/* *INDENT-OFF* */ /* ATTR_FORMAT confuses indent, avoid running it for now */
/* Basic, host-specific, and target-specific definitions for GDB.
- Copyright (C) 1986, 1989, 1991-1996, 1998-2000
+ Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+ 1997, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This file is part of GDB.
issue is found that we spend the effort on algorithmic
optimizations than micro-optimizing.'' J.T. */
-#define STRCMP(a,b) (*(a) == *(b) ? strcmp ((a), (b)) : (int)*(a) - (int)*(b))
#define STREQ(a,b) (*(a) == *(b) ? !strcmp ((a), (b)) : 0)
#define STREQN(a,b,c) (*(a) == *(b) ? !strncmp ((a), (b), (c)) : 0)
unspecified_precision
};
+/* The numbering of these signals is chosen to match traditional unix
+ signals (insofar as various unices use the same numbers, anyway).
+ It is also the numbering of the GDB remote protocol. Other remote
+ protocols, if they use a different numbering, should make sure to
+ translate appropriately.
+
+ Since these numbers have actually made it out into other software
+ (stubs, etc.), you mustn't disturb the assigned numbering. If you
+ need to add new signals here, add them to the end of the explicitly
+ numbered signals.
+
+ This is based strongly on Unix/POSIX signals for several reasons:
+ (1) This set of signals represents a widely-accepted attempt to
+ represent events of this sort in a portable fashion, (2) we want a
+ signal to make it from wait to child_wait to the user intact, (3) many
+ remote protocols use a similar encoding. However, it is
+ recognized that this set of signals has limitations (such as not
+ distinguishing between various kinds of SIGSEGV, or not
+ distinguishing hitting a breakpoint from finishing a single step).
+ So in the future we may get around this either by adding additional
+ signals for breakpoint, single-step, etc., or by adding signal
+ codes; the latter seems more in the spirit of what BSD, System V,
+ etc. are doing to address these issues. */
+
+/* For an explanation of what each signal means, see
+ target_signal_to_string. */
+
+enum target_signal
+ {
+ /* Used some places (e.g. stop_signal) to record the concept that
+ there is no signal. */
+ TARGET_SIGNAL_0 = 0,
+ TARGET_SIGNAL_FIRST = 0,
+ TARGET_SIGNAL_HUP = 1,
+ TARGET_SIGNAL_INT = 2,
+ TARGET_SIGNAL_QUIT = 3,
+ TARGET_SIGNAL_ILL = 4,
+ TARGET_SIGNAL_TRAP = 5,
+ TARGET_SIGNAL_ABRT = 6,
+ TARGET_SIGNAL_EMT = 7,
+ TARGET_SIGNAL_FPE = 8,
+ TARGET_SIGNAL_KILL = 9,
+ TARGET_SIGNAL_BUS = 10,
+ TARGET_SIGNAL_SEGV = 11,
+ TARGET_SIGNAL_SYS = 12,
+ TARGET_SIGNAL_PIPE = 13,
+ TARGET_SIGNAL_ALRM = 14,
+ TARGET_SIGNAL_TERM = 15,
+ TARGET_SIGNAL_URG = 16,
+ TARGET_SIGNAL_STOP = 17,
+ TARGET_SIGNAL_TSTP = 18,
+ TARGET_SIGNAL_CONT = 19,
+ TARGET_SIGNAL_CHLD = 20,
+ TARGET_SIGNAL_TTIN = 21,
+ TARGET_SIGNAL_TTOU = 22,
