-/* Target-dependent code for Mitsubishi D10V, for GDB.
+/* Target-dependent code for Renesas D10V, for GDB.
Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software
Foundation, Inc.
#include "gdb/sim-d10v.h"
#include "sim-regno.h"
#include "disasm.h"
+#include "trad-frame.h"
#include "gdb_assert.h"
};
/* These are the addresses the D10V-EVA board maps data and
- instruction memory to. */
+ instruction memory to. */
enum memspace {
DMEM_START = 0x2000000,
STACK_START = 0x200bffe
};
-/* d10v register names. */
+/* d10v register names. */
enum
{
NR_A_REGS = 2,
TS2_NUM_REGS = 37,
TS3_NUM_REGS = 42,
- /* d10v calling convention. */
+ /* d10v calling convention. */
ARG1_REGNUM = R0_REGNUM,
- ARGN_REGNUM = R3_REGNUM,
- RET1_REGNUM = R0_REGNUM,
+ ARGN_REGNUM = R3_REGNUM
};
-int
+static int
nr_dmap_regs (struct gdbarch *gdbarch)
{
return gdbarch_tdep (gdbarch)->nr_dmap_regs;
}
-int
+static int
a0_regnum (struct gdbarch *gdbarch)
{
return gdbarch_tdep (gdbarch)->a0_regnum;
extern void _initialize_d10v_tdep (void);
-static CORE_ADDR d10v_read_sp (void);
-
static void d10v_eva_prepare_to_trace (void);
static void d10v_eva_get_trace_data (void);
return sp & ~3;
}
-/* Should we use EXTRACT_STRUCT_VALUE_ADDRESS instead of
- EXTRACT_RETURN_VALUE? GCC_P is true if compiled with gcc
- and TYPE is the type (which is known to be struct, union or array).
-
- The d10v returns anything less than 8 bytes in size in
- registers. */
-
-static int
-d10v_use_struct_convention (int gcc_p, struct type *type)
-{
- long alignment;
- int i;
- /* The d10v only passes a struct in a register when that structure
- has an alignment that matches the size of a register. */
- /* If the structure doesn't fit in 4 registers, put it on the
- stack. */
- if (TYPE_LENGTH (type) > 8)
- return 1;
- /* If the struct contains only one field, don't put it on the stack
- - gcc can fit it in one or more registers. */
- if (TYPE_NFIELDS (type) == 1)
- return 0;
- alignment = TYPE_LENGTH (TYPE_FIELD_TYPE (type, 0));
- for (i = 1; i < TYPE_NFIELDS (type); i++)
- {
- /* If the alignment changes, just assume it goes on the
- stack. */
- if (TYPE_LENGTH (TYPE_FIELD_TYPE (type, i)) != alignment)
- return 1;
- }
- /* If the alignment is suitable for the d10v's 16 bit registers,
- don't put it on the stack. */
- if (alignment == 2 || alignment == 4)
- return 0;
- return 1;
-}
-
-
static const unsigned char *
d10v_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
{
}
/* Map the REG_NR onto an ascii name. Return NULL or an empty string
- when the reg_nr isn't valid. */
+ when the reg_nr isn't valid. */
enum ts2_regnums
{
return reg;
}
-/* MAP GDB's internal register numbering (determined by the layout fo
- the REGISTER_BYTE array) onto the simulator's register
- numbering. */
+/* MAP GDB's internal register numbering (determined by the layout
+ from the DEPRECATED_REGISTER_BYTE array) onto the simulator's
+ register numbering. */
static int
d10v_ts2_register_sim_regno (int nr)
d10v_register_type (struct gdbarch *gdbarch, int reg_nr)
{
if (reg_nr == D10V_PC_REGNUM)
- return builtin_type_void_func_ptr;
+ return builtin_type (gdbarch)->builtin_func_ptr;
if (reg_nr == D10V_SP_REGNUM || reg_nr == D10V_FP_REGNUM)
- return builtin_type_void_data_ptr;
+ return builtin_type (gdbarch)->builtin_data_ptr;
else if (reg_nr >= a0_regnum (gdbarch)
&& reg_nr < (a0_regnum (gdbarch) + NR_A_REGS))
return builtin_type_int64;
return builtin_type_int16;
}
-static int
-d10v_daddr_p (CORE_ADDR x)
-{
- return (((x) & 0x3000000) == DMEM_START);
-}
-
static int
d10v_iaddr_p (CORE_ADDR x)
{
d10v_make_iaddr (CORE_ADDR x)
{
if (d10v_iaddr_p (x))
- return x; /* Idempotency -- x is already in the IMEM space. */
+ return x; /* Idempotency -- x is already in the IMEM space. */
else
return (((x) << 2) | IMEM_START);
}
return val;
}
-/* Write into appropriate registers a function return value
- of type TYPE, given in virtual format.
