/* Read dbx symbol tables and convert to internal format, for GDB.
- Copyright 1986, 1987, 1988, 1989, 1990, 1991 Free Software Foundation, Inc.
+ Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
+ Free Software Foundation, Inc.
This file is part of GDB.
#if defined(USG) || defined(__CYGNUSCLIB__)
#include <sys/types.h>
#include <fcntl.h>
-#define L_SET 0
-#define L_INCR 1
-#endif
-
-#ifdef GDB_TARGET_IS_HPPA
-/* We don't want to use HP-UX's nlists. */
-#define _NLIST_INCLUDED
#endif
#include <obstack.h>
#include "target.h"
#include "gdbcore.h" /* for bfd stuff */
#include "libbfd.h" /* FIXME Secret internal BFD stuff (bfd_read) */
-#ifdef GDB_TARGET_IS_HPPA
-#include "libhppa.h"
-#include "syms.h"
-#else
#include "libaout.h" /* FIXME Secret internal BFD stuff for a.out */
-#endif
#include "symfile.h"
#include "objfiles.h"
#include "buildsym.h"
#include "aout/aout64.h"
#include "aout/stab_gnu.h" /* We always use GNU stabs, not native, now */
+#if !defined (SEEK_SET)
+#define SEEK_SET 0
+#define SEEK_CUR 1
+#endif
+
/* Each partial symbol table entry contains a pointer to private data for the
read_symtab() function to use when expanding a partial symbol table entry
to a full symbol table entry.
struct complaint unknown_symtype_complaint =
{"unknown symbol type %s", 0, 0};
+struct complaint unknown_symchar_complaint =
+ {"unknown symbol type character `%c'", 0, 0};
+
struct complaint lbrac_rbrac_complaint =
{"block start larger than block end", 0, 0};
static struct pending *
copy_pending PARAMS ((struct pending *, int, struct pending *));
-static struct symtab *
-read_ofile_symtab PARAMS ((struct objfile *, int, int, CORE_ADDR, int,
- struct section_offsets *));
+static void
+read_ofile_symtab PARAMS ((struct partial_symtab *));
static void
dbx_psymtab_to_symtab PARAMS ((struct partial_symtab *));
f->length *= 2;
f->vector = (struct type **)
xrealloc (f->vector, f->length * sizeof (struct type *));
- bzero (&f->vector[f->length / 2],
- f->length * sizeof (struct type *) / 2);
+ memset (&f->vector[f->length / 2],
+ '\0', f->length * sizeof (struct type *) / 2);
}
return &f->vector[index];
}
{
enum minimal_symbol_type ms_type;
- switch (type &~ N_EXT) {
- case N_TEXT: ms_type = mst_text; break;
- case N_DATA: ms_type = mst_data; break;
- case N_BSS: ms_type = mst_bss; break;
- case N_ABS: ms_type = mst_abs; break;
+ switch (type)
+ {
+ case N_TEXT | N_EXT: ms_type = mst_text; break;
+ case N_DATA | N_EXT: ms_type = mst_data; break;
+ case N_BSS | N_EXT: ms_type = mst_bss; break;
+ case N_ABS | N_EXT: ms_type = mst_abs; break;
#ifdef N_SETV
- case N_SETV: ms_type = mst_data; break;
+ case N_SETV | N_EXT: ms_type = mst_data; break;
+ case N_SETV:
+ /* I don't think this type actually exists; since a N_SETV is the result
+ of going over many .o files, it doesn't make sense to have one
+ file local. */
+ ms_type = mst_file_data;
+ break;
#endif
+ case N_TEXT:
+ /* Don't put gcc_compiled, __gnu_compiled_cplus, and friends into
+ the minimal symbols, because if there is also another symbol
+ at the same address (e.g. the first function of the file),
+ lookup_minimal_symbol_by_pc would have no way of getting the
+ right one. */
+ if (name[0] == 'g'
+ && (strcmp (name, GCC_COMPILED_FLAG_SYMBOL) == 0
+ || strcmp (name, GCC2_COMPILED_FLAG_SYMBOL) == 0))
+ return;
+
+ {
+ char *tempstring = name;
+ if (tempstring[0] == bfd_get_symbol_leading_char (objfile->obfd))
+ ++tempstring;
+ if (STREQN (tempstring, "__gnu_compiled", 14))
+ return;
+ }
+
+ case N_NBTEXT:
+ case N_FN:
+ case N_FN_SEQ:
+ ms_type = mst_file_text;
+ break;
+
+ case N_DATA:
+ ms_type = mst_file_data;
+
+ /* Check for __DYNAMIC, which is used by Sun shared libraries.
+ Record it as global even if it's local, not global, so
+ lookup_minimal_symbol can find it. We don't check symbol_leading_char
+ because for SunOS4 it always is '_'. */
+ if (name[8] == 'C' && STREQ ("__DYNAMIC", name))
+ ms_type = mst_data;
+
+ /* Same with virtual function tables, both global and static. */
+ {
+ char *tempstring = name;
+ if (tempstring[0] == bfd_get_symbol_leading_char (objfile->obfd))
+ ++tempstring;
+ if (VTBL_PREFIX_P ((tempstring)))
+ ms_type = mst_data;
+ }
+ break;
+
+ case N_BSS:
+ ms_type = mst_file_bss;
+ break;
+
default: ms_type = mst_unknown; break;
}
- prim_record_minimal_symbol (obsavestring (name, strlen (name), &objfile -> symbol_obstack),
- address, ms_type);
+ prim_record_minimal_symbol
+ (obsavestring (name, strlen (name), &objfile -> symbol_obstack),
+ address,
+ ms_type);
}
\f
/* Scan and build partial symbols for a symbol file.
{
bfd *sym_bfd;
int val;
+ struct cleanup *back_to;
sym_bfd = objfile->obfd;
- val = bfd_seek (objfile->obfd, DBX_SYMTAB_OFFSET (objfile), L_SET);
+ val = bfd_seek (objfile->obfd, DBX_SYMTAB_OFFSET (objfile), SEEK_SET);
if (val < 0)
perror_with_name (objfile->name);
if (mainline || objfile->global_psymbols.size == 0 || objfile->static_psymbols.size == 0)
init_psymbol_list (objfile);
-#ifdef GDB_TARGET_IS_HPPA
- symbol_size = obj_dbx_symbol_entry_size (sym_bfd);
-#else
symbol_size = DBX_SYMBOL_SIZE (objfile);
-#endif
symbol_table_offset = DBX_SYMTAB_OFFSET (objfile);
pending_blocks = 0;
- make_cleanup (really_free_pendings, 0);
+ back_to = make_cleanup (really_free_pendings, 0);
init_minimal_symbol_collection ();
make_cleanup (discard_minimal_symbols, 0);
printf_filtered ("(no debugging symbols found)...");
wrap_here ("");
}
+
+ do_cleanups (back_to);
}
/* Initialize anything that needs initializing when a completely new
be called unless this is an a.out (or very similar) file.
