# and then Sanitize.
===================================================================
-RCS file: /local/cvsfiles/devo/gdb/.Sanitize,v
-retrieving revision 2.63
-diff -c -r2.63 .Sanitize
-*** 2.63 1992/07/14 07:51:45
---- .Sanitize 1992/07/16 22:43:53
-***************
-*** 77,82 ****
---- 77,85 ----
- doc
- dwarfread.c
- elfread.c
-+ energize
-+ energize.c
-+ energize.h
- environ.c
- environ.h
- eval.c
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/Makefile.in,v
-retrieving revision 1.172
-diff -c -r1.172 Makefile.in
-*** 1.172 1992/07/17 23:53:54
---- Makefile.in 1992/07/18 00:11:14
+*** config/ncr3000.mh.orig Mon Jun 15 12:25:13 1992
+--- config/ncr3000.mh Mon Aug 24 19:22:31 1992
+***************
+*** 38,40 ****
+--- 38,46 ----
+ # The /usr/ucb/install program is incompatible (complains about unknown
+ # group staff). Use good old cp...
+ INSTALL = cp
++
++ # These are the libs that are needed for the Energize version of gdb on
++ # SVR4. Note that we MUST include the standard C library before libucb.a,
++ # otherwise we get lots of broken stuff we don't want.
