/* Read dbx symbol tables and convert to internal format, for GDB.
- Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
- 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004.
- Free Software Foundation, Inc.
+ Copyright (C) 1986-2015 Free Software Foundation, Inc.
This file is part of GDB.
for real. dbx_psymtab_to_symtab() is the function that does this */
#include "defs.h"
-#include "gdb_string.h"
-
#if defined(__CYGNUSCLIB__)
#include <sys/types.h>
#include <fcntl.h>
#endif
#include "gdb_obstack.h"
-#include "gdb_stat.h"
+#include <sys/stat.h>
#include "symtab.h"
#include "breakpoint.h"
#include "target.h"
#include "gdbcore.h" /* for bfd stuff */
#include "libaout.h" /* FIXME Secret internal BFD stuff for a.out */
+#include "filenames.h"
#include "objfiles.h"
#include "buildsym.h"
#include "stabsread.h"
#include "demangle.h"
#include "complaints.h"
#include "cp-abi.h"
-
-#include "gdb_assert.h"
-#include "gdb_string.h"
+#include "cp-support.h"
+#include "psympriv.h"
+#include "block.h"
#include "aout/aout64.h"
-#include "aout/stab_gnu.h" /* We always use GNU stabs, not native, now */
+#include "aout/stab_gnu.h" /* We always use GNU stabs, not
+ native, now. */
\f
+/* Key for dbx-associated data. */
+
+const struct objfile_data *dbx_objfile_data_key;
+
/* We put a pointer to this structure in the read_symtab_private field
of the psymtab. */
#define FILE_STRING_OFFSET(p) (SYMLOC(p)->file_string_offset)
\f
-/* Remember what we deduced to be the source language of this psymtab. */
+/* The objfile we are currently reading. */
+
+static struct objfile *dbxread_objfile;
+
+/* Remember what we deduced to be the source language of this psymtab. */
static enum language psymtab_language = language_unknown;
static unsigned symbol_size;
-/* This is the offset of the symbol table in the executable file. */
+/* This is the offset of the symbol table in the executable file. */
static unsigned symbol_table_offset;
-/* This is the offset of the string table in the executable file. */
+/* This is the offset of the string table in the executable file. */
static unsigned string_table_offset;
into the string table. Instead, each .o file has a base offset in
the string table, and the associated symbols contain offsets from
this base. The following two variables contain the base offset for
- the current and next .o files. */
+ the current and next .o files. */
static unsigned int file_string_table_offset;
static unsigned int next_file_string_table_offset;
/* .o and NLM files contain unrelocated addresses which are based at
0. When non-zero, this flag disables some of the special cases for
- Solaris elf+stab text addresses at location 0. */
+ Solaris elf+stab text addresses at location 0. */
static int symfile_relocatable = 0;
static CORE_ADDR lowest_text_address;
/* Non-zero if there is any line number info in the objfile. Prevents
- end_psymtab from discarding an otherwise empty psymtab. */
+ dbx_end_psymtab from discarding an otherwise empty psymtab. */
static int has_line_numbers;
repeated_header_complaint (const char *arg1, int arg2)
{
complaint (&symfile_complaints,
- _("\"repeated\" header file %s not previously seen, at symtab \
-pos %d"),
+ _("\"repeated\" header file %s not "
+ "previously seen, at symtab pos %d"),
arg1, arg2);
}
/* During initial symbol readin, we need to have a structure to keep
track of which psymtabs have which bincls in them. This structure
is used during readin to setup the list of dependencies within each
- partial symbol table. */
+ partial symbol table. */
struct header_file_location
{
char *name; /* Name of header file */
int instance; /* See above */
struct partial_symtab *pst; /* Partial symtab that has the
- BINCL/EINCL defs for this file */
+ BINCL/EINCL defs for this file. */
};
-/* The actual list and controling variables */
+/* The actual list and controling variables. */
static struct header_file_location *bincl_list, *next_bincl;
static int bincls_allocated;
-/* Local function prototypes */
+/* Local function prototypes. */
extern void _initialize_dbxread (void);
-static void read_ofile_symtab (struct partial_symtab *);
+static void read_ofile_symtab (struct objfile *, struct partial_symtab *);
-static void dbx_psymtab_to_symtab (struct partial_symtab *);
+static void dbx_read_symtab (struct partial_symtab *self,
+ struct objfile *objfile);
-static void dbx_psymtab_to_symtab_1 (struct partial_symtab *);
+static void dbx_psymtab_to_symtab_1 (struct objfile *, struct partial_symtab *);
static void read_dbx_dynamic_symtab (struct objfile *objfile);
static void dbx_symfile_finish (struct objfile *);
-static void record_minimal_symbol (char *, CORE_ADDR, int, struct objfile *);
+static void record_minimal_symbol (const char *, CORE_ADDR, int,
+ struct objfile *);
static void add_new_header_file (char *, int);
struct partial_symbol **,
struct partial_symbol **);
-/* Free up old header file tables */
+/* Free up old header file tables. */
void
free_header_files (void)
n_allocated_this_object_header_files = 0;
}
-/* Allocate new header file tables */
+/* Allocate new header file tables. */
void
init_header_files (void)
{
n_allocated_this_object_header_files = 10;
- this_object_header_files = (int *) xmalloc (10 * sizeof (int));
+ this_object_header_files = XNEWVEC (int, 10);
}
/* Add header file number I for this object file
static void
add_old_header_file (char *name, int instance)
{
- struct header_file *p = HEADER_FILES (current_objfile);
+ struct header_file *p = HEADER_FILES (dbxread_objfile);
int i;
- for (i = 0; i < N_HEADER_FILES (current_objfile); i++)
- if (strcmp (p[i].name, name) == 0 && instance == p[i].instance)
+ for (i = 0; i < N_HEADER_FILES (dbxread_objfile); i++)
+ if (filename_cmp (p[i].name, name) == 0 && instance == p[i].instance)
{
add_this_object_header_file (i);
return;
/* Make sure there is room for one more header file. */
- i = N_ALLOCATED_HEADER_FILES (current_objfile);
+ i = N_ALLOCATED_HEADER_FILES (dbxread_objfile);
- if (N_HEADER_FILES (current_objfile) == i)
+ if (N_HEADER_FILES (dbxread_objfile) == i)
{
if (i == 0)
{
- N_ALLOCATED_HEADER_FILES (current_objfile) = 10;
- HEADER_FILES (current_objfile) = (struct header_file *)
+ N_ALLOCATED_HEADER_FILES (dbxread_objfile) = 10;
+ HEADER_FILES (dbxread_objfile) = (struct header_file *)
xmalloc (10 * sizeof (struct header_file));
}
else
{
i *= 2;
- N_ALLOCATED_HEADER_FILES (current_objfile) = i;
- HEADER_FILES (current_objfile) = (struct header_file *)
- xrealloc ((char *) HEADER_FILES (current_objfile),
+ N_ALLOCATED_HEADER_FILES (dbxread_objfile) = i;
+ HEADER_FILES (dbxread_objfile) = (struct header_file *)
+ xrealloc ((char *) HEADER_FILES (dbxread_objfile),
(i * sizeof (struct header_file)));
}
}
/* Create an entry for this header file. */
- i = N_HEADER_FILES (current_objfile)++;
- hfile = HEADER_FILES (current_objfile) + i;
- hfile->name = savestring (name, strlen (name));
+ i = N_HEADER_FILES (dbxread_objfile)++;
+ hfile = HEADER_FILES (dbxread_objfile) + i;
+ hfile->name = xstrdup (name);
hfile->instance = instance;
hfile->length = 10;
- hfile->vector
- = (struct type **) xmalloc (10 * sizeof (struct type *));
- memset (hfile->vector, 0, 10 * sizeof (struct type *));
+ hfile->vector = XCNEWVEC (struct type *, 10);
add_this_object_header_file (i);
}
static struct type **
explicit_lookup_type (int real_filenum, int index)
{
- struct header_file *f = &HEADER_FILES (current_objfile)[real_filenum];
+ struct header_file *f = &HEADER_FILES (dbxread_objfile)[real_filenum];
if (index >= f->length)
{
#endif
\f
static void
-record_minimal_symbol (char *name, CORE_ADDR address, int type,
+record_minimal_symbol (const char *name, CORE_ADDR address, int type,
struct objfile *objfile)
{
enum minimal_symbol_type ms_type;
int section;
- asection *bfd_section;
switch (type)
{
case N_TEXT | N_EXT:
ms_type = mst_text;
section = SECT_OFF_TEXT (objfile);
- bfd_section = DBX_TEXT_SECTION (objfile);
break;
case N_DATA | N_EXT:
ms_type = mst_data;
section = SECT_OFF_DATA (objfile);
- bfd_section = DBX_DATA_SECTION (objfile);
break;
case N_BSS | N_EXT:
ms_type = mst_bss;
section = SECT_OFF_BSS (objfile);
- bfd_section = DBX_BSS_SECTION (objfile);
break;
case N_ABS | N_EXT:
ms_type = mst_abs;
section = -1;
- bfd_section = NULL;
break;
#ifdef N_SETV
case N_SETV | N_EXT:
ms_type = mst_data;
section = SECT_OFF_DATA (objfile);
- bfd_section = DBX_DATA_SECTION (objfile);
break;
case N_SETV:
/* I don't think this type actually exists; since a N_SETV is the result
file local. */
ms_type = mst_file_data;
section = SECT_OFF_DATA (objfile);
- bfd_section = DBX_DATA_SECTION (objfile);
break;
#endif
case N_TEXT:
case N_FN_SEQ:
ms_type = mst_file_text;
section = SECT_OFF_TEXT (objfile);
- bfd_section = DBX_TEXT_SECTION (objfile);
break;
case N_DATA:
ms_type = mst_file_data;
/* Same with virtual function tables, both global and static. */
{
- char *tempstring = name;
+ const char *tempstring = name;
+
if (tempstring[0] == bfd_get_symbol_leading_char (objfile->obfd))
++tempstring;
if (is_vtable_name (tempstring))
ms_type = mst_data;
}
section = SECT_OFF_DATA (objfile);
- bfd_section = DBX_DATA_SECTION (objfile);
break;
case N_BSS:
ms_type = mst_file_bss;
section = SECT_OFF_BSS (objfile);
- bfd_section = DBX_BSS_SECTION (objfile);
break;
default:
ms_type = mst_unknown;
section = -1;
- bfd_section = NULL;
break;
}
lowest_text_address = address;
prim_record_minimal_symbol_and_info
- (name, address, ms_type, NULL, section, bfd_section, objfile);
+ (name, address, ms_type, section, objfile);
}
\f
/* Scan and build partial symbols for a symbol file.
We have been initialized by a call to dbx_symfile_init, which
put all the relevant info into a "struct dbx_symfile_info",
- hung off the objfile structure.
-
- MAINLINE is true if we are reading the main symbol
- table (as opposed to a shared lib or dynamically loaded file). */
+ hung off the objfile structure. */
static void
-dbx_symfile_read (struct objfile *objfile, int mainline)
+dbx_symfile_read (struct objfile *objfile, int symfile_flags)
{
bfd *sym_bfd;
int val;
differently from Solaris), and false for SunOS4 and other a.out
file formats. */
block_address_function_relative =
- ((0 == strncmp (bfd_get_target (sym_bfd), "elf", 3))
- || (0 == strncmp (bfd_get_target (sym_bfd), "som", 3))
- || (0 == strncmp (bfd_get_target (sym_bfd), "coff", 4))
- || (0 == strncmp (bfd_get_target (sym_bfd), "pe", 2))
- || (0 == strncmp (bfd_get_target (sym_bfd), "epoc-pe", 7))
- || (0 == strncmp (bfd_get_target (sym_bfd), "nlm", 3)));
+ ((startswith (bfd_get_target (sym_bfd), "elf"))
+ || (startswith (bfd_get_target (sym_bfd), "som"))
+ || (startswith (bfd_get_target (sym_bfd), "coff"))
+ || (startswith (bfd_get_target (sym_bfd), "pe"))
+ || (startswith (bfd_get_target (sym_bfd), "epoc-pe"))
+ || (startswith (bfd_get_target (sym_bfd), "nlm")));
val = bfd_seek (sym_bfd, DBX_SYMTAB_OFFSET (objfile), SEEK_SET);
if (val < 0)
- perror_with_name (objfile->name);
+ perror_with_name (objfile_name (objfile));
- /* If we are reinitializing, or if we have never loaded syms yet, init */
- if (mainline
- || (objfile->global_psymbols.size == 0
- && objfile->static_psymbols.size == 0))
+ /* Size the symbol table. */
+ if (objfile->global_psymbols.size == 0 && objfile->static_psymbols.size == 0)
init_psymbol_list (objfile, DBX_SYMCOUNT (objfile));
symbol_size = DBX_SYMBOL_SIZE (objfile);
init_minimal_symbol_collection ();
make_cleanup_discard_minimal_symbols ();
- /* Read stabs data from executable file and define symbols. */
+ /* Read stabs data from executable file and define symbols. */
read_dbx_symtab (objfile);
read_dbx_dynamic_symtab (objfile);
/* Install any minimal symbols that have been collected as the current
- minimal symbols for this objfile. */
+ minimal symbols for this objfile. */
install_minimal_symbols (objfile);
Since BFD doesn't know how to read debug symbols in a format-independent
way (and may never do so...), we have to do it ourselves. We will never
- be called unless this is an a.out (or very similar) file.