FIXME, there should be a cleaner peephole into the BFD environment here. */
+#define DBX_STRINGTAB_SIZE_SIZE sizeof(long) /* FIXME */
+
static void
dbx_symfile_init (objfile)
struct objfile *objfile;
int val;
bfd *sym_bfd = objfile->obfd;
char *name = bfd_get_filename (sym_bfd);
- unsigned char size_temp[4];
+ unsigned char size_temp[DBX_STRINGTAB_SIZE_SIZE];
/* Allocate struct to keep track of the symfile */
- objfile->sym_private = (PTR)
+ objfile->sym_stab_info = (PTR)
xmmalloc (objfile -> md, sizeof (struct dbx_symfile_info));
/* FIXME POKING INSIDE BFD DATA STRUCTURES */
-#ifdef GDB_TARGET_IS_HPPA
-#define STRING_TABLE_OFFSET (sym_bfd->origin + obj_dbx_str_filepos (sym_bfd))
-#define SYMBOL_TABLE_OFFSET (sym_bfd->origin + obj_dbx_sym_filepos (sym_bfd))
-#define HP_STRING_TABLE_OFFSET (sym_bfd->origin + obj_hp_str_filepos (sym_bfd))
-#define HP_SYMBOL_TABLE_OFFSET (sym_bfd->origin + obj_hp_sym_filepos (sym_bfd))
-#else
#define STRING_TABLE_OFFSET (sym_bfd->origin + obj_str_filepos (sym_bfd))
#define SYMBOL_TABLE_OFFSET (sym_bfd->origin + obj_sym_filepos (sym_bfd))
-#endif
+
/* FIXME POKING INSIDE BFD DATA STRUCTURES */
DBX_SYMFILE_INFO (objfile)->stab_section_info = NULL;
if (!DBX_TEXT_SECT (objfile))
error ("Can't find .text section in symbol file");
-#ifdef GDB_TARGET_IS_HPPA
- HP_SYMCOUNT (objfile) = obj_hp_sym_count (sym_bfd);
- DBX_SYMCOUNT (objfile) = obj_dbx_sym_count (sym_bfd);
-#else
DBX_SYMBOL_SIZE (objfile) = obj_symbol_entry_size (sym_bfd);
DBX_SYMCOUNT (objfile) = bfd_get_symcount (sym_bfd);
-#endif
DBX_SYMTAB_OFFSET (objfile) = SYMBOL_TABLE_OFFSET;
/* Read the string table and stash it away in the psymbol_obstack. It is
table size would be so totally bogus that the malloc would fail. Now
that we put in on the psymbol_obstack, we can't do this since gdb gets
a fatal error (out of virtual memory) if the size is bogus. We can
- however at least check to see if the size is zero or some negative
- value. */
-
-#ifdef GDB_TARGET_IS_HPPA
- DBX_STRINGTAB_SIZE (objfile) = obj_dbx_stringtab_size (sym_bfd);
- HP_STRINGTAB_SIZE (objfile) = obj_hp_stringtab_size (sym_bfd);
-#else
- val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, L_SET);
- if (val < 0)
- perror_with_name (name);
-
- val = bfd_read ((PTR)size_temp, sizeof (long), 1, sym_bfd);
- if (val < 0)
- perror_with_name (name);
-
- DBX_STRINGTAB_SIZE (objfile) = bfd_h_get_32 (sym_bfd, size_temp);
-#endif
-
- if (DBX_STRINGTAB_SIZE (objfile) <= 0)
- error ("ridiculous string table size (%d bytes).",
- DBX_STRINGTAB_SIZE (objfile));
-
- DBX_STRINGTAB (objfile) =
- (char *) obstack_alloc (&objfile -> psymbol_obstack,
- DBX_STRINGTAB_SIZE (objfile));
-#ifdef GDB_TARGET_IS_HPPA
- if (HP_STRINGTAB_SIZE (objfile) <= 0)
- error ("ridiculous string table size (%d bytes).",
- HP_STRINGTAB_SIZE (objfile));
-
- HP_STRINGTAB (objfile) =
- (char *) obstack_alloc (&objfile -> psymbol_obstack,
- HP_STRINGTAB_SIZE (objfile));
-#endif
+ however at least check to see if the size is less than the size of
+ the size field itself, or larger than the size of the entire file.
+ Note that all valid string tables have a size greater than zero, since
+ the bytes used to hold the size are included in the count. */
- /* Now read in the string table in one big gulp. */
-
- val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, L_SET);
- if (val < 0)
- perror_with_name (name);
- val = bfd_read (DBX_STRINGTAB (objfile), DBX_STRINGTAB_SIZE (objfile), 1,
- sym_bfd);
- if (val != DBX_STRINGTAB_SIZE (objfile))
- perror_with_name (name);
-#ifdef GDB_TARGET_IS_HPPA
- val = bfd_seek (sym_bfd, HP_STRING_TABLE_OFFSET, L_SET);
- if (val < 0)
- perror_with_name (name);
- val = bfd_read (HP_STRINGTAB (objfile), HP_STRINGTAB_SIZE (objfile), 1,
- sym_bfd);
- if (val != HP_STRINGTAB_SIZE (objfile))
- perror_with_name (name);
-#endif
-#ifdef GDB_TARGET_IS_HPPA
- HP_SYMTAB_OFFSET (objfile) = HP_SYMBOL_TABLE_OFFSET;
-#endif
+ if (STRING_TABLE_OFFSET == 0)
+ {
+ /* It appears that with the existing bfd code, STRING_TABLE_OFFSET
+ will never be zero, even when there is no string table. This
+ would appear to be a bug in bfd. */
+ DBX_STRINGTAB_SIZE (objfile) = 0;
+ DBX_STRINGTAB (objfile) = NULL;
+ }
+ else
+ {
+ val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, SEEK_SET);
+ if (val < 0)
+ perror_with_name (name);
+
+ memset ((PTR) size_temp, 0, sizeof (size_temp));
+ val = bfd_read ((PTR) size_temp, sizeof (size_temp), 1, sym_bfd);
+ if (val < 0)
+ {
+ perror_with_name (name);
+ }
+ else if (val == 0)
+ {
+ /* With the existing bfd code, STRING_TABLE_OFFSET will be set to
+ EOF if there is no string table, and attempting to read the size
+ from EOF will read zero bytes. */
+ DBX_STRINGTAB_SIZE (objfile) = 0;
+ DBX_STRINGTAB (objfile) = NULL;
+ }
+ else
+ {
+ /* Read some data that would appear to be the string table size.
