/* Read dbx symbol tables and convert to internal format, for GDB.
- Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
+ Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Free Software Foundation, Inc.
This file is part of GDB.
#include "command.h"
#include "target.h"
#include "gdbcore.h" /* for bfd stuff */
-#include "libbfd.h" /* FIXME Secret internal BFD stuff (bfd_read) */
#include "libaout.h" /* FIXME Secret internal BFD stuff for a.out */
#include "symfile.h"
#include "objfiles.h"
#define SEEK_SET 0
#define SEEK_CUR 1
#endif
-
+\f
/* Each partial symbol table entry contains a pointer to private data for the
- read_symtab() function to use when expanding a partial symbol table entry
- to a full symbol table entry.
-
- For dbxread this structure contains the offset within the file symbol table
- of first local symbol for this file, and length (in bytes) of the section
- of the symbol table devoted to this file's symbols (actually, the section
- bracketed may contain more than just this file's symbols). It also contains
- further information needed to locate the symbols if they are in an ELF file.
+ sym_read function to use when expanding a partial symbol table entry
+ to a full symbol table entry. */
- If ldsymlen is 0, the only reason for this thing's existence is the
- dependency list. Nothing else will happen when it is read in. */
+struct symloc {
-#define LDSYMOFF(p) (((struct symloc *)((p)->read_symtab_private))->ldsymoff)
-#define LDSYMLEN(p) (((struct symloc *)((p)->read_symtab_private))->ldsymlen)
-#define SYMLOC(p) ((struct symloc *)((p)->read_symtab_private))
-#define SYMBOL_SIZE(p) (SYMLOC(p)->symbol_size)
-#define SYMBOL_OFFSET(p) (SYMLOC(p)->symbol_offset)
-#define STRING_OFFSET(p) (SYMLOC(p)->string_offset)
-#define FILE_STRING_OFFSET(p) (SYMLOC(p)->file_string_offset)
+ /* Offset within the file symbol table of first local symbol for this
+ file. */
-struct symloc {
int ldsymoff;
+
+ /* Length (in bytes) of the section of the symbol table devoted to
+ this file's symbols (actually, the section bracketed may contain
+ more than just this file's symbols). If ldsymlen is 0, the only
+ reason for this thing's existence is the dependency list. Nothing
+ else will happen when it is read in. */
+
int ldsymlen;
+
+ /* The size of each symbol in the symbol file (in external form). */
+
int symbol_size;
+
+ /* Further information needed to locate the symbols if they are in
+ an ELF file. */
+
int symbol_offset;
int string_offset;
int file_string_offset;
};
+#define LDSYMOFF(p) (((struct symloc *)((p)->read_symtab_private))->ldsymoff)
+#define LDSYMLEN(p) (((struct symloc *)((p)->read_symtab_private))->ldsymlen)
+#define SYMLOC(p) ((struct symloc *)((p)->read_symtab_private))
+#define SYMBOL_SIZE(p) (SYMLOC(p)->symbol_size)
+#define SYMBOL_OFFSET(p) (SYMLOC(p)->symbol_offset)
+#define STRING_OFFSET(p) (SYMLOC(p)->string_offset)
+#define FILE_STRING_OFFSET(p) (SYMLOC(p)->file_string_offset)
+
+\f
/* Macro to determine which symbols to ignore when reading the first symbol
of a file. Some machines override this definition. */
#ifndef IGNORE_SYMBOL
#define IGNORE_SYMBOL(type) (type == (int)N_NSYMS)
#endif
-/* Macro for name of symbol to indicate a file compiled with gcc. */
-#ifndef GCC_COMPILED_FLAG_SYMBOL
-#define GCC_COMPILED_FLAG_SYMBOL "gcc_compiled."
-#endif
-
-/* Macro for name of symbol to indicate a file compiled with gcc2. */
-#ifndef GCC2_COMPILED_FLAG_SYMBOL
-#define GCC2_COMPILED_FLAG_SYMBOL "gcc2_compiled."
-#endif
-
-/* Define this as 1 if a pcc declaration of a char or short argument
- gives the correct address. Otherwise assume pcc gives the
- address of the corresponding int, which is not the same on a
- big-endian machine. */
-
-#ifndef BELIEVE_PCC_PROMOTION
-#define BELIEVE_PCC_PROMOTION 0
-#endif
-
/* Remember what we deduced to be the source language of this psymtab. */
static enum language psymtab_language = language_unknown;
static unsigned int file_string_table_offset;
static unsigned int next_file_string_table_offset;
+/* .o and NLM files contain unrelocated addresses which are based at 0. When
+ non-zero, this flag disables some of the special cases for Solaris elf+stab
+ text addresses at location 0. */
+
+static int symfile_relocatable = 0;
+
+ /* If this is nonzero, N_LBRAC, N_RBRAC, and N_SLINE entries are relative
+ to the function start address. */
+
+static int block_address_function_relative = 0;
+\f
+/* The lowest text address we have yet encountered. This is needed
+ because in an a.out file, there is no header field which tells us
+ what address the program is actually going to be loaded at, so we
+ need to make guesses based on the symbols (which *are* relocated to
+ reflect the address it will be loaded at). */
+static CORE_ADDR lowest_text_address;
+
/* Complaints about the symbols we have encountered. */
struct complaint lbrac_complaint =
{"unknown symbol type %s", 0, 0};
struct complaint unknown_symchar_complaint =
- {"unknown symbol type character `%c'", 0, 0};
+ {"unknown symbol descriptor `%c'", 0, 0};
struct complaint lbrac_rbrac_complaint =
{"block start larger than block end", 0, 0};
{"N_LBRAC/N_RBRAC symbol mismatch at symtab pos %d", 0, 0};
struct complaint repeated_header_complaint =
- {"\"repeated\" header file not previously seen, at symtab pos %d", 0, 0};
-
-struct complaint repeated_header_name_complaint =
- {"\"repeated\" header file not previously seen, named %s", 0, 0};
+ {"\"repeated\" header file %s not previously seen, at symtab pos %d", 0, 0};
\f
/* During initial symbol readin, we need to have a structure to keep
track of which psymtabs have which bincls in them. This structure
static void
init_header_files PARAMS ((void));
-static struct pending *
-copy_pending PARAMS ((struct pending *, int, struct pending *));
-
static void
read_ofile_symtab PARAMS ((struct partial_symtab *));
static void
dbx_psymtab_to_symtab_1 PARAMS ((struct partial_symtab *));
+static void
+read_dbx_dynamic_symtab PARAMS ((struct section_offsets *,
+ struct objfile *objfile));
+
static void
read_dbx_symtab PARAMS ((struct section_offsets *, struct objfile *,
CORE_ADDR, int));
static void
init_bincl_list PARAMS ((int, struct objfile *));
-static void
-init_psymbol_list PARAMS ((struct objfile *));
-
static char *
dbx_next_symbol_text PARAMS ((void));
add_this_object_header_file (i);
return;
}
- complain (&repeated_header_complaint, symnum);
- complain (&repeated_header_name_complaint, name);
+ complain (&repeated_header_complaint, name, symnum);
}
/* Add to this file a "new" header file: definitions for its types follow.
