command files specified with @samp{-x} (and all commands from
initialization files, if not inhibited with @samp{-n}). Exit with
nonzero status if an error occurs in executing the @value{GDBN} commands
-in the command files.
+in the command files. Batch mode also disables pagination;
+@pxref{Screen Size} and acts as if @kbd{set confirm off} were in
+effect (@pxref{Messages/Warnings}).
Batch mode may be useful for running @value{GDBN} as a filter, for
example to download and run a program on another computer; in order to
@cindex @code{$_} and @code{info breakpoints}
@item info breakpoints @r{[}@var{n}@r{]}
@itemx info break @r{[}@var{n}@r{]}
-@itemx info watchpoints @r{[}@var{n}@r{]}
Print a table of all breakpoints, watchpoints, and catchpoints set and
not deleted. Optional argument @var{n} means print information only
about the specified breakpoint (or watchpoint or catchpoint). For
@kindex info watchpoints @r{[}@var{n}@r{]}
@item info watchpoints
-This command prints a list of watchpoints, breakpoints, and catchpoints;
-it is the same as @code{info break} (@pxref{Set Breaks}).
+This command prints a list of watchpoints, using the same format as
+@code{info break} (@pxref{Set Breaks}).
@end table
@value{GDBN} sets a @dfn{hardware watchpoint} if possible. Hardware
and @sc{gnu}/Linux.
@item syscall
-@itemx syscall @r{[}@var{name} @r{|} @var{number}@r{]} @r{...}
+@itemx syscall @r{[}@var{name} @r{|} @var{number}@r{]} @dots{}
@cindex break on a system call.
A call to or return from a system call, a.k.a.@: @dfn{syscall}. A
syscall is a mechanism for application programs to request a service
that you can @dfn{enable} it again later.
You disable and enable breakpoints, watchpoints, and catchpoints with
-the @code{enable} and @code{disable} commands, optionally specifying one
-or more breakpoint numbers as arguments. Use @code{info break} or
-@code{info watch} to print a list of breakpoints, watchpoints, and
-catchpoints if you do not know which numbers to use.
+the @code{enable} and @code{disable} commands, optionally specifying
+one or more breakpoint numbers as arguments. Use @code{info break} to
+print a list of all breakpoints, watchpoints, and catchpoints if you
+do not know which numbers to use.
Disabling and enabling a breakpoint that has multiple locations
affects all of its locations.
@table @code
@kindex commands
@kindex end@r{ (breakpoint commands)}
-@item commands @r{[}@var{bnum}@r{]}
+@item commands @r{[}@var{range}@dots{}@r{]}
@itemx @dots{} @var{command-list} @dots{}
@itemx end
-Specify a list of commands for breakpoint number @var{bnum}. The commands
+Specify a list of commands for the given breakpoints. The commands
themselves appear on the following lines. Type a line containing just
@code{end} to terminate the commands.
To remove all commands from a breakpoint, type @code{commands} and
follow it immediately with @code{end}; that is, give no commands.
-With no @var{bnum} argument, @code{commands} refers to the last
-breakpoint, watchpoint, or catchpoint set (not to the breakpoint most
-recently encountered).
+With no argument, @code{commands} refers to the last breakpoint,
+watchpoint, or catchpoint set (not to the breakpoint most recently
+encountered). If the most recent breakpoints were set with a single
+command, then the @code{commands} will apply to all the breakpoints
+set by that command. This applies to breakpoints set by
+@code{rbreak}, and also applies when a single @code{break} command
+creates multiple breakpoints (@pxref{Ambiguous Expressions,,Ambiguous
+Expressions}).
@end table
Pressing @key{RET} as a means of repeating the last @value{GDBN} command is
command (abbreviated @code{p}), or its synonym @code{inspect}. It
evaluates and prints the value of an expression of the language your
program is written in (@pxref{Languages, ,Using @value{GDBN} with
-Different Languages}).
+Different Languages}). It may also print the expression using a
+Python-based pretty-printer (@pxref{Pretty Printing}).
@table @code
@item print @var{expr}
@item r
@cindex raw printing
Print using the @samp{raw} formatting. By default, @value{GDBN} will
-use a type-specific pretty-printer. The @samp{r} format bypasses any
-pretty-printer which might exist for the value's type.
+use a Python-based pretty-printer, if one is available (@pxref{Pretty
+Printing}). This typically results in a higher-level display of the
+value's contents. The @samp{r} format bypasses any Python
+pretty-printer which might exist.
@end table
For example, to print the program counter in hex (@pxref{Registers}), type
commands to examine the values these data had at the time the
tracepoint was hit.
-Tracepoints do not support every breakpoint feature. Conditional
-expressions and ignore counts on tracepoints have no effect, and
-tracepoints cannot run @value{GDBN} commands when they are
-hit. Tracepoints may not be thread-specific either.
+Tracepoints do not support every breakpoint feature. Ignore counts on
+tracepoints have no effect, and tracepoints cannot run @value{GDBN}
+commands when they are hit. Tracepoints may not be thread-specific
+either.
@cindex fast tracepoints
Some targets may support @dfn{fast tracepoints}, which are inserted in
* Tracepoint Actions::
* Listing Tracepoints::
* Starting and Stopping Trace Experiments::
+* Tracepoint Restrictions::
@end menu
@node Create and Delete Tracepoints
@code{actions} without bothering about its number). You specify the
actions themselves on the following lines, one action at a time, and
terminate the actions list with a line containing just @code{end}. So
-far, the only defined actions are @code{collect} and
+far, the only defined actions are @code{collect}, @code{teval}, and
@code{while-stepping}.