+/* Handle the d10v's return_value convention. */
- Things always get returned in RET1_REGNUM, RET2_REGNUM, ... */
-
-static void
-d10v_store_return_value (struct type *type, struct regcache *regcache,
- const void *valbuf)
+static enum return_value_convention
+d10v_return_value (struct gdbarch *gdbarch, struct type *valtype,
+ struct regcache *regcache, void *readbuf,
+ const void *writebuf)
{
- /* Only char return values need to be shifted right within the first
- regnum. */
- if (TYPE_LENGTH (type) == 1
- && TYPE_CODE (type) == TYPE_CODE_INT)
+ if (TYPE_LENGTH (valtype) > 8)
+ /* Anything larger than 8 bytes (4 registers) goes on the stack. */
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ if (TYPE_LENGTH (valtype) == 5
+ || TYPE_LENGTH (valtype) == 6)
+ /* Anything 5 or 6 bytes in size goes in memory. Contents don't
+ appear to matter. Note that 7 and 8 byte objects do end up in
+ registers! */
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ if (TYPE_LENGTH (valtype) == 1)
{
- bfd_byte tmp[2];
- tmp[1] = *(bfd_byte *)valbuf;
- regcache_cooked_write (regcache, RET1_REGNUM, tmp);
+ /* All single byte values go in a register stored right-aligned.
+ Note: 2 byte integer values are handled further down. */
+ if (readbuf)
+ {
+ /* Since TYPE is smaller than the register, there isn't a
+ sign extension problem. Let the extraction truncate the
+ register value. */
+ ULONGEST regval;
+ regcache_cooked_read_unsigned (regcache, R0_REGNUM,
+ ®val);
+ store_unsigned_integer (readbuf, TYPE_LENGTH (valtype), regval);
+
+ }
+ if (writebuf)
+ {
+ ULONGEST regval;
+ if (TYPE_CODE (valtype) == TYPE_CODE_INT)
+ /* Some sort of integer value stored in R0. Use
+ unpack_long since that should handle any required sign
+ extension. */
+ regval = unpack_long (valtype, writebuf);
+ else
+ /* Some other type. Don't sign-extend the value when
+ storing it in the register. */
+ regval = extract_unsigned_integer (writebuf, 1);
+ regcache_cooked_write_unsigned (regcache, R0_REGNUM, regval);
+ }
+ return RETURN_VALUE_REGISTER_CONVENTION;
}
- else
+ if ((TYPE_CODE (valtype) == TYPE_CODE_STRUCT
+ || TYPE_CODE (valtype) == TYPE_CODE_UNION)
+ && TYPE_NFIELDS (valtype) > 1
+ && TYPE_FIELD_BITPOS (valtype, 1) == 8)
+ /* If a composite is 8 bit aligned (determined by looking at the
+ start address of the second field), put it in memory. */
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ /* Assume it is in registers. */
+ if (writebuf || readbuf)
{
int reg;
- /* A structure is never more than 8 bytes long. See
- use_struct_convention(). */
- gdb_assert (TYPE_LENGTH (type) <= 8);
- /* Write out most registers, stop loop before trying to write
- out any dangling byte at the end of the buffer. */
- for (reg = 0; (reg * 2) + 1 < TYPE_LENGTH (type); reg++)
+ /* Per above, the value is never more than 8 bytes long. */
+ gdb_assert (TYPE_LENGTH (valtype) <= 8);
+ /* Xfer 2 bytes at a time. */
+ for (reg = 0; (reg * 2) + 1 < TYPE_LENGTH (valtype); reg++)
{
- regcache_cooked_write (regcache, RET1_REGNUM + reg,
- (bfd_byte *) valbuf + reg * 2);
+ if (readbuf)
+ regcache_cooked_read (regcache, R0_REGNUM + reg,
