/* Target dependent code for CRIS, for GDB, the GNU debugger.
- Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
- Free Software Foundation, Inc.
+ Copyright (C) 2001-2016 Free Software Foundation, Inc.
Contributed by Axis Communications AB.
Written by Hendrik Ruijter, Stefan Andersson, and Orjan Friberg.
#include "target.h"
#include "value.h"
#include "opcode/cris.h"
+#include "osabi.h"
#include "arch-utils.h"
#include "regcache.h"
-#include "gdb_assert.h"
-/* To get entry_point_address. */
#include "objfiles.h"
#include "solib.h" /* Support for shared libraries. */
#include "solib-svr4.h"
-#include "gdb_string.h"
#include "dis-asm.h"
+#include "cris-tdep.h"
+
enum cris_num_regs
{
/* There are no floating point registers. Used in gdbserver low-linux.c. */
ARG1_REGNUM Contains the first parameter to a function.
ARG2_REGNUM Contains the second parameter to a function.
ARG3_REGNUM Contains the third parameter to a function.
- ARG4_REGNUM Contains the fourth parameter to a function. Rest on stack.
+ ARG4_REGNUM Contains the fourth parameter to a function. Rest on stack.
gdbarch_sp_regnum Contains address of top of stack.
gdbarch_pc_regnum Contains address of next instruction.
SRP_REGNUM Subroutine return pointer register.
MOF_REGNUM = 23,
SRP_REGNUM = 27,
- /* CRISv10 et. al. specific registers. */
+ /* CRISv10 et al. specific registers. */
P0_REGNUM = 16,
P4_REGNUM = 20,
CCR_REGNUM = 21,
/* CRIS version, set via the user command 'set cris-version'. Affects
register names and sizes. */
-static int usr_cmd_cris_version;
+static unsigned int usr_cmd_cris_version;
/* Indicates whether to trust the above variable. */
static int usr_cmd_cris_version_valid = 0;
static const char cris_mode_normal[] = "normal";
static const char cris_mode_guru[] = "guru";
-static const char *cris_modes[] = {
+static const char *const cris_modes[] = {
cris_mode_normal,
cris_mode_guru,
0
/* Whether to make use of Dwarf-2 CFI (default on). */
static int usr_cmd_cris_dwarf2_cfi = 1;
-/* CRIS architecture specific information. */
-struct gdbarch_tdep
-{
- int cris_version;
- const char *cris_mode;
- int cris_dwarf2_cfi;
-};
-
-/* Functions for accessing target dependent data. */
-
-static int
-cris_version (void)
-{
- return (gdbarch_tdep (current_gdbarch)->cris_version);
-}
-
-static const char *
-cris_mode (void)
-{
- return (gdbarch_tdep (current_gdbarch)->cris_mode);
-}
-
/* Sigtramp identification code copied from i386-linux-tdep.c. */
#define SIGTRAMP_INSN0 0x9c5f /* movu.w 0xXX, $r9 */
the routine. Otherwise, return 0. */
static CORE_ADDR
-cris_sigtramp_start (struct frame_info *next_frame)
+cris_sigtramp_start (struct frame_info *this_frame)
{
- CORE_ADDR pc = frame_pc_unwind (next_frame);
+ CORE_ADDR pc = get_frame_pc (this_frame);
gdb_byte buf[SIGTRAMP_LEN];
- if (!safe_frame_unwind_memory (next_frame, pc, buf, SIGTRAMP_LEN))
+ if (!safe_frame_unwind_memory (this_frame, pc, buf, SIGTRAMP_LEN))
return 0;
if (((buf[1] << 8) + buf[0]) != SIGTRAMP_INSN0)
return 0;
pc -= SIGTRAMP_OFFSET1;
- if (!safe_frame_unwind_memory (next_frame, pc, buf, SIGTRAMP_LEN))
+ if (!safe_frame_unwind_memory (this_frame, pc, buf, SIGTRAMP_LEN))
return 0;
}
the routine. Otherwise, return 0. */
static CORE_ADDR
-cris_rt_sigtramp_start (struct frame_info *next_frame)
+cris_rt_sigtramp_start (struct frame_info *this_frame)
{
- CORE_ADDR pc = frame_pc_unwind (next_frame);
+ CORE_ADDR pc = get_frame_pc (this_frame);
gdb_byte buf[SIGTRAMP_LEN];
- if (!safe_frame_unwind_memory (next_frame, pc, buf, SIGTRAMP_LEN))
+ if (!safe_frame_unwind_memory (this_frame, pc, buf, SIGTRAMP_LEN))
return 0;
if (((buf[1] << 8) + buf[0]) != SIGTRAMP_INSN0)
return 0;
pc -= SIGTRAMP_OFFSET1;
- if (!safe_frame_unwind_memory (next_frame, pc, buf, SIGTRAMP_LEN))
+ if (!safe_frame_unwind_memory (this_frame, pc, buf, SIGTRAMP_LEN))
return 0;
}
return pc;
}
-/* Assuming NEXT_FRAME is a frame following a GNU/Linux sigtramp
- routine, return the address of the associated sigcontext structure. */
+/* Assuming THIS_FRAME is a frame for a GNU/Linux sigtramp routine,
+ return the address of the associated sigcontext structure. */
static CORE_ADDR
-cris_sigcontext_addr (struct frame_info *next_frame)
+cris_sigcontext_addr (struct frame_info *this_frame)
{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
CORE_ADDR pc;
CORE_ADDR sp;
- char buf[4];
+ gdb_byte buf[4];
- frame_unwind_register (next_frame,
- gdbarch_sp_regnum (get_frame_arch (next_frame)), buf);
- sp = extract_unsigned_integer (buf, 4);
+ get_frame_register (this_frame, gdbarch_sp_regnum (gdbarch), buf);
+ sp = extract_unsigned_integer (buf, 4, byte_order);
/* Look for normal sigtramp frame first. */
- pc = cris_sigtramp_start (next_frame);
+ pc = cris_sigtramp_start (this_frame);
if (pc)
{
/* struct signal_frame (arch/cris/kernel/signal.c) contains
return sp;
}
- pc = cris_rt_sigtramp_start (next_frame);
+ pc = cris_rt_sigtramp_start (this_frame);
if (pc)
{
/* struct rt_signal_frame (arch/cris/kernel/signal.c) contains
};
static struct cris_unwind_cache *
-cris_sigtramp_frame_unwind_cache (struct frame_info *next_frame,
+cris_sigtramp_frame_unwind_cache (struct frame_info *this_frame,
void **this_cache)
{
- struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
struct cris_unwind_cache *info;
- CORE_ADDR pc;
- CORE_ADDR sp;
CORE_ADDR addr;
- char buf[4];
+ gdb_byte buf[4];
int i;
if ((*this_cache))
- return (*this_cache);
+ return (struct cris_unwind_cache *) (*this_cache);
info = FRAME_OBSTACK_ZALLOC (struct cris_unwind_cache);
(*this_cache) = info;
- info->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+ info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
/* Zero all fields. */
info->prev_sp = 0;
info->return_pc = 0;
info->leaf_function = 0;
- frame_unwind_register (next_frame, gdbarch_sp_regnum (gdbarch), buf);
- info->base = extract_unsigned_integer (buf, 4);
+ get_frame_register (this_frame, gdbarch_sp_regnum (gdbarch), buf);
+ info->base = extract_unsigned_integer (buf, 4, byte_order);
- addr = cris_sigcontext_addr (next_frame);
+ addr = cris_sigcontext_addr (this_frame);
/* Layout of the sigcontext struct:
struct sigcontext {
/* FIXME: If ERP is in a delay slot at this point then the PC will
be wrong at this point. This problem manifests itself in the
sigaltstack.exp test case, which occasionally generates FAILs when
- the signal is received while in a delay slot.