+ If there really is a string table, then it is probably the right
+ size. Byteswap if necessary and validate the size. Note that
+ the minimum is DBX_STRINGTAB_SIZE_SIZE. If we just read some
+ random data that happened to be at STRING_TABLE_OFFSET, because
+ bfd can't tell us there is no string table, the sanity checks may
+ or may not catch this. */
+ DBX_STRINGTAB_SIZE (objfile) = bfd_h_get_32 (sym_bfd, size_temp);
+
+ if (DBX_STRINGTAB_SIZE (objfile) < sizeof (size_temp)
+ || DBX_STRINGTAB_SIZE (objfile) > bfd_get_size (sym_bfd))
+ error ("ridiculous string table size (%d bytes).",
+ DBX_STRINGTAB_SIZE (objfile));
+
+ DBX_STRINGTAB (objfile) =
+ (char *) obstack_alloc (&objfile -> psymbol_obstack,
+ DBX_STRINGTAB_SIZE (objfile));
+
+ /* Now read in the string table in one big gulp. */
+
+ val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, SEEK_SET);
+ if (val < 0)
+ perror_with_name (name);
+ val = bfd_read (DBX_STRINGTAB (objfile), DBX_STRINGTAB_SIZE (objfile), 1,
+ sym_bfd);
+ if (val != DBX_STRINGTAB_SIZE (objfile))
+ perror_with_name (name);
+ }
+ }
}
/* Perform any local cleanups required when we are done with a particular
dbx_symfile_finish (objfile)
struct objfile *objfile;
{
- if (objfile->sym_private != NULL)
+ if (objfile->sym_stab_info != NULL)
{
- mfree (objfile -> md, objfile->sym_private);
+ mfree (objfile -> md, objfile->sym_stab_info);
}
free_header_files ();
}
symbuf_end = nbytes / symbol_size;
symbuf_idx = 0;
}
-#ifdef GDB_TARGET_IS_HPPA
-/* same as above for the HP symbol table */
-
-static struct symbol_dictionary_record hp_symbuf[4096];
-static int hp_symbuf_idx;
-static int hp_symbuf_end;
-
-static int
-fill_hp_symbuf (sym_bfd)
- bfd *sym_bfd;
-{
- int nbytes = bfd_read ((PTR)hp_symbuf, sizeof (hp_symbuf), 1, sym_bfd);
- if (nbytes <= 0)
- error ("error or end of file reading symbol table");
- hp_symbuf_end = nbytes / sizeof (struct symbol_dictionary_record);
- hp_symbuf_idx = 0;
- return 1;
-}
-#endif
#define SWAP_SYMBOL(symp, abfd) \
{ \
/* Current best guess is that there are approximately a twentieth
of the total symbols (in a debugging file) are global or static
oriented symbols */
-#ifdef GDB_TARGET_IS_HPPA
- objfile -> global_psymbols.size = (DBX_SYMCOUNT (objfile) +
- HP_SYMCOUNT (objfile)) / 10;
- objfile -> static_psymbols.size = (DBX_SYMCOUNT (objfile) +
- HP_SYMCOUNT (objfile)) / 10;
-#else
objfile -> global_psymbols.size = DBX_SYMCOUNT (objfile) / 10;
objfile -> static_psymbols.size = DBX_SYMCOUNT (objfile) / 10;
-#endif
objfile -> global_psymbols.next = objfile -> global_psymbols.list = (struct partial_symbol *)
xmmalloc (objfile -> md, objfile -> global_psymbols.size * sizeof (struct partial_symbol));
objfile -> static_psymbols.next = objfile -> static_psymbols.list = (struct partial_symbol *)
int nsl;
int past_first_source_file = 0;
CORE_ADDR last_o_file_start = 0;
- struct cleanup *old_chain;
+ struct cleanup *back_to;
bfd *abfd;
-#ifdef GDB_TARGET_IS_HPPA
- /* HP stuff */
- struct symbol_dictionary_record *hp_bufp;
- int hp_symnum;
- /* A hack: the first text symbol in the debugging library */
- int dbsubc_addr = 0;
-#endif
-
/* End of the text segment of the executable file. */
CORE_ADDR end_of_text_addr;
file_string_table_offset = 0;
next_file_string_table_offset = 0;
-#ifdef GDB_TARGET_IS_HPPA
- stringtab_global = HP_STRINGTAB (objfile);
-#else
stringtab_global = DBX_STRINGTAB (objfile);
-#endif
pst = (struct partial_symtab *) 0;
(struct partial_symtab **) alloca (dependencies_allocated *
sizeof (struct partial_symtab *));
- old_chain = make_cleanup (free_objfile, objfile);
-
/* Init bincl list */
init_bincl_list (20, objfile);
- make_cleanup (free_bincl_list, objfile);
+ back_to = make_cleanup (free_bincl_list, objfile);
last_source_file = NULL;
symbuf_end = symbuf_idx = 0;
next_symbol_text_func = dbx_next_symbol_text;
-#ifdef GDB_TARGET_IS_HPPA
- /* On pa machines, the global symbols are all in the regular HP-UX
- symbol table. Read them in first. */
-
- hp_symbuf_end = hp_symbuf_idx = 0;
- bfd_seek (abfd, HP_SYMTAB_OFFSET (objfile), L_SET);
-
- for (hp_symnum = 0; hp_symnum < HP_SYMCOUNT (objfile); hp_symnum++)
- {
- int dbx_type;
-
- QUIT;
- if (hp_symbuf_idx == hp_symbuf_end)
- fill_hp_symbuf (abfd);
- hp_bufp = &hp_symbuf[hp_symbuf_idx++];
- switch (hp_bufp->symbol_type)
- {
- case ST_SYM_EXT:
- case ST_ARG_EXT:
- continue;
- case ST_CODE:
- case ST_PRI_PROG:
- case ST_SEC_PROG:
- case ST_ENTRY:
- case ST_MILLICODE:
- dbx_type = N_TEXT;
- hp_bufp->symbol_value &= ~3; /* clear out permission bits */
- break;
- case ST_DATA:
- dbx_type = N_DATA;
- break;
-#ifdef KERNELDEBUG
