\input texinfo @c -*-texinfo-*-
@c Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998,
-@c 1999, 2000, 2001, 2002, 2003, 2004, 2005
+@c 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
@c Free Software Foundation, Inc.
@c
@c %**start of header
Version @value{GDBVN}.
Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998,@*
- 1999, 2000, 2001, 2002, 2003, 2004, 2005@*
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006@*
Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
@vskip 0pt plus 1filll
Copyright @copyright{} 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
-1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2006
Free Software Foundation, Inc.
@sp 2
Published by the Free Software Foundation @*
This is the @value{EDITION} Edition, for @value{GDBN} Version
@value{GDBVN}.
-Copyright (C) 1988-2005 Free Software Foundation, Inc.
+Copyright (C) 1988-2006 Free Software Foundation, Inc.
@menu
* Summary:: Summary of @value{GDBN}
Thorpe, Corinna Vinschen, Ulrich Weigand, and Elena Zannoni, helped
with the migration of old architectures to this new framework.
+Andrew Cagney completely re-designed and re-implemented @value{GDBN}'s
+unwinder framework, this consisting of a fresh new design featuring
+frame IDs, independent frame sniffers, and the sentinel frame. Mark
+Kettenis implemented the @sc{dwarf 2} unwinder, Jeff Johnston the
+libunwind unwinder, and Andrew Cagney the dummy, sentinel, tramp, and
+trad unwinders. The architecture specific changes, each involving a
+complete rewrite of the architecture's frame code, were carried out by
+Jim Blandy, Joel Brobecker, Kevin Buettner, Andrew Cagney, Stephane
+Carrez, Randolph Chung, Orjan Friberg, Richard Henderson, Daniel
+Jacobowitz, Jeff Johnston, Mark Kettenis, Theodore A. Roth, Kei
+Sakamoto, Yoshinori Sato, Michael Snyder, Corinna Vinschen, and Ulrich
+Weigand.
+
@node Sample Session
@chapter A Sample @value{GDBN} Session
that---@file{/mnt/cross/foo.c}.
Note that the executable search path is @emph{not} used to locate the
-source files. Neither is the current working directory, unless it
-happens to be in the source path.
+source files.
Whenever you reset or rearrange the source path, @value{GDBN} clears out
any information it has cached about where source files are found and where
directory at the time you add an entry to the source path.
@item directory
-Reset the source path to empty again. This requires confirmation.
+Reset the source path to its default value (@samp{$cdir:$cwd} on Unix systems). This requires confirmation.
@c RET-repeat for @code{directory} is explicitly disabled, but since
@c repeating it would be a no-op we do not say that. (thanks to RMS)
@enumerate
@item
-Use @code{directory} with no argument to reset the source path to empty.
+Use @code{directory} with no argument to reset the source path to its default value.
@item
Use @code{directory} with suitable arguments to reinstall the
it to find out the name of a variable or a function given its address.
@kindex whatis
-@item whatis @var{expr}
-Print the data type of expression @var{expr}. @var{expr} is not
-actually evaluated, and any side-effecting operations (such as
-assignments or function calls) inside it do not take place.
+@item whatis [@var{arg}]
+Print the data type of @var{arg}, which can be either an expression or
+a data type. With no argument, print the data type of @code{$}, the
+last value in the value history. If @var{arg} is an expression, it is
+not actually evaluated, and any side-effecting operations (such as
+assignments or function calls) inside it do not take place. If
+@var{arg} is a type name, it may be the name of a type or typedef, or
+for C code it may have the form @samp{class @var{class-name}},
+@samp{struct @var{struct-tag}}, @samp{union @var{union-tag}} or
+@samp{enum @var{enum-tag}}.
@xref{Expressions, ,Expressions}.
-@item whatis
-Print the data type of @code{$}, the last value in the value history.
-
@kindex ptype
-@item ptype @var{typename}
-Print a description of data type @var{typename}. @var{typename} may be
-the name of a type, or for C code it may have the form @samp{class
-@var{class-name}}, @samp{struct @var{struct-tag}}, @samp{union
-@var{union-tag}} or @samp{enum @var{enum-tag}}.
