/* Read dbx symbol tables and convert to internal format, for GDB.
- Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
+ Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
/* This module provides three functions: dbx_symfile_init,
which initializes to read a symbol file; dbx_new_init, which
for real. dbx_psymtab_to_symtab() is the function that does this */
#include "defs.h"
-#include <string.h>
+#include "gdb_string.h"
#if defined(USG) || defined(__CYGNUSCLIB__)
#include <sys/types.h>
#include <fcntl.h>
#endif
-#include <obstack.h>
-#include <sys/param.h>
-#ifndef NO_SYS_FILE
-#include <sys/file.h>
-#endif
-#include <sys/stat.h>
+#include "obstack.h"
+#include "gdb_stat.h"
#include <ctype.h>
#include "symtab.h"
#include "breakpoint.h"
#include "aout/aout64.h"
#include "aout/stab_gnu.h" /* We always use GNU stabs, not native, now */
-#if !defined (SEEK_SET)
-#define SEEK_SET 0
-#define SEEK_CUR 1
-#endif
+\f
+/* We put a pointer to this structure in the read_symtab_private field
+ of the psymtab. */
-/* Each partial symbol table entry contains a pointer to private data for the
- read_symtab() function to use when expanding a partial symbol table entry
- to a full symbol table entry.
+struct symloc {
- For dbxread this structure contains the offset within the file symbol table
- of first local symbol for this file, and length (in bytes) of the section
- of the symbol table devoted to this file's symbols (actually, the section
- bracketed may contain more than just this file's symbols). It also contains
- further information needed to locate the symbols if they are in an ELF file.
+ /* Offset within the file symbol table of first local symbol for this
+ file. */
- If ldsymlen is 0, the only reason for this thing's existence is the
- dependency list. Nothing else will happen when it is read in. */
+ int ldsymoff;
-#define LDSYMOFF(p) (((struct symloc *)((p)->read_symtab_private))->ldsymoff)
-#define LDSYMLEN(p) (((struct symloc *)((p)->read_symtab_private))->ldsymlen)
-#define SYMLOC(p) ((struct symloc *)((p)->read_symtab_private))
-#define SYMBOL_SIZE(p) (SYMLOC(p)->symbol_size)
-#define SYMBOL_OFFSET(p) (SYMLOC(p)->symbol_offset)
-#define STRING_OFFSET(p) (SYMLOC(p)->string_offset)
-#define FILE_STRING_OFFSET(p) (SYMLOC(p)->file_string_offset)
+ /* Length (in bytes) of the section of the symbol table devoted to
+ this file's symbols (actually, the section bracketed may contain
+ more than just this file's symbols). If ldsymlen is 0, the only
+ reason for this thing's existence is the dependency list. Nothing
+ else will happen when it is read in. */
-struct symloc {
- int ldsymoff;
int ldsymlen;
+
+ /* The size of each symbol in the symbol file (in external form). */
+
int symbol_size;
+
+ /* Further information needed to locate the symbols if they are in
+ an ELF file. */
+
int symbol_offset;
int string_offset;
int file_string_offset;
};
+#define LDSYMOFF(p) (((struct symloc *)((p)->read_symtab_private))->ldsymoff)
+#define LDSYMLEN(p) (((struct symloc *)((p)->read_symtab_private))->ldsymlen)
+#define SYMLOC(p) ((struct symloc *)((p)->read_symtab_private))
+#define SYMBOL_SIZE(p) (SYMLOC(p)->symbol_size)
+#define SYMBOL_OFFSET(p) (SYMLOC(p)->symbol_offset)
+#define STRING_OFFSET(p) (SYMLOC(p)->string_offset)
+#define FILE_STRING_OFFSET(p) (SYMLOC(p)->file_string_offset)
+
+\f
/* Macro to determine which symbols to ignore when reading the first symbol
of a file. Some machines override this definition. */
#ifndef IGNORE_SYMBOL
static int block_address_function_relative = 0;
\f
-/* This is the lowest text address we have yet encountered. */
+/* The lowest text address we have yet encountered. This is needed
+ because in an a.out file, there is no header field which tells us
+ what address the program is actually going to be loaded at, so we
+ need to make guesses based on the symbols (which *are* relocated to
+ reflect the address it will be loaded at). */
static CORE_ADDR lowest_text_address;
/* Complaints about the symbols we have encountered. */
/* Local function prototypes */
+static void
+process_now PARAMS ((struct objfile *));
+
static void
free_header_files PARAMS ((void));
static void
init_bincl_list PARAMS ((int, struct objfile *));
-static void
-init_psymbol_list PARAMS ((struct objfile *));
-
static char *
-dbx_next_symbol_text PARAMS ((void));
+dbx_next_symbol_text PARAMS ((struct objfile *));
static void
fill_symbuf PARAMS ((bfd *));
static void
free_header_files ()
{
- register int i;
-
- if (header_files != NULL)
- {
- for (i = 0; i < n_header_files; i++)
- {
- free (header_files[i].name);
- }
- free ((PTR)header_files);
- header_files = NULL;
- n_header_files = 0;
- }
if (this_object_header_files)
{
free ((PTR)this_object_header_files);
this_object_header_files = NULL;
}
