* Gdb-Internals: (gdbint). The GNU debugger's internals.
@end direntry
-@ifinfo
-This file documents the internals of the GNU debugger @value{GDBN}.
-Copyright (C) 1990, 1991, 1992, 1993, 1994, 1996, 1998, 1999, 2000, 2001,
- 2002, 2003, 2004, 2005, 2006
- Free Software Foundation, Inc.
+@copying
+Copyright @copyright{} 1990, 1991, 1992, 1993, 1994, 1996, 1998, 1999,
+2000, 2001, 2002, 2003, 2004, 2005, 2006, 2008, 2009
+Free Software Foundation, Inc.
Contributed by Cygnus Solutions. Written by John Gilmore.
Second Edition by Stan Shebs.
Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
Texts. A copy of the license is included in the section entitled ``GNU
Free Documentation License''.
-@end ifinfo
+@end copying
+
+@ifnottex
+This file documents the internals of the GNU debugger @value{GDBN}.
+
+@insertcopying
+@end ifnottex
@setchapternewpage off
@settitle @value{GDBN} Internals
@end tex
@vskip 0pt plus 1filll
-Copyright @copyright{} 1990,1991,1992,1993,1994,1996,1998,1999,2000,2001,
- 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
-Texts. A copy of the license is included in the section entitled ``GNU
-Free Documentation License''.
+@insertcopying
@end titlepage
@contents
* Algorithms::
* User Interface::
* libgdb::
+* Values::
+* Stack Frames::
* Symbol Handling::
* Language Support::
* Host Definition::
* Target Architecture Definition::
+* Target Descriptions::
* Target Vector Definition::
* Native Debugging::
* Support Libraries::
executes. In most cases they are the same machine, in which case a
third type of @dfn{Native} attributes come into play.
-Defines and include files needed to build on the host are host support.
-Examples are tty support, system defined types, host byte order, host
-float format.
+Defines and include files needed to build on the host are host
+support. Examples are tty support, system defined types, host byte
+order, host float format. These are all calculated by @code{autoconf}
+when the debugger is built.
Defines and information needed to handle the target format are target
dependent. Examples are the stack frame format, instruction set,
Information that is only needed when the host and target are the same,
is native dependent. One example is Unix child process support; if the
-host and target are not the same, doing a fork to start the target
+host and target are not the same, calling @code{fork} to start the target
process is a bad idea. The various macros needed for finding the
registers in the @code{upage}, running @code{ptrace}, and such are all
in the native-dependent files.
@code{#include} files that are only available on the host system. Core
file handling and @code{setjmp} handling are two common cases.
-When you want to make @value{GDBN} work ``native'' on a particular machine, you
-have to include all three kinds of information.
+When you want to make @value{GDBN} work as the traditional native debugger
+on a system, you will need to supply both target and native information.
@section Source Tree Structure
@cindex @value{GDBN} source tree structure
The @value{GDBN} source directory has a mostly flat structure---there
are only a few subdirectories. A file's name usually gives a hint as
to what it does; for example, @file{stabsread.c} reads stabs,
-@file{dwarfread.c} reads DWARF, etc.
+@file{dwarf2read.c} reads @sc{DWARF 2}, etc.
Files that are related to some common task have names that share
common substrings. For example, @file{*-thread.c} files deal with
algorithms and mentions some of the specific target definitions that
they use.
-@section Frames
-
-@cindex frame
-@cindex call stack frame
-A frame is a construct that @value{GDBN} uses to keep track of calling
-and called functions.
-
-@cindex frame, unwind
-@value{GDBN}'s frame model, a fresh design, was implemented with the
-need to support @sc{dwarf}'s Call Frame Information in mind. In fact,
-the term ``unwind'' is taken directly from that specification.
-Developers wishing to learn more about unwinders, are encouraged to
-read the the @sc{dwarf} specification.
-
-@findex frame_register_unwind
-@findex get_frame_register
-@value{GDBN}'s model is that you find a frame's registers by
-``unwinding'' them from the next younger frame. That is,
-@samp{get_frame_register} which returns the value of a register in
-frame #1 (the next-to-youngest frame), is implemented by calling frame
-#0's @code{frame_register_unwind} (the youngest frame). But then the
-obvious question is: how do you access the registers of the youngest
-frame itself?
-
-@cindex sentinel frame
-@findex get_frame_type
-@vindex SENTINEL_FRAME
-To answer this question, GDB has the @dfn{sentinel} frame, the
-``-1st'' frame. Unwinding registers from the sentinel frame gives you
-the current values of the youngest real frame's registers. If @var{f}
-is a sentinel frame, then @code{get_frame_type (@var{f}) ==
-SENTINEL_FRAME}.
-
@section Prologue Analysis
@cindex prologue analysis
although in practice only the ARC has failed to define such an
instruction.
-@findex BREAKPOINT
-The basic definition of the software breakpoint is the macro
-@code{BREAKPOINT}.
-
Basic breakpoint object handling is in @file{breakpoint.c}. However,
much of the interesting breakpoint action is in @file{infrun.c}.
For example, the remote target @samp{Z0} packet does not require
shadowing memory, so @code{shadow_len} is left at zero. However,
-the length reported by @code{BREAKPOINT_FROM_PC} is cached in
+the length reported by @code{gdbarch_breakpoint_from_pc} is cached in
@code{placed_size}, so that a matching @samp{z0} packet can be
used to remove the breakpoint.
which are visible in the output of the @samp{maint info breakpoint}
command.
-@findex GET_LONGJMP_TARGET
-To make this work, you need to define a macro called
-@code{GET_LONGJMP_TARGET}, which will examine the @code{jmp_buf}
-structure and extract the longjmp target address. Since @code{jmp_buf}
-is target specific, you will need to define it in the appropriate
-@file{tm-@var{target}.h} file. Look in @file{tm-sun4os4.h} and
-@file{sparc-tdep.c} for examples of how to do this.
+@findex gdbarch_get_longjmp_target
+To make this work, you need to define a function called
+@code{gdbarch_get_longjmp_target}, which will examine the
+@code{jmp_buf} structure and extract the @code{longjmp} target address.
+Since @code{jmp_buf} is target specific and typically defined in a
+target header not available to @value{GDBN}, you will need to
+determine the offset of the PC manually and return that; many targets
+define a @code{jb_pc_offset} field in the tdep structure to save the
+value once calculated.
@section Watchpoints
@cindex watchpoints
When the inferior stops, @value{GDBN} tries to establish, among other
possible reasons, whether it stopped due to a watchpoint being hit.
-For a data-write watchpoint, it does so by evaluating, for each
-watchpoint, the expression whose value is being watched, and testing
-whether the watched value has changed. For data-read and data-access
-watchpoints, @value{GDBN} needs the target to supply a primitive that
-returns the address of the data that was accessed or read (see the
-description of @code{target_stopped_data_address} below): if this
-primitive returns a valid address, @value{GDBN} infers that a
-watchpoint triggered if it watches an expression whose evaluation uses
-that address.
+It first uses @code{STOPPED_BY_WATCHPOINT} to see if any watchpoint
+was hit. If not, all watchpoint checking is skipped.
+
+Then @value{GDBN} calls @code{target_stopped_data_address} exactly
+once. This method returns the address of the watchpoint which
+triggered, if the target can determine it. If the triggered address
+is available, @value{GDBN} compares the address returned by this
+method with each watched memory address in each active watchpoint.
+For data-read and data-access watchpoints, @value{GDBN} announces
+every watchpoint that watches the triggered address as being hit.
+For this reason, data-read and data-access watchpoints
+@emph{require} that the triggered address be available; if not, read
+and access watchpoints will never be considered hit. For data-write
+watchpoints, if the triggered address is available, @value{GDBN}
+considers only those watchpoints which match that address;
+otherwise, @value{GDBN} considers all data-write watchpoints. For
+each data-write watchpoint that @value{GDBN} considers, it evaluates
+the expression whose value is being watched, and tests whether the
+watched value has changed. Watchpoints whose watched values have
+changed are announced as hit.
+
+@c FIXME move these to the main lists of target/native defns
@value{GDBN} uses several macros and primitives to support hardware
watchpoints:
@findex TARGET_HAS_HARDWARE_WATCHPOINTS
@item TARGET_HAS_HARDWARE_WATCHPOINTS
If defined, the target supports hardware watchpoints.
+(Currently only used for several native configs.)
@findex TARGET_CAN_USE_HARDWARE_WATCHPOINT
@item TARGET_CAN_USE_HARDWARE_WATCHPOINT (@var{type}, @var{count}, @var{other})
@item target_stopped_data_address (@var{addr_p})
If the inferior has some watchpoint that triggered, place the address
associated with the watchpoint at the location pointed to by
-@var{addr_p} and return non-zero. Otherwise, return zero. Note that
-this primitive is used by @value{GDBN} only on targets that support
-data-read or data-access type watchpoints, so targets that have
-support only for data-write watchpoints need not implement these
-primitives.
+@var{addr_p} and return non-zero. Otherwise, return zero. This
+is required for data-read and data-access watchpoints. It is
+not required for data-write watchpoints, but @value{GDBN} uses
+it to improve handling of those also.
+
+@value{GDBN} will only call this method once per watchpoint stop,
+immediately after calling @code{STOPPED_BY_WATCHPOINT}. If the
+target's watchpoint indication is sticky, i.e., stays set after
+resuming, this method should clear it. For instance, the x86 debug
+control register has sticky triggered flags.
+
+@findex target_watchpoint_addr_within_range
+@item target_watchpoint_addr_within_range (@var{target}, @var{addr}, @var{start}, @var{length})
+Check whether @var{addr} (as returned by @code{target_stopped_data_address})
+lies within the hardware-defined watchpoint region described by
+@var{start} and @var{length}. This only needs to be provided if the
+granularity of a watchpoint is greater than one byte, i.e., if the
+watchpoint can also trigger on nearby addresses outside of the watched
+region.
@findex HAVE_STEPPABLE_WATCHPOINT
@item HAVE_STEPPABLE_WATCHPOINT
If defined to a non-zero value, it is not necessary to disable a
-watchpoint to step over it.
-
-@findex HAVE_NONSTEPPABLE_WATCHPOINT
-@item HAVE_NONSTEPPABLE_WATCHPOINT
-If defined to a non-zero value, @value{GDBN} should disable a
-watchpoint to step the inferior over it.
+watchpoint to step over it. Like @code{gdbarch_have_nonsteppable_watchpoint},
+this is usually set when watchpoints trigger at the instruction
+which will perform an interesting read or write. It should be
+set if there is a temporary disable bit which allows the processor
+to step over the interesting instruction without raising the
+watchpoint exception again.
+
+@findex gdbarch_have_nonsteppable_watchpoint
+@item int gdbarch_have_nonsteppable_watchpoint (@var{gdbarch})
+If it returns a non-zero value, @value{GDBN} should disable a
+watchpoint to step the inferior over it. This is usually set when
+watchpoints trigger at the instruction which will perform an
+interesting read or write.
@findex HAVE_CONTINUABLE_WATCHPOINT
@item HAVE_CONTINUABLE_WATCHPOINT
If defined to a non-zero value, it is possible to continue the
-inferior after a watchpoint has been hit.
+inferior after a watchpoint has been hit. This is usually set
+when watchpoints trigger at the instruction following an interesting
+read or write.
@findex CANNOT_STEP_HW_WATCHPOINTS
@item CANNOT_STEP_HW_WATCHPOINTS
it could return non-zero ``just in case''.
@end table
+@subsection Watchpoints and Threads
+@cindex watchpoints, with threads
+
+@value{GDBN} only supports process-wide watchpoints, which trigger
+in all threads. @value{GDBN} uses the thread ID to make watchpoints
+act as if they were thread-specific, but it cannot set hardware
+watchpoints that only trigger in a specific thread. Therefore, even
+if the target supports threads, per-thread debug registers, and
+watchpoints which only affect a single thread, it should set the
+per-thread debug registers for all threads to the same value. On
+@sc{gnu}/Linux native targets, this is accomplished by using
+@code{ALL_LWPS} in @code{target_insert_watchpoint} and
+@code{target_remove_watchpoint} and by using
+@code{linux_set_new_thread} to register a handler for newly created
+threads.
+
+@value{GDBN}'s @sc{gnu}/Linux support only reports a single event
+at a time, although multiple events can trigger simultaneously for
+multi-threaded programs. When multiple events occur, @file{linux-nat.c}
+queues subsequent events and returns them the next time the program
+is resumed. This means that @code{STOPPED_BY_WATCHPOINT} and
+@code{target_stopped_data_address} only need to consult the current
+thread's state---the thread indicated by @code{inferior_ptid}. If
+two threads have hit watchpoints simultaneously, those routines
+will be called a second time for the second thread.
+
@subsection x86 Watchpoints
@cindex x86 debug registers
@cindex watchpoints, on x86
support for watchpoints and hardware-assisted breakpoints. This
subsection documents the x86 watchpoint facilities in @value{GDBN}.
+(At present, the library functions read and write debug registers directly, and are
+thus only available for native configurations.)
+
To use the generic x86 watchpoint support, a port should do the
following:
@item
Add @file{i386-nat.o} to the value of the Make variable
-@code{NATDEPFILES} (@pxref{Native Debugging, NATDEPFILES}) or
-@code{TDEPFILES} (@pxref{Target Architecture Definition, TDEPFILES}).
+@code{NATDEPFILES} (@pxref{Native Debugging, NATDEPFILES}).
@item
Provide implementations for the @code{I386_DR_LOW_*} macros described
@chapter User Interface
-@value{GDBN} has several user interfaces. Although the command-line interface
-is the most common and most familiar, there are others.
+@value{GDBN} has several user interfaces, of which the traditional
+command-line interface is perhaps the most familiar.
@section Command Interpreter
The first time a command is used the user will be warned and offered a
replacement (if one exists). Note that the replacement string passed to
-@code{deprecate_cmd} should be the full name of the command, i.e. the
+@code{deprecate_cmd} should be the full name of the command, i.e., the
entire string the user should type at the command line.
@section UI-Independent Output---the @code{ui_out} Functions
@deftypefun struct cleanup *make_cleanup_ui_out_list_begin_end (struct ui_out *@var{uiout}, const char *@var{id})
Similar to @code{make_cleanup_ui_out_tuple_begin_end}, this function
opens a list and then establishes cleanup (@pxref{Coding, Cleanups})
-that will close the list.list.
+that will close the list.
@end deftypefun
@subsection Item Output Functions
@{
if (nr_printable_breakpoints > 0)
annotate_field (4);
- if (TARGET_ADDR_BIT <= 32)
+ if (gdbarch_addr_bit (current_gdbarch) <= 32)
ui_out_table_header (uiout, 10, ui_left, "addr", "Address");/* 5 */
else
ui_out_table_header (uiout, 18, ui_left, "addr", "Address");/* 5 */
builder. The result of the query is constructed using that builder
before the query function returns.
+@node Values
+@chapter Values
+@section Values
+
+@cindex values
+@cindex @code{value} structure
+@value{GDBN} uses @code{struct value}, or @dfn{values}, as an internal
+abstraction for the representation of a variety of inferior objects
+and @value{GDBN} convenience objects.
+
+Values have an associated @code{struct type}, that describes a virtual
+view of the raw data or object stored in or accessed through the
+value.
+
+A value is in addition discriminated by its lvalue-ness, given its
+@code{enum lval_type} enumeration type:
+
+@cindex @code{lval_type} enumeration, for values.
+@table @code
+@item @code{not_lval}
+This value is not an lval. It can't be assigned to.
+
+@item @code{lval_memory}
+This value represents an object in memory.
+
+@item @code{lval_register}
+This value represents an object that lives in a register.
+
+@item @code{lval_internalvar}
+Represents the value of an internal variable.
+
+@item @code{lval_internalvar_component}
+Represents part of a @value{GDBN} internal variable. E.g., a
+structure field.
+
+@cindex computed values
+@item @code{lval_computed}
+These are ``computed'' values. They allow creating specialized value
+objects for specific purposes, all abstracted away from the core value
+support code. The creator of such a value writes specialized
+functions to handle the reading and writing to/from the value's
+backend data, and optionally, a ``copy operator'' and a
+``destructor''.
+
+Pointers to these functions are stored in a @code{struct lval_funcs}
+instance (declared in @file{value.h}), and passed to the
+@code{allocate_computed_value} function, as in the example below.
+
+@smallexample
+static void
+nil_value_read (struct value *v)
+@{
+ /* This callback reads data from some backend, and stores it in V.
+ In this case, we always read null data. You'll want to fill in
+ something more interesting. */
+
+ memset (value_contents_all_raw (v),
+ value_offset (v),
+ TYPE_LENGTH (value_type (v)));
+@}
+
+static void
+nil_value_write (struct value *v, struct value *fromval)
+@{
+ /* Takes the data from FROMVAL and stores it in the backend of V. */
+
+ to_oblivion (value_contents_all_raw (fromval),
+ value_offset (v),
+ TYPE_LENGTH (value_type (fromval)));
+@}
+
+static struct lval_funcs nil_value_funcs =
+ @{
+ nil_value_read,
+ nil_value_write
+ @};
+
+struct value *
+make_nil_value (void)
+@{
+ struct type *type;
+ struct value *v;
+
+ type = make_nils_type ();
+ v = allocate_computed_value (type, &nil_value_funcs, NULL);
+
+ return v;
+@}
+@end smallexample
+
+See the implementation of the @code{$_siginfo} convenience variable in
+@file{infrun.c} as a real example use of lval_computed.
+
+@end table
+
+@node Stack Frames
+@chapter Stack Frames
+
+@cindex frame
+@cindex call stack frame
+A frame is a construct that @value{GDBN} uses to keep track of calling
+and called functions.
+
+@cindex unwind frame
+@value{GDBN}'s frame model, a fresh design, was implemented with the
+need to support @sc{dwarf}'s Call Frame Information in mind. In fact,
+the term ``unwind'' is taken directly from that specification.
