/* Read dbx symbol tables and convert to internal format, for GDB.
- Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
+ Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
/* This module provides three functions: dbx_symfile_init,
which initializes to read a symbol file; dbx_new_init, which
for real. dbx_psymtab_to_symtab() is the function that does this */
#include "defs.h"
-#include <string.h>
+#include "gdb_string.h"
#if defined(USG) || defined(__CYGNUSCLIB__)
#include <sys/types.h>
#include <fcntl.h>
-#define L_SET 0
-#define L_INCR 1
#endif
-#include <obstack.h>
-#include <sys/param.h>
-#ifndef NO_SYS_FILE
-#include <sys/file.h>
-#endif
-#include <sys/stat.h>
+#include "obstack.h"
+#include "gdb_stat.h"
#include <ctype.h>
#include "symtab.h"
#include "breakpoint.h"
#include "command.h"
#include "target.h"
#include "gdbcore.h" /* for bfd stuff */
-#include "libbfd.h" /* FIXME Secret internal BFD stuff (bfd_read) */
#include "libaout.h" /* FIXME Secret internal BFD stuff for a.out */
#include "symfile.h"
#include "objfiles.h"
#include "aout/aout64.h"
#include "aout/stab_gnu.h" /* We always use GNU stabs, not native, now */
-/* Each partial symbol table entry contains a pointer to private data for the
- read_symtab() function to use when expanding a partial symbol table entry
- to a full symbol table entry.
+\f
+/* This macro returns the size field of a minimal symbol, which is normally
+ stored in the "info" field. The macro can be overridden for specific
+ targets (e.g. MIPS16) that use the info field for other purposes. */
+#ifndef MSYMBOL_SIZE
+#define MSYMBOL_SIZE(msym) ((long) MSYMBOL_INFO (msym))
+#endif
- For dbxread this structure contains the offset within the file symbol table
- of first local symbol for this file, and length (in bytes) of the section
- of the symbol table devoted to this file's symbols (actually, the section
- bracketed may contain more than just this file's symbols). It also contains
- further information needed to locate the symbols if they are in an ELF file.
- If ldsymlen is 0, the only reason for this thing's existence is the
- dependency list. Nothing else will happen when it is read in. */
-
-#define LDSYMOFF(p) (((struct symloc *)((p)->read_symtab_private))->ldsymoff)
-#define LDSYMLEN(p) (((struct symloc *)((p)->read_symtab_private))->ldsymlen)
-#define SYMLOC(p) ((struct symloc *)((p)->read_symtab_private))
-#define SYMBOL_SIZE(p) (SYMLOC(p)->symbol_size)
-#define SYMBOL_OFFSET(p) (SYMLOC(p)->symbol_offset)
-#define STRING_OFFSET(p) (SYMLOC(p)->string_offset)
-#define FILE_STRING_OFFSET(p) (SYMLOC(p)->file_string_offset)
+/* We put a pointer to this structure in the read_symtab_private field
+ of the psymtab. */
struct symloc {
+
+ /* Offset within the file symbol table of first local symbol for this
+ file. */
+
int ldsymoff;
+
+ /* Length (in bytes) of the section of the symbol table devoted to
+ this file's symbols (actually, the section bracketed may contain
+ more than just this file's symbols). If ldsymlen is 0, the only
+ reason for this thing's existence is the dependency list. Nothing
+ else will happen when it is read in. */
+
int ldsymlen;
+
+ /* The size of each symbol in the symbol file (in external form). */
+
int symbol_size;
+
+ /* Further information needed to locate the symbols if they are in
+ an ELF file. */
+
int symbol_offset;
int string_offset;
int file_string_offset;
};
+#define LDSYMOFF(p) (((struct symloc *)((p)->read_symtab_private))->ldsymoff)
+#define LDSYMLEN(p) (((struct symloc *)((p)->read_symtab_private))->ldsymlen)
+#define SYMLOC(p) ((struct symloc *)((p)->read_symtab_private))
+#define SYMBOL_SIZE(p) (SYMLOC(p)->symbol_size)
+#define SYMBOL_OFFSET(p) (SYMLOC(p)->symbol_offset)
+#define STRING_OFFSET(p) (SYMLOC(p)->string_offset)
+#define FILE_STRING_OFFSET(p) (SYMLOC(p)->file_string_offset)
+
+\f
/* Macro to determine which symbols to ignore when reading the first symbol
of a file. Some machines override this definition. */
#ifndef IGNORE_SYMBOL
#define IGNORE_SYMBOL(type) (type == (int)N_NSYMS)
#endif
-/* Macro for name of symbol to indicate a file compiled with gcc. */
-#ifndef GCC_COMPILED_FLAG_SYMBOL
-#define GCC_COMPILED_FLAG_SYMBOL "gcc_compiled."
-#endif
-
-/* Macro for name of symbol to indicate a file compiled with gcc2. */
-#ifndef GCC2_COMPILED_FLAG_SYMBOL
-#define GCC2_COMPILED_FLAG_SYMBOL "gcc2_compiled."
-#endif
-
-/* Define this as 1 if a pcc declaration of a char or short argument
- gives the correct address. Otherwise assume pcc gives the
- address of the corresponding int, which is not the same on a
- big-endian machine. */
-
-#ifndef BELIEVE_PCC_PROMOTION
-#define BELIEVE_PCC_PROMOTION 0
-#endif
-
/* Remember what we deduced to be the source language of this psymtab. */
static enum language psymtab_language = language_unknown;
static unsigned int file_string_table_offset;
static unsigned int next_file_string_table_offset;
+/* .o and NLM files contain unrelocated addresses which are based at 0. When
+ non-zero, this flag disables some of the special cases for Solaris elf+stab
+ text addresses at location 0. */
+
+static int symfile_relocatable = 0;
+
+ /* If this is nonzero, N_LBRAC, N_RBRAC, and N_SLINE entries are relative
+ to the function start address. */
+
+static int block_address_function_relative = 0;
+\f
+/* The lowest text address we have yet encountered. This is needed
+ because in an a.out file, there is no header field which tells us
+ what address the program is actually going to be loaded at, so we
+ need to make guesses based on the symbols (which *are* relocated to
+ reflect the address it will be loaded at). */
+static CORE_ADDR lowest_text_address;
+
+/* Non-zero if there is any line number info in the objfile. Prevents
+ end_psymtab from discarding an otherwise empty psymtab. */
+
+static int has_line_numbers;
+
/* Complaints about the symbols we have encountered. */
struct complaint lbrac_complaint =
{"unknown symbol type %s", 0, 0};
struct complaint unknown_symchar_complaint =
- {"unknown symbol type character `%c'", 0, 0};
+ {"unknown symbol descriptor `%c'", 0, 0};
struct complaint lbrac_rbrac_complaint =
{"block start larger than block end", 0, 0};
{"N_LBRAC/N_RBRAC symbol mismatch at symtab pos %d", 0, 0};
struct complaint repeated_header_complaint =
- {"\"repeated\" header file not previously seen, at symtab pos %d", 0, 0};
+ {"\"repeated\" header file %s not previously seen, at symtab pos %d", 0, 0};
-struct complaint repeated_header_name_complaint =
- {"\"repeated\" header file not previously seen, named %s", 0, 0};
+struct complaint unclaimed_bincl_complaint =
+ {"N_BINCL %s not in entries for any file, at symtab pos %d", 0, 0};
\f
/* During initial symbol readin, we need to have a structure to keep
track of which psymtabs have which bincls in them. This structure
/* Local function prototypes */
+static void
+process_now PARAMS ((struct objfile *));
+
static void
free_header_files PARAMS ((void));
static void
init_header_files PARAMS ((void));
-static struct pending *
-copy_pending PARAMS ((struct pending *, int, struct pending *));
-
-static struct symtab *
-read_ofile_symtab PARAMS ((struct objfile *, int, int, CORE_ADDR, int,
- struct section_offsets *));
+static void
+read_ofile_symtab PARAMS ((struct partial_symtab *));
static void
dbx_psymtab_to_symtab PARAMS ((struct partial_symtab *));
static void
dbx_psymtab_to_symtab_1 PARAMS ((struct partial_symtab *));
+static void
+read_dbx_dynamic_symtab PARAMS ((struct section_offsets *,
+ struct objfile *objfile));
+
static void
read_dbx_symtab PARAMS ((struct section_offsets *, struct objfile *,
CORE_ADDR, int));
static void
init_bincl_list PARAMS ((int, struct objfile *));
-static void
-init_psymbol_list PARAMS ((struct objfile *));
-
static char *
-dbx_next_symbol_text PARAMS ((void));
+dbx_next_symbol_text PARAMS ((struct objfile *));
static void
fill_symbuf PARAMS ((bfd *));
static void
free_header_files ()
{
- register int i;
-
- if (header_files != NULL)
- {
- for (i = 0; i < n_header_files; i++)
- {
- free (header_files[i].name);
- }
- free ((PTR)header_files);
- header_files = NULL;
- n_header_files = 0;
- }
if (this_object_header_files)
{
free ((PTR)this_object_header_files);
this_object_header_files = NULL;
}
- n_allocated_header_files = 0;
n_allocated_this_object_header_files = 0;
}
static void
init_header_files ()
{
- n_header_files = 0;
- n_allocated_header_files = 10;
- header_files = (struct header_file *)
- xmalloc (10 * sizeof (struct header_file));
-
n_allocated_this_object_header_files = 10;
this_object_header_files = (int *) xmalloc (10 * sizeof (int));
}
char *name;
int instance;
{
- register struct header_file *p = header_files;
+ register struct header_file *p = HEADER_FILES (current_objfile);
register int i;
- for (i = 0; i < n_header_files; i++)
+ for (i = 0; i < N_HEADER_FILES (current_objfile); i++)
if (STREQ (p[i].name, name) && instance == p[i].instance)
{
add_this_object_header_file (i);
return;
}
- complain (&repeated_header_complaint, symnum);
- complain (&repeated_header_name_complaint, name);
+ complain (&repeated_header_complaint, name, symnum);
}
/* Add to this file a "new" header file: definitions for its types follow.