+ the signal is received while in a delay slot.
This could be solved by a couple of read_memory_unsigned_integer and a
trad_frame_set_value. */
}
static void
-cris_sigtramp_frame_this_id (struct frame_info *next_frame, void **this_cache,
+cris_sigtramp_frame_this_id (struct frame_info *this_frame, void **this_cache,
struct frame_id *this_id)
{
struct cris_unwind_cache *cache =
- cris_sigtramp_frame_unwind_cache (next_frame, this_cache);
- (*this_id) = frame_id_build (cache->base, frame_pc_unwind (next_frame));
+ cris_sigtramp_frame_unwind_cache (this_frame, this_cache);
+ (*this_id) = frame_id_build (cache->base, get_frame_pc (this_frame));
}
/* Forward declaration. */
-static void cris_frame_prev_register (struct frame_info *next_frame,
- void **this_prologue_cache,
- int regnum, int *optimizedp,
- enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, gdb_byte *bufferp);
-static void
-cris_sigtramp_frame_prev_register (struct frame_info *next_frame,
- void **this_cache,
- int regnum, int *optimizedp,
- enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, gdb_byte *valuep)
+static struct value *cris_frame_prev_register (struct frame_info *this_frame,
+ void **this_cache, int regnum);
+static struct value *
+cris_sigtramp_frame_prev_register (struct frame_info *this_frame,
+ void **this_cache, int regnum)
{
/* Make sure we've initialized the cache. */
- cris_sigtramp_frame_unwind_cache (next_frame, this_cache);
- cris_frame_prev_register (next_frame, this_cache, regnum,
- optimizedp, lvalp, addrp, realnump, valuep);
+ cris_sigtramp_frame_unwind_cache (this_frame, this_cache);
+ return cris_frame_prev_register (this_frame, this_cache, regnum);
+}
+
+static int
+cris_sigtramp_frame_sniffer (const struct frame_unwind *self,
+ struct frame_info *this_frame,
+ void **this_cache)
+{
+ if (cris_sigtramp_start (this_frame)
+ || cris_rt_sigtramp_start (this_frame))
+ return 1;
+
+ return 0;
}
static const struct frame_unwind cris_sigtramp_frame_unwind =
{
SIGTRAMP_FRAME,
+ default_frame_unwind_stop_reason,
cris_sigtramp_frame_this_id,
- cris_sigtramp_frame_prev_register
+ cris_sigtramp_frame_prev_register,
+ NULL,
+ cris_sigtramp_frame_sniffer
};
-static const struct frame_unwind *
-cris_sigtramp_frame_sniffer (struct frame_info *next_frame)
-{
- if (cris_sigtramp_start (next_frame)
- || cris_rt_sigtramp_start (next_frame))
- return &cris_sigtramp_frame_unwind;
-
- return NULL;
-}
-
-int
+static int
crisv32_single_step_through_delay (struct gdbarch *gdbarch,
struct frame_info *this_frame)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
ULONGEST erp;
int ret = 0;
- char buf[4];
- if (cris_mode () == cris_mode_guru)
- {
- frame_unwind_register (this_frame, NRP_REGNUM, buf);
- }
+ if (tdep->cris_mode == cris_mode_guru)
+ erp = get_frame_register_unsigned (this_frame, NRP_REGNUM);
else
- {
- frame_unwind_register (this_frame, ERP_REGNUM, buf);
- }
-
- erp = extract_unsigned_integer (buf, 4);
+ erp = get_frame_register_unsigned (this_frame, ERP_REGNUM);
if (erp & 0x1)
{
/* In delay slot - check if there's a breakpoint at the preceding
instruction. */
- if (breakpoint_here_p (erp & ~0x1))
+ if (breakpoint_here_p (get_frame_address_space (this_frame), erp & ~0x1))
ret = 1;
}
return ret;
}
-/* Hardware watchpoint support. */
-
-/* We support 6 hardware data watchpoints, but cannot trigger on execute
- (any combination of read/write is fine). */
-
-int
-cris_can_use_hardware_watchpoint (int type, int count, int other)
-{
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
-
- /* No bookkeeping is done here; it is handled by the remote debug agent. */
-
- if (tdep->cris_version != 32)
- return 0;
- else
- /* CRISv32: Six data watchpoints, one for instructions. */
- return (((type == bp_read_watchpoint || type == bp_access_watchpoint
- || type == bp_hardware_watchpoint) && count <= 6)
- || (type == bp_hardware_breakpoint && count <= 1));
-}
-
-/* The CRISv32 hardware data watchpoints work by specifying ranges,
- which have no alignment or length restrictions. */
-
-int
-cris_region_ok_for_watchpoint (CORE_ADDR addr, int len)
-{
- return 1;
-}
-
-/* If the inferior has some watchpoint that triggered, return the
- address associated with that watchpoint. Otherwise, return
- zero. */
-
-CORE_ADDR
-cris_stopped_data_address (void)
-{
- CORE_ADDR eda;
- eda = get_frame_register_unsigned (get_current_frame (), EDA_REGNUM);
- return eda;
-}
-
/* The instruction environment needed to find single-step breakpoints. */
typedef
int delay_slot_pc_active;
int xflag_found;
int disable_interrupt;
+ enum bfd_endian byte_order;
} inst_env_type;
/* Machine-dependencies in CRIS for opcodes. */
struct cmd_list_element *c);
static CORE_ADDR cris_scan_prologue (CORE_ADDR pc,
- struct frame_info *next_frame,
+ struct frame_info *this_frame,
struct cris_unwind_cache *info);
static CORE_ADDR crisv32_scan_prologue (CORE_ADDR pc,
- struct frame_info *next_frame,
+ struct frame_info *this_frame,
struct cris_unwind_cache *info);
static CORE_ADDR cris_unwind_pc (struct gdbarch *gdbarch,
struct frame_info *next_frame);
/* When arguments must be pushed onto the stack, they go on in reverse
- order. The below implements a FILO (stack) to do this.