+ be called unless this is an a.out (or very similar) file.
FIXME, there should be a cleaner peephole into the BFD environment here. */
#define DBX_STRINGTAB_SIZE_SIZE sizeof(long) /* FIXME */
char *name = bfd_get_filename (sym_bfd);
asection *text_sect;
unsigned char size_temp[DBX_STRINGTAB_SIZE_SIZE];
+ struct dbx_symfile_info *dbx;
- /* Allocate struct to keep track of the symfile */
- objfile->deprecated_sym_stab_info = (struct dbx_symfile_info *)
- xmalloc (sizeof (struct dbx_symfile_info));
- memset (objfile->deprecated_sym_stab_info, 0,
- sizeof (struct dbx_symfile_info));
+ /* Allocate struct to keep track of the symfile. */
+ dbx = XCNEW (struct dbx_symfile_info);
+ set_objfile_data (objfile, dbx_objfile_data_key, dbx);
DBX_TEXT_SECTION (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
DBX_DATA_SECTION (objfile) = bfd_get_section_by_name (sym_bfd, ".data");
DBX_BSS_SECTION (objfile) = bfd_get_section_by_name (sym_bfd, ".bss");
- /* FIXME POKING INSIDE BFD DATA STRUCTURES */
+ /* FIXME POKING INSIDE BFD DATA STRUCTURES. */
#define STRING_TABLE_OFFSET (sym_bfd->origin + obj_str_filepos (sym_bfd))
#define SYMBOL_TABLE_OFFSET (sym_bfd->origin + obj_sym_filepos (sym_bfd))
- /* FIXME POKING INSIDE BFD DATA STRUCTURES */
-
- DBX_SYMFILE_INFO (objfile)->stab_section_info = NULL;
+ /* FIXME POKING INSIDE BFD DATA STRUCTURES. */
text_sect = bfd_get_section_by_name (sym_bfd, ".text");
if (!text_sect)
however at least check to see if the size is less than the size of
the size field itself, or larger than the size of the entire file.
Note that all valid string tables have a size greater than zero, since
- the bytes used to hold the size are included in the count. */
+ the bytes used to hold the size are included in the count. */
if (STRING_TABLE_OFFSET == 0)
{
/* It appears that with the existing bfd code, STRING_TABLE_OFFSET
will never be zero, even when there is no string table. This
- would appear to be a bug in bfd. */
+ would appear to be a bug in bfd. */
DBX_STRINGTAB_SIZE (objfile) = 0;
DBX_STRINGTAB (objfile) = NULL;
}
{
/* With the existing bfd code, STRING_TABLE_OFFSET will be set to
EOF if there is no string table, and attempting to read the size
- from EOF will read zero bytes. */
+ from EOF will read zero bytes. */
DBX_STRINGTAB_SIZE (objfile) = 0;
DBX_STRINGTAB (objfile) = NULL;
}
the minimum is DBX_STRINGTAB_SIZE_SIZE. If we just read some
random data that happened to be at STRING_TABLE_OFFSET, because
bfd can't tell us there is no string table, the sanity checks may
- or may not catch this. */
+ or may not catch this. */
DBX_STRINGTAB_SIZE (objfile) = bfd_h_get_32 (sym_bfd, size_temp);
if (DBX_STRINGTAB_SIZE (objfile) < sizeof (size_temp)
/* Perform any local cleanups required when we are done with a particular
objfile. I.E, we are in the process of discarding all symbol information
for an objfile, freeing up all memory held for it, and unlinking the
- objfile struct from the global list of known objfiles. */
+ objfile struct from the global list of known objfiles. */
static void
dbx_symfile_finish (struct objfile *objfile)
{
- if (objfile->deprecated_sym_stab_info != NULL)
+ free_header_files ();
+}
+
+static void
+dbx_free_symfile_info (struct objfile *objfile, void *arg)
+{
+ struct dbx_symfile_info *dbx = arg;
+
+ if (dbx->header_files != NULL)
{
- if (HEADER_FILES (objfile) != NULL)
- {
- int i = N_HEADER_FILES (objfile);
- struct header_file *hfiles = HEADER_FILES (objfile);
+ int i = dbx->n_header_files;
+ struct header_file *hfiles = dbx->header_files;
- while (--i >= 0)
- {
- xfree (hfiles[i].name);
- xfree (hfiles[i].vector);
- }
- xfree (hfiles);
+ while (--i >= 0)
+ {
+ xfree (hfiles[i].name);
+ xfree (hfiles[i].vector);
}
- xfree (objfile->deprecated_sym_stab_info);
+ xfree (hfiles);
}
- free_header_files ();
+
+ xfree (dbx);
}
+
\f
/* Buffer for reading the symbol table entries. */
if (symbuf_left <= 0)
{
file_ptr filepos = symbuf_sections->section->filepos;
+
if (bfd_seek (sym_bfd, filepos, SEEK_SET) != 0)
perror_with_name (bfd_get_filename (sym_bfd));
symbuf_left = bfd_section_size (sym_bfd, symbuf_sections->section);
#define INTERNALIZE_SYMBOL(intern, extern, abfd) \
{ \
- (intern).n_type = bfd_h_get_8 (abfd, (extern)->e_type); \
(intern).n_strx = bfd_h_get_32 (abfd, (extern)->e_strx); \
+ (intern).n_type = bfd_h_get_8 (abfd, (extern)->e_type); \
+ (intern).n_other = 0; \
(intern).n_desc = bfd_h_get_16 (abfd, (extern)->e_desc); \
if (bfd_get_sign_extend_vma (abfd)) \
(intern).n_value = bfd_h_get_signed_32 (abfd, (extern)->e_value); \
init_bincl_list (int number, struct objfile *objfile)
{
bincls_allocated = number;
- next_bincl = bincl_list = (struct header_file_location *)
- xmalloc (bincls_allocated * sizeof (struct header_file_location));
+ next_bincl = bincl_list = XNEWVEC (struct header_file_location,
+ bincls_allocated);
}
/* Add a bincl to the list. */
if (next_bincl >= bincl_list + bincls_allocated)
{
int offset = next_bincl - bincl_list;
+
bincls_allocated *= 2;
bincl_list = (struct header_file_location *)
xrealloc ((char *) bincl_list,
rather than abort the symbol reading or flood the user with messages. */
static char *
-set_namestring (struct objfile *objfile, struct internal_nlist nlist)
+set_namestring (struct objfile *objfile, const struct internal_nlist *nlist)
{
char *namestring;
- if (((unsigned) nlist.n_strx + file_string_table_offset) >=
- DBX_STRINGTAB_SIZE (objfile))
+ if (nlist->n_strx + file_string_table_offset
+ >= DBX_STRINGTAB_SIZE (objfile)
+ || nlist->n_strx + file_string_table_offset < nlist->n_strx)
{
- complaint (&symfile_complaints, _("bad string table offset in symbol %d"),
+ complaint (&symfile_complaints,
+ _("bad string table offset in symbol %d"),
symnum);
namestring = "<bad string table offset>";
}
else
- namestring = nlist.n_strx + file_string_table_offset +
- DBX_STRINGTAB (objfile);
+ namestring = (nlist->n_strx + file_string_table_offset
+ + DBX_STRINGTAB (objfile));
return namestring;
}
long dynrel_count;
arelent **dynrels;
CORE_ADDR sym_value;
- char *name;
+ const char *name;
/* Check that the symbol file has dynamic symbols that we know about.
bfd_arch_unknown can happen if we are reading a sun3 symbol file
if (bfd_get_section_flags (abfd, sec) & SEC_CODE)
{
- sym_value += ANOFFSET (objfile->section_offsets,
- SECT_OFF_TEXT (objfile));
type = N_TEXT;
}
else if (bfd_get_section_flags (abfd, sec) & SEC_DATA)
{
- sym_value += ANOFFSET (objfile->section_offsets,
- SECT_OFF_DATA (objfile));
type = N_DATA;
}
else if (bfd_get_section_flags (abfd, sec) & SEC_ALLOC)
{
- sym_value += ANOFFSET (objfile->section_offsets,
- SECT_OFF_BSS (objfile));
type = N_BSS;
}
else
if (sym->flags & BSF_GLOBAL)
type |= N_EXT;
- record_minimal_symbol ((char *) bfd_asymbol_name (sym), sym_value,
+ record_minimal_symbol (bfd_asymbol_name (sym), sym_value,
type, objfile);
}
}
counter++, relptr++)
{
arelent *rel = *relptr;
- CORE_ADDR address =
- rel->address + ANOFFSET (objfile->section_offsets,
- SECT_OFF_DATA (objfile));
+ CORE_ADDR address = rel->address;
switch (bfd_get_arch (abfd))
{
continue;
}
- name = (char *) bfd_asymbol_name (*rel->sym_ptr_ptr);
+ name = bfd_asymbol_name (*rel->sym_ptr_ptr);
prim_record_minimal_symbol (name, address, mst_solib_trampoline,
objfile);
}
}
static CORE_ADDR
-find_stab_function_addr (char *namestring, char *filename,
+find_stab_function_addr (char *namestring, const char *filename,
struct objfile *objfile)
{
- struct minimal_symbol *msym;
+ struct bound_minimal_symbol msym;
char *p;
int n;
p[n] = 0;
msym = lookup_minimal_symbol (p, filename, objfile);
- if (msym == NULL)
+ if (msym.minsym == NULL)
{
/* Sun Fortran appends an underscore to the minimal symbol name,
try again with an appended underscore if the minimal symbol
msym = lookup_minimal_symbol (p, filename, objfile);
}
- if (msym == NULL && filename != NULL)
+ if (msym.minsym == NULL && filename != NULL)
{
- /* Try again without the filename. */
+ /* Try again without the filename. */
p[n] = 0;
msym = lookup_minimal_symbol (p, NULL, objfile);
}
- if (msym == NULL && filename != NULL)
+ if (msym.minsym == NULL && filename != NULL)
{
- /* And try again for Sun Fortran, but without the filename. */
+ /* And try again for Sun Fortran, but without the filename. */
p[n] = '_';
p[n + 1] = 0;
msym = lookup_minimal_symbol (p, NULL, objfile);
}
- return msym == NULL ? 0 : SYMBOL_VALUE_ADDRESS (msym);
+ return msym.minsym == NULL ? 0 : BMSYMBOL_VALUE_ADDRESS (msym);
}
static void
function_outside_compilation_unit_complaint (const char *arg1)
{
complaint (&symfile_complaints,
- _("function `%s' appears to be defined outside of all compilation \
-units"),
+ _("function `%s' appears to be defined "
+ "outside of all compilation units"),
arg1);
}
/* Setup partial_symtab's describing each source file for which
- debugging information is available. */
+ debugging information is available. */
static void
read_dbx_symtab (struct objfile *objfile)
{
- struct external_nlist *bufp = 0; /* =0 avoids gcc -Wall glitch */
+ struct gdbarch *gdbarch = get_objfile_arch (objfile);
+ struct external_nlist *bufp = 0; /* =0 avoids gcc -Wall glitch. */
struct internal_nlist nlist;
CORE_ADDR text_addr;
int text_size;
+ char *sym_name;
+ int sym_len;
char *namestring;
int nsl;
int past_first_source_file = 0;
- CORE_ADDR last_o_file_start = 0;
CORE_ADDR last_function_start = 0;
struct cleanup *back_to;
bfd *abfd;
int textlow_not_set;
int data_sect_index;
- /* Current partial symtab */
+ /* Current partial symtab. */
struct partial_symtab *pst;
- /* List of current psymtab's include files */
- char **psymtab_include_list;
+ /* List of current psymtab's include files. */
+ const char **psymtab_include_list;
int includes_allocated;
int includes_used;
- /* Index within current psymtab dependency list */
+ /* Index within current psymtab dependency list. */
struct partial_symtab **dependency_list;
int dependencies_used, dependencies_allocated;
includes_allocated = 30;
includes_used = 0;
- psymtab_include_list = (char **) alloca (includes_allocated *
- sizeof (char *));
+ psymtab_include_list = (const char **) alloca (includes_allocated *
+ sizeof (const char *));
dependencies_allocated = 30;
dependencies_used = 0;
init_bincl_list (20, objfile);
back_to = make_cleanup_free_bincl_list (objfile);
- last_source_file = NULL;
+ set_last_source_file (NULL);
lowest_text_address = (CORE_ADDR) -1;
- symfile_bfd = objfile->obfd; /* For next_text_symbol */
+ symfile_bfd = objfile->obfd; /* For next_text_symbol. */
abfd = objfile->obfd;
symbuf_end = symbuf_idx = 0;
next_symbol_text_func = dbx_next_symbol_text;
for (symnum = 0; symnum < DBX_SYMCOUNT (objfile); symnum++)
{
- /* Get the symbol for this run and pull out some info */
- QUIT; /* allow this to be interruptable */
+ /* Get the symbol for this run and pull out some info. */
+ QUIT; /* Allow this to be interruptable. */
if (symbuf_idx == symbuf_end)
fill_symbuf (abfd);
bufp = &symbuf[symbuf_idx++];
*) The assignment to namestring.
*) The call to strchr.