+Developers wishing to learn more about unwinders, are encouraged to
+read the @sc{dwarf} specification, available from
+@url{http://www.dwarfstd.org}.
+
+@findex frame_register_unwind
+@findex get_frame_register
+@value{GDBN}'s model is that you find a frame's registers by
+``unwinding'' them from the next younger frame. That is,
+@samp{get_frame_register} which returns the value of a register in
+frame #1 (the next-to-youngest frame), is implemented by calling frame
+#0's @code{frame_register_unwind} (the youngest frame). But then the
+obvious question is: how do you access the registers of the youngest
+frame itself?
+
+@cindex sentinel frame
+@findex get_frame_type
+@vindex SENTINEL_FRAME
+To answer this question, GDB has the @dfn{sentinel} frame, the
+``-1st'' frame. Unwinding registers from the sentinel frame gives you
+the current values of the youngest real frame's registers. If @var{f}
+is a sentinel frame, then @code{get_frame_type (@var{f}) @equiv{}
+SENTINEL_FRAME}.
+
+@section Selecting an Unwinder
+
+@findex frame_unwind_prepend_unwinder
+@findex frame_unwind_append_unwinder
+The architecture registers a list of frame unwinders (@code{struct
+frame_unwind}), using the functions
+@code{frame_unwind_prepend_unwinder} and
+@code{frame_unwind_append_unwinder}. Each unwinder includes a
+sniffer. Whenever @value{GDBN} needs to unwind a frame (to fetch the
+previous frame's registers or the current frame's ID), it calls
+registered sniffers in order to find one which recognizes the frame.
+The first time a sniffer returns non-zero, the corresponding unwinder
+is assigned to the frame.
+
+@section Unwinding the Frame ID
+@cindex frame ID
+
+Every frame has an associated ID, of type @code{struct frame_id}.
+The ID includes the stack base and function start address for
+the frame. The ID persists through the entire life of the frame,
+including while other called frames are running; it is used to
+locate an appropriate @code{struct frame_info} from the cache.
+
+Every time the inferior stops, and at various other times, the frame
+cache is flushed. Because of this, parts of @value{GDBN} which need
+to keep track of individual frames cannot use pointers to @code{struct
+frame_info}. A frame ID provides a stable reference to a frame, even
+when the unwinder must be run again to generate a new @code{struct
+frame_info} for the same frame.
+
+The frame's unwinder's @code{this_id} method is called to find the ID.
+Note that this is different from register unwinding, where the next
+frame's @code{prev_register} is called to unwind this frame's
+registers.
+
+Both stack base and function address are required to identify the
+frame, because a recursive function has the same function address for
+two consecutive frames and a leaf function may have the same stack
+address as its caller. On some platforms, a third address is part of
+the ID to further disambiguate frames---for instance, on IA-64
+the separate register stack address is included in the ID.
+
+An invalid frame ID (@code{null_frame_id}) returned from the
+@code{this_id} method means to stop unwinding after this frame.
+
+@section Unwinding Registers
+
+Each unwinder includes a @code{prev_register} method. This method
+takes a frame, an associated cache pointer, and a register number.
+It returns a @code{struct value *} describing the requested register,
+as saved by this frame. This is the value of the register that is
+current in this frame's caller.
+
+The returned value must have the same type as the register. It may
+have any lvalue type. In most circumstances one of these routines
+will generate the appropriate value:
+
+@table @code
+@item frame_unwind_got_optimized
+@findex frame_unwind_got_optimized
+This register was not saved.
+
+@item frame_unwind_got_register
+@findex frame_unwind_got_register
+This register was copied into another register in this frame. This
+is also used for unchanged registers; they are ``copied'' into the
+same register.
+
+@item frame_unwind_got_memory
+@findex frame_unwind_got_memory
+This register was saved in memory.
+
+@item frame_unwind_got_constant
+@findex frame_unwind_got_constant
+This register was not saved, but the unwinder can compute the previous
+value some other way.
+
+@item frame_unwind_got_address
+@findex frame_unwind_got_address
+Same as @code{frame_unwind_got_constant}, except that the value is a target
+address. This is frequently used for the stack pointer, which is not
+explicitly saved but has a known offset from this frame's stack
+pointer. For architectures with a flat unified address space, this is
+generally the same as @code{frame_unwind_got_constant}.
+@end table
+
@node Symbol Handling
@chapter Symbol Handling
-Symbols are a key part of @value{GDBN}'s operation. Symbols include variables,
-functions, and types.
+Symbols are a key part of @value{GDBN}'s operation. Symbols include
+variables, functions, and types.
+
+Symbol information for a large program can be truly massive, and
+reading of symbol information is one of the major performance
+bottlenecks in @value{GDBN}; it can take many minutes to process it
+all. Studies have shown that nearly all the time spent is
+computational, rather than file reading.
+
+One of the ways for @value{GDBN} to provide a good user experience is
+to start up quickly, taking no more than a few seconds. It is simply
+not possible to process all of a program's debugging info in that
+time, and so we attempt to handle symbols incrementally. For instance,
+we create @dfn{partial symbol tables} consisting of only selected
+symbols, and only expand them to full symbol tables when necessary.
@section Symbol Reading
file is the file containing the program which @value{GDBN} is
debugging. @value{GDBN} can be directed to use a different file for
symbols (with the @samp{symbol-file} command), and it can also read
-more symbols via the @samp{add-file} and @samp{load} commands, or while
-reading symbols from shared libraries.
+more symbols via the @samp{add-file} and @samp{load} commands. In
+addition, it may bring in more symbols while loading shared
+libraries.
@findex find_sym_fns
Symbol files are initially opened by code in @file{symfile.c} using
number of sections is limited.
The COFF specification includes support for debugging. Although this
-was a step forward, the debugging information was woefully limited. For
-instance, it was not possible to represent code that came from an
-included file.
+was a step forward, the debugging information was woefully limited.
+For instance, it was not possible to represent code that came from an
+included file. GNU's COFF-using configs often use stabs-type info,
+encapsulated in special sections.
The COFF reader is in @file{coffread.c}.
@subsection ELF
@cindex ELF format
-The ELF format came with System V Release 4 (SVR4) Unix. ELF is similar
-to COFF in being organized into a number of sections, but it removes
-many of COFF's limitations.
+The ELF format came with System V Release 4 (SVR4) Unix. ELF is
+similar to COFF in being organized into a number of sections, but it
+removes many of COFF's limitations. Debugging info may be either stabs
+encapsulated in ELF sections, or more commonly these days, DWARF.
The basic ELF reader is in @file{elfread.c}.
SOM is HP's object file and debug format (not to be confused with IBM's
SOM, which is a cross-language ABI).
-The SOM reader is in @file{hpread.c}.
-
-@subsection Other File Formats
-
-@cindex Netware Loadable Module format
-Other file formats that have been supported by @value{GDBN} include Netware
-Loadable Modules (@file{nlmread.c}).
+The SOM reader is in @file{somread.c}.
@section Debugging File Formats
The file @file{mdebugread.c} implements reading for this format.
-@subsection DWARF 1
-
-@cindex DWARF 1 debugging info
-DWARF 1 is a debugging format that was originally designed to be
-used with ELF in SVR4 systems.
-
-@c GCC_PRODUCER
-@c GPLUS_PRODUCER
-@c LCC_PRODUCER
-@c If defined, these are the producer strings in a DWARF 1 file. All of
-@c these have reasonable defaults already.
-
-The DWARF 1 reader is in @file{dwarfread.c}.
+@c mention DWARF 1 as a formerly-supported format
@subsection DWARF 2
The DWARF 2 reader is in @file{dwarf2read.c}.
+@subsection Compressed DWARF 2
+
+@cindex Compressed DWARF 2 debugging info
+Compressed DWARF 2 is not technically a separate debugging format, but
+merely DWARF 2 debug information that has been compressed. In this
+format, every object-file section holding DWARF 2 debugging
+information is compressed and prepended with a header. (The section
+is also typically renamed, so a section called @code{.debug_info} in a
+DWARF 2 binary would be called @code{.zdebug_info} in a compressed
+DWARF 2 binary.) The header is 12 bytes long:
+
+@itemize @bullet
+@item
+4 bytes: the literal string ``ZLIB''
+@item
+8 bytes: the uncompressed size of the section, in big-endian byte
+order.
+@end itemize
+
+The same reader is used for both compressed an normal DWARF 2 info.
+Section decompression is done in @code{zlib_decompress_section} in
+@file{dwarf2read.c}.
+
+@subsection DWARF 3
+
+@cindex DWARF 3 debugging info
+DWARF 3 is an improved version of DWARF 2.
+
@subsection SOM
@cindex SOM debugging info
BFD. This is beyond the scope of this document.
You must then arrange for the BFD code to provide access to the
-debugging symbols. Generally @value{GDBN} will have to call swapping routines
-from BFD and a few other BFD internal routines to locate the debugging
-information. As much as possible, @value{GDBN} should not depend on the BFD
-internal data structures.
+debugging symbols. Generally @value{GDBN} will have to call swapping
+routines from BFD and a few other BFD internal routines to locate the
+debugging information. As much as possible, @value{GDBN} should not
+depend on the BFD internal data structures.
For some targets (e.g., COFF), there is a special transfer vector used
to call swapping routines, since the external data structures on various
Add a call to @code{@var{lang}_parse()} and @code{@var{lang}_error} in
@code{parse_exp_1} (defined in @file{parse.c}).
-@item Use macros to trim code
-
-@cindex trimming language-dependent code
-The user has the option of building @value{GDBN} for some or all of the
-languages. If the user decides to build @value{GDBN} for the language
-@var{lang}, then every file dependent on @file{language.h} will have the
-macro @code{_LANG_@var{lang}} defined in it. Use @code{#ifdef}s to
-leave out large routines that the user won't need if he or she is not
-using your language.
-
-Note that you do not need to do this in your YACC parser, since if @value{GDBN}
-is not build for @var{lang}, then @file{@var{lang}-exp.tab.o} (the
-compiled form of your parser) is not linked into @value{GDBN} at all.
-
-See the file @file{configure.in} for how @value{GDBN} is configured
-for different languages.
-
@item Edit @file{Makefile.in}
Add dependencies in @file{Makefile.in}. Make sure you update the macro
@table @file
@item gdb/config/@var{arch}/@var{xyz}.mh
-This file once contained both host and native configuration information
-(@pxref{Native Debugging}) for the machine @var{xyz}. The host
-configuration information is now handed by Autoconf.
+This file is a Makefile fragment that once contained both host and
+native configuration information (@pxref{Native Debugging}) for the
+machine @var{xyz}. The host configuration information is now handled
+by Autoconf.
-Host configuration information included a definition of
-@code{XM_FILE=xm-@var{xyz}.h} and possibly definitions for @code{CC},
+Host configuration information included definitions for @code{CC},
@code{SYSV_DEFINE}, @code{XM_CFLAGS}, @code{XM_ADD_FILES},
@code{XM_CLIBS}, @code{XM_CDEPS}, etc.; see @file{Makefile.in}.
-New host only configurations do not need this file.
-
-@item gdb/config/@var{arch}/xm-@var{xyz}.h
-This file once contained definitions and includes required when hosting
-gdb on machine @var{xyz}. Those definitions and includes are now
-handled by Autoconf.
-
-New host and native configurations do not need this file.
-
-@emph{Maintainer's note: Some hosts continue to use the @file{xm-xyz.h}
-file to define the macros @var{HOST_FLOAT_FORMAT},
-@var{HOST_DOUBLE_FORMAT} and @var{HOST_LONG_DOUBLE_FORMAT}. That code
-also needs to be replaced with either an Autoconf or run-time test.}
+New host-only configurations do not need this file.
@end table
+(Files named @file{gdb/config/@var{arch}/xm-@var{xyz}.h} were once
+used to define host-specific macros, but were no longer needed and
+have all been removed.)
+
@subheading Generic Host Support Files
@cindex generic host support
There are some ``generic'' versions of routines that can be used by
-various systems. These can be customized in various ways by macros
-defined in your @file{xm-@var{xyz}.h} file. If these routines work for
-the @var{xyz} host, you can just include the generic file's name (with
-@samp{.o}, not @samp{.c}) in @code{XDEPFILES}.
-
-Otherwise, if your machine needs custom support routines, you will need
-to write routines that perform the same functions as the generic file.
-Put them into @code{@var{xyz}-xdep.c}, and put @code{@var{xyz}-xdep.o}
-into @code{XDEPFILES}.
+various systems.
@table @file
@cindex remote debugging support
@cindex serial line support
@item ser-unix.c
-This contains serial line support for Unix systems. This is always
-included, via the makefile variable @code{SER_HARDWIRE}; override this
-variable in the @file{.mh} file to avoid it.
+This contains serial line support for Unix systems. It is included by
+default on all Unix-like hosts.
+
+@item ser-pipe.c
+This contains serial pipe support for Unix systems. It is included by
+default on all Unix-like hosts.
+
+@item ser-mingw.c
+This contains serial line support for 32-bit programs running under
+Windows using MinGW.
@item ser-go32.c
This contains serial line support for 32-bit programs running under DOS,
@cindex TCP remote support
@item ser-tcp.c
-This contains generic TCP support using sockets.
+This contains generic TCP support using sockets. It is included by
+default on all Unix-like hosts and with MinGW.
@end table
@section Host Conditionals
When @value{GDBN} is configured and compiled, various macros are
defined or left undefined, to control compilation based on the
-attributes of the host system. These macros and their meanings (or if
-the meaning is not documented here, then one of the source files where
-they are used is indicated) are:
+attributes of the host system. While formerly they could be set in
+host-specific header files, at present they can be changed only by
+setting @code{CFLAGS} when building, or by editing the source code.
+
+These macros and their meanings (or if the meaning is not documented
+here, then one of the source files where they are used is indicated)
+are:
@ftable @code
@item @value{GDBN}INIT_FILENAME
The default name of @value{GDBN}'s initialization file (normally
@file{.gdbinit}).
-@item NO_STD_REGS
-This macro is deprecated.
-
@item SIGWINCH_HANDLER
If your host defines @code{SIGWINCH}, you can define this to be the name
of a function to be called if @code{SIGWINCH} is received.
Define this to expand into code that will define the function named by
the expansion of @code{SIGWINCH_HANDLER}.
-@item ALIGN_STACK_ON_STARTUP
-@cindex stack alignment
-Define this if your system is of a sort that will crash in
-@code{tgetent} if the stack happens not to be longword-aligned when
-@code{main} is called. This is a rare situation, but is known to occur
-on several different types of systems.
-
@item CRLF_SOURCE_FILES
@cindex DOS text files
Define this if host files use @code{\r\n} rather than @code{\n} as a
@cindex terminal device
The name of the generic TTY device, defaults to @code{"/dev/tty"}.
-@item FOPEN_RB
-Define this if binary files are opened the same way as text files.
-
-@item HAVE_MMAP
-@findex mmap
-In some cases, use the system call @code{mmap} for reading symbol
-tables. For some machines this allows for sharing and quick updates.
-
-@item HAVE_TERMIO
-Define this if the host system has @code{termio.h}.
-
-@item INT_MAX
-@itemx INT_MIN
-@itemx LONG_MAX
-@itemx UINT_MAX
-@itemx ULONG_MAX
-Values for host-side constants.
-
@item ISATTY
Substitute for isatty, if not available.
-@item LONGEST
-This is the longest integer type available on the host. If not defined,
-it will default to @code{long long} or @code{long}, depending on
-@code{CC_HAS_LONG_LONG}.
+@item FOPEN_RB
+Define this if binary files are opened the same way as text files.
@item CC_HAS_LONG_LONG
@cindex @code{long long} data type
the printf format conversion specifier @code{ll}. This is set by the
@code{configure} script.
-@item HAVE_LONG_DOUBLE
-Define this if the host C compiler supports @code{long double}. This is
-set by the @code{configure} script.
-
-@item PRINTF_HAS_LONG_DOUBLE
-Define this if the host can handle printing of long double float-point
-numbers via the printf format conversion specifier @code{Lg}. This is
-set by the @code{configure} script.
-
-@item SCANF_HAS_LONG_DOUBLE
-Define this if the host can handle the parsing of long double
-float-point numbers via the scanf format conversion specifier
-@code{Lg}. This is set by the @code{configure} script.
-
@item LSEEK_NOT_LINEAR
Define this if @code{lseek (n)} does not necessarily move to byte number
@code{n} in the file. This is only used when reading source files. It
is normally faster to define @code{CRLF_SOURCE_FILES} when possible.
-@item L_SET
-This macro is used as the argument to @code{lseek} (or, most commonly,
-@code{bfd_seek}). FIXME, should be replaced by SEEK_SET instead,
-which is the POSIX equivalent.
-
@item NORETURN
If defined, this should be one or more tokens, such as @code{volatile},
that can be used in both the declaration and definition of functions to
set correctly if compiling with GCC. This will almost never need to be
defined.
-@item SEEK_CUR
-@itemx SEEK_SET
-Define these to appropriate value for the system @code{lseek}, if not already
-defined.
-
-@item STOP_SIGNAL
-This is the signal for stopping @value{GDBN}. Defaults to
-@code{SIGTSTP}. (Only redefined for the Convex.)
-
-@item USG
-Means that System V (prior to SVR4) include files are in use. (FIXME:
-This symbol is abused in @file{infrun.c}, @file{regex.c}, and
-@file{utils.c} for other things, at the moment.)
-
@item lint
Define this to help placate @code{lint} in some situations.
@code{struct gdbarch *}. The structure, and its methods, are generated
using the Bourne shell script @file{gdbarch.sh}.