int instance;
{
register int i;
+ register struct header_file *hfile;
/* Make sure there is room for one more header file. */
- if (n_header_files == n_allocated_header_files)
+ i = N_ALLOCATED_HEADER_FILES (current_objfile);
+
+ if (N_HEADER_FILES (current_objfile) == i)
{
- n_allocated_header_files *= 2;
- header_files = (struct header_file *)
- xrealloc ((char *) header_files,
- (n_allocated_header_files * sizeof (struct header_file)));
+ if (i == 0)
+ {
+ N_ALLOCATED_HEADER_FILES (current_objfile) = 10;
+ HEADER_FILES (current_objfile) = (struct header_file *)
+ xmalloc (10 * sizeof (struct header_file));
+ }
+ else
+ {
+ i *= 2;
+ N_ALLOCATED_HEADER_FILES (current_objfile) = i;
+ HEADER_FILES (current_objfile) = (struct header_file *)
+ xrealloc ((char *) HEADER_FILES (current_objfile),
+ (i * sizeof (struct header_file)));
+ }
}
/* Create an entry for this header file. */
- i = n_header_files++;
- header_files[i].name = savestring (name, strlen(name));
- header_files[i].instance = instance;
- header_files[i].length = 10;
- header_files[i].vector
+ i = N_HEADER_FILES (current_objfile)++;
+ hfile = HEADER_FILES (current_objfile) + i;
+ hfile->name = savestring (name, strlen(name));
+ hfile->instance = instance;
+ hfile->length = 10;
+ hfile->vector
= (struct type **) xmalloc (10 * sizeof (struct type *));
- memset (header_files[i].vector, 0, 10 * sizeof (struct type *));
+ memset (hfile->vector, 0, 10 * sizeof (struct type *));
add_this_object_header_file (i);
}
explicit_lookup_type (real_filenum, index)
int real_filenum, index;
{
- register struct header_file *f = &header_files[real_filenum];
+ register struct header_file *f = &HEADER_FILES (current_objfile)[real_filenum];
if (index >= f->length)
{
f->length *= 2;
f->vector = (struct type **)
xrealloc (f->vector, f->length * sizeof (struct type *));
- bzero (&f->vector[f->length / 2],
- f->length * sizeof (struct type *) / 2);
+ memset (&f->vector[f->length / 2],
+ '\0', f->length * sizeof (struct type *) / 2);
}
return &f->vector[index];
}
struct objfile *objfile;
{
enum minimal_symbol_type ms_type;
+ int section;
+ asection *bfd_section;
- switch (type &~ N_EXT) {
- case N_TEXT: ms_type = mst_text; break;
- case N_DATA: ms_type = mst_data; break;
- case N_BSS: ms_type = mst_bss; break;
- case N_ABS: ms_type = mst_abs; break;
+ switch (type)
+ {
+ case N_TEXT | N_EXT:
+ ms_type = mst_text;
+ section = SECT_OFF_TEXT;
+ bfd_section = DBX_TEXT_SECTION (objfile);
+ break;
+ case N_DATA | N_EXT:
+ ms_type = mst_data;
+ section = SECT_OFF_DATA;
+ bfd_section = DBX_DATA_SECTION (objfile);
+ break;
+ case N_BSS | N_EXT:
+ ms_type = mst_bss;
+ section = SECT_OFF_BSS;
+ bfd_section = DBX_BSS_SECTION (objfile);
+ break;
+ case N_ABS | N_EXT:
+ ms_type = mst_abs;
+ section = -1;
+ bfd_section = NULL;
+ break;
#ifdef N_SETV
- case N_SETV: ms_type = mst_data; break;
+ case N_SETV | N_EXT:
+ ms_type = mst_data;
+ section = SECT_OFF_DATA;
+ bfd_section = DBX_DATA_SECTION (objfile);
+ break;
+ case N_SETV:
+ /* I don't think this type actually exists; since a N_SETV is the result
+ of going over many .o files, it doesn't make sense to have one
+ file local. */
+ ms_type = mst_file_data;
+ section = SECT_OFF_DATA;
+ bfd_section = DBX_DATA_SECTION (objfile);
+ break;
#endif
- default: ms_type = mst_unknown; break;
+ case N_TEXT:
+ case N_NBTEXT:
+ case N_FN:
+ case N_FN_SEQ:
+ ms_type = mst_file_text;
+ section = SECT_OFF_TEXT;
+ bfd_section = DBX_TEXT_SECTION (objfile);
+ break;
+ case N_DATA:
+ ms_type = mst_file_data;
+
+ /* Check for __DYNAMIC, which is used by Sun shared libraries.
+ Record it as global even if it's local, not global, so
+ lookup_minimal_symbol can find it. We don't check symbol_leading_char
+ because for SunOS4 it always is '_'. */
+ if (name[8] == 'C' && STREQ ("__DYNAMIC", name))
+ ms_type = mst_data;
+
+ /* Same with virtual function tables, both global and static. */
+ {
+ char *tempstring = name;
+ if (tempstring[0] == bfd_get_symbol_leading_char (objfile->obfd))
+ ++tempstring;
+ if (VTBL_PREFIX_P ((tempstring)))
+ ms_type = mst_data;
+ }
+ section = SECT_OFF_DATA;
+ bfd_section = DBX_DATA_SECTION (objfile);
+ break;
+ case N_BSS:
+ ms_type = mst_file_bss;
+ section = SECT_OFF_BSS;
+ bfd_section = DBX_BSS_SECTION (objfile);
+ break;
+ default:
+ ms_type = mst_unknown;
+ section = -1;
+ bfd_section = NULL;
+ break;
}
- prim_record_minimal_symbol (obsavestring (name, strlen (name), &objfile -> symbol_obstack),
- address, ms_type);
+ if ((ms_type == mst_file_text || ms_type == mst_text)
+ && address < lowest_text_address)
+ lowest_text_address = address;
+
+ prim_record_minimal_symbol_and_info
+ (name, address, ms_type, NULL, section, bfd_section, objfile);
}
\f
/* Scan and build partial symbols for a symbol file.
{
bfd *sym_bfd;
int val;
+ struct cleanup *back_to;
+
+ val = strlen (objfile->name);
sym_bfd = objfile->obfd;
- val = bfd_seek (objfile->obfd, DBX_SYMTAB_OFFSET (objfile), L_SET);
+
+ /* .o and .nlm files are relocatables with text, data and bss segs based at
+ 0. This flag disables special (Solaris stabs-in-elf only) fixups for
+ symbols with a value of 0. */
+
+ symfile_relocatable = bfd_get_file_flags (sym_bfd) & HAS_RELOC;
+
+ /* This is true for Solaris (and all other systems which put stabs
+ in sections, hopefully, since it would be silly to do things
+ differently from Solaris), and false for SunOS4 and other a.out
+ file formats. */
+ block_address_function_relative =
+ ((0 == strncmp (bfd_get_target (sym_bfd), "elf", 3))
+ || (0 == strncmp (bfd_get_target (sym_bfd), "som", 3))
+ || (0 == strncmp (bfd_get_target (sym_bfd), "coff", 4))
+ || (0 == strncmp (bfd_get_target (sym_bfd), "pe", 2))
+ || (0 == strncmp (bfd_get_target (sym_bfd), "nlm", 3)));
+
+ val = bfd_seek (sym_bfd, DBX_SYMTAB_OFFSET (objfile), SEEK_SET);
if (val < 0)
perror_with_name (objfile->name);
/* If we are reinitializing, or if we have never loaded syms yet, init */
- if (mainline || objfile->global_psymbols.size == 0 || objfile->static_psymbols.size == 0)
- init_psymbol_list (objfile);
+ if (mainline
+ || objfile->global_psymbols.size == 0
+ || objfile->static_psymbols.size == 0)
+ init_psymbol_list (objfile, DBX_SYMCOUNT (objfile));
symbol_size = DBX_SYMBOL_SIZE (objfile);
symbol_table_offset = DBX_SYMTAB_OFFSET (objfile);
- pending_blocks = 0;
- make_cleanup (really_free_pendings, 0);
+ free_pending_blocks ();
+ back_to = make_cleanup (really_free_pendings, 0);
init_minimal_symbol_collection ();
make_cleanup (discard_minimal_symbols, 0);
process them and define symbols accordingly. */
read_dbx_symtab (section_offsets, objfile,
- bfd_section_vma (sym_bfd, DBX_TEXT_SECT (objfile)),
- bfd_section_size (sym_bfd, DBX_TEXT_SECT (objfile)));
+ DBX_TEXT_ADDR (objfile),
+ DBX_TEXT_SIZE (objfile));
+
+ /* Add the dynamic symbols. */
+
+ read_dbx_dynamic_symtab (section_offsets, objfile);
/* Install any minimal symbols that have been collected as the current
minimal symbols for this objfile. */
install_minimal_symbols (objfile);
- if (!have_partial_symbols ()) {
- wrap_here ("");
- printf_filtered ("(no debugging symbols found)...");
- wrap_here ("");
- }
+ do_cleanups (back_to);
}
/* Initialize anything that needs initializing when a completely new
int val;
bfd *sym_bfd = objfile->obfd;
char *name = bfd_get_filename (sym_bfd);
+ asection *text_sect;
unsigned char size_temp[DBX_STRINGTAB_SIZE_SIZE];
/* Allocate struct to keep track of the symfile */
- objfile->sym_private = (PTR)
+ objfile->sym_stab_info = (PTR)
xmmalloc (objfile -> md, sizeof (struct dbx_symfile_info));
+ memset ((PTR) objfile->sym_stab_info, 0, sizeof (struct dbx_symfile_info));
+
+ DBX_TEXT_SECTION (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
+ DBX_DATA_SECTION (objfile) = bfd_get_section_by_name (sym_bfd, ".data");
+ DBX_BSS_SECTION (objfile) = bfd_get_section_by_name (sym_bfd, ".bss");
/* FIXME POKING INSIDE BFD DATA STRUCTURES */
#define STRING_TABLE_OFFSET (sym_bfd->origin + obj_str_filepos (sym_bfd))
/* FIXME POKING INSIDE BFD DATA STRUCTURES */
DBX_SYMFILE_INFO (objfile)->stab_section_info = NULL;
- DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
- if (!DBX_TEXT_SECT (objfile))
+
+ text_sect = bfd_get_section_by_name (sym_bfd, ".text");
+ if (!text_sect)
error ("Can't find .text section in symbol file");
+ DBX_TEXT_ADDR (objfile) = bfd_section_vma (sym_bfd, text_sect);
+ DBX_TEXT_SIZE (objfile) = bfd_section_size (sym_bfd, text_sect);
DBX_SYMBOL_SIZE (objfile) = obj_symbol_entry_size (sym_bfd);
DBX_SYMCOUNT (objfile) = bfd_get_symcount (sym_bfd);
}
else
{
- val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, L_SET);
+ val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, SEEK_SET);
if (val < 0)
perror_with_name (name);
DBX_STRINGTAB (objfile) =
(char *) obstack_alloc (&objfile -> psymbol_obstack,
DBX_STRINGTAB_SIZE (objfile));
+ OBJSTAT (objfile, sz_strtab += DBX_STRINGTAB_SIZE (objfile));
/* Now read in the string table in one big gulp. */
- val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, L_SET);
+ val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, SEEK_SET);
if (val < 0)
perror_with_name (name);
val = bfd_read (DBX_STRINGTAB (objfile), DBX_STRINGTAB_SIZE (objfile), 1,
dbx_symfile_finish (objfile)
struct objfile *objfile;
{
- if (objfile->sym_private != NULL)
+ if (objfile->sym_stab_info != NULL)
{
- mfree (objfile -> md, objfile->sym_private);
+ if (HEADER_FILES (objfile) != NULL)
+ {
+ register int i = N_HEADER_FILES (objfile);
+ register struct header_file *hfiles = HEADER_FILES (objfile);
+
+ while (--i >= 0)
+ {
+ free (hfiles [i].name);
+ free (hfiles [i].vector);
+ }
+ free ((PTR) hfiles);
+ }
+ mfree (objfile -> md, objfile->sym_stab_info);
}
free_header_files ();
}
\f
/* Buffer for reading the symbol table entries. */
-static struct internal_nlist symbuf[4096];
+static struct external_nlist symbuf[4096];
static int symbuf_idx;
static int symbuf_end;
+/* cont_elem is used for continuing information in cfront.
+ It saves information about which types need to be fixed up and
+ completed after all the stabs are read. */
+struct cont_elem
+ {
+ /* sym and stabsstring for continuing information in cfront */
+ struct symbol * sym;
+ char * stabs;
+ /* state dependancies (statics that must be preserved) */
+ int sym_idx;
+ int sym_end;
+ int symnum;
+ int (*func) PARAMS ((struct objfile *, struct symbol *, char *));
+ /* other state dependancies include:
+ (assumption is that these will not change since process_now FIXME!!)