+ order. The below implements a FILO (stack) to do this.
Copied from d10v-tdep.c. */
struct stack_item
{
int len;
struct stack_item *prev;
- void *data;
+ gdb_byte *data;
};
static struct stack_item *
-push_stack_item (struct stack_item *prev, void *contents, int len)
+push_stack_item (struct stack_item *prev, const gdb_byte *contents, int len)
{
- struct stack_item *si;
- si = xmalloc (sizeof (struct stack_item));
- si->data = xmalloc (len);
+ struct stack_item *si = XNEW (struct stack_item);
+ si->data = (gdb_byte *) xmalloc (len);
si->len = len;
si->prev = prev;
memcpy (si->data, contents, len);
in the stack frame. sp is even more special: the address we return
for it IS the sp for the next frame. */
-struct cris_unwind_cache *
-cris_frame_unwind_cache (struct frame_info *next_frame,
+static struct cris_unwind_cache *
+cris_frame_unwind_cache (struct frame_info *this_frame,
void **this_prologue_cache)
{
- CORE_ADDR pc;
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
struct cris_unwind_cache *info;
- int i;
if ((*this_prologue_cache))
- return (*this_prologue_cache);
+ return (struct cris_unwind_cache *) (*this_prologue_cache);
info = FRAME_OBSTACK_ZALLOC (struct cris_unwind_cache);
(*this_prologue_cache) = info;
- info->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+ info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
/* Zero all fields. */
info->prev_sp = 0;
info->leaf_function = 0;
/* Prologue analysis does the rest... */
- if (cris_version () == 32)
- crisv32_scan_prologue (frame_func_unwind (next_frame, NORMAL_FRAME),
- next_frame, info);
+ if (tdep->cris_version == 32)
+ crisv32_scan_prologue (get_frame_func (this_frame), this_frame, info);
else
- cris_scan_prologue (frame_func_unwind (next_frame, NORMAL_FRAME),
- next_frame, info);
+ cris_scan_prologue (get_frame_func (this_frame), this_frame, info);
return info;
}
frame. This will be used to create a new GDB frame struct. */
static void
-cris_frame_this_id (struct frame_info *next_frame,
+cris_frame_this_id (struct frame_info *this_frame,
void **this_prologue_cache,
struct frame_id *this_id)
{
struct cris_unwind_cache *info
- = cris_frame_unwind_cache (next_frame, this_prologue_cache);
+ = cris_frame_unwind_cache (this_frame, this_prologue_cache);
CORE_ADDR base;
CORE_ADDR func;
struct frame_id id;
/* The FUNC is easy. */
- func = frame_func_unwind (next_frame, NORMAL_FRAME);
+ func = get_frame_func (this_frame);
/* Hopefully the prologue analysis either correctly determined the
frame's base (which is the SP from the previous frame), or set
(*this_id) = id;
}
-static void
-cris_frame_prev_register (struct frame_info *next_frame,
- void **this_prologue_cache,
- int regnum, int *optimizedp,
- enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, gdb_byte *bufferp)
+static struct value *
+cris_frame_prev_register (struct frame_info *this_frame,
+ void **this_prologue_cache, int regnum)
{
struct cris_unwind_cache *info
- = cris_frame_unwind_cache (next_frame, this_prologue_cache);
- trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
- optimizedp, lvalp, addrp, realnump, bufferp);
+ = cris_frame_unwind_cache (this_frame, this_prologue_cache);
+ return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
}
-/* Assuming NEXT_FRAME->prev is a dummy, return the frame ID of that
- dummy frame. The frame ID's base needs to match the TOS value
- saved by save_dummy_frame_tos(), and the PC match the dummy frame's
- breakpoint. */
+/* Assuming THIS_FRAME is a dummy, return the frame ID of that dummy
+ frame. The frame ID's base needs to match the TOS value saved by
+ save_dummy_frame_tos(), and the PC match the dummy frame's breakpoint. */
static struct frame_id
-cris_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame)
+cris_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
{
- return frame_id_build (cris_unwind_sp (gdbarch, next_frame),
- frame_pc_unwind (next_frame));
+ CORE_ADDR sp;
+ sp = get_frame_register_unsigned (this_frame, gdbarch_sp_regnum (gdbarch));
+ return frame_id_build (sp, get_frame_pc (this_frame));
}
static CORE_ADDR
int nargs, struct value **args, CORE_ADDR sp,
int struct_return, CORE_ADDR struct_addr)
{
- int stack_alloc;
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
int stack_offset;
int argreg;
int argnum;
- CORE_ADDR regval;
-
/* The function's arguments and memory allocated by gdb for the arguments to
point at reside in separate areas on the stack.
