{
case N_TEXT | N_EXT:
ms_type = mst_text;
- section = SECT_OFF_TEXT;
+ section = SECT_OFF_TEXT (objfile);
bfd_section = DBX_TEXT_SECTION (objfile);
break;
case N_DATA | N_EXT:
ms_type = mst_data;
- section = SECT_OFF_DATA;
+ section = SECT_OFF_DATA (objfile);
bfd_section = DBX_DATA_SECTION (objfile);
break;
case N_BSS | N_EXT:
ms_type = mst_bss;
- section = SECT_OFF_BSS;
+ section = SECT_OFF_BSS (objfile);
bfd_section = DBX_BSS_SECTION (objfile);
break;
case N_ABS | N_EXT:
#ifdef N_SETV
case N_SETV | N_EXT:
ms_type = mst_data;
- section = SECT_OFF_DATA;
+ section = SECT_OFF_DATA (objfile);
bfd_section = DBX_DATA_SECTION (objfile);
break;
case N_SETV:
of going over many .o files, it doesn't make sense to have one
file local. */
ms_type = mst_file_data;
- section = SECT_OFF_DATA;
+ section = SECT_OFF_DATA (objfile);
bfd_section = DBX_DATA_SECTION (objfile);
break;
#endif
case N_FN:
case N_FN_SEQ:
ms_type = mst_file_text;
- section = SECT_OFF_TEXT;
+ section = SECT_OFF_TEXT (objfile);
bfd_section = DBX_TEXT_SECTION (objfile);
break;
case N_DATA:
if (VTBL_PREFIX_P ((tempstring)))
ms_type = mst_data;
}
- section = SECT_OFF_DATA;
+ section = SECT_OFF_DATA (objfile);
bfd_section = DBX_DATA_SECTION (objfile);
break;
case N_BSS:
ms_type = mst_file_bss;
- section = SECT_OFF_BSS;
+ section = SECT_OFF_BSS (objfile);
bfd_section = DBX_BSS_SECTION (objfile);
break;
default:
|| (0 == strncmp (bfd_get_target (sym_bfd), "som", 3))
|| (0 == strncmp (bfd_get_target (sym_bfd), "coff", 4))
|| (0 == strncmp (bfd_get_target (sym_bfd), "pe", 2))
+ || (0 == strncmp (bfd_get_target (sym_bfd), "epoc-pe", 7))
|| (0 == strncmp (bfd_get_target (sym_bfd), "nlm", 3)));
val = bfd_seek (sym_bfd, DBX_SYMTAB_OFFSET (objfile), SEEK_SET);
back_to = make_cleanup (really_free_pendings, 0);
init_minimal_symbol_collection ();
- make_cleanup ((make_cleanup_func) discard_minimal_symbols, 0);
+ make_cleanup_discard_minimal_symbols ();
/* Read stabs data from executable file and define symbols. */
bincls_allocated = 0;
}
+static void
+do_free_bincl_list_cleanup (void *objfile)
+{
+ free_bincl_list (objfile);
+}
+
+static struct cleanup *
+make_cleanup_free_bincl_list (struct objfile *objfile)
+{
+ return make_cleanup (do_free_bincl_list_cleanup, objfile);
+}
+
/* Scan a SunOs dynamic symbol table for symbols of interest and
add them to the minimal symbol table. */
if (bfd_get_section_flags (abfd, sec) & SEC_CODE)
{
- sym_value += ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT);
+ sym_value += ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile));
type = N_TEXT;
}
else if (bfd_get_section_flags (abfd, sec) & SEC_DATA)
{
- sym_value += ANOFFSET (objfile->section_offsets, SECT_OFF_DATA);
+ sym_value += ANOFFSET (objfile->section_offsets, SECT_OFF_DATA (objfile));
type = N_DATA;
}
else if (bfd_get_section_flags (abfd, sec) & SEC_ALLOC)
{
- sym_value += ANOFFSET (objfile->section_offsets, SECT_OFF_BSS);
+ sym_value += ANOFFSET (objfile->section_offsets, SECT_OFF_BSS (objfile));
type = N_BSS;
}
else
{
arelent *rel = *relptr;
CORE_ADDR address =
- rel->address + ANOFFSET (objfile->section_offsets, SECT_OFF_DATA);
+ rel->address + ANOFFSET (objfile->section_offsets, SECT_OFF_DATA (objfile));
switch (bfd_get_arch (abfd))
{
/* Init bincl list */
init_bincl_list (20, objfile);
- back_to = make_cleanup ((make_cleanup_func) free_bincl_list, objfile);
+ back_to = make_cleanup_free_bincl_list (objfile);
last_source_file = NULL;
/* Don't set pst->texthigh lower than it already is. */
CORE_ADDR text_end =
(lowest_text_address == (CORE_ADDR) -1
- ? (text_addr + ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT))
+ ? (text_addr + ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile)))
: lowest_text_address)
+ text_size;
struct partial_symtab *subpst =
allocate_psymtab (include_list[i], objfile);
+ /* Copy the sesction_offsets array from the main psymtab. */
subpst->section_offsets = pst->section_offsets;
subpst->read_symtab_private =
(char *) obstack_alloc (&objfile->psymbol_obstack,
sym_size = LDSYMLEN (pst);
text_offset = pst->textlow;
text_size = pst->texthigh - pst->textlow;
+ /* This cannot be simply objfile->section_offsets because of
+ elfstab_offset_sections() which initializes the psymtab section
+ offsets information in a special way, and that is different from
+ objfile->section_offsets. */
section_offsets = pst->section_offsets;
current_objfile = objfile;
if (last_source_start_addr > text_offset)
last_source_start_addr = text_offset;
- pst->symtab = end_symtab (text_offset + text_size, objfile, SECT_OFF_TEXT);
+ pst->symtab = end_symtab (text_offset + text_size, objfile, SECT_OFF_TEXT (objfile));
/* Process items which we had to "process_later" due to dependancies
on other stabs. */
NAME is the symbol name, in our address space.