@cindex remove actions from a tracepoint
commands indicating the things to be collected when the tracepoint is
hit. Then, in order to single-step and collect additional data
following the tracepoint, a @code{while-stepping} command is used,
-followed by the list of things to be collected while stepping. The
-@code{while-stepping} command is terminated by its own separate
-@code{end} command. Lastly, the action list is terminated by an
-@code{end} command.
+followed by the list of things to be collected after each step in a
+sequence of single steps. The @code{while-stepping} command is
+terminated by its own separate @code{end} command. Lastly, the action
+list is terminated by an @code{end} command.
@smallexample
(@value{GDBP}) @b{trace foo}
@kindex while-stepping @r{(tracepoints)}
@item while-stepping @var{n}
-Perform @var{n} single-step traces after the tracepoint, collecting
-new data at each step. The @code{while-stepping} command is
-followed by the list of what to collect while stepping (followed by
-its own @code{end} command):
+Perform @var{n} single-step instruction traces after the tracepoint,
+collecting new data after each step. The @code{while-stepping}
+command is followed by the list of what to collect while stepping
+(followed by its own @code{end} command):
@smallexample
> while-stepping 12
@end smallexample
@noindent
-You may abbreviate @code{while-stepping} as @code{ws} or
+Note that @code{$pc} is not automatically collected by
+@code{while-stepping}; you need to explicitly collect that register if
+you need it. You may abbreviate @code{while-stepping} as @code{ws} or
@code{stepping}.
@item set default-collect @var{expr1}, @var{expr2}, @dots{}
necessarily heuristic, and it may result in useless tracepoints being
created; you may simply delete them if they are of no use.
+@cindex circular trace buffer
+If your target agent supports a @dfn{circular trace buffer}, then you
+can run a trace experiment indefinitely without filling the trace
+buffer; when space runs out, the agent deletes already-collected trace
+frames, oldest first, until there is enough room to continue
+collecting. This is especially useful if your tracepoints are being
+hit too often, and your trace gets terminated prematurely because the
+buffer is full. To ask for a circular trace buffer, simply set
+@samp{circular_trace_buffer} to on. You can set this at any time,
+including during tracing; if the agent can do it, it will change
+buffer handling on the fly, otherwise it will not take effect until
+the next run.
+
+@table @code
+@item set circular-trace-buffer on
+@itemx set circular-trace-buffer off
+@kindex set circular-trace-buffer
+Choose whether a tracing run should use a linear or circular buffer
+for trace data. A linear buffer will not lose any trace data, but may
+fill up prematurely, while a circular buffer will discard old trace
+data, but it will have always room for the latest tracepoint hits.
+
+@item show circular-trace-buffer
+@kindex show circular-trace-buffer
+Show the current choice for the trace buffer. Note that this may not
+match the agent's current buffer handling, nor is it guaranteed to
+match the setting that might have been in effect during a past run,
+for instance if you are looking at frames from a trace file.
+
+@end table
+
+@node Tracepoint Restrictions
+@subsection Tracepoint Restrictions
+
+@cindex tracepoint restrictions
+There are a number of restrictions on the use of tracepoints. As
+described above, tracepoint data gathering occurs on the target
+without interaction from @value{GDBN}. Thus the full capabilities of
+the debugger are not available during data gathering, and then at data
+examination time, you will be limited by only having what was
+collected. The following items describe some common problems, but it
+is not exhaustive, and you may run into additional difficulties not
+mentioned here.
+
+@itemize @bullet
+
+@item
+Tracepoint expressions are intended to gather objects (lvalues). Thus
+the full flexibility of GDB's expression evaluator is not available.
+You cannot call functions, cast objects to aggregate types, access
+convenience variables or modify values (except by assignment to trace
+state variables). Some language features may implicitly call
+functions (for instance Objective-C fields with accessors), and therefore
+cannot be collected either.
+
+@item
+Collection of local variables, either individually or in bulk with
+@code{$locals} or @code{$args}, during @code{while-stepping} may
+behave erratically. The stepping action may enter a new scope (for
+instance by stepping into a function), or the location of the variable
+may change (for instance it is loaded into a register). The
+tracepoint data recorded uses the location information for the
+variables that is correct for the tracepoint location. When the
+tracepoint is created, it is not possible, in general, to determine
+where the steps of a @code{while-stepping} sequence will advance the
+program---particularly if a conditional branch is stepped.
+
+@item
+Collection of an incompletely-initialized or partially-destroyed object
+may result in something that @value{GDBN} cannot display, or displays
+in a misleading way.
+
+@item
+When @value{GDBN} displays a pointer to character it automatically
+dereferences the pointer to also display characters of the string
+being pointed to. However, collecting the pointer during tracing does
+not automatically collect the string. You need to explicitly
+dereference the pointer and provide size information if you want to
+collect not only the pointer, but the memory pointed to. For example,
+@code{*ptr@@50} can be used to collect the 50 element array pointed to
+by @code{ptr}.
+
+@item
+It is not possible to collect a complete stack backtrace at a
+tracepoint. Instead, you may collect the registers and a few hundred
+bytes from the stack pointer with something like @code{*$esp@@300}
+(adjust to use the name of the actual stack pointer register on your
+target architecture, and the amount of stack you wish to capture).