Both frame pointers grow toward higher addresses. */
for (argnum = 0; argnum < nargs; argnum++)
{
int len;
- char *val;
+ const gdb_byte *val;
int reg_demand;
int i;
len = TYPE_LENGTH (value_type (args[argnum]));
- val = (char *) value_contents (args[argnum]);
+ val = value_contents (args[argnum]);
/* How may registers worth of storage do we need for this argument? */
reg_demand = (len / 4) + (len % 4 != 0 ? 1 : 0);
else
{
gdb_byte buf[4];
- store_unsigned_integer (buf, 4, sp);
+ store_unsigned_integer (buf, 4, byte_order, sp);
si = push_stack_item (si, buf, 4);
}
}
static const struct frame_unwind cris_frame_unwind =
{
NORMAL_FRAME,
+ default_frame_unwind_stop_reason,
cris_frame_this_id,
- cris_frame_prev_register
+ cris_frame_prev_register,
+ NULL,
+ default_frame_sniffer
};
-const struct frame_unwind *
-cris_frame_sniffer (struct frame_info *next_frame)
-{
- return &cris_frame_unwind;
-}
-
static CORE_ADDR
-cris_frame_base_address (struct frame_info *next_frame, void **this_cache)
+cris_frame_base_address (struct frame_info *this_frame, void **this_cache)
{
struct cris_unwind_cache *info
- = cris_frame_unwind_cache (next_frame, this_cache);
+ = cris_frame_unwind_cache (this_frame, this_cache);
return info->base;
}
the subq-instruction will be present with X as the number of bytes
needed for storage. The reshuffle with respect to r8 may be performed
with any size S (b, w, d) and any of the general registers Z={0..13}.
- The offset U should be representable by a signed 8-bit value in all cases.
+ The offset U should be representable by a signed 8-bit value in all cases.
Thus, the prefix word is assumed to be immediate byte offset mode followed
by another word containing the instruction.
move.d r13,rV ; P3
move.S [r8+U],rZ ; P4
- if any of the call parameters are stored. The host expects these
+ if any of the call parameters are stored. The host expects these
instructions to be executed in order to get the call parameters right. */
/* Examine the prologue of a function. The variable ip is the address of
determine that it is a prologue (1). */
static CORE_ADDR
-cris_scan_prologue (CORE_ADDR pc, struct frame_info *next_frame,
+cris_scan_prologue (CORE_ADDR pc, struct frame_info *this_frame,
struct cris_unwind_cache *info)
{
- struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+
/* Present instruction. */
unsigned short insn;
val = 0;
regsave = -1;
- /* If we were called without a next_frame, that means we were called
+ /* If we were called without a this_frame, that means we were called
from cris_skip_prologue which already tried to find the end of the
prologue through the symbol information. 64 instructions past current
pc is arbitrarily chosen, but at least it means we'll stop eventually. */
- limit = next_frame ? frame_pc_unwind (next_frame) : pc + 64;
+ limit = this_frame ? get_frame_pc (this_frame) : pc + 64;
/* Find the prologue instructions. */
while (pc > 0 && pc < limit)
{
- insn = read_memory_unsigned_integer (pc, 2);
+ insn = read_memory_unsigned_integer (pc, 2, byte_order);
pc += 2;
if (insn == 0xE1FC)
{
- /* push <reg> 32 bit instruction */
- insn_next = read_memory_unsigned_integer (pc, 2);
+ /* push <reg> 32 bit instruction. */
+ insn_next = read_memory_unsigned_integer (pc, 2, byte_order);
pc += 2;
regno = cris_get_operand2 (insn_next);
if (info)
{
info->sp_offset += -cris_get_signed_offset (insn);
}
- insn_next = read_memory_unsigned_integer (pc, 2);
+ insn_next = read_memory_unsigned_integer (pc, 2, byte_order);
pc += 2;
if (cris_get_mode (insn_next) == PREFIX_ASSIGN_MODE
&& cris_get_opcode (insn_next) == 0x000F
&& (cris_get_signed_offset (insn) < 0))
{
/* move.S rZ,[r8-U] (?) */
- insn_next = read_memory_unsigned_integer (pc, 2);
+ insn_next = read_memory_unsigned_integer (pc, 2, byte_order);
pc += 2;
regno = cris_get_operand2 (insn_next);
if ((regno >= 0 && regno < gdbarch_sp_regnum (gdbarch))
&& (cris_get_signed_offset (insn) > 0))
{
/* move.S [r8+U],rZ (?) */
- insn_next = read_memory_unsigned_integer (pc, 2);
+ insn_next = read_memory_unsigned_integer (pc, 2, byte_order);
pc += 2;
regno = cris_get_operand2 (insn_next);
if ((regno >= 0 && regno < gdbarch_sp_regnum (gdbarch))
}
}
- /* We only want to know the end of the prologue when next_frame and info
+ /* We only want to know the end of the prologue when this_frame and info
are NULL (called from cris_skip_prologue i.e.). */
- if (next_frame == NULL && info == NULL)
+ if (this_frame == NULL && info == NULL)
{
return pc;
}
/* The SP was moved to the FP. This indicates that a new frame
was created. Get THIS frame's FP value by unwinding it from
the next frame. */
- this_base = frame_unwind_register_unsigned (next_frame, CRIS_FP_REGNUM);
+ this_base = get_frame_register_unsigned (this_frame, CRIS_FP_REGNUM);
info->base = this_base;
info->saved_regs[CRIS_FP_REGNUM].addr = info->base;
ULONGEST this_base;
/* Assume that the FP is this frame's SP but with that pushed
stack space added back. */
- this_base = frame_unwind_register_unsigned (next_frame,
- gdbarch_sp_regnum (gdbarch));
+ this_base = get_frame_register_unsigned (this_frame,
+ gdbarch_sp_regnum (gdbarch));
info->base = this_base;
info->prev_sp = info->base + info->size;
}
}
static CORE_ADDR
-crisv32_scan_prologue (CORE_ADDR pc, struct frame_info *next_frame,
+crisv32_scan_prologue (CORE_ADDR pc, struct frame_info *this_frame,
struct cris_unwind_cache *info)
{
- struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
ULONGEST this_base;
/* Unlike the CRISv10 prologue scanner (cris_scan_prologue), this is not
the stack pointer is not adjusted, and (as a consequence) the return
address is not pushed onto the stack. */
- /* We only want to know the end of the prologue when next_frame and info
+ /* We only want to know the end of the prologue when this_frame and info
are NULL (called from cris_skip_prologue i.e.). */
- if (next_frame == NULL && info == NULL)
+ if (this_frame == NULL && info == NULL)
{
return pc;
}
/* The SP is assumed to be unaltered. */
- this_base = frame_unwind_register_unsigned (next_frame,
- gdbarch_sp_regnum (gdbarch));
+ this_base = get_frame_register_unsigned (this_frame,
+ gdbarch_sp_regnum (gdbarch));
info->base = this_base;
info->prev_sp = this_base;
static CORE_ADDR
cris_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
CORE_ADDR func_addr, func_end;
struct symtab_and_line sal;
CORE_ADDR pc_after_prologue;
return sal.end;
}
- if (cris_version () == 32)
+ if (tdep->cris_version == 32)
pc_after_prologue = crisv32_scan_prologue (pc, NULL, NULL);
else
pc_after_prologue = cris_scan_prologue (pc, NULL, NULL);
the breakpoint should be inserted. */
static const unsigned char *
-cris_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *lenptr)
+cris_breakpoint_from_pc (struct gdbarch *gdbarch,
+ CORE_ADDR *pcptr, int *lenptr)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
static unsigned char break8_insn[] = {0x38, 0xe9};
static unsigned char break15_insn[] = {0x3f, 0xe9};
*lenptr = 2;
- if (cris_mode () == cris_mode_guru)
+ if (tdep->cris_mode == cris_mode_guru)
return break15_insn;
else
return break8_insn;
0 otherwise. */
static int
-cris_spec_reg_applicable (struct cris_spec_reg spec_reg)
+cris_spec_reg_applicable (struct gdbarch *gdbarch,
+ struct cris_spec_reg spec_reg)
{
- int version = cris_version ();
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ unsigned int version = tdep->cris_version;
switch (spec_reg.applicable_version)
{
for (i = 0; cris_spec_regs[i].name != NULL; i++)
{
if (cris_spec_regs[i].number == spec_regno
- && cris_spec_reg_applicable (cris_spec_regs[i]))
+ && cris_spec_reg_applicable (gdbarch, cris_spec_regs[i]))
/* Go with the first applicable register. */
return cris_spec_regs[i].reg_size;
}
/* There are three kinds of registers we refuse to write to.