+ TARGET_SIGNAL_IO = 23,
+ TARGET_SIGNAL_XCPU = 24,
+ TARGET_SIGNAL_XFSZ = 25,
+ TARGET_SIGNAL_VTALRM = 26,
+ TARGET_SIGNAL_PROF = 27,
+ TARGET_SIGNAL_WINCH = 28,
+ TARGET_SIGNAL_LOST = 29,
+ TARGET_SIGNAL_USR1 = 30,
+ TARGET_SIGNAL_USR2 = 31,
+ TARGET_SIGNAL_PWR = 32,
+ /* Similar to SIGIO. Perhaps they should have the same number. */
+ TARGET_SIGNAL_POLL = 33,
+ TARGET_SIGNAL_WIND = 34,
+ TARGET_SIGNAL_PHONE = 35,
+ TARGET_SIGNAL_WAITING = 36,
+ TARGET_SIGNAL_LWP = 37,
+ TARGET_SIGNAL_DANGER = 38,
+ TARGET_SIGNAL_GRANT = 39,
+ TARGET_SIGNAL_RETRACT = 40,
+ TARGET_SIGNAL_MSG = 41,
+ TARGET_SIGNAL_SOUND = 42,
+ TARGET_SIGNAL_SAK = 43,
+ TARGET_SIGNAL_PRIO = 44,
+ TARGET_SIGNAL_REALTIME_33 = 45,
+ TARGET_SIGNAL_REALTIME_34 = 46,
+ TARGET_SIGNAL_REALTIME_35 = 47,
+ TARGET_SIGNAL_REALTIME_36 = 48,
+ TARGET_SIGNAL_REALTIME_37 = 49,
+ TARGET_SIGNAL_REALTIME_38 = 50,
+ TARGET_SIGNAL_REALTIME_39 = 51,
+ TARGET_SIGNAL_REALTIME_40 = 52,
+ TARGET_SIGNAL_REALTIME_41 = 53,
+ TARGET_SIGNAL_REALTIME_42 = 54,
+ TARGET_SIGNAL_REALTIME_43 = 55,
+ TARGET_SIGNAL_REALTIME_44 = 56,
+ TARGET_SIGNAL_REALTIME_45 = 57,
+ TARGET_SIGNAL_REALTIME_46 = 58,
+ TARGET_SIGNAL_REALTIME_47 = 59,
+ TARGET_SIGNAL_REALTIME_48 = 60,
+ TARGET_SIGNAL_REALTIME_49 = 61,
+ TARGET_SIGNAL_REALTIME_50 = 62,
+ TARGET_SIGNAL_REALTIME_51 = 63,
+ TARGET_SIGNAL_REALTIME_52 = 64,
+ TARGET_SIGNAL_REALTIME_53 = 65,
+ TARGET_SIGNAL_REALTIME_54 = 66,
+ TARGET_SIGNAL_REALTIME_55 = 67,
+ TARGET_SIGNAL_REALTIME_56 = 68,
+ TARGET_SIGNAL_REALTIME_57 = 69,
+ TARGET_SIGNAL_REALTIME_58 = 70,
+ TARGET_SIGNAL_REALTIME_59 = 71,
+ TARGET_SIGNAL_REALTIME_60 = 72,
+ TARGET_SIGNAL_REALTIME_61 = 73,
+ TARGET_SIGNAL_REALTIME_62 = 74,
+ TARGET_SIGNAL_REALTIME_63 = 75,
+
+ /* Used internally by Solaris threads. See signal(5) on Solaris. */
+ TARGET_SIGNAL_CANCEL = 76,
+
+ /* Yes, this pains me, too. But LynxOS didn't have SIG32, and now
+ Linux does, and we can't disturb the numbering, since it's part
+ of the protocol. Note that in some GDB's TARGET_SIGNAL_REALTIME_32
+ is number 76. */
+ TARGET_SIGNAL_REALTIME_32,
+ /* Yet another pain, IRIX 6 has SIG64. */
+ TARGET_SIGNAL_REALTIME_64,
+
+#if defined(MACH) || defined(__MACH__)
+ /* Mach exceptions */
+ TARGET_EXC_BAD_ACCESS,
+ TARGET_EXC_BAD_INSTRUCTION,
+ TARGET_EXC_ARITHMETIC,
+ TARGET_EXC_EMULATION,
+ TARGET_EXC_SOFTWARE,
+ TARGET_EXC_BREAKPOINT,
+#endif
+ TARGET_SIGNAL_INFO,
+
+ /* Some signal we don't know about. */
+ TARGET_SIGNAL_UNKNOWN,
+
+ /* Use whatever signal we use when one is not specifically specified
+ (for passing to proceed and so on). */
+ TARGET_SIGNAL_DEFAULT,
+
+ /* Last and unused enum value, for sizing arrays, etc. */
+ TARGET_SIGNAL_LAST
+ };
+
/* the cleanup list records things that have to be undone
if an error happens (descriptors to be closed, memory to be freed, etc.)