- n_allocated_header_files = 0;
n_allocated_this_object_header_files = 0;
}
static void
init_header_files ()
{
- n_header_files = 0;
- n_allocated_header_files = 10;
- header_files = (struct header_file *)
- xmalloc (10 * sizeof (struct header_file));
-
n_allocated_this_object_header_files = 10;
this_object_header_files = (int *) xmalloc (10 * sizeof (int));
}
char *name;
int instance;
{
- register struct header_file *p = header_files;
+ register struct header_file *p = HEADER_FILES (current_objfile);
register int i;
- for (i = 0; i < n_header_files; i++)
+ for (i = 0; i < N_HEADER_FILES (current_objfile); i++)
if (STREQ (p[i].name, name) && instance == p[i].instance)
{
add_this_object_header_file (i);
int instance;
{
register int i;
+ register struct header_file *hfile;
/* Make sure there is room for one more header file. */
- if (n_header_files == n_allocated_header_files)
+ i = N_ALLOCATED_HEADER_FILES (current_objfile);
+
+ if (N_HEADER_FILES (current_objfile) == i)
{
- n_allocated_header_files *= 2;
- header_files = (struct header_file *)
- xrealloc ((char *) header_files,
- (n_allocated_header_files * sizeof (struct header_file)));
+ if (i == 0)
+ {
+ N_ALLOCATED_HEADER_FILES (current_objfile) = 10;
+ HEADER_FILES (current_objfile) = (struct header_file *)
+ xmalloc (10 * sizeof (struct header_file));
+ }
+ else
+ {
+ i *= 2;
+ N_ALLOCATED_HEADER_FILES (current_objfile) = i;
+ HEADER_FILES (current_objfile) = (struct header_file *)
+ xrealloc ((char *) HEADER_FILES (current_objfile),
+ (i * sizeof (struct header_file)));
+ }
}
/* Create an entry for this header file. */
- i = n_header_files++;
- header_files[i].name = savestring (name, strlen(name));
- header_files[i].instance = instance;
- header_files[i].length = 10;
- header_files[i].vector
+ i = N_HEADER_FILES (current_objfile)++;
+ hfile = HEADER_FILES (current_objfile) + i;
+ hfile->name = savestring (name, strlen(name));
+ hfile->instance = instance;
+ hfile->length = 10;
+ hfile->vector
= (struct type **) xmalloc (10 * sizeof (struct type *));
- memset (header_files[i].vector, 0, 10 * sizeof (struct type *));
+ memset (hfile->vector, 0, 10 * sizeof (struct type *));
add_this_object_header_file (i);
}
explicit_lookup_type (real_filenum, index)
int real_filenum, index;
{
- register struct header_file *f = &header_files[real_filenum];
+ register struct header_file *f = &HEADER_FILES (current_objfile)[real_filenum];
if (index >= f->length)
{
lowest_text_address = address;
prim_record_minimal_symbol_and_info
- (obsavestring (name, strlen (name), &objfile -> symbol_obstack),
- address,
- ms_type,
- NULL,
- section,
- objfile);
+ (name, address, ms_type, NULL, section, objfile);
}
\f
/* Scan and build partial symbols for a symbol file.
val = strlen (objfile->name);
+ sym_bfd = objfile->obfd;
+
/* .o and .nlm files are relocatables with text, data and bss segs based at
0. This flag disables special (Solaris stabs-in-elf only) fixups for
- symbols with a value of 0. XXX - This is a Krock. Solaris stabs-in-elf
- should be fixed to determine pst->textlow without using this text seg of
- 0 fixup crap. */
+ symbols with a value of 0. */
- if (strcmp (&objfile->name[val-2], ".o") == 0
- || strcmp (&objfile->name[val-4], ".nlm") == 0)
- symfile_relocatable = 1;
+ symfile_relocatable = bfd_get_file_flags (sym_bfd) & HAS_RELOC;
/* This is true for Solaris (and all other systems which put stabs
in sections, hopefully, since it would be silly to do things
differently from Solaris), and false for SunOS4 and other a.out
file formats. */
block_address_function_relative =
- ((0 == strncmp (bfd_get_target (objfile->obfd), "elf", 3))
- || (0 == strncmp (bfd_get_target (objfile->obfd), "som", 3))
- || (0 == strncmp (bfd_get_target (objfile->obfd), "coff", 4))
- || (0 == strncmp (bfd_get_target (objfile->obfd), "nlm", 3)));
+ ((0 == strncmp (bfd_get_target (sym_bfd), "elf", 3))
+ || (0 == strncmp (bfd_get_target (sym_bfd), "som", 3))
+ || (0 == strncmp (bfd_get_target (sym_bfd), "coff", 4))
+ || (0 == strncmp (bfd_get_target (sym_bfd), "pe", 2))
+ || (0 == strncmp (bfd_get_target (sym_bfd), "nlm", 3)));
- sym_bfd = objfile->obfd;
- val = bfd_seek (objfile->obfd, DBX_SYMTAB_OFFSET (objfile), SEEK_SET);
+ val = bfd_seek (sym_bfd, DBX_SYMTAB_OFFSET (objfile), SEEK_SET);
if (val < 0)
perror_with_name (objfile->name);
/* If we are reinitializing, or if we have never loaded syms yet, init */
- if (mainline || objfile->global_psymbols.size == 0 || objfile->static_psymbols.size == 0)
- init_psymbol_list (objfile);
+ if (mainline
+ || objfile->global_psymbols.size == 0
+ || objfile->static_psymbols.size == 0)
+ init_psymbol_list (objfile, DBX_SYMCOUNT (objfile));
symbol_size = DBX_SYMBOL_SIZE (objfile);
symbol_table_offset = DBX_SYMTAB_OFFSET (objfile);
- pending_blocks = 0;