1. Those that not implemented.
2. Those that are read-only (depends on the processor mode).
- 3. Those registers to which a write has no effect.
- */
+ 3. Those registers to which a write has no effect. */
if (regno < 0
|| regno >= gdbarch_num_regs (gdbarch)
/* There are three kinds of registers we refuse to write to.
1. Those that not implemented.
2. Those that are read-only (depends on the processor mode).
- 3. Those registers to which a write has no effect.
- */
+ 3. Those registers to which a write has no effect. */
if (regno < 0
|| regno >= gdbarch_num_regs (gdbarch)
cris_register_type (struct gdbarch *gdbarch, int regno)
{
if (regno == gdbarch_pc_regnum (gdbarch))
- return builtin_type_void_func_ptr;
+ return builtin_type (gdbarch)->builtin_func_ptr;
else if (regno == gdbarch_sp_regnum (gdbarch)
|| regno == CRIS_FP_REGNUM)
- return builtin_type_void_data_ptr;
+ return builtin_type (gdbarch)->builtin_data_ptr;
else if ((regno >= 0 && regno < gdbarch_sp_regnum (gdbarch))
|| (regno >= MOF_REGNUM && regno <= USP_REGNUM))
/* Note: R8 taken care of previous clause. */
- return builtin_type_uint32;
+ return builtin_type (gdbarch)->builtin_uint32;
else if (regno >= P4_REGNUM && regno <= CCR_REGNUM)
- return builtin_type_uint16;
+ return builtin_type (gdbarch)->builtin_uint16;
else if (regno >= P0_REGNUM && regno <= VR_REGNUM)
- return builtin_type_uint8;
+ return builtin_type (gdbarch)->builtin_uint8;
else
/* Invalid (unimplemented) register. */
- return builtin_type_int0;
+ return builtin_type (gdbarch)->builtin_int0;
}
static struct type *
crisv32_register_type (struct gdbarch *gdbarch, int regno)
{
if (regno == gdbarch_pc_regnum (gdbarch))
- return builtin_type_void_func_ptr;
+ return builtin_type (gdbarch)->builtin_func_ptr;
else if (regno == gdbarch_sp_regnum (gdbarch)
|| regno == CRIS_FP_REGNUM)
- return builtin_type_void_data_ptr;
+ return builtin_type (gdbarch)->builtin_data_ptr;
else if ((regno >= 0 && regno <= ACR_REGNUM)
|| (regno >= EXS_REGNUM && regno <= SPC_REGNUM)
|| (regno == PID_REGNUM)
|| (regno >= S0_REGNUM && regno <= S15_REGNUM))
/* Note: R8 and SP taken care of by previous clause. */
- return builtin_type_uint32;
+ return builtin_type (gdbarch)->builtin_uint32;
else if (regno == WZ_REGNUM)
- return builtin_type_uint16;
+ return builtin_type (gdbarch)->builtin_uint16;
else if (regno == BZ_REGNUM || regno == VR_REGNUM || regno == SRS_REGNUM)
- return builtin_type_uint8;
+ return builtin_type (gdbarch)->builtin_uint8;
else
{
/* Invalid (unimplemented) register. Should not happen as there are
no unimplemented CRISv32 registers. */
warning (_("crisv32_register_type: unknown regno %d"), regno);
- return builtin_type_int0;
+ return builtin_type (gdbarch)->builtin_int0;
}
}
static void
cris_store_return_value (struct type *type, struct regcache *regcache,
- const void *valbuf)
+ const gdb_byte *valbuf)
{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
ULONGEST val;
int len = TYPE_LENGTH (type);
if (len <= 4)
{
/* Put the return value in R10. */
- val = extract_unsigned_integer (valbuf, len);
+ val = extract_unsigned_integer (valbuf, len, byte_order);
regcache_cooked_write_unsigned (regcache, ARG1_REGNUM, val);
}
else if (len <= 8)
{
/* Put the return value in R10 and R11. */
- val = extract_unsigned_integer (valbuf, 4);
+ val = extract_unsigned_integer (valbuf, 4, byte_order);
regcache_cooked_write_unsigned (regcache, ARG1_REGNUM, val);
- val = extract_unsigned_integer ((char *)valbuf + 4, len - 4);
+ val = extract_unsigned_integer (valbuf + 4, len - 4, byte_order);
regcache_cooked_write_unsigned (regcache, ARG2_REGNUM, val);
}
else
error (_("cris_store_return_value: type length too large."));
}
-/* Return the name of register regno as a string. Return NULL for an invalid or
- unimplemented register. */
+/* Return the name of register regno as a string. Return NULL for an
+ invalid or unimplemented register. */
static const char *
-cris_special_register_name (int regno)
+cris_special_register_name (struct gdbarch *gdbarch, int regno)
{
int spec_regno;
int i;
for (i = 0; cris_spec_regs[i].name != NULL; i++)
{
if (cris_spec_regs[i].number == spec_regno
- && cris_spec_reg_applicable (cris_spec_regs[i]))
+ && cris_spec_reg_applicable (gdbarch, cris_spec_regs[i]))
/* Go with the first applicable register. */
return cris_spec_regs[i].name;
}
}
else if (regno >= NUM_GENREGS && regno < gdbarch_num_regs (gdbarch))
{
- return cris_special_register_name (regno);
+ return cris_special_register_name (gdbarch, regno);
}
else
{
}
else if (regno >= NUM_GENREGS && regno < (NUM_GENREGS + NUM_SPECREGS))
{
- return cris_special_register_name (regno);
+ return cris_special_register_name (gdbarch, regno);
}
else if (regno == gdbarch_pc_regnum (gdbarch))
{
if (reg >= 0 && reg < ARRAY_SIZE (cris_dwarf_regmap))
regnum = cris_dwarf_regmap[reg];
- if (regnum == -1)
- warning (_("Unmapped DWARF Register #%d encountered."), reg);