+@menu
+* OS ABI Variant Handling::
+* Initialize New Architecture::
+* Registers and Memory::
+* Pointers and Addresses::
+* Address Classes::
+* Raw and Virtual Registers::
+* Register and Memory Data::
+* Frame Interpretation::
+* Inferior Call Setup::
+* Compiler Characteristics::
+* Target Conditionals::
+* Adding a New Target::
+@end menu
+
+@node OS ABI Variant Handling
@section Operating System ABI Variant Handling
@cindex OS ABI variants
selected OS ABI. There may be only one handler for a given OS ABI
for each BFD architecture.
-The following OS ABI variants are defined in @file{osabi.h}:
+The following OS ABI variants are defined in @file{defs.h}:
@table @code
+@findex GDB_OSABI_UNINITIALIZED
+@item GDB_OSABI_UNINITIALIZED
+Used for struct gdbarch_info if ABI is still uninitialized.
+
@findex GDB_OSABI_UNKNOWN
@item GDB_OSABI_UNKNOWN
The ABI of the inferior is unknown. The default @code{gdbarch}
@findex GDB_OSABI_SVR4
@item GDB_OSABI_SVR4
-UNIX System V Release 4
+UNIX System V Release 4.
@findex GDB_OSABI_HURD
@item GDB_OSABI_HURD
-GNU using the Hurd kernel
+GNU using the Hurd kernel.
@findex GDB_OSABI_SOLARIS
@item GDB_OSABI_SOLARIS
-Sun Solaris
+Sun Solaris.
@findex GDB_OSABI_OSF1
@item GDB_OSABI_OSF1
-OSF/1, including Digital UNIX and Compaq Tru64 UNIX
+OSF/1, including Digital UNIX and Compaq Tru64 UNIX.
@findex GDB_OSABI_LINUX
@item GDB_OSABI_LINUX
-GNU using the Linux kernel
+GNU using the Linux kernel.
@findex GDB_OSABI_FREEBSD_AOUT
@item GDB_OSABI_FREEBSD_AOUT
-FreeBSD using the a.out executable format
+FreeBSD using the @code{a.out} executable format.
@findex GDB_OSABI_FREEBSD_ELF
@item GDB_OSABI_FREEBSD_ELF
-FreeBSD using the ELF executable format
+FreeBSD using the ELF executable format.
@findex GDB_OSABI_NETBSD_AOUT
@item GDB_OSABI_NETBSD_AOUT
-NetBSD using the a.out executable format
+NetBSD using the @code{a.out} executable format.
@findex GDB_OSABI_NETBSD_ELF
@item GDB_OSABI_NETBSD_ELF
-NetBSD using the ELF executable format
+NetBSD using the ELF executable format.
+
+@findex GDB_OSABI_OPENBSD_ELF
+@item GDB_OSABI_OPENBSD_ELF
+OpenBSD using the ELF executable format.
@findex GDB_OSABI_WINCE
@item GDB_OSABI_WINCE
-Windows CE
+Windows CE.
@findex GDB_OSABI_GO32
@item GDB_OSABI_GO32
-DJGPP
+DJGPP.
-@findex GDB_OSABI_NETWARE
-@item GDB_OSABI_NETWARE
-Novell NetWare
+@findex GDB_OSABI_IRIX
+@item GDB_OSABI_IRIX
+Irix.
-@findex GDB_OSABI_ARM_EABI_V1
-@item GDB_OSABI_ARM_EABI_V1
-ARM Embedded ABI version 1
+@findex GDB_OSABI_INTERIX
+@item GDB_OSABI_INTERIX
+Interix (Posix layer for MS-Windows systems).
-@findex GDB_OSABI_ARM_EABI_V2
-@item GDB_OSABI_ARM_EABI_V2
-ARM Embedded ABI version 2
+@findex GDB_OSABI_HPUX_ELF
+@item GDB_OSABI_HPUX_ELF
+HP/UX using the ELF executable format.
-@findex GDB_OSABI_ARM_APCS
-@item GDB_OSABI_ARM_APCS
-Generic ARM Procedure Call Standard
+@findex GDB_OSABI_HPUX_SOM
+@item GDB_OSABI_HPUX_SOM
+HP/UX using the SOM executable format.
+
+@findex GDB_OSABI_QNXNTO
+@item GDB_OSABI_QNXNTO
+QNX Neutrino.
+
+@findex GDB_OSABI_CYGWIN
+@item GDB_OSABI_CYGWIN
+Cygwin.
+
+@findex GDB_OSABI_AIX
+@item GDB_OSABI_AIX
+AIX.
@end table
with the defaults already established for @var{gdbarch}.
@end deftypefun
+@deftypefun void generic_elf_osabi_sniff_abi_tag_sections (bfd *@var{abfd}, asection *@var{sect}, void *@var{obj})
+Helper routine for ELF file sniffers. Examine the file described by
+@var{abfd} and look at ABI tag note sections to determine the OS ABI
+from the note. This function should be called via
+@code{bfd_map_over_sections}.
+@end deftypefun
+
+@node Initialize New Architecture
@section Initializing a New Architecture
Each @code{gdbarch} is associated with a single @sc{bfd} architecture,
so new @code{gdbarch} initialization functions should not take
defaults from @var{arches}.
+@node Registers and Memory
@section Registers and Memory
@value{GDBN}'s model of the target machine is rather simple.
compiler's idea of which registers are which; however, it is critical
that they do match up accurately. The only way to make this work is
to get accurate information about the order that the compiler uses,
-and to reflect that in the @code{REGISTER_NAME} and related macros.
+and to reflect that in the @code{gdbarch_register_name} and related functions.
@value{GDBN} can handle big-endian, little-endian, and bi-endian architectures.
+@node Pointers and Addresses
@section Pointers Are Not Always Addresses
@cindex pointer representation
@cindex address representation
address space, so they may choose a pointer representation that breaks this
identity, and allows a larger code address space.
+@c D10V is gone from sources - more current example?
+
For example, the Renesas D10V is a 16-bit VLIW processor whose
instructions are 32 bits long@footnote{Some D10V instructions are
actually pairs of 16-bit sub-instructions. However, since you can't
above for @code{store_typed_address}.
@end deftypefun
-Here are some macros which architectures can define to indicate the
+Here are two functions which architectures can define to indicate the
relationship between pointers and addresses. These have default
definitions, appropriate for architectures on which all pointers are
simple unsigned byte addresses.
-@deftypefn {Target Macro} CORE_ADDR POINTER_TO_ADDRESS (struct type *@var{type}, char *@var{buf})
+@deftypefun CORE_ADDR gdbarch_pointer_to_address (struct gdbarch *@var{current_gdbarch}, struct type *@var{type}, char *@var{buf})
Assume that @var{buf} holds a pointer of type @var{type}, in the
appropriate format for the current architecture. Return the byte
address the pointer refers to.
This function may safely assume that @var{type} is either a pointer or a
C@t{++} reference type.
-@end deftypefn
+@end deftypefun
-@deftypefn {Target Macro} void ADDRESS_TO_POINTER (struct type *@var{type}, char *@var{buf}, CORE_ADDR @var{addr})
+@deftypefun void gdbarch_address_to_pointer (struct gdbarch *@var{current_gdbarch}, struct type *@var{type}, char *@var{buf}, CORE_ADDR @var{addr})
Store in @var{buf} a pointer of type @var{type} representing the address
@var{addr}, in the appropriate format for the current architecture.
This function may safely assume that @var{type} is either a pointer or a
C@t{++} reference type.
-@end deftypefn
+@end deftypefun
+@node Address Classes
@section Address Classes
@cindex address classes
@cindex DW_AT_byte_size
types within @value{GDBN} as well as provide the added information to
a @value{GDBN} user when printing type expressions.
-@deftypefn {Target Macro} int ADDRESS_CLASS_TYPE_FLAGS (int @var{byte_size}, int @var{dwarf2_addr_class})
+@deftypefun int gdbarch_address_class_type_flags (struct gdbarch *@var{current_gdbarch}, int @var{byte_size}, int @var{dwarf2_addr_class})
Returns the type flags needed to construct a pointer type whose size
is @var{byte_size} and whose address class is @var{dwarf2_addr_class}.
This function is normally called from within a symbol reader. See
@file{dwarf2read.c}.
-@end deftypefn
+@end deftypefun
-@deftypefn {Target Macro} char *ADDRESS_CLASS_TYPE_FLAGS_TO_NAME (int @var{type_flags})
+@deftypefun char *gdbarch_address_class_type_flags_to_name (struct gdbarch *@var{current_gdbarch}, int @var{type_flags})
Given the type flags representing an address class qualifier, return
its name.
-@end deftypefn
-@deftypefn {Target Macro} int ADDRESS_CLASS_NAME_to_TYPE_FLAGS (int @var{name}, int *var{type_flags_ptr})
-Given an address qualifier name, set the @code{int} refererenced by @var{type_flags_ptr} to the type flags
+@end deftypefun
+@deftypefun int gdbarch_address_class_name_to_type_flags (struct gdbarch *@var{current_gdbarch}, int @var{name}, int *@var{type_flags_ptr})
+Given an address qualifier name, set the @code{int} referenced by @var{type_flags_ptr} to the type flags
for that address class qualifier.
-@end deftypefn
+@end deftypefun
Since the need for address classes is rather rare, none of
-the address class macros defined by default. Predicate
-macros are provided to detect when they are defined.
+the address class functions are defined by default. Predicate
+functions are provided to detect when they are defined.
Consider a hypothetical architecture in which addresses are normally
32-bits wide, but 16-bit addresses are also supported. Furthermore,
suppose that the @w{DWARF 2} information for this architecture simply
uses a @code{DW_AT_byte_size} value of 2 to indicate the use of one
of these "short" pointers. The following functions could be defined
-to implement the address class macros:
+to implement the address class functions:
@smallexample
somearch_address_class_type_flags (int byte_size,
@end smallexample
+@node Raw and Virtual Registers
@section Raw and Virtual Register Representations
@cindex raw register representation
@cindex virtual register representation
@emph{Maintainer note: This section is pretty much obsolete. The
functionality described here has largely been replaced by
-pseudo-registers and the mechanisms described in @ref{Target
-Architecture Definition, , Using Different Register and Memory Data
+pseudo-registers and the mechanisms described in @ref{Register and
+Memory Data, , Using Different Register and Memory Data
Representations}. See also @uref{http://www.gnu.org/software/gdb/bugs/,
Bug Tracking Database} and
@uref{http://sources.redhat.com/gdb/current/ari/, ARI Index} for more
unless this macro returns a non-zero value for that register.
@end deftypefn
-@deftypefn {Target Macro} int DEPRECATED_REGISTER_RAW_SIZE (int @var{reg})
-The size of register number @var{reg}'s raw value. This is the number
-of bytes the register will occupy in @code{registers}, or in a @value{GDBN}
-remote protocol packet.
-@end deftypefn
-
-@deftypefn {Target Macro} int DEPRECATED_REGISTER_VIRTUAL_SIZE (int @var{reg})
-The size of register number @var{reg}'s value, in its virtual format.
-This is the size a @code{struct value}'s buffer will have, holding that
-register's value.
-@end deftypefn
-
-@deftypefn {Target Macro} struct type *DEPRECATED_REGISTER_VIRTUAL_TYPE (int @var{reg})
-This is the type of the virtual representation of register number
-@var{reg}. Note that there is no need for a macro giving a type for the
-register's raw form; once the register's value has been obtained, @value{GDBN}
-always uses the virtual form.
-@end deftypefn
-
@deftypefn {Target Macro} void REGISTER_CONVERT_TO_VIRTUAL (int @var{reg}, struct type *@var{type}, char *@var{from}, char *@var{to})
Convert the value of register number @var{reg} to @var{type}, which
-should always be @code{DEPRECATED_REGISTER_VIRTUAL_TYPE (@var{reg})}. The buffer
+should always be @code{gdbarch_register_type (@var{reg})}. The buffer
at @var{from} holds the register's value in raw format; the macro should
convert the value to virtual format, and place it at @var{to}.
@deftypefn {Target Macro} void REGISTER_CONVERT_TO_RAW (struct type *@var{type}, int @var{reg}, char *@var{from}, char *@var{to})
Convert the value of register number @var{reg} to @var{type}, which
-should always be @code{DEPRECATED_REGISTER_VIRTUAL_TYPE (@var{reg})}. The buffer
+should always be @code{gdbarch_register_type (@var{reg})}. The buffer
at @var{from} holds the register's value in raw format; the macro should
convert the value to virtual format, and place it at @var{to}.
@end deftypefn
+@node Register and Memory Data
@section Using Different Register and Memory Data Representations
@cindex register representation
@cindex memory representation
@cindex @code{struct value}, converting register contents to
@emph{Maintainer's note: The way GDB manipulates registers is undergoing
-significant change. Many of the macros and functions refered to in this
+significant change. Many of the macros and functions referred to in this
section are likely to be subject to further revision. See
@uref{http://sources.redhat.com/gdb/current/ari/, A.R. Index} and
@uref{http://www.gnu.org/software/gdb/bugs, Bug Tracking Database} for
following macros to request conversions between the register and memory
representations of a data type:
-@deftypefn {Target Macro} int CONVERT_REGISTER_P (int @var{reg})
+@deftypefun int gdbarch_convert_register_p (struct gdbarch *@var{gdbarch}, int @var{reg})
Return non-zero if the representation of a data value stored in this
register may be different to the representation of that same data value
when stored in memory.
-When non-zero, the macros @code{REGISTER_TO_VALUE} and
-@code{VALUE_TO_REGISTER} are used to perform any necessary conversion.
-@end deftypefn
+When non-zero, the macros @code{gdbarch_register_to_value} and
+@code{value_to_register} are used to perform any necessary conversion.
+
+This function should return zero for the register's native type, when
+no conversion is necessary.
+@end deftypefun
-@deftypefn {Target Macro} void REGISTER_TO_VALUE (int @var{reg}, struct type *@var{type}, char *@var{from}, char *@var{to})
+@deftypefun void gdbarch_register_to_value (struct gdbarch *@var{gdbarch}, int @var{reg}, struct type *@var{type}, char *@var{from}, char *@var{to})
Convert the value of register number @var{reg} to a data object of type
@var{type}. The buffer at @var{from} holds the register's value in raw
format; the converted value should be placed in the buffer at @var{to}.
-Note that @code{REGISTER_TO_VALUE} and @code{VALUE_TO_REGISTER} take
-their @var{reg} and @var{type} arguments in different orders.
+Note that @code{gdbarch_register_to_value} and @code{gdbarch_value_to_register}
+take their @var{reg} and @var{type} arguments in different orders.
-You should only use @code{REGISTER_TO_VALUE} with registers for which
-the @code{CONVERT_REGISTER_P} macro returns a non-zero value.
-@end deftypefn
+You should only use @code{gdbarch_register_to_value} with registers for which
+the @code{gdbarch_convert_register_p} function returns a non-zero value.
+@end deftypefun
-@deftypefn {Target Macro} void VALUE_TO_REGISTER (struct type *@var{type}, int @var{reg}, char *@var{from}, char *@var{to})
+@deftypefun void gdbarch_value_to_register (struct gdbarch *@var{gdbarch}, struct type *@var{type}, int @var{reg}, char *@var{from}, char *@var{to})
Convert a data value of type @var{type} to register number @var{reg}'
raw format.
-Note that @code{REGISTER_TO_VALUE} and @code{VALUE_TO_REGISTER} take
-their @var{reg} and @var{type} arguments in different orders.
-
-You should only use @code{VALUE_TO_REGISTER} with registers for which
-the @code{CONVERT_REGISTER_P} macro returns a non-zero value.
-@end deftypefn
-
-@deftypefn {Target Macro} void REGISTER_CONVERT_TO_TYPE (int @var{regnum}, struct type *@var{type}, char *@var{buf})
-See @file{mips-tdep.c}. It does not do what you want.
-@end deftypefn
+Note that @code{gdbarch_register_to_value} and @code{gdbarch_value_to_register}
+take their @var{reg} and @var{type} arguments in different orders.
+You should only use @code{gdbarch_value_to_register} with registers for which
+the @code{gdbarch_convert_register_p} function returns a non-zero value.
+@end deftypefun
+@node Frame Interpretation
@section Frame Interpretation
+@node Inferior Call Setup
@section Inferior Call Setup
+@node Compiler Characteristics
@section Compiler Characteristics
+@node Target Conditionals
@section Target Conditionals
-This section describes the macros that you can use to define the target
-machine.
+This section describes the macros and functions that you can use to define the
+target machine.
@table @code
-@item ADDR_BITS_REMOVE (addr)
-@findex ADDR_BITS_REMOVE
+@item CORE_ADDR gdbarch_addr_bits_remove (@var{gdbarch}, @var{addr})
+@findex gdbarch_addr_bits_remove
If a raw machine instruction address includes any bits that are not
-really part of the address, then define this macro to expand into an
-expression that zeroes those bits in @var{addr}. This is only used for
-addresses of instructions, and even then not in all contexts.
+really part of the address, then this function is used to zero those bits in
+@var{addr}. This is only used for addresses of instructions, and even then not
+in all contexts.
For example, the two low-order bits of the PC on the Hewlett-Packard PA
2.0 architecture contain the privilege level of the corresponding
instruction. Since instructions must always be aligned on four-byte
boundaries, the processor masks out these bits to generate the actual
-address of the instruction. ADDR_BITS_REMOVE should filter out these
-bits with an expression such as @code{((addr) & ~3)}.
+address of the instruction. @code{gdbarch_addr_bits_remove} would then for
+example look like that:
+@smallexample
+arch_addr_bits_remove (CORE_ADDR addr)
+@{
+ return (addr &= ~0x3);
+@}
+@end smallexample
-@item ADDRESS_CLASS_NAME_TO_TYPE_FLAGS (@var{name}, @var{type_flags_ptr})
-@findex ADDRESS_CLASS_NAME_TO_TYPE_FLAGS
+@item int address_class_name_to_type_flags (@var{gdbarch}, @var{name}, @var{type_flags_ptr})
+@findex address_class_name_to_type_flags
If @var{name} is a valid address class qualifier name, set the @code{int}
referenced by @var{type_flags_ptr} to the mask representing the qualifier
and return 1. If @var{name} is not a valid address class qualifier name,
possibly some combination of these values or'd together.
