-# Apply these patches to GDB to produce an Energize GDB.
-# To apply these patches, first cd to gdb-XX/gdb, run "patch -p0 <thisfile",
-# and then Sanitize.
-
-===================================================================
-*** 2.72 1992/09/27 06:48:41
---- .Sanitize 1992/09/28 21:34:08
-***************
-*** 74,79 ****
---- 74,82 ----
- doc
- dwarfread.c
- elfread.c
-+ energize
-+ energize.c
-+ energize.h
- environ.c
- environ.h
- eval.c
-===================================================================
-*** 1.187 1992/09/26 08:06:30
---- Makefile.in 1992/09/28 21:34:08
-***************
-*** 123,128 ****
---- 123,135 ----
- READLINE_DEP = $$(READLINE_DIR)
- RL_LIB = ./../readline${subdir}/libreadline.a
-
-+ # Energize libraries. Works slightly differently than other libraries
-+ # because it is a gdb subdir and we try to build the energize library
-+ # if it doesn't exist, unlike readline, bfd, mmalloc, etc. Note
-+ # that SDIR and BDIR will be different if we configured with -srcdir.
-+ ENERGIZE_DIR = energize
-+ ENERGIZE_LIB = ${ENERGIZE_DIR}/libconn.a
-+
- # All the includes used for CFLAGS and for lint.
- # -I. for config files.
- # -I${srcdir} possibly for regex.h also.
-***************
-*** 157,166 ****
- # Libraries and corresponding dependencies for compiling gdb.
- # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
- # TERMCAP comes after readline, since readline depends on it.
-! CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
-! ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
-! CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \
-! ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
-
- ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
- ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
---- 164,173 ----
- # Libraries and corresponding dependencies for compiling gdb.
- # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
- # TERMCAP comes after readline, since readline depends on it.
-! CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} \
-! ${LIBIBERTY} ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS} ${ENERGIZE_LIB}
-! CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} ${BFD_LIB} ${RL_LIB} ${OPCODES} \
-! ${MMALLOC_LIB} ${LIBIBERTY} ${ENERGIZE_LIB}
-
- ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
- ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
-***************
-*** 200,206 ****
- mem-break.c target.c \
- dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c stabsread.c \
- language.c parse.c buildsym.c objfiles.c \
-! minsyms.c mipsread.c maint.c
-
- # Source files in subdirectories (which will be handled separately by
- # 'make gdb.tar.Z').
---- 207,213 ----
- mem-break.c target.c \
- dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c stabsread.c \
- language.c parse.c buildsym.c objfiles.c \
-! minsyms.c mipsread.c maint.c energize.c
-
- # Source files in subdirectories (which will be handled separately by
- # 'make gdb.tar.Z').
-***************
-*** 289,295 ****
- command.o utils.o expprint.o environ.o version.o gdbtypes.o \
- copying.o $(DEPFILES) mem-break.o target.o \
- putenv.o parse.o language.o $(YYOBJ) \
-! buildsym.o objfiles.o minsyms.o maint.o demangle.o \
- dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o \
- stabsread.o core.o
-
---- 296,302 ----
- command.o utils.o expprint.o environ.o version.o gdbtypes.o \
- copying.o $(DEPFILES) mem-break.o target.o \
- putenv.o parse.o language.o $(YYOBJ) \
-! buildsym.o objfiles.o minsyms.o maint.o demangle.o energize.o \
- dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o \
- stabsread.o core.o
-
-***************
-*** 303,309 ****
-
- NTSSTART = kdb-start.o
-
-! SUBDIRS = doc
-
- # For now, shortcut the "configure GDB for fewer languages" stuff.
- YYFILES = c-exp.tab.c m2-exp.tab.c
---- 310,316 ----
-
- NTSSTART = kdb-start.o
-
-! SUBDIRS = doc ${ENERGIZE_DIR}
-
- # For now, shortcut the "configure GDB for fewer languages" stuff.