-
return regnum;
}
static void
cris_dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum,
struct dwarf2_frame_state_reg *reg,
- struct frame_info *next_frame)
+ struct frame_info *this_frame)
{
/* The return address column. */
if (regnum == gdbarch_pc_regnum (gdbarch))
static void
cris_extract_return_value (struct type *type, struct regcache *regcache,
- void *valbuf)
+ gdb_byte *valbuf)
{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
ULONGEST val;
int len = TYPE_LENGTH (type);
{
/* Get the return value from R10. */
regcache_cooked_read_unsigned (regcache, ARG1_REGNUM, &val);
- store_unsigned_integer (valbuf, len, val);
+ store_unsigned_integer (valbuf, len, byte_order, val);
}
else if (len <= 8)
{
/* Get the return value from R10 and R11. */
regcache_cooked_read_unsigned (regcache, ARG1_REGNUM, &val);
- store_unsigned_integer (valbuf, 4, val);
+ store_unsigned_integer (valbuf, 4, byte_order, val);
regcache_cooked_read_unsigned (regcache, ARG2_REGNUM, &val);
- store_unsigned_integer ((char *)valbuf + 4, len - 4, val);
+ store_unsigned_integer (valbuf + 4, len - 4, byte_order, val);
}
else
error (_("cris_extract_return_value: type length too large"));
/* Handle the CRIS return value convention. */
static enum return_value_convention
-cris_return_value (struct gdbarch *gdbarch, struct type *func_type,
+cris_return_value (struct gdbarch *gdbarch, struct value *function,
struct type *type, struct regcache *regcache,
gdb_byte *readbuf, const gdb_byte *writebuf)
{
instruction. It stems from cris_constraint, found in cris-dis.c. */
static int
-constraint (unsigned int insn, const signed char *inst_args,
+constraint (unsigned int insn, const char *inst_args,
inst_env_type *inst_env)
{
int retval = 0;
int tmp, i;
- const char *s = inst_args;
+ const gdb_byte *s = (const gdb_byte *) inst_args;
for (; *s; s++)
switch (*s)
int offset;
unsigned short insn;
struct gdbarch *gdbarch = get_frame_arch (frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
/* Create a local register image and set the initial state. */
for (i = 0; i < NUM_GENREGS; i++)
inst_env->invalid = 0;
inst_env->xflag_found = 0;
inst_env->disable_interrupt = 0;
+ inst_env->byte_order = byte_order;
/* Look for a step target. */
do
{
/* Read an instruction from the client. */
insn = read_memory_unsigned_integer
- (inst_env->reg[gdbarch_pc_regnum (gdbarch)], 2);
+ (inst_env->reg[gdbarch_pc_regnum (gdbarch)], 2, byte_order);
/* If the instruction is not in a delay slot the new content of the
PC is [PC] + 2. If the instruction is in a delay slot it is not
}
/* There is no hardware single-step support. The function find_step_target
- digs through the opcodes in order to find all possible targets.
+ digs through the opcodes in order to find all possible targets.
Either one ordinary target or two targets for branches may be found. */
static int
cris_software_single_step (struct frame_info *frame)
{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct address_space *aspace = get_frame_address_space (frame);
inst_env_type inst_env;
/* Analyse the present instruction environment and insert
{
/* Insert at most two breakpoints. One for the next PC content
and possibly another one for a branch, jump, etc. */
- CORE_ADDR next_pc =
- (CORE_ADDR) inst_env.reg[gdbarch_pc_regnum (get_frame_arch (frame))];
- insert_single_step_breakpoint (next_pc);
+ CORE_ADDR next_pc
+ = (CORE_ADDR) inst_env.reg[gdbarch_pc_regnum (gdbarch)];
+ insert_single_step_breakpoint (gdbarch, aspace, next_pc);
if (inst_env.branch_found
&& (CORE_ADDR) inst_env.branch_break_address != next_pc)
{
CORE_ADDR branch_target_address
= (CORE_ADDR) inst_env.branch_break_address;
- insert_single_step_breakpoint (branch_target_address);
+ insert_single_step_breakpoint (gdbarch,
+ aspace, branch_target_address);
}
}
/* Just a forward declaration. */
static unsigned long get_data_from_address (unsigned short *inst,
- CORE_ADDR address);
+ CORE_ADDR address,
+ enum bfd_endian byte_order);
/* Calculates the prefix value for the general case of offset addressing
mode. */
static void
bdap_prefix (unsigned short inst, inst_env_type *inst_env)
{
-
- long offset;
-
/* It's invalid to be in a delay slot. */
if (inst_env->slot_needed || inst_env->prefix_found)
{
/* The offset is an indirection of the contents of the operand1 register. */
inst_env->prefix_value +=
- get_data_from_address (&inst, inst_env->reg[cris_get_operand1 (inst)]);
+ get_data_from_address (&inst, inst_env->reg[cris_get_operand1 (inst)],
+ inst_env->byte_order);
if (cris_get_mode (inst) == AUTOINC_MODE)
{
/* The prefix value is one dereference of the contents of the operand1
register. */
address = (CORE_ADDR) inst_env->reg[cris_get_operand1 (inst)];
- inst_env->prefix_value = read_memory_unsigned_integer (address, 4);
+ inst_env->prefix_value
+ = read_memory_unsigned_integer (address, 4, inst_env->byte_order);
/* Check if the mode is autoincrement. */