Each link in the chain records a function to call and an
extern int query (char *, ...) ATTR_FORMAT (printf, 1, 2);
-#if !defined (USE_MMALLOC)
-/* NOTE: cagney/2000-03-04: The mmalloc functions need to use PTR
- rather than void* so that they are consistent with
- ../mmalloc/mmalloc.h. */
-extern PTR mcalloc (PTR, size_t, size_t);
-extern PTR mmalloc (PTR, size_t);
-extern PTR mrealloc (PTR, PTR, size_t);
-extern void mfree (PTR, PTR);
-#endif
-
extern void init_page_info (void);
extern CORE_ADDR host_pointer_to_address (void *ptr);
#include "ui-file.h"
-/* More generic printf like operations */
+/* More generic printf like operations. Filtered versions may return
+ non-locally on error. */
extern void fputs_filtered (const char *, struct ui_file *);
extern int fputc_unfiltered (int c, struct ui_file *);
+extern int putchar_filtered (int c);
+
extern int putchar_unfiltered (int c);
extern void puts_filtered (const char *);
/* From source.c */
-extern int openp (char *, int, char *, int, int, char **);
+extern int openp (const char *, int, const char *, int, int, char **);
extern int source_full_path_of (char *, char **);
struct continuation_arg *arg_list;
struct continuation *next;
};
-struct continuation continuation;
/* In infrun.c. */
extern struct continuation *cmd_continuation;
/* Use the default setting which the user has specified. */
Val_pretty_default
};
+
+/* The ptid struct is a collection of the various "ids" necessary
+ for identifying the inferior. This consists of the process id
+ (pid), thread id (tid), and other fields necessary for uniquely
+ identifying the inferior process/thread being debugged. When
+ manipulating ptids, the constructors, accessors, and predicate
+ declared in inferior.h should be used. These are as follows:
+
+ ptid_build - Make a new ptid from a pid, lwp, and tid.
+ pid_to_ptid - Make a new ptid from just a pid.
+ ptid_get_pid - Fetch the pid component of a ptid.
+ ptid_get_lwp - Fetch the lwp component of a ptid.
+ ptid_get_tid - Fetch the tid component of a ptid.
+ ptid_equal - Test to see if two ptids are equal.
+
+ Please do NOT access the struct ptid members directly (except, of
+ course, in the implementation of the above ptid manipulation
+ functions). */
+
+struct ptid
+ {
+ /* Process id */
+ int pid;
+
+ /* Lightweight process id */
+ long lwp;
+
+ /* Thread id */
+ long tid;
+ };
+
+typedef struct ptid ptid_t;
+
\f
/* Optional host machine definition. Pure autoconf targets will not
#include "fopen-same.h"
#endif
-/* Microsoft C can't deal with const pointers */
-
-#ifdef _MSC_VER
-#define CONST_PTR
-#else
#define CONST_PTR const
-#endif
-
-/*
- * Allow things in gdb to be declared "volatile". If compiling ANSI, it
- * just works. If compiling with gcc but non-ansi, redefine to __volatile__.
- * If non-ansi, non-gcc, then eliminate "volatile" entirely, making those
- * objects be read-write rather than read-only.
- */
-
-#ifndef volatile
-#ifndef __STDC__
-#ifdef __GNUC__
-#define volatile __volatile__
-#else
-#define volatile /* nothing */
-#endif /* GNUC */
-#endif /* STDC */
-#endif /* volatile */
/* Defaults for system-wide constants (if not defined by xm.h, we fake it).