- YYFILES = c-exp.tab.c m2-exp.tab.c
-***************
-*** 365,370 ****
---- 372,391 ----
- #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
- echo "Load .c corresponding to:" $(DEPFILES)
-
-+ ${ENERGIZE_LIB} :
-+ @(cd ${ENERGIZE_DIR}; \
-+ $(MAKE) \
-+ "against=$(against)" \
-+ "AR=$(AR)" \
-+ "AR_FLAGS=$(AR_FLAGS)" \
-+ "CC=$(CC)" \
-+ "CFLAGS=$(CFLAGS)" \
-+ "RANLIB=$(RANLIB)" \
-+ "MAKEINFO=$(MAKEINFO)" \
-+ "INSTALL=$(INSTALL)" \
-+ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
-+ "INSTALL_DATA=$(INSTALL_DATA)" \
-+ "BISON=$(BISON)")
-
- # This is useful when debugging GDB, because some Unix's don't let you run GDB
- # on itself without copying the executable. So "make gdb1" will make
-===================================================================
-*** 1.48 1992/09/29 05:07:04
---- breakpoint.c 1992/09/28 21:34:09
-***************
-*** 273,278 ****
---- 273,279 ----
- b->cond_string = NULL;
- if (from_tty)
- printf_filtered ("Breakpoint %d now unconditional.\n", bnum);
-+ energize_condition_breakpoint(b);
- }
- else
- {
-***************
-*** 281,286 ****
---- 282,288 ----
- typed in or the decompiled expression. */
- b->cond_string = savestring (arg, strlen (arg));
- b->cond = parse_exp_1 (&arg, block_for_pc (b->address), 0);
-+ energize_condition_breakpoint(b);
- if (*arg)
- error ("Junk at end of expression");
- }
-***************
-*** 322,327 ****
---- 324,330 ----
- l = read_command_lines ();
- free_command_lines (&b->commands);
- b->commands = l;
-+ energize_commands_breakpoint(b);
- return;
- }
- error ("No breakpoint number %d.", bnum);
-***************
-*** 445,452 ****
- b->enable = disabled;
- if (!disabled_breaks)
- {
-! fprintf (stderr,
-! "Cannot insert breakpoint %d:\n", b->number);
- printf_filtered ("Disabling shared library breakpoints:\n");
- }
- disabled_breaks = 1;
---- 448,455 ----
- b->enable = disabled;
- if (!disabled_breaks)
- {
-! fprintf_filtered (stderr, "Cannot insert breakpoint %d:\n",
-! b->number);
- printf_filtered ("Disabling shared library breakpoints:\n");
- }
- disabled_breaks = 1;
-***************
-*** 455,464 ****
- else
- #endif
- {
-! fprintf (stderr, "Cannot insert breakpoint %d:\n", b->number);
- #ifdef ONE_PROCESS_WRITETEXT
-! fprintf (stderr,
-! "The same program may be running in another process.\n");
- #endif
- memory_error (val, b->address); /* which bombs us out */
- }
---- 458,468 ----
- else
- #endif
- {
-! fprintf_filtered (stderr, "Cannot insert breakpoint %d:\n",
-! b->number);
- #ifdef ONE_PROCESS_WRITETEXT
-! fprintf_filtered (stderr,
-! "The same program may be running in another process.\n");
- #endif
- memory_error (val, b->address); /* which bombs us out */
- }
-***************
-*** 478,484 ****
- int val;
-
- #ifdef BREAKPOINT_DEBUG
-! printf ("Removing breakpoints.\n");
- #endif /* BREAKPOINT_DEBUG */
-
- ALL_BREAKPOINTS (b)
---- 482,488 ----
- int val;
-
- #ifdef BREAKPOINT_DEBUG
-! printf_filtered ("Removing breakpoints.\n");
- #endif /* BREAKPOINT_DEBUG */
-
- ALL_BREAKPOINTS (b)
-***************
-*** 489,500 ****
- return val;
- b->inserted = 0;
- #ifdef BREAKPOINT_DEBUG
-! printf ("Removed breakpoint at %s",
-! local_hex_string(b->address));
-! printf (", shadow %s",
-! local_hex_string(b->shadow_contents[0]));
-! printf (", %s.\n",
-! local_hex_string(b->shadow_contents[1]));
- #endif /* BREAKPOINT_DEBUG */
- }
-
---- 493,504 ----
- return val;
- b->inserted = 0;
- #ifdef BREAKPOINT_DEBUG
-! printf_filtered ("Removed breakpoint at %s",
-! local_hex_string(b->address));
-! printf_filtered (", shadow %s",
-! local_hex_string(b->shadow_contents[0]));
-! printf_filtered (", %s.\n",
-! local_hex_string(b->shadow_contents[1]));
- #endif /* BREAKPOINT_DEBUG */
- }
-
-***************
-*** 922,927 ****
---- 926,932 ----
- {
- b->ignore_count--;
- this_bp_stop = 0;
-+ energize_ignore_breakpoint(b);
- }
- else
- {
-***************
-*** 1141,1157 ****
- others++;
- if (others > 0)
- {
-! printf ("Note: breakpoint%s ", (others > 1) ? "s" : "");
- ALL_BREAKPOINTS (b)
- if (b->address == pc)
- {
- others--;
-! printf ("%d%s%s ",
-! b->number,
-! (b->enable == disabled) ? " (disabled)" : "",
-! (others > 1) ? "," : ((others == 1) ? " and" : ""));
- }
-! printf ("also set at pc %s.\n", local_hex_string(pc));
- }
- }
- \f
---- 1146,1163 ----
- others++;
- if (others > 0)
- {
-! printf_filtered ("Note: breakpoint%s ", (others > 1) ? "s" : "");
- ALL_BREAKPOINTS (b)
- if (b->address == pc)
- {
- others--;
-! printf_filtered ("%d%s%s ",
-! b->number,
-! (b->enable == disabled) ? " (disabled)" : "",
-! (others > 1) ? "," :
-! ((others == 1) ? " and" : ""));
- }
