/* Code dealing with dummy stack frames, for GDB, the GNU debugger.
- Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994,
- 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free
- Software Foundation, Inc.
+ Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2007
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "frame-unwind.h"
#include "command.h"
#include "gdbcmd.h"
-
-static void dummy_frame_this_id (struct frame_info *next_frame,
- void **this_prologue_cache,
- struct frame_id *this_id);
-
-static int pc_in_dummy_frame (CORE_ADDR pc);
+#include "gdb_string.h"
/* Dummy frame. This saves the processor state just prior to setting
up the inferior function call. Older targets save the registers
struct dummy_frame
{
struct dummy_frame *next;
-
- /* These values belong to the caller (the previous frame, the frame
- that this unwinds back to). */
- CORE_ADDR pc;
- CORE_ADDR top;
+ /* This frame's ID. Must match the value returned by
+ gdbarch_unwind_dummy_id. */
struct frame_id id;
+ /* The caller's regcache. */
struct regcache *regcache;
-
- /* Address range of the call dummy code. Look for PC in the range
- [LO..HI) (after allowing for DECR_PC_AFTER_BREAK). */
- CORE_ADDR call_lo;
- CORE_ADDR call_hi;
};
static struct dummy_frame *dummy_frame_stack = NULL;
-/* Function: find_dummy_frame(pc, fp, sp)
+/* Function: deprecated_pc_in_call_dummy (pc)
- Search the stack of dummy frames for one matching the given PC and
- FP/SP. Unlike pc_in_dummy_frame(), this function doesn't need to
- adjust for DECR_PC_AFTER_BREAK. This is because it is only legal
- to call this function after the PC has been adjusted. */
+ Return non-zero if the PC falls in a dummy frame created by gdb for
+ an inferior call. The code below which allows gdbarch_decr_pc_after_break
+ is for infrun.c, which may give the function a PC without that
+ subtracted out.
-static struct dummy_frame *
-find_dummy_frame (CORE_ADDR pc, CORE_ADDR fp)
-{
- struct dummy_frame *dummyframe;
-
- for (dummyframe = dummy_frame_stack; dummyframe != NULL;
- dummyframe = dummyframe->next)
- {
- /* Does the PC fall within the dummy frame's breakpoint
- instruction. If not, discard this one. */
- if (!(pc >= dummyframe->call_lo && pc < dummyframe->call_hi))
- continue;
- /* Does the FP match? */
- /* "infcall.c" explicitly saved the top-of-stack before the
- inferior function call, assume unwind_dummy_id() returns that
- same stack value. */
- if (fp != dummyframe->top)
- continue;
- /* The FP matches this dummy frame. */
- return dummyframe;
- }
-
- return NULL;
-}
+ FIXME: cagney/2002-11-23: This is silly. Surely "infrun.c" can
+ figure out what the real PC (as in the resume address) is BEFORE
+ calling this function.
-/* Function: pc_in_call_dummy (pc)
+ NOTE: cagney/2004-08-02: I'm pretty sure that, with the introduction of
+ infrun.c:adjust_pc_after_break (thanks), this function is now
+ always called with a correctly adjusted PC!
- Return true if the PC falls in a dummy frame created by gdb for an
- inferior call. The code below which allows DECR_PC_AFTER_BREAK is
- for infrun.c, which may give the function a PC without that
- subtracted out. */
+ NOTE: cagney/2004-08-02: Code should not need to call this. */
int
deprecated_pc_in_call_dummy (CORE_ADDR pc)
-{
- return pc_in_dummy_frame (pc);
-}
-
-/* Return non-zero if the PC falls in a dummy frame.
-
- The code below which allows DECR_PC_AFTER_BREAK is for infrun.c,
- which may give the function a PC without that subtracted out.