f->length *= 2;
f->vector = (struct type **)
xrealloc (f->vector, f->length * sizeof (struct type *));
- bzero (&f->vector[f->length / 2],
- f->length * sizeof (struct type *) / 2);
+ memset (&f->vector[f->length / 2],
+ '\0', f->length * sizeof (struct type *) / 2);
}
return &f->vector[index];
}
struct objfile *objfile;
{
enum minimal_symbol_type ms_type;
+ int section;
switch (type)
{
- case N_TEXT | N_EXT: ms_type = mst_text; break;
- case N_DATA | N_EXT: ms_type = mst_data; break;
- case N_BSS | N_EXT: ms_type = mst_bss; break;
- case N_ABS | N_EXT: ms_type = mst_abs; break;
+ case N_TEXT | N_EXT:
+ ms_type = mst_text;
+ section = SECT_OFF_TEXT;
+ break;
+ case N_DATA | N_EXT:
+ ms_type = mst_data;
+ section = SECT_OFF_DATA;
+ break;
+ case N_BSS | N_EXT:
+ ms_type = mst_bss;
+ section = SECT_OFF_BSS;
+ break;
+ case N_ABS | N_EXT:
+ ms_type = mst_abs;
+ section = -1;
+ break;
#ifdef N_SETV
- case N_SETV | N_EXT: ms_type = mst_data; break;
+ case N_SETV | N_EXT:
+ ms_type = mst_data;
+ section = SECT_OFF_DATA;
+ break;
case N_SETV:
/* I don't think this type actually exists; since a N_SETV is the result
of going over many .o files, it doesn't make sense to have one
file local. */
ms_type = mst_file_data;
+ section = SECT_OFF_DATA;
break;
#endif
case N_TEXT:
- /* Don't put gcc_compiled, __gnu_compiled_cplus, and friends into
- the minimal symbols, because if there is also another symbol
- at the same address (e.g. the first function of the file),
- lookup_minimal_symbol_by_pc would have no way of getting the
- right one. */
- if (name[0] == 'g'
- && (strcmp (name, GCC_COMPILED_FLAG_SYMBOL) == 0
- || strcmp (name, GCC2_COMPILED_FLAG_SYMBOL) == 0))
- return;
-
- {
- char *tempstring = name;
- if (tempstring[0] == bfd_get_symbol_leading_char (objfile->obfd))
- ++tempstring;
- if (STREQN (tempstring, "__gnu_compiled", 14))
- return;
- }
-
case N_NBTEXT:
case N_FN:
case N_FN_SEQ:
ms_type = mst_file_text;
+ section = SECT_OFF_TEXT;
break;
-
case N_DATA:
ms_type = mst_file_data;
if (VTBL_PREFIX_P ((tempstring)))
ms_type = mst_data;
}
+ section = SECT_OFF_DATA;
break;
-
case N_BSS:
ms_type = mst_file_bss;
+ section = SECT_OFF_BSS;
+ break;
+ default:
+ ms_type = mst_unknown;
+ section = -1;
break;
-
- default: ms_type = mst_unknown; break;
}
- prim_record_minimal_symbol
+ if ((ms_type == mst_file_text || ms_type == mst_text)
+ && address < lowest_text_address)
+ lowest_text_address = address;
+
+ prim_record_minimal_symbol_and_info
(obsavestring (name, strlen (name), &objfile -> symbol_obstack),
address,
- ms_type);
+ ms_type,
+ NULL,
+ section,
+ objfile);
}
\f
/* Scan and build partial symbols for a symbol file.
int val;
struct cleanup *back_to;
+ val = strlen (objfile->name);
+
+ /* .o and .nlm files are relocatables with text, data and bss segs based at
+ 0. This flag disables special (Solaris stabs-in-elf only) fixups for
+ symbols with a value of 0. XXX - This is a Krock. Solaris stabs-in-elf
+ should be fixed to determine pst->textlow without using this text seg of
+ 0 fixup crap. */
+
+ if (strcmp (&objfile->name[val-2], ".o") == 0
+ || strcmp (&objfile->name[val-4], ".nlm") == 0)
+ symfile_relocatable = 1;
+
+ /* This is true for Solaris (and all other systems which put stabs
+ in sections, hopefully, since it would be silly to do things
+ differently from Solaris), and false for SunOS4 and other a.out
+ file formats. */
+ block_address_function_relative =
+ ((0 == strncmp (bfd_get_target (objfile->obfd), "elf", 3))
+ || (0 == strncmp (bfd_get_target (objfile->obfd), "som", 3))
+ || (0 == strncmp (bfd_get_target (objfile->obfd), "coff", 4))
+ || (0 == strncmp (bfd_get_target (objfile->obfd), "nlm", 3)));
+
sym_bfd = objfile->obfd;
val = bfd_seek (objfile->obfd, DBX_SYMTAB_OFFSET (objfile), SEEK_SET);
if (val < 0)
perror_with_name (objfile->name);
/* If we are reinitializing, or if we have never loaded syms yet, init */
- if (mainline || objfile->global_psymbols.size == 0 || objfile->static_psymbols.size == 0)
- init_psymbol_list (objfile);
+ if (mainline
+ || objfile->global_psymbols.size == 0
+ || objfile->static_psymbols.size == 0)
+ init_psymbol_list (objfile, DBX_SYMCOUNT (objfile));
symbol_size = DBX_SYMBOL_SIZE (objfile);
symbol_table_offset = DBX_SYMTAB_OFFSET (objfile);
bfd_section_vma (sym_bfd, DBX_TEXT_SECT (objfile)),
bfd_section_size (sym_bfd, DBX_TEXT_SECT (objfile)));
+ /* Add the dynamic symbols. */
+
+ read_dbx_dynamic_symtab (section_offsets, objfile);
+
/* Install any minimal symbols that have been collected as the current
minimal symbols for this objfile. */
install_minimal_symbols (objfile);
- if (!have_partial_symbols ()) {
- wrap_here ("");
- printf_filtered ("(no debugging symbols found)...");
- wrap_here ("");
- }
-
do_cleanups (back_to);
}
unsigned char size_temp[DBX_STRINGTAB_SIZE_SIZE];
/* Allocate struct to keep track of the symfile */
- objfile->sym_private = (PTR)
+ objfile->sym_stab_info = (PTR)