-! printf_filtered ("also set at pc %s.\n", local_hex_string(pc));
- }
- }
- \f
-***************
-*** 1373,1378 ****
---- 1379,1386 ----
- mention (b)
- struct breakpoint *b;
- {
-+ energize_create_breakpoint(b);
-+
- switch (b->type)
- {
- case bp_watchpoint:
-***************
-*** 1550,1557 ****
-
- if (sals.nelts > 1)
- {
-! printf ("Multiple breakpoints were set.\n");
-! printf ("Use the \"delete\" command to delete unwanted breakpoints.\n");
- }
- free ((PTR)sals.sals);
- }
---- 1558,1565 ----
-
- if (sals.nelts > 1)
- {
-! printf_filtered ("Multiple breakpoints were set.\n");
-! printf_filtered ("Use the \"delete\" command to delete unwanted breakpoints.\n");
- }
- free ((PTR)sals.sals);
- }
-***************
-*** 1769,1775 ****
- goto win;
- }
- #endif
-! printf ("No catch clause for exception %s.\n", p);
- #if 0
- win:
- #endif
---- 1777,1783 ----
- goto win;
- }
- #endif
-! printf_filtered ("No catch clause for exception %s.\n", p);
- #if 0
- win:
- #endif
-***************
-*** 1970,1985 ****
- b->enable = enabled;
- b->disposition = tempflag ? delete : donttouch;
-
-! printf ("Breakpoint %d at %s", b->number, local_hex_string(b->address));
- if (b->symtab)
-! printf (": file %s, line %d.", b->symtab->filename, b->line_number);
-! printf ("\n");
- }
-
- if (sals.nelts > 1)
- {
-! printf ("Multiple breakpoints were set.\n");
-! printf ("Use the \"delete\" command to delete unwanted breakpoints.\n");
- }
- free ((PTR)sals.sals);
- }
---- 1978,1995 ----
- b->enable = enabled;
- b->disposition = tempflag ? delete : donttouch;
-
-! printf_filtered ("Breakpoint %d at %s", b->number,
-! local_hex_string(b->address));
- if (b->symtab)
-! printf_filtered (": file %s, line %d.",
-! b->symtab->filename, b->line_number);
-! printf_filtered ("\n");
- }
-
- if (sals.nelts > 1)
- {
-! printf_filtered ("Multiple breakpoints were set.\n");
-! printf_filtered ("Use the \"delete\" command to delete unwanted breakpoints.\n");
- }
- free ((PTR)sals.sals);
- }
-***************
-*** 2086,2095 ****
- }
-
- if (found->next) from_tty = 1; /* Always report if deleted more than one */
-! if (from_tty) printf ("Deleted breakpoint%s ", found->next ? "s" : "");
- while (found)
- {
-! if (from_tty) printf ("%d ", found->number);
- b1 = found->next;
- delete_breakpoint (found);
- found = b1;
---- 2096,2106 ----
- }
-
- if (found->next) from_tty = 1; /* Always report if deleted more than one */
-! if (from_tty) printf_filtered ("Deleted breakpoint%s ",
-! found->next ? "s" : "");
- while (found)
- {
-! if (from_tty) printf_filtered ("%d ", found->number);
- b1 = found->next;
- delete_breakpoint (found);
- found = b1;
-***************
-*** 2120,2125 ****
---- 2131,2138 ----
- register struct breakpoint *b;
- register bpstat bs;
-
-+ energize_delete_breakpoint(bpt);
-+
- if (bpt->inserted)
- target_remove_breakpoint(bpt->address, bpt->shadow_contents);
-
-***************
-*** 2144,2150 ****
- free ((PTR)bpt->addr_string);
-
- if (xgdb_verbose && bpt->type == bp_breakpoint)
-! printf ("breakpoint #%d deleted\n", bpt->number);
-
- /* Be sure no bpstat's are pointing at it after it's been freed. */
- /* FIXME, how can we find all bpstat's? We just check stop_bpstat for now. */
---- 2157,2163 ----
- free ((PTR)bpt->addr_string);
-
- if (xgdb_verbose && bpt->type == bp_breakpoint)
-! printf_filtered ("breakpoint #%d deleted\n", bpt->number);
-
- /* Be sure no bpstat's are pointing at it after it's been freed. */
- /* FIXME, how can we find all bpstat's? We just check stop_bpstat for now. */
-***************
-*** 2264,2270 ****
-
- ALL_BREAKPOINTS_SAFE (b, temp)
- {
-! sprintf (message, message1, b->number); /* Format possible error msg */
- catch_errors (breakpoint_re_set_one, (char *) b, message);
- }
-
---- 2277,2283 ----
-
- ALL_BREAKPOINTS_SAFE (b, temp)
- {
-! printf_filtered (message, message1, b->number); /* Format possible error msg */
- catch_errors (breakpoint_re_set_one, (char *) b, message);
- }
-
-***************
-*** 2298,2303 ****
---- 2311,2317 ----
- if (b->number == bptnum)
- {
- b->ignore_count = count;
-+ energize_ignore_breakpoint(b);
- if (!from_tty)
- return;
- else if (count == 0)
-***************
-*** 2322,2328 ****
- struct breakpoint *b;
-
- ALL_BREAKPOINTS (b)
-! b->ignore_count = 0;
- }
-
- /* Command to set ignore-count of breakpoint N to COUNT. */
---- 2336,2345 ----
- struct breakpoint *b;
-
- ALL_BREAKPOINTS (b)
-! {
-! b->ignore_count = 0;
-! energize_ignore_breakpoint(b);
-! }
- }
-
- /* Command to set ignore-count of breakpoint N to COUNT. */
-***************
-*** 2377,2383 ****
- function (b);
- goto win;
- }
-! printf ("No breakpoint number %d.\n", num);
- win:
- p = p1;
- }
---- 2394,2400 ----
- function (b);
- goto win;
- }
-! printf_filtered ("No breakpoint number %d.\n", num);
- win:
- p = p1;
- }
-***************
-*** 2389,2396 ****
- {
- bpt->enable = enabled;
-
- if (xgdb_verbose && bpt->type == bp_breakpoint)
-! printf ("breakpoint #%d enabled\n", bpt->number);
-
- check_duplicates (bpt->address);
- if (bpt->type == bp_watchpoint)
---- 2406,2415 ----
- {
- bpt->enable = enabled;
-
-+ energize_enable_breakpoint(bpt);
-+
- if (xgdb_verbose && bpt->type == bp_breakpoint)
-! printf_filtered ("breakpoint #%d enabled\n", bpt->number);
-
- check_duplicates (bpt->address);
- if (bpt->type == bp_watchpoint)
-***************
-*** 2436,2441 ****
---- 2455,2462 ----
- disable_breakpoint (bpt)
- struct breakpoint *bpt;
- {
-+ energize_disable_breakpoint(bpt);
-+
- bpt->enable = disabled;
-
- if (xgdb_verbose && bpt->type == bp_breakpoint)
-===================================================================
-*** 1.18 1992/07/10 17:22:30
---- command.c 1992/09/28 21:34:09
-***************
-*** 1093,1098 ****
---- 1093,1100 ----
- else
- error ("gdb internal error: bad cmd_type in do_setshow_command");
- (*c->function.sfunc) (NULL, from_tty, c);
-+ if (energize)
-+ print_prompt();
- }
-
- /* Show all the settings in a list of show commands. */
-***************
-*** 1148,1154 ****
- }
-
- if (pid != -1)
-! while ((rc = wait (&status)) != pid && rc != -1)
- ;
- else
- error ("Fork failed");
---- 1150,1156 ----
- }
-
- if (pid != -1)
-! while ((rc = energize_shell_wait (&status)) != pid && rc != -1)
- ;
- else
- error ("Fork failed");
-===================================================================
-*** 1.67 1992/09/21 20:01:00
---- configure.in 1992/09/28 21:34:10
-***************
-*** 1,4 ****
-! configdirs="doc"
- srcname="GDB"
- srctrigger=main.c
-
---- 1,4 ----
-! configdirs="energize doc"
- srcname="GDB"
- srctrigger=main.c
-
-===================================================================
-*** 1.48 1992/09/15 08:55:59
---- defs.h 1992/09/28 21:34:10
-***************
-*** 811,814 ****
---- 811,816 ----
- #define MAINTENANCE_CMDS 1
- #endif
-
-+ #include "energize.h"
-+
- #endif /* !defined (DEFS_H) */
-===================================================================
-*** 2.5 1992/09/03 16:26:03
---- demangle.c 1992/09/28 21:34:10
-***************
-*** 37,43 ****
- the appropriate target configuration file. */
-
- #ifndef DEFAULT_DEMANGLING_STYLE
-! # define DEFAULT_DEMANGLING_STYLE AUTO_DEMANGLING_STYLE_STRING
- #endif
-
- /* String name for the current demangling style. Set by the "set demangling"
---- 37,43 ----
- the appropriate target configuration file. */
-
- #ifndef DEFAULT_DEMANGLING_STYLE
-! # define DEFAULT_DEMANGLING_STYLE LUCID_DEMANGLING_STYLE_STRING
- #endif
-
- /* String name for the current demangling style. Set by the "set demangling"
-===================================================================
-*** 1.34 1992/09/26 05:20:04
---- infcmd.c 1992/09/28 21:34:11
-***************
-*** 242,247 ****
---- 242,248 ----
-
- target_create_inferior (exec_file, inferior_args,
- environ_vector (inferior_environ));
-+ energize_new_process();
- }
- \f
- static void
-===================================================================
-*** 1.29 1992/09/25 19:19:00
---- inflow.c 1992/09/28 21:34:11
-***************
-*** 87,93 ****
- static short pgrp_inferior;
- static short pgrp_ours;
- # else /* not def SHORT_PGRP */
-! static int pgrp_inferior;
- static int pgrp_ours;
- # endif /* not def SHORT_PGRP */
- #else /* not def TIOCGPGRP */
---- 87,93 ----
- static short pgrp_inferior;
- static short pgrp_ours;
- # else /* not def SHORT_PGRP */
-! int pgrp_inferior;
- static int pgrp_ours;
- # endif /* not def SHORT_PGRP */
- #else /* not def TIOCGPGRP */
-===================================================================
-*** 1.59 1992/09/26 01:49:01
---- infrun.c 1992/09/28 21:34:12
-***************
-*** 519,525 ****
- flush_cached_frames ();
- registers_changed ();
-
-! target_wait (&w);
-
- #ifdef SIGTRAP_STOP_AFTER_LOAD
-
---- 519,525 ----
- flush_cached_frames ();
- registers_changed ();
-
-! energize_wait (&w);
-
- #ifdef SIGTRAP_STOP_AFTER_LOAD
-
-===================================================================
-*** 1.17 1992/09/26 09:06:10
---- inftarg.c 1992/09/28 21:34:12
-***************
-*** 123,128 ****
---- 123,129 ----
-
- attach (pid);
- inferior_pid = pid;
-+ energize_new_process();
- push_target (&child_ops);
- #endif /* ATTACH_DETACH */
- }
-===================================================================
-*** 1.57 1992/09/29 05:07:14
---- main.c 1992/09/28 21:34:13