- case ST_ABSOLUTE:
- {
- extern int kernel_debugging;
- if (!kernel_debugging)
- continue;
- dbx_type = N_ABS;
- break;
- }
-#endif
- default:
- continue;
- }
- /* Use the address of dbsubc to finish the last psymtab. */
- if (hp_bufp->symbol_type == ST_CODE &&
- HP_STRINGTAB (objfile)[hp_bufp->name.n_strx] == '_' &&
- STREQ (HP_STRINGTAB (objfile) + hp_bufp->name.n_strx, "_dbsubc"))
- dbsubc_addr = hp_bufp->symbol_value;
- if (hp_bufp->symbol_scope == SS_UNIVERSAL)
- {
- if (hp_bufp->name.n_strx > HP_STRINGTAB_SIZE (objfile))
- error ("Invalid symbol data; bad HP string table offset: %d",
- hp_bufp->name.n_strx);
- /* A hack, but gets the job done. */
- if (STREQ (hp_bufp->name.n_strx + HP_STRINGTAB (objfile),
- "$START$"))
- objfile -> ei.entry_file_lowpc = hp_bufp->symbol_value;
- if (STREQ (hp_bufp->name.n_strx + HP_STRINGTAB (objfile),
- "_sr4export"))
- objfile -> ei.entry_file_highpc = hp_bufp->symbol_value;
- record_minimal_symbol (hp_bufp->name.n_strx + HP_STRINGTAB (objfile),
- hp_bufp->symbol_value, dbx_type | N_EXT,
- objfile);
- }
- }
- bfd_seek (abfd, DBX_SYMTAB_OFFSET (objfile), L_SET);
-#endif
-
for (symnum = 0; symnum < DBX_SYMCOUNT (objfile); symnum++)
{
/* Get the symbol for this run and pull out some info */
}
/* If there's stuff to be cleaned up, clean it up. */
-#ifndef GDB_TARGET_IS_HPPA
if (DBX_SYMCOUNT (objfile) > 0 /* We have some syms */
/*FIXME, does this have a bug at start address 0? */
&& last_o_file_start
objfile -> ei.entry_file_lowpc = last_o_file_start;
objfile -> ei.entry_file_highpc = bufp->n_value;
}
-#endif
if (pst)
{
-#ifdef GDB_TARGET_IS_HPPA
- end_psymtab (pst, psymtab_include_list, includes_used,
- symnum * symbol_size, dbsubc_addr,
- dependency_list, dependencies_used);
-#else
end_psymtab (pst, psymtab_include_list, includes_used,
symnum * symbol_size, end_of_text_addr,
dependency_list, dependencies_used);
-#endif
}
- free_bincl_list (objfile);
- discard_cleanups (old_chain);
+ do_cleanups (back_to);
}
/* Allocate and partially fill a partial symtab. It will be
return result;
}
-/* Close off the current usage of a partial_symbol table entry. This
- involves setting the correct number of includes (with a realloc),
- setting the high text mark, setting the symbol length in the
- executable, and setting the length of the global and static lists
- of psymbols.
-
- The global symbols and static symbols are then seperately sorted.
+/* Close off the current usage of PST.
+ Returns PST or NULL if the partial symtab was empty and thrown away.
- Then the partial symtab is put on the global list.
- *** List variables and peculiarities of same. ***
- */
+ FIXME: List variables and peculiarities of same. */
-void
+struct partial_symtab *
end_psymtab (pst, include_list, num_includes, capping_symbol_offset,
capping_text, dependency_list, number_dependencies)
struct partial_symtab *pst;
if (minsym) {
pst->texthigh = SYMBOL_VALUE_ADDRESS (minsym) +
- (int) MSYMBOL_INFO (minsym);
+ (long) MSYMBOL_INFO (minsym);
} else {
/* This file ends with a static function, and it's
difficult to imagine how hard it would be to track down
subpst->readin = 0;
subpst->symtab = 0;
- subpst->read_symtab = dbx_psymtab_to_symtab;
+ subpst->read_symtab = pst->read_symtab;
}
sort_pst_symbols (pst);
pst->next = pst->objfile->free_psymtabs;
pst->objfile->free_psymtabs = pst;
+
+ /* Indicate that psymtab was thrown away. */
+ pst = (struct partial_symtab *)NULL;
}
+ return pst;
}
\f
static void
buildsym_init ();
old_chain = make_cleanup (really_free_pendings, 0);
file_string_table_offset = FILE_STRING_OFFSET (pst);
-#ifdef GDB_TARGET_IS_HPPA
- symbol_size = obj_dbx_symbol_entry_size (pst->objfile->obfd);
-#else
symbol_size = SYMBOL_SIZE (pst);
-#endif
/* Read in this file's symbols */
- bfd_seek (pst->objfile->obfd, SYMBOL_OFFSET (pst), L_SET);
- pst->symtab =
- read_ofile_symtab (pst->objfile, LDSYMOFF(pst), LDSYMLEN(pst),
- pst->textlow, pst->texthigh - pst->textlow,
- pst->section_offsets);
+ bfd_seek (pst->objfile->obfd, SYMBOL_OFFSET (pst), SEEK_SET);
+ read_ofile_symtab (pst);
sort_symtab_syms (pst->symtab);
do_cleanups (old_chain);
}
}
-/* Read in a defined section of a specific object file's symbols.
+/* Read in a defined section of a specific object file's symbols. */
- DESC is the file descriptor for the file, positioned at the
- beginning of the symtab
- SYM_OFFSET is the offset within the file of
- the beginning of the symbols we want to read
- SYM_SIZE is the size of the symbol info to read in.
- TEXT_OFFSET is the beginning of the text segment we are reading symbols for
- TEXT_SIZE is the size of the text segment read in.