xmmalloc (objfile -> md, sizeof (struct dbx_symfile_info));
/* FIXME POKING INSIDE BFD DATA STRUCTURES */
dbx_symfile_finish (objfile)
struct objfile *objfile;
{
- if (objfile->sym_private != NULL)
+ if (objfile->sym_stab_info != NULL)
{
- mfree (objfile -> md, objfile->sym_private);
+ mfree (objfile -> md, objfile->sym_stab_info);
}
free_header_files ();
}
/* The address in memory of the string table of the object file we are
reading (which might not be the "main" object file, but might be a
- shared library or some other dynamically loaded thing). This is set
- by read_dbx_symtab when building psymtabs, and by read_ofile_symtab
- when building symtabs, and is used only by next_symbol_text. */
+ shared library or some other dynamically loaded thing). This is
+ set by read_dbx_symtab when building psymtabs, and by
+ read_ofile_symtab when building symtabs, and is used only by
+ next_symbol_text. FIXME: If that is true, we don't need it when
+ building psymtabs, right? */
static char *stringtab_global;
/* Refill the symbol table input buffer
+ file_string_table_offset;
}
\f
-/* Initializes storage for all of the partial symbols that will be
- created by read_dbx_symtab and subsidiaries. */
-
-static void
-init_psymbol_list (objfile)
- struct objfile *objfile;
-{
- /* Free any previously allocated psymbol lists. */
- if (objfile -> global_psymbols.list)
- mfree (objfile -> md, (PTR)objfile -> global_psymbols.list);
- if (objfile -> static_psymbols.list)
- mfree (objfile -> md, (PTR)objfile -> static_psymbols.list);
-
- /* Current best guess is that there are approximately a twentieth
- of the total symbols (in a debugging file) are global or static
- oriented symbols */
- objfile -> global_psymbols.size = DBX_SYMCOUNT (objfile) / 10;
- objfile -> static_psymbols.size = DBX_SYMCOUNT (objfile) / 10;
- objfile -> global_psymbols.next = objfile -> global_psymbols.list = (struct partial_symbol *)
- xmmalloc (objfile -> md, objfile -> global_psymbols.size * sizeof (struct partial_symbol));
- objfile -> static_psymbols.next = objfile -> static_psymbols.list = (struct partial_symbol *)
- xmmalloc (objfile -> md, objfile -> static_psymbols.size * sizeof (struct partial_symbol));
-}
-
/* Initialize the list of bincls to contain none and have some
allocated. */
&& STREQ (name, bincl->name))
return bincl->pst;
+ complain (&repeated_header_complaint, name, symnum);
return (struct partial_symtab *) 0;
}
bincls_allocated = 0;
}
+/* Scan a SunOs dynamic symbol table for symbols of interest and
+ add them to the minimal symbol table. */
+
+static void
+read_dbx_dynamic_symtab (section_offsets, objfile)
+ struct section_offsets *section_offsets;
+ struct objfile *objfile;
+{
+ bfd *abfd = objfile->obfd;
+ struct cleanup *back_to;
+ int counter;
+ long dynsym_size;
+ long dynsym_count;
+ asymbol **dynsyms;
+ asymbol **symptr;
+ arelent **relptr;
+ long dynrel_size;
+ long dynrel_count;
+ arelent **dynrels;
+ CORE_ADDR sym_value;
+ char *name;
+
+ /* Check that the symbol file has dynamic symbols that we know about.
+ bfd_arch_unknown can happen if we are reading a sun3 symbol file
+ on a sun4 host (and vice versa) and bfd is not configured
+ --with-target=all. This would trigger an assertion in bfd/sunos.c,
+ so we ignore the dynamic symbols in this case. */
+ if (bfd_get_flavour (abfd) != bfd_target_aout_flavour
+ || (bfd_get_file_flags (abfd) & DYNAMIC) == 0
+ || bfd_get_arch (abfd) == bfd_arch_unknown)
+ return;
+
+ dynsym_size = bfd_get_dynamic_symtab_upper_bound (abfd);
+ if (dynsym_size < 0)
+ return;
+
+ dynsyms = (asymbol **) xmalloc (dynsym_size);
+ back_to = make_cleanup (free, dynsyms);
+
+ dynsym_count = bfd_canonicalize_dynamic_symtab (abfd, dynsyms);
+ if (dynsym_count < 0)
+ {
+ do_cleanups (back_to);
+ return;
+ }
+
+ /* Enter dynamic symbols into the minimal symbol table
+ if this is a stripped executable. */
+ if (bfd_get_symcount (abfd) <= 0)
+ {
+ symptr = dynsyms;
+ for (counter = 0; counter < dynsym_count; counter++, symptr++)
+ {
+ asymbol *sym = *symptr;
+ asection *sec;
+ int type;
+
+ sec = bfd_get_section (sym);
+
+ /* BFD symbols are section relative. */
+ sym_value = sym->value + sec->vma;
+
+ if (bfd_get_section_flags (abfd, sec) & SEC_CODE)
+ {
+ sym_value += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+ type = N_TEXT;
+ }
+ else if (bfd_get_section_flags (abfd, sec) & SEC_DATA)
+ {
+ sym_value += ANOFFSET (section_offsets, SECT_OFF_DATA);
+ type = N_DATA;
+ }
+ else if (bfd_get_section_flags (abfd, sec) & SEC_ALLOC)
+ {
+ sym_value += ANOFFSET (section_offsets, SECT_OFF_BSS);
+ type = N_BSS;
+ }
+ else
+ continue;
+
+ if (sym->flags & BSF_GLOBAL)
+ type |= N_EXT;
+
+ record_minimal_symbol ((char *) bfd_asymbol_name (sym), sym_value,
+ type, objfile);
+ }
+ }
+
+ /* Symbols from shared libraries have a dynamic relocation entry
+ that points to the associated slot in the procedure linkage table.