+Then the @code{backtrace} command will show a partial backtrace when
+using a trace frame. The number of stack frames that can be examined
+depends on the sizes of the frames in the collected stack. Note that
+if you ask for a block so large that it goes past the bottom of the
+stack, the target agent may report an error trying to read from an
+invalid address.
+
+@item
+If you do not collect registers at a tracepoint, @value{GDBN} can
+infer that the value of @code{$pc} must be the same as the address of
+the tracepoint and use that when you are looking at a trace frame
+for that tracepoint. However, this cannot work if the tracepoint has
+multiple locations (for instance if it was set in a function that was
+inlined), or if it has a @code{while-stepping} loop. In those cases
+@value{GDBN} will warn you that it can't infer @code{$pc}, and default
+it to zero.
+
+@end itemize
+
@node Analyze Collected Data
@section Using the Collected Data
(@value{GDBP})
@end smallexample
+@code{tdump} works by scanning the tracepoint's current collection
+actions and printing the value of each expression listed. So
+@code{tdump} can fail, if after a run, you change the tracepoint's
+actions to mention variables that were not collected during the run.
+
+Also, for tracepoints with @code{while-stepping} loops, @code{tdump}
+uses the collected value of @code{$pc} to distinguish between trace
+frames that were collected at the tracepoint hit, and frames that were
+collected while stepping. This allows it to correctly choose whether
+to display the basic list of collections, or the collections from the
+body of the while-stepping loop. However, if @code{$pc} was not collected,
+then @code{tdump} will always attempt to dump using the basic collection
+list, and may fail if a while-stepping frame does not include all the
+same data that is collected at the tracepoint hit.
+@c This is getting pretty arcane, example would be good.
+
@node save-tracepoints
@subsection @code{save-tracepoints @var{filename}}
@kindex save-tracepoints
system, and you can put it somewhere in memory where it won't get
clobbered by the download.
-@item target sim
+@item target sim @r{[}@var{simargs}@r{]} @dots{}
@cindex built-in simulator target
Builtin CPU simulator. @value{GDBN} includes simulators for most architectures.
In general,
Show the setting of RDI heartbeat packets.
@end table
+@table @code
+@item target sim @r{[}@var{simargs}@r{]} @dots{}
+The @value{GDBN} ARM simulator accepts the following optional arguments.
+
+@table @code
+@item --swi-support=@var{type}
+Tell the simulator which SWI interfaces to support.
+@var{type} may be a comma separated list of the following values.
+The default value is @code{all}.
+
+@table @code
+@item none
+@item demon
+@item angel
+@item redboot
+@item all
+@end table
+@end table
+@end table
@node M32R/D
@subsection Renesas M32R/D and M32R/SDI
@itemx set pagination off
@kindex set pagination
Turn the output pagination on or off; the default is on. Turning
-pagination off is the alternative to @code{set height 0}.
+pagination off is the alternative to @code{set height 0}. Note that
+running @value{GDBN} with the @option{--batch} option (@pxref{Mode
+Options, -batch}) also automatically disables pagination.
@item show pagination
@kindex show pagination
@cindex confirmation
@cindex stupid questions
@item set confirm off
-Disables confirmation requests.
+Disables confirmation requests. Note that running @value{GDBN} with
+the @option{--batch} option (@pxref{Mode Options, -batch}) also
+automatically disables confirmation requests.
@item set confirm on
Enables confirmation requests (the default).
@table @code
@kindex source
@cindex execute commands from a file
-@item source [@code{-v}] @var{filename}
+@item source [-s] [-v] @var{filename}
Execute the command file @var{filename}.
@end table
printed as they are executed. An error in any command terminates
execution of the command file and control is returned to the console.
-@value{GDBN} searches for @var{filename} in the current directory and then
-on the search path (specified with the @samp{directory} command).
+@value{GDBN} first searches for @var{filename} in the current directory.
+If the file is not found there, and @var{filename} does not specify a
+directory, then @value{GDBN} also looks for the file on the source search path
+(specified with the @samp{directory} command);
+except that @file{$cdir} is not searched because the compilation directory
+is not relevant to scripts.
+
+If @code{-s} is specified, then @value{GDBN} searches for @var{filename}
+on the search path even if @var{filename} specifies a directory.
+The search is done by appending @var{filename} to each element of the
+search path. So, for example, if @var{filename} is @file{mylib/myscript}
+and the search path contains @file{/home/user} then @value{GDBN} will
+look for the script @file{/home/user/mylib/myscript}.
+The search is also done if @var{filename} is an absolute path.
+For example, if @var{filename} is @file{/tmp/myscript} and
+the search path contains @file{/home/user} then @value{GDBN} will
+look for the script @file{/home/user/tmp/myscript}.
+For DOS-like systems, if @var{filename} contains a drive specification,
+it is stripped before concatenation. For example, if @var{filename} is
+@file{d:myscript} and the search path contains @file{c:/tmp} then @value{GDBN}
+will look for the script @file{c:/tmp/myscript}.
If @code{-v}, for verbose mode, is given then @value{GDBN} displays
each command as it is executed. The option must be given before
* Selecting Pretty-Printers:: How GDB chooses a pretty-printer.
* Commands In Python:: Implementing new commands in Python.
* Functions In Python:: Writing new convenience functions.
+* Progspaces In Python:: Program spaces.
* Objfiles In Python:: Object files.
* Frames In Python:: Accessing inferior stack frames from Python.
* Blocks In Python:: Accessing frame blocks from Python.