- SECTION_OFFSETS are the relocation offsets which get added to each symbol. */
-
-static struct symtab *
-read_ofile_symtab (objfile, sym_offset, sym_size, text_offset, text_size,
- section_offsets)
- struct objfile *objfile;
- int sym_offset;
- int sym_size;
- CORE_ADDR text_offset;
- int text_size;
- struct section_offsets *section_offsets;
+static void
+read_ofile_symtab (pst)
+ struct partial_symtab *pst;
{
register char *namestring;
register struct internal_nlist *bufp;
unsigned char type;
unsigned max_symnum;
register bfd *abfd;
- struct symtab *rtn;
+ struct objfile *objfile;
+ int sym_offset; /* Offset to start of symbols to read */
+ int sym_size; /* Size of symbols to read */
+ CORE_ADDR text_offset; /* Start of text segment for symbols */
+ int text_size; /* Size of text segment for symbols */
+ struct section_offsets *section_offsets;
+
+ objfile = pst->objfile;
+ sym_offset = LDSYMOFF(pst);
+ sym_size = LDSYMLEN(pst);
+ text_offset = pst->textlow;
+ text_size = pst->texthigh - pst->textlow;
+ section_offsets = pst->section_offsets;
current_objfile = objfile;
subfile_stack = NULL;
-#ifdef GDB_TARGET_IS_HPPA
- stringtab_global = HP_STRINGTAB (objfile);
-#else
stringtab_global = DBX_STRINGTAB (objfile);
-#endif
last_source_file = NULL;
abfd = objfile->obfd;
would slow down initial readin, so we look for it here instead. */
if (!processing_acc_compilation && sym_offset >= (int)symbol_size)
{
- bfd_seek (symfile_bfd, sym_offset - symbol_size, L_INCR);
+ bfd_seek (symfile_bfd, sym_offset - symbol_size, SEEK_CUR);
fill_symbuf (abfd);
bufp = &symbuf[symbuf_idx++];
SWAP_SYMBOL (bufp, abfd);
if (processing_gcc_compilation)
{
-#if 1 /* Works, but is experimental. -fnf */
if (AUTO_DEMANGLING)
{
set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
}
-#endif
}
}
else
/* The N_SO starting this symtab is the first symbol, so we
better not check the symbol before it. I'm not this can
happen, but it doesn't hurt to check for it. */
- bfd_seek (symfile_bfd, sym_offset, L_INCR);
+ bfd_seek (symfile_bfd, sym_offset, SEEK_CUR);
processing_gcc_compilation = 0;
}
else if (STREQ (namestring, GCC2_COMPILED_FLAG_SYMBOL))
processing_gcc_compilation = 2;
-#if 1 /* Works, but is experimental. -fnf */
if (AUTO_DEMANGLING)
{
set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
}
-#endif
}
else if (type & N_EXT || type == (unsigned char)N_TEXT
|| type == (unsigned char)N_NBTEXT
if (last_source_start_addr == 0)
last_source_start_addr = text_offset;
- rtn = end_symtab (text_offset + text_size, 0, 0, objfile);
+ pst->symtab = end_symtab (text_offset + text_size, 0, 0, objfile,
+ SECT_OFF_TEXT);
end_stabs ();
- return (rtn);
}
+
\f
/* This handles a single symbol from the symbol-file, building symbols
into a GDB symtab. It takes these arguments and an implicit argument.
struct section_offsets *section_offsets;
struct objfile *objfile;
{
-#ifndef SUN_FIXED_LBRAC_BUG
+#ifdef SUN_FIXED_LBRAC_BUG
+ /* If SUN_FIXED_LBRAC_BUG is defined, then it tells us whether we need
+ to correct the address of N_LBRAC's. If it is not defined, then
+ we never need to correct the addresses. */
+
/* This records the last pc address we've seen. We depend on there being
an SLINE or FUN or SO before the first LBRAC, since the variable does
not get reset in between reads of different symbol files. */
static CORE_ADDR last_pc_address;
#endif
+
register struct context_stack *new;
/* This remembers the address of the start of a function. It is used
because in Solaris 2, N_LBRAC, N_RBRAC, and N_SLINE entries are
other than Solaris 2, this just holds the SECT_OFF_TEXT value, and is
used to relocate these symbol types rather than SECTION_OFFSETS. */
static CORE_ADDR function_start_offset;
- char *colon_pos;
-#ifndef BLOCK_ADDRESS_FUNCTION_RELATIVE
- /* N_LBRAC, N_RBRAC and N_SLINE entries are not relative to the
- function start address, so just use the text offset. */
- function_start_offset = ANOFFSET (section_offsets, SECT_OFF_TEXT);
-#endif
+ /* If this is nonzero, N_LBRAC, N_RBRAC, and N_SLINE entries are relative
+ to the function start address. */
+ int block_address_function_relative;
+
+ /* If this is nonzero, we've seen a non-gcc N_OPT symbol for this source
+ file. Used to detect the SunPRO solaris compiler. */
+ int n_opt_found;
+
+ /* The stab type used for the definition of the last function.
+ N_STSYM or N_GSYM for SunOS4 acc; N_FUN for other compilers. */
+ static int function_stab_type = 0;
+
+ /* This is true for Solaris (and all other stabs-in-elf systems, hopefully,
+ since it would be silly to do things differently from Solaris), and
+ false for SunOS4 and other a.out file formats. */
+ block_address_function_relative =
+ 0 == strncmp (bfd_get_target (objfile->obfd), "elf", 3);
+
+ if (!block_address_function_relative)
+ /* N_LBRAC, N_RBRAC and N_SLINE entries are not relative to the
+ function start address, so just use the text offset. */
+ function_start_offset = ANOFFSET (section_offsets, SECT_OFF_TEXT);
/* Something is wrong if we see real data before
seeing a source file name. */
if (last_source_file == NULL && type != (unsigned char)N_SO)
{
- /* Currently this ignores N_ENTRY on Gould machines, N_NSYM on machines
- where that code is defined. */
- if (IGNORE_SYMBOL (type))
- return;
-
- /* FIXME, this should not be an error, since it precludes extending
- the symbol table information in this way... */
- error ("Invalid symbol data: does not start by identifying a source file.");
+ /* Ignore any symbols which appear before an N_SO symbol. Currently
+ no one puts symbols there, but we should deal gracefully with the
+ case. A complain()t might be in order (if !IGNORE_SYMBOL (type)),
+ but this should not be an error (). */
+ return;
}
switch (type)
{
case N_FUN:
case N_FNAME:
-#if 0
-/* It seems that the Sun ANSI C compiler (acc) replaces N_FUN with N_GSYM and
- N_STSYM with a type code of f or F. Can't enable this until we get some
- stuff straightened out with psymtabs. FIXME. */
-
- case N_GSYM:
- case N_STSYM:
-#endif /* 0 */
-
/* Relocate for dynamic loading */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
-
- /* Either of these types of symbols indicates the start of