+ We make a mininal symbol table entry with type mst_solib_trampoline
+ at the address in the procedure linkage table. */
+ dynrel_size = bfd_get_dynamic_reloc_upper_bound (abfd);
+ if (dynrel_size < 0)
+ {
+ do_cleanups (back_to);
+ return;
+ }
+
+ dynrels = (arelent **) xmalloc (dynrel_size);
+ make_cleanup (free, dynrels);
+
+ dynrel_count = bfd_canonicalize_dynamic_reloc (abfd, dynrels, dynsyms);
+ if (dynrel_count < 0)
+ {
+ do_cleanups (back_to);
+ return;
+ }
+
+ for (counter = 0, relptr = dynrels;
+ counter < dynrel_count;
+ counter++, relptr++)
+ {
+ arelent *rel = *relptr;
+ CORE_ADDR address =
+ rel->address + ANOFFSET (section_offsets, SECT_OFF_DATA);
+
+ switch (bfd_get_arch (abfd))
+ {
+ case bfd_arch_sparc:
+ if (rel->howto->type != RELOC_JMP_SLOT)
+ continue;
+ break;
+ case bfd_arch_m68k:
+ /* `16' is the type BFD produces for a jump table relocation. */
+ if (rel->howto->type != 16)
+ continue;
+
+ /* Adjust address in the jump table to point to
+ the start of the bsr instruction. */
+ address -= 2;
+ break;
+ default:
+ continue;
+ }
+
+ name = (char *) bfd_asymbol_name (*rel->sym_ptr_ptr);
+ prim_record_minimal_symbol
+ (obsavestring (name, strlen (name), &objfile -> symbol_obstack),
+ address,
+ mst_solib_trampoline,
+ objfile);
+ }
+
+ do_cleanups (back_to);
+}
+
/* Given pointers to an a.out symbol table in core containing dbx
style data, setup partial_symtab's describing each source file for
which debugging information is available.
struct cleanup *back_to;
bfd *abfd;
- /* End of the text segment of the executable file. */
- CORE_ADDR end_of_text_addr;
-
/* Current partial symtab */
struct partial_symtab *pst;
last_source_file = NULL;
-#ifdef END_OF_TEXT_DEFAULT
- end_of_text_addr = END_OF_TEXT_DEFAULT;
-#else
- end_of_text_addr = text_addr + section_offsets->offsets[SECT_OFF_TEXT]
- + text_size; /* Relocate */
-#endif
+ lowest_text_address = (CORE_ADDR)-1;
symfile_bfd = objfile->obfd; /* For next_text_symbol */
abfd = objfile->obfd;
if (((unsigned)bufp->n_strx + file_string_table_offset) >= \
DBX_STRINGTAB_SIZE (objfile)) { \
complain (&string_table_offset_complaint, symnum); \
- namestring = "foo"; \
+ namestring = "<bad string table offset>"; \
} else \
namestring = bufp->n_strx + file_string_table_offset + \
DBX_STRINGTAB (objfile)
if (pst)
{
end_psymtab (pst, psymtab_include_list, includes_used,
- symnum * symbol_size, end_of_text_addr,
+ symnum * symbol_size,
+ (lowest_text_address == (CORE_ADDR)-1
+ ? (text_addr + section_offsets->offsets[SECT_OFF_TEXT])
+ : lowest_text_address)
+ + text_size,
dependency_list, dependencies_used);
}
return result;
}
-/* Close off the current usage of a partial_symbol table entry. This
- involves setting the correct number of includes (with a realloc),
- setting the high text mark, setting the symbol length in the
- executable, and setting the length of the global and static lists
- of psymbols.
+/* Close off the current usage of PST.
+ Returns PST or NULL if the partial symtab was empty and thrown away.
- The global symbols and static symbols are then seperately sorted.
+ FIXME: List variables and peculiarities of same. */
- Then the partial symtab is put on the global list.
- *** List variables and peculiarities of same. ***
- */
-
-void
+struct partial_symtab *
end_psymtab (pst, include_list, num_includes, capping_symbol_offset,
capping_text, dependency_list, number_dependencies)
struct partial_symtab *pst;
CORE_ADDR capping_text;
struct partial_symtab **dependency_list;
int number_dependencies;
-/* struct partial_symbol *capping_global, *capping_static;*/
{
int i;
- struct partial_symtab *p1;
struct objfile *objfile = pst -> objfile;
if (capping_symbol_offset != -1)
LDSYMLEN(pst) = capping_symbol_offset - LDSYMOFF(pst);
pst->texthigh = capping_text;
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
/* Under Solaris, the N_SO symbols always have a value of 0,
instead of the usual address of the .o file. Therefore,
we have to do some tricks to fill in texthigh and textlow.
The first trick is in partial-stab.h: if we see a static
or global function, and the textlow for the current pst
is still 0, then we use that function's address for
- the textlow of the pst.
+ the textlow of the pst. */
- Now, to fill in texthigh, we remember the last function seen
+ /* Now, to fill in texthigh, we remember the last function seen
in the .o file (also in partial-stab.h). Also, there's a hack in
bfd/elf.c and gdb/elfread.c to pass the ELF st_size field
to here via the misc_info field. Therefore, we can fill in
a reliable texthigh by taking the address plus size of the
- last function in the file.
-
- Unfortunately, that does not cover the case where the last function
- in the file is static. See the paragraph below for more comments
- on this situation.
-
- Finally, if we have a valid textlow for the current file, we run
- down the partial_symtab_list filling in previous texthighs that
- are still unknown. */
+ last function in the file. */
if (pst->texthigh == 0 && last_function_name) {
char *p;
strncpy (p, last_function_name, n);
p[n] = 0;
- minsym = lookup_minimal_symbol (p, objfile);
+ minsym = lookup_minimal_symbol (p, pst->filename, objfile);
- if (minsym) {
+ if (minsym)
pst->texthigh = SYMBOL_VALUE_ADDRESS (minsym) +
- (int) MSYMBOL_INFO (minsym);
- } else {
- /* This file ends with a static function, and it's
- difficult to imagine how hard it would be to track down
- the elf symbol. Luckily, most of the time no one will notice,
- since the next file will likely be compiled with -g, so
- the code below will copy the first fuction's start address
- back to our texthigh variable. (Also, if this file is the
- last one in a dynamically linked program, texthigh already
- has the right value.) If the next file isn't compiled
- with -g, then the last function in this file winds up owning
- all of the text space up to the next -g file, or the end (minus
- shared libraries). This only matters for single stepping,
- and even then it will still work, except that it will single
- step through all of the covered functions, instead of setting
- breakpoints around them as it usualy does. This makes it
- pretty slow, but at least it doesn't fail.
-
- We can fix this with a fairly big change to bfd, but we need
- to coordinate better with Cygnus if we want to do that. FIXME. */
- }
+ (long) MSYMBOL_INFO (minsym);
+
last_function_name = NULL;
}
/* this test will be true if the last .o file is only data */
if (pst->textlow == 0)
+ /* This loses if the text section really starts at address zero
+ (generally true when we are debugging a .o file, for example).