- *) The addition of a partial symbol the the two partial
+ *) The addition of a partial symbol the two partial
symbol lists. This last is a large section of code, so
- I've imbedded it in the following macro.
- */
+ I've imbedded it in the following macro. */
switch (nlist.n_type)
{
- char *p;
/*
* Standard, external, non-debugger, symbols
*/
- case N_TEXT | N_EXT:
- case N_NBTEXT | N_EXT:
- nlist.n_value += ANOFFSET (objfile->section_offsets,
- SECT_OFF_TEXT (objfile));
+ case N_TEXT | N_EXT:
+ case N_NBTEXT | N_EXT:
goto record_it;
- case N_DATA | N_EXT:
- case N_NBDATA | N_EXT:
- nlist.n_value += ANOFFSET (objfile->section_offsets,
- SECT_OFF_DATA (objfile));
+ case N_DATA | N_EXT:
+ case N_NBDATA | N_EXT:
goto record_it;
- case N_BSS:
- case N_BSS | N_EXT:
- case N_NBBSS | N_EXT:
- case N_SETV | N_EXT: /* FIXME, is this in BSS? */
- nlist.n_value += ANOFFSET (objfile->section_offsets,
- SECT_OFF_BSS (objfile));
+ case N_BSS:
+ case N_BSS | N_EXT:
+ case N_NBBSS | N_EXT:
+ case N_SETV | N_EXT: /* FIXME, is this in BSS? */
goto record_it;
- case N_ABS | N_EXT:
+ case N_ABS | N_EXT:
record_it:
- namestring = set_namestring (objfile, nlist);
+ namestring = set_namestring (objfile, &nlist);
- bss_ext_symbol:
record_minimal_symbol (namestring, nlist.n_value,
nlist.n_type, objfile); /* Always */
continue;
- /* Standard, local, non-debugger, symbols */
+ /* Standard, local, non-debugger, symbols. */
- case N_NBTEXT:
+ case N_NBTEXT:
/* We need to be able to deal with both N_FN or N_TEXT,
because we have no way of knowing whether the sys-supplied ld
or GNU ld was used to make the executable. Sequents throw
in another wrinkle -- they renumbered N_FN. */
- case N_FN:
- case N_FN_SEQ:
- case N_TEXT:
- nlist.n_value += ANOFFSET (objfile->section_offsets,
- SECT_OFF_TEXT (objfile));
- namestring = set_namestring (objfile, nlist);
+ case N_FN:
+ case N_FN_SEQ:
+ case N_TEXT:
+ namestring = set_namestring (objfile, &nlist);
if ((namestring[0] == '-' && namestring[1] == 'l')
|| (namestring[(nsl = strlen (namestring)) - 1] == 'o'
&& namestring[nsl - 2] == '.'))
- {
- if (past_first_source_file && pst
- /* The gould NP1 uses low values for .o and -l symbols
- which are not the address. */
- && nlist.n_value >= pst->textlow)
- {
- end_psymtab (pst, psymtab_include_list, includes_used,
- symnum * symbol_size,
- nlist.n_value > pst->texthigh
- ? nlist.n_value : pst->texthigh,
- dependency_list, dependencies_used,
- textlow_not_set);
- pst = (struct partial_symtab *) 0;
- includes_used = 0;
- dependencies_used = 0;
- }
- else
- past_first_source_file = 1;
- last_o_file_start = nlist.n_value;
- }
+ {
+ nlist.n_value += ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT (objfile));
+
+ if (past_first_source_file && pst
+ /* The gould NP1 uses low values for .o and -l symbols
+ which are not the address. */
+ && nlist.n_value >= pst->textlow)
+ {
+ dbx_end_psymtab (objfile, pst, psymtab_include_list,
+ includes_used, symnum * symbol_size,
+ nlist.n_value > pst->texthigh
+ ? nlist.n_value : pst->texthigh,
+ dependency_list, dependencies_used,
+ textlow_not_set);
+ pst = (struct partial_symtab *) 0;
+ includes_used = 0;
+ dependencies_used = 0;
+ has_line_numbers = 0;
+ }
+ else
+ past_first_source_file = 1;
+ }
else
- goto record_it;
+ goto record_it;
continue;
- case N_DATA:
- nlist.n_value += ANOFFSET (objfile->section_offsets,
- SECT_OFF_DATA (objfile));
+ case N_DATA:
goto record_it;
- case N_UNDF | N_EXT:
- if (nlist.n_value != 0)
- {
- /* This is a "Fortran COMMON" symbol. See if the target
- environment knows where it has been relocated to. */
-
- CORE_ADDR reladdr;
+ case N_UNDF | N_EXT:
+ /* The case (nlist.n_value != 0) is a "Fortran COMMON" symbol.
+ We used to rely on the target to tell us whether it knows
+ where the symbol has been relocated to, but none of the
+ target implementations actually provided that operation.
+ So we just ignore the symbol, the same way we would do if
+ we had a target-side symbol lookup which returned no match.
- namestring = set_namestring (objfile, nlist);
- if (target_lookup_symbol (namestring, &reladdr))
- {
- continue; /* Error in lookup; ignore symbol for now. */
- }
- nlist.n_type ^= (N_BSS ^ N_UNDF); /* Define it as a bss-symbol */
- nlist.n_value = reladdr;
- goto bss_ext_symbol;
- }
- continue; /* Just undefined, not COMMON */
+ All other symbols (with nlist.n_value == 0), are really
+ undefined, and so we ignore them too. */
+ continue;
- case N_UNDF:
+ case N_UNDF:
if (processing_acc_compilation && nlist.n_strx == 1)
- {
- /* Deal with relative offsets in the string table
- used in ELF+STAB under Solaris. If we want to use the
- n_strx field, which contains the name of the file,
- we must adjust file_string_table_offset *before* calling
- set_namestring(). */
- past_first_source_file = 1;
- file_string_table_offset = next_file_string_table_offset;
- next_file_string_table_offset =
- file_string_table_offset + nlist.n_value;
- if (next_file_string_table_offset < file_string_table_offset)
- error (_("string table offset backs up at %d"), symnum);
- /* FIXME -- replace error() with complaint. */
- continue;
- }
+ {
+ /* Deal with relative offsets in the string table
+ used in ELF+STAB under Solaris. If we want to use the
+ n_strx field, which contains the name of the file,
+ we must adjust file_string_table_offset *before* calling
+ set_namestring(). */
+ past_first_source_file = 1;
+ file_string_table_offset = next_file_string_table_offset;
+ next_file_string_table_offset =
+ file_string_table_offset + nlist.n_value;
+ if (next_file_string_table_offset < file_string_table_offset)
+ error (_("string table offset backs up at %d"), symnum);
+ /* FIXME -- replace error() with complaint. */
+ continue;
+ }
continue;
/* Lots of symbol types we can just ignore. */
- case N_ABS:
- case N_NBDATA:
- case N_NBBSS:
+ case N_ABS:
+ case N_NBDATA:
+ case N_NBBSS:
continue;
- /* Keep going . . . */
+ /* Keep going . . . */
/*
* Special symbol types for GNU
*/
- case N_INDR:
- case N_INDR | N_EXT:
- case N_SETA:
- case N_SETA | N_EXT:
- case N_SETT:
- case N_SETT | N_EXT:
- case N_SETD:
- case N_SETD | N_EXT:
- case N_SETB:
- case N_SETB | N_EXT:
- case N_SETV:
+ case N_INDR:
+ case N_INDR | N_EXT:
+ case N_SETA:
+ case N_SETA | N_EXT:
+ case N_SETT:
+ case N_SETT | N_EXT:
+ case N_SETD:
+ case N_SETD | N_EXT:
+ case N_SETB:
+ case N_SETB | N_EXT:
+ case N_SETV:
continue;
/*
* Debugger symbols
*/
- case N_SO:
+ case N_SO:
{
CORE_ADDR valu;
static int prev_so_symnum = -10;
static int first_so_symnum;
- char *p;
+ const char *p;
static char *dirname_nso;
int prev_textlow_not_set;
prev_textlow_not_set = textlow_not_set;
/* A zero value is probably an indication for the SunPRO 3.0
- compiler. end_psymtab explicitly tests for zero, so
+ compiler. dbx_end_psymtab explicitly tests for zero, so
don't relocate it. */
if (nlist.n_value == 0
- && gdbarch_sofun_address_maybe_missing (current_gdbarch))
+ && gdbarch_sofun_address_maybe_missing (gdbarch))
{
textlow_not_set = 1;
valu = 0;
past_first_source_file = 1;
if (prev_so_symnum != symnum - 1)
- { /* Here if prev stab wasn't N_SO */
+ { /* Here if prev stab wasn't N_SO. */
first_so_symnum = symnum;
if (pst)
{
- end_psymtab (pst, psymtab_include_list, includes_used,
- symnum * symbol_size,
- valu > pst->texthigh ? valu : pst->texthigh,
- dependency_list, dependencies_used,
- prev_textlow_not_set);
+ dbx_end_psymtab (objfile, pst, psymtab_include_list,
+ includes_used, symnum * symbol_size,
+ valu > pst->texthigh
+ ? valu : pst->texthigh,
+ dependency_list, dependencies_used,
+ prev_textlow_not_set);
pst = (struct partial_symtab *) 0;
includes_used = 0;
dependencies_used = 0;
+ has_line_numbers = 0;
}
}
prev_so_symnum = symnum;
- /* End the current partial symtab and start a new one */
+ /* End the current partial symtab and start a new one. */
- namestring = set_namestring (objfile, nlist);
+ namestring = set_namestring (objfile, &nlist);
- /* Null name means end of .o file. Don't start a new one. */
+ /* Null name means end of .o file. Don't start a new one. */
if (*namestring == '\000')
continue;
/* Some compilers (including gcc) emit a pair of initial N_SOs.
The first one is a directory name; the second the file name.
If pst exists, is empty, and has a filename ending in '/',
- we assume the previous N_SO was a directory name. */
+ we assume the previous N_SO was a directory name. */
- p = strrchr (namestring, '/');
- if (p && *(p + 1) == '\000')
+ p = lbasename (namestring);
+ if (p != namestring && *p == '\000')
{
/* Save the directory name SOs locally, then save it into
- the psymtab when it's created below. */
+ the psymtab when it's created below. */
dirname_nso = namestring;
continue;
}
/* Some other compilers (C++ ones in particular) emit useless
- SOs for non-existant .c files. We ignore all subsequent SOs that
- immediately follow the first. */
+ SOs for non-existant .c files. We ignore all subsequent SOs
+ that immediately follow the first. */
if (!pst)
{
- pst = start_psymtab (objfile,
- namestring, valu,
- first_so_symnum * symbol_size,
- objfile->global_psymbols.next,
- objfile->static_psymbols.next);
+ pst = start_psymtab (objfile,
+ namestring, valu,
+ first_so_symnum * symbol_size,
+ objfile->global_psymbols.next,
+ objfile->static_psymbols.next);
pst->dirname = dirname_nso;
dirname_nso = NULL;
}
continue;
}
- case N_BINCL:
+ case N_BINCL:
{
enum language tmp_language;
+
/* Add this bincl to the bincl_list for future EXCLs. No
need to save the string; it'll be around until
- read_dbx_symtab function returns */
+ read_dbx_symtab function returns. */
- namestring = set_namestring (objfile, nlist);
+ namestring = set_namestring (objfile, &nlist);
tmp_language = deduce_language_from_filename (namestring);
/* Only change the psymtab's language if we've learned
psymtab_language = tmp_language;
if (pst == NULL)
- {
- /* FIXME: we should not get here without a PST to work on.
- Attempt to recover. */
- complaint (&symfile_complaints,
- _("N_BINCL %s not in entries for any file, at symtab \
-pos %d"),
- namestring, symnum);
- continue;
- }
+ {
+ /* FIXME: we should not get here without a PST to work on.