+ (bfd_byte *) readbuf + reg * 2);
+ if (writebuf)
+ regcache_cooked_write (regcache, R0_REGNUM + reg,
+ (bfd_byte *) writebuf + reg * 2);
+ }
+ /* Any trailing byte ends up _left_ aligned. */
+ if ((reg * 2) < TYPE_LENGTH (valtype))
+ {
+ if (readbuf)
+ regcache_cooked_read_part (regcache, R0_REGNUM + reg,
+ 0, 1, (bfd_byte *) readbuf + reg * 2);
+ if (writebuf)
+ regcache_cooked_write_part (regcache, R0_REGNUM + reg,
+ 0, 1, (bfd_byte *) writebuf + reg * 2);
}
- /* Write out any dangling byte at the end of the buffer. */
- if ((reg * 2) + 1 == TYPE_LENGTH (type))
- regcache_cooked_write_part (regcache, reg, 0, 1,
- (bfd_byte *) valbuf + reg * 2);
}
-}
-
-/* Extract from an array REGBUF containing the (raw) register state
- the address in which a function should return its structure value,
- as a CORE_ADDR (or an expression that can be used as one). */
-
-static CORE_ADDR
-d10v_extract_struct_value_address (struct regcache *regcache)
-{
- ULONGEST addr;
- regcache_cooked_read_unsigned (regcache, ARG1_REGNUM, &addr);
- return (addr | DMEM_START);
+ return RETURN_VALUE_REGISTER_CONVENTION;
}
static int
CORE_ADDR func_addr, func_end;
struct symtab_and_line sal;
- /* If we have line debugging information, then the end of the */
- /* prologue should the first assembly instruction of the first source line */
+ /* If we have line debugging information, then the end of the prologue
+ should be the first assembly instruction of the first source line. */
if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
{
sal = find_pc_line (func_addr, 0);
}
if (target_read_memory (pc, (char *) &op, 4))
- return pc; /* Can't access it -- assume no prologue. */
+ return pc; /* Can't access it -- assume no prologue. */
while (1)
{
{
if (!check_prologue (op2))
{
- /* if the previous opcode was really part of the prologue */
- /* and not just a NOP, then we want to break after both instructions */
+ /* If the previous opcode was really part of the
+ prologue and not just a NOP, then we want to
+ break after both instructions. */
if (op1 != 0x5E00)
pc += 4;
break;
/* The frame's base, optionally used by the high-level debug info. */
CORE_ADDR base;
int size;
- CORE_ADDR *saved_regs;
/* How far the SP and r11 (FP) have been offset from the start of
the stack frame (as defined by the previous frame's stack
pointer). */
LONGEST sp_offset;
LONGEST r11_offset;
int uses_frame;
- void **regs;
+ /* Table indicating the location of each and every register. */
+ struct trad_frame_saved_reg *saved_regs;
};
static int
{
n = (op & 0x1E0) >> 5;
info->sp_offset -= 2;
- info->saved_regs[n] = info->sp_offset;
+ info->saved_regs[n].addr = info->sp_offset;
return 1;
}
{
n = (op & 0x1E0) >> 5;
info->sp_offset -= 4;
- info->saved_regs[n] = info->sp_offset;
- info->saved_regs[n + 1] = info->sp_offset + 2;
+ info->saved_regs[n + 0].addr = info->sp_offset + 0;
+ info->saved_regs[n + 1].addr = info->sp_offset + 2;
return 1;
}
if ((op & 0x7E1F) == 0x6816)
{
n = (op & 0x1E0) >> 5;
- info->saved_regs[n] = info->r11_offset;
+ info->saved_regs[n].addr = info->r11_offset;
return 1;
}
if ((op & 0x7E1F) == 0x681E)
{
n = (op & 0x1E0) >> 5;
- info->saved_regs[n] = info->sp_offset;