- a new function. We must process its "name" normally for dbx,
- but also record the start of a new lexical context, and possibly
- also the end of the lexical context for the previous function. */
- /* This is not always true. This type of symbol may indicate a
- text segment variable. */
-
- colon_pos = strchr (name, ':');
- if (!colon_pos++
- || (*colon_pos != 'f' && *colon_pos != 'F'))
- {
- define_symbol (valu, name, desc, type, objfile);
- break;
- }
-
-#ifndef SUN_FIXED_LBRAC_BUG
- last_pc_address = valu; /* Save for SunOS bug circumcision */
-#endif
-
-#ifdef BLOCK_ADDRESS_FUNCTION_RELATIVE
- /* On Solaris 2.0 compilers, the block addresses and N_SLINE's
- are relative to the start of the function. On normal systems,
- and when using gcc on Solaris 2.0, these addresses are just
- absolute, or relative to the N_SO, depending on
- BLOCK_ADDRESS_ABSOLUTE. */
- function_start_offset = valu;
-#endif
-
- within_function = 1;
- if (context_stack_depth > 0)
- {
- new = pop_context ();
- /* Make a block for the local symbols within. */
- finish_block (new->name, &local_symbols, new->old_blocks,
- new->start_addr, valu, objfile);
- }
- /* Stack must be empty now. */
- if (context_stack_depth != 0)
- complain (&lbrac_unmatched_complaint, symnum);
-
- new = push_context (0, valu);
- new->name = define_symbol (valu, name, desc, type, objfile);
- break;
+ goto define_a_symbol;
case N_LBRAC:
/* This "symbol" just indicates the start of an inner lexical
context within a function. */
-#if defined(BLOCK_ADDRESS_ABSOLUTE) || defined(BLOCK_ADDRESS_FUNCTION_RELATIVE)
- /* Relocate for dynamic loading and Sun ELF acc fn-relative syms. */
+#if defined(BLOCK_ADDRESS_ABSOLUTE)
+ /* Relocate for dynamic loading (?). */
valu += function_start_offset;
#else
- /* On most machines, the block addresses are relative to the
- N_SO, the linker did not relocate them (sigh). */
- valu += last_source_start_addr;
+ if (block_address_function_relative)
+ /* Relocate for Sun ELF acc fn-relative syms. */
+ valu += function_start_offset;
+ else
+ /* On most machines, the block addresses are relative to the
+ N_SO, the linker did not relocate them (sigh). */
+ valu += last_source_start_addr;
#endif
-#ifndef SUN_FIXED_LBRAC_BUG
- if (valu < last_pc_address) {
+#ifdef SUN_FIXED_LBRAC_BUG
+ if (!SUN_FIXED_LBRAC_BUG && valu < last_pc_address) {
/* Patch current LBRAC pc value to match last handy pc value */
complain (&lbrac_complaint);
valu = last_pc_address;
/* This "symbol" just indicates the end of an inner lexical
context that was started with N_LBRAC. */
-#if defined(BLOCK_ADDRESS_ABSOLUTE) || defined(BLOCK_ADDRESS_FUNCTION_RELATIVE)
- /* Relocate for dynamic loading and Sun ELF acc fn-relative syms. */
+#if defined(BLOCK_ADDRESS_ABSOLUTE)
+ /* Relocate for dynamic loading (?). */
valu += function_start_offset;
#else
- /* On most machines, the block addresses are relative to the
- N_SO, the linker did not relocate them (sigh). */
- valu += last_source_start_addr;
+ if (block_address_function_relative)
+ /* Relocate for Sun ELF acc fn-relative syms. */
+ valu += function_start_offset;
+ else
+ /* On most machines, the block addresses are relative to the
+ N_SO, the linker did not relocate them (sigh). */
+ valu += last_source_start_addr;
#endif
new = pop_context();
/* Relocate for dynamic loading */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
-#ifndef SUN_FIXED_LBRAC_BUG
+ n_opt_found = 0;
+
+#ifdef SUN_FIXED_LBRAC_BUG
last_pc_address = valu; /* Save for SunOS bug circumcision */
#endif
-
+
#ifdef PCC_SOL_BROKEN
/* pcc bug, occasionally puts out SO for SOL. */
if (context_stack_depth > 0)
sanity checks). If so, that one was actually the directory
name, and the current one is the real file name.
Patch things up. */
- if (previous_stab_code == N_SO)
+ if (previous_stab_code == (unsigned char) N_SO)
{
patch_subfile_names (current_subfile, name);
break; /* Ignore repeated SOs */
}
- end_symtab (valu, 0, 0, objfile);
+ end_symtab (valu, 0, 0, objfile, SECT_OFF_TEXT);
end_stabs ();
}
start_stabs ();
Enter it in the line list for this symbol table. */
/* Relocate for dynamic loading and for ELF acc fn-relative syms. */
valu += function_start_offset;
-#ifndef SUN_FIXED_LBRAC_BUG
+#ifdef SUN_FIXED_LBRAC_BUG
last_pc_address = valu; /* Save for SunOS bug circumcision */
#endif
record_line (current_subfile, desc, valu);
case N_BCOMM:
if (common_block)
- error ("Invalid symbol data: common within common at symtab pos %d",
- symnum);
+ {
+ /* Note: this does not detect nesting if the previous N_BCOMM
+ was at the beginning of a scope (and thus common_block was
+ NULL). Not necessarily worth worrying about unless we run
+ into a compiler which actually has this bug. */
+ static struct complaint msg = {
+ "Invalid symbol data: common within common at symtab pos %d",
+ 0, 0};
+ complain (&msg, symnum);
+ }
common_block = local_symbols;
common_block_i = local_symbols ? local_symbols->nsyms : 0;
break;
case N_ECOMM:
+
/* Symbols declared since the BCOMM are to have the common block
- start address added in when we know it. common_block points to
- the first symbol after the BCOMM in the local_symbols list;
- copy the list and hang it off the symbol for the common block name
- for later fixup. */
+ start address added in when we know it. common_block and
+ common_block_i point to the first symbol after the BCOMM in
+ the local_symbols list; copy the list and hang it off the
+ symbol for the common block name for later fixup. */
+
+ /* If there is a N_ECOMM unmatched by a N_BCOMM, we treat all
+ the local_symbols as part of the common block. It might be
+ better to just ignore the N_ECOMM, but then we'd need to
+ distinguish between a N_BCOMM at the start of a scope, or no
+ N_BCOMM at all (currently they both have common_block NULL).
+ Not necessarily worth worrying about unless we run into a
+ compiler which actually has this bug. */
+
{
int i;
struct symbol *sym =
.stab "foo:V...",N_STSYM is relative (section base subtracted).
This leaves us no choice but to search for the 'S' or 'V'...
(or pass the whole section_offsets stuff down ONE MORE function
- call level, which we really don't want to do). */
+ call level, which we really don't want to do).