+ Attempt to recover. */
+ complaint (&symfile_complaints,
+ _("N_BINCL %s not in entries for "
+ "any file, at symtab pos %d"),
+ namestring, symnum);
+ continue;
+ }
add_bincl_to_list (pst, namestring, nlist.n_value);
- /* Mark down an include file in the current psymtab */
+ /* Mark down an include file in the current psymtab. */
goto record_include_file;
}
- case N_SOL:
+ case N_SOL:
{
enum language tmp_language;
- /* Mark down an include file in the current psymtab */
- namestring = set_namestring (objfile, nlist);
+ /* Mark down an include file in the current psymtab. */
+ namestring = set_namestring (objfile, &nlist);
tmp_language = deduce_language_from_filename (namestring);
/* Only change the psymtab's language if we've learned
/* In C++, one may expect the same filename to come round many
times, when code is coming alternately from the main file
- and from inline functions in other files. So I check to see
+ and from inline functions in other files. So I check to see
if this is a file we've seen before -- either the main
source file, or a previously included file.
things like "break c-exp.y:435" need to work (I
suppose the psymtab_include_list could be hashed or put
in a binary tree, if profiling shows this is a major hog). */
- if (pst && strcmp (namestring, pst->filename) == 0)
- continue;
+ if (pst && filename_cmp (namestring, pst->filename) == 0)
+ continue;
{
int i;
+
for (i = 0; i < includes_used; i++)
- if (strcmp (namestring, psymtab_include_list[i]) == 0)
+ if (filename_cmp (namestring, psymtab_include_list[i]) == 0)
{
i = -1;
break;
continue;
}
- record_include_file:
+ record_include_file:
psymtab_include_list[includes_used++] = namestring;
if (includes_used >= includes_allocated)
- {
- char **orig = psymtab_include_list;
+ {
+ const char **orig = psymtab_include_list;
- psymtab_include_list = (char **)
- alloca ((includes_allocated *= 2) *
- sizeof (char *));
- memcpy (psymtab_include_list, orig,
- includes_used * sizeof (char *));
- }
+ psymtab_include_list = (const char **)
+ alloca ((includes_allocated *= 2) * sizeof (const char *));
+ memcpy (psymtab_include_list, orig,
+ includes_used * sizeof (const char *));
+ }
continue;
}
- case N_LSYM: /* Typedef or automatic variable. */
- case N_STSYM: /* Data seg var -- static */
- case N_LCSYM: /* BSS " */
- case N_ROSYM: /* Read-only data seg var -- static. */
- case N_NBSTS: /* Gould nobase. */
- case N_NBLCS: /* symbols. */
- case N_FUN:
- case N_GSYM: /* Global (extern) variable; can be
+ case N_LSYM: /* Typedef or automatic variable. */
+ case N_STSYM: /* Data seg var -- static. */
+ case N_LCSYM: /* BSS " */
+ case N_ROSYM: /* Read-only data seg var -- static. */
+ case N_NBSTS: /* Gould nobase. */
+ case N_NBLCS: /* symbols. */
+ case N_FUN:
+ case N_GSYM: /* Global (extern) variable; can be
data or bss (sigh FIXME). */
/* Following may probably be ignored; I'll leave them here
for now (until I do Pascal and Modula 2 extensions). */
- case N_PC: /* I may or may not need this; I
+ case N_PC: /* I may or may not need this; I
suspect not. */
- case N_M2C: /* I suspect that I can ignore this here. */
- case N_SCOPE: /* Same. */
+ case N_M2C: /* I suspect that I can ignore this here. */
+ case N_SCOPE: /* Same. */
+ {
+ char *p;
- namestring = set_namestring (objfile, nlist);
+ namestring = set_namestring (objfile, &nlist);
/* See if this is an end of function stab. */
if (pst && nlist.n_type == N_FUN && *namestring == '\000')
- {
- CORE_ADDR valu;
-
- /* It's value is the size (in bytes) of the function for
- function relative stabs, or the address of the function's
- end for old style stabs. */
- valu = nlist.n_value + last_function_start;
- if (pst->texthigh == 0 || valu > pst->texthigh)
- pst->texthigh = valu;
- break;
- }
+ {
+ CORE_ADDR valu;
+
+ /* It's value is the size (in bytes) of the function for
+ function relative stabs, or the address of the function's
+ end for old style stabs. */
+ valu = nlist.n_value + last_function_start;
+ if (pst->texthigh == 0 || valu > pst->texthigh)
+ pst->texthigh = valu;
+ break;
+ }
p = (char *) strchr (namestring, ':');
if (!p)
- continue; /* Not a debugging symbol. */
+ continue; /* Not a debugging symbol. */
+ sym_len = 0;
+ sym_name = NULL; /* pacify "gcc -Werror" */
+ if (psymtab_language == language_cplus)
+ {
+ char *new_name, *name = xmalloc (p - namestring + 1);
+ memcpy (name, namestring, p - namestring);
+
+ name[p - namestring] = '\0';
+ new_name = cp_canonicalize_string (name);
+ if (new_name != NULL)
+ {
+ sym_len = strlen (new_name);
+ sym_name = obstack_copy0 (&objfile->objfile_obstack,
+ new_name, sym_len);
+ xfree (new_name);
+ }
+ xfree (name);
+ }
+ if (sym_len == 0)
+ {
+ sym_name = namestring;
+ sym_len = p - namestring;
+ }
/* Main processing section for debugging symbols which
the initial read through the symbol tables needs to worry
which indicates the debugging type symbol. */
switch (p[1])
- {
- case 'S':
- nlist.n_value += ANOFFSET (objfile->section_offsets,
- data_sect_index);
-
- if (gdbarch_static_transform_name_p (current_gdbarch))
- namestring = gdbarch_static_transform_name
- (current_gdbarch, namestring);
-
- add_psymbol_to_list (namestring, p - namestring,
- VAR_DOMAIN, LOC_STATIC,
- &objfile->static_psymbols,
- 0, nlist.n_value,
- psymtab_language, objfile);
- continue;
- case 'G':
- nlist.n_value += ANOFFSET (objfile->section_offsets,
- data_sect_index);
- /* The addresses in these entries are reported to be
- wrong. See the code that reads 'G's for symtabs. */
- add_psymbol_to_list (namestring, p - namestring,
- VAR_DOMAIN, LOC_STATIC,
- &objfile->global_psymbols,
- 0, nlist.n_value,
- psymtab_language, objfile);
- continue;
+ {
+ case 'S':
+ nlist.n_value += ANOFFSET (objfile->section_offsets,
+ data_sect_index);
- case 'T':
- /* When a 'T' entry is defining an anonymous enum, it
- may have a name which is the empty string, or a
- single space. Since they're not really defining a
- symbol, those shouldn't go in the partial symbol
- table. We do pick up the elements of such enums at
- 'check_enum:', below. */
- if (p >= namestring + 2
- || (p == namestring + 1
- && namestring[0] != ' '))
- {
- add_psymbol_to_list (namestring, p - namestring,
- STRUCT_DOMAIN, LOC_TYPEDEF,
- &objfile->static_psymbols,
- nlist.n_value, 0,
- psymtab_language, objfile);
- if (p[2] == 't')
- {
- /* Also a typedef with the same name. */
- add_psymbol_to_list (namestring, p - namestring,
- VAR_DOMAIN, LOC_TYPEDEF,
- &objfile->static_psymbols,
- nlist.n_value, 0,
- psymtab_language, objfile);
- p += 1;
- }
- }
- goto check_enum;
- case 't':
- if (p != namestring) /* a name is there, not just :T... */
- {
- add_psymbol_to_list (namestring, p - namestring,
- VAR_DOMAIN, LOC_TYPEDEF,
- &objfile->static_psymbols,
- nlist.n_value, 0,
- psymtab_language, objfile);
- }
- check_enum:
- /* If this is an enumerated type, we need to
- add all the enum constants to the partial symbol
- table. This does not cover enums without names, e.g.
- "enum {a, b} c;" in C, but fortunately those are
- rare. There is no way for GDB to find those from the
- enum type without spending too much time on it. Thus
- to solve this problem, the compiler needs to put out the
- enum in a nameless type. GCC2 does this. */
-
- /* We are looking for something of the form
- <name> ":" ("t" | "T") [<number> "="] "e"
- {<constant> ":" <value> ","} ";". */
-
- /* Skip over the colon and the 't' or 'T'. */
- p += 2;
- /* This type may be given a number. Also, numbers can come
- in pairs like (0,26). Skip over it. */
- while ((*p >= '0' && *p <= '9')
- || *p == '(' || *p == ',' || *p == ')'
- || *p == '=')
- p++;
-
- if (*p++ == 'e')
- {
- /* The aix4 compiler emits extra crud before the members. */
- if (*p == '-')
- {
- /* Skip over the type (?). */
- while (*p != ':')
- p++;
+ if (gdbarch_static_transform_name_p (gdbarch))
+ gdbarch_static_transform_name (gdbarch, namestring);
- /* Skip over the colon. */
- p++;
- }
+ add_psymbol_to_list (sym_name, sym_len, 1,
+ VAR_DOMAIN, LOC_STATIC,
+ &objfile->static_psymbols,
+ nlist.n_value, psymtab_language, objfile);
+ continue;
- /* We have found an enumerated type. */
- /* According to comments in read_enum_type
- a comma could end it instead of a semicolon.
- I don't know where that happens.
- Accept either. */
- while (*p && *p != ';' && *p != ',')
- {
- char *q;
-
- /* Check for and handle cretinous dbx symbol name
- continuation! */
- if (*p == '\\' || (*p == '?' && p[1] == '\0'))
- p = next_symbol_text (objfile);
-
- /* Point to the character after the name
- of the enum constant. */
- for (q = p; *q && *q != ':'; q++)
- ;
- /* Note that the value doesn't matter for
- enum constants in psymtabs, just in symtabs. */
- add_psymbol_to_list (p, q - p,
- VAR_DOMAIN, LOC_CONST,
- &objfile->static_psymbols, 0,
- 0, psymtab_language, objfile);
- /* Point past the name. */
- p = q;
- /* Skip over the value. */
- while (*p && *p != ',')
- p++;
- /* Advance past the comma. */
- if (*p)
+ case 'G':
+ nlist.n_value += ANOFFSET (objfile->section_offsets,
+ data_sect_index);
+ /* The addresses in these entries are reported to be
+ wrong. See the code that reads 'G's for symtabs. */
+ add_psymbol_to_list (sym_name, sym_len, 1,
+ VAR_DOMAIN, LOC_STATIC,
+ &objfile->global_psymbols,
+ nlist.n_value, psymtab_language, objfile);
+ continue;
+
+ case 'T':
+ /* When a 'T' entry is defining an anonymous enum, it
+ may have a name which is the empty string, or a
+ single space. Since they're not really defining a
+ symbol, those shouldn't go in the partial symbol
+ table. We do pick up the elements of such enums at
+ 'check_enum:', below. */
+ if (p >= namestring + 2
+ || (p == namestring + 1
+ && namestring[0] != ' '))
+ {
+ add_psymbol_to_list (sym_name, sym_len, 1,
+ STRUCT_DOMAIN, LOC_TYPEDEF,
+ &objfile->static_psymbols,
+ 0, psymtab_language, objfile);
+ if (p[2] == 't')
+ {
+ /* Also a typedef with the same name. */
+ add_psymbol_to_list (sym_name, sym_len, 1,
+ VAR_DOMAIN, LOC_TYPEDEF,
+ &objfile->static_psymbols,
+ 0, psymtab_language, objfile);
+ p += 1;
+ }
+ }
+ goto check_enum;
+
+ case 't':
+ if (p != namestring) /* a name is there, not just :T... */
+ {
+ add_psymbol_to_list (sym_name, sym_len, 1,
+ VAR_DOMAIN, LOC_TYPEDEF,
+ &objfile->static_psymbols,
+ 0, psymtab_language, objfile);
+ }
+ check_enum:
+ /* If this is an enumerated type, we need to
+ add all the enum constants to the partial symbol
+ table. This does not cover enums without names, e.g.
+ "enum {a, b} c;" in C, but fortunately those are
+ rare. There is no way for GDB to find those from the
+ enum type without spending too much time on it. Thus
+ to solve this problem, the compiler needs to put out the
+ enum in a nameless type. GCC2 does this. */
+
+ /* We are looking for something of the form
+ <name> ":" ("t" | "T") [<number> "="] "e"
+ {<constant> ":" <value> ","} ";". */
+
+ /* Skip over the colon and the 't' or 'T'. */
+ p += 2;
+ /* This type may be given a number. Also, numbers can come
+ in pairs like (0,26). Skip over it. */
+ while ((*p >= '0' && *p <= '9')
+ || *p == '(' || *p == ',' || *p == ')'
+ || *p == '=')
+ p++;
+
+ if (*p++ == 'e')
+ {
+ /* The aix4 compiler emits extra crud before the members. */
+ if (*p == '-')
+ {
+ /* Skip over the type (?). */
+ while (*p != ':')
+ p++;
+
+ /* Skip over the colon. */
p++;
- }
- }
- continue;
- case 'c':
- /* Constant, e.g. from "const" in Pascal. */
- add_psymbol_to_list (namestring, p - namestring,
- VAR_DOMAIN, LOC_CONST,
- &objfile->static_psymbols, nlist.n_value,
- 0, psymtab_language, objfile);
- continue;
+ }
- case 'f':
- if (! pst)
- {
- int name_len = p - namestring;
- char *name = xmalloc (name_len + 1);
- memcpy (name, namestring, name_len);
- name[name_len] = '\0';
- function_outside_compilation_unit_complaint (name);
- xfree (name);
- }
- nlist.n_value += ANOFFSET (objfile->section_offsets,
- SECT_OFF_TEXT (objfile));
- /* Kludges for ELF/STABS with Sun ACC */
- last_function_name = namestring;
- /* Do not fix textlow==0 for .o or NLM files, as 0 is a legit
- value for the bottom of the text seg in those cases. */
- if (nlist.n_value == ANOFFSET (objfile->section_offsets,
- SECT_OFF_TEXT (objfile))
- && gdbarch_sofun_address_maybe_missing (current_gdbarch))
- {
- CORE_ADDR minsym_valu =
- find_stab_function_addr (namestring,
- pst ? pst->filename : NULL,
- objfile);
- /* find_stab_function_addr will return 0 if the minimal
- symbol wasn't found. (Unfortunately, this might also
- be a valid address.) Anyway, if it *does* return 0,
- it is likely that the value was set correctly to begin
- with... */
- if (minsym_valu != 0)
- nlist.n_value = minsym_valu;
- }
- if (pst && textlow_not_set
- && gdbarch_sofun_address_maybe_missing (current_gdbarch))
- {
- pst->textlow = nlist.n_value;
- textlow_not_set = 0;
- }
- /* End kludge. */
-
- /* Keep track of the start of the last function so we
- can handle end of function symbols. */
- last_function_start = nlist.n_value;
-
- /* In reordered executables this function may lie outside
- the bounds created by N_SO symbols. If that's the case
- use the address of this function as the low bound for
- the partial symbol table. */
- if (pst
- && (textlow_not_set
- || (nlist.n_value < pst->textlow
- && (nlist.n_value
- != ANOFFSET (objfile->section_offsets,
- SECT_OFF_TEXT (objfile))))))
- {
- pst->textlow = nlist.n_value;
- textlow_not_set = 0;
- }
- add_psymbol_to_list (namestring, p - namestring,
- VAR_DOMAIN, LOC_BLOCK,
- &objfile->static_psymbols,
- 0, nlist.n_value,
- psymtab_language, objfile);
- continue;
+ /* We have found an enumerated type. */
+ /* According to comments in read_enum_type
+ a comma could end it instead of a semicolon.