if (cris_get_mode (inst) == AUTOINC_MODE)
}
/* We have a branch, find out the offset for the branch. */
- offset = read_memory_integer (inst_env->reg[REG_PC], 2);
+ offset = read_memory_integer (inst_env->reg[REG_PC], 2,
+ inst_env->byte_order);
/* The instruction is one word longer than normal, so add one word
to the PC. */
return;
}
/* Get the number of bits to shift. */
- shift_steps = cris_get_asr_shift_steps (inst_env->reg[cris_get_operand1 (inst)]);
+ shift_steps
+ = cris_get_asr_shift_steps (inst_env->reg[cris_get_operand1 (inst)]);
value = inst_env->reg[REG_PC];
/* Find out how many bits the operation should apply to. */
return;
}
/* The shift size is given as a 5 bit quick value, i.e. we don't
- want the the sign bit of the quick value. */
+ want the sign bit of the quick value. */
shift_steps = cris_get_asr_shift_steps (inst);
value = inst_env->reg[REG_PC];
if (value & SIGNED_DWORD_MASK)
{
check_assign (inst, inst_env);
- /* Get the new value for the the PC. */
+ /* Get the new value for the PC. */
newpc =
read_memory_unsigned_integer ((CORE_ADDR) inst_env->prefix_value,
- 4);
+ 4, inst_env->byte_order);
}
else
{
/* Get the new value for the PC. */
address = (CORE_ADDR) inst_env->reg[cris_get_operand1 (inst)];
- newpc = read_memory_unsigned_integer (address, 4);
+ newpc = read_memory_unsigned_integer (address,
+ 4, inst_env->byte_order);
/* Check if we should increment a register. */
if (cris_get_mode (inst) == AUTOINC_MODE)
if (cris_get_operand2 (inst) >= REG_PC)
{
inst_env->reg[REG_PC] =
- read_memory_unsigned_integer (inst_env->prefix_value, 4);
+ read_memory_unsigned_integer (inst_env->prefix_value,
+ 4, inst_env->byte_order);
}
/* The assign value is the value after the increment. Normally, the
assign value is the value before the increment. */
}
inst_env->reg[REG_PC] =
read_memory_unsigned_integer (inst_env->reg[cris_get_operand1 (inst)],
- 4);
+ 4, inst_env->byte_order);
}
/* The increment is not depending on the size, instead it's depending
on the number of registers loaded from memory. */
- if ((cris_get_operand1 (inst) == REG_PC) && (cris_get_mode (inst) == AUTOINC_MODE))
+ if ((cris_get_operand1 (inst) == REG_PC)
+ && (cris_get_mode (inst) == AUTOINC_MODE))
{
/* It's invalid to change the PC in a delay slot. */
if (inst_env->slot_needed)
{
/* The assign value is the value after the increment. Normally, the
assign value is the value before the increment. */
- if ((cris_get_operand1 (inst) == REG_PC) &&
- (cris_get_mode (inst) == PREFIX_ASSIGN_MODE))
+ if ((cris_get_operand1 (inst) == REG_PC)
+ && (cris_get_mode (inst) == PREFIX_ASSIGN_MODE))
{
/* The prefix handles the problem if we are in a delay slot. */
inst_env->reg[REG_PC] = inst_env->prefix_value;
{
/* The increment is not depending on the size, instead it's depending
on the number of registers loaded to memory. */
- if ((cris_get_operand1 (inst) == REG_PC) && (cris_get_mode (inst) == AUTOINC_MODE))
+ if ((cris_get_operand1 (inst) == REG_PC)
+ && (cris_get_mode (inst) == AUTOINC_MODE))
{
/* It's invalid to change the PC in a delay slot. */
if (inst_env->slot_needed)
inst_env->disable_interrupt = 0;
}
-/* Calculate the result of the instruction for ADD, SUB, CMP AND, OR and MOVE.
+/* Calculate the result of the instruction for ADD, SUB, CMP AND, OR and MOVE.
The MOVE instruction is the move from source to register. */
static void
extend instruction, the size field is changed in instruction. */
static unsigned long
-get_data_from_address (unsigned short *inst, CORE_ADDR address)
+get_data_from_address (unsigned short *inst, CORE_ADDR address,
+ enum bfd_endian byte_order)
{
int size = cris_get_size (*inst);
unsigned long value;
/* Is there a need for checking the size? Size should contain the number of
bytes to read. */
size = 1 << size;
- value = read_memory_unsigned_integer (address, size);
+ value = read_memory_unsigned_integer (address, size, byte_order);
/* Check if it's an extend, signed or zero instruction. */
if (cris_get_opcode (*inst) < 4)
operand2 = inst_env->reg[REG_PC];
/* Get the value of the third operand. */
- operand3 = get_data_from_address (&inst, inst_env->prefix_value);
+ operand3 = get_data_from_address (&inst, inst_env->prefix_value,
+ inst_env->byte_order);
/* Calculate the PC value after the instruction, i.e. where the
breakpoint should be. The order of the udw_operands is vital. */
operand2 = inst_env->reg[cris_get_operand2 (inst)];
/* Get the value of the third operand. */
- operand3 = get_data_from_address (&inst, inst_env->prefix_value);
+ operand3 = get_data_from_address (&inst, inst_env->prefix_value,
+ inst_env->byte_order);
/* Calculate the PC value after the instruction, i.e. where the
breakpoint should be. */
unsigned long operand3;
int size;
- /* The instruction is either an indirect or autoincrement addressing mode.
+ /* The instruction is either an indirect or autoincrement addressing mode.