++ XM_CLIBS = -L/usr/lib -lm -lnet -lresolv -lform -lsocket -lc \
++ /usr/ucblib/libucb.a -lnsl
+*** Makefile.in.orig Tue Aug 18 14:59:22 1992
+--- Makefile.in Mon Aug 24 19:24:01 1992
***************
*** 123,128 ****
--- 123,135 ----
ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES}
! ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES}
- VERSION = 4.6.1
+ VERSION = 4.6.3
DIST=gdb
--- 162,174 ----
# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
! ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} \
! ${ENERGIZE_LIB}
- VERSION = 4.6.1
+ VERSION = 4.6.3
DIST=gdb
***************
-*** 190,196 ****
+*** 203,209 ****
${DEMANGLER}.c mem-break.c target.c inftarg.c \
- dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \
+ dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c stabsread.c \
ieee-float.c language.c parse.c buildsym.c objfiles.c \
! minsyms.c mipsread.c maint.c
# Source files in subdirectories (which will be handled separately by
# 'make gdb.tar.Z').
---- 198,204 ----
+--- 211,217 ----
${DEMANGLER}.c mem-break.c target.c inftarg.c \
- dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \
+ dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c stabsread.c \
ieee-float.c language.c parse.c buildsym.c objfiles.c \
! minsyms.c mipsread.c maint.c energize.c
# Source files in subdirectories (which will be handled separately by
# 'make gdb.tar.Z').
***************
-*** 276,282 ****
+*** 289,295 ****
command.o utils.o expprint.o environ.o version.o gdbtypes.o \
copying.o $(DEPFILES) ${DEMANGLER}.o mem-break.o target.o \
inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
! buildsym.o objfiles.o minsyms.o maint.o demangle.o \
- dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o
+ dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o \
+ stabsread.o
- RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
---- 284,290 ----
+--- 297,303 ----
command.o utils.o expprint.o environ.o version.o gdbtypes.o \
copying.o $(DEPFILES) ${DEMANGLER}.o mem-break.o target.o \
inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
! buildsym.o objfiles.o minsyms.o maint.o demangle.o energize.o \
- dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o
+ dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o \
+ stabsread.o
- RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
***************
-*** 289,295 ****
+*** 303,309 ****
NTSSTART = kdb-start.o
# For now, shortcut the "configure GDB for fewer languages" stuff.
YYFILES = c-exp.tab.c m2-exp.tab.c
---- 297,303 ----
+--- 311,317 ----
NTSSTART = kdb-start.o
# For now, shortcut the "configure GDB for fewer languages" stuff.
YYFILES = c-exp.tab.c m2-exp.tab.c
***************
-*** 343,348 ****
---- 351,370 ----
+*** 363,368 ****
+--- 371,390 ----
#load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
echo "Load .c corresponding to:" $(DEPFILES)
# This is useful when debugging GDB, because some Unix's don't let you run GDB
# on itself without copying the executable. So "make gdb1" will make
***************
-*** 643,649 ****
+*** 652,658 ****
-e '/extern.*free/d' \
< y.tab.c > m2-exp.tab.c
-rm y.tab.c
main.o: ${srcdir}/main.c
${CC} -c ${INTERNAL_CFLAGS} -I${READLINE_DIR} $<
---- 665,670 ----
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/breakpoint.c,v
-retrieving revision 1.40
-diff -c -r1.40 breakpoint.c
-*** 1.40 1992/07/16 23:23:02
---- breakpoint.c 1992/07/16 23:23:58
+--- 674,679 ----
+*** breakpoint.c.orig Sun Aug 23 11:09:10 1992
+--- breakpoint.c Mon Aug 24 19:22:26 1992
***************
*** 273,278 ****
--- 273,279 ----
else
{
***************
-*** 1366,1371 ****
---- 1370,1377 ----
+*** 1373,1378 ****
+--- 1377,1384 ----
mention (b)
struct breakpoint *b;
{
{
case bp_watchpoint:
***************
-*** 2113,2118 ****
---- 2119,2126 ----
+*** 2120,2125 ****
+--- 2126,2133 ----
register struct breakpoint *b;
register bpstat bs;
target_remove_breakpoint(bpt->address, bpt->shadow_contents);
***************
-*** 2284,2289 ****
---- 2292,2298 ----
+*** 2296,2301 ****
+--- 2304,2310 ----
if (b->number == bptnum)
{
b->ignore_count = count;
return;
else if (count == 0)
***************
-*** 2308,2314 ****
+*** 2320,2326 ****
struct breakpoint *b;
ALL_BREAKPOINTS (b)
}
/* Command to set ignore-count of breakpoint N to COUNT. */
---- 2317,2326 ----
+--- 2329,2338 ----
struct breakpoint *b;