-
-@item ptype @var{expr}
-@itemx ptype
-Print a description of the type of expression @var{expr}. @code{ptype}
-differs from @code{whatis} by printing a detailed description, instead
-of just the name of the type.
+@item ptype [@var{arg}]
+@code{ptype} accepts the same arguments as @code{whatis}, but prints a
+detailed description of the type, instead of just the name of the type.
+@xref{Expressions, ,Expressions}.
For example, for this variable declaration:
@code{symbol-file} with no argument clears out @value{GDBN} information on your
program's symbol table.
-The @code{symbol-file} command causes @value{GDBN} to forget the contents
-of its convenience variables, the value history, and all breakpoints and
-auto-display expressions. This is because they may contain pointers to
-the internal data recording symbols and data types, which are part of
-the old symbol table data being discarded inside @value{GDBN}.
+The @code{symbol-file} command causes @value{GDBN} to forget the contents of
+some breakpoints and auto-display expressions. This is because they may
+contain pointers to the internal data recording symbols and data types,
+which are part of the old symbol table data being discarded inside
+@value{GDBN}.
@code{symbol-file} does not repeat if you press @key{RET} again after
executing it once.
A core dump file. @samp{target core @var{filename}} is the same as
@samp{core-file @var{filename}}.
-@item target remote @var{dev}
+@item target remote @var{medium}
@cindex remote target
-Remote serial target in GDB-specific protocol. The argument @var{dev}
-specifies what serial device to use for the connection (e.g.@:
-@file{/dev/ttya}). @xref{Remote, ,Remote debugging}. @code{target remote}
-supports the @code{load} command. This is only useful if you have
-some other way of getting the stub to the target system, and you can put
-it somewhere in memory where it won't get clobbered by the download.
+A remote system connected to @value{GDBN} via a serial line or network
+connection. This command tells @value{GDBN} to use its own remote
+protocol over @var{medium} for debugging. @xref{Remote Debugging}.
+
+For example, if you have a board connected to @file{/dev/ttya} on the
+machine running @value{GDBN}, you could say:
+
+@smallexample
+target remote /dev/ttya
+@end smallexample
+
+@code{target remote} supports the @code{load} command. This is only
+useful if you have some other way of getting the stub to the target
+system, and you can put it somewhere in memory where it won't get
+clobbered by the download.
@item target sim
@cindex built-in simulator target
@menu
* Connecting:: Connecting to a remote target
* Server:: Using the gdbserver program
-* NetWare:: Using the gdbserve.nlm program
* Remote configuration:: Remote configuration
* remote stub:: Implementing a remote stub
@end menu
Start up @value{GDBN} as usual, using the name of the local copy of your
program as the first argument.
+@cindex @code{target remote}
+@value{GDBN} can communicate with the target over a serial line, or
+over an @acronym{IP} network using @acronym{TCP} or @acronym{UDP}. In
+each case, @value{GDBN} uses the same protocol for debugging your
+program; only the medium carrying the debugging packets varies. The
+@code{target remote} command establishes a connection to the target.
+Its arguments indicate which medium to use:
+
+@table @code
+
+@item target remote @var{serial-device}
@cindex serial line, @code{target remote}
+Use @var{serial-device} to communicate with the target. For example,
+to use a serial line connected to the device named @file{/dev/ttyb}:
+
+@smallexample
+target remote /dev/ttyb
+@end smallexample
+
If you're using a serial line, you may want to give @value{GDBN} the
@w{@samp{--baud}} option, or use the @code{set remotebaud} command
(@pxref{Remote configuration, set remotebaud}) before the
@code{target} command.
-After that, use @code{target remote} to establish communications with
-the target machine. Its argument specifies how to communicate---either
-via a devicename attached to a direct serial line, or a TCP or UDP port
-(possibly to a terminal server which in turn has a serial line to the
-target). For example, to use a serial line connected to the device
-named @file{/dev/ttyb}:
-
-@smallexample
-target remote /dev/ttyb
-@end smallexample
+@item target remote @code{@var{host}:@var{port}}
+@itemx target remote @code{tcp:@var{host}:@var{port}}
+@cindex @acronym{TCP} port, @code{target remote}
+Debug using a @acronym{TCP} connection to @var{port} on @var{host}.
