdbarch, 32);
set_gdbarch_sp_regnum (gdbarch, 14);
- set_gdbarch_fp_regnum (gdbarch, 8);
- set_gdbarch_pc_regnum (gdbarch, 15);
-
- set_gdbarch_register_name (gdbarch, cris_register_name);
-
- /* Length of ordinary registers used in push_word and a few other places.
- REGISTER_RAW_SIZE is the real way to know how big a register is. */
- set_gdbarch_register_size (gdbarch, 4);
-
- /* NEW */
- set_gdbarch_register_bytes_ok (gdbarch, cris_register_bytes_ok);
- set_gdbarch_software_single_step (gdbarch, cris_software_single_step);
-
- set_gdbarch_cannot_store_register (gdbarch, cris_cannot_store_register);
- set_gdbarch_cannot_fetch_register (gdbarch, cris_cannot_fetch_register);
+ /* Length of ordinary registers used in push_word and a few other
+ places. register_size() is the real way to know how big a
+ register is. */
+ set_gdbarch_double_bit (gdbarch, 64);
+ /* The default definition of a long double is 2 * TARGET_DOUBLE_BIT,
+ which means we have to set this explicitly. */
+ set_gdbarch_long_double_bit (gdbarch, 64);
/* The total amount of space needed to store (in an array called registers)
GDB's copy of the machine's register state. Note: We can not use
case 1:
case 2:
case 3:
- /* Support for these may be added later. */
- internal_error (__FILE__, __LINE__, "cris_gdbarch_init: unsupported CRIS version");
- break;
-
case 8:
case 9:
- /* CRIS v8 and v9, a.k.a. ETRAX 100. General registers R0 - R15
- (32 bits), special registers P0 - P1 (8 bits), P4 - P5 (16 bits),
- and P8 - P14 (32 bits). */
- register_bytes = (16 * 4) + (2 * 1) + (2 * 2) + (7 * 4);
+ /* Old versions; not supported. */
+ internal_error (__FILE__, __LINE__,
+ _("cris_gdbarch_init: unsupported CRIS version"));
break;
case 10:
case 11:
/* CRIS v10 and v11, a.k.a. ETRAX 100LX. In addition to ETRAX 100,
P7 (32 bits), and P15 (32 bits) have been implemented. */
- register_bytes = (16 * 4) + (2 * 1) + (2 * 2) + (9 * 4);
+ set_gdbarch_pc_regnum (gdbarch, 15);
+ set_gdbarch_register_type (gdbarch, cris_register_type);
+ /* There are 32 registers (some of which may not be implemented). */
+ set_gdbarch_num_regs (gdbarch, 32);
+ set_gdbarch_register_name (gdbarch, cris_register_name);
+ set_gdbarch_cannot_store_register (gdbarch, cris_cannot_store_register);
+ set_gdbarch_cannot_fetch_register (gdbarch, cris_cannot_fetch_register);
+
+ set_gdbarch_software_single_step (gdbarch, cris_software_single_step);
break;
- default:
- internal_error (__FILE__, __LINE__, "cris_gdbarch_init: unknown CRIS version");
- }
-
- set_gdbarch_register_bytes (gdbarch, register_bytes);
+ case 32:
+ /* CRIS v32. General registers R0 - R15 (32 bits), special registers
+ P0 - P15 (32 bits) except P0, P1, P3 (8 bits) and P4 (16 bits)
+ and pseudo-register PC (32 bits). */
+ set_gdbarch_pc_regnum (gdbarch, 32);
+ set_gdbarch_register_type (gdbarch, crisv32_register_type);
+ /* 32 registers + pseudo-register PC + 16 support registers. */
+ set_gdbarch_num_regs (gdbarch, 32 + 1 + 16);
+ set_gdbarch_register_name (gdbarch, crisv32_register_name);
- /* Returns the register offset for the first byte of register regno's space
- in the saved register state. */
- set_gdbarch_register_byte (gdbarch, cris_register_offset);
-
- /* The length of the registers in the actual machine representation. */
- set_gdbarch_register_raw_size (gdbarch, cris_register_size);
-
- /* The largest value REGISTER_RAW_SIZE can have. */
- set_gdbarch_max_register_raw_size (gdbarch, 32);
-
- /* The length of the registers in the program's representation. */
- set_gdbarch_register_virtual_size (gdbarch, cris_register_size);
-
- /* The largest value REGISTER_VIRTUAL_SIZE can have. */
- set_gdbarch_max_register_virtual_size (gdbarch, 32);
+ set_gdbarch_cannot_store_register
+ (gdbarch, crisv32_cannot_store_register);
+ set_gdbarch_cannot_fetch_register
+ (gdbarch, crisv32_cannot_fetch_register);
- set_gdbarch_register_virtual_type (gdbarch, cris_register_virtual_type);
-
- /* Use generic dummy frames. */
- set_gdbarch_use_generic_dummy_frames (gdbarch, 1);
-
- /* Where to execute the call in the memory segments. */
- set_gdbarch_call_dummy_location (gdbarch, AT_ENTRY_POINT);
- set_gdbarch_call_dummy_address (gdbarch, entry_point_address);
-
- /* Start execution at the beginning of dummy. */
- set_gdbarch_call_dummy_start_offset (gdbarch, 0);
- set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0);
-
- /* Set to 1 since call_dummy_breakpoint_offset was defined. */
- set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1);
-
- /* Read all about dummy frames in blockframe.c. */
- set_gdbarch_call_dummy_length (gdbarch, 0);