ALL_BREAKPOINTS (b)
/* Command to set ignore-count of breakpoint N to COUNT. */
***************
-*** 2375,2380 ****
---- 2387,2394 ----
+*** 2387,2392 ****
+--- 2399,2406 ----
{
bpt->enable = enabled;
printf ("breakpoint #%d enabled\n", bpt->number);
***************
-*** 2422,2427 ****
---- 2436,2443 ----
+*** 2434,2439 ****
+--- 2448,2455 ----
disable_breakpoint (bpt)
struct breakpoint *bpt;
{
bpt->enable = disabled;
if (xgdb_verbose && bpt->type == bp_breakpoint)
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/command.c,v
-retrieving revision 1.18
-diff -c -r1.18 command.c
-*** 1.18 1992/07/10 17:22:30
---- command.c 1992/07/16 22:44:12
+*** command.c.orig Fri Jul 10 10:22:30 1992
+--- command.c Mon Aug 24 19:22:26 1992
***************
*** 1148,1154 ****
}
;
else
error ("Fork failed");
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/configure.in,v
-retrieving revision 1.51
-diff -c -r1.51 configure.in
-*** 1.51 1992/07/07 07:22:33
---- configure.in 1992/07/16 22:44:14
+*** configure.in.orig Tue Aug 18 11:35:50 1992
+--- configure.in Mon Aug 24 19:22:26 1992
***************
*** 1,4 ****
! configdirs="doc"
srcname="GDB"
srctrigger=main.c
target_dependent=true
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/defs.h,v
-retrieving revision 1.43
-diff -c -r1.43 defs.h
-*** 1.43 1992/07/09 04:40:24
---- defs.h 1992/07/16 22:48:44
-***************
-*** 805,808 ****
---- 805,810 ----
+*** defs.h.orig Mon Jul 20 21:14:28 1992
+--- defs.h Mon Aug 24 19:22:27 1992
+***************
+*** 808,811 ****
+--- 808,813 ----
#define MAINTENANCE_CMDS 1
#endif
+ #include "energize.h"
+
#endif /* !defined (DEFS_H) */
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/inflow.c,v
-retrieving revision 1.27
-diff -c -r1.27 inflow.c
-*** 1.27 1992/07/04 03:21:21
---- inflow.c 1992/07/05 12:58:31
+*** inflow.c.orig Wed Jul 22 21:41:45 1992
+--- inflow.c Mon Aug 24 19:22:27 1992
***************
-*** 81,87 ****
+*** 89,95 ****
static short pgrp_inferior;
static short pgrp_ours;
# else /* not def SHORT_PGRP */
static int pgrp_ours;
# endif /* not def SHORT_PGRP */
#else /* not def TIOCGPGRP */
---- 81,87 ----
+--- 89,95 ----
static short pgrp_inferior;
static short pgrp_ours;
# else /* not def SHORT_PGRP */
static int pgrp_ours;
# endif /* not def SHORT_PGRP */
#else /* not def TIOCGPGRP */
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/infrun.c,v
-retrieving revision 1.52
-diff -c -r1.52 infrun.c
-*** 1.52 1992/07/04 03:21:24
---- infrun.c 1992/07/05 13:46:46
-***************
-*** 617,622 ****
---- 617,623 ----
+*** infrun.c.orig Mon Aug 24 12:00:30 1992
+--- infrun.c Mon Aug 24 19:22:28 1992
+***************
+*** 633,638 ****
+--- 633,639 ----
Here we must get it up to actual execution of the real program. */
inferior_pid = pid; /* Needed for wait_for_inferior stuff below */
clear_proceed_status ();
***************
-*** 755,760 ****
---- 756,762 ----
+*** 771,776 ****
+--- 772,778 ----
attach (pid);
inferior_pid = pid;
push_target (&child_ops);
mark_breakpoints_out ();
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/inftarg.c,v
-retrieving revision 1.11
-diff -c -r1.11 inftarg.c
-*** 1.11 1992/03/29 23:21:27
---- inftarg.c 1992/07/05 13:48:05
+*** inftarg.c.orig Sun Mar 29 15:21:27 1992
+--- inftarg.c Mon Aug 24 19:22:28 1992
***************
*** 58,64 ****
#ifdef USE_PROC_FS
#endif
if (pid == -1) /* No more children to wait for */
{
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/main.c,v
-retrieving revision 1.51
-diff -c -r1.51 main.c
-*** 1.51 1992/07/10 17:22:33
---- main.c 1992/07/17 23:22:19
+*** main.c.orig Fri Jul 10 10:22:33 1992
+--- main.c Mon Aug 24 19:22:29 1992
***************
*** 426,431 ****
--- 426,432 ----
fflush (stdout);
}
\f
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/printcmd.c,v
-retrieving revision 1.30
-diff -c -r1.30 printcmd.c
-*** 1.30 1992/07/06 00:22:52
---- printcmd.c 1992/07/16 22:44:42
+*** printcmd.c.orig Sun Jul 5 17:22:52 1992
+--- printcmd.c Mon Aug 24 19:22:29 1992
***************
*** 778,783 ****
--- 778,792 ----
first = 0;
}
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/stack.c,v
-retrieving revision 1.33
-diff -c -r1.33 stack.c
-*** 1.33 1992/07/04 03:21:45
---- stack.c 1992/07/05 14:13:23
+*** stack.c.orig Fri Jul 3 20:21:45 1992
+--- stack.c Mon Aug 24 19:22:30 1992