* Symbols In Python:: Python representation of symbols.
* Symbol Tables In Python:: Python representation of symbol tables.
* Lazy Strings In Python:: Python representation of lazy strings.
+* Breakpoints In Python:: Manipulating breakpoints using Python.
@end menu
@node Basic Python
It must be a boolean value. If omitted, it defaults to @code{False}.
@end defun
+@findex gdb.breakpoints
+@defun breakpoints
+Return a sequence holding all of @value{GDBN}'s breakpoints.
+@xref{Breakpoints In Python}, for more information.
+@end defun
+
@findex gdb.parameter
@defun parameter parameter
Return the value of a @value{GDBN} parameter. @var{parameter} is a
function.
@end defun
+@findex gdb.target_charset
+@defun target_charset
+Return the name of the current target character set (@pxref{Character
+Sets}). This differs from @code{gdb.parameter('target-charset')} in
+that @samp{auto} is never returned.
+@end defun
+
+@findex gdb.target_wide_charset
+@defun target_wide_charset
+Return the name of the current target wide character set
+(@pxref{Character Sets}). This differs from
+@code{gdb.parameter('target-wide-charset')} in that @samp{auto} is
+never returned.
+@end defun
+
@node Exception Handling
@subsubsection Exception Handling
@cindex python exceptions
@item maint set python auto-load [yes|no]
Enable or disable the Python auto-loading feature.
-@kindex show python auto-load
-@item show python auto-load
+@kindex maint show python auto-load
+@item maint show python auto-load
Show whether Python auto-loading is enabled or disabled.
@end table
pretty-printer. Python scalars (integers, floats, and booleans) and
strings are convertible to @code{gdb.Value}; other types are not.
+Finally, if this method returns @code{None} then no further operations
+are peformed in this method and nothing is printed.
+
If the result is not one of these types, an exception is raised.
@end defop
The Python list @code{gdb.pretty_printers} contains an array of
functions that have been registered via addition as a pretty-printer.
+Each @code{gdb.Progspace} contains a @code{pretty_printers} attribute.
Each @code{gdb.Objfile} also contains a @code{pretty_printers}
attribute.
@code{None}.
@value{GDBN} first checks the @code{pretty_printers} attribute of each
-@code{gdb.Objfile} and iteratively calls each function in the list for
-that @code{gdb.Objfile} until it receives a pretty-printer object.
+@code{gdb.Objfile} in the current program space and iteratively calls
+each function in the list for that @code{gdb.Objfile} until it receives
+a pretty-printer object.
+If no pretty-printer is found in the objfile lists, @value{GDBN} then
+searches the pretty-printer list of the current program space,
+calling each function until an object is returned.
After these lists have been exhausted, it tries the global
@code{gdb.pretty-printers} list, again calling each function until an
object is returned.
Python code is read into @value{GDBN}, you may need to import the
@code{gdb} module explicitly.
+@node Progspaces In Python
+@subsubsection Program Spaces In Python
+
+@cindex progspaces in python
+@tindex gdb.Progspace
+@tindex Progspace
+A program space, or @dfn{progspace}, represents a symbolic view
+of an address space.
+It consists of all of the objfiles of the program.
+@xref{Objfiles In Python}.
+@xref{Inferiors and Programs, program spaces}, for more details
+about program spaces.
+
+The following progspace-related functions are available in the
+@code{gdb} module:
+
+@findex gdb.current_progspace
+@defun current_progspace
+This function returns the program space of the currently selected inferior.
+@xref{Inferiors and Programs}.
+@end defun
+
+@findex gdb.progspaces
+@defun progspaces
+Return a sequence of all the progspaces currently known to @value{GDBN}.
+@end defun
+
+Each progspace is represented by an instance of the @code{gdb.Progspace}
+class.
+
+@defivar Progspace filename
+The file name of the progspace as a string.
+@end defivar
+
+@defivar Progspace pretty_printers
+The @code{pretty_printers} attribute is a list of functions. It is
+used to look up pretty-printers. A @code{Value} is passed to each
+function in order; if the function returns @code{None}, then the
+search continues. Otherwise, the return value should be an object
+which is used to format the value. @xref{Pretty Printing}, for more
+information.
+@end defivar
+
@node Objfiles In Python
@subsubsection Objfiles In Python
@end defmethod
@end table
+@node Breakpoints In Python
+@subsubsection Manipulating breakpoints using Python
+
+@cindex breakpoints in python
+@tindex gdb.Breakpoint
+
+Python code can manipulate breakpoints via the @code{gdb.Breakpoint}
+class.
+
+@defmethod Breakpoint __init__ spec @r{[}type@r{]} @r{[}wp_class@r{]}
+Create a new breakpoint. @var{spec} is a string naming the
+location of the breakpoint, or an expression that defines a
+watchpoint. The contents can be any location recognized by the
+@code{break} command, or in the case of a watchpoint, by the @code{watch}
+command. The optional @var{type} denotes the breakpoint to create
+from the types defined later in this chapter. This argument can be
+either: @code{BP_BREAKPOINT} or @code{BP_WATCHPOINT}. @var{type}
+defaults to @code{BP_BREAKPOINT}. The optional @var{wp_class}
+argument defines the class of watchpoint to create, if @var{type} is
+defined as @code{BP_WATCHPOINT}. If a watchpoint class is not
+provided, it is assumed to be a @var{WP_WRITE} class.