- set_gdbarch_pc_in_call_dummy (gdbarch, pc_in_call_dummy_at_entry_point);
-
- /* Defined to 1 to indicate that the target supports inferior function
- calls. */
- set_gdbarch_call_dummy_p (gdbarch, 1);
- set_gdbarch_call_dummy_words (gdbarch, 0);
- set_gdbarch_sizeof_call_dummy_words (gdbarch, 0);
-
- /* No stack adjustment needed when peforming an inferior function call. */
- set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0);
- set_gdbarch_fix_call_dummy (gdbarch, generic_fix_call_dummy);
+ set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 1);
- set_gdbarch_get_saved_register (gdbarch, generic_get_saved_register);
-
- /* No register requires conversion from raw format to virtual format. */
- set_gdbarch_register_convertible (gdbarch, generic_register_convertible_not);
+ set_gdbarch_single_step_through_delay
+ (gdbarch, crisv32_single_step_through_delay);
- set_gdbarch_push_dummy_frame (gdbarch, generic_push_dummy_frame);
- set_gdbarch_push_return_address (gdbarch, cris_push_return_address);
- set_gdbarch_pop_frame (gdbarch, cris_pop_frame);
+ break;
- set_gdbarch_store_struct_return (gdbarch, cris_store_struct_return);
- set_gdbarch_deprecated_extract_struct_value_address
- (gdbarch, cris_extract_struct_value_address);
- set_gdbarch_use_struct_convention (gdbarch, cris_use_struct_convention);
+ default:
+ internal_error (__FILE__, __LINE__,
+ _("cris_gdbarch_init: unknown CRIS version"));
+ }
- set_gdbarch_frame_init_saved_regs (gdbarch, cris_frame_init_saved_regs);
- set_gdbarch_init_extra_frame_info (gdbarch, cris_init_extra_frame_info);
+ /* Dummy frame functions (shared between CRISv10 and CRISv32 since they
+ have the same ABI). */
+ set_gdbarch_push_dummy_code (gdbarch, cris_push_dummy_code);
+ set_gdbarch_push_dummy_call (gdbarch, cris_push_dummy_call);
+ set_gdbarch_frame_align (gdbarch, cris_frame_align);
set_gdbarch_skip_prologue (gdbarch, cris_skip_prologue);
- set_gdbarch_prologue_frameless_p (gdbarch, generic_prologue_frameless_p);
/* The stack grows downward. */
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
set_gdbarch_breakpoint_from_pc (gdbarch, cris_breakpoint_from_pc);
- /* The PC must not be decremented after a breakpoint. (The breakpoint
- handler takes care of that.) */
- set_gdbarch_decr_pc_after_break (gdbarch, 0);
-
- /* Offset from address of function to start of its code. */
- set_gdbarch_function_start_offset (gdbarch, 0);
-
- /* The number of bytes at the start of arglist that are not really args,
- 0 in the CRIS ABI. */
- set_gdbarch_frame_args_skip (gdbarch, 0);
- set_gdbarch_frameless_function_invocation
- (gdbarch, cris_frameless_function_invocation);
- set_gdbarch_frame_chain (gdbarch, cris_frame_chain);
- set_gdbarch_frame_chain_valid (gdbarch, generic_file_frame_chain_valid);
-
- set_gdbarch_frame_saved_pc (gdbarch, cris_frame_saved_pc);
- set_gdbarch_frame_args_address (gdbarch, cris_frame_args_address);
- set_gdbarch_frame_locals_address (gdbarch, cris_frame_locals_address);
- set_gdbarch_saved_pc_after_call (gdbarch, cris_saved_pc_after_call);
-
- set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
-
- /* No extra stack alignment needed. Set to 1 by default. */
- set_gdbarch_extra_stack_alignment_needed (gdbarch, 0);
-
- /* Helpful for backtracing and returning in a call dummy. */
- set_gdbarch_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos);
+ set_gdbarch_unwind_pc (gdbarch, cris_unwind_pc);
+ set_gdbarch_unwind_sp (gdbarch, cris_unwind_sp);
+ set_gdbarch_unwind_dummy_id (gdbarch, cris_unwind_dummy_id);
- /* Use target_specific function to define link map offsets. */
- set_solib_svr4_fetch_link_map_offsets
- (gdbarch, cris_linux_svr4_fetch_link_map_offsets);
+ if (tdep->cris_dwarf2_cfi == 1)
+ {
+ /* Hook in the Dwarf-2 frame sniffer. */
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, cris_dwarf2_reg_to_regnum);
+ dwarf2_frame_set_init_reg (gdbarch, cris_dwarf2_frame_init_reg);
+ frame_unwind_append_sniffer (gdbarch, dwarf2_frame_sniffer);
+ }
+
+ if (tdep->cris_mode != cris_mode_guru)
+ {
+ frame_unwind_append_sniffer (gdbarch, cris_sigtramp_frame_sniffer);
+ }
+
+ frame_unwind_append_sniffer (gdbarch, cris_frame_sniffer);
+ frame_base_set_default (gdbarch, &cris_frame_base);
+
+ set_solib_svr4_fetch_link_map_offsets
+ (gdbarch, svr4_ilp32_fetch_link_map_offsets);
+ /* FIXME: cagney/2003-08-27: It should be possible to select a CRIS
+ disassembler, even when there is no BFD. Does something like
+ "gdb; target remote; disassmeble *0x123" work? */
+ set_gdbarch_print_insn (gdbarch, cris_delayed_get_disassembler);
+
return gdbarch;
}