FIXME: Assumes 2's complement arithmetic */
#endif
#if !defined (ULONGEST_MAX)
-#define ULONGEST_MAX (~(ULONGEST)0) /* 0xFFFFFFFFFFFFFFFF for 32-bits */
+#define ULONGEST_MAX (~(ULONGEST)0) /* 0xFFFFFFFFFFFFFFFF for 64-bits */
#endif
-#if !defined (LONGEST_MAX) /* 0x7FFFFFFFFFFFFFFF for 32-bits */
+#if !defined (LONGEST_MAX) /* 0x7FFFFFFFFFFFFFFF for 64-bits */
#define LONGEST_MAX ((LONGEST)(ULONGEST_MAX >> 1))
#endif
/* Assorted functions we can declare, now that const and volatile are
defined. */
-extern char *savestring (const char *, int);
-
-extern char *msavestring (void *, const char *, int);
+extern char *savestring (const char *, size_t);
-extern char *strsave (const char *);
+extern char *msavestring (void *, const char *, size_t);
extern char *mstrsave (void *, const char *);
-/* FIXME; was long, but this causes compile errors in msvc if already
- defined */
-#ifdef _MSC_VER
-extern PTR xmmalloc (PTR, size_t);
-extern PTR xmrealloc (PTR, PTR, size_t);
-#else
-extern PTR xmmalloc (PTR, long);
-extern PTR xmrealloc (PTR, PTR, long);
+#if !defined (USE_MMALLOC)
+/* NOTE: cagney/2000-03-04: The mmalloc functions need to use PTR
+ rather than void* so that they are consistent with the delcaration
+ in ../mmalloc/mmalloc.h. */
+extern PTR mcalloc (PTR, size_t, size_t);
+extern PTR mmalloc (PTR, size_t);
+extern PTR mrealloc (PTR, PTR, size_t);
+extern void mfree (PTR, PTR);
#endif
+/* Robust versions of same. Throw an internal error when no memory,
+ guard against stray NULL arguments. */
+extern void *xmmalloc (void *md, size_t size);
+extern void *xmrealloc (void *md, void *ptr, size_t size);
+extern void *xmcalloc (void *md, size_t number, size_t size);
+extern void xmfree (void *md, void *ptr);
+
+/* xmalloc(), xrealloc() and xcalloc() have already been declared in
+ "libiberty.h". */
+extern void xfree (void *);
+
+/* Like asprintf/vasprintf but get an internal_error if the call
+ fails. */
+extern void xasprintf (char **ret, const char *format, ...) ATTR_FORMAT (printf, 2, 3);
+extern void xvasprintf (char **ret, const char *format, va_list ap);
+
extern int parse_escape (char **);
/* Message to be printed before the error message, when an error occurs. */
message. */
extern char *error_last_message (void);
-extern NORETURN void internal_verror (const char *, va_list ap) ATTR_NORETURN;
+extern NORETURN void internal_verror (const char *file, int line,
+ const char *, va_list ap) ATTR_NORETURN;
-extern NORETURN void internal_error (char *, ...) ATTR_NORETURN;
+extern NORETURN void internal_error (const char *file, int line,
+ const char *, ...) ATTR_NORETURN ATTR_FORMAT (printf, 3, 4);
extern NORETURN void nomem (long) ATTR_NORETURN;
#endif
#ifdef HAVE_STDLIB_H
-#if defined(_MSC_VER) && !defined(__cplusplus)
-/* msvc defines these in stdlib.h for c code */
-#undef min
-#undef max
-#endif
#include <stdlib.h>
#endif
#ifndef min
extern double atof (const char *); /* X3.159-1989 4.10.1.1 */
#endif
-#ifndef MALLOC_INCOMPATIBLE
-
-#ifdef NEED_DECLARATION_MALLOC
-extern PTR malloc ();
-#endif
-
-#ifdef NEED_DECLARATION_REALLOC
-extern PTR realloc ();
-#endif
-
-#ifdef NEED_DECLARATION_FREE
-extern void free ();
-#endif
-
-#endif /* MALLOC_INCOMPATIBLE */
-
/* Various possibilities for alloca. */
#ifndef alloca
#ifdef __GNUC__
/* We need to be careful not to declare this in a way which conflicts with
bison. Bison never declares it as char *, but under various circumstances
(like __hpux) we need to use void *. */
-#if defined (__STDC__) || defined (__hpux)
extern void *alloca ();
-#else /* Don't use void *. */
-extern char *alloca ();
-#endif /* Don't use void *. */
#endif /* Not _AIX */
#endif /* Not HAVE_ALLOCA_H */
#endif /* Not GNU C */
#define TARGET_CHAR_BIT 8
#endif
-/* Number of bits in a short or unsigned short for the target machine. */
-#if !defined (TARGET_SHORT_BIT)
-#define TARGET_SHORT_BIT (2 * TARGET_CHAR_BIT)
-#endif
-
-/* Number of bits in an int or unsigned int for the target machine. */