***************
*** 159,165 ****
if (addressprint)
}
wrap_here (" ");
if (sal.symtab)
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/symfile.c,v
-retrieving revision 1.55
-diff -c -r1.55 symfile.c
-*** 1.55 1992/07/04 13:58:46
---- symfile.c 1992/07/05 14:14:12
+*** symfile.c.orig Sun Aug 23 11:09:17 1992
+--- symfile.c Mon Aug 24 19:22:30 1992
***************
*** 611,616 ****
--- 611,618 ----
return (objfile);
}
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/utils.c,v
-retrieving revision 1.54
-diff -c -r1.54 utils.c
-*** 1.54 1992/07/09 04:40:35
---- utils.c 1992/07/16 22:44:50
+*** utils.c.orig Sun Aug 23 11:09:21 1992
+--- utils.c Mon Aug 24 19:22:31 1992
***************
*** 694,700 ****
register int ans2;
while (1)
***************
-*** 701,721 ****
- {
+*** 703,723 ****
+ fflush (stdout);
va_start (args);
ctlstr = va_arg (args, char *);
vfprintf_filtered (stdout, ctlstr, args);
if (answer >= 'a')
answer -= 040;
if (answer == 'Y')
---- 701,732 ----
- {
+--- 703,734 ----
+ fflush (stdout);
va_start (args);
ctlstr = va_arg (args, char *);
+ energize_query (ctlstr, args);
answer -= 040;
if (answer == 'Y')
***************
-*** 723,728 ****
---- 734,740 ----
+*** 725,730 ****
+--- 736,742 ----
if (answer == 'N')
return 0;
printf_filtered ("Please answer y or n.\n");
}
***************
-*** 989,994 ****
---- 1001,1012 ----
+*** 991,996 ****
+--- 1003,1014 ----
if (linebuffer == 0)
return;
/* Don't do any filtering if it is disabled. */
if (stream != stdout
|| (lines_per_page == UINT_MAX && chars_per_line == UINT_MAX))
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/valprint.c,v
-retrieving revision 1.48
-diff -c -r1.48 valprint.c
-*** 1.48 1992/07/10 03:56:06
---- valprint.c 1992/07/16 22:44:53
-***************
-*** 485,490 ****
---- 485,491 ----
+*** valprint.c.orig Sat Aug 8 23:14:57 1992
+--- valprint.c Mon Aug 24 19:22:31 1992
+***************
+*** 488,493 ****
+--- 488,494 ----
struct type **dont_print;
{
int i, len, n_baseclasses;
check_stub_type (type);
***************
-*** 549,554 ****
---- 550,562 ----
+*** 552,557 ****
+--- 553,565 ----
fprint_symbol (stream, TYPE_FIELD_NAME (type, i));
fputs_filtered (" = ", stream);
}
{
value v;
***************
-*** 567,572 ****
---- 575,581 ----
+*** 570,575 ****
+--- 578,584 ----
valaddr + TYPE_FIELD_BITPOS (type, i) / 8,
0, stream, format, 0, recurse + 1, pretty);
}
if (pretty)
{
***************
-*** 801,806 ****
---- 810,816 ----
+*** 804,809 ****
+--- 813,819 ----
unsigned int rep1;
/* Number of repetitions we have detected so far. */
unsigned int reps;
if (i != 0)
if (arrayprint)
***************
-*** 822,827 ****
---- 832,842 ----
+*** 825,830 ****
+--- 835,845 ----
++rep1;
}
{
val_print (elttype, valaddr + i * eltlen,
***************
-*** 838,843 ****
---- 853,859 ----
+*** 841,846 ****
+--- 856,862 ----
recurse + 1, pretty);
things_printed++;
}
}
if (i < len)
fprintf_filtered (stream, "...");
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/config/amix.mh,v
-retrieving revision 1.4
-diff -c -r1.4 amix.mh
-*** 1.4 1992/06/10 02:05:16
---- config/amix.mh 1992/07/05 17:47:19
+*** demangle.c.orig Wed Jul 15 12:33:17 1992
+--- demangle.c Mon Aug 24 19:22:32 1992
***************
-*** 22,24 ****
---- 22,31 ----
+*** 37,43 ****
+ the appropriate target configuration file. */
- # SVR4 puts the BSD compatible install in /usr/ucb.
- INSTALL = /usr/ucb/install -c
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl
-===================================================================
-RCS file: /local/cvsfiles/devo/gdb/config/ncr3000.mh,v
-retrieving revision 1.4
-diff -c -r1.4 ncr3000.mh
-*** 1.4 1992/06/15 19:25:13
---- config/ncr3000.mh 1992/07/05 17:49:34
-***************
-*** 38,40 ****
---- 38,47 ----
- # The /usr/ucb/install program is incompatible (complains about unknown
- # group staff). Use good old cp...
- INSTALL = cp
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl
+ #ifndef DEFAULT_DEMANGLING_STYLE
+! # define DEFAULT_DEMANGLING_STYLE AUTO_DEMANGLING_STYLE_STRING
+ #endif
+
+ /* The current demangling style in affect. Global so that the demangler
+--- 37,43 ----
+ the appropriate target configuration file. */
+
+ #ifndef DEFAULT_DEMANGLING_STYLE
+! # define DEFAULT_DEMANGLING_STYLE LUCID_DEMANGLING_STYLE_STRING
+ #endif
+
+ /* The current demangling style in affect. Global so that the demangler