@xref{Target Architecture Definition, , Address Classes}.
-@item ADDRESS_CLASS_NAME_TO_TYPE_FLAGS_P ()
-@findex ADDRESS_CLASS_NAME_TO_TYPE_FLAGS_P
-Predicate which indicates whether @code{ADDRESS_CLASS_NAME_TO_TYPE_FLAGS}
+@item int address_class_name_to_type_flags_p (@var{gdbarch})
+@findex address_class_name_to_type_flags_p
+Predicate which indicates whether @code{address_class_name_to_type_flags}
has been defined.
-@item ADDRESS_CLASS_TYPE_FLAGS (@var{byte_size}, @var{dwarf2_addr_class})
-@findex ADDRESS_CLASS_TYPE_FLAGS (@var{byte_size}, @var{dwarf2_addr_class})
+@item int gdbarch_address_class_type_flags (@var{gdbarch}, @var{byte_size}, @var{dwarf2_addr_class})
+@findex gdbarch_address_class_type_flags
Given a pointers byte size (as described by the debug information) and
the possible @code{DW_AT_address_class} value, return the type flags
used by @value{GDBN} to represent this address class. The value
values or'd together.
@xref{Target Architecture Definition, , Address Classes}.
-@item ADDRESS_CLASS_TYPE_FLAGS_P ()
-@findex ADDRESS_CLASS_TYPE_FLAGS_P
-Predicate which indicates whether @code{ADDRESS_CLASS_TYPE_FLAGS} has
+@item int gdbarch_address_class_type_flags_p (@var{gdbarch})
+@findex gdbarch_address_class_type_flags_p
+Predicate which indicates whether @code{gdbarch_address_class_type_flags_p} has
been defined.
-@item ADDRESS_CLASS_TYPE_FLAGS_TO_NAME (@var{type_flags})
-@findex ADDRESS_CLASS_TYPE_FLAGS_TO_NAME
+@item const char *gdbarch_address_class_type_flags_to_name (@var{gdbarch}, @var{type_flags})
+@findex gdbarch_address_class_type_flags_to_name
Return the name of the address class qualifier associated with the type
flags given by @var{type_flags}.
-@item ADDRESS_CLASS_TYPE_FLAGS_TO_NAME_P ()
-@findex ADDRESS_CLASS_TYPE_FLAGS_TO_NAME_P
-Predicate which indicates whether @code{ADDRESS_CLASS_TYPE_FLAGS_TO_NAME} has
-been defined.
+@item int gdbarch_address_class_type_flags_to_name_p (@var{gdbarch})
+@findex gdbarch_address_class_type_flags_to_name_p
+Predicate which indicates whether @code{gdbarch_address_class_type_flags_to_name} has been defined.
@xref{Target Architecture Definition, , Address Classes}.
-@item ADDRESS_TO_POINTER (@var{type}, @var{buf}, @var{addr})
-@findex ADDRESS_TO_POINTER
+@item void gdbarch_address_to_pointer (@var{gdbarch}, @var{type}, @var{buf}, @var{addr})
+@findex gdbarch_address_to_pointer
Store in @var{buf} a pointer of type @var{type} representing the address
@var{addr}, in the appropriate format for the current architecture.
-This macro may safely assume that @var{type} is either a pointer or a
+This function may safely assume that @var{type} is either a pointer or a
C@t{++} reference type.
@xref{Target Architecture Definition, , Pointers Are Not Always Addresses}.
-@item BELIEVE_PCC_PROMOTION
-@findex BELIEVE_PCC_PROMOTION
-Define if the compiler promotes a @code{short} or @code{char}
+@item int gdbarch_believe_pcc_promotion (@var{gdbarch})
+@findex gdbarch_believe_pcc_promotion
+Used to notify if the compiler promotes a @code{short} or @code{char}
parameter to an @code{int}, but still reports the parameter as its
original type, rather than the promoted type.
-@item BITS_BIG_ENDIAN
-@findex BITS_BIG_ENDIAN
-Define this if the numbering of bits in the targets does @strong{not} match the
-endianness of the target byte order. A value of 1 means that the bits
+@item gdbarch_bits_big_endian (@var{gdbarch})
+@findex gdbarch_bits_big_endian
+This is used if the numbering of bits in the targets does @strong{not} match
+the endianness of the target byte order. A value of 1 means that the bits
are numbered in a big-endian bit order, 0 means little-endian.
+@item set_gdbarch_bits_big_endian (@var{gdbarch}, @var{bits_big_endian})
+@findex set_gdbarch_bits_big_endian
+Calling set_gdbarch_bits_big_endian with a value of 1 indicates that the
+bits in the target are numbered in a big-endian bit order, 0 indicates
+little-endian.
+
@item BREAKPOINT
@findex BREAKPOINT
This is the character array initializer for the bit pattern to put into
longer than the shortest instruction of the architecture.
@code{BREAKPOINT} has been deprecated in favor of
-@code{BREAKPOINT_FROM_PC}.
+@code{gdbarch_breakpoint_from_pc}.
@item BIG_BREAKPOINT
@itemx LITTLE_BREAKPOINT
Similar to BREAKPOINT, but used for bi-endian targets.
@code{BIG_BREAKPOINT} and @code{LITTLE_BREAKPOINT} have been deprecated in
-favor of @code{BREAKPOINT_FROM_PC}.
-
-@item DEPRECATED_REMOTE_BREAKPOINT
-@itemx DEPRECATED_LITTLE_REMOTE_BREAKPOINT
-@itemx DEPRECATED_BIG_REMOTE_BREAKPOINT
-@findex DEPRECATED_BIG_REMOTE_BREAKPOINT
-@findex DEPRECATED_LITTLE_REMOTE_BREAKPOINT
-@findex DEPRECATED_REMOTE_BREAKPOINT
-Specify the breakpoint instruction sequence for a remote target.
-@code{DEPRECATED_REMOTE_BREAKPOINT},
-@code{DEPRECATED_BIG_REMOTE_BREAKPOINT} and
-@code{DEPRECATED_LITTLE_REMOTE_BREAKPOINT} have been deprecated in
-favor of @code{BREAKPOINT_FROM_PC} (@pxref{BREAKPOINT_FROM_PC}).
-
-@item BREAKPOINT_FROM_PC (@var{pcptr}, @var{lenptr})
-@findex BREAKPOINT_FROM_PC
-@anchor{BREAKPOINT_FROM_PC} Use the program counter to determine the
+favor of @code{gdbarch_breakpoint_from_pc}.
+
+@item const gdb_byte *gdbarch_breakpoint_from_pc (@var{gdbarch}, @var{pcptr}, @var{lenptr})
+@findex gdbarch_breakpoint_from_pc
+@anchor{gdbarch_breakpoint_from_pc} Use the program counter to determine the
contents and size of a breakpoint instruction. It returns a pointer to
-a string of bytes that encode a breakpoint instruction, stores the
+a static string of bytes that encode a breakpoint instruction, stores the
length of the string to @code{*@var{lenptr}}, and adjusts the program
counter (if necessary) to point to the actual memory location where the
-breakpoint should be inserted.
+breakpoint should be inserted. May return @code{NULL} to indicate that
+software breakpoints are not supported.
Although it is common to use a trap instruction for a breakpoint, it's
not required; for instance, the bit pattern could be an invalid
instruction. The breakpoint must be no longer than the shortest
instruction of the architecture.
+Provided breakpoint bytes can be also used by @code{bp_loc_is_permanent} to
+detect permanent breakpoints. @code{gdbarch_breakpoint_from_pc} should return
+an unchanged memory copy if it was called for a location with permanent
+breakpoint as some architectures use breakpoint instructions containing
+arbitrary parameter value.
+
Replaces all the other @var{BREAKPOINT} macros.
-@item MEMORY_INSERT_BREAKPOINT (@var{bp_tgt})
-@itemx MEMORY_REMOVE_BREAKPOINT (@var{bp_tgt})
-@findex MEMORY_REMOVE_BREAKPOINT
-@findex MEMORY_INSERT_BREAKPOINT
+@item int gdbarch_memory_insert_breakpoint (@var{gdbarch}, @var{bp_tgt})
+@itemx gdbarch_memory_remove_breakpoint (@var{gdbarch}, @var{bp_tgt})
+@findex gdbarch_memory_remove_breakpoint
+@findex gdbarch_memory_insert_breakpoint
Insert or remove memory based breakpoints. Reasonable defaults
(@code{default_memory_insert_breakpoint} and
@code{default_memory_remove_breakpoint} respectively) have been
-provided so that it is not necessary to define these for most
-architectures. Architectures which may want to define
-@code{MEMORY_INSERT_BREAKPOINT} and @code{MEMORY_REMOVE_BREAKPOINT} will
-likely have instructions that are oddly sized or are not stored in a
+provided so that it is not necessary to set these for most
+architectures. Architectures which may want to set
+@code{gdbarch_memory_insert_breakpoint} and @code{gdbarch_memory_remove_breakpoint} will likely have instructions that are oddly sized or are not stored in a
conventional manner.
It may also be desirable (from an efficiency standpoint) to define
custom breakpoint insertion and removal routines if
-@code{BREAKPOINT_FROM_PC} needs to read the target's memory for some
+@code{gdbarch_breakpoint_from_pc} needs to read the target's memory for some
reason.
-@item ADJUST_BREAKPOINT_ADDRESS (@var{address})
-@findex ADJUST_BREAKPOINT_ADDRESS
+@item CORE_ADDR gdbarch_adjust_breakpoint_address (@var{gdbarch}, @var{bpaddr})
+@findex gdbarch_adjust_breakpoint_address
@cindex breakpoint address adjusted
Given an address at which a breakpoint is desired, return a breakpoint
address adjusted to account for architectural constraints on
in parallel, so the @emph{first} instruction is the instruction
at the lowest address and has nothing to do with execution order.)
-The FR-V's @code{ADJUST_BREAKPOINT_ADDRESS} method will adjust a
+The FR-V's @code{gdbarch_adjust_breakpoint_address} method will adjust a
breakpoint's address by scanning backwards for the beginning of
the bundle, returning the address of the bundle.
expectation, @value{GDBN} prints a warning when an adjusted breakpoint
is initially set and each time that that breakpoint is hit.
-@item CALL_DUMMY_LOCATION
-@findex CALL_DUMMY_LOCATION
+@item int gdbarch_call_dummy_location (@var{gdbarch})
+@findex gdbarch_call_dummy_location
See the file @file{inferior.h}.
-This method has been replaced by @code{push_dummy_code}
-(@pxref{push_dummy_code}).
+This method has been replaced by @code{gdbarch_push_dummy_code}
+(@pxref{gdbarch_push_dummy_code}).
-@item CANNOT_FETCH_REGISTER (@var{regno})
-@findex CANNOT_FETCH_REGISTER
-A C expression that should be nonzero if @var{regno} cannot be fetched
-from an inferior process. This is only relevant if
-@code{FETCH_INFERIOR_REGISTERS} is not defined.
+@item int gdbarch_cannot_fetch_register (@var{gdbarch}, @var{regum})
+@findex gdbarch_cannot_fetch_register
+This function should return nonzero if @var{regno} cannot be fetched
+from an inferior process.
-@item CANNOT_STORE_REGISTER (@var{regno})
-@findex CANNOT_STORE_REGISTER
-A C expression that should be nonzero if @var{regno} should not be
+@item int gdbarch_cannot_store_register (@var{gdbarch}, @var{regnum})
+@findex gdbarch_cannot_store_register
+This function should return nonzero if @var{regno} should not be
written to the target. This is often the case for program counters,
-status words, and other special registers. If this is not defined,
-@value{GDBN} will assume that all registers may be written.
+status words, and other special registers. This function returns 0 as
+default so that @value{GDBN} will assume that all registers may be written.
-@item int CONVERT_REGISTER_P(@var{regnum})
-@findex CONVERT_REGISTER_P
-Return non-zero if register @var{regnum} can represent data values in a
-non-standard form.
+@item int gdbarch_convert_register_p (@var{gdbarch}, @var{regnum}, struct type *@var{type})
+@findex gdbarch_convert_register_p
+Return non-zero if register @var{regnum} represents data values of type
+@var{type} in a non-standard form.
@xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}.
-@item DECR_PC_AFTER_BREAK
-@findex DECR_PC_AFTER_BREAK
-Define this to be the amount by which to decrement the PC after the
+@item int gdbarch_fp0_regnum (@var{gdbarch})
+@findex gdbarch_fp0_regnum
+This function returns the number of the first floating point register,
+if the machine has such registers. Otherwise, it returns -1.
+
+@item CORE_ADDR gdbarch_decr_pc_after_break (@var{gdbarch})
+@findex gdbarch_decr_pc_after_break
+This function shall return the amount by which to decrement the PC after the
program encounters a breakpoint. This is often the number of bytes in
@code{BREAKPOINT}, though not always. For most targets this value will be 0.
If defined, this should evaluate to 1 if @var{addr} is in a shared
library in which breakpoints cannot be set and so should be disabled.
-@item PRINT_FLOAT_INFO()
-@findex PRINT_FLOAT_INFO
+@item void gdbarch_print_float_info (@var{gdbarch}, @var{file}, @var{frame}, @var{args})
+@findex gdbarch_print_float_info
If defined, then the @samp{info float} command will print information about
the processor's floating point unit.
-@item print_registers_info (@var{gdbarch}, @var{frame}, @var{regnum}, @var{all})
-@findex print_registers_info
+@item void gdbarch_print_registers_info (@var{gdbarch}, @var{frame}, @var{regnum}, @var{all})
+@findex gdbarch_print_registers_info
If defined, pretty print the value of the register @var{regnum} for the
specified @var{frame}. If the value of @var{regnum} is -1, pretty print
either all registers (@var{all} is non zero) or a select subset of
The default method prints one register per line, and if @var{all} is
zero omits floating-point registers.
-@item PRINT_VECTOR_INFO()
-@findex PRINT_VECTOR_INFO
+@item int gdbarch_print_vector_info (@var{gdbarch}, @var{file}, @var{frame}, @var{args})
+@findex gdbarch_print_vector_info
If defined, then the @samp{info vector} command will call this function
to print information about the processor's vector unit.
By default, the @samp{info vector} command will print all vector
registers (the register's type having the vector attribute).
-@item DWARF_REG_TO_REGNUM
-@findex DWARF_REG_TO_REGNUM
-Convert DWARF register number into @value{GDBN} regnum. If not defined,
-no conversion will be performed.
-
-@item DWARF2_REG_TO_REGNUM
-@findex DWARF2_REG_TO_REGNUM
-Convert DWARF2 register number into @value{GDBN} regnum. If not
-defined, no conversion will be performed.
-
-@item ECOFF_REG_TO_REGNUM
-@findex ECOFF_REG_TO_REGNUM
-Convert ECOFF register number into @value{GDBN} regnum. If not defined,
-no conversion will be performed.
-
-@item END_OF_TEXT_DEFAULT
-@findex END_OF_TEXT_DEFAULT
-This is an expression that should designate the end of the text section.
-@c (? FIXME ?)
-
-@item EXTRACT_RETURN_VALUE(@var{type}, @var{regbuf}, @var{valbuf})
-@findex EXTRACT_RETURN_VALUE
-Define this to extract a function's return value of type @var{type} from
-the raw register state @var{regbuf} and copy that, in virtual format,
-into @var{valbuf}.
-
-This method has been deprecated in favour of @code{gdbarch_return_value}
-(@pxref{gdbarch_return_value}).
-
-@item DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS(@var{regbuf})
-@findex DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS
-@anchor{DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS}
-When defined, extract from the array @var{regbuf} (containing the raw
-register state) the @code{CORE_ADDR} at which a function should return
-its structure value.
-
-@xref{gdbarch_return_value}.
-
-@item DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS_P()
-@findex DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS_P
-Predicate for @code{DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS}.
-
-@item DEPRECATED_FP_REGNUM
-@findex DEPRECATED_FP_REGNUM
-If the virtual frame pointer is kept in a register, then define this
-macro to be the number (greater than or equal to zero) of that register.
+@item int gdbarch_dwarf2_reg_to_regnum (@var{gdbarch}, @var{dwarf2_regnr})
+@findex gdbarch_dwarf2_reg_to_regnum
+Convert DWARF2 register number @var{dwarf2_regnr} into @value{GDBN} regnum.
+If not defined, no conversion will be performed.
-This should only need to be defined if @code{DEPRECATED_TARGET_READ_FP}
-is not defined.
+@item int gdbarch_ecoff_reg_to_regnum (@var{gdbarch}, @var{ecoff_regnr})
+@findex gdbarch_ecoff_reg_to_regnum
+Convert ECOFF register number @var{ecoff_regnr} into @value{GDBN} regnum. If
+not defined, no conversion will be performed.
-@item DEPRECATED_FRAMELESS_FUNCTION_INVOCATION(@var{fi})
-@findex DEPRECATED_FRAMELESS_FUNCTION_INVOCATION
-Define this to an expression that returns 1 if the function invocation
-represented by @var{fi} does not have a stack frame associated with it.
-Otherwise return 0.
-
-@item frame_align (@var{address})
+@item CORE_ADDR frame_align (@var{gdbarch}, @var{address})
@anchor{frame_align}
@findex frame_align
Define this to adjust @var{address} so that it meets the alignment
requirements for the start of a new stack frame. A stack frame's
alignment requirements are typically stronger than a target processors
-stack alignment requirements (@pxref{DEPRECATED_STACK_ALIGN}).
+stack alignment requirements.
This function is used to ensure that, when creating a dummy frame, both
the initial stack pointer and (if needed) the address of the return
value are correctly aligned.
-Unlike @code{DEPRECATED_STACK_ALIGN}, this function always adjusts the
-address in the direction of stack growth.