+ stringtab_global
+ n_stabs
+ objfile
+ symfile_bfd */
+};
+
+static struct cont_elem *cont_list = 0;
+static int cont_limit = 0;
+static int cont_count = 0;
+
+/* Arrange for function F to be called with arguments SYM and P later
+ in the stabs reading process. */
+void
+process_later (sym, p, f)
+ struct symbol *sym;
+ char *p;
+ int (*f) PARAMS ((struct objfile *, struct symbol *, char *));
+{
+
+ /* Allocate more space for the deferred list. */
+ if (cont_count >= cont_limit - 1)
+ {
+ cont_limit += 32; /* chunk size */
+
+ cont_list
+ = (struct cont_elem *) xrealloc (cont_list,
+ (cont_limit
+ * sizeof (struct cont_elem)));
+ if (!cont_list)
+ error ("Virtual memory exhausted\n");
+ }
+
+ /* Save state variables so we can process these stabs later. */
+ cont_list[cont_count].sym_idx = symbuf_idx;
+ cont_list[cont_count].sym_end = symbuf_end;
+ cont_list[cont_count].symnum = symnum;
+ cont_list[cont_count].sym = sym;
+ cont_list[cont_count].stabs = p;
+ cont_list[cont_count].func = f;
+ cont_count++;
+}
+
+/* Call deferred funtions in CONT_LIST. */
+
+static void
+process_now (objfile)
+ struct objfile *objfile;
+{
+ int i;
+ int save_symbuf_idx;
+ int save_symbuf_end;
+ int save_symnum;
+ struct symbol *sym;
+ char *stabs;
+ int err;
+ int (*func) PARAMS ((struct objfile *, struct symbol *, char *));
+
+ /* Save the state of our caller, we'll want to restore it before
+ returning. */
+ save_symbuf_idx = symbuf_idx;
+ save_symbuf_end = symbuf_end;
+ save_symnum = symnum;
+
+ /* Iterate over all the deferred stabs. */
+ for (i = 0; i < cont_count; i++)
+ {
+ /* Restore the state for this deferred stab. */
+ symbuf_idx = cont_list[i].sym_idx;
+ symbuf_end = cont_list[i].sym_end;
+ symnum = cont_list[i].symnum;
+ sym = cont_list[i].sym;
+ stabs = cont_list[i].stabs;
+ func = cont_list[i].func;
+
+ /* Call the function to handle this deferrd stab. */
+ err = (*func) (objfile, sym, stabs);
+ if (err)
+ error ("Internal error: unable to resolve stab.\n");
+ }
+
+ /* Restore our caller's state. */
+ symbuf_idx = save_symbuf_idx;
+ symbuf_end = save_symbuf_end;
+ symnum = save_symnum;
+ cont_count = 0;
+}
+
+
/* Name of last function encountered. Used in Solaris to approximate
object file boundaries. */
static char *last_function_name;
/* The address in memory of the string table of the object file we are
reading (which might not be the "main" object file, but might be a
- shared library or some other dynamically loaded thing). This is set
- by read_dbx_symtab when building psymtabs, and by read_ofile_symtab
- when building symtabs, and is used only by next_symbol_text. */
+ shared library or some other dynamically loaded thing). This is
+ set by read_dbx_symtab when building psymtabs, and by
+ read_ofile_symtab when building symtabs, and is used only by
+ next_symbol_text. FIXME: If that is true, we don't need it when
+ building psymtabs, right? */
static char *stringtab_global;
+/* These variables are used to control fill_symbuf when the stabs
+ symbols are not contiguous (as may be the case when a COFF file is
+ linked using --split-by-reloc). */
+static struct stab_section_list *symbuf_sections;
+static unsigned int symbuf_left;
+static unsigned int symbuf_read;
+
/* Refill the symbol table input buffer
and set the variables that control fetching entries from it.
Reports an error if no data available.
fill_symbuf (sym_bfd)
bfd *sym_bfd;
{
- int nbytes = bfd_read ((PTR)symbuf, sizeof (symbuf), 1, sym_bfd);
+ unsigned int count;
+ int nbytes;
+
+ if (symbuf_sections == NULL)
+ count = sizeof (symbuf);
+ else
+ {
+ if (symbuf_left <= 0)
+ {
+ file_ptr filepos = symbuf_sections->section->filepos;
+ if (bfd_seek (sym_bfd, filepos, SEEK_SET) != 0)
+ perror_with_name (bfd_get_filename (sym_bfd));
+ symbuf_left = bfd_section_size (sym_bfd, symbuf_sections->section);
+ symbol_table_offset = filepos - symbuf_read;
+ symbuf_sections = symbuf_sections->next;
+ }
+
+ count = symbuf_left;
+ if (count > sizeof (symbuf))
+ count = sizeof (symbuf);
+ }
+
+ nbytes = bfd_read ((PTR)symbuf, count, 1, sym_bfd);
if (nbytes < 0)
perror_with_name (bfd_get_filename (sym_bfd));
else if (nbytes == 0)
error ("Premature end of file reading symbol table");
symbuf_end = nbytes / symbol_size;
symbuf_idx = 0;
+ symbuf_left -= nbytes;
+ symbuf_read += nbytes;
}
#define SWAP_SYMBOL(symp, abfd) \
(unsigned char *)&(symp)->n_value); \
}
+#define INTERNALIZE_SYMBOL(intern, extern, abfd) \
+ { \
+ (intern).n_type = bfd_h_get_8 (abfd, (extern)->e_type); \
+ (intern).n_strx = bfd_h_get_32 (abfd, (extern)->e_strx); \
+ (intern).n_desc = bfd_h_get_16 (abfd, (extern)->e_desc); \
+ (intern).n_value = bfd_h_get_32 (abfd, (extern)->e_value); \
+ }
+
/* Invariant: The symbol pointed to by symbuf_idx is the first one
that hasn't been swapped. Swap the symbol at the same time
that symbuf_idx is incremented. */
call this function to get the continuation. */
static char *
-dbx_next_symbol_text ()
+dbx_next_symbol_text (objfile)
+ struct objfile *objfile;
{
+ struct internal_nlist nlist;
+
if (symbuf_idx == symbuf_end)
fill_symbuf (symfile_bfd);
+
symnum++;
- SWAP_SYMBOL(&symbuf[symbuf_idx], symfile_bfd);
- return symbuf[symbuf_idx++].n_strx + stringtab_global
- + file_string_table_offset;
-}
-\f
-/* Initializes storage for all of the partial symbols that will be
- created by read_dbx_symtab and subsidiaries. */
+ INTERNALIZE_SYMBOL(nlist, &symbuf[symbuf_idx], symfile_bfd);
+ OBJSTAT (objfile, n_stabs++);
-static void
-init_psymbol_list (objfile)
- struct objfile *objfile;
-{
- /* Free any previously allocated psymbol lists. */
- if (objfile -> global_psymbols.list)
- mfree (objfile -> md, (PTR)objfile -> global_psymbols.list);
- if (objfile -> static_psymbols.list)
- mfree (objfile -> md, (PTR)objfile -> static_psymbols.list);
-
- /* Current best guess is that there are approximately a twentieth
- of the total symbols (in a debugging file) are global or static
- oriented symbols */
- objfile -> global_psymbols.size = DBX_SYMCOUNT (objfile) / 10;
- objfile -> static_psymbols.size = DBX_SYMCOUNT (objfile) / 10;
- objfile -> global_psymbols.next = objfile -> global_psymbols.list = (struct partial_symbol *)
- xmmalloc (objfile -> md, objfile -> global_psymbols.size * sizeof (struct partial_symbol));
- objfile -> static_psymbols.next = objfile -> static_psymbols.list = (struct partial_symbol *)
- xmmalloc (objfile -> md, objfile -> static_psymbols.size * sizeof (struct partial_symbol));
-}
+ symbuf_idx++;
+ return nlist.n_strx + stringtab_global + file_string_table_offset;
+}
+\f
/* Initialize the list of bincls to contain none and have some
allocated. */
&& STREQ (name, bincl->name))
return bincl->pst;
+ complain (&repeated_header_complaint, name, symnum);
return (struct partial_symtab *) 0;
}
bincls_allocated = 0;
}
+/* Scan a SunOs dynamic symbol table for symbols of interest and
+ add them to the minimal symbol table. */
+
+static void
+read_dbx_dynamic_symtab (section_offsets, objfile)
+ struct section_offsets *section_offsets;
+ struct objfile *objfile;
+{
+ bfd *abfd = objfile->obfd;
+ struct cleanup *back_to;
+ int counter;
+ long dynsym_size;
+ long dynsym_count;
+ asymbol **dynsyms;
+ asymbol **symptr;
+ arelent **relptr;
+ long dynrel_size;
+ long dynrel_count;
+ arelent **dynrels;
+ CORE_ADDR sym_value;
+ char *name;
+
+ /* Check that the symbol file has dynamic symbols that we know about.
+ bfd_arch_unknown can happen if we are reading a sun3 symbol file
+ on a sun4 host (and vice versa) and bfd is not configured
+ --with-target=all. This would trigger an assertion in bfd/sunos.c,
+ so we ignore the dynamic symbols in this case. */
+ if (bfd_get_flavour (abfd) != bfd_target_aout_flavour
+ || (bfd_get_file_flags (abfd) & DYNAMIC) == 0
+ || bfd_get_arch (abfd) == bfd_arch_unknown)
+ return;
+
+ dynsym_size = bfd_get_dynamic_symtab_upper_bound (abfd);
+ if (dynsym_size < 0)
+ return;
+
+ dynsyms = (asymbol **) xmalloc (dynsym_size);
+ back_to = make_cleanup (free, dynsyms);
+
+ dynsym_count = bfd_canonicalize_dynamic_symtab (abfd, dynsyms);
+ if (dynsym_count < 0)
+ {
+ do_cleanups (back_to);
+ return;
+ }
+
+ /* Enter dynamic symbols into the minimal symbol table
+ if this is a stripped executable. */
+ if (bfd_get_symcount (abfd) <= 0)
+ {
+ symptr = dynsyms;
+ for (counter = 0; counter < dynsym_count; counter++, symptr++)
+ {
+ asymbol *sym = *symptr;
+ asection *sec;
+ int type;
+
+ sec = bfd_get_section (sym);
+
+ /* BFD symbols are section relative. */
+ sym_value = sym->value + sec->vma;
+
+ if (bfd_get_section_flags (abfd, sec) & SEC_CODE)
+ {
+ sym_value += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+ type = N_TEXT;
+ }
+ else if (bfd_get_section_flags (abfd, sec) & SEC_DATA)
+ {
+ sym_value += ANOFFSET (section_offsets, SECT_OFF_DATA);
+ type = N_DATA;
+ }
+ else if (bfd_get_section_flags (abfd, sec) & SEC_ALLOC)
+ {
+ sym_value += ANOFFSET (section_offsets, SECT_OFF_BSS);
+ type = N_BSS;
+ }
+ else
+ continue;
+
+ if (sym->flags & BSF_GLOBAL)
+ type |= N_EXT;
+
+ record_minimal_symbol ((char *) bfd_asymbol_name (sym), sym_value,
+ type, objfile);
+ }
+ }
+
+ /* Symbols from shared libraries have a dynamic relocation entry
+ that points to the associated slot in the procedure linkage table.