+ I don't know where that happens.
+ Accept either. */
+ while (*p && *p != ';' && *p != ',')
+ {
+ char *q;
+
+ /* Check for and handle cretinous dbx symbol name
+ continuation! */
+ if (*p == '\\' || (*p == '?' && p[1] == '\0'))
+ p = next_symbol_text (objfile);
+
+ /* Point to the character after the name
+ of the enum constant. */
+ for (q = p; *q && *q != ':'; q++)
+ ;
+ /* Note that the value doesn't matter for
+ enum constants in psymtabs, just in symtabs. */
+ add_psymbol_to_list (p, q - p, 1,
+ VAR_DOMAIN, LOC_CONST,
+ &objfile->static_psymbols, 0,
+ psymtab_language, objfile);
+ /* Point past the name. */
+ p = q;
+ /* Skip over the value. */
+ while (*p && *p != ',')
+ p++;
+ /* Advance past the comma. */
+ if (*p)
+ p++;
+ }
+ }
+ continue;
- /* Global functions were ignored here, but now they
- are put into the global psymtab like one would expect.
- They're also in the minimal symbol table. */
- case 'F':
- if (! pst)
- {
- int name_len = p - namestring;
- char *name = xmalloc (name_len + 1);
- memcpy (name, namestring, name_len);
- name[name_len] = '\0';
- function_outside_compilation_unit_complaint (name);
- xfree (name);
- }
- nlist.n_value += ANOFFSET (objfile->section_offsets,
- SECT_OFF_TEXT (objfile));
- /* Kludges for ELF/STABS with Sun ACC */
- last_function_name = namestring;
- /* Do not fix textlow==0 for .o or NLM files, as 0 is a legit
- value for the bottom of the text seg in those cases. */
- if (nlist.n_value == ANOFFSET (objfile->section_offsets,
- SECT_OFF_TEXT (objfile))
- && gdbarch_sofun_address_maybe_missing (current_gdbarch))
- {
- CORE_ADDR minsym_valu =
- find_stab_function_addr (namestring,
- pst ? pst->filename : NULL,
- objfile);
- /* find_stab_function_addr will return 0 if the minimal
- symbol wasn't found. (Unfortunately, this might also
- be a valid address.) Anyway, if it *does* return 0,
- it is likely that the value was set correctly to begin
- with... */
- if (minsym_valu != 0)
- nlist.n_value = minsym_valu;
- }
- if (pst && textlow_not_set
- && gdbarch_sofun_address_maybe_missing (current_gdbarch))
- {
- pst->textlow = nlist.n_value;
- textlow_not_set = 0;
- }
- /* End kludge. */
-
- /* Keep track of the start of the last function so we
- can handle end of function symbols. */
- last_function_start = nlist.n_value;
-
- /* In reordered executables this function may lie outside
- the bounds created by N_SO symbols. If that's the case
- use the address of this function as the low bound for
- the partial symbol table. */
- if (pst
- && (textlow_not_set
- || (nlist.n_value < pst->textlow
- && (nlist.n_value
- != ANOFFSET (objfile->section_offsets,
- SECT_OFF_TEXT (objfile))))))
- {
- pst->textlow = nlist.n_value;
- textlow_not_set = 0;
- }
- add_psymbol_to_list (namestring, p - namestring,
- VAR_DOMAIN, LOC_BLOCK,
- &objfile->global_psymbols,
- 0, nlist.n_value,
- psymtab_language, objfile);
- continue;
+ case 'c':
+ /* Constant, e.g. from "const" in Pascal. */
+ add_psymbol_to_list (sym_name, sym_len, 1,
+ VAR_DOMAIN, LOC_CONST,
+ &objfile->static_psymbols, 0,
+ psymtab_language, objfile);
+ continue;
- /* Two things show up here (hopefully); static symbols of
- local scope (static used inside braces) or extensions
- of structure symbols. We can ignore both. */
- case 'V':
- case '(':
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- case '8':
- case '9':
- case '-':
- case '#': /* for symbol identification (used in live ranges) */
- continue;
+ case 'f':
+ if (! pst)
+ {
+ int name_len = p - namestring;
+ char *name = xmalloc (name_len + 1);
- case ':':
- /* It is a C++ nested symbol. We don't need to record it
- (I don't think); if we try to look up foo::bar::baz,
- then symbols for the symtab containing foo should get
- read in, I think. */
- /* Someone says sun cc puts out symbols like
- /foo/baz/maclib::/usr/local/bin/maclib,
- which would get here with a symbol type of ':'. */
- continue;
+ memcpy (name, namestring, name_len);
+ name[name_len] = '\0';
+ function_outside_compilation_unit_complaint (name);
+ xfree (name);
+ }
+ nlist.n_value += ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT (objfile));
+ /* Kludges for ELF/STABS with Sun ACC. */
+ last_function_name = namestring;
+ /* Do not fix textlow==0 for .o or NLM files, as 0 is a legit
+ value for the bottom of the text seg in those cases. */
+ if (nlist.n_value == ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT (objfile))
+ && gdbarch_sofun_address_maybe_missing (gdbarch))
+ {
+ CORE_ADDR minsym_valu =
+ find_stab_function_addr (namestring,
+ pst ? pst->filename : NULL,
+ objfile);
+
+ /* find_stab_function_addr will return 0 if the minimal
+ symbol wasn't found. (Unfortunately, this might also
+ be a valid address.) Anyway, if it *does* return 0,
+ it is likely that the value was set correctly to begin
+ with... */
+ if (minsym_valu != 0)
+ nlist.n_value = minsym_valu;
+ }
+ if (pst && textlow_not_set
+ && gdbarch_sofun_address_maybe_missing (gdbarch))
+ {
+ pst->textlow = nlist.n_value;
+ textlow_not_set = 0;
+ }
+ /* End kludge. */
+
+ /* Keep track of the start of the last function so we
+ can handle end of function symbols. */
+ last_function_start = nlist.n_value;
+
+ /* In reordered executables this function may lie outside
+ the bounds created by N_SO symbols. If that's the case
+ use the address of this function as the low bound for
+ the partial symbol table. */
+ if (pst
+ && (textlow_not_set
+ || (nlist.n_value < pst->textlow
+ && (nlist.n_value
+ != ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT (objfile))))))
+ {
+ pst->textlow = nlist.n_value;
+ textlow_not_set = 0;
+ }
+ add_psymbol_to_list (sym_name, sym_len, 1,
+ VAR_DOMAIN, LOC_BLOCK,
+ &objfile->static_psymbols,
+ nlist.n_value, psymtab_language, objfile);
+ continue;
- default:
- /* Unexpected symbol descriptor. The second and subsequent stabs
- of a continued stab can show up here. The question is
- whether they ever can mimic a normal stab--it would be
- nice if not, since we certainly don't want to spend the
- time searching to the end of every string looking for
- a backslash. */
-
- complaint (&symfile_complaints, _("unknown symbol descriptor `%c'"),
- p[1]);
-
- /* Ignore it; perhaps it is an extension that we don't
- know about. */
- continue;
- }
+ /* Global functions were ignored here, but now they
+ are put into the global psymtab like one would expect.
+ They're also in the minimal symbol table. */
+ case 'F':
+ if (! pst)
+ {
+ int name_len = p - namestring;
+ char *name = xmalloc (name_len + 1);
+
+ memcpy (name, namestring, name_len);
+ name[name_len] = '\0';
+ function_outside_compilation_unit_complaint (name);
+ xfree (name);
+ }
+ nlist.n_value += ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT (objfile));
+ /* Kludges for ELF/STABS with Sun ACC. */
+ last_function_name = namestring;
+ /* Do not fix textlow==0 for .o or NLM files, as 0 is a legit
+ value for the bottom of the text seg in those cases. */
+ if (nlist.n_value == ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT (objfile))
+ && gdbarch_sofun_address_maybe_missing (gdbarch))
+ {
+ CORE_ADDR minsym_valu =
+ find_stab_function_addr (namestring,
+ pst ? pst->filename : NULL,
+ objfile);
+
+ /* find_stab_function_addr will return 0 if the minimal
+ symbol wasn't found. (Unfortunately, this might also
+ be a valid address.) Anyway, if it *does* return 0,
+ it is likely that the value was set correctly to begin
+ with... */
+ if (minsym_valu != 0)
+ nlist.n_value = minsym_valu;
+ }
+ if (pst && textlow_not_set
+ && gdbarch_sofun_address_maybe_missing (gdbarch))
+ {
+ pst->textlow = nlist.n_value;
+ textlow_not_set = 0;
+ }
+ /* End kludge. */
+
+ /* Keep track of the start of the last function so we
+ can handle end of function symbols. */
+ last_function_start = nlist.n_value;
+
+ /* In reordered executables this function may lie outside
+ the bounds created by N_SO symbols. If that's the case
+ use the address of this function as the low bound for
+ the partial symbol table. */
+ if (pst
+ && (textlow_not_set
+ || (nlist.n_value < pst->textlow
+ && (nlist.n_value
+ != ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT (objfile))))))
+ {
+ pst->textlow = nlist.n_value;
+ textlow_not_set = 0;
+ }
+ add_psymbol_to_list (sym_name, sym_len, 1,
+ VAR_DOMAIN, LOC_BLOCK,
+ &objfile->global_psymbols,
+ nlist.n_value, psymtab_language, objfile);
+ continue;
+
+ /* Two things show up here (hopefully); static symbols of
+ local scope (static used inside braces) or extensions
+ of structure symbols. We can ignore both. */
+ case 'V':
+ case '(':
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ case '8':
+ case '9':
+ case '-':
+ case '#': /* For symbol identification (used in live ranges). */
+ continue;
+
+ case ':':
+ /* It is a C++ nested symbol. We don't need to record it
+ (I don't think); if we try to look up foo::bar::baz,
+ then symbols for the symtab containing foo should get
+ read in, I think. */
+ /* Someone says sun cc puts out symbols like
+ /foo/baz/maclib::/usr/local/bin/maclib,
+ which would get here with a symbol type of ':'. */
+ continue;
+
+ default:
+ /* Unexpected symbol descriptor. The second and subsequent stabs
+ of a continued stab can show up here. The question is
+ whether they ever can mimic a normal stab--it would be
+ nice if not, since we certainly don't want to spend the
+ time searching to the end of every string looking for
+ a backslash. */
+
+ complaint (&symfile_complaints,
+ _("unknown symbol descriptor `%c'"),
+ p[1]);
+
+ /* Ignore it; perhaps it is an extension that we don't
+ know about. */
+ continue;
+ }
+ }
- case N_EXCL:
+ case N_EXCL:
- namestring = set_namestring (objfile, nlist);
+ namestring = set_namestring (objfile, &nlist);
/* Find the corresponding bincl and mark that psymtab on the
- psymtab dependency list */
+ psymtab dependency list. */
{
struct partial_symtab *needed_pst =
find_corresponding_bincl_psymtab (namestring, nlist.n_value);
if (dependencies_used >= dependencies_allocated)
{
struct partial_symtab **orig = dependency_list;
+
dependency_list =
(struct partial_symtab **)
alloca ((dependencies_allocated *= 2)
* sizeof (struct partial_symtab *)));
#ifdef DEBUG_INFO
fprintf_unfiltered (gdb_stderr,
- "Had to reallocate dependency list.\n");
+ "Had to reallocate "
+ "dependency list.\n");
fprintf_unfiltered (gdb_stderr,
"New dependencies allocated: %d\n",
dependencies_allocated);
}
continue;
- case N_ENDM:
+ case N_ENDM:
/* Solaris 2 end of module, finish current partial symbol table.
- end_psymtab will set pst->texthigh to the proper value, which
+ dbx_end_psymtab will set pst->texthigh to the proper value, which
is necessary if a module compiled without debugging info
follows this module. */
- if (pst && gdbarch_sofun_address_maybe_missing (current_gdbarch))
- {
- end_psymtab (pst, psymtab_include_list, includes_used,
- symnum * symbol_size,
- (CORE_ADDR) 0,
- dependency_list, dependencies_used, textlow_not_set);
- pst = (struct partial_symtab *) 0;
- includes_used = 0;
- dependencies_used = 0;
- }
+ if (pst && gdbarch_sofun_address_maybe_missing (gdbarch))
+ {
+ dbx_end_psymtab (objfile, pst,
+ psymtab_include_list, includes_used,
+ symnum * symbol_size,
+ (CORE_ADDR) 0, dependency_list,
+ dependencies_used, textlow_not_set);
+ pst = (struct partial_symtab *) 0;
+ includes_used = 0;
+ dependencies_used = 0;
+ has_line_numbers = 0;
+ }
continue;
- case N_RBRAC:
+ case N_RBRAC:
#ifdef HANDLE_RBRAC
HANDLE_RBRAC (nlist.n_value);
continue;
#endif
- case N_EINCL:
- case N_DSLINE:
- case N_BSLINE:
- case N_SSYM: /* Claim: Structure or union element.