+This function always adjusts the address in the direction of stack
+growth.
By default, no frame based stack alignment is performed.
-@item int frame_red_zone_size
-
+@item int gdbarch_frame_red_zone_size (@var{gdbarch})
+@findex gdbarch_frame_red_zone_size
The number of bytes, beyond the innermost-stack-address, reserved by the
@sc{abi}. A function is permitted to use this scratch area (instead of
allocating extra stack space).
When performing an inferior function call, to ensure that it does not
modify this area, @value{GDBN} adjusts the innermost-stack-address by
-@var{frame_red_zone_size} bytes before pushing parameters onto the
+@var{gdbarch_frame_red_zone_size} bytes before pushing parameters onto the
stack.
By default, zero bytes are allocated. The value must be aligned
@emph{red zone} when describing this scratch area.
@cindex red zone
-@item DEPRECATED_FRAME_CHAIN(@var{frame})
-@findex DEPRECATED_FRAME_CHAIN
-Given @var{frame}, return a pointer to the calling frame.
-
-@item DEPRECATED_FRAME_CHAIN_VALID(@var{chain}, @var{thisframe})
-@findex DEPRECATED_FRAME_CHAIN_VALID
-Define this to be an expression that returns zero if the given frame is an
-outermost frame, with no caller, and nonzero otherwise. Most normal
-situations can be handled without defining this macro, including @code{NULL}
-chain pointers, dummy frames, and frames whose PC values are inside the
-startup file (e.g.@: @file{crt0.o}), inside @code{main}, or inside
-@code{_start}.
-
-@item DEPRECATED_FRAME_INIT_SAVED_REGS(@var{frame})
-@findex DEPRECATED_FRAME_INIT_SAVED_REGS
-See @file{frame.h}. Determines the address of all registers in the
-current stack frame storing each in @code{frame->saved_regs}. Space for
-@code{frame->saved_regs} shall be allocated by
-@code{DEPRECATED_FRAME_INIT_SAVED_REGS} using
-@code{frame_saved_regs_zalloc}.
-
@code{FRAME_FIND_SAVED_REGS} is deprecated.
-@item FRAME_NUM_ARGS (@var{fi})
-@findex FRAME_NUM_ARGS
-For the frame described by @var{fi} return the number of arguments that
+@item int gdbarch_frame_num_args (@var{gdbarch}, @var{frame})
+@findex gdbarch_frame_num_args
+For the frame described by @var{frame} return the number of arguments that
are being passed. If the number of arguments is not known, return
@code{-1}.
-@item DEPRECATED_FRAME_SAVED_PC(@var{frame})
-@findex DEPRECATED_FRAME_SAVED_PC
-@anchor{DEPRECATED_FRAME_SAVED_PC} Given @var{frame}, return the pc
-saved there. This is the return address.
-
-This method is deprecated. @xref{unwind_pc}.
-
-@item CORE_ADDR unwind_pc (struct frame_info *@var{this_frame})
-@findex unwind_pc
-@anchor{unwind_pc} Return the instruction address, in @var{this_frame}'s
-caller, at which execution will resume after @var{this_frame} returns.
-This is commonly refered to as the return address.
+@item CORE_ADDR gdbarch_unwind_pc (@var{next_frame})
+@findex gdbarch_unwind_pc
+@anchor{gdbarch_unwind_pc} Return the instruction address, in
+@var{next_frame}'s caller, at which execution will resume after
+@var{next_frame} returns. This is commonly referred to as the return address.
The implementation, which must be frame agnostic (work with any frame),
is typically no more than:
@smallexample
ULONGEST pc;
-frame_unwind_unsigned_register (this_frame, D10V_PC_REGNUM, &pc);
-return d10v_make_iaddr (pc);
+pc = frame_unwind_register_unsigned (next_frame, S390_PC_REGNUM);
+return gdbarch_addr_bits_remove (gdbarch, pc);
@end smallexample
@noindent
-@xref{DEPRECATED_FRAME_SAVED_PC}, which this method replaces.
-@item CORE_ADDR unwind_sp (struct frame_info *@var{this_frame})
-@findex unwind_sp
-@anchor{unwind_sp} Return the frame's inner most stack address. This is
-commonly refered to as the frame's @dfn{stack pointer}.
+@item CORE_ADDR gdbarch_unwind_sp (@var{gdbarch}, @var{next_frame})
+@findex gdbarch_unwind_sp
+@anchor{gdbarch_unwind_sp} Return the frame's inner most stack address. This is
+commonly referred to as the frame's @dfn{stack pointer}.
The implementation, which must be frame agnostic (work with any frame),
is typically no more than:
@smallexample
ULONGEST sp;
-frame_unwind_unsigned_register (this_frame, D10V_SP_REGNUM, &sp);
-return d10v_make_daddr (sp);
+sp = frame_unwind_register_unsigned (next_frame, S390_SP_REGNUM);
+return gdbarch_addr_bits_remove (gdbarch, sp);
@end smallexample
@noindent
@xref{TARGET_READ_SP}, which this method replaces.
-@item FUNCTION_EPILOGUE_SIZE
-@findex FUNCTION_EPILOGUE_SIZE
-For some COFF targets, the @code{x_sym.x_misc.x_fsize} field of the
-function end symbol is 0. For such targets, you must define
-@code{FUNCTION_EPILOGUE_SIZE} to expand into the standard size of a
-function's epilogue.
-
-@item DEPRECATED_FUNCTION_START_OFFSET
-@findex DEPRECATED_FUNCTION_START_OFFSET
-An integer, giving the offset in bytes from a function's address (as
-used in the values of symbols, function pointers, etc.), and the
-function's first genuine instruction.
-
-This is zero on almost all machines: the function's address is usually
-the address of its first instruction. However, on the VAX, for
-example, each function starts with two bytes containing a bitmask
-indicating which registers to save upon entry to the function. The
-VAX @code{call} instructions check this value, and save the
-appropriate registers automatically. Thus, since the offset from the
-function's address to its first instruction is two bytes,
-@code{DEPRECATED_FUNCTION_START_OFFSET} would be 2 on the VAX.
-
@item GCC_COMPILED_FLAG_SYMBOL
@itemx GCC2_COMPILED_FLAG_SYMBOL
@findex GCC2_COMPILED_FLAG_SYMBOL
are @code{gcc_compiled.} and @code{gcc2_compiled.},
respectively. (Currently only defined for the Delta 68.)
-@item @value{GDBN}_MULTI_ARCH
-@findex @value{GDBN}_MULTI_ARCH
-If defined and non-zero, enables support for multiple architectures
-within @value{GDBN}.
-
-This support can be enabled at two levels. At level one, only
-definitions for previously undefined macros are provided; at level two,
-a multi-arch definition of all architecture dependent macros will be
-defined.
-
-@item @value{GDBN}_TARGET_IS_HPPA
-@findex @value{GDBN}_TARGET_IS_HPPA
-This determines whether horrible kludge code in @file{dbxread.c} and
-@file{partial-stab.h} is used to mangle multiple-symbol-table files from
-HPPA's. This should all be ripped out, and a scheme like @file{elfread.c}
-used instead.
-
-@item GET_LONGJMP_TARGET
-@findex GET_LONGJMP_TARGET
-For most machines, this is a target-dependent parameter. On the
-DECstation and the Iris, this is a native-dependent parameter, since
-the header file @file{setjmp.h} is needed to define it.
-
-This macro determines the target PC address that @code{longjmp} will jump to,
-assuming that we have just stopped at a @code{longjmp} breakpoint. It takes a
-@code{CORE_ADDR *} as argument, and stores the target PC value through this
-pointer. It examines the current state of the machine as needed.
-
-@item DEPRECATED_GET_SAVED_REGISTER
-@findex DEPRECATED_GET_SAVED_REGISTER
-Define this if you need to supply your own definition for the function
-@code{DEPRECATED_GET_SAVED_REGISTER}.
+@item gdbarch_get_longjmp_target
+@findex gdbarch_get_longjmp_target
+This function determines the target PC address that @code{longjmp}
+will jump to, assuming that we have just stopped at a @code{longjmp}
+breakpoint. It takes a @code{CORE_ADDR *} as argument, and stores the
+target PC value through this pointer. It examines the current state
+of the machine as needed, typically by using a manually-determined
+offset into the @code{jmp_buf}. (While we might like to get the offset
+from the target's @file{jmpbuf.h}, that header file cannot be assumed
+to be available when building a cross-debugger.)
@item DEPRECATED_IBM6000_TARGET
@findex DEPRECATED_IBM6000_TARGET
Shows that we are configured for an IBM RS/6000 system. This
conditional should be eliminated (FIXME) and replaced by
-feature-specific macros. It was introduced in a haste and we are
+feature-specific macros. It was introduced in haste and we are
repenting at leisure.
@item I386_USE_GENERIC_WATCHPOINTS
An x86-based target can define this to use the generic x86 watchpoint
support; see @ref{Algorithms, I386_USE_GENERIC_WATCHPOINTS}.
-@item SYMBOLS_CAN_START_WITH_DOLLAR
-@findex SYMBOLS_CAN_START_WITH_DOLLAR
-Some systems have routines whose names start with @samp{$}. Giving this
-macro a non-zero value tells @value{GDBN}'s expression parser to check for such
-routines when parsing tokens that begin with @samp{$}.
-
-On HP-UX, certain system routines (millicode) have names beginning with
-@samp{$} or @samp{$$}. For example, @code{$$dyncall} is a millicode
-routine that handles inter-space procedure calls on PA-RISC.
-
-@item DEPRECATED_INIT_EXTRA_FRAME_INFO (@var{fromleaf}, @var{frame})
-@findex DEPRECATED_INIT_EXTRA_FRAME_INFO
-If additional information about the frame is required this should be
-stored in @code{frame->extra_info}. Space for @code{frame->extra_info}
-is allocated using @code{frame_extra_info_zalloc}.
-
-@item DEPRECATED_INIT_FRAME_PC (@var{fromleaf}, @var{prev})
-@findex DEPRECATED_INIT_FRAME_PC
-This is a C statement that sets the pc of the frame pointed to by
-@var{prev}. [By default...]
-
-@item INNER_THAN (@var{lhs}, @var{rhs})
-@findex INNER_THAN
+@item int gdbarch_inner_than (@var{gdbarch}, @var{lhs}, @var{rhs})
+@findex gdbarch_inner_than
Returns non-zero if stack address @var{lhs} is inner than (nearer to the
-stack top) stack address @var{rhs}. Define this as @code{lhs < rhs} if
-the target's stack grows downward in memory, or @code{lhs > rsh} if the
-stack grows upward.
+stack top) stack address @var{rhs}. Let the function return
+@w{@code{lhs < rhs}} if the target's stack grows downward in memory, or
+@w{@code{lhs > rsh}} if the stack grows upward.
-@item gdbarch_in_function_epilogue_p (@var{gdbarch}, @var{pc})
+@item gdbarch_in_function_epilogue_p (@var{gdbarch}, @var{addr})
@findex gdbarch_in_function_epilogue_p
-Returns non-zero if the given @var{pc} is in the epilogue of a function.
+Returns non-zero if the given @var{addr} is in the epilogue of a function.
The epilogue of a function is defined as the part of a function where
the stack frame of the function already has been destroyed up to the
final `return from function call' instruction.
-@item DEPRECATED_SIGTRAMP_START (@var{pc})
-@findex DEPRECATED_SIGTRAMP_START
-@itemx DEPRECATED_SIGTRAMP_END (@var{pc})
-@findex DEPRECATED_SIGTRAMP_END
-Define these to be the start and end address of the @code{sigtramp} for the
-given @var{pc}. On machines where the address is just a compile time
-constant, the macro expansion will typically just ignore the supplied
-@var{pc}.
-
-@item IN_SOLIB_CALL_TRAMPOLINE (@var{pc}, @var{name})
-@findex IN_SOLIB_CALL_TRAMPOLINE
-Define this to evaluate to nonzero if the program is stopped in the
-trampoline that connects to a shared library.
-
-@item IN_SOLIB_RETURN_TRAMPOLINE (@var{pc}, @var{name})
-@findex IN_SOLIB_RETURN_TRAMPOLINE
-Define this to evaluate to nonzero if the program is stopped in the
+@item int gdbarch_in_solib_return_trampoline (@var{gdbarch}, @var{pc}, @var{name})
+@findex gdbarch_in_solib_return_trampoline
+Define this function to return nonzero if the program is stopped in the
trampoline that returns from a shared library.
-@item IN_SOLIB_DYNSYM_RESOLVE_CODE (@var{pc})
-@findex IN_SOLIB_DYNSYM_RESOLVE_CODE
-Define this to evaluate to nonzero if the program is stopped in the
+@item target_so_ops.in_dynsym_resolve_code (@var{pc})
+@findex in_dynsym_resolve_code
+Define this to return nonzero if the program is stopped in the
dynamic linker.
@item SKIP_SOLIB_RESOLVER (@var{pc})
to set a breakpoint to get through the dynamic linker and that single
stepping will suffice.
-@item INTEGER_TO_ADDRESS (@var{type}, @var{buf})
-@findex INTEGER_TO_ADDRESS
+@item CORE_ADDR gdbarch_integer_to_address (@var{gdbarch}, @var{type}, @var{buf})
+@findex gdbarch_integer_to_address
@cindex converting integers to addresses
Define this when the architecture needs to handle non-pointer to address
conversions specially. Converts that value to an address according to
out that users aren't complaining about how @value{GDBN} casts integers
to pointers; they are complaining that they can't take an address from a
disassembly listing and give it to @code{x/i}. Adding an architecture
-method like @code{INTEGER_TO_ADDRESS} certainly makes it possible for
+method like @code{gdbarch_integer_to_address} certainly makes it possible for
@value{GDBN} to ``get it right'' in all circumstances.}
@xref{Target Architecture Definition, , Pointers Are Not Always
Addresses}.
-@item NO_HIF_SUPPORT
-@findex NO_HIF_SUPPORT
-(Specific to the a29k.)
-
-@item POINTER_TO_ADDRESS (@var{type}, @var{buf})
-@findex POINTER_TO_ADDRESS
+@item CORE_ADDR gdbarch_pointer_to_address (@var{gdbarch}, @var{type}, @var{buf})
+@findex gdbarch_pointer_to_address
Assume that @var{buf} holds a pointer of type @var{type}, in the
appropriate format for the current architecture. Return the byte
address the pointer refers to.
@xref{Target Architecture Definition, , Pointers Are Not Always Addresses}.
-@item REGISTER_CONVERTIBLE (@var{reg})
-@findex REGISTER_CONVERTIBLE
-Return non-zero if @var{reg} uses different raw and virtual formats.
-@xref{Target Architecture Definition, , Raw and Virtual Register Representations}.
-
-@item REGISTER_TO_VALUE(@var{regnum}, @var{type}, @var{from}, @var{to})
-@findex REGISTER_TO_VALUE
+@item void gdbarch_register_to_value(@var{gdbarch}, @var{frame}, @var{regnum}, @var{type}, @var{fur})
+@findex gdbarch_register_to_value
Convert the raw contents of register @var{regnum} into a value of type
@var{type}.
@xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}.
-@item DEPRECATED_REGISTER_RAW_SIZE (@var{reg})
-@findex DEPRECATED_REGISTER_RAW_SIZE
-Return the raw size of @var{reg}; defaults to the size of the register's
-virtual type.
-@xref{Target Architecture Definition, , Raw and Virtual Register Representations}.
-
@item register_reggroup_p (@var{gdbarch}, @var{regnum}, @var{reggroup})
@findex register_reggroup_p
@cindex register groups
Any register with a valid name.
@end table
-@item DEPRECATED_REGISTER_VIRTUAL_SIZE (@var{reg})
-@findex DEPRECATED_REGISTER_VIRTUAL_SIZE
-Return the virtual size of @var{reg}; defaults to the size of the
-register's virtual type.
-Return the virtual size of @var{reg}.
-@xref{Target Architecture Definition, , Raw and Virtual Register Representations}.
-
-@item DEPRECATED_REGISTER_VIRTUAL_TYPE (@var{reg})
-@findex REGISTER_VIRTUAL_TYPE
-Return the virtual type of @var{reg}.
-@xref{Target Architecture Definition, , Raw and Virtual Register Representations}.
-
@item struct type *register_type (@var{gdbarch}, @var{reg})
@findex register_type
-If defined, return the type of register @var{reg}. This function
-superseeds @code{DEPRECATED_REGISTER_VIRTUAL_TYPE}. @xref{Target Architecture
-Definition, , Raw and Virtual Register Representations}.
+If defined, return the type of register @var{reg}.
+@xref{Target Architecture Definition, , Raw and Virtual Register
+Representations}.
@item REGISTER_CONVERT_TO_VIRTUAL(@var{reg}, @var{type}, @var{from}, @var{to})
@findex REGISTER_CONVERT_TO_VIRTUAL
Define this as 1 if the target does not have a hardware single-step
mechanism. The macro @code{SOFTWARE_SINGLE_STEP} must also be defined.
-@item SOFTWARE_SINGLE_STEP(@var{signal}, @var{insert_breapoints_p})
+@item SOFTWARE_SINGLE_STEP(@var{signal}, @var{insert_breakpoints_p})
@findex SOFTWARE_SINGLE_STEP
A function that inserts or removes (depending on
-@var{insert_breapoints_p}) breakpoints at each possible destinations of
+@var{insert_breakpoints_p}) breakpoints at each possible destinations of
the next instruction. See @file{sparc-tdep.c} and @file{rs6000-tdep.c}
for examples.
-@item SOFUN_ADDRESS_MAYBE_MISSING
-@findex SOFUN_ADDRESS_MAYBE_MISSING
+@item set_gdbarch_sofun_address_maybe_missing (@var{gdbarch}, @var{set})
+@findex set_gdbarch_sofun_address_maybe_missing
Somebody clever observed that, the more actual addresses you have in the
debug information, the more time the linker has to spend relocating
them. So whenever there's some other way the debugger could find the
address it needs, you should omit it from the debug info, to make
linking faster.