+ We make a mininal symbol table entry with type mst_solib_trampoline
+ at the address in the procedure linkage table. */
+ dynrel_size = bfd_get_dynamic_reloc_upper_bound (abfd);
+ if (dynrel_size < 0)
+ {
+ do_cleanups (back_to);
+ return;
+ }
+
+ dynrels = (arelent **) xmalloc (dynrel_size);
+ make_cleanup (free, dynrels);
+
+ dynrel_count = bfd_canonicalize_dynamic_reloc (abfd, dynrels, dynsyms);
+ if (dynrel_count < 0)
+ {
+ do_cleanups (back_to);
+ return;
+ }
+
+ for (counter = 0, relptr = dynrels;
+ counter < dynrel_count;
+ counter++, relptr++)
+ {
+ arelent *rel = *relptr;
+ CORE_ADDR address =
+ rel->address + ANOFFSET (section_offsets, SECT_OFF_DATA);
+
+ switch (bfd_get_arch (abfd))
+ {
+ case bfd_arch_sparc:
+ if (rel->howto->type != RELOC_JMP_SLOT)
+ continue;
+ break;
+ case bfd_arch_m68k:
+ /* `16' is the type BFD produces for a jump table relocation. */
+ if (rel->howto->type != 16)
+ continue;
+
+ /* Adjust address in the jump table to point to
+ the start of the bsr instruction. */
+ address -= 2;
+ break;
+ default:
+ continue;
+ }
+
+ name = (char *) bfd_asymbol_name (*rel->sym_ptr_ptr);
+ prim_record_minimal_symbol (name, address, mst_solib_trampoline,
+ objfile);
+ }
+
+ do_cleanups (back_to);
+}
+
/* Given pointers to an a.out symbol table in core containing dbx
style data, setup partial_symtab's describing each source file for
which debugging information is available.
CORE_ADDR text_addr;
int text_size;
{
- register struct internal_nlist *bufp = 0; /* =0 avoids gcc -Wall glitch */
+ register struct external_nlist *bufp = 0; /* =0 avoids gcc -Wall glitch */
+ struct internal_nlist nlist;
+
register char *namestring;
int nsl;
int past_first_source_file = 0;
CORE_ADDR last_o_file_start = 0;
- struct cleanup *old_chain;
+ CORE_ADDR last_function_start = 0;
+ struct cleanup *back_to;
bfd *abfd;
-
- /* End of the text segment of the executable file. */
- CORE_ADDR end_of_text_addr;
+ int textlow_not_set;
/* Current partial symtab */
struct partial_symtab *pst;
(struct partial_symtab **) alloca (dependencies_allocated *
sizeof (struct partial_symtab *));
- old_chain = make_cleanup (free_objfile, objfile);
-
/* Init bincl list */
init_bincl_list (20, objfile);
- make_cleanup (free_bincl_list, objfile);
+ back_to = make_cleanup (free_bincl_list, objfile);
last_source_file = NULL;
-#ifdef END_OF_TEXT_DEFAULT
- end_of_text_addr = END_OF_TEXT_DEFAULT;
-#else
- end_of_text_addr = text_addr + section_offsets->offsets[SECT_OFF_TEXT]
- + text_size; /* Relocate */
-#endif
+ lowest_text_address = (CORE_ADDR)-1;
symfile_bfd = objfile->obfd; /* For next_text_symbol */
abfd = objfile->obfd;
symbuf_end = symbuf_idx = 0;
next_symbol_text_func = dbx_next_symbol_text;
+ textlow_not_set = 1;
+ has_line_numbers = 0;
for (symnum = 0; symnum < DBX_SYMCOUNT (objfile); symnum++)
{
/*
* Special case to speed up readin.
*/
- if (bufp->n_type == (unsigned char)N_SLINE) continue;
+ if (bfd_h_get_8 (abfd, bufp->e_type) == N_SLINE)
+ {
+ has_line_numbers = 1;
+ continue;
+ }
- SWAP_SYMBOL (bufp, abfd);
+ INTERNALIZE_SYMBOL (nlist, bufp, abfd);
+ OBJSTAT (objfile, n_stabs++);
/* Ok. There is a lot of code duplicated in the rest of this
switch statement (for efficiency reasons). Since I don't
I've imbedded it in the following macro.
*/
-/* Set namestring based on bufp. If the string table index is invalid,
+/* Set namestring based on nlist. If the string table index is invalid,
give a fake name, and print a single error message per symbol file read,
rather than abort the symbol reading or flood the user with messages. */
/*FIXME: Too many adds and indirections in here for the inner loop. */
#define SET_NAMESTRING()\
- if (((unsigned)bufp->n_strx + file_string_table_offset) >= \
+ if (((unsigned)CUR_SYMBOL_STRX + file_string_table_offset) >= \
DBX_STRINGTAB_SIZE (objfile)) { \
complain (&string_table_offset_complaint, symnum); \
- namestring = "foo"; \
+ namestring = "<bad string table offset>"; \
} else \
- namestring = bufp->n_strx + file_string_table_offset + \
+ namestring = CUR_SYMBOL_STRX + file_string_table_offset + \
DBX_STRINGTAB (objfile)
-#define CUR_SYMBOL_TYPE bufp->n_type
-#define CUR_SYMBOL_VALUE bufp->n_value
+#define CUR_SYMBOL_TYPE nlist.n_type
+#define CUR_SYMBOL_VALUE nlist.n_value
+#define CUR_SYMBOL_STRX nlist.n_strx
#define DBXREAD_ONLY
#define START_PSYMTAB(ofile,secoff,fname,low,symoff,global_syms,static_syms)\
start_psymtab(ofile, secoff, fname, low, symoff, global_syms, static_syms)
-#define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps)\
- end_psymtab(pst,ilist,ninc,c_off,c_text,dep_list,n_deps)
+#define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps,textlow_not_set)\
+ end_psymtab(pst,ilist,ninc,c_off,c_text,dep_list,n_deps,textlow_not_set)
#include "partial-stab.h"
}
if (DBX_SYMCOUNT (objfile) > 0 /* We have some syms */
/*FIXME, does this have a bug at start address 0? */
&& last_o_file_start
- && objfile -> ei.entry_point < bufp->n_value
+ && objfile -> ei.entry_point < nlist.n_value
&& objfile -> ei.entry_point >= last_o_file_start)
{
objfile -> ei.entry_file_lowpc = last_o_file_start;
- objfile -> ei.entry_file_highpc = bufp->n_value;
+ objfile -> ei.entry_file_highpc = nlist.n_value;
}
if (pst)
{
end_psymtab (pst, psymtab_include_list, includes_used,
- symnum * symbol_size, end_of_text_addr,
- dependency_list, dependencies_used);
+ symnum * symbol_size,
+ (lowest_text_address == (CORE_ADDR)-1
+ ? (text_addr + section_offsets->offsets[SECT_OFF_TEXT])
+ : lowest_text_address)
+ + text_size,
+ dependency_list, dependencies_used, textlow_not_set);
}
- free_bincl_list (objfile);
- discard_cleanups (old_chain);
+ do_cleanups (back_to);
}
/* Allocate and partially fill a partial symtab. It will be
char *filename;
CORE_ADDR textlow;
int ldsymoff;
- struct partial_symbol *global_syms;
- struct partial_symbol *static_syms;
+ struct partial_symbol **global_syms;
+ struct partial_symbol **static_syms;
{
struct partial_symtab *result =
start_psymtab_common(objfile, section_offsets,
return result;
}
-/* Close off the current usage of a partial_symbol table entry. This
- involves setting the correct number of includes (with a realloc),
- setting the high text mark, setting the symbol length in the
- executable, and setting the length of the global and static lists
- of psymbols.
+/* Close off the current usage of PST.
+ Returns PST or NULL if the partial symtab was empty and thrown away.
- The global symbols and static symbols are then seperately sorted.
+ FIXME: List variables and peculiarities of same. */
- Then the partial symtab is put on the global list.
- *** List variables and peculiarities of same. ***
- */
-
-void
+struct partial_symtab *
end_psymtab (pst, include_list, num_includes, capping_symbol_offset,
- capping_text, dependency_list, number_dependencies)
+ capping_text, dependency_list, number_dependencies, textlow_not_set)
struct partial_symtab *pst;
char **include_list;
int num_includes;
CORE_ADDR capping_text;
struct partial_symtab **dependency_list;
int number_dependencies;
-/* struct partial_symbol *capping_global, *capping_static;*/
+ int textlow_not_set;
{
int i;
- struct partial_symtab *p1;
struct objfile *objfile = pst -> objfile;
if (capping_symbol_offset != -1)
- LDSYMLEN(pst) = capping_symbol_offset - LDSYMOFF(pst);
+ LDSYMLEN(pst) = capping_symbol_offset - LDSYMOFF(pst);
pst->texthigh = capping_text;
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
/* Under Solaris, the N_SO symbols always have a value of 0,
instead of the usual address of the .o file. Therefore,
we have to do some tricks to fill in texthigh and textlow.
The first trick is in partial-stab.h: if we see a static
or global function, and the textlow for the current pst
- is still 0, then we use that function's address for
- the textlow of the pst.
+ is not set (ie: textlow_not_set), then we use that function's
+ address for the textlow of the pst. */
- Now, to fill in texthigh, we remember the last function seen
+ /* Now, to fill in texthigh, we remember the last function seen
in the .o file (also in partial-stab.h). Also, there's a hack in
bfd/elf.c and gdb/elfread.c to pass the ELF st_size field
to here via the misc_info field. Therefore, we can fill in
a reliable texthigh by taking the address plus size of the
- last function in the file.
-
- Unfortunately, that does not cover the case where the last function
- in the file is static. See the paragraph below for more comments
- on this situation.
-
- Finally, if we have a valid textlow for the current file, we run
- down the partial_symtab_list filling in previous texthighs that
- are still unknown. */
-
- if (pst->texthigh == 0 && last_function_name) {
- char *p;
- int n;
- struct minimal_symbol *minsym;
-
- p = strchr (last_function_name, ':');
- if (p == NULL)
- p = last_function_name;
- n = p - last_function_name;
- p = alloca (n + 1);
- strncpy (p, last_function_name, n);
- p[n] = 0;
+ last function in the file. */
+
+ if (pst->texthigh == 0 && last_function_name)
+ {
+ char *p;
+ int n;
+ struct minimal_symbol *minsym;
+
+ p = strchr (last_function_name, ':');
+ if (p == NULL)
+ p = last_function_name;
+ n = p - last_function_name;
+ p = alloca (n + 1);
+ strncpy (p, last_function_name, n);
+ p[n] = 0;
- minsym = lookup_minimal_symbol (p, objfile);
-
- if (minsym) {
- pst->texthigh = SYMBOL_VALUE_ADDRESS (minsym) +
- (int) MSYMBOL_INFO (minsym);
- } else {
- /* This file ends with a static function, and it's
- difficult to imagine how hard it would be to track down
- the elf symbol. Luckily, most of the time no one will notice,
- since the next file will likely be compiled with -g, so
- the code below will copy the first fuction's start address
- back to our texthigh variable. (Also, if this file is the
- last one in a dynamically linked program, texthigh already
- has the right value.) If the next file isn't compiled
- with -g, then the last function in this file winds up owning
- all of the text space up to the next -g file, or the end (minus
- shared libraries). This only matters for single stepping,
- and even then it will still work, except that it will single
- step through all of the covered functions, instead of setting
- breakpoints around them as it usualy does. This makes it
- pretty slow, but at least it doesn't fail.