+ free_pending_blocks ();
back_to = make_cleanup (really_free_pendings, 0);
init_minimal_symbol_collection ();
process them and define symbols accordingly. */
read_dbx_symtab (section_offsets, objfile,
- bfd_section_vma (sym_bfd, DBX_TEXT_SECT (objfile)),
- bfd_section_size (sym_bfd, DBX_TEXT_SECT (objfile)));
+ DBX_TEXT_ADDR (objfile),
+ DBX_TEXT_SIZE (objfile));
/* Add the dynamic symbols. */
int val;
bfd *sym_bfd = objfile->obfd;
char *name = bfd_get_filename (sym_bfd);
+ asection *text_sect;
unsigned char size_temp[DBX_STRINGTAB_SIZE_SIZE];
/* Allocate struct to keep track of the symfile */
/* FIXME POKING INSIDE BFD DATA STRUCTURES */
DBX_SYMFILE_INFO (objfile)->stab_section_info = NULL;
- DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
- if (!DBX_TEXT_SECT (objfile))
+
+ text_sect = bfd_get_section_by_name (sym_bfd, ".text");
+ if (!text_sect)
error ("Can't find .text section in symbol file");
+ DBX_TEXT_ADDR (objfile) = bfd_section_vma (sym_bfd, text_sect);
+ DBX_TEXT_SIZE (objfile) = bfd_section_size (sym_bfd, text_sect);
DBX_SYMBOL_SIZE (objfile) = obj_symbol_entry_size (sym_bfd);
DBX_SYMCOUNT (objfile) = bfd_get_symcount (sym_bfd);
DBX_STRINGTAB (objfile) =
(char *) obstack_alloc (&objfile -> psymbol_obstack,
DBX_STRINGTAB_SIZE (objfile));
+ OBJSTAT (objfile, sz_strtab += DBX_STRINGTAB_SIZE (objfile));
/* Now read in the string table in one big gulp. */
{
if (objfile->sym_stab_info != NULL)
{
+ if (HEADER_FILES (objfile) != NULL)
+ {
+ register int i = N_HEADER_FILES (objfile);
+ register struct header_file *hfiles = HEADER_FILES (objfile);
+
+ while (--i >= 0)
+ {
+ free (hfiles [i].name);
+ }
+ free ((PTR) hfiles);
+ }
mfree (objfile -> md, objfile->sym_stab_info);
}
free_header_files ();
\f
/* Buffer for reading the symbol table entries. */
-static struct internal_nlist symbuf[4096];
+static struct external_nlist symbuf[4096];
static int symbuf_idx;
static int symbuf_end;
+/* cont_elem is used for continuing information in cfront.
+ It saves information about which types need to be fixed up and
+ completed after all the stabs are read. */
+struct cont_elem
+ {
+ /* sym and stabsstring for continuing information in cfront */
+ struct symbol * sym;
+ char * stabs;
+ /* state dependancies (statics that must be preserved) */
+ int sym_idx;
+ int sym_end;
+ int symnum;
+ /* other state dependancies include:
+ (assumption is that these will not change since process_now FIXME!!)
+ stringtab_global
+ n_stabs
+ objfile
+ symfile_bfd */
+};
+static struct cont_elem cont_list[100];
+static int cont_count = 0;
+
+void
+process_later(sym,p)
+ struct symbol * sym;
+ char * p;
+{
+ /* save state so we can process these stabs later */
+ cont_list[cont_count].sym_idx = symbuf_idx;
+ cont_list[cont_count].sym_end = symbuf_end;
+ cont_list[cont_count].symnum = symnum;
+ cont_list[cont_count].sym = sym;
+ cont_list[cont_count].stabs = p;
+ cont_count++;
+}
+
+static void
+process_now(objfile)
+ struct objfile * objfile;
+{
+ int i;
+ /* save original state */
+ int save_symbuf_idx = symbuf_idx;
+ int save_symbuf_end = symbuf_end;
+ int save_symnum = symnum;
+ for (i=0; i<cont_count; i++)
+ {
+ /* set state as if we were parsing stabs strings
+ for this symbol */
+ symbuf_idx = cont_list[i].sym_idx; /* statics used by gdb */
+ symbuf_end = cont_list[i].sym_end;
+ symnum = cont_list[i].symnum;
+ resolve_cfront_continuation(objfile,cont_list[i].sym,cont_list[i].stabs);
+ }
+ /* restore original state */
+ symbuf_idx = save_symbuf_idx;
+ symbuf_end = save_symbuf_end;
+ symnum = save_symnum;
+ cont_count=0; /* reset for next run */
+}
+
+
/* Name of last function encountered. Used in Solaris to approximate
object file boundaries. */
static char *last_function_name;
/* The address in memory of the string table of the object file we are
reading (which might not be the "main" object file, but might be a
- shared library or some other dynamically loaded thing). This is set
- by read_dbx_symtab when building psymtabs, and by read_ofile_symtab
- when building symtabs, and is used only by next_symbol_text. */
+ shared library or some other dynamically loaded thing). This is
+ set by read_dbx_symtab when building psymtabs, and by
+ read_ofile_symtab when building symtabs, and is used only by
+ next_symbol_text. FIXME: If that is true, we don't need it when
+ building psymtabs, right? */
static char *stringtab_global;
+/* These variables are used to control fill_symbuf when the stabs
+ symbols are not contiguous (as may be the case when a COFF file is
+ linked using --split-by-reloc). */
+static struct stab_section_list *symbuf_sections;
+static unsigned int symbuf_left;
+static unsigned int symbuf_read;
+
/* Refill the symbol table input buffer
and set the variables that control fetching entries from it.