+ That is why this whole thing is inside SOFUN_ADDRESS_MAYBE_MISSING. */
pst->textlow = pst->texthigh;
/* If we know our own starting text address, then walk through all other
own ending address to our starting address, nor to set addresses on
`dependency' files that have both textlow and texthigh zero. */
if (pst->textlow) {
+ struct partial_symtab *p1;
+
ALL_OBJFILE_PSYMTABS (objfile, p1) {
if (p1->texthigh == 0 && p1->textlow != 0 && p1 != pst) {
p1->texthigh = pst->textlow;
}
/* End of kludge for patching Solaris textlow and texthigh. */
-
+#endif /* SOFUN_ADDRESS_MAYBE_MISSING. */
pst->n_global_syms =
objfile->global_psymbols.next - (objfile->global_psymbols.list + pst->globals_offset);
free_named_symtabs (pst->filename);
if (num_includes == 0
- && number_dependencies == 0
- && pst->n_global_syms == 0
- && pst->n_static_syms == 0) {
- /* Throw away this psymtab, it's empty. We can't deallocate it, since
- it is on the obstack, but we can forget to chain it on the list. */
- struct partial_symtab *prev_pst;
-
- /* First, snip it out of the psymtab chain */
-
- if (pst->objfile->psymtabs == pst)
- pst->objfile->psymtabs = pst->next;
- else
- for (prev_pst = pst->objfile->psymtabs; prev_pst; prev_pst = pst->next)
- if (prev_pst->next == pst)
- prev_pst->next = pst->next;
-
- /* Next, put it on a free list for recycling */
-
- pst->next = pst->objfile->free_psymtabs;
- pst->objfile->free_psymtabs = pst;
- }
+ && number_dependencies == 0
+ && pst->n_global_syms == 0
+ && pst->n_static_syms == 0)
+ {
+ /* Throw away this psymtab, it's empty. We can't deallocate it, since
+ it is on the obstack, but we can forget to chain it on the list. */
+ /* Empty psymtabs happen as a result of header files which don't have
+ any symbols in them. There can be a lot of them. But this check
+ is wrong, in that a psymtab with N_SLINE entries but nothing else
+ is not empty, but we don't realize that. Fixing that without slowing
+ things down might be tricky. */
+ struct partial_symtab *prev_pst;
+
+ /* First, snip it out of the psymtab chain */
+
+ if (pst->objfile->psymtabs == pst)
+ pst->objfile->psymtabs = pst->next;
+ else
+ for (prev_pst = pst->objfile->psymtabs; prev_pst; prev_pst = pst->next)
+ if (prev_pst->next == pst)
+ prev_pst->next = pst->next;
+
+ /* Next, put it on a free list for recycling */
+
+ pst->next = pst->objfile->free_psymtabs;
+ pst->objfile->free_psymtabs = pst;
+
+ /* Indicate that psymtab was thrown away. */
+ pst = (struct partial_symtab *)NULL;
+ }
+ return pst;
}
\f
static void
if (pst->readin)
{
- fprintf (stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
+ fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
pst->filename);
return;
}
/* Inform about additional files that need to be read in. */
if (info_verbose)
{
- fputs_filtered (" ", stdout);
+ fputs_filtered (" ", gdb_stdout);
wrap_here ("");
- fputs_filtered ("and ", stdout);
+ fputs_filtered ("and ", gdb_stdout);
wrap_here ("");
printf_filtered ("%s...", pst->dependencies[i]->filename);
wrap_here (""); /* Flush output */
- fflush (stdout);
+ gdb_flush (gdb_stdout);
}
dbx_psymtab_to_symtab_1 (pst->dependencies[i]);
}
if (pst->readin)
{
- fprintf (stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
+ fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
pst->filename);
return;
}
if (info_verbose)
{
printf_filtered ("Reading in symbols for %s...", pst->filename);
- fflush (stdout);
+ gdb_flush (gdb_stdout);
}
sym_bfd = pst->objfile->obfd;
unsigned char type;
unsigned max_symnum;
register bfd *abfd;
- struct symtab *rtn;
struct objfile *objfile;
int sym_offset; /* Offset to start of symbols to read */
int sym_size; /* Size of symbols to read */
processing_gcc_compilation = 0;
if (bufp->n_type == N_TEXT)
{
+ const char *tempstring = namestring;
+
if (STREQ (namestring, GCC_COMPILED_FLAG_SYMBOL))
processing_gcc_compilation = 1;
else if (STREQ (namestring, GCC2_COMPILED_FLAG_SYMBOL))
processing_gcc_compilation = 2;
+ if (tempstring[0] == bfd_get_symbol_leading_char (symfile_bfd))
+ ++tempstring;
+ if (STREQN (tempstring, "__gnu_compiled", 14))
+ processing_gcc_compilation = 2;
}
/* Try to select a C++ demangling based on the compilation unit
used to relocate these symbol types rather than SECTION_OFFSETS. */
static CORE_ADDR function_start_offset;
- /* If this is nonzero, N_LBRAC, N_RBRAC, and N_SLINE entries are relative
- to the function start address. */
- int block_address_function_relative;
-
/* If this is nonzero, we've seen a non-gcc N_OPT symbol for this source
file. Used to detect the SunPRO solaris compiler. */
- int n_opt_found;
+ static int n_opt_found;
/* The stab type used for the definition of the last function.
N_STSYM or N_GSYM for SunOS4 acc; N_FUN for other compilers. */
static int function_stab_type = 0;
- /* This is true for Solaris (and all other stabs-in-elf systems, hopefully,
- since it would be silly to do things differently from Solaris), and
- false for SunOS4 and other a.out file formats. */
- block_address_function_relative =
- 0 == strncmp (bfd_get_target (objfile->obfd), "elf", 3);
-
if (!block_address_function_relative)
/* N_LBRAC, N_RBRAC and N_SLINE entries are not relative to the
function start address, so just use the text offset. */
/* This "symbol" just indicates the start of an inner lexical
context within a function. */
+ /* Ignore extra outermost context from SunPRO cc and acc. */
+ if (n_opt_found && desc == 1)
+ break;
+
#if defined(BLOCK_ADDRESS_ABSOLUTE)
/* Relocate for dynamic loading (?). */
valu += function_start_offset;
/* This "symbol" just indicates the end of an inner lexical
context that was started with N_LBRAC. */
+ /* Ignore extra outermost context from SunPRO cc and acc. */
+ if (n_opt_found && desc == 1)
+ break;
+
#if defined(BLOCK_ADDRESS_ABSOLUTE)
/* Relocate for dynamic loading (?). */
valu += function_start_offset;
if (!VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))
local_symbols = new->locals;
- /* If this is not the outermost LBRAC...RBRAC pair in the
- function, its local symbols preceded it, and are the ones
- just recovered from the context stack. Defined the block for them.