-
- We can fix this with a fairly big change to bfd, but we need
- to coordinate better with Cygnus if we want to do that. FIXME. */
+ minsym = lookup_minimal_symbol (p, pst->filename, objfile);
+
+ if (minsym)
+ pst->texthigh = SYMBOL_VALUE_ADDRESS (minsym) + MSYMBOL_SIZE (minsym);
+
+ last_function_name = NULL;
}
- last_function_name = NULL;
- }
/* this test will be true if the last .o file is only data */
- if (pst->textlow == 0)
+ if (textlow_not_set)
pst->textlow = pst->texthigh;
+ else
+ {
+ struct partial_symtab *p1;
- /* If we know our own starting text address, then walk through all other
- psymtabs for this objfile, and if any didn't know their ending text
- address, set it to our starting address. Take care to not set our
- own ending address to our starting address, nor to set addresses on
- `dependency' files that have both textlow and texthigh zero. */
- if (pst->textlow) {
- ALL_OBJFILE_PSYMTABS (objfile, p1) {
- if (p1->texthigh == 0 && p1->textlow != 0 && p1 != pst) {
- p1->texthigh = pst->textlow;
- /* if this file has only data, then make textlow match texthigh */
- if (p1->textlow == 0)
- p1->textlow = p1->texthigh;
- }
+ /* If we know our own starting text address, then walk through all other
+ psymtabs for this objfile, and if any didn't know their ending text
+ address, set it to our starting address. Take care to not set our
+ own ending address to our starting address, nor to set addresses on
+ `dependency' files that have both textlow and texthigh zero. */
+
+ ALL_OBJFILE_PSYMTABS (objfile, p1)
+ {
+ if (p1->texthigh == 0 && p1->textlow != 0 && p1 != pst)
+ {
+ p1->texthigh = pst->textlow;
+ /* if this file has only data, then make textlow match texthigh */
+ if (p1->textlow == 0)
+ p1->textlow = p1->texthigh;
+ }
+ }
}
- }
/* End of kludge for patching Solaris textlow and texthigh. */
-
+#endif /* SOFUN_ADDRESS_MAYBE_MISSING. */
pst->n_global_syms =
objfile->global_psymbols.next - (objfile->global_psymbols.list + pst->globals_offset);
free_named_symtabs (pst->filename);
if (num_includes == 0
- && number_dependencies == 0
- && pst->n_global_syms == 0
- && pst->n_static_syms == 0) {
- /* Throw away this psymtab, it's empty. We can't deallocate it, since
- it is on the obstack, but we can forget to chain it on the list. */
- struct partial_symtab *prev_pst;
-
- /* First, snip it out of the psymtab chain */
-
- if (pst->objfile->psymtabs == pst)
- pst->objfile->psymtabs = pst->next;
- else
- for (prev_pst = pst->objfile->psymtabs; prev_pst; prev_pst = pst->next)
- if (prev_pst->next == pst)
- prev_pst->next = pst->next;
-
- /* Next, put it on a free list for recycling */
-
- pst->next = pst->objfile->free_psymtabs;
- pst->objfile->free_psymtabs = pst;
- }
+ && number_dependencies == 0
+ && pst->n_global_syms == 0
+ && pst->n_static_syms == 0
+ && has_line_numbers == 0)
+ {
+ /* Throw away this psymtab, it's empty. We can't deallocate it, since
+ it is on the obstack, but we can forget to chain it on the list. */
+ /* Empty psymtabs happen as a result of header files which don't have
+ any symbols in them. There can be a lot of them. But this check
+ is wrong, in that a psymtab with N_SLINE entries but nothing else
+ is not empty, but we don't realize that. Fixing that without slowing
+ things down might be tricky. */
+ struct partial_symtab *prev_pst;
+
+ /* First, snip it out of the psymtab chain */
+
+ if (pst->objfile->psymtabs == pst)
+ pst->objfile->psymtabs = pst->next;
+ else
+ for (prev_pst = pst->objfile->psymtabs; prev_pst; prev_pst = pst->next)
+ if (prev_pst->next == pst)
+ prev_pst->next = pst->next;
+
+ /* Next, put it on a free list for recycling */
+
+ pst->next = pst->objfile->free_psymtabs;
+ pst->objfile->free_psymtabs = pst;
+
+ /* Indicate that psymtab was thrown away. */
+ pst = (struct partial_symtab *)NULL;
+ }
+ return pst;
}
\f
static void
if (pst->readin)
{
- fprintf (stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
+ fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
pst->filename);
return;
}
/* Inform about additional files that need to be read in. */
if (info_verbose)
{
- fputs_filtered (" ", stdout);
+ fputs_filtered (" ", gdb_stdout);
wrap_here ("");
- fputs_filtered ("and ", stdout);
+ fputs_filtered ("and ", gdb_stdout);
wrap_here ("");
printf_filtered ("%s...", pst->dependencies[i]->filename);
wrap_here (""); /* Flush output */
- fflush (stdout);
+ gdb_flush (gdb_stdout);
}
dbx_psymtab_to_symtab_1 (pst->dependencies[i]);
}
symbol_size = SYMBOL_SIZE (pst);
/* Read in this file's symbols */
- bfd_seek (pst->objfile->obfd, SYMBOL_OFFSET (pst), L_SET);
- pst->symtab =
- read_ofile_symtab (pst->objfile, LDSYMOFF(pst), LDSYMLEN(pst),
- pst->textlow, pst->texthigh - pst->textlow,
- pst->section_offsets);
+ bfd_seek (pst->objfile->obfd, SYMBOL_OFFSET (pst), SEEK_SET);
+ read_ofile_symtab (pst);
sort_symtab_syms (pst->symtab);
do_cleanups (old_chain);
if (pst->readin)
{
- fprintf (stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
+ fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
pst->filename);
return;
}
if (info_verbose)
{
printf_filtered ("Reading in symbols for %s...", pst->filename);
- fflush (stdout);
+ gdb_flush (gdb_stdout);
}
sym_bfd = pst->objfile->obfd;
}
}
-/* Read in a defined section of a specific object file's symbols.
+/* Read in a defined section of a specific object file's symbols. */
- DESC is the file descriptor for the file, positioned at the
- beginning of the symtab
- SYM_OFFSET is the offset within the file of
- the beginning of the symbols we want to read
- SYM_SIZE is the size of the symbol info to read in.
- TEXT_OFFSET is the beginning of the text segment we are reading symbols for
- TEXT_SIZE is the size of the text segment read in.
- SECTION_OFFSETS are the relocation offsets which get added to each symbol. */
-
-static struct symtab *
-read_ofile_symtab (objfile, sym_offset, sym_size, text_offset, text_size,
- section_offsets)
- struct objfile *objfile;
- int sym_offset;
- int sym_size;
- CORE_ADDR text_offset;
- int text_size;
- struct section_offsets *section_offsets;
+static void
+read_ofile_symtab (pst)
+ struct partial_symtab *pst;
{
register char *namestring;
- register struct internal_nlist *bufp;
+ register struct external_nlist *bufp;
+ struct internal_nlist nlist;
unsigned char type;
unsigned max_symnum;
register bfd *abfd;
- struct symtab *rtn;
+ struct objfile *objfile;
+ int sym_offset; /* Offset to start of symbols to read */
+ int sym_size; /* Size of symbols to read */
+ CORE_ADDR text_offset; /* Start of text segment for symbols */
+ int text_size; /* Size of text segment for symbols */
+ struct section_offsets *section_offsets;
+
+ objfile = pst->objfile;
+ sym_offset = LDSYMOFF(pst);
+ sym_size = LDSYMLEN(pst);
+ text_offset = pst->textlow;
+ text_size = pst->texthigh - pst->textlow;
+ section_offsets = pst->section_offsets;
current_objfile = objfile;
subfile_stack = NULL;
would slow down initial readin, so we look for it here instead. */
if (!processing_acc_compilation && sym_offset >= (int)symbol_size)
{
- bfd_seek (symfile_bfd, sym_offset - symbol_size, L_INCR);
+ bfd_seek (symfile_bfd, sym_offset - symbol_size, SEEK_CUR);
fill_symbuf (abfd);
bufp = &symbuf[symbuf_idx++];
- SWAP_SYMBOL (bufp, abfd);
+ INTERNALIZE_SYMBOL (nlist, bufp, abfd);
+ OBJSTAT (objfile, n_stabs++);
SET_NAMESTRING ();
processing_gcc_compilation = 0;
- if (bufp->n_type == N_TEXT)
+ if (nlist.n_type == N_TEXT)
{
+ const char *tempstring = namestring;
+
if (STREQ (namestring, GCC_COMPILED_FLAG_SYMBOL))
processing_gcc_compilation = 1;
else if (STREQ (namestring, GCC2_COMPILED_FLAG_SYMBOL))
processing_gcc_compilation = 2;
+ if (tempstring[0] == bfd_get_symbol_leading_char (symfile_bfd))
+ ++tempstring;
+ if (STREQN (tempstring, "__gnu_compiled", 14))
+ processing_gcc_compilation = 2;
}
/* Try to select a C++ demangling based on the compilation unit
/* The N_SO starting this symtab is the first symbol, so we
better not check the symbol before it. I'm not this can
happen, but it doesn't hurt to check for it. */
- bfd_seek (symfile_bfd, sym_offset, L_INCR);
+ bfd_seek (symfile_bfd, sym_offset, SEEK_CUR);
processing_gcc_compilation = 0;
}
if (symbuf_idx == symbuf_end)
fill_symbuf (abfd);
bufp = &symbuf[symbuf_idx];
- if (bufp->n_type != (unsigned char)N_SO)
+ if (bfd_h_get_8 (abfd, bufp->e_type) != N_SO)
error("First symbol in segment of executable not a source symbol");
max_symnum = sym_size / symbol_size;
if (symbuf_idx == symbuf_end)
fill_symbuf(abfd);
bufp = &symbuf[symbuf_idx++];
- SWAP_SYMBOL (bufp, abfd);
+ INTERNALIZE_SYMBOL (nlist, bufp, abfd);
+ OBJSTAT (objfile, n_stabs++);
- type = bufp->n_type;
+ type = bfd_h_get_8 (abfd, bufp->e_type);
SET_NAMESTRING ();
if (type & N_STAB) {
- process_one_symbol (type, bufp->n_desc, bufp->n_value,
+ process_one_symbol (type, nlist.n_desc, nlist.n_value,
namestring, section_offsets, objfile);
}
/* We skip checking for a new .o or -l file; that should never
if (last_source_start_addr == 0)
last_source_start_addr = text_offset;
- rtn = end_symtab (text_offset + text_size, 0, 0, objfile, SECT_OFF_TEXT);
+ /* In reordered executables last_source_start_addr may not be the
+ lower bound for this symtab, instead use text_offset which comes
+ from pst->textlow which is correct. */
+ if (last_source_start_addr > text_offset)
+ last_source_start_addr = text_offset;
+
+ pst->symtab = end_symtab (text_offset + text_size, objfile, SECT_OFF_TEXT);
+
+ /* Process items which we had to "process_later" due to dependancies
+ on other stabs. */
+ process_now (objfile);
+
end_stabs ();
- return (rtn);
}
+
\f
/* This handles a single symbol from the symbol-file, building symbols
into a GDB symtab. It takes these arguments and an implicit argument.
struct section_offsets *section_offsets;
struct objfile *objfile;
{
-#ifndef SUN_FIXED_LBRAC_BUG
+#ifdef SUN_FIXED_LBRAC_BUG
+ /* If SUN_FIXED_LBRAC_BUG is defined, then it tells us whether we need
+ to correct the address of N_LBRAC's. If it is not defined, then
+ we never need to correct the addresses. */
+
/* This records the last pc address we've seen. We depend on there being
an SLINE or FUN or SO before the first LBRAC, since the variable does
not get reset in between reads of different symbol files. */
static CORE_ADDR last_pc_address;
#endif
+
register struct context_stack *new;
/* This remembers the address of the start of a function. It is used
because in Solaris 2, N_LBRAC, N_RBRAC, and N_SLINE entries are
other than Solaris 2, this just holds the SECT_OFF_TEXT value, and is
used to relocate these symbol types rather than SECTION_OFFSETS. */
static CORE_ADDR function_start_offset;
- char *colon_pos;
-#ifndef BLOCK_ADDRESS_FUNCTION_RELATIVE
- /* N_LBRAC, N_RBRAC and N_SLINE entries are not relative to the
- function start address, so just use the text offset. */
- function_start_offset = ANOFFSET (section_offsets, SECT_OFF_TEXT);
-#endif
+ /* If this is nonzero, we've seen a non-gcc N_OPT symbol for this source
+ file. Used to detect the SunPRO solaris compiler. */
+ static int n_opt_found;
+
+ /* The stab type used for the definition of the last function.