-***************
-*** 441,446 ****
---- 441,447 ----
- char *corearg = NULL;
- char *cdarg = NULL;
- char *ttyarg = NULL;
-+ char *energize_id = NULL;
-
- /* Pointers to all arguments of +command option. */
- char **cmdarg;
-***************
-*** 539,544 ****
---- 540,546 ----
- {"tty", required_argument, 0, 't'},
- {"baud", required_argument, 0, 'b'},
- {"b", required_argument, 0, 'b'},
-+ {"context", required_argument, 0, 12},
- /* Allow machine descriptions to add more options... */
- #ifdef ADDITIONAL_OPTIONS
- ADDITIONAL_OPTIONS
-***************
-*** 571,576 ****
---- 573,581 ----
- case 11:
- cdarg = optarg;
- break;
-+ case 12:
-+ energize_id = optarg;
-+ break;
- case 's':
- symarg = optarg;
- break;
-***************
-*** 611,617 ****
- ADDITIONAL_OPTION_CASES
- #endif
- case '?':
-! fprintf (stderr,
- "Use `%s +help' for a complete list of options.\n",
- argv[0]);
- exit (1);
---- 616,622 ----
- ADDITIONAL_OPTION_CASES
- #endif
- case '?':
-! fprintf_filtered (stderr,
- "Use `%s +help' for a complete list of options.\n",
- argv[0]);
- exit (1);
-***************
-*** 668,674 ****
- corearg = argv[optind];
- break;
- case 3:
-! fprintf (stderr,
- "Excess command line arguments ignored. (%s%s)\n",
- argv[optind], (optind == argc - 1) ? "" : " ...");
- break;
---- 673,679 ----
- corearg = argv[optind];
- break;
- case 3:
-! fprintf_filtered (stderr,
- "Excess command line arguments ignored. (%s%s)\n",
- argv[optind], (optind == argc - 1) ? "" : " ...");
- break;
-***************
-*** 679,684 ****
---- 684,692 ----
-
- /* Run the init function of each source file */
-
-+ /* Must call this first to setup tty */
-+ energize_initialize (energize_id, execarg);
-+
- initialize_cmd_lists (); /* This needs to be done first */
- initialize_all_files ();
- initialize_main (); /* But that omits this file! Do it now */
-***************
-*** 853,859 ****
- if (!setjmp (to_top_level))
- {
- do_cleanups (ALL_CLEANUPS); /* Do complete cleanup */
-! command_loop ();
- quit_command ((char *)0, instream == stdin);
- }
- }
---- 861,870 ----
- if (!setjmp (to_top_level))
- {
- do_cleanups (ALL_CLEANUPS); /* Do complete cleanup */
-! if (energize)
-! energize_main_loop();
-! else
-! command_loop ();
- quit_command ((char *)0, instream == stdin);
- }
- }
-***************
-*** 915,921 ****
- else if (c->function.cfunc == NO_FUNCTION)
- error ("That is not a command, just a help topic.");
- else
-! (*c->function.cfunc) (arg, from_tty & caution);
- }
-
- /* Tell the user if the language has changed (except first time). */
---- 926,932 ----
- else if (c->function.cfunc == NO_FUNCTION)
- error ("That is not a command, just a help topic.");
- else
-! energize_call_command (c, arg, from_tty & caution);
- }
-
- /* Tell the user if the language has changed (except first time). */
-***************
-*** 1317,1323 ****
- #else
- signal (STOP_SIGNAL, stop_sig);
- #endif
-! printf ("%s", prompt);
- fflush (stdout);
-
- /* Forget about any previous command -- null line now will do nothing. */
---- 1328,1334 ----
- #else
- signal (STOP_SIGNAL, stop_sig);
- #endif
-! printf_filtered ("%s", prompt);
- fflush (stdout);
-
- /* Forget about any previous command -- null line now will do nothing. */
-***************
-*** 1463,1469 ****
- if (expanded)
- {
- /* Print the changes. */
-! printf ("%s\n", history_value);
-
- /* If there was an error, call this function again. */
- if (expanded < 0)
---- 1474,1480 ----
- if (expanded)
- {
- /* Print the changes. */
-! printf_filtered ("%s\n", history_value);
-
- /* If there was an error, call this function again. */
- if (expanded < 0)
-***************
-*** 1570,1576 ****
- while (1)
- {
- dont_repeat ();
-! p = command_line_input ((char *) NULL, instream == stdin);
- if (p == NULL)
- /* Treat end of file like "end". */
- break;
---- 1581,1587 ----
- while (1)
- {
- dont_repeat ();
-! p = energize_command_line_input ((char *) NULL, instream == stdin);
- if (p == NULL)
- /* Treat end of file like "end". */
- break;
-***************
-*** 1661,1667 ****
- char *arg;
- int from_tty;
- {
-! printf ("\"info\" must be followed by the name of an info command.\n");
- help_list (infolist, "info ", -1, stdout);
- }
-
---- 1672,1678 ----
- char *arg;
- int from_tty;
- {
-! printf_filtered ("\"info\" must be followed by the name of an info command.\n");
- help_list (infolist, "info ", -1, stdout);
- }
-
-***************
-*** 1777,1783 ****
-
- if (from_tty)
- {
-! printf ("Type commands for definition of \"%s\".\n\
- End with a line saying just \"end\".\n", comname);
- fflush (stdout);
- }
---- 1788,1794 ----
-
- if (from_tty)
- {
-! printf_filtered ("Type commands for definition of \"%s\".\n\