+@end defmethod
+
+The available watchpoint types represented by constants are defined in the
+@code{gdb} module:
+
+@table @code
+@findex WP_READ
+@findex gdb.WP_READ
+@item WP_READ
+Read only watchpoint.
+
+@findex WP_WRITE
+@findex gdb.WP_WRITE
+@item WP_WRITE
+Write only watchpoint.
+
+@findex WP_ACCESS
+@findex gdb.WP_ACCESS
+@item WP_ACCESS
+Read/Write watchpoint.
+@end table
+
+@defmethod Breakpoint is_valid
+Return @code{True} if this @code{Breakpoint} object is valid,
+@code{False} otherwise. A @code{Breakpoint} object can become invalid
+if the user deletes the breakpoint. In this case, the object still
+exists, but the underlying breakpoint does not. In the cases of
+watchpoint scope, the watchpoint remains valid even if execution of the
+inferior leaves the scope of that watchpoint.
+@end defmethod
+
+@defivar Breakpoint enabled
+This attribute is @code{True} if the breakpoint is enabled, and
+@code{False} otherwise. This attribute is writable.
+@end defivar
+
+@defivar Breakpoint silent
+This attribute is @code{True} if the breakpoint is silent, and
+@code{False} otherwise. This attribute is writable.
+
+Note that a breakpoint can also be silent if it has commands and the
+first command is @code{silent}. This is not reported by the
+@code{silent} attribute.
+@end defivar
+
+@defivar Breakpoint thread
+If the breakpoint is thread-specific, this attribute holds the thread
+id. If the breakpoint is not thread-specific, this attribute is
+@code{None}. This attribute is writable.
+@end defivar
+
+@defivar Breakpoint task
+If the breakpoint is Ada task-specific, this attribute holds the Ada task
+id. If the breakpoint is not task-specific (or the underlying
+language is not Ada), this attribute is @code{None}. This attribute
+is writable.
+@end defivar
+
+@defivar Breakpoint ignore_count
+This attribute holds the ignore count for the breakpoint, an integer.
+This attribute is writable.
+@end defivar
+
+@defivar Breakpoint number
+This attribute holds the breakpoint's number --- the identifier used by
+the user to manipulate the breakpoint. This attribute is not writable.
+@end defivar
+
+@defivar Breakpoint type
+This attribute holds the breakpoint's type --- the identifier used to
+determine the actual breakpoint type or use-case. This attribute is not
+writable.
+@end defivar
+
+The available types are represented by constants defined in the @code{gdb}
+module:
+
+@table @code
+@findex BP_BREAKPOINT
+@findex gdb.BP_BREAKPOINT
+@item BP_BREAKPOINT
+Normal code breakpoint.
+
+@findex BP_WATCHPOINT
+@findex gdb.BP_WATCHPOINT
+@item BP_WATCHPOINT
+Watchpoint breakpoint.
+
+@findex BP_HARDWARE_WATCHPOINT
+@findex gdb.BP_HARDWARE_WATCHPOINT
+@item BP_HARDWARE_WATCHPOINT
+Hardware assisted watchpoint.
+
+@findex BP_READ_WATCHPOINT
+@findex gdb.BP_READ_WATCHPOINT
+@item BP_READ_WATCHPOINT
+Hardware assisted read watchpoint.
+
+@findex BP_ACCESS_WATCHPOINT
+@findex gdb.BP_ACCESS_WATCHPOINT
+@item BP_ACCESS_WATCHPOINT
+Hardware assisted access watchpoint.
+@end table
+
+@defivar Breakpoint hit_count
+This attribute holds the hit count for the breakpoint, an integer.
+This attribute is writable, but currently it can only be set to zero.
+@end defivar
+
+@defivar Breakpoint location
+This attribute holds the location of the breakpoint, as specified by
+the user. It is a string. If the breakpoint does not have a location
+(that is, it is a watchpoint) the attribute's value is @code{None}. This
+attribute is not writable.
+@end defivar
+
+@defivar Breakpoint expression
+This attribute holds a breakpoint expression, as specified by
+the user. It is a string. If the breakpoint does not have an
+expression (the breakpoint is not a watchpoint) the attribute's value
+is @code{None}. This attribute is not writable.
+@end defivar
+
+@defivar Breakpoint condition
+This attribute holds the condition of the breakpoint, as specified by
+the user. It is a string. If there is no condition, this attribute's
+value is @code{None}. This attribute is writable.
+@end defivar
+
+@defivar Breakpoint commands
+This attribute holds the commands attached to the breakpoint. If
+there are commands, this attribute's value is a string holding all the
+commands, separated by newlines. If there are no commands, this
+attribute is @code{None}. This attribute is not writable.
+@end defivar
+
@node Lazy Strings In Python
@subsubsection Python representation of lazy strings.
the TUI mode. When @value{GDBN} is in the standard mode, most
of these commands will automatically switch to the TUI mode.
+Note that if @value{GDBN}'s @code{stdout} is not connected to a
+terminal, or @value{GDBN} has been started with the machine interface
+interpreter (@pxref{GDB/MI, ,The @sc{gdb/mi} Interface}), most of
+these commands will fail with an error, because it would not be
+possible or desirable to enable curses window management.
+
@table @code
@item info win
@kindex info win
@subsubheading Synopsis
@smallexample
- -break-insert [ -t ] [ -h ] [ -f ] [ -d ]
+ -break-insert [ -t ] [ -h ] [ -f ] [ -d ] [ -a ]
[ -c @var{condition} ] [ -i @var{ignore-count} ]
[ -p @var{thread} ] [ @var{location} ]
@end smallexample
cannot be parsed.