+
+ The above is indeed true for Solaris 2.1. I'm not sure what
+ happens in Solaris 2.3, in which ld stops relocating stabs. */
{
char *p;
p = strchr (name, ':');
{
/* FIXME! We relocate it by the TEXT offset, in case the
whole module moved in memory. But this is wrong, since
- the sections can side around independently. */
+ the sections can side around independently. (I suspect that
+ the text offset is always zero anyway--elfread.c doesn't
+ process (and Sun cc doesn't produce) Ttext.text symbols). */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
goto define_a_symbol;
}
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
goto define_a_symbol;
+ /* The following symbol types we don't know how to process. Handle
+ them in a "default" way, but complain to people who care. */
+ default:
+ case N_CATCH: /* Exception handler catcher */
+ case N_EHDECL: /* Exception handler name */
+ case N_PC: /* Global symbol in Pascal */
+ case N_M2C: /* Modula-2 compilation unit */
+ /* N_MOD2: overlaps with N_EHDECL */
+ case N_SCOPE: /* Modula-2 scope information */
+ case N_ECOML: /* End common (local name) */
+ case N_NBTEXT: /* Gould Non-Base-Register symbols??? */
+ case N_NBDATA:
+ case N_NBBSS:
+ case N_NBSTS:
+ case N_NBLCS:
+ complain (&unknown_symtype_complaint,
+ local_hex_string((unsigned long) type));
+ /* FALLTHROUGH */
+
/* The following symbol types don't need the address field relocated,
since it is either unused, or is absolute. */
define_a_symbol:
case N_PSYM: /* Parameter variable */
case N_LENG: /* Length of preceding symbol type */
if (name)
- define_symbol (valu, name, desc, type, objfile);
+ {
+ int deftype;
+ char *colon_pos = strchr (name, ':');
+ if (colon_pos == NULL)
+ deftype = '\0';
+ else
+ deftype = colon_pos[1];
+
+ switch (deftype)
+ {
+ case 'f':
+ case 'F':
+ function_stab_type = type;
+
+#ifdef SUN_FIXED_LBRAC_BUG
+ /* The Sun acc compiler, under SunOS4, puts out
+ functions with N_GSYM or N_STSYM. The problem is
+ that the address of the symbol is no good (for N_GSYM
+ it doesn't even attept an address; for N_STSYM it
+ puts out an address but then it gets relocated
+ relative to the data segment, not the text segment).
+ Currently we can't fix this up later as we do for
+ some types of symbol in scan_file_globals.
+ Fortunately we do have a way of finding the address -
+ we know that the value in last_pc_address is either
+ the one we want (if we're dealing with the first
+ function in an object file), or somewhere in the
+ previous function. This means that we can use the
+ minimal symbol table to get the address. */
+
+ /* On solaris up to 2.2, the N_FUN stab gets relocated.
+ On Solaris 2.3, ld no longer relocates stabs (which
+ is good), and the N_FUN's value is now always zero.
+ The following code can't deal with this, because
+ last_pc_address depends on getting the address from a
+ N_SLINE or some such and in Solaris those are function
+ relative. Best fix is probably to create a Ttext.text symbol
+ and handle this like Ddata.data and so on. */
+
+ if (type == N_GSYM || type == N_STSYM)
+ {
+ struct minimal_symbol *m;
+ int l = colon_pos - name;
+
+ m = lookup_minimal_symbol_by_pc (last_pc_address);
+ if (m && STREQN (SYMBOL_NAME (m), name, l))
+ /* last_pc_address was in this function */
+ valu = SYMBOL_VALUE (m);
+ else if (m && STREQN (SYMBOL_NAME (m+1), name, l))
+ /* last_pc_address was in last function */
+ valu = SYMBOL_VALUE (m+1);
+ else
+ /* Not found - use last_pc_address (for finish_block) */
+ valu = last_pc_address;
+ }
+
+ last_pc_address = valu; /* Save for SunOS bug circumcision */
+#endif
+
+ if (block_address_function_relative)
+ /* For Solaris 2.0 compilers, the block addresses and
+ N_SLINE's are relative to the start of the
+ function. On normal systems, and when using gcc on
+ Solaris 2.0, these addresses are just absolute, or
+ relative to the N_SO, depending on
+ BLOCK_ADDRESS_ABSOLUTE. */
+ function_start_offset = valu;
+
+ within_function = 1;
+ if (context_stack_depth > 0)
+ {
+ new = pop_context ();
+ /* Make a block for the local symbols within. */
+ finish_block (new->name, &local_symbols, new->old_blocks,
+ new->start_addr, valu, objfile);
+ }
+ /* Stack must be empty now. */
+ if (context_stack_depth != 0)
+ complain (&lbrac_unmatched_complaint, symnum);
+
+ new = push_context (0, valu);
+ new->name = define_symbol (valu, name, desc, type, objfile);
+ break;
+
+ default:
+ define_symbol (valu, name, desc, type, objfile);
+ break;
+ }
+ }
break;
/* We use N_OPT to carry the gcc2_compiled flag. Sun uses it
}
#endif
}
+ else
+ n_opt_found = 1;
}
break;
case N_ENDM: /* Solaris 2: End of module */
case N_MAIN: /* Name of main routine. */
break;
-
- /* The following symbol types we don't know how to process. Handle
- them in a "default" way, but complain to people who care. */
- default:
- case N_CATCH: /* Exception handler catcher */
- case N_EHDECL: /* Exception handler name */
- case N_PC: /* Global symbol in Pascal */
- case N_M2C: /* Modula-2 compilation unit */
- /* N_MOD2: overlaps with N_EHDECL */
- case N_SCOPE: /* Modula-2 scope information */
- case N_ECOML: /* End common (local name) */
- case N_NBTEXT: /* Gould Non-Base-Register symbols??? */
- case N_NBDATA:
- case N_NBBSS:
- case N_NBSTS:
- case N_NBLCS:
- complain (&unknown_symtype_complaint, local_hex_string(type));
- if (name)
- define_symbol (valu, name, desc, type, objfile);
}
previous_stab_code = type;
}
\f
/* Copy a pending list, used to record the contents of a common
- block for later fixup. */
+ block for later fixup. We copy the symbols starting with all
+ symbols in BEG, and ending with the symbols which are in
+ END at index ENDI. */
static struct pending *
-copy_pending (beg, begi, end)
+copy_pending (beg, endi, end)
struct pending *beg;
- int begi;
+ int endi;
struct pending *end;
{
struct pending *new = 0;
struct pending *next;
+ int j;
- for (next = beg; next != 0 && (next != end || begi < end->nsyms);
- next = next->next, begi = 0)
+ /* Copy all the struct pendings before end. */
+ for (next = beg; next != NULL && next != end; next = next->next)
{
- register int j;
- for (j = begi; j < next->nsyms; j++)
+ for (j = 0; j < next->nsyms; j++)
add_symbol_to_list (next->symbol[j], &new);
}
+
+ /* Copy however much of END we need. If END is NULL, it means copy
+ all the local symbols (which we already did above). */
+ if (end != NULL)
+ for (j = endi; j < end->nsyms; j++)
+ add_symbol_to_list (end->symbol[j], &new);
+
return new;
}
\f
+/* FIXME: The only difference between this and elfstab_build_psymtabs is
+ the call to install_minimal_symbols for elf. If the differences are
+ really that small, the code should be shared. */
+
+/* Scan and build partial symbols for an coff symbol file.
+ The coff file has already been processed to get its minimal symbols.
+
+ This routine is the equivalent of dbx_symfile_init and dbx_symfile_read
+ rolled into one.
+
+ OBJFILE is the object file we are reading symbols from.
+ ADDR is the address relative to which the symbols are (e.g.
+ the base address of the text segment).
+ MAINLINE is true if we are reading the main symbol
+ table (as opposed to a shared lib or dynamically loaded file).