-@code{SOFUN_ADDRESS_MAYBE_MISSING} indicates that a particular set of
-hacks of this sort are in use, affecting @code{N_SO} and @code{N_FUN}
-entries in stabs-format debugging information. @code{N_SO} stabs mark
-the beginning and ending addresses of compilation units in the text
-segment. @code{N_FUN} stabs mark the starts and ends of functions.
+Calling @code{set_gdbarch_sofun_address_maybe_missing} with a non-zero
+argument @var{set} indicates that a particular set of hacks of this sort
+are in use, affecting @code{N_SO} and @code{N_FUN} entries in stabs-format
+debugging information. @code{N_SO} stabs mark the beginning and ending
+addresses of compilation units in the text segment. @code{N_FUN} stabs
+mark the starts and ends of functions.
-@code{SOFUN_ADDRESS_MAYBE_MISSING} means two things:
+In this case, @value{GDBN} assumes two things:
@itemize @bullet
@item
-@code{N_FUN} stabs have an address of zero. Instead, you should find the
-addresses where the function starts by taking the function name from
-the stab, and then looking that up in the minsyms (the
-linker/assembler symbol table). In other words, the stab has the
-name, and the linker/assembler symbol table is the only place that carries
-the address.
+@code{N_FUN} stabs have an address of zero. Instead of using those
+addresses, you should find the address where the function starts by
+taking the function name from the stab, and then looking that up in the
+minsyms (the linker/assembler symbol table). In other words, the stab
+has the name, and the linker/assembler symbol table is the only place
+that carries the address.
@item
@code{N_SO} stabs have an address of zero, too. You just look at the
-@code{N_FUN} stabs that appear before and after the @code{N_SO} stab,
-and guess the starting and ending addresses of the compilation unit from
-them.
+@code{N_FUN} stabs that appear before and after the @code{N_SO} stab, and
+guess the starting and ending addresses of the compilation unit from them.
@end itemize
-@item PC_LOAD_SEGMENT
-@findex PC_LOAD_SEGMENT
-If defined, print information about the load segment for the program
-counter. (Defined only for the RS/6000.)
-
-@item PC_REGNUM
-@findex PC_REGNUM
-If the program counter is kept in a register, then define this macro to
-be the number (greater than or equal to zero) of that register.
-
-This should only need to be defined if @code{TARGET_READ_PC} and
-@code{TARGET_WRITE_PC} are not defined.
-
-@item PARM_BOUNDARY
-@findex PARM_BOUNDARY
-If non-zero, round arguments to a boundary of this many bits before
-pushing them on the stack.
-
-@item stabs_argument_has_addr (@var{gdbarch}, @var{type})
-@findex stabs_argument_has_addr
-@findex DEPRECATED_REG_STRUCT_HAS_ADDR
-@anchor{stabs_argument_has_addr} Define this to return nonzero if a
-function argument of type @var{type} is passed by reference instead of
-value.
+@item int gdbarch_pc_regnum (@var{gdbarch})
+@findex gdbarch_pc_regnum
+If the program counter is kept in a register, then let this function return
+the number (greater than or equal to zero) of that register.
+
+This should only need to be defined if @code{gdbarch_read_pc} and
+@code{gdbarch_write_pc} are not defined.
-This method replaces @code{DEPRECATED_REG_STRUCT_HAS_ADDR}
-(@pxref{DEPRECATED_REG_STRUCT_HAS_ADDR}).
+@item int gdbarch_stabs_argument_has_addr (@var{gdbarch}, @var{type})
+@findex gdbarch_stabs_argument_has_addr
+@anchor{gdbarch_stabs_argument_has_addr} Define this function to return
+nonzero if a function argument of type @var{type} is passed by reference
+instead of value.
@item PROCESS_LINENUMBER_HOOK
@findex PROCESS_LINENUMBER_HOOK
A hook defined for XCOFF reading.
-@item PROLOGUE_FIRSTLINE_OVERLAP
-@findex PROLOGUE_FIRSTLINE_OVERLAP
-(Only used in unsupported Convex configuration.)
-
-@item PS_REGNUM
-@findex PS_REGNUM
-If defined, this is the number of the processor status register. (This
-definition is only used in generic code when parsing "$ps".)
-
-@item DEPRECATED_POP_FRAME
-@findex DEPRECATED_POP_FRAME
-@findex frame_pop
-If defined, used by @code{frame_pop} to remove a stack frame. This
-method has been superseeded by generic code.
-
-@item push_dummy_call (@var{gdbarch}, @var{function}, @var{regcache}, @var{pc_addr}, @var{nargs}, @var{args}, @var{sp}, @var{struct_return}, @var{struct_addr})
-@findex push_dummy_call
-@findex DEPRECATED_PUSH_ARGUMENTS.
-@anchor{push_dummy_call} Define this to push the dummy frame's call to
-the inferior function onto the stack. In addition to pushing
-@var{nargs}, the code should push @var{struct_addr} (when
-@var{struct_return}), and the return address (@var{bp_addr}).
+@item gdbarch_ps_regnum (@var{gdbarch}
+@findex gdbarch_ps_regnum
+If defined, this function returns the number of the processor status
+register.
+(This definition is only used in generic code when parsing "$ps".)
+
+@item CORE_ADDR gdbarch_push_dummy_call (@var{gdbarch}, @var{function}, @var{regcache}, @var{bp_addr}, @var{nargs}, @var{args}, @var{sp}, @var{struct_return}, @var{struct_addr})
+@findex gdbarch_push_dummy_call
+@anchor{gdbarch_push_dummy_call} Define this to push the dummy frame's call to
+the inferior function onto the stack. In addition to pushing @var{nargs}, the
+code should push @var{struct_addr} (when @var{struct_return} is non-zero), and
+the return address (@var{bp_addr}).
@var{function} is a pointer to a @code{struct value}; on architectures that use
function descriptors, this contains the function descriptor value.
Returns the updated top-of-stack pointer.
-This method replaces @code{DEPRECATED_PUSH_ARGUMENTS}.
-
-@item CORE_ADDR push_dummy_code (@var{gdbarch}, @var{sp}, @var{funaddr}, @var{using_gcc}, @var{args}, @var{nargs}, @var{value_type}, @var{real_pc}, @var{bp_addr})
-@findex push_dummy_code
-@anchor{push_dummy_code} Given a stack based call dummy, push the
+@item CORE_ADDR gdbarch_push_dummy_code (@var{gdbarch}, @var{sp}, @var{funaddr}, @var{using_gcc}, @var{args}, @var{nargs}, @var{value_type}, @var{real_pc}, @var{bp_addr}, @var{regcache})
+@findex gdbarch_push_dummy_code
+@anchor{gdbarch_push_dummy_code} Given a stack based call dummy, push the
instruction sequence (including space for a breakpoint) to which the
called function should return.
(@pxref{frame_align}) breakpoint, @var{bp_addr} is set to the address
reserved for that breakpoint, and @var{real_pc} set to @var{funaddr}.
-This method replaces @code{CALL_DUMMY_LOCATION},
-@code{DEPRECATED_REGISTER_SIZE}.
-
-@item REGISTER_NAME(@var{i})
-@findex REGISTER_NAME
-Return the name of register @var{i} as a string. May return @code{NULL}
-or @code{NUL} to indicate that register @var{i} is not valid.
-
-@item DEPRECATED_REG_STRUCT_HAS_ADDR (@var{gcc_p}, @var{type})
-@findex DEPRECATED_REG_STRUCT_HAS_ADDR
-@anchor{DEPRECATED_REG_STRUCT_HAS_ADDR}Define this to return 1 if the
-given type will be passed by pointer rather than directly.
+This method replaces @w{@code{gdbarch_call_dummy_location (@var{gdbarch})}}.
-This method has been replaced by @code{stabs_argument_has_addr}
-(@pxref{stabs_argument_has_addr}).
+@item const char *gdbarch_register_name (@var{gdbarch}, @var{regnr})
+@findex gdbarch_register_name
+Return the name of register @var{regnr} as a string. May return @code{NULL}
+to indicate that @var{regnr} is not a valid register.
-@item SAVE_DUMMY_FRAME_TOS (@var{sp})
-@findex SAVE_DUMMY_FRAME_TOS
-@anchor{SAVE_DUMMY_FRAME_TOS} Used in @samp{call_function_by_hand} to
-notify the target dependent code of the top-of-stack value that will be
-passed to the the inferior code. This is the value of the @code{SP}
-after both the dummy frame and space for parameters/results have been
-allocated on the stack. @xref{unwind_dummy_id}.
-
-@item SDB_REG_TO_REGNUM
-@findex SDB_REG_TO_REGNUM
-Define this to convert sdb register numbers into @value{GDBN} regnums. If not
-defined, no conversion will be done.
+@item int gdbarch_sdb_reg_to_regnum (@var{gdbarch}, @var{sdb_regnr})
+@findex gdbarch_sdb_reg_to_regnum
+Use this function to convert sdb register @var{sdb_regnr} into @value{GDBN}
+regnum. If not defined, no conversion will be done.
@item enum return_value_convention gdbarch_return_value (struct gdbarch *@var{gdbarch}, struct type *@var{valtype}, struct regcache *@var{regcache}, void *@var{readbuf}, const void *@var{writebuf})
@findex gdbarch_return_value
@var{readbuf} (@var{regcache} contains a copy of the registers from the
just returned function).
-@xref{DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS}, for a description of how
-return-values that use the struct convention are handled.
-
@emph{Maintainer note: This method replaces separate predicate, extract,
store methods. By having only one method, the logic needed to determine
the return-value convention need only be implemented in one place. If
parameter, and such a parameter should not be added. If an architecture
that requires per-compiler or per-function information be identified,
then the replacement of @var{rettype} with @code{struct value}
-@var{function} should be persued.}
+@var{function} should be pursued.}
@emph{Maintainer note: The @var{regcache} parameter limits this methods
to the inner most frame. While replacing @var{regcache} with a
@code{struct frame_info} @var{frame} parameter would remove that
limitation there has yet to be a demonstrated need for such a change.}
-@item SKIP_PERMANENT_BREAKPOINT
-@findex SKIP_PERMANENT_BREAKPOINT
+@item void gdbarch_skip_permanent_breakpoint (@var{gdbarch}, @var{regcache})
+@findex gdbarch_skip_permanent_breakpoint
Advance the inferior's PC past a permanent breakpoint. @value{GDBN} normally
steps over a breakpoint by removing it, stepping one instruction, and
re-inserting the breakpoint. However, permanent breakpoints are
hardwired into the inferior, and can't be removed, so this strategy
-doesn't work. Calling @code{SKIP_PERMANENT_BREAKPOINT} adjusts the processor's
-state so that execution will resume just after the breakpoint. This
-macro does the right thing even when the breakpoint is in the delay slot
+doesn't work. Calling @code{gdbarch_skip_permanent_breakpoint} adjusts the
+processor's state so that execution will resume just after the breakpoint.
+This function does the right thing even when the breakpoint is in the delay slot
of a branch or jump.
-@item SKIP_PROLOGUE (@var{pc})
-@findex SKIP_PROLOGUE
-A C expression that returns the address of the ``real'' code beyond the
-function entry prologue found at @var{pc}.
+@item CORE_ADDR gdbarch_skip_prologue (@var{gdbarch}, @var{ip})
+@findex gdbarch_skip_prologue
+A function that returns the address of the ``real'' code beyond the
+function entry prologue found at @var{ip}.
-@item SKIP_TRAMPOLINE_CODE (@var{pc})
-@findex SKIP_TRAMPOLINE_CODE
+@item CORE_ADDR gdbarch_skip_trampoline_code (@var{gdbarch}, @var{frame}, @var{pc})
+@findex gdbarch_skip_trampoline_code
If the target machine has trampoline code that sits between callers and
-the functions being called, then define this macro to return a new PC
+the functions being called, then define this function to return a new PC
that is at the start of the real function.
-@item SP_REGNUM
-@findex SP_REGNUM
-If the stack-pointer is kept in a register, then define this macro to be
+@item int gdbarch_sp_regnum (@var{gdbarch})
+@findex gdbarch_sp_regnum
+If the stack-pointer is kept in a register, then use this function to return
the number (greater than or equal to zero) of that register, or -1 if
there is no such register.
-@item STAB_REG_TO_REGNUM
-@findex STAB_REG_TO_REGNUM
-Define this to convert stab register numbers (as gotten from `r'
-declarations) into @value{GDBN} regnums. If not defined, no conversion will be
-done.
-
-@item DEPRECATED_STACK_ALIGN (@var{addr})
-@anchor{DEPRECATED_STACK_ALIGN}
-@findex DEPRECATED_STACK_ALIGN
-Define this to increase @var{addr} so that it meets the alignment
-requirements for the processor's stack.
+@item int gdbarch_deprecated_fp_regnum (@var{gdbarch})
+@findex gdbarch_deprecated_fp_regnum
+If the frame pointer is in a register, use this function to return the
+number of that register.
-Unlike @ref{frame_align}, this function always adjusts @var{addr}
-upwards.
-
-By default, no stack alignment is performed.
-
-@item STEP_SKIPS_DELAY (@var{addr})
-@findex STEP_SKIPS_DELAY
-Define this to return true if the address is of an instruction with a
-delay slot. If a breakpoint has been placed in the instruction's delay
-slot, @value{GDBN} will single-step over that instruction before resuming
-normally. Currently only defined for the Mips.
-
-@item STORE_RETURN_VALUE (@var{type}, @var{regcache}, @var{valbuf})
-@findex STORE_RETURN_VALUE
-A C expression that writes the function return value, found in
-@var{valbuf}, into the @var{regcache}. @var{type} is the type of the
-value that is to be returned.
-
-This method has been deprecated in favour of @code{gdbarch_return_value}
-(@pxref{gdbarch_return_value}).
+@item int gdbarch_stab_reg_to_regnum (@var{gdbarch}, @var{stab_regnr})
+@findex gdbarch_stab_reg_to_regnum
+Use this function to convert stab register @var{stab_regnr} into @value{GDBN}
+regnum. If not defined, no conversion will be done.
@item SYMBOL_RELOADING_DEFAULT
@findex SYMBOL_RELOADING_DEFAULT
@findex TARGET_CHAR_BIT
Number of bits in a char; defaults to 8.
-@item TARGET_CHAR_SIGNED
-@findex TARGET_CHAR_SIGNED
+@item int gdbarch_char_signed (@var{gdbarch})
+@findex gdbarch_char_signed
Non-zero if @code{char} is normally signed on this architecture; zero if
it should be unsigned.
Most compilers treat @code{char} as signed, but @code{char} is unsigned
on the IBM S/390, RS6000, and PowerPC targets.
-@item TARGET_COMPLEX_BIT
-@findex TARGET_COMPLEX_BIT
-Number of bits in a complex number; defaults to @code{2 * TARGET_FLOAT_BIT}.
-
-At present this macro is not used.
+@item int gdbarch_double_bit (@var{gdbarch})
+@findex gdbarch_double_bit
+Number of bits in a double float; defaults to @w{@code{8 * TARGET_CHAR_BIT}}.
-@item TARGET_DOUBLE_BIT
-@findex TARGET_DOUBLE_BIT
-Number of bits in a double float; defaults to @code{8 * TARGET_CHAR_BIT}.
+@item int gdbarch_float_bit (@var{gdbarch})
+@findex gdbarch_float_bit
+Number of bits in a float; defaults to @w{@code{4 * TARGET_CHAR_BIT}}.
-@item TARGET_DOUBLE_COMPLEX_BIT
-@findex TARGET_DOUBLE_COMPLEX_BIT
-Number of bits in a double complex; defaults to @code{2 * TARGET_DOUBLE_BIT}.
+@item int gdbarch_int_bit (@var{gdbarch})
+@findex gdbarch_int_bit
+Number of bits in an integer; defaults to @w{@code{4 * TARGET_CHAR_BIT}}.
-At present this macro is not used.
+@item int gdbarch_long_bit (@var{gdbarch})
+@findex gdbarch_long_bit
+Number of bits in a long integer; defaults to @w{@code{4 * TARGET_CHAR_BIT}}.
-@item TARGET_FLOAT_BIT
-@findex TARGET_FLOAT_BIT
-Number of bits in a float; defaults to @code{4 * TARGET_CHAR_BIT}.
-
-@item TARGET_INT_BIT
-@findex TARGET_INT_BIT
-Number of bits in an integer; defaults to @code{4 * TARGET_CHAR_BIT}.
-
-@item TARGET_LONG_BIT
-@findex TARGET_LONG_BIT
-Number of bits in a long integer; defaults to @code{4 * TARGET_CHAR_BIT}.
-
-@item TARGET_LONG_DOUBLE_BIT
-@findex TARGET_LONG_DOUBLE_BIT
+@item int gdbarch_long_double_bit (@var{gdbarch})
+@findex gdbarch_long_double_bit
Number of bits in a long double float;
-defaults to @code{2 * TARGET_DOUBLE_BIT}.
-
-@item TARGET_LONG_LONG_BIT
-@findex TARGET_LONG_LONG_BIT
-Number of bits in a long long integer; defaults to @code{2 * TARGET_LONG_BIT}.
-
-@item TARGET_PTR_BIT
-@findex TARGET_PTR_BIT
-Number of bits in a pointer; defaults to @code{TARGET_INT_BIT}.
-
-@item TARGET_SHORT_BIT
-@findex TARGET_SHORT_BIT
-Number of bits in a short integer; defaults to @code{2 * TARGET_CHAR_BIT}.
-
-@item TARGET_READ_PC
-@findex TARGET_READ_PC
-@itemx TARGET_WRITE_PC (@var{val}, @var{pid})
-@findex TARGET_WRITE_PC
-@anchor{TARGET_WRITE_PC}
+defaults to @w{@code{2 * gdbarch_double_bit (@var{gdbarch})}}.