Reports an error if no data available.
fill_symbuf (sym_bfd)
bfd *sym_bfd;
{
- int nbytes = bfd_read ((PTR)symbuf, sizeof (symbuf), 1, sym_bfd);
+ unsigned int count;
+ int nbytes;
+
+ if (symbuf_sections == NULL)
+ count = sizeof (symbuf);
+ else
+ {
+ if (symbuf_left <= 0)
+ {
+ file_ptr filepos = symbuf_sections->section->filepos;
+ if (bfd_seek (sym_bfd, filepos, SEEK_SET) != 0)
+ perror_with_name (bfd_get_filename (sym_bfd));
+ symbuf_left = bfd_section_size (sym_bfd, symbuf_sections->section);
+ symbol_table_offset = filepos - symbuf_read;
+ symbuf_sections = symbuf_sections->next;
+ }
+
+ count = symbuf_left;
+ if (count > sizeof (symbuf))
+ count = sizeof (symbuf);
+ }
+
+ nbytes = bfd_read ((PTR)symbuf, count, 1, sym_bfd);
if (nbytes < 0)
perror_with_name (bfd_get_filename (sym_bfd));
else if (nbytes == 0)
error ("Premature end of file reading symbol table");
symbuf_end = nbytes / symbol_size;
symbuf_idx = 0;
+ symbuf_left -= nbytes;
+ symbuf_read += nbytes;
}
#define SWAP_SYMBOL(symp, abfd) \
(unsigned char *)&(symp)->n_value); \
}
+#define INTERNALIZE_SYMBOL(intern, extern, abfd) \
+ { \
+ (intern).n_type = bfd_h_get_8 (abfd, (extern)->e_type); \
+ (intern).n_strx = bfd_h_get_32 (abfd, (extern)->e_strx); \
+ (intern).n_desc = bfd_h_get_16 (abfd, (extern)->e_desc); \
+ (intern).n_value = bfd_h_get_32 (abfd, (extern)->e_value); \
+ }
+
/* Invariant: The symbol pointed to by symbuf_idx is the first one
that hasn't been swapped. Swap the symbol at the same time
that symbuf_idx is incremented. */
call this function to get the continuation. */
static char *
-dbx_next_symbol_text ()
+dbx_next_symbol_text (objfile)
+ struct objfile *objfile;
{
+ struct internal_nlist nlist;
+
if (symbuf_idx == symbuf_end)
fill_symbuf (symfile_bfd);
+
symnum++;
- SWAP_SYMBOL(&symbuf[symbuf_idx], symfile_bfd);
- return symbuf[symbuf_idx++].n_strx + stringtab_global
- + file_string_table_offset;
-}
-\f
-/* Initializes storage for all of the partial symbols that will be
- created by read_dbx_symtab and subsidiaries. */
+ INTERNALIZE_SYMBOL(nlist, &symbuf[symbuf_idx], symfile_bfd);
+ OBJSTAT (objfile, n_stabs++);
-static void
-init_psymbol_list (objfile)
- struct objfile *objfile;
-{
- /* Free any previously allocated psymbol lists. */
- if (objfile -> global_psymbols.list)
- mfree (objfile -> md, (PTR)objfile -> global_psymbols.list);
- if (objfile -> static_psymbols.list)
- mfree (objfile -> md, (PTR)objfile -> static_psymbols.list);
-
- /* Current best guess is that there are approximately a twentieth
- of the total symbols (in a debugging file) are global or static
- oriented symbols */
- objfile -> global_psymbols.size = DBX_SYMCOUNT (objfile) / 10;
- objfile -> static_psymbols.size = DBX_SYMCOUNT (objfile) / 10;
- objfile -> global_psymbols.next = objfile -> global_psymbols.list = (struct partial_symbol *)
- xmmalloc (objfile -> md, objfile -> global_psymbols.size * sizeof (struct partial_symbol));
- objfile -> static_psymbols.next = objfile -> static_psymbols.list = (struct partial_symbol *)
- xmmalloc (objfile -> md, objfile -> static_psymbols.size * sizeof (struct partial_symbol));
-}
+ symbuf_idx++;
+ return nlist.n_strx + stringtab_global + file_string_table_offset;
+}
+\f
/* Initialize the list of bincls to contain none and have some
allocated. */
}
name = (char *) bfd_asymbol_name (*rel->sym_ptr_ptr);
- prim_record_minimal_symbol
- (obsavestring (name, strlen (name), &objfile -> symbol_obstack),
- address,
- mst_solib_trampoline,
- objfile);
+ prim_record_minimal_symbol (name, address, mst_solib_trampoline,
+ objfile);
}
do_cleanups (back_to);
CORE_ADDR text_addr;
int text_size;
{
- register struct internal_nlist *bufp = 0; /* =0 avoids gcc -Wall glitch */
+ register struct external_nlist *bufp = 0; /* =0 avoids gcc -Wall glitch */
+ struct internal_nlist nlist;
+
register char *namestring;
int nsl;
int past_first_source_file = 0;
CORE_ADDR last_o_file_start = 0;
+ CORE_ADDR last_function_start = 0;
struct cleanup *back_to;
bfd *abfd;
+ int textlow_not_set;
/* Current partial symtab */
struct partial_symtab *pst;
abfd = objfile->obfd;
symbuf_end = symbuf_idx = 0;
next_symbol_text_func = dbx_next_symbol_text;
+ textlow_not_set = 1;
for (symnum = 0; symnum < DBX_SYMCOUNT (objfile); symnum++)
{
/*
* Special case to speed up readin.