+ case N_EINCL:
+ case N_DSLINE:
+ case N_BSLINE:
+ case N_SSYM: /* Claim: Structure or union element.
Hopefully, I can ignore this. */
- case N_ENTRY: /* Alternate entry point; can ignore. */
- case N_MAIN: /* Can definitely ignore this. */
- case N_CATCH: /* These are GNU C++ extensions */
- case N_EHDECL: /* that can safely be ignored here. */
- case N_LENG:
- case N_BCOMM:
- case N_ECOMM:
- case N_ECOML:
- case N_FNAME:
- case N_SLINE:
- case N_RSYM:
- case N_PSYM:
- case N_LBRAC:
- case N_NSYMS: /* Ultrix 4.0: symbol count */
- case N_DEFD: /* GNU Modula-2 */
- case N_ALIAS: /* SunPro F77: alias name, ignore for now. */
-
- case N_OBJ: /* useless types from Solaris */
- case N_OPT:
- case N_PATCH:
- /* These symbols aren't interesting; don't worry about them */
-
+ case N_ENTRY: /* Alternate entry point; can ignore. */
+ case N_MAIN: /* Can definitely ignore this. */
+ case N_CATCH: /* These are GNU C++ extensions */
+ case N_EHDECL: /* that can safely be ignored here. */
+ case N_LENG:
+ case N_BCOMM:
+ case N_ECOMM:
+ case N_ECOML:
+ case N_FNAME:
+ case N_SLINE:
+ case N_RSYM:
+ case N_PSYM:
+ case N_BNSYM:
+ case N_ENSYM:
+ case N_LBRAC:
+ case N_NSYMS: /* Ultrix 4.0: symbol count */
+ case N_DEFD: /* GNU Modula-2 */
+ case N_ALIAS: /* SunPro F77: alias name, ignore for now. */
+
+ case N_OBJ: /* Useless types from Solaris. */
+ case N_OPT:
+ case N_PATCH:
+ /* These symbols aren't interesting; don't worry about them. */
continue;
- default:
+ default:
/* If we haven't found it yet, ignore it. It's probably some
new type we don't know about yet. */
unknown_symtype_complaint (hex_string (nlist.n_type));
: lowest_text_address)
+ text_size;
- end_psymtab (pst, psymtab_include_list, includes_used,
- symnum * symbol_size,
- text_end > pst->texthigh ? text_end : pst->texthigh,
- dependency_list, dependencies_used, textlow_not_set);
+ dbx_end_psymtab (objfile, pst, psymtab_include_list, includes_used,
+ symnum * symbol_size,
+ text_end > pst->texthigh ? text_end : pst->texthigh,
+ dependency_list, dependencies_used, textlow_not_set);
}
do_cleanups (back_to);
SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR
is the address relative to which its symbols are (incremental) or 0
- (normal). */
-
+ (normal). */
static struct partial_symtab *
start_psymtab (struct objfile *objfile, char *filename, CORE_ADDR textlow,
struct partial_symbol **static_syms)
{
struct partial_symtab *result =
- start_psymtab_common (objfile, objfile->section_offsets,
- filename, textlow, global_syms, static_syms);
+ start_psymtab_common (objfile, filename, textlow,
+ global_syms, static_syms);
- result->read_symtab_private = (char *)
- obstack_alloc (&objfile->objfile_obstack, sizeof (struct symloc));
+ result->read_symtab_private =
+ XOBNEW (&objfile->objfile_obstack, struct symloc);
LDSYMOFF (result) = ldsymoff;
- result->read_symtab = dbx_psymtab_to_symtab;
+ result->read_symtab = dbx_read_symtab;
SYMBOL_SIZE (result) = symbol_size;
SYMBOL_OFFSET (result) = symbol_table_offset;
STRING_OFFSET (result) = string_table_offset;
FILE_STRING_OFFSET (result) = file_string_table_offset;
-#ifdef HAVE_ELF
- /* If we're handling an ELF file, drag some section-relocation info
- for this source file out of the ELF symbol table, to compensate for
- Sun brain death. This replaces the section_offsets in this psymtab,
- if successful. */
- elfstab_offset_sections (objfile, result);
-#endif
-
- /* Deduce the source language from the filename for this psymtab. */
+ /* Deduce the source language from the filename for this psymtab. */
psymtab_language = deduce_language_from_filename (filename);
return result;
}
-/* Close off the current usage of PST.
+/* Close off the current usage of PST.
Returns PST or NULL if the partial symtab was empty and thrown away.
FIXME: List variables and peculiarities of same. */
struct partial_symtab *
-end_psymtab (struct partial_symtab *pst, char **include_list, int num_includes,
- int capping_symbol_offset, CORE_ADDR capping_text,
- struct partial_symtab **dependency_list, int number_dependencies,
- int textlow_not_set)
+dbx_end_psymtab (struct objfile *objfile, struct partial_symtab *pst,
+ const char **include_list, int num_includes,
+ int capping_symbol_offset, CORE_ADDR capping_text,
+ struct partial_symtab **dependency_list,
+ int number_dependencies,
+ int textlow_not_set)
{
int i;
- struct objfile *objfile = pst->objfile;
+ struct gdbarch *gdbarch = get_objfile_arch (objfile);
if (capping_symbol_offset != -1)
LDSYMLEN (pst) = capping_symbol_offset - LDSYMOFF (pst);
last function in the file. */
if (pst->texthigh == 0 && last_function_name
- && gdbarch_sofun_address_maybe_missing (current_gdbarch))
+ && gdbarch_sofun_address_maybe_missing (gdbarch))
{
char *p;
int n;
- struct minimal_symbol *minsym;
+ struct bound_minimal_symbol minsym;
p = strchr (last_function_name, ':');
if (p == NULL)
p[n] = 0;
minsym = lookup_minimal_symbol (p, pst->filename, objfile);
- if (minsym == NULL)
+ if (minsym.minsym == NULL)
{
/* Sun Fortran appends an underscore to the minimal symbol name,
try again with an appended underscore if the minimal symbol
minsym = lookup_minimal_symbol (p, pst->filename, objfile);
}
- if (minsym)
- pst->texthigh = SYMBOL_VALUE_ADDRESS (minsym) + MSYMBOL_SIZE (minsym);
+ if (minsym.minsym)
+ pst->texthigh = (BMSYMBOL_VALUE_ADDRESS (minsym)
+ + MSYMBOL_SIZE (minsym.minsym));
last_function_name = NULL;
}
- if (!gdbarch_sofun_address_maybe_missing (current_gdbarch))
+ if (!gdbarch_sofun_address_maybe_missing (gdbarch))
;
- /* this test will be true if the last .o file is only data */
+ /* This test will be true if the last .o file is only data. */
else if (textlow_not_set)
pst->textlow = pst->texthigh;
else
if (p1->texthigh == 0 && p1->textlow != 0 && p1 != pst)
{
p1->texthigh = pst->textlow;
- /* if this file has only data, then make textlow match texthigh */
+ /* If this file has only data, then make textlow match
+ texthigh. */
if (p1->textlow == 0)
p1->textlow = p1->texthigh;
}
/* End of kludge for patching Solaris textlow and texthigh. */
- pst->n_global_syms =
- objfile->global_psymbols.next - (objfile->global_psymbols.list
- + pst->globals_offset);
- pst->n_static_syms =
- objfile->static_psymbols.next - (objfile->static_psymbols.list
- + pst->statics_offset);
+ end_psymtab_common (objfile, pst);
pst->number_of_dependencies = number_dependencies;
if (number_dependencies)
{
- pst->dependencies = (struct partial_symtab **)
- obstack_alloc (&objfile->objfile_obstack,
- number_dependencies * sizeof (struct partial_symtab *));
+ pst->dependencies = XOBNEWVEC (&objfile->objfile_obstack,
+ struct partial_symtab *,
+ number_dependencies);
memcpy (pst->dependencies, dependency_list,
number_dependencies * sizeof (struct partial_symtab *));
}
for (i = 0; i < num_includes; i++)
{
struct partial_symtab *subpst =
- allocate_psymtab (include_list[i], objfile);
+ allocate_psymtab (include_list[i], objfile);
- /* Copy the sesction_offsets array from the main psymtab. */
- subpst->section_offsets = pst->section_offsets;
subpst->read_symtab_private =
- (char *) obstack_alloc (&objfile->objfile_obstack,
- sizeof (struct symloc));
+ XOBNEW (&objfile->objfile_obstack, struct symloc);
LDSYMOFF (subpst) =
LDSYMLEN (subpst) =
subpst->textlow =
/* We could save slight bits of space by only making one of these,
shared by the entire set of include files. FIXME-someday. */
- subpst->dependencies = (struct partial_symtab **)
- obstack_alloc (&objfile->objfile_obstack,
- sizeof (struct partial_symtab *));
+ subpst->dependencies =
+ XOBNEW (&objfile->objfile_obstack, struct partial_symtab *);
subpst->dependencies[0] = pst;
subpst->number_of_dependencies = 1;
subpst->n_static_syms = 0;
subpst->readin = 0;
- subpst->symtab = 0;
+ subpst->compunit_symtab = 0;
subpst->read_symtab = pst->read_symtab;
}
- sort_pst_symbols (pst);
-
- /* If there is already a psymtab or symtab for a file of this name, remove it.
- (If there is a symtab, more drastic things also happen.)
- This happens in VxWorks. */
- free_named_symtabs (pst->filename);
-
if (num_includes == 0
&& number_dependencies == 0
&& pst->n_global_syms == 0
is not empty, but we don't realize that. Fixing that without slowing
things down might be tricky. */
- discard_psymtab (pst);
+ discard_psymtab (objfile, pst);
/* Indicate that psymtab was thrown away. */
- pst = (struct partial_symtab *) NULL;
+ pst = NULL;
}
return pst;
}
\f
static void
-dbx_psymtab_to_symtab_1 (struct partial_symtab *pst)
+dbx_psymtab_to_symtab_1 (struct objfile *objfile, struct partial_symtab *pst)
{
struct cleanup *old_chain;
int i;
- if (!pst)
- return;
-
if (pst->readin)
{
- fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in. \
-Shouldn't happen.\n",
+ fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in. "
+ "Shouldn't happen.\n",
pst->filename);
return;
}
- /* Read in all partial symtabs on which this one is dependent */
+ /* Read in all partial symtabs on which this one is dependent. */
for (i = 0; i < pst->number_of_dependencies; i++)
if (!pst->dependencies[i]->readin)
{
fputs_filtered ("and ", gdb_stdout);
wrap_here ("");
printf_filtered ("%s...", pst->dependencies[i]->filename);
- wrap_here (""); /* Flush output */
+ wrap_here (""); /* Flush output. */
gdb_flush (gdb_stdout);
}
- dbx_psymtab_to_symtab_1 (pst->dependencies[i]);
+ dbx_psymtab_to_symtab_1 (objfile, pst->dependencies[i]);
}
- if (LDSYMLEN (pst)) /* Otherwise it's a dummy */
+ if (LDSYMLEN (pst)) /* Otherwise it's a dummy. */
{
/* Init stuff necessary for reading in symbols */
stabsread_init ();
file_string_table_offset = FILE_STRING_OFFSET (pst);
symbol_size = SYMBOL_SIZE (pst);
- /* Read in this file's symbols */
- bfd_seek (pst->objfile->obfd, SYMBOL_OFFSET (pst), SEEK_SET);
- read_ofile_symtab (pst);
+ /* Read in this file's symbols. */
+ bfd_seek (objfile->obfd, SYMBOL_OFFSET (pst), SEEK_SET);
+ read_ofile_symtab (objfile, pst);
do_cleanups (old_chain);
}
}
/* Read in all of the symbols for a given psymtab for real.