+The @var{host} may be either a host name or a numeric @acronym{IP}
+address; @var{port} must be a decimal number. The @var{host} could be
+the target machine itself, if it is directly connected to the net, or
+it might be a terminal server which in turn has a serial line to the
+target.
-@cindex TCP port, @code{target remote}
-To use a TCP connection, use an argument of the form
-@code{@var{host}:@var{port}} or @code{tcp:@var{host}:@var{port}}.
-For example, to connect to port 2828 on a
-terminal server named @code{manyfarms}:
+For example, to connect to port 2828 on a terminal server named
+@code{manyfarms}:
@smallexample
target remote manyfarms:2828
@end smallexample
-If your remote target is actually running on the same machine as
-your debugger session (e.g.@: a simulator of your target running on
-the same host), you can omit the hostname. For example, to connect
-to port 1234 on your local machine:
+If your remote target is actually running on the same machine as your
+debugger session (e.g.@: a simulator for your target running on the
+same host), you can omit the hostname. For example, to connect to
+port 1234 on your local machine:
@smallexample
target remote :1234
Note that the colon is still required here.
-@cindex UDP port, @code{target remote}
-To use a UDP connection, use an argument of the form
-@code{udp:@var{host}:@var{port}}. For example, to connect to UDP port 2828
-on a terminal server named @code{manyfarms}:
+@item target remote @code{udp:@var{host}:@var{port}}
+@cindex @acronym{UDP} port, @code{target remote}
+Debug using @acronym{UDP} packets to @var{port} on @var{host}. For example, to
+connect to @acronym{UDP} port 2828 on a terminal server named @code{manyfarms}:
@smallexample
target remote udp:manyfarms:2828
@end smallexample
-When using a UDP connection for remote debugging, you should keep in mind
-that the `U' stands for ``Unreliable''. UDP can silently drop packets on
-busy or unreliable networks, which will cause havoc with your debugging
-session.
+When using a @acronym{UDP} connection for remote debugging, you should
+keep in mind that the `U' stands for ``Unreliable''. @acronym{UDP}
+can silently drop packets on busy or unreliable networks, which will
+cause havoc with your debugging session.
-Now you can use all the usual commands to examine and change data and to
-step and continue the remote program.
+@item target remote | @var{command}
+@cindex pipe, @code{target remote} to
+Run @var{command} in the background and communicate with it using a
+pipe. The @var{command} is a shell command, to be parsed and expanded
+by the system's command shell, @code{/bin/sh}; it should expect remote
+protocol packets on its standard input, and send replies on its
+standard output. You could use this to run a stand-alone simulator
+that speaks the remote debugging protocol, to make net connections
+using programs like @code{ssh}, or for other similar tricks.
+
+If @var{command} closes its standard output (perhaps by exiting),
+@value{GDBN} will try to send it a @code{SIGTERM} signal. (If the
+program has already exited, this will have no effect.)
+
+@end table
+
+Once the connection has been established, you can use all the usual
+commands to examine and change data and to step and continue the
+remote program.
@cindex interrupting remote programs
@cindex remote programs, interrupting
@end table
-@node NetWare
-@section Using the @code{gdbserve.nlm} program
-
-@kindex gdbserve.nlm
-@code{gdbserve.nlm} is a control program for NetWare systems, which
-allows you to connect your program with a remote @value{GDBN} via
-@code{target remote}.
-
-@value{GDBN} and @code{gdbserve.nlm} communicate via a serial line,
-using the standard @value{GDBN} remote serial protocol.
-
-@table @emph
-@item On the target machine,
-you need to have a copy of the program you want to debug.
-@code{gdbserve.nlm} does not need your program's symbol table, so you
-can strip the program if necessary to save space. @value{GDBN} on the
-host system does all the symbol handling.