+ info->saved_regs[n].addr = info->sp_offset;
return 1;
}
if ((op & 0x7E3F) == 0x3A1E)
{
n = (op & 0x1E0) >> 5;
- info->saved_regs[n] = info->sp_offset;
- info->saved_regs[n + 1] = info->sp_offset + 2;
+ info->saved_regs[n + 0].addr = info->sp_offset + 0;
+ info->saved_regs[n + 1].addr = info->sp_offset + 2;
return 1;
}
the saved registers of frame described by FRAME_INFO. This
includes special registers such as pc and fp saved in special ways
in the stack frame. sp is even more special: the address we return
- for it IS the sp for the next frame. */
+ for it IS the sp for the next frame. */
-struct d10v_unwind_cache *
+static struct d10v_unwind_cache *
d10v_frame_unwind_cache (struct frame_info *next_frame,
void **this_prologue_cache)
{
info = FRAME_OBSTACK_ZALLOC (struct d10v_unwind_cache);
(*this_prologue_cache) = info;
- info->saved_regs = FRAME_OBSTACK_CALLOC (NUM_REGS, CORE_ADDR);
+ info->saved_regs = trad_frame_alloc_saved_regs (next_frame);
info->size = 0;
info->sp_offset = 0;
/* st rn, @(offset,sp) */
short offset = op & 0xFFFF;
short n = (op >> 20) & 0xF;
- info->saved_regs[n] = info->sp_offset + offset;
+ info->saved_regs[n].addr = info->sp_offset + offset;
}
else if ((op & 0x3F1F0000) == 0x350F0000)
{
/* st2w rn, @(offset,sp) */
short offset = op & 0xFFFF;
short n = (op >> 20) & 0xF;
- info->saved_regs[n] = info->sp_offset + offset;
- info->saved_regs[n + 1] = info->sp_offset + offset + 2;
+ info->saved_regs[n + 0].addr = info->sp_offset + offset + 0;
+ info->saved_regs[n + 1].addr = info->sp_offset + offset + 2;
}
else
break;
info->size = -info->sp_offset;
- /* Compute the frame's base, and the previous frame's SP. */
+ /* Compute the previous frame's stack pointer (which is also the
+ frame's ID's stack address), and this frame's base pointer. */
if (info->uses_frame)
{
/* The SP was moved to the FP. This indicates that a new frame
to before the first saved register giving the SP. */
prev_sp = this_base + info->size;
}
- else if (info->saved_regs[D10V_SP_REGNUM])
- {
- /* The SP was saved (which is very unusual), the frame base is
- just the PREV's frame's TOP-OF-STACK. */
- this_base
- = get_frame_memory_unsigned (next_frame,
- info->saved_regs[D10V_SP_REGNUM],
- register_size (gdbarch, D10V_SP_REGNUM));
- prev_sp = this_base;
- }
else
{
/* Assume that the FP is this frame's SP but with that pushed
prev_sp = this_base + info->size;
}
+ /* Convert that SP/BASE into real addresses. */
+ info->prev_sp = d10v_make_daddr (prev_sp);
info->base = d10v_make_daddr (this_base);
- info->prev_sp = d10v_make_daddr (prev_sp);
/* Adjust all the saved registers so that they contain addresses and
not offsets. */
for (i = 0; i < NUM_REGS - 1; i++)
- if (info->saved_regs[i])
+ if (trad_frame_addr_p (info->saved_regs, i))
{
- info->saved_regs[i] = (info->prev_sp + info->saved_regs[i]);
+ info->saved_regs[i].addr = (info->prev_sp + info->saved_regs[i].addr);
}
- /* The D10V_SP_REGNUM is special. Instead of the address of the SP, the
- previous frame's SP value is saved. */
- info->saved_regs[D10V_SP_REGNUM] = info->prev_sp;
+ /* The call instruction moves the caller's PC in the callee's LR.