+ N_STSYM or N_GSYM for SunOS4 acc; N_FUN for other compilers. */
+ static int function_stab_type = 0;
+
+ if (!block_address_function_relative)
+ /* N_LBRAC, N_RBRAC and N_SLINE entries are not relative to the
+ function start address, so just use the text offset. */
+ function_start_offset = ANOFFSET (section_offsets, SECT_OFF_TEXT);
/* Something is wrong if we see real data before
seeing a source file name. */
if (last_source_file == NULL && type != (unsigned char)N_SO)
{
- /* Currently this ignores N_ENTRY on Gould machines, N_NSYM on machines
- where that code is defined. */
- if (IGNORE_SYMBOL (type))
- return;
-
- /* FIXME, this should not be an error, since it precludes extending
- the symbol table information in this way... */
- error ("Invalid symbol data: does not start by identifying a source file.");
+ /* Ignore any symbols which appear before an N_SO symbol. Currently
+ no one puts symbols there, but we should deal gracefully with the
+ case. A complain()t might be in order (if !IGNORE_SYMBOL (type)),
+ but this should not be an error (). */
+ return;
}
switch (type)
{
case N_FUN:
case N_FNAME:
-#if 0
-/* It seems that the Sun ANSI C compiler (acc) replaces N_FUN with N_GSYM and
- N_STSYM with a type code of f or F. Can't enable this until we get some
- stuff straightened out with psymtabs. FIXME. */
-
- case N_GSYM:
- case N_STSYM:
-#endif /* 0 */
- /* Relocate for dynamic loading */
- valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
-
- /* Either of these types of symbols indicates the start of
- a new function. We must process its "name" normally for dbx,
- but also record the start of a new lexical context, and possibly
- also the end of the lexical context for the previous function. */
- /* This is not always true. This type of symbol may indicate a
- text segment variable. */
-
- colon_pos = strchr (name, ':');
- if (!colon_pos++
- || (*colon_pos != 'f' && *colon_pos != 'F'))
- {
- define_symbol (valu, name, desc, type, objfile);
- break;
- }
-
-#ifndef SUN_FIXED_LBRAC_BUG
- last_pc_address = valu; /* Save for SunOS bug circumcision */
-#endif
-
-#ifdef BLOCK_ADDRESS_FUNCTION_RELATIVE
- /* On Solaris 2.0 compilers, the block addresses and N_SLINE's
- are relative to the start of the function. On normal systems,
- and when using gcc on Solaris 2.0, these addresses are just
- absolute, or relative to the N_SO, depending on
- BLOCK_ADDRESS_ABSOLUTE. */
- function_start_offset = valu;
-#endif
-
- within_function = 1;
- if (context_stack_depth > 0)
+ if (*name == '\000')
{
+ /* This N_FUN marks the end of a function. This closes off the
+ current block. */
+ within_function = 0;
new = pop_context ();
+
/* Make a block for the local symbols within. */
finish_block (new->name, &local_symbols, new->old_blocks,
- new->start_addr, valu, objfile);
+ new->start_addr, new->start_addr + valu,
+ objfile);
+ break;
}
- /* Stack must be empty now. */
- if (context_stack_depth != 0)
- complain (&lbrac_unmatched_complaint, symnum);
- new = push_context (0, valu);
- new->name = define_symbol (valu, name, desc, type, objfile);
- break;
+ /* Relocate for dynamic loading */
+ valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+ goto define_a_symbol;
case N_LBRAC:
/* This "symbol" just indicates the start of an inner lexical
context within a function. */
-#if defined(BLOCK_ADDRESS_ABSOLUTE) || defined(BLOCK_ADDRESS_FUNCTION_RELATIVE)
- /* Relocate for dynamic loading and Sun ELF acc fn-relative syms. */
+ /* Ignore extra outermost context from SunPRO cc and acc. */
+ if (n_opt_found && desc == 1)
+ break;
+
+#if defined(BLOCK_ADDRESS_ABSOLUTE)
+ /* Relocate for dynamic loading (?). */
valu += function_start_offset;
#else
- /* On most machines, the block addresses are relative to the
- N_SO, the linker did not relocate them (sigh). */
- valu += last_source_start_addr;
+ if (block_address_function_relative)
+ /* Relocate for Sun ELF acc fn-relative syms. */
+ valu += function_start_offset;
+ else
+ /* On most machines, the block addresses are relative to the
+ N_SO, the linker did not relocate them (sigh). */
+ valu += last_source_start_addr;
#endif
-#ifndef SUN_FIXED_LBRAC_BUG
- if (valu < last_pc_address) {
+#ifdef SUN_FIXED_LBRAC_BUG
+ if (!SUN_FIXED_LBRAC_BUG && valu < last_pc_address) {
/* Patch current LBRAC pc value to match last handy pc value */
complain (&lbrac_complaint);
valu = last_pc_address;
/* This "symbol" just indicates the end of an inner lexical
context that was started with N_LBRAC. */
-#if defined(BLOCK_ADDRESS_ABSOLUTE) || defined(BLOCK_ADDRESS_FUNCTION_RELATIVE)
- /* Relocate for dynamic loading and Sun ELF acc fn-relative syms. */
+ /* Ignore extra outermost context from SunPRO cc and acc. */
+ if (n_opt_found && desc == 1)
+ break;
+
+#if defined(BLOCK_ADDRESS_ABSOLUTE)
+ /* Relocate for dynamic loading (?). */
valu += function_start_offset;
#else
- /* On most machines, the block addresses are relative to the
- N_SO, the linker did not relocate them (sigh). */
- valu += last_source_start_addr;
+ if (block_address_function_relative)
+ /* Relocate for Sun ELF acc fn-relative syms. */
+ valu += function_start_offset;
+ else
+ /* On most machines, the block addresses are relative to the
+ N_SO, the linker did not relocate them (sigh). */
+ valu += last_source_start_addr;
#endif
new = pop_context();
if (!VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))
local_symbols = new->locals;
- /* If this is not the outermost LBRAC...RBRAC pair in the
- function, its local symbols preceded it, and are the ones
- just recovered from the context stack. Defined the block for them.
-
- If this is the outermost LBRAC...RBRAC pair, there is no
- need to do anything; leave the symbols that preceded it
- to be attached to the function's own block. However, if
- it is so, we need to indicate that we just moved outside
- of the function. */
- if (local_symbols
- && (context_stack_depth
- > !VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation)))
+ if (context_stack_depth
+ > !VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))
{
- /* FIXME Muzzle a compiler bug that makes end < start. */
- if (new->start_addr > valu)
+ /* This is not the outermost LBRAC...RBRAC pair in the function,
+ its local symbols preceded it, and are the ones just recovered
+ from the context stack. Define the block for them (but don't
+ bother if the block contains no symbols. Should we complain
+ on blocks without symbols? I can't think of any useful purpose
+ for them). */
+ if (local_symbols != NULL)
{
- complain (&lbrac_rbrac_complaint);
- new->start_addr = valu;
+ /* Muzzle a compiler bug that makes end < start. (which
+ compilers? Is this ever harmful?). */
+ if (new->start_addr > valu)
+ {
+ complain (&lbrac_rbrac_complaint);
+ new->start_addr = valu;
+ }
+ /* Make a block for the local symbols within. */
+ finish_block (0, &local_symbols, new->old_blocks,
+ new->start_addr, valu, objfile);
}
- /* Make a block for the local symbols within. */
- finish_block (0, &local_symbols, new->old_blocks,
- new->start_addr, valu, objfile);
}
else
{
+ /* This is the outermost LBRAC...RBRAC pair. There is no
+ need to do anything; leave the symbols that preceded it
+ to be attached to the function's own block. We need to
+ indicate that we just moved outside of the function. */
within_function = 0;
}
+
if (VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))
/* Now pop locals of block just finished. */
local_symbols = new->locals;
/* Relocate for dynamic loading */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
-#ifndef SUN_FIXED_LBRAC_BUG
+ n_opt_found = 0;
+
+#ifdef SUN_FIXED_LBRAC_BUG
last_pc_address = valu; /* Save for SunOS bug circumcision */
#endif
-
+
#ifdef PCC_SOL_BROKEN
/* pcc bug, occasionally puts out SO for SOL. */
if (context_stack_depth > 0)
patch_subfile_names (current_subfile, name);
break; /* Ignore repeated SOs */
}
- end_symtab (valu, 0, 0, objfile, SECT_OFF_TEXT);
+ end_symtab (valu, objfile, SECT_OFF_TEXT);
end_stabs ();
}
+
+ /* Null name means this just marks the end of text for this .o file.
+ Don't start a new symtab in this case. */
+ if (*name == '\000')
+ break;
+
start_stabs ();
start_symtab (name, NULL, valu);
+ record_debugformat ("stabs");
break;
-
case N_SOL:
/* This type of symbol indicates the start of data for
a sub-source-file, one whose contents were copied or
Enter it in the line list for this symbol table. */
/* Relocate for dynamic loading and for ELF acc fn-relative syms. */
valu += function_start_offset;
-#ifndef SUN_FIXED_LBRAC_BUG
+#ifdef SUN_FIXED_LBRAC_BUG
last_pc_address = valu; /* Save for SunOS bug circumcision */
#endif
record_line (current_subfile, desc, valu);
break;
case N_BCOMM:
- if (common_block)
- error ("Invalid symbol data: common within common at symtab pos %d",
- symnum);
- common_block = local_symbols;
- common_block_i = local_symbols ? local_symbols->nsyms : 0;
+ common_block_start (name, objfile);
break;
case N_ECOMM:
- /* Symbols declared since the BCOMM are to have the common block
- start address added in when we know it. common_block points to
- the first symbol after the BCOMM in the local_symbols list;
- copy the list and hang it off the symbol for the common block name
- for later fixup. */
- {
- int i;
- struct symbol *sym =
- (struct symbol *) xmmalloc (objfile -> md, sizeof (struct symbol));
- memset (sym, 0, sizeof *sym);
- SYMBOL_NAME (sym) = savestring (name, strlen (name));
- SYMBOL_CLASS (sym) = LOC_BLOCK;
- SYMBOL_NAMESPACE (sym) = (enum namespace)((long)
- copy_pending (local_symbols, common_block_i, common_block));
- i = hashname (SYMBOL_NAME (sym));
- SYMBOL_VALUE_CHAIN (sym) = global_sym_chain[i];
- global_sym_chain[i] = sym;
- common_block = 0;
- break;
- }
+ common_block_end (objfile);
+ break;
/* The following symbol types need to have the appropriate offset added
to their value; then we process symbol definitions in the name. */
case N_STSYM: /* Static symbol in data seg */
case N_LCSYM: /* Static symbol in BSS seg */
case N_ROSYM: /* Static symbol in Read-only data seg */
- /* HORRID HACK DEPT. However, it's Sun's furgin' fault. FIXME.
- Solaris2's stabs-in-coff makes *most* symbols relative
- but leaves a few absolute. N_STSYM and friends sit on the fence.
+ /* HORRID HACK DEPT. However, it's Sun's furgin' fault.
+ Solaris2's stabs-in-elf makes *most* symbols relative
+ but leaves a few absolute (at least for Solaris 2.1 and version
+ 2.0.1 of the SunPRO compiler). N_STSYM and friends sit on the fence.
.stab "foo:S...",N_STSYM is absolute (ld relocates it)
.stab "foo:V...",N_STSYM is relative (section base subtracted).