- Be verbose about it if the user wants that. */
+ Be verbose about it if the user wants that. SELF is not NULL. */
static void
-dbx_psymtab_to_symtab (struct partial_symtab *pst)
+dbx_read_symtab (struct partial_symtab *self, struct objfile *objfile)
{
bfd *sym_bfd;
- struct cleanup *back_to = NULL;
- if (!pst)
- return;
-
- if (pst->readin)
+ if (self->readin)
{
- fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in. \
-Shouldn't happen.\n",
- pst->filename);
+ fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in. "
+ "Shouldn't happen.\n",
+ self->filename);
return;
}
- if (LDSYMLEN (pst) || pst->number_of_dependencies)
+ if (LDSYMLEN (self) || self->number_of_dependencies)
{
+ struct cleanup *back_to;
+
/* Print the message now, before reading the string table,
to avoid disconcerting pauses. */
if (info_verbose)
{
- printf_filtered ("Reading in symbols for %s...", pst->filename);
+ printf_filtered ("Reading in symbols for %s...", self->filename);
gdb_flush (gdb_stdout);
}
- sym_bfd = pst->objfile->obfd;
+ sym_bfd = objfile->obfd;
next_symbol_text_func = dbx_next_symbol_text;
- if (DBX_STAB_SECTION (pst->objfile))
+ back_to = make_cleanup (null_cleanup, NULL);
+
+ if (DBX_STAB_SECTION (objfile))
{
stabs_data
- = symfile_relocate_debug_section (pst->objfile->obfd,
- DBX_STAB_SECTION (pst->objfile),
+ = symfile_relocate_debug_section (objfile,
+ DBX_STAB_SECTION (objfile),
NULL);
+
if (stabs_data)
- back_to = make_cleanup (free_current_contents,
- (void *) &stabs_data);
+ make_cleanup (free_current_contents, (void *) &stabs_data);
}
- dbx_psymtab_to_symtab_1 (pst);
+ dbx_psymtab_to_symtab_1 (objfile, self);
- if (back_to)
- do_cleanups (back_to);
+ do_cleanups (back_to);
/* Match with global symbols. This only needs to be done once,
after all of the symtabs and dependencies have been read in. */
- scan_file_globals (pst->objfile);
+ scan_file_globals (objfile);
/* Finish up the debug error message. */
if (info_verbose)
}
}
-/* Read in a defined section of a specific object file's symbols. */
+/* Read in a defined section of a specific object file's symbols. */
static void
-read_ofile_symtab (struct partial_symtab *pst)
+read_ofile_symtab (struct objfile *objfile, struct partial_symtab *pst)
{
char *namestring;
struct external_nlist *bufp;
unsigned char type;
unsigned max_symnum;
bfd *abfd;
- struct objfile *objfile;
int sym_offset; /* Offset to start of symbols to read */
int sym_size; /* Size of symbols to read */
CORE_ADDR text_offset; /* Start of text segment for symbols */
int text_size; /* Size of text segment for symbols */
struct section_offsets *section_offsets;
- objfile = pst->objfile;
sym_offset = LDSYMOFF (pst);
sym_size = LDSYMLEN (pst);
text_offset = pst->textlow;
text_size = pst->texthigh - pst->textlow;
- /* This cannot be simply objfile->section_offsets because of
- elfstab_offset_sections() which initializes the psymtab section
- offsets information in a special way, and that is different from
- objfile->section_offsets. */
- section_offsets = pst->section_offsets;
+ section_offsets = objfile->section_offsets;
- current_objfile = objfile;
- subfile_stack = NULL;
+ dbxread_objfile = objfile;
stringtab_global = DBX_STRINGTAB (objfile);
- last_source_file = NULL;
+ set_last_source_file (NULL);
abfd = objfile->obfd;
- symfile_bfd = objfile->obfd; /* Implicit param to next_text_symbol */
+ symfile_bfd = objfile->obfd; /* Implicit param to next_text_symbol. */
symbuf_end = symbuf_idx = 0;
symbuf_read = 0;
symbuf_left = sym_offset + sym_size;
INTERNALIZE_SYMBOL (nlist, bufp, abfd);
OBJSTAT (objfile, n_stabs++);
- namestring = set_namestring (objfile, nlist);
+ namestring = set_namestring (objfile, &nlist);
processing_gcc_compilation = 0;
if (nlist.n_type == N_TEXT)
processing_gcc_compilation = 2;
if (tempstring[0] == bfd_get_symbol_leading_char (symfile_bfd))
++tempstring;
- if (strncmp (tempstring, "__gnu_compiled", 14) == 0)
+ if (startswith (tempstring, "__gnu_compiled"))
processing_gcc_compilation = 2;
}
-
- /* Try to select a C++ demangling based on the compilation unit
- producer. */
-
-#if 0
- /* For now, stay with AUTO_DEMANGLING for g++ output, as we don't
- know whether it will use the old style or v3 mangling. */
- if (processing_gcc_compilation)
- {
- if (AUTO_DEMANGLING)
- {
- set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
- }
- }
-#endif
}
else
{
symnum < max_symnum;
symnum++)
{
- QUIT; /* Allow this to be interruptable */
+ QUIT; /* Allow this to be interruptable. */
if (symbuf_idx == symbuf_end)
fill_symbuf (abfd);
bufp = &symbuf[symbuf_idx++];
type = bfd_h_get_8 (abfd, bufp->e_type);
- namestring = set_namestring (objfile, nlist);
+ namestring = set_namestring (objfile, &nlist);
if (type & N_STAB)
{
+ if (sizeof (nlist.n_value) > 4
+ /* We are a 64-bit debugger debugging a 32-bit program. */
+ && (type == N_LSYM || type == N_PSYM))
+ /* We have to be careful with the n_value in the case of N_LSYM
+ and N_PSYM entries, because they are signed offsets from frame
+ pointer, but we actually read them as unsigned 32-bit values.
+ This is not a problem for 32-bit debuggers, for which negative
+ values end up being interpreted correctly (as negative
+ offsets) due to integer overflow.
+ But we need to sign-extend the value for 64-bit debuggers,
+ or we'll end up interpreting negative values as very large
+ positive offsets. */
+ nlist.n_value = (nlist.n_value ^ 0x80000000) - 0x80000000;
process_one_symbol (type, nlist.n_desc, nlist.n_value,
namestring, section_offsets, objfile);
}
/* We skip checking for a new .o or -l file; that should never
- happen in this routine. */
+ happen in this routine. */
else if (type == N_TEXT)
{
/* I don't think this code will ever be executed, because
processing_gcc_compilation = 1;
else if (strcmp (namestring, GCC2_COMPILED_FLAG_SYMBOL) == 0)
processing_gcc_compilation = 2;
-
-#if 0
- /* For now, stay with AUTO_DEMANGLING for g++ output, as we don't
- know whether it will use the old style or v3 mangling. */
- if (AUTO_DEMANGLING)
- {
- set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
- }
-#endif
}
else if (type & N_EXT || type == (unsigned char) N_TEXT
- || type == (unsigned char) N_NBTEXT
- )
+ || type == (unsigned char) N_NBTEXT)
{
/* Global symbol: see if we came across a dbx defintion for
a corresponding symbol. If so, store the value. Remove
syms from the chain when their values are stored, but
search the whole chain, as there may be several syms from
- different files with the same name. */
+ different files with the same name. */
/* This is probably not true. Since the files will be read
in one at a time, each reference to a global symbol will
- be satisfied in each file as it appears. So we skip this
- section. */
+ be satisfied in each file as it appears. So we skip this
+ section. */
;
}
}
/* In a Solaris elf file, this variable, which comes from the
value of the N_SO symbol, will still be 0. Luckily, text_offset,
- which comes from pst->textlow is correct. */
+ which comes from pst->textlow is correct. */
if (last_source_start_addr == 0)
last_source_start_addr = text_offset;
if (last_source_start_addr > text_offset)
last_source_start_addr = text_offset;
- pst->symtab = end_symtab (text_offset + text_size, objfile,
- SECT_OFF_TEXT (objfile));
+ pst->compunit_symtab = end_symtab (text_offset + text_size,
+ SECT_OFF_TEXT (objfile));
end_stabs ();
- current_objfile = NULL;
+ dbxread_objfile = NULL;
}
\f
+/* Record the namespace that the function defined by SYMBOL was
+ defined in, if necessary. BLOCK is the associated block; use
+ OBSTACK for allocation. */
+
+static void
+cp_set_block_scope (const struct symbol *symbol,
+ struct block *block,
+ struct obstack *obstack)
+{
+ if (SYMBOL_DEMANGLED_NAME (symbol) != NULL)
+ {
+ /* Try to figure out the appropriate namespace from the
+ demangled name. */
+
+ /* FIXME: carlton/2003-04-15: If the function in question is
+ a method of a class, the name will actually include the
+ name of the class as well. This should be harmless, but
+ is a little unfortunate. */
+
+ const char *name = SYMBOL_DEMANGLED_NAME (symbol);
+ unsigned int prefix_len = cp_entire_prefix_len (name);
+
+ block_set_scope (block,
+ obstack_copy0 (obstack, name, prefix_len),
+ obstack);
+ }
+}
+
/* This handles a single symbol from the symbol-file, building symbols
into a GDB symtab. It takes these arguments and an implicit argument.
void
process_one_symbol (int type, int desc, CORE_ADDR valu, char *name,
- struct section_offsets *section_offsets,
+ const struct section_offsets *section_offsets,
struct objfile *objfile)
{
- struct context_stack *new;
+ struct gdbarch *gdbarch = get_objfile_arch (objfile);
+ struct context_stack *newobj;
/* This remembers the address of the start of a function. It is
used because in Solaris 2, N_LBRAC, N_RBRAC, and N_SLINE entries
are relative to the current function's start address. On systems
/* If this is nonzero, we've seen an N_SLINE since the start of the
current function. We use this to tell us to move the first sline
to the beginning of the function regardless of what its given
- value is. */
+ value is. */
static int sline_found_in_function = 1;
/* If this is nonzero, we've seen a non-gcc N_OPT symbol for this
/* Something is wrong if we see real data before seeing a source
file name. */
- if (last_source_file == NULL && type != (unsigned char) N_SO)
+ if (get_last_source_file () == NULL && type != (unsigned char) N_SO)
{
/* Ignore any symbols which appear before an N_SO symbol.
Currently no one puts symbols there, but we should deal
{
/* This N_FUN marks the end of a function. This closes off
the current block. */
+ struct block *block;
if (context_stack_depth <= 0)
{
which may have an N_FUN stabs at the end of the function,
but no N_SLINE stabs. */
if (sline_found_in_function)
- record_line (current_subfile, 0, last_function_start + valu);
+ {
+ CORE_ADDR addr = last_function_start + valu;
+
+ record_line (current_subfile, 0,
+ gdbarch_addr_bits_remove (gdbarch, addr));
+ }
within_function = 0;
- new = pop_context ();
+ newobj = pop_context ();
/* Make a block for the local symbols within. */
- finish_block (new->name, &local_symbols, new->old_blocks,
- new->start_addr, new->start_addr + valu,
- objfile);
+ block = finish_block (newobj->name, &local_symbols,
+ newobj->old_blocks, NULL,
+ newobj->start_addr, newobj->start_addr + valu);
+
+ /* For C++, set the block's scope. */
+ if (SYMBOL_LANGUAGE (newobj->name) == language_cplus)
+ cp_set_block_scope (newobj->name, block, &objfile->objfile_obstack);
/* May be switching to an assembler file which may not be using
block relative stabs, so reset the offset. */
/* Relocate for dynamic loading. */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT (objfile));
- valu = gdbarch_smash_text_address (current_gdbarch, valu);
+ valu = gdbarch_addr_bits_remove (gdbarch, valu);
last_function_start = valu;
goto define_a_symbol;
N_SO, the linker did not relocate them (sigh). */
valu += last_source_start_addr;
- new = push_context (desc, valu);
+ push_context (desc, valu);
break;
case N_RBRAC:
break;
}
- new = pop_context ();
- if (desc != new->depth)
+ newobj = pop_context ();
+ if (desc != newobj->depth)
lbrac_mismatch_complaint (symnum);
if (local_symbols != NULL)
2000 would output N_LSYM entries after N_LBRAC
entries. As a consequence, these symbols are simply
discarded. Complain if this is the case. */
- complaint (&symfile_complaints, _("\
-misplaced N_LBRAC entry; discarding local symbols which have \
-no enclosing block"));
+ complaint (&symfile_complaints,
+ _("misplaced N_LBRAC entry; discarding local "
+ "symbols which have no enclosing block"));
}
- local_symbols = new->locals;
+ local_symbols = newobj->locals;
if (context_stack_depth > 1)
{
/* Muzzle a compiler bug that makes end < start.
??? Which compilers? Is this ever harmful?. */
- if (new->start_addr > valu)
+ if (newobj->start_addr > valu)
{
complaint (&symfile_complaints,
_("block start larger than block end"));
- new->start_addr = valu;
+ newobj->start_addr = valu;
}
/* Make a block for the local symbols within. */
- finish_block (0, &local_symbols, new->old_blocks,
- new->start_addr, valu, objfile);
+ finish_block (0, &local_symbols, newobj->old_blocks, NULL,
+ newobj->start_addr, valu);
}
}
else
n_opt_found = 0;
- if (last_source_file)
+ if (get_last_source_file ())
{
/* Check if previous symbol was also an N_SO (with some
sanity checks). If so, that one was actually the
directory name, and the current one is the real file
- name. Patch things up. */
+ name. Patch things up. */
if (previous_stab_code == (unsigned char) N_SO)
{
patch_subfile_names (current_subfile, name);
- break; /* Ignore repeated SOs */
+ break; /* Ignore repeated SOs. */
}
- end_symtab (valu, objfile, SECT_OFF_TEXT (objfile));
+ end_symtab (valu, SECT_OFF_TEXT (objfile));
end_stabs ();
}
function_start_offset = 0;
start_stabs ();
- start_symtab (name, NULL, valu);
+ start_symtab (objfile, name, NULL, valu);
record_debugformat ("stabs");
break;
in the compilation of the main source file (whose name was
given in the N_SO symbol). Relocate for dynamic loading. */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT (objfile));
- start_subfile (name, current_subfile->dirname);
+ start_subfile (name);
break;
case N_BINCL:
push_subfile ();
add_new_header_file (name, valu);
- start_subfile (name, current_subfile->dirname);
+ start_subfile (name);
break;
case N_EINCL:
- start_subfile (pop_subfile (), current_subfile->dirname);
+ start_subfile (pop_subfile ());
break;
case N_EXCL:
if (within_function && sline_found_in_function == 0)
{
- if (processing_gcc_compilation == 2)
- record_line (current_subfile, desc, last_function_start);
- else
- record_line (current_subfile, desc, valu);
+ CORE_ADDR addr = processing_gcc_compilation == 2 ?