-
- FIXME: cagney/2002-11-23: This is silly. Surely "infrun.c" can
- figure out what the real PC (as in the resume address) is BEFORE
- calling this function. */
-
-static int
-pc_in_dummy_frame (CORE_ADDR pc)
{
struct dummy_frame *dummyframe;
for (dummyframe = dummy_frame_stack;
dummyframe != NULL;
dummyframe = dummyframe->next)
{
- if ((pc >= dummyframe->call_lo)
- && (pc < dummyframe->call_hi + DECR_PC_AFTER_BREAK))
+ if ((pc >= dummyframe->id.code_addr)
+ && (pc <= dummyframe->id.code_addr
+ + gdbarch_decr_pc_after_break (current_gdbarch)))
return 1;
}
return 0;
}
-/* Save all the registers on the dummy frame stack. Most ports save the
- registers on the target stack. This results in lots of unnecessary memory
- references, which are slow when debugging via a serial line. Instead, we
- save all the registers internally, and never write them to the stack. The
- registers get restored when the called function returns to the entry point,
- where a breakpoint is laying in wait. */
+/* Push the caller's state, along with the dummy frame info, onto a
+ dummy-frame stack. */
void
-generic_push_dummy_frame (void)
+dummy_frame_push (struct regcache *caller_regcache,
+ const struct frame_id *dummy_id)
{
struct dummy_frame *dummy_frame;
- CORE_ADDR fp = get_frame_base (get_current_frame ());
-
- /* check to see if there are stale dummy frames,
- perhaps left over from when a longjump took us out of a
- function that was called by the debugger */
+ /* Check to see if there are stale dummy frames, perhaps left over
+ from when a longjump took us out of a function that was called by
+ the debugger. */
dummy_frame = dummy_frame_stack;
while (dummy_frame)
- if (gdbarch_inner_than (current_gdbarch, dummy_frame->top, fp))
- /* stale -- destroy! */
+ /* FIXME: cagney/2004-08-02: Should just test IDs. */
+ if (frame_id_inner (dummy_frame->id, (*dummy_id)))
+ /* Stale -- destroy! */
{
dummy_frame_stack = dummy_frame->next;
regcache_xfree (dummy_frame->regcache);
else
dummy_frame = dummy_frame->next;
- dummy_frame = xmalloc (sizeof (struct dummy_frame));
- dummy_frame->regcache = regcache_xmalloc (current_gdbarch);
-
- dummy_frame->pc = read_pc ();
- dummy_frame->top = 0;
- dummy_frame->id = get_frame_id (get_current_frame ());
- regcache_cpy (dummy_frame->regcache, current_regcache);
+ dummy_frame = XZALLOC (struct dummy_frame);
+ dummy_frame->regcache = caller_regcache;
+ dummy_frame->id = (*dummy_id);
dummy_frame->next = dummy_frame_stack;
dummy_frame_stack = dummy_frame;
}
-void
-generic_save_dummy_frame_tos (CORE_ADDR sp)
+/* Return the dummy frame cache, it contains both the ID, and a
+ pointer to the regcache. */
+struct dummy_frame_cache
{
- dummy_frame_stack->top = sp;
-}
-
-/* Record the upper/lower bounds on the address of the call dummy. */
+ struct frame_id this_id;
+ struct regcache *prev_regcache;
+};
-void
-generic_save_call_dummy_addr (CORE_ADDR lo, CORE_ADDR hi)
+int
+dummy_frame_sniffer (const struct frame_unwind *self,
+ struct frame_info *next_frame,
+ void **this_prologue_cache)
{
- dummy_frame_stack->call_lo = lo;
- dummy_frame_stack->call_hi = hi;
+ struct dummy_frame *dummyframe;
+ struct frame_id this_id;
+
+ /* When unwinding a normal frame, the stack structure is determined
+ by analyzing the frame's function's code (be it using brute force
+ prologue analysis, or the dwarf2 CFI). In the case of a dummy
+ frame, that simply isn't possible. The PC is either the program
+ entry point, or some random address on the stack. Trying to use
+ that PC to apply standard frame ID unwind techniques is just
+ asking for trouble. */
+
+ /* Don't bother unles there is at least one dummy frame. */
+ if (dummy_frame_stack != NULL)
+ {
+ /* Use an architecture specific method to extract the prev's
+ dummy ID from the next frame. Note that this method uses
+ frame_register_unwind to obtain the register values needed to
+ determine the dummy frame's ID. */
+ this_id = gdbarch_unwind_dummy_id (get_frame_arch (next_frame),
+ next_frame);
+
+ /* Use that ID to find the corresponding cache entry. */
+ for (dummyframe = dummy_frame_stack;