-
-To use the server, you must tell it how to communicate with
-@value{GDBN}; the name of your program; and the arguments for your
-program. The syntax is:
-
-@smallexample
-load gdbserve [ BOARD=@var{board} ] [ PORT=@var{port} ]
- [ BAUD=@var{baud} ] @var{program} [ @var{args} @dots{} ]
-@end smallexample
-
-@var{board} and @var{port} specify the serial line; @var{baud} specifies
-the baud rate used by the connection. @var{port} and @var{node} default
-to 0, @var{baud} defaults to 9600@dmn{bps}.
-
-For example, to debug Emacs with the argument @samp{foo.txt}and
-communicate with @value{GDBN} over serial port number 2 or board 1
-using a 19200@dmn{bps} connection:
-
-@smallexample
-load gdbserve BOARD=1 PORT=2 BAUD=19200 emacs foo.txt
-@end smallexample
-
-@item
-On the @value{GDBN} host machine, connect to your target (@pxref{Connecting,,
-Connecting to a remote target}).
-
-@end table
-
@node Remote configuration
@section Remote configuration
@kindex set debugevents
@item set debugevents
-This boolean value adds debug output concerning events seen by the debugger.
+This boolean value adds debug output concerning kernel events related
+to the debuggee seen by the debugger. This includes events that
+signal thread and process creation and exit, DLL loading and
+unloading, console interrupts, and debugging messages produced by the
+Windows @code{OutputDebugString} API call.
@kindex set debugexec
@item set debugexec
This boolean value adds debug output concerning execute events
-seen by the debugger.
+(such as resume thread) seen by the debugger.
@kindex set debugexceptions
@item set debugexceptions
-This boolean value adds debug ouptut concerning exception events
-seen by the debugger.
+This boolean value adds debug output concerning exceptions in the
+debuggee seen by the debugger.
@kindex set debugmemory
@item set debugmemory
-This boolean value adds debug ouptut concerning memory events
-seen by the debugger.
+This boolean value adds debug output concerning debuggee memory reads
+and writes by the debugger.
@kindex set shell
@item set shell
@smallexample
(@value{GDBP})
-break-insert main
-^done,bkpt=@{number="1",addr="0x000100d0",file="hello.c",line="5"@}
+^done,bkpt=@{number="1",addr="0x000100d0",file="hello.c",
+fullname="/home/foo/hello.c",line="5",times="0"@}
(@value{GDBP})
-break-after 1 3
~
@{width="10",alignment="-1",col_name="addr",colhdr="Address"@},
@{width="40",alignment="2",col_name="what",colhdr="What"@}],
body=[bkpt=@{number="1",type="breakpoint",disp="keep",enabled="y",
-addr="0x000100d0",func="main",file="hello.c",line="5",times="0",
-ignore="3"@}]@}
+addr="0x000100d0",func="main",file="hello.c",fullname="/home/foo/hello.c",
+line="5",times="0",ignore="3"@}]@}
(@value{GDBP})
@end smallexample
@{width="10",alignment="-1",col_name="addr",colhdr="Address"@},
@{width="40",alignment="2",col_name="what",colhdr="What"@}],
body=[bkpt=@{number="1",type="breakpoint",disp="keep",enabled="y",
-addr="0x000100d0",func="main",file="hello.c",line="5",cond="1",
-times="0",ignore="3"@}]@}
+addr="0x000100d0",func="main",file="hello.c",fullname="/home/foo/hello.c",
+line="5",cond="1",times="0",ignore="3"@}]@}
(@value{GDBP})
@end smallexample
@{width="10",alignment="-1",col_name="addr",colhdr="Address"@},
@{width="40",alignment="2",col_name="what",colhdr="What"@}],
body=[bkpt=@{number="2",type="breakpoint",disp="keep",enabled="n",
-addr="0x000100d0",func="main",file="hello.c",line="5",times="0"@}]@}
+addr="0x000100d0",func="main",file="hello.c",fullname="/home/foo/hello.c",
+line="5",times="0"@}]@}
(@value{GDBP})
@end smallexample
@{width="10",alignment="-1",col_name="addr",colhdr="Address"@},
@{width="40",alignment="2",col_name="what",colhdr="What"@}],
body=[bkpt=@{number="2",type="breakpoint",disp="keep",enabled="y",
-addr="0x000100d0",func="main",file="hello.c",line="5",times="0"@}]@}
+addr="0x000100d0",func="main",file="hello.c",fullname="/home/foo/hello.c",
+line="5",times="0"@}]@}
(@value{GDBP})
@end smallexample
@table @samp
@item -t
-Insert a tempoary breakpoint.