@item -d
Create a disabled breakpoint.
+@item -a
+Create a tracepoint. @xref{Tracepoints}. When this parameter
+is used together with @samp{-h}, a fast tracepoint is created.
@end table
@subsubheading Result
(gdb)
@end smallexample
+@subheading The @code{-break-passcount} Command
+@findex -break-passcount
+
+@subsubheading Synopsis
+
+@smallexample
+ -break-passcount @var{tracepoint-number} @var{passcount}
+@end smallexample
+
+Set the passcount for tracepoint @var{tracepoint-number} to
+@var{passcount}. If the breakpoint referred to by @var{tracepoint-number}
+is not a tracepoint, error is emitted. This corresponds to CLI
+command @samp{passcount}.
+
@subheading The @code{-break-watch} Command
@findex -break-watch
@node GDB/MI Tracepoint Commands
@section @sc{gdb/mi} Tracepoint Commands
-The tracepoint commands are not yet implemented.
+The commands defined in this section implement MI support for
+tracepoints. For detailed introduction, see @ref{Tracepoints}.
-@c @subheading -trace-actions
+@subheading The @code{-trace-find} Command
+@findex -trace-find
-@c @subheading -trace-delete
+@subsubheading Synopsis
-@c @subheading -trace-disable
+@smallexample
+ -trace-find @var{mode} [@var{parameters}@dots{}]
+@end smallexample
-@c @subheading -trace-dump
+Find a trace frame using criteria defined by @var{mode} and
+@var{parameters}. The following table lists permissible
+modes and their parameters. For details of operation, see @ref{tfind}.
-@c @subheading -trace-enable
+@table @samp
-@c @subheading -trace-exists
+@item none
+No parameters are required. Stops examining trace frames.
+
+@item frame-number
+An integer is required as parameter. Selects tracepoint frame with
+that index.
-@c @subheading -trace-find
+@item tracepoint-number
+An integer is required as parameter. Finds next
+trace frame that corresponds to tracepoint with the specified number.
+
+@item pc
+An address is required as parameter. Finds
+next trace frame that corresponds to any tracepoint at the specified
+address.
-@c @subheading -trace-frame-number
+@item pc-inside-range
+Two addresses are required as parameters. Finds next trace
+frame that corresponds to a tracepoint at an address inside the
+specified range. Both bounds are considered to be inside the range.
-@c @subheading -trace-info
+@item pc-outside-range
+Two addresses are required as parameters. Finds
+next trace frame that corresponds to a tracepoint at an address outside
+the specified range. Both bounds are considered to be inside the range.
-@c @subheading -trace-insert
+@item line
+Line specification is required as parameter. @xref{Specify Location}.
+Finds next trace frame that corresponds to a tracepoint at
+the specified location.
-@c @subheading -trace-list
+@end table
-@c @subheading -trace-pass-count
+If @samp{none} was passed as @var{mode}, the response does not
+have fields. Otherwise, the response may have the following fields:
-@c @subheading -trace-save
+@table @samp
+@item found
+This field has either @samp{0} or @samp{1} as the value, depending
+on whether a matching tracepoint was found.
-@c @subheading -trace-start
+@item traceframe
+The index of the found traceframe. This field is present iff
+the @samp{found} field has value of @samp{1}.
+
+@item tracepoint
+The index of the found tracepoint. This field is present iff
+the @samp{found} field has value of @samp{1}.
+
+@item frame
+The information about the frame corresponding to the found trace
+frame. This field is present only if a trace frame was found.
+@xref{GDB/MI Frame Information}, for description of this field.
+
+@end table
+
+@subsubheading @value{GDBN} Command
-@c @subheading -trace-stop
+The corresponding @value{GDBN} command is @samp{tfind}.
+
+@subheading -trace-define-variable
+@findex -trace-define-variable
+
+@subsubheading Synopsis
+
+@smallexample
+ -trace-define-variable @var{name} [ @var{value} ]
+@end smallexample
+
+Create trace variable @var{name} if it does not exist. If
+@var{value} is specified, sets the initial value of the specified
+trace variable to that value. Note that the @var{name} should start
+with the @samp{$} character.
+
+@subsubheading @value{GDBN} Command
+
+The corresponding @value{GDBN} command is @samp{tvariable}.
+
+@subheading -trace-list-variables
+@findex -trace-list-variables
+
+@subsubheading Synopsis
+
+@smallexample
+ -trace-list-variables
+@end smallexample
+
+Return a table of all defined trace variables. Each element of the
+table has the following fields:
+
+@table @samp
+@item name
+The name of the trace variable. This field is always present.
+
+@item initial
+The initial value. This is a 64-bit signed integer. This
+field is always present.
+
+@item current
+The value the trace variable has at the moment. This is a 64-bit
+signed integer. This field is absent iff current value is
+not defined, for example if the trace was never run, or is
+presently running.
+
+@end table
+
+@subsubheading @value{GDBN} Command
+
+The corresponding @value{GDBN} command is @samp{tvariables}.