+ Since this is an unwind, do the reverse. Copy the location of LR
+ into PC (the address / regnum) so that a request for PC will be
+ converted into a request for the LR. */
+ info->saved_regs[D10V_PC_REGNUM] = info->saved_regs[LR_REGNUM];
+
+ /* The previous frame's SP needed to be computed. Save the computed
+ value. */
+ trad_frame_set_value (info->saved_regs, D10V_SP_REGNUM,
+ d10v_make_daddr (prev_sp));
return info;
}
{
ULONGEST pc, psw, rpt_s, rpt_e, rpt_c;
- frame_read_unsigned_register (frame, D10V_PC_REGNUM, &pc);
- frame_read_unsigned_register (frame, PSW_REGNUM, &psw);
- frame_read_unsigned_register (frame, frame_map_name_to_regnum ("rpt_s", -1), &rpt_s);
- frame_read_unsigned_register (frame, frame_map_name_to_regnum ("rpt_e", -1), &rpt_e);
- frame_read_unsigned_register (frame, frame_map_name_to_regnum ("rpt_c", -1), &rpt_c);
+ pc = get_frame_register_unsigned (frame, D10V_PC_REGNUM);
+ psw = get_frame_register_unsigned (frame, PSW_REGNUM);
+ rpt_s = get_frame_register_unsigned (frame, frame_map_name_to_regnum (frame, "rpt_s", -1));
+ rpt_e = get_frame_register_unsigned (frame, frame_map_name_to_regnum (frame, "rpt_e", -1));
+ rpt_c = get_frame_register_unsigned (frame, frame_map_name_to_regnum (frame, "rpt_c", -1));
fprintf_filtered (file, "PC=%04lx (0x%lx) PSW=%04lx RPT_S=%04lx RPT_E=%04lx RPT_C=%04lx\n",
(long) pc, (long) d10v_make_iaddr (pc), (long) psw,
(long) rpt_s, (long) rpt_e, (long) rpt_c);
for (r = group; r < group + 8; r++)
{
ULONGEST tmp;
- frame_read_unsigned_register (frame, r, &tmp);
+ tmp = get_frame_register_unsigned (frame, r);
fprintf_filtered (file, " %04lx", (long) tmp);
}
fprintf_filtered (file, "\n");
{
int i;
fprintf_filtered (file, " ");
- frame_read_register (frame, a, num);
+ get_frame_register (frame, a, num);
for (i = 0; i < register_size (gdbarch, a); i++)
{
fprintf_filtered (file, "%02x", (num[i] & 0xff));
}
static CORE_ADDR
-d10v_read_sp (void)
+d10v_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
- return (d10v_make_daddr (read_register (D10V_SP_REGNUM)));
+ ULONGEST sp;
+ frame_unwind_unsigned_register (next_frame, D10V_SP_REGNUM, &sp);
+ return d10v_make_daddr (sp);
}
/* When arguments must be pushed onto the stack, they go on in reverse
- order. The below implements a FILO (stack) to do this. */
+ order. The below implements a FILO (stack) to do this. */
struct stack_item
{
}
static CORE_ADDR
-d10v_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr,
+d10v_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
struct regcache *regcache, CORE_ADDR bp_addr,
- int nargs, struct value **args, CORE_ADDR sp, int struct_return,
- CORE_ADDR struct_addr)
+ int nargs, struct value **args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
int i;
int regnum = ARG1_REGNUM;
return sp;
}
-
-/* Given a return value in `regbuf' with a type `valtype',
- extract and copy its value into `valbuf'. */
-
-static void
-d10v_extract_return_value (struct type *type, struct regcache *regcache,
- void *valbuf)
-{
- int len;
- if (TYPE_LENGTH (type) == 1)
- {
- ULONGEST c;
- regcache_cooked_read_unsigned (regcache, RET1_REGNUM, &c);
- store_unsigned_integer (valbuf, 1, c);
- }
- else
- {
- /* For return values of odd size, the first byte is in the
- least significant part of the first register. The