+Insert a temporary breakpoint.
@item -h
Insert a hardware breakpoint.
@item -c @var{condition}
The result is in the form:
@smallexample
- ^done,bkptno="@var{number}",func="@var{funcname}",
- file="@var{filename}",line="@var{lineno}"
+^done,bkpt=@{number="@var{number}",type="@var{type}",disp="del"|"keep",
+enabled="y"|"n",addr="@var{hex}",func="@var{funcname}",file="@var{filename}",
+fullname="@var{full_filename}",line="@var{lineno}",times="@var{times}"@}
@end smallexample
@noindent
-where @var{number} is the @value{GDBN} number for this breakpoint, @var{funcname}
-is the name of the function where the breakpoint was inserted,
-@var{filename} is the name of the source file which contains this
-function, and @var{lineno} is the source line number within that file.
+where @var{number} is the @value{GDBN} number for this breakpoint,
+@var{funcname} is the name of the function where the breakpoint was
+inserted, @var{filename} is the name of the source file which contains
+this function, @var{lineno} is the source line number within that file
+and @var{times} the number of times that the breakpoint has been hit
+(always 0 for -break-insert but may be greater for -break-info or -break-list
+which use the same output).
Note: this format is open to change.
@c An out-of-band breakpoint instead of part of the result?
@smallexample
(@value{GDBP})
-break-insert main
-^done,bkpt=@{number="1",addr="0x0001072c",file="recursive2.c",line="4"@}
+^done,bkpt=@{number="1",addr="0x0001072c",file="recursive2.c",
+fullname="/home/foo/recursive2.c,line="4",times="0"@}
(@value{GDBP})
-break-insert -t foo
-^done,bkpt=@{number="2",addr="0x00010774",file="recursive2.c",line="11"@}
+^done,bkpt=@{number="2",addr="0x00010774",file="recursive2.c",
+fullname="/home/foo/recursive2.c,line="11",times="0"@}
(@value{GDBP})
-break-list
^done,BreakpointTable=@{nr_rows="2",nr_cols="6",
@{width="10",alignment="-1",col_name="addr",colhdr="Address"@},
@{width="40",alignment="2",col_name="what",colhdr="What"@}],
body=[bkpt=@{number="1",type="breakpoint",disp="keep",enabled="y",
-addr="0x0001072c", func="main",file="recursive2.c",line="4",times="0"@},
+addr="0x0001072c", func="main",file="recursive2.c",
+fullname="/home/foo/recursive2.c,"line="4",times="0"@},
bkpt=@{number="2",type="breakpoint",disp="del",enabled="y",
-addr="0x00010774",func="foo",file="recursive2.c",line="11",times="0"@}]@}
+addr="0x00010774",func="foo",file="recursive2.c",
+fullname="/home/foo/recursive2.c",line="11",times="0"@}]@}
(@value{GDBP})
-break-insert -r foo.*
~int foo(int, int);
-^done,bkpt=@{number="3",addr="0x00010774",file="recursive2.c",line="11"@}
+^done,bkpt=@{number="3",addr="0x00010774",file="recursive2.c,
+"fullname="/home/foo/recursive2.c",line="11",times="0"@}
(@value{GDBP})
@end smallexample
body=[bkpt=@{number="1",type="breakpoint",disp="keep",enabled="y",
addr="0x000100d0",func="main",file="hello.c",line="5",times="0"@},
bkpt=@{number="2",type="breakpoint",disp="keep",enabled="y",
-addr="0x00010114",func="foo",file="hello.c",line="13",times="0"@}]@}
+addr="0x00010114",func="foo",file="hello.c",fullname="/home/foo/hello.c",
+line="13",times="0"@}]@}
(@value{GDBP})
@end smallexample
^done,reason="watchpoint-trigger",wpt=@{number="2",exp="x"@},
value=@{old="-268439212",new="55"@},
frame=@{func="main",args=[],file="recursive2.c",
-fullname="/home/foo/bar/devo/myproject/recursive2.c",line="5"@}
+fullname="/home/foo/bar/recursive2.c",line="5"@}
(@value{GDBP})
@end smallexample
@{width="40",alignment="2",col_name="what",colhdr="What"@}],
body=[bkpt=@{number="1",type="breakpoint",disp="keep",enabled="y",