+
+@subsubheading Example
+
+@smallexample
+(gdb)
+-trace-list-variables
+^done,trace-variables=@{nr_rows="1",nr_cols="3",
+hdr=[@{width="15",alignment="-1",col_name="name",colhdr="Name"@},
+ @{width="11",alignment="-1",col_name="initial",colhdr="Initial"@},
+ @{width="11",alignment="-1",col_name="current",colhdr="Current"@}],
+body=[variable=@{name="$trace_timestamp",initial="0"@}
+ variable=@{name="$foo",initial="10",current="15"@}]@}
+(gdb)
+@end smallexample
+
+@subheading -trace-save
+@findex -trace-save
+
+@subsubheading Synopsis
+
+@smallexample
+ -trace-save [-r ] @var{filename}
+@end smallexample
+
+Saves the collected trace data to @var{filename}. Without the
+@samp{-r} option, the data is downloaded from the target and saved
+in a local file. With the @samp{-r} option the target is asked
+to perform the save.
+
+@subsubheading @value{GDBN} Command
+
+The corresponding @value{GDBN} command is @samp{tsave}.
+
+
+@subheading -trace-start
+@findex -trace-start
+
+@subsubheading Synopsis
+
+@smallexample
+ -trace-start
+@end smallexample
+
+Starts a tracing experiments. The result of this command does not
+have any fields.
+
+@subsubheading @value{GDBN} Command
+
+The corresponding @value{GDBN} command is @samp{tstart}.
+
+@subheading -trace-status
+@findex -trace-status
+
+@subsubheading Synopsis
+
+@smallexample
+ -trace-status
+@end smallexample
+
+Obtains the status of a tracing experiment. The result may include
+the following fields:
+
+@table @samp
+
+@item supported
+May have a value of either @samp{0}, when no tracing operations are
+supported, @samp{1}, when all tracing operations are supported, or
+@samp{file} when examining trace file. In the latter case, examining
+of trace frame is possible but new tracing experiement cannot be
+started. This field is always present.
+
+@item running
+May have a value of either @samp{0} or @samp{1} depending on whether
+tracing experiement is in progress on target. This field is present
+if @samp{supported} field is not @samp{0}.
+
+@item stop-reason
+Report the reason why the tracing was stopped last time. This field
+may be absent iff tracing was never stopped on target yet. The
+value of @samp{request} means the tracing was stopped as result of
+the @code{-trace-stop} command. The value of @samp{overflow} means
+the tracing buffer is full. The value of @samp{disconnection} means
+tracing was automatically stopped when @value{GDBN} has disconnected.
+The value of @samp{passcount} means tracing was stopped when a
+tracepoint was passed a maximal number of times for that tracepoint.
+This field is present if @samp{supported} field is not @samp{0}.
+
+@item stopping-tracepoint
+The number of tracepoint whose passcount as exceeded. This field is
+present iff the @samp{stop-reason} field has the value of
+@samp{passcount}.
+
+@item frames
+@itemx frames-created
+The @samp{frames} field is a count of the total number of trace frames
+in the trace buffer, while @samp{frames-created} is the total created
+during the run, including ones that were discarded, such as when a
+circular trace buffer filled up. Both fields are optional.
+
+@item buffer-size
+@itemx buffer-free
+These fields tell the current size of the tracing buffer and the
+remaining space. These fields are optional.
+
+@item circular
+The value of the circular trace buffer flag. @code{1} means that the
+trace buffer is circular and old trace frames will be discarded if
+necessary to make room, @code{0} means that the trace buffer is linear
+and may fill up.
+
+@item disconnected
+The value of the disconnected tracing flag. @code{1} means that
+tracing will continue after @value{GDBN} disconnects, @code{0} means
+that the trace run will stop.
+
+@end table
+
+@subsubheading @value{GDBN} Command
+
+The corresponding @value{GDBN} command is @samp{tstatus}.
+
+@subheading -trace-stop
+@findex -trace-stop
+
+@subsubheading Synopsis
+
+@smallexample
+ -trace-stop
+@end smallexample
+
+Stops a tracing experiment. The result of this command has the same
+fields as @code{-trace-status}, except that the @samp{supported} and
+@samp{running} fields are not output.
+
+@subsubheading @value{GDBN} Command
+
+The corresponding @value{GDBN} command is @samp{tstop}.
@c %%%%%%%%%%%%%%%%%%%%%%%%%%%% SECTION %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
The command @code{maint print raw-registers} includes the contents of
the raw register cache; the command @code{maint print cooked-registers}
-includes the (cooked) value of all registers; and the command
-@code{maint print register-groups} includes the groups that each
+includes the (cooked) value of all registers, including registers which
+aren't available on the target nor visible to user; and the
+command @code{maint print register-groups} includes the groups that each
register is a member of. @xref{Registers,, Registers, gdbint,
@value{GDBN} Internals}.
extensions unless the stub also reports that it supports them by
including @samp{multiprocess+} in its @samp{qSupported} reply.
@xref{multiprocess extensions}, for details.
+
+@item xmlRegisters
+This feature indicates that @value{GDBN} supports the XML target
+description. If the stub sees @samp{xmlRegisters=} with target
+specific strings separated by a comma, it will report register
+description.
@end table
Stubs should ignore any unknown values for
@tab @samp{-}
@tab No
+@item @samp{TracepointSource}
+@tab No
+@tab @samp{-}
+@tab No
+
@end multitable
These are the currently defined stub features, in more detail:
The remote stub accepts and implements the reverse step packet
(@pxref{bs}).
+@item TracepointSource
+The remote stub understands the @samp{QTDPsrc} packet that supplies
+the source form of tracepoint definitions.