+
+@item int gdbarch_long_long_bit (@var{gdbarch})
+@findex gdbarch_long_long_bit
+Number of bits in a long long integer; defaults to
+@w{@code{2 * gdbarch_long_bit (@var{gdbarch})}}.
+
+@item int gdbarch_ptr_bit (@var{gdbarch})
+@findex gdbarch_ptr_bit
+Number of bits in a pointer; defaults to
+@w{@code{gdbarch_int_bit (@var{gdbarch})}}.
+
+@item int gdbarch_short_bit (@var{gdbarch})
+@findex gdbarch_short_bit
+Number of bits in a short integer; defaults to @w{@code{2 * TARGET_CHAR_BIT}}.
+
+@item CORE_ADDR gdbarch_read_pc (@var{gdbarch}, @var{regcache})
+@findex gdbarch_read_pc
+@itemx gdbarch_write_pc (@var{gdbarch}, @var{regcache}, @var{val})
+@findex gdbarch_write_pc
+@anchor{gdbarch_write_pc}
@itemx TARGET_READ_SP
@findex TARGET_READ_SP
@itemx TARGET_READ_FP
@findex TARGET_READ_FP
-@findex read_pc
-@findex write_pc
+@findex gdbarch_read_pc
+@findex gdbarch_write_pc
@findex read_sp
@findex read_fp
-@anchor{TARGET_READ_SP} These change the behavior of @code{read_pc},
-@code{write_pc}, and @code{read_sp}. For most targets, these may be
+@anchor{TARGET_READ_SP} These change the behavior of @code{gdbarch_read_pc},
+@code{gdbarch_write_pc}, and @code{read_sp}. For most targets, these may be
left undefined. @value{GDBN} will call the read and write register
functions with the relevant @code{_REGNUM} argument.
-These macros are useful when a target keeps one of these registers in a
-hard to get at place; for example, part in a segment register and part
-in an ordinary register.
+These macros and functions are useful when a target keeps one of these
+registers in a hard to get at place; for example, part in a segment register
+and part in an ordinary register.
+
+@xref{gdbarch_unwind_sp}, which replaces @code{TARGET_READ_SP}.
-@xref{unwind_sp}, which replaces @code{TARGET_READ_SP}.
+@item void gdbarch_virtual_frame_pointer (@var{gdbarch}, @var{pc}, @var{frame_regnum}, @var{frame_offset})
+@findex gdbarch_virtual_frame_pointer
+Returns a @code{(@var{register}, @var{offset})} pair representing the virtual
+frame pointer in use at the code address @var{pc}. If virtual frame
+pointers are not used, a default definition simply returns
+@code{gdbarch_deprecated_fp_regnum} (or @code{gdbarch_sp_regnum}, if
+no frame pointer is defined), with an offset of zero.
-@item TARGET_VIRTUAL_FRAME_POINTER(@var{pc}, @var{regp}, @var{offsetp})
-@findex TARGET_VIRTUAL_FRAME_POINTER
-Returns a @code{(register, offset)} pair representing the virtual frame
-pointer in use at the code address @var{pc}. If virtual frame pointers
-are not used, a default definition simply returns
-@code{DEPRECATED_FP_REGNUM}, with an offset of zero.
+@c need to explain virtual frame pointers, they are recorded in agent expressions
+@c for tracepoints
@item TARGET_HAS_HARDWARE_WATCHPOINTS
If non-zero, the target has support for hardware-assisted
watchpoints. @xref{Algorithms, watchpoints}, for more details and
other related macros.
-@item TARGET_PRINT_INSN (@var{addr}, @var{info})
-@findex TARGET_PRINT_INSN
+@item int gdbarch_print_insn (@var{gdbarch}, @var{vma}, @var{info})
+@findex gdbarch_print_insn
This is the function used by @value{GDBN} to print an assembly
-instruction. It prints the instruction at address @var{addr} in
-debugged memory and returns the length of the instruction, in bytes. If
-a target doesn't define its own printing routine, it defaults to an
-accessor function for the global pointer
-@code{deprecated_tm_print_insn}. This usually points to a function in
-the @code{opcodes} library (@pxref{Support Libraries, ,Opcodes}).
-@var{info} is a structure (of type @code{disassemble_info}) defined in
-@file{include/dis-asm.h} used to pass information to the instruction
-decoding routine.
-
-@item struct frame_id unwind_dummy_id (struct frame_info *@var{frame})
-@findex unwind_dummy_id
-@anchor{unwind_dummy_id} Given @var{frame} return a @code{struct
-frame_id} that uniquely identifies an inferior function call's dummy
+instruction. It prints the instruction at address @var{vma} in
+debugged memory and returns the length of the instruction, in bytes.
+This usually points to a function in the @code{opcodes} library
+(@pxref{Support Libraries, ,Opcodes}). @var{info} is a structure (of
+type @code{disassemble_info}) defined in the header file
+@file{include/dis-asm.h}, and used to pass information to the
+instruction decoding routine.
+
+@item frame_id gdbarch_dummy_id (@var{gdbarch}, @var{frame})
+@findex gdbarch_dummy_id
+@anchor{gdbarch_dummy_id} Given @var{frame} return a @w{@code{struct
+frame_id}} that uniquely identifies an inferior function call's dummy
frame. The value returned must match the dummy frame stack value
-previously saved using @code{SAVE_DUMMY_FRAME_TOS}.
-@xref{SAVE_DUMMY_FRAME_TOS}.
-
-@item DEPRECATED_USE_STRUCT_CONVENTION (@var{gcc_p}, @var{type})
-@findex DEPRECATED_USE_STRUCT_CONVENTION
-If defined, this must be an expression that is nonzero if a value of the
-given @var{type} being returned from a function must have space
-allocated for it on the stack. @var{gcc_p} is true if the function
-being considered is known to have been compiled by GCC; this is helpful
-for systems where GCC is known to use different calling convention than
-other compilers.
-
-This method has been deprecated in favour of @code{gdbarch_return_value}
-(@pxref{gdbarch_return_value}).
-
-@item VALUE_TO_REGISTER(@var{type}, @var{regnum}, @var{from}, @var{to})
-@findex VALUE_TO_REGISTER
-Convert a value of type @var{type} into the raw contents of register
-@var{regnum}'s.
+previously saved by @code{call_function_by_hand}.
+
+@item void gdbarch_value_to_register (@var{gdbarch}, @var{frame}, @var{type}, @var{buf})
+@findex gdbarch_value_to_register
+Convert a value of type @var{type} into the raw contents of a register.
@xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}.
-@item VARIABLES_INSIDE_BLOCK (@var{desc}, @var{gcc_p})
-@findex VARIABLES_INSIDE_BLOCK
-For dbx-style debugging information, if the compiler puts variable
-declarations inside LBRAC/RBRAC blocks, this should be defined to be
-nonzero. @var{desc} is the value of @code{n_desc} from the
-@code{N_RBRAC} symbol, and @var{gcc_p} is true if @value{GDBN} has noticed the
-presence of either the @code{GCC_COMPILED_SYMBOL} or the
-@code{GCC2_COMPILED_SYMBOL}. By default, this is 0.
-
-@item OS9K_VARIABLES_INSIDE_BLOCK (@var{desc}, @var{gcc_p})
-@findex OS9K_VARIABLES_INSIDE_BLOCK
-Similarly, for OS/9000. Defaults to 1.
@end table
Motorola M68K target conditionals.
@item REMOTE_BPT_VECTOR
Defaults to @code{1}.
-@item NAME_OF_MALLOC
-@findex NAME_OF_MALLOC
-A string containing the name of the function to call in order to
-allocate some memory in the inferior. The default value is "malloc".
-
@end ftable
+@node Adding a New Target
@section Adding a New Target
@cindex adding a target
The following files add a target to @value{GDBN}:
@table @file
-@vindex TDEPFILES
-@item gdb/config/@var{arch}/@var{ttt}.mt
-Contains a Makefile fragment specific to this target. Specifies what
-object files are needed for target @var{ttt}, by defining
-@samp{TDEPFILES=@dots{}} and @samp{TDEPLIBS=@dots{}}. Also specifies
-the header file which describes @var{ttt}, by defining @samp{TM_FILE=
-tm-@var{ttt}.h}.
-
-You can also define @samp{TM_CFLAGS}, @samp{TM_CLIBS}, @samp{TM_CDEPS},
-but these are now deprecated, replaced by autoconf, and may go away in
-future versions of @value{GDBN}.
+@cindex target dependent files
@item gdb/@var{ttt}-tdep.c
Contains any miscellaneous code required for this target machine. On
-some machines it doesn't exist at all. Sometimes the macros in
-@file{tm-@var{ttt}.h} become very complicated, so they are implemented
-as functions here instead, and the macro is simply defined to call the
-function. This is vastly preferable, since it is easier to understand
-and debug.
+some machines it doesn't exist at all.
@item gdb/@var{arch}-tdep.c
@itemx gdb/@var{arch}-tdep.h
-This often exists to describe the basic layout of the target machine's
-processor chip (registers, stack, etc.). If used, it is included by
-@file{@var{ttt}-tdep.h}. It can be shared among many targets that use
-the same processor.
-
-@item gdb/config/@var{arch}/tm-@var{ttt}.h
-(@file{tm.h} is a link to this file, created by @code{configure}). Contains
-macro definitions about the target machine's registers, stack frame
-format and instructions.
-
-New targets do not need this file and should not create it.
-
-@item gdb/config/@var{arch}/tm-@var{arch}.h
-This often exists to describe the basic layout of the target machine's
-processor chip (registers, stack, etc.). If used, it is included by
-@file{tm-@var{ttt}.h}. It can be shared among many targets that use the
-same processor.
-
-New targets do not need this file and should not create it.
+This is required to describe the basic layout of the target machine's
+processor chip (registers, stack, etc.). It can be shared among many
+targets that use the same processor architecture.
@end table
-If you are adding a new operating system for an existing CPU chip, add a
-@file{config/tm-@var{os}.h} file that describes the operating system
-facilities that are unusual (extra symbol table info; the breakpoint
-instruction needed; etc.). Then write a @file{@var{arch}/tm-@var{os}.h}
-that just @code{#include}s @file{tm-@var{arch}.h} and
-@file{config/tm-@var{os}.h}.
+(Target header files such as
+@file{gdb/config/@var{arch}/tm-@var{ttt}.h},
+@file{gdb/config/@var{arch}/tm-@var{arch}.h}, and
+@file{config/tm-@var{os}.h} are no longer used.)
+@node Target Descriptions
+@chapter Target Descriptions
+@cindex target descriptions
-@section Converting an existing Target Architecture to Multi-arch
-@cindex converting targets to multi-arch
+The target architecture definition (@pxref{Target Architecture Definition})
+contains @value{GDBN}'s hard-coded knowledge about an architecture. For
+some platforms, it is handy to have more flexible knowledge about a specific
+instance of the architecture---for instance, a processor or development board.
+@dfn{Target descriptions} provide a mechanism for the user to tell @value{GDBN}
+more about what their target supports, or for the target to tell @value{GDBN}
+directly.
-This section describes the current accepted best practice for converting
-an existing target architecture to the multi-arch framework.
+For details on writing, automatically supplying, and manually selecting
+target descriptions, see @ref{Target Descriptions, , , gdb,
+Debugging with @value{GDBN}}. This section will cover some related
+topics about the @value{GDBN} internals.
-The process consists of generating, testing, posting and committing a
-sequence of patches. Each patch must contain a single change, for
-instance:
+@menu
+* Target Descriptions Implementation::
+* Adding Target Described Register Support::
+@end menu
-@itemize @bullet
+@node Target Descriptions Implementation
+@section Target Descriptions Implementation
+@cindex target descriptions, implementation
+
+Before @value{GDBN} connects to a new target, or runs a new program on
+an existing target, it discards any existing target description and
+reverts to a default gdbarch. Then, after connecting, it looks for a
+new target description by calling @code{target_find_description}.
+
+A description may come from a user specified file (XML), the remote
+@samp{qXfer:features:read} packet (also XML), or from any custom
+@code{to_read_description} routine in the target vector. For instance,
+the remote target supports guessing whether a MIPS target is 32-bit or
+64-bit based on the size of the @samp{g} packet.
+
+If any target description is found, @value{GDBN} creates a new gdbarch
+incorporating the description by calling @code{gdbarch_update_p}. Any
+@samp{<architecture>} element is handled first, to determine which
+architecture's gdbarch initialization routine is called to create the
+new architecture. Then the initialization routine is called, and has
+a chance to adjust the constructed architecture based on the contents
+of the target description. For instance, it can recognize any
+properties set by a @code{to_read_description} routine. Also
+see @ref{Adding Target Described Register Support}.
+
+@node Adding Target Described Register Support
+@section Adding Target Described Register Support
+@cindex target descriptions, adding register support
+
+Target descriptions can report additional registers specific to an
+instance of the target. But it takes a little work in the architecture
+specific routines to support this.
+
+A target description must either have no registers or a complete
+set---this avoids complexity in trying to merge standard registers
+with the target defined registers. It is the architecture's
+responsibility to validate that a description with registers has
+everything it needs. To keep architecture code simple, the same
+mechanism is used to assign fixed internal register numbers to
+standard registers.
+
+If @code{tdesc_has_registers} returns 1, the description contains
+registers. The architecture's @code{gdbarch_init} routine should:
-@item
-Directly convert a group of functions into macros (the conversion does
-not change the behavior of any of the functions).
+@itemize @bullet
@item
-Replace a non-multi-arch with a multi-arch mechanism (e.g.,
-@code{FRAME_INFO}).
+Call @code{tdesc_data_alloc} to allocate storage, early, before
+searching for a matching gdbarch or allocating a new one.
@item
-Enable multi-arch level one.
+Use @code{tdesc_find_feature} to locate standard features by name.
@item
-Delete one or more files.
-
-@end itemize
-
-@noindent
-There isn't a size limit on a patch, however, a developer is strongly
-encouraged to keep the patch size down.
-
-Since each patch is well defined, and since each change has been tested
-and shows no regressions, the patches are considered @emph{fairly}
-obvious. Such patches, when submitted by developers listed in the
-@file{MAINTAINERS} file, do not need approval. Occasional steps in the
-process may be more complicated and less clear. The developer is
-expected to use their judgment and is encouraged to seek advice as
-needed.
-
-@subsection Preparation
-
-The first step is to establish control. Build (with @option{-Werror}
-enabled) and test the target so that there is a baseline against which
-the debugger can be compared.
-
-At no stage can the test results regress or @value{GDBN} stop compiling
-with @option{-Werror}.
-
-@subsection Add the multi-arch initialization code
-
-The objective of this step is to establish the basic multi-arch
-framework. It involves
-
-@itemize @bullet
+Use @code{tdesc_numbered_register} and @code{tdesc_numbered_register_choices}
+to locate the expected registers in the standard features.
@item
-The addition of a @code{@var{arch}_gdbarch_init} function@footnote{The
-above is from the original example and uses K&R C. @value{GDBN}
-has since converted to ISO C but lets ignore that.} that creates
-the architecture:
-@smallexample
-static struct gdbarch *
-d10v_gdbarch_init (info, arches)
- struct gdbarch_info info;
- struct gdbarch_list *arches;
-@{
- struct gdbarch *gdbarch;
- /* there is only one d10v architecture */
- if (arches != NULL)
- return arches->gdbarch;
- gdbarch = gdbarch_alloc (&info, NULL);
- return gdbarch;
-@}
-@end smallexample
-@noindent
-@emph{}
+Return @code{NULL} if a required feature is missing, or if any standard
+feature is missing expected registers. This will produce a warning that
+the description was incomplete.
@item
-A per-architecture dump function to print any architecture specific
-information:
-@smallexample
-static void
-mips_dump_tdep (struct gdbarch *current_gdbarch,
- struct ui_file *file)
-@{
- @dots{} code to print architecture specific info @dots{}
-@}
-@end smallexample
+Free the allocated data before returning, unless @code{tdesc_use_registers}
+is called.
@item
-A change to @code{_initialize_@var{arch}_tdep} to register this new
-architecture:
-@smallexample
-void
-_initialize_mips_tdep (void)
-@{
- gdbarch_register (bfd_arch_mips, mips_gdbarch_init,
- mips_dump_tdep);
-@end smallexample
+Call @code{set_gdbarch_num_regs} as usual, with a number higher than any
+fixed number passed to @code{tdesc_numbered_register}.
@item
-Add the macro @code{GDB_MULTI_ARCH}, defined as 0 (zero), to the file@*
-@file{config/@var{arch}/tm-@var{arch}.h}.
+Call @code{tdesc_use_registers} after creating a new gdbarch, before
+returning it.
@end itemize
-@subsection Update multi-arch incompatible mechanisms
-
-Some mechanisms do not work with multi-arch. They include:
-
-@table @code
-@item FRAME_FIND_SAVED_REGS
-Replaced with @code{DEPRECATED_FRAME_INIT_SAVED_REGS}
-@end table
-
-@noindent
-At this stage you could also consider converting the macros into
-functions.
-
-@subsection Prepare for multi-arch level to one
-
-Temporally set @code{GDB_MULTI_ARCH} to @code{GDB_MULTI_ARCH_PARTIAL}
-and then build and start @value{GDBN} (the change should not be
-committed). @value{GDBN} may not build, and once built, it may die with
-an internal error listing the architecture methods that must be
-provided.
+After @code{tdesc_use_registers} has been called, the architecture's
+@code{register_name}, @code{register_type}, and @code{register_reggroup_p}
+routines will not be called; that information will be taken from
+the target description. @code{num_regs} may be increased to account
+for any additional registers in the description.
-Fix any build problems (patch(es)).
+Pseudo-registers require some extra care:
-Convert all the architecture methods listed, which are only macros, into
-functions (patch(es)).