SECTION_OFFSETS is a set of amounts by which the sections of this object
file were relocated when it was loaded into memory.
+ Note that these section_offsets are not the
+ objfile->section_offsets but the pst->section_offsets.
All symbols that refer
to memory locations need to be offset by these amounts.
OBJFILE is the object file from which we are reading symbols.
if (!block_address_function_relative)
/* N_LBRAC, N_RBRAC and N_SLINE entries are not relative to the
function start address, so just use the text offset. */
- function_start_offset = ANOFFSET (section_offsets, SECT_OFF_TEXT);
+ function_start_offset = ANOFFSET (section_offsets, SECT_OFF_TEXT (objfile));
/* Something is wrong if we see real data before
seeing a source file name. */
}
/* Relocate for dynamic loading */
- valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+ valu += ANOFFSET (section_offsets, SECT_OFF_TEXT (objfile));
#ifdef SMASH_TEXT_ADDRESS
SMASH_TEXT_ADDRESS (valu);
#endif
case N_FN_SEQ:
/* This kind of symbol indicates the start of an object file. */
/* Relocate for dynamic loading */
- valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+ valu += ANOFFSET (section_offsets, SECT_OFF_TEXT (objfile));
break;
case N_SO:
Finish the symbol table of the previous source file
(if any) and start accumulating a new symbol table. */
/* Relocate for dynamic loading */
- valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+ valu += ANOFFSET (section_offsets, SECT_OFF_TEXT (objfile));
n_opt_found = 0;
patch_subfile_names (current_subfile, name);
break; /* Ignore repeated SOs */
}
- end_symtab (valu, objfile, SECT_OFF_TEXT);
+ end_symtab (valu, objfile, SECT_OFF_TEXT (objfile));
end_stabs ();
}
included in the compilation of the main source file
(whose name was given in the N_SO symbol.) */
/* Relocate for dynamic loading */
- valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+ valu += ANOFFSET (section_offsets, SECT_OFF_TEXT (objfile));
start_subfile (name, current_subfile->dirname);
break;
elfstab_offset_sections ever starts dealing with the
text offset, and we still need to do this, we need to
invent a SECT_OFF_ADDR_KLUDGE or something. */
- valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+ valu += ANOFFSET (section_offsets, SECT_OFF_TEXT (objfile));
goto define_a_symbol;
}
}
case_N_STSYM: /* Static symbol in data seg */
case N_DSLINE: /* Source line number, data seg */
- valu += ANOFFSET (section_offsets, SECT_OFF_DATA);
+ valu += ANOFFSET (section_offsets, SECT_OFF_DATA (objfile));
goto define_a_symbol;
case_N_LCSYM: /* Static symbol in BSS seg */
case N_BSLINE: /* Source line number, bss seg */
/* N_BROWS: overlaps with N_BSLINE */
- valu += ANOFFSET (section_offsets, SECT_OFF_BSS);
+ valu += ANOFFSET (section_offsets, SECT_OFF_BSS (objfile));
goto define_a_symbol;
case_N_ROSYM: /* Static symbol in Read-only data seg */
- valu += ANOFFSET (section_offsets, SECT_OFF_RODATA);
+ valu += ANOFFSET (section_offsets, SECT_OFF_RODATA (objfile));
goto define_a_symbol;
case N_ENTRY: /* Alternate entry point */
/* Relocate for dynamic loading */
- valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+ valu += ANOFFSET (section_offsets, SECT_OFF_TEXT (objfile));
goto define_a_symbol;
/* The following symbol types we don't know how to process. Handle
/* Deal with the SunPRO 3.0 compiler which omits the address
from N_FUN symbols. */
if (type == N_FUN
- && valu == ANOFFSET (section_offsets, SECT_OFF_TEXT))
+ && valu == ANOFFSET (section_offsets, SECT_OFF_TEXT (objfile)))
valu =
find_stab_function_addr (name, last_source_file, objfile);
#endif
function_start_offset = valu;
within_function = 1;
+
+ if (context_stack_depth > 1)
+ {
+ complain (&lbrac_unmatched_complaint, symnum);
+ break;
+ }
+
if (context_stack_depth > 0)
{
new = pop_context ();
finish_block (new->name, &local_symbols, new->old_blocks,
new->start_addr, valu, objfile);
}
- /* Stack must be empty now. */
- if (context_stack_depth != 0)
- complain (&lbrac_unmatched_complaint, symnum);
new = push_context (0, valu);
new->name = define_symbol (valu, name, desc, type, objfile);
projects / deliverable / binutils-gdb.git / blobdiff