*/
- if (bufp->n_type == (unsigned char)N_SLINE) continue;
+ if (bfd_h_get_8 (abfd, bufp->e_type) == N_SLINE)
+ continue;
- SWAP_SYMBOL (bufp, abfd);
+ INTERNALIZE_SYMBOL (nlist, bufp, abfd);
+ OBJSTAT (objfile, n_stabs++);
/* Ok. There is a lot of code duplicated in the rest of this
switch statement (for efficiency reasons). Since I don't
I've imbedded it in the following macro.
*/
-/* Set namestring based on bufp. If the string table index is invalid,
+/* Set namestring based on nlist. If the string table index is invalid,
give a fake name, and print a single error message per symbol file read,
rather than abort the symbol reading or flood the user with messages. */
/*FIXME: Too many adds and indirections in here for the inner loop. */
#define SET_NAMESTRING()\
- if (((unsigned)bufp->n_strx + file_string_table_offset) >= \
+ if (((unsigned)CUR_SYMBOL_STRX + file_string_table_offset) >= \
DBX_STRINGTAB_SIZE (objfile)) { \
complain (&string_table_offset_complaint, symnum); \
namestring = "<bad string table offset>"; \
} else \
- namestring = bufp->n_strx + file_string_table_offset + \
+ namestring = CUR_SYMBOL_STRX + file_string_table_offset + \
DBX_STRINGTAB (objfile)
-#define CUR_SYMBOL_TYPE bufp->n_type
-#define CUR_SYMBOL_VALUE bufp->n_value
+#define CUR_SYMBOL_TYPE nlist.n_type
+#define CUR_SYMBOL_VALUE nlist.n_value
+#define CUR_SYMBOL_STRX nlist.n_strx
#define DBXREAD_ONLY
#define START_PSYMTAB(ofile,secoff,fname,low,symoff,global_syms,static_syms)\
start_psymtab(ofile, secoff, fname, low, symoff, global_syms, static_syms)
-#define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps)\
- end_psymtab(pst,ilist,ninc,c_off,c_text,dep_list,n_deps)
+#define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps,textlow_not_set)\
+ end_psymtab(pst,ilist,ninc,c_off,c_text,dep_list,n_deps,textlow_not_set)
#include "partial-stab.h"
}
if (DBX_SYMCOUNT (objfile) > 0 /* We have some syms */
/*FIXME, does this have a bug at start address 0? */
&& last_o_file_start
- && objfile -> ei.entry_point < bufp->n_value
+ && objfile -> ei.entry_point < nlist.n_value
&& objfile -> ei.entry_point >= last_o_file_start)
{
objfile -> ei.entry_file_lowpc = last_o_file_start;
- objfile -> ei.entry_file_highpc = bufp->n_value;
+ objfile -> ei.entry_file_highpc = nlist.n_value;
}
if (pst)
? (text_addr + section_offsets->offsets[SECT_OFF_TEXT])
: lowest_text_address)
+ text_size,
- dependency_list, dependencies_used);
+ dependency_list, dependencies_used, textlow_not_set);
}
do_cleanups (back_to);
char *filename;
CORE_ADDR textlow;
int ldsymoff;
- struct partial_symbol *global_syms;
- struct partial_symbol *static_syms;
+ struct partial_symbol **global_syms;
+ struct partial_symbol **static_syms;
{
struct partial_symtab *result =
start_psymtab_common(objfile, section_offsets,
struct partial_symtab *
end_psymtab (pst, include_list, num_includes, capping_symbol_offset,
- capping_text, dependency_list, number_dependencies)
+ capping_text, dependency_list, number_dependencies, textlow_not_set)
struct partial_symtab *pst;
char **include_list;
int num_includes;
CORE_ADDR capping_text;
struct partial_symtab **dependency_list;
int number_dependencies;
+ int textlow_not_set;
{
int i;
struct objfile *objfile = pst -> objfile;
if (capping_symbol_offset != -1)
- LDSYMLEN(pst) = capping_symbol_offset - LDSYMOFF(pst);
+ LDSYMLEN(pst) = capping_symbol_offset - LDSYMOFF(pst);
pst->texthigh = capping_text;
#ifdef SOFUN_ADDRESS_MAYBE_MISSING
we have to do some tricks to fill in texthigh and textlow.