-
-Update @code{@var{arch}_gdbarch_init} to set all the missing
-architecture methods and wrap the corresponding macros in @code{#if
-!GDB_MULTI_ARCH} (patch(es)).
-
-@subsection Set multi-arch level one
-
-Change the value of @code{GDB_MULTI_ARCH} to GDB_MULTI_ARCH_PARTIAL (a
-single patch).
-
-Any problems with throwing ``the switch'' should have been fixed
-already.
-
-@subsection Convert remaining macros
-
-Suggest converting macros into functions (and setting the corresponding
-architecture method) in small batches.
-
-@subsection Set multi-arch level to two
+@itemize @bullet
-This should go smoothly.
+@item
+Using @code{tdesc_numbered_register} allows the architecture to give
+constant register numbers to standard architectural registers, e.g.@:
+as an @code{enum} in @file{@var{arch}-tdep.h}. But because
+pseudo-registers are always numbered above @code{num_regs},
+which may be increased by the description, constant numbers
+can not be used for pseudos. They must be numbered relative to
+@code{num_regs} instead.
-@subsection Delete the TM file
+@item
+The description will not describe pseudo-registers, so the
+architecture must call @code{set_tdesc_pseudo_register_name},
+@code{set_tdesc_pseudo_register_type}, and
+@code{set_tdesc_pseudo_register_reggroup_p} to supply routines
+describing pseudo registers. These routines will be passed
+internal register numbers, so the same routines used for the
+gdbarch equivalents are usually suitable.
-The @file{tm-@var{arch}.h} can be deleted. @file{@var{arch}.mt} and
-@file{configure.in} updated.
+@end itemize
@node Target Vector Definition
stack), active but not running (pushed, but not connected to a fully
manifested inferior), or completely active (pushed, with an accessible
inferior). Most targets are only completely inactive or completely
-active, but some support persistant connections to a target even
+active, but some support persistent connections to a target even
when the target has exited or not yet started.
For example, connecting to the simulator using @code{target sim} does
@value{GDBN}'s file @file{remote.c} talks a serial protocol to code
that runs in the target system. @value{GDBN} provides several sample
@dfn{stubs} that can be integrated into target programs or operating
-systems for this purpose; they are named @file{*-stub.c}.
+systems for this purpose; they are named @file{@var{cpu}-stub.c}. Many
+operating systems, embedded targets, emulators, and simulators already
+have a GDB stub built into them, and maintenance of the remote
+protocol must be careful to preserve compatibility.
The @value{GDBN} user's manual describes how to put such a stub into
your target code. What follows is a discussion of integrating the
Also specifies the header file which describes native support on
@var{xyz}, by defining @samp{NAT_FILE= nm-@var{xyz}.h}. You can also
define @samp{NAT_CFLAGS}, @samp{NAT_ADD_FILES}, @samp{NAT_CLIBS},
-@samp{NAT_CDEPS}, etc.; see @file{Makefile.in}.
+@samp{NAT_CDEPS}, @samp{NAT_GENERATED_FILES}, etc.; see @file{Makefile.in}.
@emph{Maintainer's note: The @file{.mh} suffix is because this file
originally contained @file{Makefile} fragments for hosting @value{GDBN}
@table @code
-@item CHILD_PREPARE_TO_STORE
-@findex CHILD_PREPARE_TO_STORE
-If the machine stores all registers at once in the child process, then
-define this to ensure that all values are correct. This usually entails
-a read from the child.
-
-[Note that this is incorrectly defined in @file{xm-@var{system}.h} files
-currently.]
-
-@item FETCH_INFERIOR_REGISTERS
-@findex FETCH_INFERIOR_REGISTERS
-Define this if the native-dependent code will provide its own routines
-@code{fetch_inferior_registers} and @code{store_inferior_registers} in
-@file{@var{host}-nat.c}. If this symbol is @emph{not} defined, and
-@file{infptrace.c} is included in this configuration, the default
-routines in @file{infptrace.c} are used for these functions.
-
-@item FP0_REGNUM
-@findex FP0_REGNUM
-This macro is normally defined to be the number of the first floating
-point register, if the machine has such registers. As such, it would
-appear only in target-specific code. However, @file{/proc} support uses this
-to decide whether floats are in use on this target.
-
-@item GET_LONGJMP_TARGET
-@findex GET_LONGJMP_TARGET
-For most machines, this is a target-dependent parameter. On the
-DECstation and the Iris, this is a native-dependent parameter, since
-@file{setjmp.h} is needed to define it.
-
-This macro determines the target PC address that @code{longjmp} will jump to,
-assuming that we have just stopped at a longjmp breakpoint. It takes a
-@code{CORE_ADDR *} as argument, and stores the target PC value through this
-pointer. It examines the current state of the machine as needed.
-
@item I386_USE_GENERIC_WATCHPOINTS
An x86-based machine can define this to use the generic x86 watchpoint
support; see @ref{Algorithms, I386_USE_GENERIC_WATCHPOINTS}.
-@item KERNEL_U_ADDR
-@findex KERNEL_U_ADDR
-Define this to the address of the @code{u} structure (the ``user
-struct'', also known as the ``u-page'') in kernel virtual memory. @value{GDBN}
-needs to know this so that it can subtract this address from absolute
-addresses in the upage, that are obtained via ptrace or from core files.
-On systems that don't need this value, set it to zero.
-
-@item KERNEL_U_ADDR_HPUX
-@findex KERNEL_U_ADDR_HPUX
-Define this to cause @value{GDBN} to determine the address of @code{u} at
-runtime, by using HP-style @code{nlist} on the kernel's image in the
-root directory.
-
-@item ONE_PROCESS_WRITETEXT
-@findex ONE_PROCESS_WRITETEXT
-Define this to be able to, when a breakpoint insertion fails, warn the
-user that another process may be running with the same executable.
-
@item PROC_NAME_FMT
@findex PROC_NAME_FMT
Defines the format for the name of a @file{/proc} device. Should be
defined in @file{nm.h} @emph{only} in order to override the default
definition in @file{procfs.c}.
-@item PTRACE_ARG3_TYPE
-@findex PTRACE_ARG3_TYPE
-The type of the third argument to the @code{ptrace} system call, if it
-exists and is different from @code{int}.
-
-@item REGISTER_U_ADDR
-@findex REGISTER_U_ADDR
-Defines the offset of the registers in the ``u area''.
-
-@item SHELL_COMMAND_CONCAT
-@findex SHELL_COMMAND_CONCAT
-If defined, is a string to prefix on the shell command used to start the
-inferior.
-
-@item SHELL_FILE
-@findex SHELL_FILE
-If defined, this is the name of the shell to use to run the inferior.
-Defaults to @code{"/bin/sh"}.
-
@item SOLIB_ADD (@var{filename}, @var{from_tty}, @var{targ}, @var{readsyms})
@findex SOLIB_ADD
Define this to expand into an expression that will cause the symbols in
number of traps is something other than 2, then define this macro to
expand into the number expected.
-@item USE_PROC_FS
-@findex USE_PROC_FS
-This determines whether small routines in @file{*-tdep.c}, which
-translate register values between @value{GDBN}'s internal
-representation and the @file{/proc} representation, are compiled.
-
-@item U_REGS_OFFSET
-@findex U_REGS_OFFSET
-This is the offset of the registers in the upage. It need only be
-defined if the generic ptrace register access routines in
-@file{infptrace.c} are being used (that is, @file{infptrace.c} is
-configured in, and @code{FETCH_INFERIOR_REGISTERS} is not defined). If
-the default value from @file{infptrace.c} is good enough, leave it
-undefined.
-
-The default value means that u.u_ar0 @emph{points to} the location of
-the registers. I'm guessing that @code{#define U_REGS_OFFSET 0} means
-that @code{u.u_ar0} @emph{is} the location of the registers.
-
-@item CLEAR_SOLIB
-@findex CLEAR_SOLIB
-See @file{objfiles.c}.
-
-@item DEBUG_PTRACE
-@findex DEBUG_PTRACE
-Define this to debug @code{ptrace} calls.
@end table
-
@node Support Libraries
@chapter Support Libraries
library because it's also used in binutils, for @file{objdump}).
@section readline
-
-@section mmalloc
+@cindex readline library
+The @code{readline} library provides a set of functions for use by applications
+that allow users to edit command lines as they are typed in.
@section libiberty
@cindex @code{libiberty} library
chunks of memory. Each obstack is a pool of memory that is managed
like a stack. Objects (of any nature, size and alignment) are
allocated and freed in a @acronym{LIFO} fashion on an obstack (see
-@code{libiberty}'s documenatation for a more detailed explanation of
+@code{libiberty}'s documentation for a more detailed explanation of
@code{obstacks}).
The most noticeable use of the @code{obstacks} in @value{GDBN} is in
these @code{obstacks}: dictionary entries, blocks, blockvectors,
symbols, minimal symbols, types, vectors of fundamental types, class
fields of types, object files section lists, object files section
-offets lists, line tables, symbol tables, partial symbol tables,
+offset lists, line tables, symbol tables, partial symbol tables,
string tables, symbol table private data, macros tables, debug
information sections and entries, import and export lists (som),
unwind information (hppa), dwarf2 location expressions data. Plus
An essential and convenient property of all data on @code{obstacks} is
that memory for it gets allocated (with @code{obstack_alloc}) at
-various times during a debugging sesssion, but it is released all at
+various times during a debugging session, but it is released all at
once using the @code{obstack_free} function. The @code{obstack_free}
function takes a pointer to where in the stack it must start the
deletion from (much like the cleanup chains have a pointer to where to
Often it is necessary to manipulate a dynamic array of a set of
objects. C forces some bookkeeping on this, which can get cumbersome
-and repetative. The @file{vec.h} file contains macros for defining
+and repetitive. The @file{vec.h} file contains macros for defining
and using a typesafe vector type. The functions defined will be
inlined when compiling, and so the abstraction cost should be zero.
Domain checks are added to detect programming errors.
@subsection Compiler Warnings
@cindex compiler warnings
-With few exceptions, developers should include the configuration option
-@samp{--enable-gdb-build-warnings=,-Werror} when building @value{GDBN}.
-The exceptions are listed in the file @file{gdb/MAINTAINERS}.
+With few exceptions, developers should avoid the configuration option
+@samp{--disable-werror} when building @value{GDBN}. The exceptions
+are listed in the file @file{gdb/MAINTAINERS}. The default, when
+building with @sc{gcc}, is @samp{--enable-werror}.
This option causes @value{GDBN} (when built using GCC) to be compiled
with a carefully selected list of compiler warning flags. Any warnings
-from those flags being treated as errors.
+from those flags are treated as errors.
The current list of warning flags includes:
@table @samp
-@item -Wimplicit
-Since @value{GDBN} coding standard requires all functions to be declared
-using a prototype, the flag has the side effect of ensuring that
-prototyped functions are always visible with out resorting to
-@samp{-Wstrict-prototypes}.
+@item -Wall
+Recommended @sc{gcc} warnings.
-@item -Wreturn-type
-Such code often appears to work except on instruction set architectures
-that use register windows.
+@item -Wdeclaration-after-statement
-@item -Wcomment
+@sc{gcc} 3.x (and later) and @sc{c99} allow declarations mixed with
+code, but @sc{gcc} 2.x and @sc{c89} do not.
-@item -Wtrigraphs
+@item -Wpointer-arith
-@item -Wformat
-@itemx -Wformat-nonliteral
+@item -Wformat-nonliteral
+Non-literal format strings, with a few exceptions, are bugs - they
+might contain unintended user-supplied format specifiers.
Since @value{GDBN} uses the @code{format printf} attribute on all
-@code{printf} like functions these check not just @code{printf} calls
+@code{printf} like functions this checks not just @code{printf} calls
but also calls to functions such as @code{fprintf_unfiltered}.
-@item -Wparentheses
-This warning includes uses of the assignment operator within an
-@code{if} statement.
-
-@item -Wpointer-arith
-
-@item -Wuninitialized
-
-@item -Wunused-label
-This warning has the additional benefit of detecting the absence of the
-@code{case} reserved word in a switch statement:
-@smallexample
-enum @{ FD_SCHEDULED, NOTHING_SCHEDULED @} sched;
-@dots{}
-switch (sched)
- @{
- case FD_SCHEDULED:
- @dots{};
- break;
- NOTHING_SCHEDULED:
- @dots{};
- break;
- @}
-@end smallexample
-
-@item -Wunused-function
-
@item -Wno-pointer-sign
In version 4.0, GCC began warning about pointer argument passing or
assignment even when the source and destination differed only in
the @value{GDBN} developers decided correcting these warnings wasn't
worth the time it would take.
-@end table
-
-@emph{Pragmatics: Due to the way that @value{GDBN} is implemented most
-functions have unused parameters. Consequently the warning
-@samp{-Wunused-parameter} is precluded from the list. The macro
+@item -Wno-unused-parameter
+Due to the way that @value{GDBN} is implemented many functions have
+unused parameters. Consequently this warning is avoided. The macro
@code{ATTRIBUTE_UNUSED} is not used as it leads to false negatives ---
it is not an error to have @code{ATTRIBUTE_UNUSED} on a parameter that
-is being used. The options @samp{-Wall} and @samp{-Wunused} are also
-precluded because they both include @samp{-Wunused-parameter}.}
+is being used.
-@emph{Pragmatics: @value{GDBN} has not simply accepted the warnings
-enabled by @samp{-Wall -Werror -W...}. Instead it is selecting warnings
-when and where their benefits can be demonstrated.}
+@item -Wno-unused
+@itemx -Wno-switch
+@itemx -Wno-char-subscripts
+These are warnings which might be useful for @value{GDBN}, but are
+currently too noisy to enable with @samp{-Werror}.
+
+@end table
@subsection Formatting
To avoid version conflicts, vendors are expected to modify the file
@file{gdb/version.in} to include a vendor unique alphabetic identifier
(an official @value{GDBN} release never uses alphabetic characters in
-its version identifer). E.g., @samp{6.2widgit2}, or @samp{6.2 (Widgit
+its version identifier). E.g., @samp{6.2widgit2}, or @samp{6.2 (Widgit
Inc Patch 2)}.
@section Experimental Branches
left-margin: 8
fill-column: 74
version-control: never
+coding: utf-8
End:
@end smallexample
@item
Update the copyright year in the startup message
-Update the copyright year in file @file{top.c}, function
-@code{print_gdb_version}.
+Update the copyright year in:
+@itemize @bullet
+@item file @file{top.c}, function @code{print_gdb_version}
+@item file @file{gdbserver/server.c}, function @code{gdbserver_version}
+@item file @file{gdbserver/gdbreplay.c}, function @code{gdbreplay_version}
+@end itemize
+
+@item
+Add the new year in the copyright notices of all source and documentation
+files. This can be done semi-automatically by running the @code{copyright.sh}
+script. This script requires Emacs 22 or later to be installed.
+
@end itemize
@node Releasing GDB
@item
@email{gdb-announce@@sources.redhat.com, GDB Announcement mailing list}
@item
-@email{gdb@@sources.redhat.com, GDB Discsussion mailing list} and
-@email{gdb-testers@@sources.redhat.com, GDB Discsussion mailing list}
+@email{gdb@@sources.redhat.com, GDB Discussion mailing list} and
+@email{gdb-testers@@sources.redhat.com, GDB Testers mailing list}
@end itemize
@emph{Pragmatics: The branch creation is sent to the announce list to
@emph{Don't worry about the @file{gdb.info-??} or
@file{gdb/p-exp.tab.c}. They were generated (and yes @file{gdb.info-1}
was also generated only something strange with CVS means that they
-didn't get supressed). Fixing it would be nice though.}
+didn't get suppressed). Fixing it would be nice though.}
@subsubheading Create compressed versions of the release
calls @code{gdb_test} multiple times.
Only use @code{send_gdb} and @code{gdb_expect} when absolutely
-necessary, such as when @value{GDBN} has several valid responses to a command.
+necessary. Even if @value{GDBN} has several valid responses to
+a command, you can use @code{gdb_test_multiple}. Like @code{gdb_test},
+@code{gdb_test_multiple} recognizes internal errors and unexpected
+prompts.
+
+Do not write tests which expect a literal tab character from @value{GDBN}.
+On some operating systems (e.g.@: OpenBSD) the TTY layer expands tabs to
+spaces, so by the time @value{GDBN}'s output reaches expect the tab is gone.
The source language programs do @emph{not} need to be in a consistent
style. Since @value{GDBN} is used to debug programs written in many different
Please send patches directly to
@email{gdb-patches@@sources.redhat.com, the @value{GDBN} maintainers}.
-@section Obsolete Conditionals
-@cindex obsolete code
+@section Build Script
-Fragments of old code in @value{GDBN} sometimes reference or set the following
-configuration macros. They should not be used by new code, and old uses
-should be removed as those parts of the debugger are otherwise touched.
+@cindex build script
-@table @code
-@item STACK_END_ADDR
-This macro used to define where the end of the stack appeared, for use
-in interpreting core file formats that don't record this address in the
-core file itself. This information is now configured in BFD, and @value{GDBN}
-gets the info portably from there. The values in @value{GDBN}'s configuration
-files should be moved into BFD configuration files (if needed there),
-and deleted from all of @value{GDBN}'s config files.
+The script @file{gdb_buildall.sh} builds @value{GDBN} with flag
+@option{--enable-targets=all} set. This builds @value{GDBN} with all supported
+targets activated. This helps testing @value{GDBN} when doing changes that
+affect more than one architecture and is much faster than using
+@file{gdb_mbuild.sh}.
-Any @file{@var{foo}-xdep.c} file that references STACK_END_ADDR
-is so old that it has never been converted to use BFD. Now that's old!
-
-@end table
+After building @value{GDBN} the script checks which architectures are
+supported and then switches the current architecture to each of those to get
+information about the architecture. The test results are stored in log files
+in the directory the script was called from.
@include observer.texi
@raisesections