This leaves us no choice but to search for the 'S' or 'V'...
call level, which we really don't want to do). */
{
char *p;
- p = strchr (name, ':');
- if (p != 0 && p[1] == 'S')
+
+ /* .o files and NLMs have non-zero text seg offsets, but don't need
+ their static syms offset in this fashion. XXX - This is really a
+ crock that should be fixed in the solib handling code so that I
+ don't have to work around it here. */
+
+ if (!symfile_relocatable)
{
- /* FIXME! We relocate it by the TEXT offset, in case the
- whole module moved in memory. But this is wrong, since
- the sections can side around independently. */
- valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
- goto define_a_symbol;
+ p = strchr (name, ':');
+ if (p != 0 && p[1] == 'S')
+ {
+ /* The linker relocated it. We don't want to add an
+ elfstab_offset_sections-type offset, but we *do* want
+ to add whatever solib.c passed to symbol_file_add as
+ addr (this is known to affect SunOS4, and I suspect ELF
+ too). Since elfstab_offset_sections currently does not
+ muck with the text offset (there is no Ttext.text
+ symbol), we can get addr from the text offset. If
+ elfstab_offset_sections ever starts dealing with the
+ text offset, and we still need to do this, we need to
+ invent a SECT_OFF_ADDR_KLUDGE or something. */
+ valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+ goto define_a_symbol;
+ }
}
/* Since it's not the kludge case, re-dispatch to the right handler. */
switch (type) {
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
goto define_a_symbol;
+ /* The following symbol types we don't know how to process. Handle
+ them in a "default" way, but complain to people who care. */
+ default:
+ case N_CATCH: /* Exception handler catcher */
+ case N_EHDECL: /* Exception handler name */
+ case N_PC: /* Global symbol in Pascal */
+ case N_M2C: /* Modula-2 compilation unit */
+ /* N_MOD2: overlaps with N_EHDECL */
+ case N_SCOPE: /* Modula-2 scope information */
+ case N_ECOML: /* End common (local name) */
+ case N_NBTEXT: /* Gould Non-Base-Register symbols??? */
+ case N_NBDATA:
+ case N_NBBSS:
+ case N_NBSTS:
+ case N_NBLCS:
+ complain (&unknown_symtype_complaint, local_hex_string (type));
+ /* FALLTHROUGH */
+
/* The following symbol types don't need the address field relocated,
since it is either unused, or is absolute. */
define_a_symbol:
case N_PSYM: /* Parameter variable */
case N_LENG: /* Length of preceding symbol type */
if (name)
- define_symbol (valu, name, desc, type, objfile);
+ {
+ int deftype;
+ char *colon_pos = strchr (name, ':');
+ if (colon_pos == NULL)
+ deftype = '\0';
+ else
+ deftype = colon_pos[1];
+
+ switch (deftype)
+ {
+ case 'f':
+ case 'F':
+ function_stab_type = type;
+
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+ /* Deal with the SunPRO 3.0 compiler which omits the address
+ from N_FUN symbols. */
+ if (type == N_FUN
+ && valu == ANOFFSET (section_offsets, SECT_OFF_TEXT))
+ {
+ struct minimal_symbol *msym;
+ char *p;
+ int n;
+
+ p = strchr (name, ':');
+ if (p == NULL)
+ p = name;
+ n = p - name;
+ p = alloca (n + 1);
+ strncpy (p, name, n);
+ p[n] = 0;
+
+ msym = lookup_minimal_symbol (p, last_source_file,
+ objfile);
+ if (msym)
+ valu = SYMBOL_VALUE_ADDRESS (msym);
+ }
+#endif
+
+#ifdef SUN_FIXED_LBRAC_BUG
+ /* The Sun acc compiler, under SunOS4, puts out
+ functions with N_GSYM or N_STSYM. The problem is
+ that the address of the symbol is no good (for N_GSYM
+ it doesn't even attept an address; for N_STSYM it
+ puts out an address but then it gets relocated
+ relative to the data segment, not the text segment).
+ Currently we can't fix this up later as we do for
+ some types of symbol in scan_file_globals.
+ Fortunately we do have a way of finding the address -
+ we know that the value in last_pc_address is either
+ the one we want (if we're dealing with the first
+ function in an object file), or somewhere in the
+ previous function. This means that we can use the
+ minimal symbol table to get the address. */
+
+ /* Starting with release 3.0, the Sun acc compiler,
+ under SunOS4, puts out functions with N_FUN and a value
+ of zero. This gets relocated to the start of the text
+ segment of the module, which is no good either.
+ Under SunOS4 we can deal with this as N_SLINE and N_SO
+ entries contain valid absolute addresses.
+ Release 3.0 acc also puts out N_OPT entries, which makes
+ it possible to discern acc from cc or gcc. */
+
+ if (type == N_GSYM || type == N_STSYM
+ || (type == N_FUN
+ && n_opt_found && !block_address_function_relative))
+ {
+ struct minimal_symbol *m;
+ int l = colon_pos - name;
+
+ m = lookup_minimal_symbol_by_pc (last_pc_address);
+ if (m && STREQN (SYMBOL_NAME (m), name, l)
+ && SYMBOL_NAME (m) [l] == '\0')
+ /* last_pc_address was in this function */
+ valu = SYMBOL_VALUE (m);
+ else if (m && SYMBOL_NAME (m+1)
+ && STREQN (SYMBOL_NAME (m+1), name, l)
+ && SYMBOL_NAME (m+1) [l] == '\0')
+ /* last_pc_address was in last function */
+ valu = SYMBOL_VALUE (m+1);
+ else
+ /* Not found - use last_pc_address (for finish_block) */
+ valu = last_pc_address;
+ }
+
+ last_pc_address = valu; /* Save for SunOS bug circumcision */
+#endif
+
+ if (block_address_function_relative)
+ /* For Solaris 2.0 compilers, the block addresses and
+ N_SLINE's are relative to the start of the
+ function. On normal systems, and when using gcc on
+ Solaris 2.0, these addresses are just absolute, or
+ relative to the N_SO, depending on
+ BLOCK_ADDRESS_ABSOLUTE. */
+ function_start_offset = valu;
+
+ within_function = 1;
+ if (context_stack_depth > 0)
+ {
+ new = pop_context ();
+ /* Make a block for the local symbols within. */
+ finish_block (new->name, &local_symbols, new->old_blocks,
+ new->start_addr, valu, objfile);
+ }
+ /* Stack must be empty now. */
+ if (context_stack_depth != 0)
+ complain (&lbrac_unmatched_complaint, symnum);
+
+ new = push_context (0, valu);
+ new->name = define_symbol (valu, name, desc, type, objfile);
+ break;
+
+ default:
+ define_symbol (valu, name, desc, type, objfile);
+ break;
+ }
+ }
break;
/* We use N_OPT to carry the gcc2_compiled flag. Sun uses it
}
#endif
}
+ else
+ n_opt_found = 1;
}
break;
case N_ENDM: /* Solaris 2: End of module */
case N_MAIN: /* Name of main routine. */
break;
-
- /* The following symbol types we don't know how to process. Handle
- them in a "default" way, but complain to people who care. */
- default:
- case N_CATCH: /* Exception handler catcher */
- case N_EHDECL: /* Exception handler name */
- case N_PC: /* Global symbol in Pascal */
- case N_M2C: /* Modula-2 compilation unit */
- /* N_MOD2: overlaps with N_EHDECL */
- case N_SCOPE: /* Modula-2 scope information */
- case N_ECOML: /* End common (local name) */
- case N_NBTEXT: /* Gould Non-Base-Register symbols??? */
- case N_NBDATA:
- case N_NBBSS:
- case N_NBSTS:
- case N_NBLCS:
- complain (&unknown_symtype_complaint, local_hex_string(type));
- if (name)
- define_symbol (valu, name, desc, type, objfile);
}
+ /* '#' is a GNU C extension to allow one symbol to refer to another
+ related symbol.
+
+ Generally this is used so that an alias can refer to its main
+ symbol. */
+ if (name[0] == '#')
+ {
+ /* Initialize symbol reference names and determine if this is
+ a definition. If symbol reference is being defined, go
+ ahead and add it. Otherwise, just return sym. */
+
+ char *s;
+ int refnum;
+
+ /* If this stab defines a new reference ID that is not on the
+ reference list, then put it on the reference list.
+
+ We go ahead and advance NAME past the reference, even though
+ it is not strictly necessary at this time. */
+ if (refnum = symbol_reference_defined (&s), refnum)
+ if (!ref_search (refnum))
+ ref_add (refnum, 0, name, valu);
+ name = s;
+ }
+
+
previous_stab_code = type;
}
\f
-/* Copy a pending list, used to record the contents of a common
- block for later fixup. */
-static struct pending *
-copy_pending (beg, begi, end)
- struct pending *beg;
- int begi;
- struct pending *end;
+/* FIXME: The only difference between this and elfstab_build_psymtabs
+ is the call to install_minimal_symbols for elf, and the support for
+ split sections. If the differences are really that small, the code
+ should be shared. */
+
+/* Scan and build partial symbols for an coff symbol file.
+ The coff file has already been processed to get its minimal symbols.
+
+ This routine is the equivalent of dbx_symfile_init and dbx_symfile_read
+ rolled into one.
+
+ OBJFILE is the object file we are reading symbols from.
+ ADDR is the address relative to which the symbols are (e.g.
+ the base address of the text segment).
+ MAINLINE is true if we are reading the main symbol
+ table (as opposed to a shared lib or dynamically loaded file).
+ TEXTADDR is the address of the text section.
+ TEXTSIZE is the size of the text section.
+ STABSECTS is the list of .stab sections in OBJFILE.
+ STABSTROFFSET and STABSTRSIZE define the location in OBJFILE where the
+ .stabstr section exists.
+
+ This routine is mostly copied from dbx_symfile_init and dbx_symfile_read,
+ adjusted for coff details. */
+
+void
+coffstab_build_psymtabs (objfile, section_offsets, mainline,
+ textaddr, textsize, stabsects,
+ stabstroffset, stabstrsize)
+ struct objfile *objfile;
+ struct section_offsets *section_offsets;
+ int mainline;
+ CORE_ADDR textaddr;
+ unsigned int textsize;
+ struct stab_section_list *stabsects;
+ file_ptr stabstroffset;
+ unsigned int stabstrsize;
{
- struct pending *new = 0;
- struct pending *next;
+ int val;
+ bfd *sym_bfd = objfile->obfd;
+ char *name = bfd_get_filename (sym_bfd);
+ struct dbx_symfile_info *info;
+ unsigned int stabsize;
+
+ /* There is already a dbx_symfile_info allocated by our caller.