Check if the destination register is the PC. */
if (cris_get_operand2 (inst) == REG_PC)
{
/* Get the value of the third operand, i.e. the indirect operand. */
operand1 = inst_env->reg[cris_get_operand1 (inst)];
- operand3 = get_data_from_address (&inst, operand1);
+ operand3 = get_data_from_address (&inst, operand1, inst_env->byte_order);
/* Calculate the PC value after the instruction, i.e. where the
breakpoint should be. The order of the udw_operands is vital. */
}
/* If this is an autoincrement addressing mode, check if the increment
changes the PC. */
- if ((cris_get_operand1 (inst) == REG_PC) && (cris_get_mode (inst) == AUTOINC_MODE))
+ if ((cris_get_operand1 (inst) == REG_PC)
+ && (cris_get_mode (inst) == AUTOINC_MODE))
{
/* Get the size field. */
size = cris_get_size (inst);
return print_insn (addr, info);
}
-/* Copied from <asm/elf.h>. */
-typedef unsigned long elf_greg_t;
+/* Originally from <asm/elf.h>. */
+typedef unsigned char cris_elf_greg_t[4];
/* Same as user_regs_struct struct in <asm/user.h>. */
#define CRISV10_ELF_NGREG 35
-typedef elf_greg_t elf_gregset_t[CRISV10_ELF_NGREG];
+typedef cris_elf_greg_t cris_elf_gregset_t[CRISV10_ELF_NGREG];
#define CRISV32_ELF_NGREG 32
-typedef elf_greg_t crisv32_elf_gregset_t[CRISV32_ELF_NGREG];
+typedef cris_elf_greg_t crisv32_elf_gregset_t[CRISV32_ELF_NGREG];
-/* Unpack an elf_gregset_t into GDB's register cache. */
+/* Unpack a cris_elf_gregset_t into GDB's register cache. */
static void
-cris_supply_gregset (struct regcache *regcache, elf_gregset_t *gregsetp)
+cris_supply_gregset (struct regcache *regcache, cris_elf_gregset_t *gregsetp)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int i;
- elf_greg_t *regp = *gregsetp;
- static char zerobuf[4] = {0};
+ cris_elf_greg_t *regp = *gregsetp;
/* The kernel dumps all 32 registers as unsigned longs, but supply_register
knows about the actual size of each register so that's no problem. */
char *core_reg_sect, unsigned core_reg_size,
int which, CORE_ADDR reg_addr)
{
- elf_gregset_t gregset;
+ cris_elf_gregset_t gregset;
switch (which)
{
case 0:
- if (core_reg_size != sizeof (elf_gregset_t)
+ if (core_reg_size != sizeof (cris_elf_gregset_t)
&& core_reg_size != sizeof (crisv32_elf_gregset_t))
{
warning (_("wrong size gregset struct in core file"));
void
_initialize_cris_tdep (void)
{
- static struct cmd_list_element *cris_set_cmdlist;
- static struct cmd_list_element *cris_show_cmdlist;
-
struct cmd_list_element *c;
gdbarch_register (bfd_arch_cris, cris_gdbarch_init, cris_dump_tdep);
/* CRIS-specific user-commands. */
- add_setshow_uinteger_cmd ("cris-version", class_support,
- &usr_cmd_cris_version,
- _("Set the current CRIS version."),
- _("Show the current CRIS version."),
- _("\
+ add_setshow_zuinteger_cmd ("cris-version", class_support,
+ &usr_cmd_cris_version,
+ _("Set the current CRIS version."),
+ _("Show the current CRIS version."),
+ _("\
Set to 10 for CRISv10 or 32 for CRISv32 if autodetection fails.\n\
Defaults to 10. "),
- set_cris_version,
- NULL, /* FIXME: i18n: Current CRIS version is %s. */
- &setlist, &showlist);
+ set_cris_version,
+ NULL, /* FIXME: i18n: Current CRIS version
+ is %s. */
+ &setlist, &showlist);
add_setshow_enum_cmd ("cris-mode", class_support,
cris_modes, &usr_cmd_cris_mode,
_("Show the usage of Dwarf-2 CFI for CRIS."),
_("Set this to \"off\" if using gcc-cris < R59."),
set_cris_dwarf2_cfi,
- NULL, /* FIXME: i18n: Usage of Dwarf-2 CFI for CRIS is %d. */
+ NULL, /* FIXME: i18n: Usage of Dwarf-2 CFI
+ for CRIS is %d. */
&setlist, &showlist);
deprecated_add_core_fns (&cris_elf_core_fns);
{
struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
- int cris_version;
+ unsigned int cris_version;
if (usr_cmd_cris_version_valid)
{
}
/* No matching architecture was found. Create a new one. */
- tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
+ tdep = XNEW (struct gdbarch_tdep);
gdbarch = gdbarch_alloc (&info, tdep);
tdep->cris_version = usr_cmd_cris_version;
break;
case BFD_ENDIAN_BIG:
- internal_error (__FILE__, __LINE__, _("cris_gdbarch_init: big endian byte order in info"));
+ internal_error (__FILE__, __LINE__,
+ _("cris_gdbarch_init: big endian byte order in info"));
break;
default:
- internal_error (__FILE__, __LINE__, _("cris_gdbarch_init: unknown byte order in info"));
+ internal_error (__FILE__, __LINE__,
+ _("cris_gdbarch_init: unknown byte order in info"));
}
set_gdbarch_return_value (gdbarch, cris_return_value);
set_gdbarch_unwind_pc (gdbarch, cris_unwind_pc);
set_gdbarch_unwind_sp (gdbarch, cris_unwind_sp);
- set_gdbarch_unwind_dummy_id (gdbarch, cris_unwind_dummy_id);
+ set_gdbarch_dummy_id (gdbarch, cris_dummy_id);
if (tdep->cris_dwarf2_cfi == 1)
{
/* Hook in the Dwarf-2 frame sniffer. */
set_gdbarch_dwarf2_reg_to_regnum (gdbarch, cris_dwarf2_reg_to_regnum);
dwarf2_frame_set_init_reg (gdbarch, cris_dwarf2_frame_init_reg);
- frame_unwind_append_sniffer (gdbarch, dwarf2_frame_sniffer);
+ dwarf2_append_unwinders (gdbarch);
}
if (tdep->cris_mode != cris_mode_guru)
{
- frame_unwind_append_sniffer (gdbarch, cris_sigtramp_frame_sniffer);
+ frame_unwind_append_unwinder (gdbarch, &cris_sigtramp_frame_unwind);
}
- frame_unwind_append_sniffer (gdbarch, cris_frame_sniffer);
+ frame_unwind_append_unwinder (gdbarch, &cris_frame_unwind);
frame_base_set_default (gdbarch, &cris_frame_base);
- set_solib_svr4_fetch_link_map_offsets
- (gdbarch, svr4_ilp32_fetch_link_map_offsets);
-
+ /* Hook in ABI-specific overrides, if they have been registered. */
+ gdbarch_init_osabi (info, gdbarch);
+
/* FIXME: cagney/2003-08-27: It should be possible to select a CRIS
disassembler, even when there is no BFD. Does something like
"gdb; target remote; disassmeble *0x123" work? */