- remaining bytes in remaining registers. Interestingly, when
- such values are passed in, the last byte is in the most
- significant byte of that same register - wierd. */
- int reg = RET1_REGNUM;
- int off = 0;
- if (TYPE_LENGTH (type) & 1)
- {
- regcache_cooked_read_part (regcache, RET1_REGNUM, 1, 1,
- (bfd_byte *)valbuf + off);
- off++;
- reg++;
- }
- /* Transfer the remaining registers. */
- for (; off < TYPE_LENGTH (type); reg++, off += 2)
- {
- regcache_cooked_read (regcache, RET1_REGNUM + reg,
- (bfd_byte *) valbuf + off);
- }
- }
-}
-
/* Translate a GDB virtual ADDR/LEN into a format the remote target
understands. Returns number of bytes that can be transfered
starting at TARG_ADDR. Return ZERO if no bytes can be transfered
(segmentation fault). Since the simulator knows all about how the
- VM system works, we just call that to do the translation. */
+ VM system works, we just call that to do the translation. */
static void
remote_d10v_translate_xfer_address (struct gdbarch *gdbarch,
}
}
- printf_filtered ("Dump of trace from %s to %s:\n", paddr_u (low), paddr_u (high));
+ printf_filtered ("Dump of trace from %s to %s:\n",
+ paddr_u (low), paddr_u (high));
display_trace (low, high);
/* The FUNC is easy. */
func = frame_func_unwind (next_frame);
- /* This is meant to halt the backtrace at "_start". Make sure we
- don't halt it at a generic dummy frame. */
- if (func <= IMEM_START || inside_entry_file (func))
- return;
-
/* Hopefully the prologue analysis either correctly determined the
frame's base (which is the SP from the previous frame), or set
that base to "NULL". */
id = frame_id_build (base, func);
- /* Check that we're not going round in circles with the same frame
- ID (but avoid applying the test to sentinel frames which do go
- round in circles). Can't use frame_id_eq() as that doesn't yet
- compare the frame's PC value. */
- if (frame_relative_level (next_frame) >= 0
- && get_frame_type (next_frame) != DUMMY_FRAME
- && frame_id_eq (get_frame_id (next_frame), id))
- return;
-
(*this_id) = id;
}
-static void
-saved_regs_unwinder (struct frame_info *next_frame,
- CORE_ADDR *this_saved_regs,
- int regnum, int *optimizedp,
- enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnump, void *bufferp)
-{
- struct gdbarch *gdbarch = get_frame_arch (next_frame);
- if (this_saved_regs[regnum] != 0)
- {
- if (regnum == D10V_SP_REGNUM)
- {
- /* SP register treated specially. */
- *optimizedp = 0;
- *lvalp = not_lval;
- *addrp = 0;
- *realnump = -1;
- if (bufferp != NULL)
- store_unsigned_integer (bufferp,
- register_size (gdbarch, regnum),
- this_saved_regs[regnum]);
- }
- else
- {
- /* Any other register is saved in memory, fetch it but cache
- a local copy of its value. */
- *optimizedp = 0;
- *lvalp = lval_memory;
- *addrp = this_saved_regs[regnum];
- *realnump = -1;
- if (bufferp != NULL)
- {
- /* Read the value in from memory. */
- get_frame_memory (next_frame, this_saved_regs[regnum], bufferp,
- register_size (gdbarch, regnum));
- }
- }
- return;
- }
-
- /* No luck, assume this and the next frame have the same register
- value. If a value is needed, pass the request on down the chain;
- otherwise just return an indication that the value is in the same
- register as the next frame. */