+ It might even contain some info from the coff symtab to help us. */
+ info = objfile->sym_stab_info;
- for (next = beg; next != 0 && (next != end || begi < end->nsyms);
- next = next->next, begi = 0)
+ DBX_TEXT_ADDR (objfile) = textaddr;
+ DBX_TEXT_SIZE (objfile) = textsize;
+
+#define COFF_STABS_SYMBOL_SIZE 12 /* XXX FIXME XXX */
+ DBX_SYMBOL_SIZE (objfile) = COFF_STABS_SYMBOL_SIZE;
+ DBX_STRINGTAB_SIZE (objfile) = stabstrsize;
+
+ if (stabstrsize > bfd_get_size (sym_bfd))
+ error ("ridiculous string table size: %d bytes", stabstrsize);
+ DBX_STRINGTAB (objfile) = (char *)
+ obstack_alloc (&objfile->psymbol_obstack, stabstrsize+1);
+ OBJSTAT (objfile, sz_strtab += stabstrsize+1);
+
+ /* Now read in the string table in one big gulp. */
+
+ val = bfd_seek (sym_bfd, stabstroffset, SEEK_SET);
+ if (val < 0)
+ perror_with_name (name);
+ val = bfd_read (DBX_STRINGTAB (objfile), stabstrsize, 1, sym_bfd);
+ if (val != stabstrsize)
+ perror_with_name (name);
+
+ stabsread_new_init ();
+ buildsym_new_init ();
+ free_header_files ();
+ init_header_files ();
+
+ processing_acc_compilation = 1;
+
+ /* In a coff file, we've already installed the minimal symbols that came
+ from the coff (non-stab) symbol table, so always act like an
+ incremental load here. */
+ if (stabsects->next == NULL)
+ {
+ stabsize = bfd_section_size (sym_bfd, stabsects->section);
+ DBX_SYMCOUNT (objfile) = stabsize / DBX_SYMBOL_SIZE (objfile);
+ DBX_SYMTAB_OFFSET (objfile) = stabsects->section->filepos;
+ }
+ else
{
- register int j;
- for (j = begi; j < next->nsyms; j++)
- add_symbol_to_list (next->symbol[j], &new);
+ struct stab_section_list *stabsect;
+
+ DBX_SYMCOUNT (objfile) = 0;
+ for (stabsect = stabsects; stabsect != NULL; stabsect = stabsect->next)
+ {
+ stabsize = bfd_section_size (sym_bfd, stabsect->section);
+ DBX_SYMCOUNT (objfile) += stabsize / DBX_SYMBOL_SIZE (objfile);
+ }
+
+ DBX_SYMTAB_OFFSET (objfile) = stabsects->section->filepos;
+
+ symbuf_sections = stabsects->next;
+ symbuf_left = bfd_section_size (sym_bfd, stabsects->section);
+ symbuf_read = 0;
}
- return new;
+
+ dbx_symfile_read (objfile, section_offsets, 0);
}
\f
/* Scan and build partial symbols for an ELF symbol file.
bfd *sym_bfd = objfile->obfd;
char *name = bfd_get_filename (sym_bfd);
struct dbx_symfile_info *info;
+ asection *text_sect;
/* There is already a dbx_symfile_info allocated by our caller.
It might even contain some info from the ELF symtab to help us. */
- info = (struct dbx_symfile_info *) objfile->sym_private;
+ info = objfile->sym_stab_info;
- DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
- if (!DBX_TEXT_SECT (objfile))
+ text_sect = bfd_get_section_by_name (sym_bfd, ".text");
+ if (!text_sect)
error ("Can't find .text section in symbol file");
+ DBX_TEXT_ADDR (objfile) = bfd_section_vma (sym_bfd, text_sect);
+ DBX_TEXT_SIZE (objfile) = bfd_section_size (sym_bfd, text_sect);
#define ELF_STABS_SYMBOL_SIZE 12 /* XXX FIXME XXX */
DBX_SYMBOL_SIZE (objfile) = ELF_STABS_SYMBOL_SIZE;
DBX_STRINGTAB_SIZE (objfile) = stabstrsize;
DBX_SYMTAB_OFFSET (objfile) = staboffset;
- if (stabstrsize < 0 /* FIXME: stabstrsize is unsigned; never true! */
- || stabstrsize > bfd_get_size (sym_bfd))
+ if (stabstrsize > bfd_get_size (sym_bfd))
error ("ridiculous string table size: %d bytes", stabstrsize);
DBX_STRINGTAB (objfile) = (char *)
obstack_alloc (&objfile->psymbol_obstack, stabstrsize+1);
+ OBJSTAT (objfile, sz_strtab += stabstrsize+1);
/* Now read in the string table in one big gulp. */
- val = bfd_seek (sym_bfd, stabstroffset, L_SET);
+ val = bfd_seek (sym_bfd, stabstroffset, SEEK_SET);
if (val < 0)
perror_with_name (name);
val = bfd_read (DBX_STRINGTAB (objfile), stabstrsize, 1, sym_bfd);
dbx_symfile_read (objfile, section_offsets, 0);
}
\f
-/* Scan and build partial symbols for a PA symbol file.
- This PA file has already been processed to get its minimal symbols.
+/* Scan and build partial symbols for a file with special sections for stabs
+ and stabstrings. The file has already been processed to get its minimal
+ symbols, and any other symbols that might be necessary to resolve GSYMs.
+
+ This routine is the equivalent of dbx_symfile_init and dbx_symfile_read
+ rolled into one.
OBJFILE is the object file we are reading symbols from.
- ADDR is the address relative to which the symbols are (e.g.
- the base address of the text segment).
- MAINLINE is true if we are reading the main symbol
- table (as opposed to a shared lib or dynamically loaded file).
+ ADDR is the address relative to which the symbols are (e.g. the base address
+ of the text segment).
+ MAINLINE is true if we are reading the main symbol table (as opposed to a
+ shared lib or dynamically loaded file).
+ STAB_NAME is the name of the section that contains the stabs.
+ STABSTR_NAME is the name of the section that contains the stab strings.
- */
+ This routine is mostly copied from dbx_symfile_init and dbx_symfile_read. */
void
-pastab_build_psymtabs (objfile, section_offsets, mainline)
+stabsect_build_psymtabs (objfile, section_offsets, mainline, stab_name,
+ stabstr_name, text_name)
struct objfile *objfile;
struct section_offsets *section_offsets;
int mainline;
+ char *stab_name;
+ char *stabstr_name;
+ char *text_name;
{
- free_header_files ();
- init_header_files ();
+ int val;
+ bfd *sym_bfd = objfile->obfd;
+ char *name = bfd_get_filename (sym_bfd);
+ asection *stabsect;
+ asection *stabstrsect;
+ asection *text_sect;
- /* In a PA file, we've already installed the minimal symbols that came
- from the PA (non-stab) symbol table, so always act like an
- incremental load here. */
+ stabsect = bfd_get_section_by_name (sym_bfd, stab_name);
+ stabstrsect = bfd_get_section_by_name (sym_bfd, stabstr_name);
- dbx_symfile_read (objfile, section_offsets, mainline);
-}
-\f
-/* Parse the user's idea of an offset for dynamic linking, into our idea
- of how to represent it for fast symbol reading. */
+ if (!stabsect)
+ return;
-static struct section_offsets *
-dbx_symfile_offsets (objfile, addr)
- struct objfile *objfile;
- CORE_ADDR addr;
-{
- struct section_offsets *section_offsets;
- int i;
-
- section_offsets = (struct section_offsets *)
- obstack_alloc (&objfile -> psymbol_obstack,
- sizeof (struct section_offsets) +
- sizeof (section_offsets->offsets) * (SECT_OFF_MAX-1));
-
- for (i = 0; i < SECT_OFF_MAX; i++)
- ANOFFSET (section_offsets, i) = addr;
+ if (!stabstrsect)
+ error ("stabsect_build_psymtabs: Found stabs (%s), but not string section (%s)",
+ stab_name, stabstr_name);
+
+ objfile->sym_stab_info = (PTR) xmalloc (sizeof (struct dbx_symfile_info));
+ memset (objfile->sym_stab_info, 0, sizeof (struct dbx_symfile_info));
+
+ text_sect = bfd_get_section_by_name (sym_bfd, text_name);
+ if (!text_sect)
+ error ("Can't find %s section in symbol file", text_name);
+ DBX_TEXT_ADDR (objfile) = bfd_section_vma (sym_bfd, text_sect);
+ DBX_TEXT_SIZE (objfile) = bfd_section_size (sym_bfd, text_sect);
+
+ DBX_SYMBOL_SIZE (objfile) = sizeof (struct external_nlist);
+ DBX_SYMCOUNT (objfile) = bfd_section_size (sym_bfd, stabsect)
+ / DBX_SYMBOL_SIZE (objfile);
+ DBX_STRINGTAB_SIZE (objfile) = bfd_section_size (sym_bfd, stabstrsect);
+ DBX_SYMTAB_OFFSET (objfile) = stabsect->filepos; /* XXX - FIXME: POKING INSIDE BFD DATA STRUCTURES */
- return section_offsets;
+ if (DBX_STRINGTAB_SIZE (objfile) > bfd_get_size (sym_bfd))
+ error ("ridiculous string table size: %d bytes", DBX_STRINGTAB_SIZE (objfile));
+ DBX_STRINGTAB (objfile) = (char *)
+ obstack_alloc (&objfile->psymbol_obstack, DBX_STRINGTAB_SIZE (objfile) + 1);
+ OBJSTAT (objfile, sz_strtab += DBX_STRINGTAB_SIZE (objfile) + 1);
+
+ /* Now read in the string table in one big gulp. */
+
+ val = bfd_get_section_contents (sym_bfd, /* bfd */
+ stabstrsect, /* bfd section */
+ DBX_STRINGTAB (objfile), /* input buffer */
+ 0, /* offset into section */
+ DBX_STRINGTAB_SIZE (objfile)); /* amount to read */
+
+ if (!val)
+ perror_with_name (name);
+
+ stabsread_new_init ();
+ buildsym_new_init ();
+ free_header_files ();
+ init_header_files ();
+ install_minimal_symbols (objfile);
+
+ /* Now, do an incremental load */
+
+ processing_acc_compilation = 1;
+ dbx_symfile_read (objfile, section_offsets, 0);
}
\f
-/* Register our willingness to decode symbols for SunOS and a.out and
- b.out files handled by BFD... */
-static struct sym_fns sunos_sym_fns =
-{
- "sunOs", /* sym_name: name or name prefix of BFD target type */
- 6, /* sym_namelen: number of significant sym_name chars */
- dbx_new_init, /* sym_new_init: init anything gbl to entire symtab */
- dbx_symfile_init, /* sym_init: read initial info, setup for sym_read() */
- dbx_symfile_read, /* sym_read: read a symbol file into symtab */
- dbx_symfile_finish, /* sym_finish: finished with file, cleanup */
- dbx_symfile_offsets, /* sym_offsets: parse user's offsets to internal form */
- NULL /* next: pointer to next struct sym_fns */
-};
-
static struct sym_fns aout_sym_fns =
{
- "a.out", /* sym_name: name or name prefix of BFD target type */
- 5, /* sym_namelen: number of significant sym_name chars */
- dbx_new_init, /* sym_new_init: init anything gbl to entire symtab */
- dbx_symfile_init, /* sym_init: read initial info, setup for sym_read() */
- dbx_symfile_read, /* sym_read: read a symbol file into symtab */
- dbx_symfile_finish, /* sym_finish: finished with file, cleanup */
- dbx_symfile_offsets, /* sym_offsets: parse user's offsets to internal form */
- NULL /* next: pointer to next struct sym_fns */
-};
-
-static struct sym_fns bout_sym_fns =
-{
- "b.out", /* sym_name: name or name prefix of BFD target type */
- 5, /* sym_namelen: number of significant sym_name chars */
+ bfd_target_aout_flavour,
dbx_new_init, /* sym_new_init: init anything gbl to entire symtab */
dbx_symfile_init, /* sym_init: read initial info, setup for sym_read() */
dbx_symfile_read, /* sym_read: read a symbol file into symtab */
dbx_symfile_finish, /* sym_finish: finished with file, cleanup */
- dbx_symfile_offsets, /* sym_offsets: parse user's offsets to internal form */
+ default_symfile_offsets,
+ /* sym_offsets: parse user's offsets to internal form */
NULL /* next: pointer to next struct sym_fns */
};
void
_initialize_dbxread ()
{
- add_symtab_fns(&sunos_sym_fns);
add_symtab_fns(&aout_sym_fns);
- add_symtab_fns(&bout_sym_fns);
}