- End with a line saying just \"end\".\n", comname);
- fflush (stdout);
- }
-***************
-*** 1810,1816 ****
- error ("Command \"%s\" is built-in.", comname);
-
- if (from_tty)
-! printf ("Type documentation for \"%s\".\n\
- End with a line saying just \"end\".\n", comname);
-
- doclines = read_command_lines ();
---- 1821,1827 ----
- error ("Command \"%s\" is built-in.", comname);
-
- if (from_tty)
-! printf_filtered ("Type documentation for \"%s\".\n\
- End with a line saying just \"end\".\n", comname);
-
- doclines = read_command_lines ();
-***************
-*** 1841,1847 ****
- static void
- print_gnu_advertisement()
- {
-! printf ("\
- GDB is free software and you are welcome to distribute copies of it\n\
- under certain conditions; type \"show copying\" to see the conditions.\n\
- There is absolutely no warranty for GDB; type \"show warranty\" for details.\n\
---- 1852,1858 ----
- static void
- print_gnu_advertisement()
- {
-! printf_filtered ("\
- GDB is free software and you are welcome to distribute copies of it\n\
- under certain conditions; type \"show copying\" to see the conditions.\n\
- There is absolutely no warranty for GDB; type \"show warranty\" for details.\n\
-***************
-*** 1874,1880 ****
- void
- print_prompt ()
- {
-! printf ("%s", prompt);
- fflush (stdout);
- }
- \f
---- 1885,1891 ----
- void
- print_prompt ()
- {
-! printf_filtered ("%s", prompt);
- fflush (stdout);
- }
- \f
-***************
-*** 1920,1929 ****
- getcwd (dirbuf, sizeof (dirbuf));
-
- if (strcmp (dirbuf, current_directory))
-! printf ("Working directory %s\n (canonically %s).\n",
- current_directory, dirbuf);
- else
-! printf ("Working directory %s.\n", current_directory);
- }
-
- static void
---- 1931,1940 ----
- getcwd (dirbuf, sizeof (dirbuf));
-
- if (strcmp (dirbuf, current_directory))
-! printf_filtered ("Working directory %s\n (canonically %s).\n",
- current_directory, dirbuf);
- else
-! printf_filtered ("Working directory %s.\n", current_directory);
- }
-
- static void
-***************
-*** 2160,2166 ****
- char *args;
- int from_tty;
- {
-! printf ("\"set history\" must be followed by the name of a history subcommand.\n");
- help_list (sethistlist, "set history ", -1, stdout);
- }
-
---- 2171,2177 ----
- char *args;
- int from_tty;
- {
-! printf_filtered ("\"set history\" must be followed by the name of a history subcommand.\n");
- help_list (sethistlist, "set history ", -1, stdout);
- }
-
-===================================================================
-*** 1.33 1992/09/29 05:07:19
---- printcmd.c 1992/09/28 21:34:13
-***************
-*** 778,792 ****
- {
- int histindex = record_latest_value (val);
-
- if (inspect)
-! printf ("\031(gdb-makebuffer \"%s\" %d '(\"", exp, histindex);
- else
- if (histindex >= 0) printf_filtered ("$%d = ", histindex);
-
- print_formatted (val, format, fmt.size);
- printf_filtered ("\n");
- if (inspect)
-! printf("\") )\030");
- }
-
- if (cleanup)
---- 778,802 ----
- {
- int histindex = record_latest_value (val);
-
-+ if (energize)
-+ {
-+ char buf[20];
-+
-+ sprintf(buf, "$%d", histindex);
-+ energize_start_variable_annotation(buf, NULL, VALUE_TYPE(val),
-+ VALUE_ADDRESS(val), "");
-+ }
-+
- if (inspect)
-! printf_filtered ("\031(gdb-makebuffer \"%s\" %d '(\"", exp, histindex);
- else
- if (histindex >= 0) printf_filtered ("$%d = ", histindex);
-
- print_formatted (val, format, fmt.size);
-+ energize_end_variable_annotation();
- printf_filtered ("\n");
- if (inspect)
-! printf_filtered("\") )\030");
- }
-
- if (cleanup)
-***************
-*** 890,896 ****
- {
- if (is_a_field_of_this)
- {
-! printf ("Symbol \"%s\" is a field of the local class variable `this'\n", exp);
- return;
- }
-
---- 900,906 ----
- {
- if (is_a_field_of_this)
- {
-! printf_filtered ("Symbol \"%s\" is a field of the local class variable `this'\n", exp);
- return;
- }
-
-***************
-*** 897,903 ****
- msymbol = lookup_minimal_symbol (exp, (struct objfile *) NULL);
-
- if (msymbol != NULL)
-! printf ("Symbol \"%s\" is at %s in a file compiled without debugging.\n",
- exp, local_hex_string(msymbol -> address));
- else
- error ("No symbol \"%s\" in current context.", exp);
---- 907,913 ----
- msymbol = lookup_minimal_symbol (exp, (struct objfile *) NULL);
-
- if (msymbol != NULL)
-! printf_filtered ("Symbol \"%s\" is at %s in a file compiled without debugging.\n",
- exp, local_hex_string(msymbol -> address));
- else
- error ("No symbol \"%s\" in current context.", exp);
-***************
-*** 904,910 ****
- return;
- }
-
-! printf ("Symbol \"%s\" is ", SYMBOL_NAME (sym));
- val = SYMBOL_VALUE (sym);