- frame_register_unwind (next_frame, regnum, optimizedp, lvalp, addrp,
- realnump, bufferp);
-}
-
-
static void
d10v_frame_prev_register (struct frame_info *next_frame,
void **this_prologue_cache,
{
struct d10v_unwind_cache *info
= d10v_frame_unwind_cache (next_frame, this_prologue_cache);
- if (regnum == D10V_PC_REGNUM)
- {
- /* The call instruction saves the caller's PC in LR. The
- function prologue of the callee may then save the LR on the
- stack. Find that possibly saved LR value and return it. */
- saved_regs_unwinder (next_frame, info->saved_regs, LR_REGNUM, optimizedp,
- lvalp, addrp, realnump, bufferp);
- }
- else
- {
- saved_regs_unwinder (next_frame, info->saved_regs, regnum, optimizedp,
- lvalp, addrp, realnump, bufferp);
- }
+ trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, bufferp);
}
static const struct frame_unwind d10v_frame_unwind = {
d10v_frame_prev_register
};
-const struct frame_unwind *
-d10v_frame_p (CORE_ADDR pc)
+static const struct frame_unwind *
+d10v_frame_sniffer (struct frame_info *next_frame)
{
return &d10v_frame_unwind;
}
static struct frame_id
d10v_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
- ULONGEST base;
- frame_unwind_unsigned_register (next_frame, D10V_SP_REGNUM, &base);
- return frame_id_build (d10v_make_daddr (base), frame_pc_unwind (next_frame));
+ return frame_id_build (d10v_unwind_sp (gdbarch, next_frame),
+ frame_pc_unwind (next_frame));
}
static gdbarch_init_ftype d10v_gdbarch_init;
gdbarch_register_name_ftype *d10v_register_name;
gdbarch_register_sim_regno_ftype *d10v_register_sim_regno;
- /* Find a candidate among the list of pre-declared architectures. */
+ /* Find a candidate among the list of pre-declared architectures. */
arches = gdbarch_list_lookup_by_info (arches, &info);
if (arches != NULL)
return arches->gdbarch;
/* None found, create a new architecture from the information
- provided. */
+ provided. */
tdep = XMALLOC (struct gdbarch_tdep);
gdbarch = gdbarch_alloc (&info, tdep);
set_gdbarch_read_pc (gdbarch, d10v_read_pc);
set_gdbarch_write_pc (gdbarch, d10v_write_pc);
- set_gdbarch_read_sp (gdbarch, d10v_read_sp);
+ set_gdbarch_unwind_sp (gdbarch, d10v_unwind_sp);
set_gdbarch_num_regs (gdbarch, d10v_num_regs);
set_gdbarch_sp_regnum (gdbarch, D10V_SP_REGNUM);
set_gdbarch_long_bit (gdbarch, 4 * TARGET_CHAR_BIT);
set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT);
/* NOTE: The d10v as a 32 bit ``float'' and ``double''. ``long
- double'' is 64 bits. */
+ double'' is 64 bits. */
set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT);
set_gdbarch_double_bit (gdbarch, 4 * TARGET_CHAR_BIT);
set_gdbarch_long_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
case BFD_ENDIAN_LITTLE:
set_gdbarch_float_format (gdbarch, &floatformat_ieee_single_little);
set_gdbarch_double_format (gdbarch, &floatformat_ieee_single_little);
- set_gdbarch_long_double_format (gdbarch, &floatformat_ieee_double_little);
+ set_gdbarch_long_double_format (gdbarch,
+ &floatformat_ieee_double_little);
break;
default:
internal_error (__FILE__, __LINE__,
"d10v_gdbarch_init: bad byte order for float format");
}
- set_gdbarch_extract_return_value (gdbarch, d10v_extract_return_value);
+ set_gdbarch_return_value (gdbarch, d10v_return_value);
set_gdbarch_push_dummy_code (gdbarch, d10v_push_dummy_code);