The first trick is in partial-stab.h: if we see a static
or global function, and the textlow for the current pst
- is still 0, then we use that function's address for
- the textlow of the pst. */
+ is not set (ie: textlow_not_set), then we use that function's
+ address for the textlow of the pst. */
/* Now, to fill in texthigh, we remember the last function seen
in the .o file (also in partial-stab.h). Also, there's a hack in
a reliable texthigh by taking the address plus size of the
last function in the file. */
- if (pst->texthigh == 0 && last_function_name) {
- char *p;
- int n;
- struct minimal_symbol *minsym;
-
- p = strchr (last_function_name, ':');
- if (p == NULL)
- p = last_function_name;
- n = p - last_function_name;
- p = alloca (n + 1);
- strncpy (p, last_function_name, n);
- p[n] = 0;
+ if (pst->texthigh == 0 && last_function_name)
+ {
+ char *p;
+ int n;
+ struct minimal_symbol *minsym;
+
+ p = strchr (last_function_name, ':');
+ if (p == NULL)
+ p = last_function_name;
+ n = p - last_function_name;
+ p = alloca (n + 1);
+ strncpy (p, last_function_name, n);
+ p[n] = 0;
- minsym = lookup_minimal_symbol (p, pst->filename, objfile);
+ minsym = lookup_minimal_symbol (p, pst->filename, objfile);
- if (minsym)
- pst->texthigh = SYMBOL_VALUE_ADDRESS (minsym) +
- (long) MSYMBOL_INFO (minsym);
+ if (minsym)
+ pst->texthigh = SYMBOL_VALUE_ADDRESS (minsym)
+ + (long) MSYMBOL_INFO (minsym);
- last_function_name = NULL;
- }
+ last_function_name = NULL;
+ }
/* this test will be true if the last .o file is only data */
- if (pst->textlow == 0)
- /* This loses if the text section really starts at address zero
- (generally true when we are debugging a .o file, for example).
- That is why this whole thing is inside SOFUN_ADDRESS_MAYBE_MISSING. */
+ if (textlow_not_set)
pst->textlow = pst->texthigh;
+ else
+ {
+ struct partial_symtab *p1;
- /* If we know our own starting text address, then walk through all other
- psymtabs for this objfile, and if any didn't know their ending text
- address, set it to our starting address. Take care to not set our
- own ending address to our starting address, nor to set addresses on
- `dependency' files that have both textlow and texthigh zero. */
- if (pst->textlow) {
- struct partial_symtab *p1;
-
- ALL_OBJFILE_PSYMTABS (objfile, p1) {
- if (p1->texthigh == 0 && p1->textlow != 0 && p1 != pst) {
- p1->texthigh = pst->textlow;
- /* if this file has only data, then make textlow match texthigh */
- if (p1->textlow == 0)
- p1->textlow = p1->texthigh;
- }
+ /* If we know our own starting text address, then walk through all other
+ psymtabs for this objfile, and if any didn't know their ending text
+ address, set it to our starting address. Take care to not set our
+ own ending address to our starting address, nor to set addresses on
+ `dependency' files that have both textlow and texthigh zero. */
+
+ ALL_OBJFILE_PSYMTABS (objfile, p1)
+ {
+ if (p1->texthigh == 0 && p1->textlow != 0 && p1 != pst)
+ {
+ p1->texthigh = pst->textlow;
+ /* if this file has only data, then make textlow match texthigh */
+ if (p1->textlow == 0)
+ p1->textlow = p1->texthigh;
+ }
+ }
}
- }
/* End of kludge for patching Solaris textlow and texthigh. */
#endif /* SOFUN_ADDRESS_MAYBE_MISSING. */
struct partial_symtab *pst;
{
register char *namestring;
- register struct internal_nlist *bufp;
+ register struct external_nlist *bufp;
+ struct internal_nlist nlist;
unsigned char type;
unsigned max_symnum;
register bfd *abfd;
bfd_seek (symfile_bfd, sym_offset - symbol_size, SEEK_CUR);
fill_symbuf (abfd);
bufp = &symbuf[symbuf_idx++];
- SWAP_SYMBOL (bufp, abfd);
+ INTERNALIZE_SYMBOL (nlist, bufp, abfd);
+ OBJSTAT (objfile, n_stabs++);
SET_NAMESTRING ();
processing_gcc_compilation = 0;
- if (bufp->n_type == N_TEXT)
+ if (nlist.n_type == N_TEXT)
{
const char *tempstring = namestring;
if (symbuf_idx == symbuf_end)
fill_symbuf (abfd);
bufp = &symbuf[symbuf_idx];
- if (bufp->n_type != (unsigned char)N_SO)
+ if (bfd_h_get_8 (abfd, bufp->e_type) != N_SO)
error("First symbol in segment of executable not a source symbol");
max_symnum = sym_size / symbol_size;
if (symbuf_idx == symbuf_end)
fill_symbuf(abfd);
bufp = &symbuf[symbuf_idx++];
- SWAP_SYMBOL (bufp, abfd);
+ INTERNALIZE_SYMBOL (nlist, bufp, abfd);
+ OBJSTAT (objfile, n_stabs++);
- type = bufp->n_type;
+ type = bfd_h_get_8 (abfd, bufp->e_type);
SET_NAMESTRING ();
if (type & N_STAB) {
- process_one_symbol (type, bufp->n_desc, bufp->n_value,
+ process_one_symbol (type, nlist.n_desc, nlist.n_value,
namestring, section_offsets, objfile);
}
/* We skip checking for a new .o or -l file; that should never
if (last_source_start_addr == 0)
last_source_start_addr = text_offset;
- pst->symtab = end_symtab (text_offset + text_size, 0, 0, objfile,
- SECT_OFF_TEXT);
+ /* In reordered executables last_source_start_addr may not be the
+ lower bound for this symtab, instead use text_offset which comes
+ from pst->textlow which is correct. */
+ if (last_source_start_addr > text_offset)
+ last_source_start_addr = text_offset;
+
+ pst->symtab = end_symtab (text_offset + text_size, objfile, SECT_OFF_TEXT);
+
+ if (ARM_DEMANGLING) /* process incomplete C++ types now */