- basereg = SYMBOL_BASEREG (sym);
-
---- 914,920 ----
- return;
- }
-
-! printf_filtered ("Symbol \"%s\" is ", SYMBOL_NAME (sym));
- val = SYMBOL_VALUE (sym);
- basereg = SYMBOL_BASEREG (sym);
-
-***************
-*** 912,945 ****
- {
- case LOC_CONST:
- case LOC_CONST_BYTES:
-! printf ("constant");
- break;
-
- case LOC_LABEL:
-! printf ("a label at address %s", local_hex_string(SYMBOL_VALUE_ADDRESS (sym)));
- break;
-
- case LOC_REGISTER:
-! printf ("a variable in register %s", reg_names[val]);
- break;
-
- case LOC_STATIC:
-! printf ("static storage at address %s", local_hex_string(SYMBOL_VALUE_ADDRESS (sym)));
- break;
-
- case LOC_REGPARM:
-! printf ("an argument in register %s", reg_names[val]);
- break;
-
- case LOC_ARG:
- if (SYMBOL_BASEREG_VALID (sym))
- {
-! printf ("an argument at offset %ld from register %s",
- val, reg_names[basereg]);
- }
- else
- {
-! printf ("an argument at offset %ld", val);
- }
- break;
-
---- 922,955 ----
- {
- case LOC_CONST:
- case LOC_CONST_BYTES:
-! printf_filtered ("constant");
- break;
-
- case LOC_LABEL:
-! printf_filtered ("a label at address %s", local_hex_string(SYMBOL_VALUE_ADDRESS (sym)));
- break;
-
- case LOC_REGISTER:
-! printf_filtered ("a variable in register %s", reg_names[val]);
- break;
-
- case LOC_STATIC:
-! printf_filtered ("static storage at address %s", local_hex_string(SYMBOL_VALUE_ADDRESS (sym)));
- break;
-
- case LOC_REGPARM:
-! printf_filtered ("an argument in register %s", reg_names[val]);
- break;
-
- case LOC_ARG:
- if (SYMBOL_BASEREG_VALID (sym))
- {
-! printf_filtered ("an argument at offset %ld from register %s",
- val, reg_names[basereg]);
- }
- else
- {
-! printf_filtered ("an argument at offset %ld", val);
- }
- break;
-
-***************
-*** 946,957 ****
- case LOC_LOCAL_ARG:
- if (SYMBOL_BASEREG_VALID (sym))
- {
-! printf ("an argument at offset %ld from register %s",
- val, reg_names[basereg]);
- }
- else
- {
-! printf ("an argument at frame offset %ld", val);
- }
- break;
-
---- 956,967 ----
- case LOC_LOCAL_ARG:
- if (SYMBOL_BASEREG_VALID (sym))
- {
-! printf_filtered ("an argument at offset %ld from register %s",
- val, reg_names[basereg]);
- }
- else
- {
-! printf_filtered ("an argument at frame offset %ld", val);
- }
- break;
-
-***************
-*** 958,990 ****
- case LOC_LOCAL:
- if (SYMBOL_BASEREG_VALID (sym))
- {
-! printf ("a local variable at offset %ld from register %s",
- val, reg_names[basereg]);
- }
- else
- {
-! printf ("a local variable at frame offset %ld", val);
- }
- break;
-
- case LOC_REF_ARG:
-! printf ("a reference argument at offset %ld", val);
- break;
-
- case LOC_TYPEDEF:
-! printf ("a typedef");
- break;
-
- case LOC_BLOCK:
-! printf ("a function at address %s",
- local_hex_string(BLOCK_START (SYMBOL_BLOCK_VALUE (sym))));
- break;
-
- default:
-! printf ("of unknown (botched) type");
- break;
- }
-! printf (".\n");
- }
- \f
- static void
---- 968,1000 ----
- case LOC_LOCAL:
- if (SYMBOL_BASEREG_VALID (sym))
- {
-! printf_filtered ("a local variable at offset %ld from register %s",
- val, reg_names[basereg]);
- }
- else
- {
-! printf_filtered ("a local variable at frame offset %ld", val);
- }
- break;
-
- case LOC_REF_ARG:
-! printf_filtered ("a reference argument at offset %ld", val);
- break;
-
- case LOC_TYPEDEF:
-! printf_filtered ("a typedef");
- break;
-
- case LOC_BLOCK:
-! printf_filtered ("a function at address %s",
- local_hex_string(BLOCK_START (SYMBOL_BLOCK_VALUE (sym))));
- break;
-
- default:
-! printf_filtered ("of unknown (botched) type");
- break;
- }
-! printf_filtered (".\n");
- }
- \f
- static void
-***************
-*** 1419,1425 ****
- d->status = disabled;
- return;
- }
-! printf ("No display number %d.\n", num);
- }
-
- void
---- 1429,1435 ----
- d->status = disabled;
- return;
- }
-! printf_filtered ("No display number %d.\n", num);
- }
-
- void
-***************
-*** 1428,1434 ****
- if (current_display_number >= 0)
- {
- disable_display (current_display_number);
-! fprintf (stderr, "Disabling display %d to avoid infinite recursion.\n",
- current_display_number);
- }
- current_display_number = -1;
---- 1438,1444 ----
- if (current_display_number >= 0)
- {
- disable_display (current_display_number);
-! fprintf_filtered (stderr, "Disabling display %d to avoid infinite recursion.\n",
- current_display_number);
- }
- current_display_number = -1;
-***************
-*** 1442,1448 ****
- register struct display *d;
-
- if (!display_chain)
-! printf ("There are no auto-display expressions now.\n");
- else
- printf_filtered ("Auto-display expressions now in effect:\n\
- Num Enb Expression\n");
---- 1452,1458 ----
- register struct display *d;