addr="0x00010734",func="callee4",
-file="../../../devo/gdb/testsuite/gdb.mi/basics.c",line="8",times="1"@},
+file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
+fullname="/home/foo/devo/gdb/testsuite/gdb.mi/basics.c"line="8",times="1"@},
bkpt=@{number="2",type="watchpoint",disp="keep",
enabled="y",addr="",what="C",times="0"@}]@}
(@value{GDBP})
@{width="40",alignment="2",col_name="what",colhdr="What"@}],
body=[bkpt=@{number="1",type="breakpoint",disp="keep",enabled="y",
addr="0x00010734",func="callee4",
-file="../../../devo/gdb/testsuite/gdb.mi/basics.c",line="8",times="1"@},
+file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
+fullname="/home/foo/devo/gdb/testsuite/gdb.mi/basics.c",line="8",times="1"@},
bkpt=@{number="2",type="watchpoint",disp="keep",
enabled="y",addr="",what="C",times="-5"@}]@}
(@value{GDBP})
@{width="40",alignment="2",col_name="what",colhdr="What"@}],
body=[bkpt=@{number="1",type="breakpoint",disp="keep",enabled="y",
addr="0x00010734",func="callee4",
-file="../../../devo/gdb/testsuite/gdb.mi/basics.c",line="8",times="1"@}]@}
+file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
+fullname="/home/foo/devo/gdb/testsuite/gdb.mi/basics.c",line="8",
+times="1"@}]@}
(@value{GDBP})
@end smallexample
(@value{GDBP})
*stopped,reason="breakpoint-hit",bkptno="1",frame=@{func="main",
-args=[],file="try.c",fullname="/home/foo/bar/devo/myproject/try.c",line="5"@}
+args=[],file="try.c",fullname="/home/foo/bar/try.c",line="5"@}
(@value{GDBP})
-data-list-changed-registers
^done,changed-registers=["0","1","2","4","5","6","7","8","9",
(@value{GDBP})
@@Hello world
*stopped,reason="breakpoint-hit",bkptno="2",frame=@{func="foo",args=[],
-file="hello.c",fullname="/home/foo/bar/devo/myproject/hello.c",line="13"@}
+file="hello.c",fullname="/home/foo/bar/hello.c",line="13"@}
(@value{GDBP})
@end smallexample
(@value{GDBP})
@@hello from foo
*stopped,reason="function-finished",frame=@{func="main",args=[],
-file="hello.c",fullname="/home/foo/bar/devo/myproject/hello.c",line="7"@}
+file="hello.c",fullname="/home/foo/bar/hello.c",line="7"@}
(@value{GDBP})
@end smallexample
(@value{GDBP})
*stopped,reason="function-finished",frame=@{addr="0x000107b0",func="foo",
args=[@{name="a",value="1"],@{name="b",value="9"@}@},
-file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@},
+file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
gdb-result-var="$1",return-value="0"
(@value{GDBP})
@end smallexample
(@value{GDBP})
111*stopped,signal-name="SIGINT",signal-meaning="Interrupt",
frame=@{addr="0x00010140",func="foo",args=[],file="try.c",
-fullname="/home/foo/bar/devo/myproject/try.c",line="13"@}
+fullname="/home/foo/bar/try.c",line="13"@}
(@value{GDBP})
(@value{GDBP})
(@value{GDBP})
*stopped,reason="breakpoint-hit",bkptno="1",
frame=@{func="main",args=[],file="recursive2.c",
-fullname="/home/foo/bar/devo/myproject/recursive2.c",line="4"@}
+fullname="/home/foo/bar/recursive2.c",line="4"@}
(@value{GDBP})
@end smallexample
*stopped,reason="end-stepping-range",
frame=@{func="foo",args=[@{name="a",value="10"@},
@{name="b",value="0"@}],file="recursive2.c",
-fullname="/home/foo/bar/devo/myproject/recursive2.c",line="11"@}
+fullname="/home/foo/bar/recursive2.c",line="11"@}
(@value{GDBP})
@end smallexample
(@value{GDBP})
*stopped,reason="end-stepping-range",
frame=@{func="foo",args=[],file="try.c",
-fullname="/home/foo/bar/devo/myproject/try.c",line="10"@}
+fullname="/home/foo/bar/try.c",line="10"@}
(@value{GDBP})
-exec-step-instruction
^running
(@value{GDBP})
*stopped,reason="end-stepping-range",
frame=@{addr="0x000100f4",func="foo",args=[],file="try.c",