-
- If this is the outermost LBRAC...RBRAC pair, there is no
- need to do anything; leave the symbols that preceded it
- to be attached to the function's own block. However, if
- it is so, we need to indicate that we just moved outside
- of the function. */
- if (local_symbols
- && (context_stack_depth
- > !VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation)))
+ if (context_stack_depth
+ > !VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))
{
- /* FIXME Muzzle a compiler bug that makes end < start. */
- if (new->start_addr > valu)
+ /* This is not the outermost LBRAC...RBRAC pair in the function,
+ its local symbols preceded it, and are the ones just recovered
+ from the context stack. Define the block for them (but don't
+ bother if the block contains no symbols. Should we complain
+ on blocks without symbols? I can't think of any useful purpose
+ for them). */
+ if (local_symbols != NULL)
{
- complain (&lbrac_rbrac_complaint);
- new->start_addr = valu;
+ /* Muzzle a compiler bug that makes end < start. (which
+ compilers? Is this ever harmful?). */
+ if (new->start_addr > valu)
+ {
+ complain (&lbrac_rbrac_complaint);
+ new->start_addr = valu;
+ }
+ /* Make a block for the local symbols within. */
+ finish_block (0, &local_symbols, new->old_blocks,
+ new->start_addr, valu, objfile);
}
- /* Make a block for the local symbols within. */
- finish_block (0, &local_symbols, new->old_blocks,
- new->start_addr, valu, objfile);
}
else
{
+ /* This is the outermost LBRAC...RBRAC pair. There is no
+ need to do anything; leave the symbols that preceded it
+ to be attached to the function's own block. We need to
+ indicate that we just moved outside of the function. */
within_function = 0;
}
+
if (VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))
/* Now pop locals of block just finished. */
local_symbols = new->locals;
end_symtab (valu, 0, 0, objfile, SECT_OFF_TEXT);
end_stabs ();
}
+
+ /* Null name means this just marks the end of text for this .o file.
+ Don't start a new symtab in this case. */
+ if (*name == '\000')
+ break;
+
start_stabs ();
start_symtab (name, NULL, valu);
break;
-
case N_SOL:
/* This type of symbol indicates the start of data for
a sub-source-file, one whose contents were copied or
break;
case N_BCOMM:
- if (common_block)
- {
- static struct complaint msg = {
- "Invalid symbol data: common within common at symtab pos %d",
- 0, 0};
- complain (&msg, symnum);
- }
- common_block = local_symbols;
- common_block_i = local_symbols ? local_symbols->nsyms : 0;
+ common_block_start (name, objfile);
break;
case N_ECOMM:
- /* Symbols declared since the BCOMM are to have the common block
- start address added in when we know it. common_block points to
- the first symbol after the BCOMM in the local_symbols list;
- copy the list and hang it off the symbol for the common block name
- for later fixup. */
- {
- int i;
- struct symbol *sym =
- (struct symbol *) xmmalloc (objfile -> md, sizeof (struct symbol));
- memset (sym, 0, sizeof *sym);
- SYMBOL_NAME (sym) = savestring (name, strlen (name));
- SYMBOL_CLASS (sym) = LOC_BLOCK;
- SYMBOL_NAMESPACE (sym) = (enum namespace)((long)
- copy_pending (local_symbols, common_block_i, common_block));
- i = hashname (SYMBOL_NAME (sym));
- SYMBOL_VALUE_CHAIN (sym) = global_sym_chain[i];
- global_sym_chain[i] = sym;
- common_block = 0;
- break;
- }
+ common_block_end (objfile);
+ break;
/* The following symbol types need to have the appropriate offset added
to their value; then we process symbol definitions in the name. */
case N_STSYM: /* Static symbol in data seg */
case N_LCSYM: /* Static symbol in BSS seg */
case N_ROSYM: /* Static symbol in Read-only data seg */
- /* HORRID HACK DEPT. However, it's Sun's furgin' fault. FIXME.
- Solaris2's stabs-in-coff makes *most* symbols relative
- but leaves a few absolute. N_STSYM and friends sit on the fence.
+ /* HORRID HACK DEPT. However, it's Sun's furgin' fault.
+ Solaris2's stabs-in-elf makes *most* symbols relative
+ but leaves a few absolute (at least for Solaris 2.1 and version
+ 2.0.1 of the SunPRO compiler). N_STSYM and friends sit on the fence.
.stab "foo:S...",N_STSYM is absolute (ld relocates it)
.stab "foo:V...",N_STSYM is relative (section base subtracted).
This leaves us no choice but to search for the 'S' or 'V'...
call level, which we really don't want to do). */
{
char *p;
- p = strchr (name, ':');
- if (p != 0 && p[1] == 'S')
+
+ /* .o files and NLMs have non-zero text seg offsets, but don't need
+ their static syms offset in this fashion. XXX - This is really a
+ crock that should be fixed in the solib handling code so that I
+ don't have to work around it here. */
+
+ if (!symfile_relocatable)
{
- /* FIXME! We relocate it by the TEXT offset, in case the
- whole module moved in memory. But this is wrong, since
- the sections can side around independently. */
- valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
- goto define_a_symbol;
+ p = strchr (name, ':');
+ if (p != 0 && p[1] == 'S')
+ {
+ /* The linker relocated it. We don't want to add an
+ elfstab_offset_sections-type offset, but we *do* want
+ to add whatever solib.c passed to symbol_file_add as
+ addr (this is known to affect SunOS4, and I suspect ELF
+ too). Since elfstab_offset_sections currently does not
+ muck with the text offset (there is no Ttext.text
+ symbol), we can get addr from the text offset. If
+ elfstab_offset_sections ever starts dealing with the
+ text offset, and we still need to do this, we need to
+ invent a SECT_OFF_ADDR_KLUDGE or something. */
+ valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+ goto define_a_symbol;
+ }
}
/* Since it's not the kludge case, re-dispatch to the right handler. */
switch (type) {
case N_NBBSS:
case N_NBSTS:
case N_NBLCS:
- complain (&unknown_symtype_complaint, local_hex_string(type));
+ complain (&unknown_symtype_complaint, local_hex_string (type));
/* FALLTHROUGH */
/* The following symbol types don't need the address field relocated,
case 'F':
function_stab_type = type;
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+ /* Deal with the SunPRO 3.0 compiler which omits the address
+ from N_FUN symbols. */
+ if (type == N_FUN
+ && valu == ANOFFSET (section_offsets, SECT_OFF_TEXT))
+ {
+ struct minimal_symbol *msym;
+ char *p;
+ int n;
+
+ p = strchr (name, ':');
+ if (p == NULL)
+ p = name;
+ n = p - name;
+ p = alloca (n + 1);
+ strncpy (p, name, n);
+ p[n] = 0;
+
+ msym = lookup_minimal_symbol (p, last_source_file,
+ objfile);
+ if (msym)
+ valu = SYMBOL_VALUE_ADDRESS (msym);
+ }
+#endif
+
#ifdef SUN_FIXED_LBRAC_BUG
/* The Sun acc compiler, under SunOS4, puts out
functions with N_GSYM or N_STSYM. The problem is
previous function. This means that we can use the
minimal symbol table to get the address. */
- if (type == N_GSYM || type == N_STSYM)
+ /* Starting with release 3.0, the Sun acc compiler,
+ under SunOS4, puts out functions with N_FUN and a value
+ of zero. This gets relocated to the start of the text
+ segment of the module, which is no good either.