+ process_now(objfile);
+
end_stabs ();
}
{
case N_FUN:
case N_FNAME:
+
+ if (*name == '\000')
+ {
+ /* This N_FUN marks the end of a function. This closes off the
+ current block. */
+ within_function = 0;
+ new = pop_context ();
+
+ /* Make a block for the local symbols within. */
+ finish_block (new->name, &local_symbols, new->old_blocks,
+ function_start_offset, function_start_offset + valu,
+ objfile);
+ break;
+ }
+
/* Relocate for dynamic loading */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
goto define_a_symbol;
patch_subfile_names (current_subfile, name);
break; /* Ignore repeated SOs */
}
- end_symtab (valu, 0, 0, objfile, SECT_OFF_TEXT);
+ end_symtab (valu, objfile, SECT_OFF_TEXT);
end_stabs ();
}
#ifdef SOFUN_ADDRESS_MAYBE_MISSING
/* Deal with the SunPRO 3.0 compiler which omits the address
from N_FUN symbols. */
- if (type == N_FUN && valu == 0)
+ if (type == N_FUN
+ && valu == ANOFFSET (section_offsets, SECT_OFF_TEXT))
{
struct minimal_symbol *msym;
char *p;
int l = colon_pos - name;
m = lookup_minimal_symbol_by_pc (last_pc_address);
- if (m && STREQN (SYMBOL_NAME (m), name, l))
+ if (m && STREQN (SYMBOL_NAME (m), name, l)
+ && SYMBOL_NAME (m) [l] == '\0')
/* last_pc_address was in this function */
valu = SYMBOL_VALUE (m);
- else if (m && STREQN (SYMBOL_NAME (m+1), name, l))
+ else if (m && SYMBOL_NAME (m+1)
+ && STREQN (SYMBOL_NAME (m+1), name, l)
+ && SYMBOL_NAME (m+1) [l] == '\0')
/* last_pc_address was in last function */
valu = SYMBOL_VALUE (m+1);
else
previous_stab_code = type;
}
\f
-/* FIXME: The only difference between this and elfstab_build_psymtabs is
- the call to install_minimal_symbols for elf. If the differences are
- really that small, the code should be shared. */
+/* FIXME: The only difference between this and elfstab_build_psymtabs
+ is the call to install_minimal_symbols for elf, and the support for
+ split sections. If the differences are really that small, the code
+ should be shared. */
/* Scan and build partial symbols for an coff symbol file.
The coff file has already been processed to get its minimal symbols.
the base address of the text segment).
MAINLINE is true if we are reading the main symbol
table (as opposed to a shared lib or dynamically loaded file).
- STABOFFSET and STABSIZE define the location in OBJFILE where the .stab
- section exists.
+ TEXTADDR is the address of the text section.
+ TEXTSIZE is the size of the text section.
+ STABSECTS is the list of .stab sections in OBJFILE.
STABSTROFFSET and STABSTRSIZE define the location in OBJFILE where the
.stabstr section exists.
void
coffstab_build_psymtabs (objfile, section_offsets, mainline,
- staboffset, stabsize,
+ textaddr, textsize, stabsects,
stabstroffset, stabstrsize)
struct objfile *objfile;
struct section_offsets *section_offsets;
int mainline;
- file_ptr staboffset;
- unsigned int stabsize;
+ CORE_ADDR textaddr;
+ unsigned int textsize;
+ struct stab_section_list *stabsects;
file_ptr stabstroffset;
unsigned int stabstrsize;
{
bfd *sym_bfd = objfile->obfd;
char *name = bfd_get_filename (sym_bfd);
struct dbx_symfile_info *info;
+ unsigned int stabsize;
/* There is already a dbx_symfile_info allocated by our caller.
It might even contain some info from the coff symtab to help us. */
info = (struct dbx_symfile_info *) objfile->sym_stab_info;
- DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
- if (!DBX_TEXT_SECT (objfile))
- error ("Can't find .text section in symbol file");
+ DBX_TEXT_ADDR (objfile) = textaddr;
+ DBX_TEXT_SIZE (objfile) = textsize;
#define COFF_STABS_SYMBOL_SIZE 12 /* XXX FIXME XXX */
DBX_SYMBOL_SIZE (objfile) = COFF_STABS_SYMBOL_SIZE;
- DBX_SYMCOUNT (objfile) = stabsize / DBX_SYMBOL_SIZE (objfile);
DBX_STRINGTAB_SIZE (objfile) = stabstrsize;
- DBX_SYMTAB_OFFSET (objfile) = staboffset;
if (stabstrsize > bfd_get_size (sym_bfd))
error ("ridiculous string table size: %d bytes", stabstrsize);
DBX_STRINGTAB (objfile) = (char *)
obstack_alloc (&objfile->psymbol_obstack, stabstrsize+1);
+ OBJSTAT (objfile, sz_strtab += stabstrsize+1);
/* Now read in the string table in one big gulp. */
/* In a coff file, we've already installed the minimal symbols that came
from the coff (non-stab) symbol table, so always act like an
incremental load here. */
+ if (stabsects->next == NULL)
+ {
+ stabsize = bfd_section_size (sym_bfd, stabsects->section);
+ DBX_SYMCOUNT (objfile) = stabsize / DBX_SYMBOL_SIZE (objfile);
+ DBX_SYMTAB_OFFSET (objfile) = stabsects->section->filepos;
+ }
+ else
+ {
+ struct stab_section_list *stabsect;
+
+ DBX_SYMCOUNT (objfile) = 0;
+ for (stabsect = stabsects; stabsect != NULL; stabsect = stabsect->next)
+ {
+ stabsize = bfd_section_size (sym_bfd, stabsect->section);
+ DBX_SYMCOUNT (objfile) += stabsize / DBX_SYMBOL_SIZE (objfile);
+ }
+
+ DBX_SYMTAB_OFFSET (objfile) = stabsects->section->filepos;
+
+ symbuf_sections = stabsects->next;
+ symbuf_left = bfd_section_size (sym_bfd, stabsects->section);
+ symbuf_read = 0;
+ }
+
dbx_symfile_read (objfile, section_offsets, 0);
}
\f
bfd *sym_bfd = objfile->obfd;
char *name = bfd_get_filename (sym_bfd);
struct dbx_symfile_info *info;
+ asection *text_sect;
/* There is already a dbx_symfile_info allocated by our caller.