-fullname="/home/foo/bar/devo/myproject/try.c",line="10"@}
+fullname="/home/foo/bar/try.c",line="10"@}
(@value{GDBP})
@end smallexample
(@value{GDBP})
x = 55
*stopped,reason="location-reached",frame=@{func="main",args=[],
-file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="6"@}
+file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="6"@}
(@value{GDBP})
@end smallexample
-stack-list-frames
^done,stack=
[frame=@{level="0",addr="0x0001076c",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="11"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="11"@},
frame=@{level="1",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
frame=@{level="2",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
frame=@{level="3",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
frame=@{level="4",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
frame=@{level="5",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
frame=@{level="6",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
frame=@{level="7",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
frame=@{level="8",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
frame=@{level="9",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
frame=@{level="10",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
frame=@{level="11",addr="0x00010738",func="main",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="4"@}]
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="4"@}]
(@value{GDBP})
@end smallexample
-stack-list-frames 3 5
^done,stack=
[frame=@{level="3",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
frame=@{level="4",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@},
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@},
frame=@{level="5",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@}]
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@}]
(@value{GDBP})
@end smallexample
-stack-list-frames 3 3
^done,stack=
[frame=@{level="3",addr="0x000107a4",func="foo",
- file="recursive2.c",fullname="/home/foo/bar/devo/myproject/recursive2.c",line="14"@}]
+ file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14"@}]
(@value{GDBP})
@end smallexample
The error response returned for some packets includes a two character
error number. That number is not well defined.
+@cindex empty response, for unsupported packets
For any @var{command} not supported by the stub, an empty response
(@samp{$#00}) should be returned. That way it is possible to extend the
protocol. A newer @value{GDBN} can tell if a packet is supported based
Don't use this packet. Use the @samp{Z} and @samp{z} packets instead
(@pxref{insert breakpoint or watchpoint packet}).
-@item c @var{addr}
+@item c @r{[}@var{addr}@r{]}
@cindex @samp{c} packet
Continue. @var{addr} is address to resume. If @var{addr} is omitted,
resume at current address.
Reply:
@xref{Stop Reply Packets}, for the reply specifications.
-@item C @var{sig};@var{addr}
+@item C @var{sig}@r{[};@var{addr}@r{]}
@cindex @samp{C} packet
Continue with signal @var{sig} (hex signal number). If
@samp{;@var{addr}} is omitted, resume at same address.
The @samp{R} packet has no reply.
-@item s @var{addr}
+@item s @r{[}@var{addr}@r{]}
@cindex @samp{s} packet
Single step. @var{addr} is the address at which to resume. If
@var{addr} is omitted, resume at same address.
Reply:
@xref{Stop Reply Packets}, for the reply specifications.
-@item S @var{sig};@var{addr}
+@item S @var{sig}@r{[};@var{addr}@r{]}
@anchor{step with signal packet}
@cindex @samp{S} packet
Step with signal. This is analogous to the @samp{C} packet, but
projects / deliverable / binutils-gdb.git / blobdiff