-#if !defined (TARGET_INT_BIT)
-#define TARGET_INT_BIT (4 * TARGET_CHAR_BIT)
-#endif
-
-/* Number of bits in a long or unsigned long for the target machine. */
-#if !defined (TARGET_LONG_BIT)
-#define TARGET_LONG_BIT (4 * TARGET_CHAR_BIT)
-#endif
-
-/* Number of bits in a long long or unsigned long long for the target machine. */
-#if !defined (TARGET_LONG_LONG_BIT)
-#define TARGET_LONG_LONG_BIT (2 * TARGET_LONG_BIT)
-#endif
-
-/* Number of bits in a float for the target machine. */
-#if !defined (TARGET_FLOAT_BIT)
-#define TARGET_FLOAT_BIT (4 * TARGET_CHAR_BIT)
-#endif
-
-/* Number of bits in a double for the target machine. */
-#if !defined (TARGET_DOUBLE_BIT)
-#define TARGET_DOUBLE_BIT (8 * TARGET_CHAR_BIT)
-#endif
-
-/* Number of bits in a long double for the target machine. */
-#if !defined (TARGET_LONG_DOUBLE_BIT)
-#define TARGET_LONG_DOUBLE_BIT (2 * TARGET_DOUBLE_BIT)
-#endif
-
-/* Number of bits in a pointer for the target machine */
-#if !defined (TARGET_PTR_BIT)
-#define TARGET_PTR_BIT TARGET_INT_BIT
-#endif
-
-/* Number of bits in a BFD_VMA for the target object file format. */
-#if !defined (TARGET_BFD_VMA_BIT)
-#define TARGET_BFD_VMA_BIT TARGET_PTR_BIT
-#endif
-
/* If we picked up a copy of CHAR_BIT from a configuration file
(which may get it by including <limits.h>) then use it to set
the number of bits in a host char. If not, use the same size
char *, DOUBLEST *);
extern void floatformat_from_doublest (const struct floatformat *,
DOUBLEST *, char *);
-extern DOUBLEST extract_floating (void *, int);
+extern int floatformat_is_negative (const struct floatformat *, char *);
+extern int floatformat_is_nan (const struct floatformat *, char *);
+extern char *floatformat_mantissa (const struct floatformat *, char *);
+
+extern DOUBLEST extract_floating (void *, int);
extern void store_floating (void *, int, DOUBLEST);
\f
/* On some machines there are bits in addresses which are not really
extern void (*register_changed_hook) (int regno);
extern void (*memory_changed_hook) (CORE_ADDR addr, int len);
extern void (*context_hook) (int);
-extern int (*target_wait_hook) (int pid, struct target_waitstatus * status);
+extern ptid_t (*target_wait_hook) (ptid_t ptid,
+ struct target_waitstatus * status);
extern void (*attach_hook) (void);
extern void (*detach_hook) (void);
#define DIRNAME_SEPARATOR ':'
#endif
-#ifndef SLASH_P
-#if defined(__GO32__)||defined(_WIN32)
-#define SLASH_P(X) ((X)=='\\')
-#else
-#define SLASH_P(X) ((X)=='/')
-#endif
-#endif
-
-#ifndef SLASH_CHAR
-#if defined(__GO32__)||defined(_WIN32)
-#define SLASH_CHAR '\\'
-#else
-#define SLASH_CHAR '/'
-#endif
-#endif
-
#ifndef SLASH_STRING
-#if defined(__GO32__)||defined(_WIN32)
+#ifdef _WIN32
#define SLASH_STRING "\\"
#else
#define SLASH_STRING "/"
#endif
#endif
-#ifndef ROOTED_P
-#define ROOTED_P(X) (SLASH_P((X)[0]))
-#endif
-
-/* On some systems, PIDGET is defined to extract the inferior pid from
- an internal pid that has the thread id and pid in seperate bit
- fields. If not defined, then just use the entire internal pid as
- the actual pid. */
+/* Provide default definitions of PIDGET, TIDGET, and MERGEPID.
+ The name ``TIDGET'' is a historical accident. Many uses of TIDGET
+ in the code actually refer to a lightweight process id, i.e,
+ something that can be considered a process id in its own right for
+ certain purposes. */
#ifndef PIDGET
-#define PIDGET(PID) (PID)
-#define TIDGET(PID) 0
-#define MERGEPID(PID, TID) (PID)
-#endif
-
-/* If under Cygwin, provide backwards compatibility with older
- Cygwin compilers that don't define the current cpp define. */
-#ifdef __CYGWIN32__
-#ifndef __CYGWIN__
-#define __CYGWIN__
-#endif
+#define PIDGET(PTID) (ptid_get_pid (PTID))
+#define TIDGET(PTID) (ptid_get_lwp (PTID))
+#define MERGEPID(PID, TID) ptid_build (PID, TID, 0)
#endif
/* Define well known filenos if the system does not define them. */
projects / deliverable / binutils-gdb.git / blobdiff