+ Under SunOS4 we can deal with this as N_SLINE and N_SO
+ entries contain valid absolute addresses.
+ Release 3.0 acc also puts out N_OPT entries, which makes
+ it possible to discern acc from cc or gcc. */
+
+ if (type == N_GSYM || type == N_STSYM
+ || (type == N_FUN
+ && n_opt_found && !block_address_function_relative))
{
struct minimal_symbol *m;
int l = colon_pos - name;
previous_stab_code = type;
}
\f
-/* Copy a pending list, used to record the contents of a common
- block for later fixup. We copy the symbols starting with all
- symbols in BEG, and ending with the symbols which are in
- END at index ENDI. */
-static struct pending *
-copy_pending (beg, endi, end)
- struct pending *beg;
- int endi;
- struct pending *end;
+/* FIXME: The only difference between this and elfstab_build_psymtabs is
+ the call to install_minimal_symbols for elf. If the differences are
+ really that small, the code should be shared. */
+
+/* Scan and build partial symbols for an coff symbol file.
+ The coff file has already been processed to get its minimal symbols.
+
+ This routine is the equivalent of dbx_symfile_init and dbx_symfile_read
+ rolled into one.
+
+ OBJFILE is the object file we are reading symbols from.
+ ADDR is the address relative to which the symbols are (e.g.
+ the base address of the text segment).
+ MAINLINE is true if we are reading the main symbol
+ table (as opposed to a shared lib or dynamically loaded file).
+ STABOFFSET and STABSIZE define the location in OBJFILE where the .stab
+ section exists.
+ STABSTROFFSET and STABSTRSIZE define the location in OBJFILE where the
+ .stabstr section exists.
+
+ This routine is mostly copied from dbx_symfile_init and dbx_symfile_read,
+ adjusted for coff details. */
+
+void
+coffstab_build_psymtabs (objfile, section_offsets, mainline,
+ staboffset, stabsize,
+ stabstroffset, stabstrsize)
+ struct objfile *objfile;
+ struct section_offsets *section_offsets;
+ int mainline;
+ file_ptr staboffset;
+ unsigned int stabsize;
+ file_ptr stabstroffset;
+ unsigned int stabstrsize;
{
- struct pending *new = 0;
- struct pending *next;
- int j;
+ int val;
+ bfd *sym_bfd = objfile->obfd;
+ char *name = bfd_get_filename (sym_bfd);
+ struct dbx_symfile_info *info;
- /* Copy all the struct pendings before end. */
- for (next = beg; next != NULL && next != end; next = next->next)
- {
- for (j = 0; j < next->nsyms; j++)
- add_symbol_to_list (next->symbol[j], &new);
- }
+ /* There is already a dbx_symfile_info allocated by our caller.
+ It might even contain some info from the coff symtab to help us. */
+ info = (struct dbx_symfile_info *) objfile->sym_stab_info;
+
+ DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
+ if (!DBX_TEXT_SECT (objfile))
+ error ("Can't find .text section in symbol file");
- /* Copy however much of END we need. */
- for (j = endi; j < end->nsyms; j++)
- add_symbol_to_list (end->symbol[j], &new);
+#define COFF_STABS_SYMBOL_SIZE 12 /* XXX FIXME XXX */
+ DBX_SYMBOL_SIZE (objfile) = COFF_STABS_SYMBOL_SIZE;
+ DBX_SYMCOUNT (objfile) = stabsize / DBX_SYMBOL_SIZE (objfile);
+ DBX_STRINGTAB_SIZE (objfile) = stabstrsize;
+ DBX_SYMTAB_OFFSET (objfile) = staboffset;
+
+ if (stabstrsize > bfd_get_size (sym_bfd))
+ error ("ridiculous string table size: %d bytes", stabstrsize);
+ DBX_STRINGTAB (objfile) = (char *)
+ obstack_alloc (&objfile->psymbol_obstack, stabstrsize+1);
+
+ /* Now read in the string table in one big gulp. */
- return new;
+ val = bfd_seek (sym_bfd, stabstroffset, SEEK_SET);
+ if (val < 0)
+ perror_with_name (name);
+ val = bfd_read (DBX_STRINGTAB (objfile), stabstrsize, 1, sym_bfd);
+ if (val != stabstrsize)
+ perror_with_name (name);
+
+ stabsread_new_init ();
+ buildsym_new_init ();
+ free_header_files ();
+ init_header_files ();
+
+ processing_acc_compilation = 1;
+
+ /* In a coff file, we've already installed the minimal symbols that came
+ from the coff (non-stab) symbol table, so always act like an
+ incremental load here. */
+ dbx_symfile_read (objfile, section_offsets, 0);
}
\f
/* Scan and build partial symbols for an ELF symbol file.
/* There is already a dbx_symfile_info allocated by our caller.
It might even contain some info from the ELF symtab to help us. */
- info = (struct dbx_symfile_info *) objfile->sym_private;
+ info = (struct dbx_symfile_info *) objfile->sym_stab_info;
DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
if (!DBX_TEXT_SECT (objfile))
DBX_STRINGTAB_SIZE (objfile) = stabstrsize;
DBX_SYMTAB_OFFSET (objfile) = staboffset;
- if (stabstrsize < 0 /* FIXME: stabstrsize is unsigned; never true! */
- || stabstrsize > bfd_get_size (sym_bfd))
+ if (stabstrsize > bfd_get_size (sym_bfd))
error ("ridiculous string table size: %d bytes", stabstrsize);
DBX_STRINGTAB (objfile) = (char *)
obstack_alloc (&objfile->psymbol_obstack, stabstrsize+1);
dbx_symfile_read (objfile, section_offsets, 0);
}
\f
-/* Scan and build partial symbols for a PA symbol file.
- This PA file has already been processed to get its minimal symbols.
+/* Scan and build partial symbols for a file with special sections for stabs
+ and stabstrings. The file has already been processed to get its minimal
+ symbols, and any other symbols that might be necessary to resolve GSYMs.
+
+ This routine is the equivalent of dbx_symfile_init and dbx_symfile_read
+ rolled into one.
OBJFILE is the object file we are reading symbols from.
- ADDR is the address relative to which the symbols are (e.g.
- the base address of the text segment).
- MAINLINE is true if we are reading the main symbol
- table (as opposed to a shared lib or dynamically loaded file).
+ ADDR is the address relative to which the symbols are (e.g. the base address
+ of the text segment).
+ MAINLINE is true if we are reading the main symbol table (as opposed to a
+ shared lib or dynamically loaded file).
+ STAB_NAME is the name of the section that contains the stabs.
+ STABSTR_NAME is the name of the section that contains the stab strings.