+
@end table
@item qSymbol::
@end table
@item qTBuffer
+@item QTBuffer
@item QTDisconnected
@itemx QTDP
+@itemx QTDPsrc
@itemx QTDV
@itemx qTfP
@itemx qTfV
The packet was not recognized.
@end table
+@item QTDPsrc:@var{n}:@var{addr}:@var{type}:@var{start}:@var{slen}:@var{bytes}
+@cindex @samp{QTDPsrc} packet
+Specify a source string of tracepoint @var{n} at address @var{addr}.
+This is useful to get accurate reproduction of the tracepoints
+originally downloaded at the beginning of the trace run. @var{type}
+is the name of the tracepoint part, such as @samp{cond} for the
+tracepoint's conditional expression (see below for a list of types), while
+@var{bytes} is the string, encoded in hexadecimal.
+
+@var{start} is the offset of the @var{bytes} within the overall source
+string, while @var{slen} is the total length of the source string.
+This is intended for handling source strings that are longer than will
+fit in a single packet.
+@c Add detailed example when this info is moved into a dedicated
+@c tracepoint descriptions section.
+
+The available string types are @samp{at} for the location,
+@samp{cond} for the conditional, and @samp{cmd} for an action command.
+@value{GDBN} sends a separate packet for each command in the action
+list, in the same order in which the commands are stored in the list.
+
+The target does not need to do anything with source strings except
+report them back as part of the replies to the @samp{qTfP}/@samp{qTsP}
+query packets.
+
+Although this packet is optional, and @value{GDBN} will only send it
+if the target replies with @samp{TracepointSource} @xref{General
+Query Packets}, it makes both disconnected tracing and trace files
+much easier to use. Otherwise the user must be careful that the
+tracepoints in effect while looking at trace frames are identical to
+the ones in effect during the trace run; even a small discrepancy
+could cause @samp{tdump} not to work, or a particular trace frame not
+be found.
+
@item QTDV:@var{n}:@var{value}
@cindex define trace state variable, remote request
@cindex @samp{QTDV} packet
@item qTStatus
Ask the stub if there is a trace experiment running right now.
-Replies:
+The reply has the form:
+
+@table @samp
+
+@item T@var{running}@r{[};@var{field}@r{]}@dots{}
+@var{running} is a single digit @code{1} if the trace is presently
+running, or @code{0} if not. It is followed by semicolon-separated
+optional fields that an agent may use to report additional status.
+
+@end table
+
+If the trace is not running, the agent may report any of several
+explanations as one of the optional fields:
+
@table @samp
-@item T0
-There is no trace experiment running.
-@item T1
-There is a trace experiment running.
+
+@item tnotrun:0
+No trace has been run yet.
+
+@item tstop:0
+The trace was stopped by a user-originated stop command.
+
+@item tfull:0
+The trace stopped because the trace buffer filled up.
+
+@item tdisconnected:0
+The trace stopped because @value{GDBN} disconnected from the target.
+
+@item tpasscount:@var{tpnum}
+The trace stopped because tracepoint @var{tpnum} exceeded its pass count.
+
+@item terror:@var{text}:@var{tpnum}
+The trace stopped because tracepoint @var{tpnum} had an error. The
+string @var{text} is available to describe the nature of the error
+(for instance, a divide by zero in the condition expression).
+@var{text} is hex encoded.
+
+@item tunknown:0
+The trace stopped for some other reason.
+
+@end table
+
+Additional optional fields supply statistical and other information.
+Although not required, they are extremely useful for users monitoring
+the progress of a trace run. If a trace has stopped, and these
+numbers are reported, they must reflect the state of the just-stopped
+trace.
+
+@table @samp
+
+@item tframes:@var{n}
+The number of trace frames in the buffer.
+
+@item tcreated:@var{n}
+The total number of trace frames created during the run. This may
+be larger than the trace frame count, if the buffer is circular.
+
+@item tsize:@var{n}
+The total size of the trace buffer, in bytes.
+
+@item tfree:@var{n}
+The number of bytes still unused in the buffer.
+
+@item circular:@var{n}
+The value of the circular trace buffer flag. @code{1} means that the
+trace buffer is circular and old trace frames will be discarded if
+necessary to make room, @code{0} means that the trace buffer is linear
+and may fill up.
+
+@item disconn:@var{n}
+The value of the disconnected tracing flag. @code{1} means that
+tracing will continue after @value{GDBN} disconnects, @code{0} means
+that the trace run will stop.
+
@end table
@item qTV:@var{var}
A reply consisting of just @code{l} indicates that no bytes are
available.
+@item QTBuffer:circular:@var{value}
+This packet directs the target to use a circular trace buffer if
+@var{value} is 1, or a linear buffer if the value is 0.
+
@end table
@node Host I/O Packets
The register sets may be different, depending on the target.
-The @samp{org.gnu.gdb.i386.sse} feature is required. It should
+The @samp{org.gnu.gdb.i386.sse} feature is optional. It should
describe registers:
@itemize @minus
@samp{mxcsr}
@end itemize
+The @samp{org.gnu.gdb.i386.avx} feature is optional and requires the
+@samp{org.gnu.gdb.i386.sse} feature. It should
+describe the upper 128 bits of @sc{ymm} registers:
+
+@itemize @minus
+@item
+@samp{ymm0h} through @samp{ymm7h} for i386
+@item
+@samp{ymm0h} through @samp{ymm15h} for amd64
+@item
+@end itemize
+
The @samp{org.gnu.gdb.i386.linux} feature is optional. It should
describe a single register, @samp{orig_eax}.