+ dummyframe != NULL;
+ dummyframe = dummyframe->next)
+ {
+ if (frame_id_eq (dummyframe->id, this_id))
+ {
+ struct dummy_frame_cache *cache;
+ cache = FRAME_OBSTACK_ZALLOC (struct dummy_frame_cache);
+ cache->prev_regcache = dummyframe->regcache;
+ cache->this_id = this_id;
+ (*this_prologue_cache) = cache;
+ return 1;
+ }
+ }
+ }
+ return 0;
}
/* Given a call-dummy dummy-frame, return the registers. Here the
void **this_prologue_cache,
int regnum, int *optimized,
enum lval_type *lvalp, CORE_ADDR *addrp,
- int *realnum, void *bufferp)
+ int *realnum, gdb_byte *bufferp)
{
- struct dummy_frame *dummy;
- struct frame_id id;
-
- /* Call the ID method which, if at all possible, will set the
- prologue cache. */
- dummy_frame_this_id (next_frame, this_prologue_cache, &id);
- dummy = (*this_prologue_cache);
- gdb_assert (dummy != NULL);
+ /* The dummy-frame sniffer always fills in the cache. */
+ struct dummy_frame_cache *cache = (*this_prologue_cache);
+ gdb_assert (cache != NULL);
/* Describe the register's location. Generic dummy frames always
have the register value in an ``expression''. */
/* Use the regcache_cooked_read() method so that it, on the fly,
constructs either a raw or pseudo register from the raw
register cache. */
- regcache_cooked_read (dummy->regcache, regnum, bufferp);
+ regcache_cooked_read (cache->prev_regcache, regnum, bufferp);
}
}
void **this_prologue_cache,
struct frame_id *this_id)
{
- struct dummy_frame *dummy = (*this_prologue_cache);
- if (dummy != NULL)
- {
- (*this_id) = dummy->id;
- return;
- }
- /* When unwinding a normal frame, the stack structure is determined
- by analyzing the frame's function's code (be it using brute force
- prologue analysis, or the dwarf2 CFI). In the case of a dummy
- frame, that simply isn't possible. The PC is either the program
- entry point, or some random address on the stack. Trying to use
- that PC to apply standard frame ID unwind techniques is just
- asking for trouble. */
- /* Use an architecture specific method to extract the prev's dummy
- ID from the next frame. Note that this method uses
- frame_register_unwind to obtain the register values needed to
- determine the dummy frame's ID. */
- gdb_assert (gdbarch_unwind_dummy_id_p (current_gdbarch));
- (*this_id) = gdbarch_unwind_dummy_id (current_gdbarch, next_frame);
- (*this_prologue_cache) = find_dummy_frame ((*this_id).code_addr,
- (*this_id).stack_addr);
+ /* The dummy-frame sniffer always fills in the cache. */
+ struct dummy_frame_cache *cache = (*this_prologue_cache);
+ gdb_assert (cache != NULL);
+ (*this_id) = cache->this_id;
}
-static struct frame_unwind dummy_frame_unwind =
+static const struct frame_unwind dummy_frame_unwinder =
{
DUMMY_FRAME,
dummy_frame_this_id,
- dummy_frame_prev_register
+ dummy_frame_prev_register,
+ NULL,
+ dummy_frame_sniffer,
};
-const struct frame_unwind *
-dummy_frame_sniffer (struct frame_info *next_frame)
-{
- CORE_ADDR pc = frame_pc_unwind (next_frame);
- if (pc_in_dummy_frame (pc))
- return &dummy_frame_unwind;
- else
- return NULL;
-}
+const struct frame_unwind *const dummy_frame_unwind = {
+ &dummy_frame_unwinder
+};
static void
fprint_dummy_frames (struct ui_file *file)
{
gdb_print_host_address (s, file);
fprintf_unfiltered (file, ":");
- fprintf_unfiltered (file, " pc=0x%s", paddr (s->pc));
- fprintf_unfiltered (file, " top=0x%s", paddr (s->top));
fprintf_unfiltered (file, " id=");
fprint_frame_id (file, s->id);
- fprintf_unfiltered (file, " call_lo=0x%s", paddr (s->call_lo));
- fprintf_unfiltered (file, " call_hi=0x%s", paddr (s->call_hi));
fprintf_unfiltered (file, "\n");
}
}
{
struct ui_file *file = gdb_fopen (args, "w");
if (file == NULL)
- perror_with_name ("maintenance print dummy-frames");
+ perror_with_name (_("maintenance print dummy-frames"));
fprint_dummy_frames (file);
ui_file_delete (file);
}
_initialize_dummy_frame (void)
{
add_cmd ("dummy-frames", class_maintenance, maintenance_print_dummy_frames,
- "Print the contents of the internal dummy-frame stack.",
+ _("Print the contents of the internal dummy-frame stack."),
&maintenanceprintlist);
}