+ STABOFFSET and STABSIZE define the location in OBJFILE where the .stab
+ section exists.
+ STABSTROFFSET and STABSTRSIZE define the location in OBJFILE where the
+ .stabstr section exists.
+
+ This routine is mostly copied from dbx_symfile_init and dbx_symfile_read,
+ adjusted for coff details. */
+
+void
+coffstab_build_psymtabs (objfile, section_offsets, mainline,
+ staboffset, stabsize,
+ stabstroffset, stabstrsize)
+ struct objfile *objfile;
+ struct section_offsets *section_offsets;
+ int mainline;
+ file_ptr staboffset;
+ unsigned int stabsize;
+ file_ptr stabstroffset;
+ unsigned int stabstrsize;
+{
+ int val;
+ bfd *sym_bfd = objfile->obfd;
+ char *name = bfd_get_filename (sym_bfd);
+ struct dbx_symfile_info *info;
+
+ /* There is already a dbx_symfile_info allocated by our caller.
+ It might even contain some info from the coff symtab to help us. */
+ info = (struct dbx_symfile_info *) objfile->sym_stab_info;
+
+ DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
+ if (!DBX_TEXT_SECT (objfile))
+ error ("Can't find .text section in symbol file");
+
+#define COFF_STABS_SYMBOL_SIZE 12 /* XXX FIXME XXX */
+ DBX_SYMBOL_SIZE (objfile) = COFF_STABS_SYMBOL_SIZE;
+ DBX_SYMCOUNT (objfile) = stabsize / DBX_SYMBOL_SIZE (objfile);
+ DBX_STRINGTAB_SIZE (objfile) = stabstrsize;
+ DBX_SYMTAB_OFFSET (objfile) = staboffset;
+
+ if (stabstrsize > bfd_get_size (sym_bfd))
+ error ("ridiculous string table size: %d bytes", stabstrsize);
+ DBX_STRINGTAB (objfile) = (char *)
+ obstack_alloc (&objfile->psymbol_obstack, stabstrsize+1);
+
+ /* Now read in the string table in one big gulp. */
+
+ val = bfd_seek (sym_bfd, stabstroffset, SEEK_SET);
+ if (val < 0)
+ perror_with_name (name);
+ val = bfd_read (DBX_STRINGTAB (objfile), stabstrsize, 1, sym_bfd);
+ if (val != stabstrsize)
+ perror_with_name (name);
+
+ stabsread_new_init ();
+ buildsym_new_init ();
+ free_header_files ();
+ init_header_files ();
+
+ processing_acc_compilation = 1;
+
+ /* In a coff file, we've already installed the minimal symbols that came
+ from the coff (non-stab) symbol table, so always act like an
+ incremental load here. */
+ dbx_symfile_read (objfile, section_offsets, 0);
+}
+\f
/* Scan and build partial symbols for an ELF symbol file.
This ELF file has already been processed to get its minimal symbols,
and any DWARF symbols that were in it.
/* There is already a dbx_symfile_info allocated by our caller.
It might even contain some info from the ELF symtab to help us. */
- info = (struct dbx_symfile_info *) objfile->sym_private;
+ info = (struct dbx_symfile_info *) objfile->sym_stab_info;
DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
if (!DBX_TEXT_SECT (objfile))
DBX_STRINGTAB_SIZE (objfile) = stabstrsize;
DBX_SYMTAB_OFFSET (objfile) = staboffset;
- if (stabstrsize < 0) /* FIXME: stabstrsize is unsigned; never true! */
+ if (stabstrsize > bfd_get_size (sym_bfd))
error ("ridiculous string table size: %d bytes", stabstrsize);
DBX_STRINGTAB (objfile) = (char *)
obstack_alloc (&objfile->psymbol_obstack, stabstrsize+1);
/* Now read in the string table in one big gulp. */
- val = bfd_seek (sym_bfd, stabstroffset, L_SET);
+ val = bfd_seek (sym_bfd, stabstroffset, SEEK_SET);
if (val < 0)
perror_with_name (name);
val = bfd_read (DBX_STRINGTAB (objfile), stabstrsize, 1, sym_bfd);
dbx_symfile_read (objfile, section_offsets, 0);
}
\f
+/* Scan and build partial symbols for a PA symbol file.
+ This PA file has already been processed to get its minimal symbols.
+
+ OBJFILE is the object file we are reading symbols from.
+ ADDR is the address relative to which the symbols are (e.g.
+ the base address of the text segment).
+ MAINLINE is true if we are reading the main symbol
+ table (as opposed to a shared lib or dynamically loaded file).
+
+ */
+
+void
+pastab_build_psymtabs (objfile, section_offsets, mainline)
+ struct objfile *objfile;
+ struct section_offsets *section_offsets;
+ int mainline;
+{
+ free_header_files ();
+ init_header_files ();
+
+ /* In a PA file, we've already installed the minimal symbols that came
+ from the PA (non-stab) symbol table, so always act like an
+ incremental load here. */
+
+ dbx_symfile_read (objfile, section_offsets, mainline);
+}
+\f
/* Parse the user's idea of an offset for dynamic linking, into our idea
of how to represent it for fast symbol reading. */
-struct section_offsets *
+static struct section_offsets *
dbx_symfile_offsets (objfile, addr)
struct objfile *objfile;
CORE_ADDR addr;
}
\f
/* Register our willingness to decode symbols for SunOS and a.out and
- b.out files handled by BFD... */
+ NetBSD and b.out files handled by BFD... */
static struct sym_fns sunos_sym_fns =
{
"sunOs", /* sym_name: name or name prefix of BFD target type */
NULL /* next: pointer to next struct sym_fns */
};
-/* This is probably a mistake. FIXME. Why can't the HP's use an ordinary
- file format name with an -hppa suffix? */
-static struct sym_fns hppa_sym_fns =
-{
- "hppa", /* sym_name: name or name prefix of BFD target type */
- 4, /* sym_namelen: number of significant sym_name chars */
- dbx_new_init, /* sym_new_init: init anything gbl to entire symtab */
- dbx_symfile_init, /* sym_init: read initial info, setup for sym_read() */
- dbx_symfile_read, /* sym_read: read a symbol file into symtab */
- dbx_symfile_finish, /* sym_finish: finished with file, cleanup */
- dbx_symfile_offsets, /* sym_offsets: parse user's offsets to internal form */
- NULL /* next: pointer to next struct sym_fns */
-};
-
void
_initialize_dbxread ()
{
add_symtab_fns(&sunos_sym_fns);
add_symtab_fns(&aout_sym_fns);
add_symtab_fns(&bout_sym_fns);
- add_symtab_fns(&hppa_sym_fns);
}