- */
+ This routine is mostly copied from dbx_symfile_init and dbx_symfile_read. */
void
-pastab_build_psymtabs (objfile, section_offsets, mainline)
+stabsect_build_psymtabs (objfile, section_offsets, mainline, stab_name,
+ stabstr_name, text_name)
struct objfile *objfile;
struct section_offsets *section_offsets;
int mainline;
+ char *stab_name;
+ char *stabstr_name;
+ char *text_name;
{
+ int val;
+ bfd *sym_bfd = objfile->obfd;
+ char *name = bfd_get_filename (sym_bfd);
+ asection *stabsect;
+ asection *stabstrsect;
+
+ stabsect = bfd_get_section_by_name (sym_bfd, stab_name);
+ stabstrsect = bfd_get_section_by_name (sym_bfd, stabstr_name);
+
+ if (!stabsect)
+ return;
+
+ if (!stabstrsect)
+ error ("stabsect_build_psymtabs: Found stabs (%s), but not string section (%s)",
+ stab_name, stabstr_name);
+
+ objfile->sym_stab_info = (PTR) xmalloc (sizeof (struct dbx_symfile_info));
+ memset (DBX_SYMFILE_INFO (objfile), 0, sizeof (struct dbx_symfile_info));
+
+ DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, text_name);
+ if (!DBX_TEXT_SECT (objfile))
+ error ("Can't find %s section in symbol file", text_name);
+
+ DBX_SYMBOL_SIZE (objfile) = sizeof (struct external_nlist);
+ DBX_SYMCOUNT (objfile) = bfd_section_size (sym_bfd, stabsect)
+ / DBX_SYMBOL_SIZE (objfile);
+ DBX_STRINGTAB_SIZE (objfile) = bfd_section_size (sym_bfd, stabstrsect);
+ DBX_SYMTAB_OFFSET (objfile) = stabsect->filepos; /* XXX - FIXME: POKING INSIDE BFD DATA STRUCTURES */
+
+ if (DBX_STRINGTAB_SIZE (objfile) > bfd_get_size (sym_bfd))
+ error ("ridiculous string table size: %d bytes", DBX_STRINGTAB_SIZE (objfile));
+ DBX_STRINGTAB (objfile) = (char *)
+ obstack_alloc (&objfile->psymbol_obstack, DBX_STRINGTAB_SIZE (objfile) + 1);
+
+ /* Now read in the string table in one big gulp. */
+
+ val = bfd_get_section_contents (sym_bfd, /* bfd */
+ stabstrsect, /* bfd section */
+ DBX_STRINGTAB (objfile), /* input buffer */
+ 0, /* offset into section */
+ DBX_STRINGTAB_SIZE (objfile)); /* amount to read */
+
+ if (!val)
+ perror_with_name (name);
+
+ stabsread_new_init ();
+ buildsym_new_init ();
free_header_files ();
init_header_files ();
+ install_minimal_symbols (objfile);
- /* In a PA file, we've already installed the minimal symbols that came
- from the PA (non-stab) symbol table, so always act like an
- incremental load here. */
+ /* Now, do an incremental load */
- dbx_symfile_read (objfile, section_offsets, mainline);
+ processing_acc_compilation = 1;
+ dbx_symfile_read (objfile, section_offsets, 0);
}
\f
/* Parse the user's idea of an offset for dynamic linking, into our idea
{
struct section_offsets *section_offsets;
int i;
-
+
+ objfile->num_sections = SECT_OFF_MAX;
section_offsets = (struct section_offsets *)
obstack_alloc (&objfile -> psymbol_obstack,
- sizeof (struct section_offsets) +
- sizeof (section_offsets->offsets) * (SECT_OFF_MAX-1));
+ sizeof (struct section_offsets)
+ + sizeof (section_offsets->offsets) * (SECT_OFF_MAX-1));
for (i = 0; i < SECT_OFF_MAX; i++)
ANOFFSET (section_offsets, i) = addr;
return section_offsets;
}
\f
-/* Register our willingness to decode symbols for SunOS and a.out and
- NetBSD and b.out files handled by BFD... */
-static struct sym_fns sunos_sym_fns =
-{
- "sunOs", /* sym_name: name or name prefix of BFD target type */
- 6, /* sym_namelen: number of significant sym_name chars */
- dbx_new_init, /* sym_new_init: init anything gbl to entire symtab */
- dbx_symfile_init, /* sym_init: read initial info, setup for sym_read() */
- dbx_symfile_read, /* sym_read: read a symbol file into symtab */
- dbx_symfile_finish, /* sym_finish: finished with file, cleanup */
- dbx_symfile_offsets, /* sym_offsets: parse user's offsets to internal form */
- NULL /* next: pointer to next struct sym_fns */
-};
-
static struct sym_fns aout_sym_fns =
{
- "a.out", /* sym_name: name or name prefix of BFD target type */
- 5, /* sym_namelen: number of significant sym_name chars */
- dbx_new_init, /* sym_new_init: init anything gbl to entire symtab */
- dbx_symfile_init, /* sym_init: read initial info, setup for sym_read() */
- dbx_symfile_read, /* sym_read: read a symbol file into symtab */
- dbx_symfile_finish, /* sym_finish: finished with file, cleanup */
- dbx_symfile_offsets, /* sym_offsets: parse user's offsets to internal form */
- NULL /* next: pointer to next struct sym_fns */
-};
-
-static struct sym_fns netbsd386_sym_fns =
-{
- "netbsd-386", /* sym_name: name or name prefix of BFD target type */
- 10, /* sym_namelen: number of significant sym_name chars */
- dbx_new_init, /* sym_new_init: init anything gbl to entire symtab */
- dbx_symfile_init, /* sym_init: read initial info, setup for sym_read() */
- dbx_symfile_read, /* sym_read: read a symbol file into symtab */
- dbx_symfile_finish, /* sym_finish: finished with file, cleanup */
- dbx_symfile_offsets, /* sym_offsets: parse user's offsets to internal form */
- NULL /* next: pointer to next struct sym_fns */
-};
-
-static struct sym_fns bout_sym_fns =
-{
- "b.out", /* sym_name: name or name prefix of BFD target type */
- 5, /* sym_namelen: number of significant sym_name chars */
+ bfd_target_aout_flavour,
dbx_new_init, /* sym_new_init: init anything gbl to entire symtab */
dbx_symfile_init, /* sym_init: read initial info, setup for sym_read() */
dbx_symfile_read, /* sym_read: read a symbol file into symtab */
void
_initialize_dbxread ()
{
- add_symtab_fns(&sunos_sym_fns);
add_symtab_fns(&aout_sym_fns);
- add_symtab_fns(&netbsd386_sym_fns);
- add_symtab_fns(&bout_sym_fns);
}