+ last_function_start : valu;
+
+ record_line (current_subfile, desc,
+ gdbarch_addr_bits_remove (gdbarch, addr));
sline_found_in_function = 1;
}
else
- record_line (current_subfile, desc, valu);
+ record_line (current_subfile, desc,
+ gdbarch_addr_bits_remove (gdbarch, valu));
break;
case N_BCOMM:
p = strchr (name, ':');
if (p != 0 && p[1] == 'S')
{
- /* The linker relocated it. We don't want to add an
- elfstab_offset_sections-type offset, but we *do*
+ /* The linker relocated it. We don't want to add a
+ Sun-stabs Tfoo.foo-like offset, but we *do*
want to add whatever solib.c passed to
symbol_file_add as addr (this is known to affect
- SunOS 4, and I suspect ELF too). Since
- elfstab_offset_sections currently does not muck
- with the text offset (there is no Ttext.text
- symbol), we can get addr from the text offset. If
- elfstab_offset_sections ever starts dealing with
- the text offset, and we still need to do this, we
- need to invent a SECT_OFF_ADDR_KLUDGE or something. */
+ SunOS 4, and I suspect ELF too). Since there is no
+ Ttext.text symbol, we can get addr from the text offset. */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT (objfile));
goto define_a_symbol;
}
{
int deftype;
char *colon_pos = strchr (name, ':');
+
if (colon_pos == NULL)
deftype = '\0';
else
if (type == N_FUN
&& valu == ANOFFSET (section_offsets,
SECT_OFF_TEXT (objfile))
- && gdbarch_sofun_address_maybe_missing (current_gdbarch))
+ && gdbarch_sofun_address_maybe_missing (gdbarch))
{
CORE_ADDR minsym_valu =
- find_stab_function_addr (name, last_source_file, objfile);
+ find_stab_function_addr (name, get_last_source_file (),
+ objfile);
/* The function find_stab_function_addr will return
0 if the minimal symbol wasn't found.
if (context_stack_depth > 0)
{
- new = pop_context ();
+ struct block *block;
+
+ newobj = pop_context ();
/* Make a block for the local symbols within. */
- finish_block (new->name, &local_symbols, new->old_blocks,
- new->start_addr, valu, objfile);
+ block = finish_block (newobj->name, &local_symbols,
+ newobj->old_blocks, NULL,
+ newobj->start_addr, valu);
+
+ /* For C++, set the block's scope. */
+ if (SYMBOL_LANGUAGE (newobj->name) == language_cplus)
+ cp_set_block_scope (newobj->name, block,
+ &objfile->objfile_obstack);
}
- new = push_context (0, valu);
- new->name = define_symbol (valu, name, desc, type, objfile);
+ newobj = push_context (0, valu);
+ newobj->name = define_symbol (valu, name, desc, type, objfile);
break;
default:
if (strcmp (name, GCC2_COMPILED_FLAG_SYMBOL) == 0)
{
processing_gcc_compilation = 2;
-#if 0 /* Works, but is experimental. -fnf */
- /* For now, stay with AUTO_DEMANGLING for g++ output, as
- we don't know whether it will use the old style or v3
- mangling. */
- if (AUTO_DEMANGLING)
- {
- set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
- }
-#endif
}
else
n_opt_found = 1;
objfile it is in; If there is more than one N_MAIN, choose
the one in the symfile_objfile; If there is more than one
N_MAIN within a given objfile, complain() and choose
- arbitrarily. (kingdon) */
+ arbitrarily. (kingdon) */
if (name != NULL)
- set_main_name (name);
+ set_objfile_main_name (objfile, name, language_unknown);
break;
/* The following symbol types can be ignored. */
Generally this is used so that an alias can refer to its main
symbol. */
+ gdb_assert (name);
if (name[0] == '#')
{
/* Initialize symbol reference names and determine if this is a
OBJFILE is the object file we are reading symbols from.
ADDR is the address relative to which the symbols are (e.g.
the base address of the text segment).
- MAINLINE is true if we are reading the main symbol
- table (as opposed to a shared lib or dynamically loaded file).
TEXTADDR is the address of the text section.
TEXTSIZE is the size of the text section.
STABSECTS is the list of .stab sections in OBJFILE.
.stabstr section exists.
This routine is mostly copied from dbx_symfile_init and dbx_symfile_read,
- adjusted for coff details. */
+ adjusted for coff details. */
void
-coffstab_build_psymtabs (struct objfile *objfile, int mainline,
+coffstab_build_psymtabs (struct objfile *objfile,
CORE_ADDR textaddr, unsigned int textsize,
struct stab_section_list *stabsects,
file_ptr stabstroffset, unsigned int stabstrsize)
/* There is already a dbx_symfile_info allocated by our caller.
It might even contain some info from the coff symtab to help us. */
- info = objfile->deprecated_sym_stab_info;
+ info = DBX_SYMFILE_INFO (objfile);
DBX_TEXT_ADDR (objfile) = textaddr;
DBX_TEXT_SIZE (objfile) = textsize;
/* In a coff file, we've already installed the minimal symbols that came
from the coff (non-stab) symbol table, so always act like an
- incremental load here. */
+ incremental load here. */
if (stabsects->next == NULL)
{
stabsize = bfd_section_size (sym_bfd, stabsects->section);
OBJFILE is the object file we are reading symbols from.
ADDR is the address relative to which the symbols are (e.g.
the base address of the text segment).
- MAINLINE is true if we are reading the main symbol
- table (as opposed to a shared lib or dynamically loaded file).
STABSECT is the BFD section information for the .stab section.
STABSTROFFSET and STABSTRSIZE define the location in OBJFILE where the
.stabstr section exists.
This routine is mostly copied from dbx_symfile_init and dbx_symfile_read,
- adjusted for elf details. */
+ adjusted for elf details. */
void
-elfstab_build_psymtabs (struct objfile *objfile, int mainline,
- asection *stabsect,
+elfstab_build_psymtabs (struct objfile *objfile, asection *stabsect,
file_ptr stabstroffset, unsigned int stabstrsize)
{
int val;
bfd *sym_bfd = objfile->obfd;
char *name = bfd_get_filename (sym_bfd);
struct dbx_symfile_info *info;
- struct cleanup *back_to = NULL;
+ struct cleanup *back_to = make_cleanup (null_cleanup, NULL);
/* There is already a dbx_symfile_info allocated by our caller.
It might even contain some info from the ELF symtab to help us. */
- info = objfile->deprecated_sym_stab_info;
+ info = DBX_SYMFILE_INFO (objfile);
/* Find the first and last text address. dbx_symfile_read seems to
want this. */
symbuf_read = 0;
symbuf_left = bfd_section_size (objfile->obfd, stabsect);
- stabs_data = symfile_relocate_debug_section (objfile->obfd, stabsect, NULL);
+ stabs_data = symfile_relocate_debug_section (objfile, stabsect, NULL);
if (stabs_data)
- back_to = make_cleanup (free_current_contents, (void *) &stabs_data);
+ make_cleanup (free_current_contents, (void *) &stabs_data);
/* In an elf file, we've already installed the minimal symbols that came
from the elf (non-stab) symbol table, so always act like an
case it does, it will install them itself. */
dbx_symfile_read (objfile, 0);
- if (back_to)
- do_cleanups (back_to);
+ do_cleanups (back_to);
}
\f
/* Scan and build partial symbols for a file with special sections for stabs
OBJFILE is the object file we are reading symbols from.
ADDR is the address relative to which the symbols are (e.g. the base address
of the text segment).
- MAINLINE is true if we are reading the main symbol table (as opposed to a
- shared lib or dynamically loaded file).
STAB_NAME is the name of the section that contains the stabs.
STABSTR_NAME is the name of the section that contains the stab strings.
- This routine is mostly copied from dbx_symfile_init and dbx_symfile_read. */
+ This routine is mostly copied from dbx_symfile_init and
+ dbx_symfile_read. */
void
-stabsect_build_psymtabs (struct objfile *objfile, int mainline, char *stab_name,
+stabsect_build_psymtabs (struct objfile *objfile, char *stab_name,
char *stabstr_name, char *text_name)
{
int val;
asection *stabsect;
asection *stabstrsect;
asection *text_sect;
+ struct dbx_symfile_info *dbx;
stabsect = bfd_get_section_by_name (sym_bfd, stab_name);
stabstrsect = bfd_get_section_by_name (sym_bfd, stabstr_name);
return;
if (!stabstrsect)
- error (_("stabsect_build_psymtabs: Found stabs (%s), but not string \
-section (%s)"),
+ error (_("stabsect_build_psymtabs: Found stabs (%s), "
+ "but not string section (%s)"),
stab_name, stabstr_name);
- objfile->deprecated_sym_stab_info = (struct dbx_symfile_info *)
- xmalloc (sizeof (struct dbx_symfile_info));
- memset (objfile->deprecated_sym_stab_info, 0,
- sizeof (struct dbx_symfile_info));
+ dbx = XCNEW (struct dbx_symfile_info);
+ set_objfile_data (objfile, dbx_objfile_data_key, dbx);
text_sect = bfd_get_section_by_name (sym_bfd, text_name);
if (!text_sect)
DBX_SYMCOUNT (objfile) = bfd_section_size (sym_bfd, stabsect)
/ DBX_SYMBOL_SIZE (objfile);
DBX_STRINGTAB_SIZE (objfile) = bfd_section_size (sym_bfd, stabstrsect);
- DBX_SYMTAB_OFFSET (objfile) = stabsect->filepos; /* XXX - FIXME: POKING INSIDE BFD DATA STRUCTURES */
+ DBX_SYMTAB_OFFSET (objfile) = stabsect->filepos; /* XXX - FIXME: POKING
+ INSIDE BFD DATA
+ STRUCTURES */
if (DBX_STRINGTAB_SIZE (objfile) > bfd_get_size (sym_bfd))
error (_("ridiculous string table size: %d bytes"),
DBX_STRINGTAB_SIZE (objfile));
DBX_STRINGTAB (objfile) = (char *)
- obstack_alloc (&objfile->objfile_obstack, DBX_STRINGTAB_SIZE (objfile) + 1);
+ obstack_alloc (&objfile->objfile_obstack,
+ DBX_STRINGTAB_SIZE (objfile) + 1);
OBJSTAT (objfile, sz_strtab += DBX_STRINGTAB_SIZE (objfile) + 1);
/* Now read in the string table in one big gulp. */
val = bfd_get_section_contents (sym_bfd, /* bfd */
stabstrsect, /* bfd section */
DBX_STRINGTAB (objfile), /* input buffer */
- 0, /* offset into section */
- DBX_STRINGTAB_SIZE (objfile)); /* amount to read */
+ 0, /* offset into section */
+ DBX_STRINGTAB_SIZE (objfile)); /* amount to
+ read */
if (!val)
perror_with_name (name);
free_header_files ();
init_header_files ();
- /* Now, do an incremental load */
+ /* Now, do an incremental load. */
processing_acc_compilation = 1;
dbx_symfile_read (objfile, 0);
}
\f
-static struct sym_fns aout_sym_fns =
+static const struct sym_fns aout_sym_fns =
{
- bfd_target_aout_flavour,
- dbx_new_init, /* sym_new_init: init anything gbl to entire symtab */
- dbx_symfile_init, /* sym_init: read initial info, setup for sym_read() */
- dbx_symfile_read, /* sym_read: read a symbol file into symtab */
- dbx_symfile_finish, /* sym_finish: finished with file, cleanup */
- default_symfile_offsets, /* sym_offsets: parse user's offsets to
- internal form */
- default_symfile_segments, /* sym_segments: Get segment information from
- a file. */
- NULL, /* sym_read_linetable */
- NULL /* next: pointer to next struct sym_fns */
+ dbx_new_init, /* init anything gbl to entire symtab */
+ dbx_symfile_init, /* read initial info, setup for sym_read() */
+ dbx_symfile_read, /* read a symbol file into symtab */
+ NULL, /* sym_read_psymbols */
+ dbx_symfile_finish, /* finished with file, cleanup */
+ default_symfile_offsets, /* parse user's offsets to internal form */
+ default_symfile_segments, /* Get segment information from a file. */
+ NULL,
+ default_symfile_relocate, /* Relocate a debug section. */
+ NULL, /* sym_probe_fns */
+ &psym_functions
};
void
_initialize_dbxread (void)
{
- add_symtab_fns (&aout_sym_fns);
+ add_symtab_fns (bfd_target_aout_flavour, &aout_sym_fns);
+
+ dbx_objfile_data_key
+ = register_objfile_data_with_cleanup (NULL, dbx_free_symfile_info);
}