It might even contain some info from the ELF symtab to help us. */
info = (struct dbx_symfile_info *) objfile->sym_stab_info;
- DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
- if (!DBX_TEXT_SECT (objfile))
+ text_sect = bfd_get_section_by_name (sym_bfd, ".text");
+ if (!text_sect)
error ("Can't find .text section in symbol file");
+ DBX_TEXT_ADDR (objfile) = bfd_section_vma (sym_bfd, text_sect);
+ DBX_TEXT_SIZE (objfile) = bfd_section_size (sym_bfd, text_sect);
#define ELF_STABS_SYMBOL_SIZE 12 /* XXX FIXME XXX */
DBX_SYMBOL_SIZE (objfile) = ELF_STABS_SYMBOL_SIZE;
error ("ridiculous string table size: %d bytes", stabstrsize);
DBX_STRINGTAB (objfile) = (char *)
obstack_alloc (&objfile->psymbol_obstack, stabstrsize+1);
+ OBJSTAT (objfile, sz_strtab += stabstrsize+1);
/* Now read in the string table in one big gulp. */
char *name = bfd_get_filename (sym_bfd);
asection *stabsect;
asection *stabstrsect;
+ asection *text_sect;
stabsect = bfd_get_section_by_name (sym_bfd, stab_name);
stabstrsect = bfd_get_section_by_name (sym_bfd, stabstr_name);
objfile->sym_stab_info = (PTR) xmalloc (sizeof (struct dbx_symfile_info));
memset (DBX_SYMFILE_INFO (objfile), 0, sizeof (struct dbx_symfile_info));
- DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, text_name);
- if (!DBX_TEXT_SECT (objfile))
+ text_sect = bfd_get_section_by_name (sym_bfd, text_name);
+ if (!text_sect)
error ("Can't find %s section in symbol file", text_name);
+ DBX_TEXT_ADDR (objfile) = bfd_section_vma (sym_bfd, text_sect);
+ DBX_TEXT_SIZE (objfile) = bfd_section_size (sym_bfd, text_sect);
DBX_SYMBOL_SIZE (objfile) = sizeof (struct external_nlist);
DBX_SYMCOUNT (objfile) = bfd_section_size (sym_bfd, stabsect)
error ("ridiculous string table size: %d bytes", DBX_STRINGTAB_SIZE (objfile));
DBX_STRINGTAB (objfile) = (char *)
obstack_alloc (&objfile->psymbol_obstack, DBX_STRINGTAB_SIZE (objfile) + 1);
+ OBJSTAT (objfile, sz_strtab += DBX_STRINGTAB_SIZE (objfile) + 1);
/* Now read in the string table in one big gulp. */
dbx_symfile_read (objfile, section_offsets, 0);
}
\f
-/* Parse the user's idea of an offset for dynamic linking, into our idea
- of how to represent it for fast symbol reading. */
-
-static struct section_offsets *
-dbx_symfile_offsets (objfile, addr)
- struct objfile *objfile;
- CORE_ADDR addr;
-{
- struct section_offsets *section_offsets;
- int i;
-
- objfile->num_sections = SECT_OFF_MAX;
- section_offsets = (struct section_offsets *)
- obstack_alloc (&objfile -> psymbol_obstack,
- sizeof (struct section_offsets)
- + sizeof (section_offsets->offsets) * (SECT_OFF_MAX-1));
-
- for (i = 0; i < SECT_OFF_MAX; i++)
- ANOFFSET (section_offsets, i) = addr;
-
- return section_offsets;
-}
-\f
static struct sym_fns aout_sym_fns =
{
bfd_target_aout_flavour,
dbx_symfile_init, /* sym_init: read initial info, setup for sym_read() */
dbx_symfile_read, /* sym_read: read a symbol file into symtab */
dbx_symfile_finish, /* sym_finish: finished with file, cleanup */
- dbx_symfile_offsets, /* sym_offsets: parse user's offsets to internal form */
+ default_symfile_offsets,
+ /* sym_offsets: parse user's offsets to internal form */
NULL /* next: pointer to next struct sym_fns */
};
projects / deliverable / binutils-gdb.git / blobdiff