set_gdbarch_push_dummy_call (gdbarch, d10v_push_dummy_call);
- set_gdbarch_store_return_value (gdbarch, d10v_store_return_value);
- set_gdbarch_extract_struct_value_address (gdbarch, d10v_extract_struct_value_address);
- set_gdbarch_use_struct_convention (gdbarch, d10v_use_struct_convention);
set_gdbarch_skip_prologue (gdbarch, d10v_skip_prologue);
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
set_gdbarch_decr_pc_after_break (gdbarch, 4);
- set_gdbarch_function_start_offset (gdbarch, 0);
set_gdbarch_breakpoint_from_pc (gdbarch, d10v_breakpoint_from_pc);
- set_gdbarch_remote_translate_xfer_address (gdbarch, remote_d10v_translate_xfer_address);
-
- set_gdbarch_frame_args_skip (gdbarch, 0);
- set_gdbarch_frameless_function_invocation (gdbarch, frameless_look_for_prologue);
+ set_gdbarch_remote_translate_xfer_address (gdbarch,
+ remote_d10v_translate_xfer_address);
- set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
set_gdbarch_frame_align (gdbarch, d10v_frame_align);
set_gdbarch_register_sim_regno (gdbarch, d10v_register_sim_regno);
set_gdbarch_print_registers_info (gdbarch, d10v_print_registers_info);
- frame_unwind_append_predicate (gdbarch, d10v_frame_p);
+ frame_unwind_append_sniffer (gdbarch, d10v_frame_sniffer);
frame_base_set_default (gdbarch, &d10v_frame_base);
- /* Methods for saving / extracting a dummy frame's ID. */
+ /* Methods for saving / extracting a dummy frame's ID. The ID's
+ stack address must match the SP value returned by
+ PUSH_DUMMY_CALL, and saved by generic_save_dummy_frame_tos. */
set_gdbarch_unwind_dummy_id (gdbarch, d10v_unwind_dummy_id);
- set_gdbarch_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos);
/* Return the unwound PC value. */
set_gdbarch_unwind_pc (gdbarch, d10v_unwind_pc);
{
register_gdbarch_init (bfd_arch_d10v, d10v_gdbarch_init);
- target_resume_hook = d10v_eva_prepare_to_trace;
- target_wait_loop_hook = d10v_eva_get_trace_data;
+ deprecated_target_resume_hook = d10v_eva_prepare_to_trace;
+ deprecated_target_wait_loop_hook = d10v_eva_get_trace_data;
- deprecate_cmd (add_com ("regs", class_vars, show_regs, "Print all registers"),
+ deprecate_cmd (add_com ("regs", class_vars, show_regs,
+ "Print all registers"),
"info registers");
add_com ("itrace", class_support, trace_command,
add_info ("itrace", trace_info,
"Display info about the trace data buffer.");
- add_setshow_boolean_cmd ("itracedisplay", no_class, &trace_display,
- "Set automatic display of trace.\n",
- "Show automatic display of trace.\n",
+ add_setshow_boolean_cmd ("itracedisplay", no_class, &trace_display, "\
+Set automatic display of trace.", "\
+Show automatic display of trace.", "\
+Controls the display of d10v specific instruction trace information.", "\
+Automatic display of trace is %s.",
NULL, NULL, &setlist, &showlist);
add_setshow_boolean_cmd ("itracesource", no_class,
- &default_trace_show_source,
- "Set display of source code with trace.\n",
- "Show display of source code with trace.\n",
+ &default_trace_show_source, "\
+Set display of source code with trace.", "\
+Show display of source code with trace.", "\
+When on source code is included in the d10v instruction trace display.", "\
+Display of source code with trace is %s.",
NULL, NULL, &setlist, &showlist);
}