-
- if (!display_chain)
-! printf_filtered ("There are no auto-display expressions now.\n");
- else
- printf_filtered ("Auto-display expressions now in effect:\n\
- Num Enb Expression\n");
-***************
-*** 1495,1501 ****
- d->status = enabled;
- goto win;
- }
-! printf ("No display number %d.\n", num);
- win:
- p = p1;
- while (*p == ' ' || *p == '\t')
---- 1505,1511 ----
- d->status = enabled;
- goto win;
- }
-! printf_filtered ("No display number %d.\n", num);
- win:
- p = p1;
- while (*p == ' ' || *p == '\t')
-***************
-*** 1652,1662 ****
---- 1662,1680 ----
- standard indentation here is 4 spaces, and val_print indents
- 2 for each recurse. */
- val = read_var_value (sym, FRAME_INFO_ID (fi));
-+
-+ energize_start_variable_annotation(SYMBOL_NAME(sym), sym,
-+ VALUE_TYPE(val),
-+ VALUE_ADDRESS(val), "");
-+
- if (val)
- val_print (VALUE_TYPE (val), VALUE_CONTENTS (val), VALUE_ADDRESS (val),
- stream, 0, 0, 2, Val_no_prettyprint);
- else
- fputs_filtered ("???", stream);
-+
-+ energize_end_variable_annotation();
-+
- first = 0;
- }
-
-===================================================================
-*** 1.35 1992/09/18 09:20:00
---- stack.c 1992/09/28 21:34:14
-***************
-*** 159,165 ****
- if (addressprint)
- printf_filtered ("%s in ", local_hex_string(fi->pc));
-
-! fputs_demangled (fname, stdout, 0);
- fputs_filtered (" (...)\n", stdout);
-
- return;
---- 159,168 ----
- if (addressprint)
- printf_filtered ("%s in ", local_hex_string(fi->pc));
-
-! if (energize)
-! energize_annotate_function(fname, 0, level);
-! else
-! fputs_demangled (fname, stdout, 0);
- fputs_filtered (" (...)\n", stdout);
-
- return;
-***************
-*** 218,224 ****
- if (addressprint)
- if (fi->pc != sal.pc || !sal.symtab)
- printf_filtered ("%s in ", local_hex_string(fi->pc));
-! fputs_demangled (funname ? funname : "??", stdout, 0);
- wrap_here (" ");
- fputs_filtered (" (", stdout);
- if (args)
---- 221,230 ----
- if (addressprint)
- if (fi->pc != sal.pc || !sal.symtab)
- printf_filtered ("%s in ", local_hex_string(fi->pc));
-! if (energize)
-! energize_annotate_function(funname ? funname : "??", 0, level);
-! else
-! fputs_demangled (funname ? funname : "??", stdout, 0);
- wrap_here (" ");
- fputs_filtered (" (", stdout);
- if (args)
-***************
-*** 255,261 ****
- {
- if (addressprint && mid_statement)
- printf_filtered ("%s\t", local_hex_string(fi->pc));
-! print_source_lines (sal.symtab, sal.line, sal.line + 1, 0);
- }
- current_source_line = max (sal.line - lines_to_list/2, 1);
- }
---- 261,268 ----
- {
- if (addressprint && mid_statement)
- printf_filtered ("%s\t", local_hex_string(fi->pc));
-! if (!energize)
-! print_source_lines (sal.symtab, sal.line, sal.line + 1, 0);
- }
- current_source_line = max (sal.line - lines_to_list/2, 1);
- }
-***************
-*** 429,435 ****
- if (funname)
- {
- printf_filtered (" in ");
-! fputs_demangled (funname, stdout, DMGL_ANSI | DMGL_PARAMS);
- }
- wrap_here (" ");
- if (sal.symtab)
---- 436,446 ----
- if (funname)
- {
- printf_filtered (" in ");
-! if (energize)
-! energize_annotate_function(funname, DMGL_ANSI | DMGL_PARAMS,
-! selected_frame_level);
-! else
-! fputs_demangled (funname, stdout, DMGL_ANSI | DMGL_PARAMS);
- }
- wrap_here (" ");
- if (sal.symtab)
-===================================================================
-*** 1.59 1992/09/29 05:07:26
---- symfile.c 1992/09/28 21:34:14
-***************
-*** 614,619 ****
---- 614,621 ----
- fflush (stdout);
- }
-
-+ energize_symbol_file(objfile);
-+
- return (objfile);
- }
-
-***************
-*** 646,652 ****
- current_source_line = 0;
- if (from_tty)
- {
-! printf ("No symbol file now.\n");
- }
- }
- else
---- 648,654 ----
- current_source_line = 0;
- if (from_tty)
- {
-! printf_filtered ("No symbol file now.\n");
- }
- }
- else
-***************
-*** 1164,1170 ****
- return;
- clear_symtab_users_done = clear_symtab_users_queued;
-
-! printf ("Resetting debugger state after updating old symbol tables\n");
-
- /* Someday, we should do better than this, by only blowing away
- the things that really need to be blown. */
---- 1166,1172 ----
- return;
- clear_symtab_users_done = clear_symtab_users_queued;
-
-! printf_filtered ("Resetting debugger state after updating old symbol tables\n");
-
- /* Someday, we should do better than this, by only blowing away
- the things that really need to be blown. */
-===================================================================
-*** 1.63 1992/09/26 05:34:06
---- utils.c 1992/09/28 21:34:15
-***************
-*** 700,720 ****
- fflush (stdout);
- va_start (args);
- ctlstr = va_arg (args, char *);
- vfprintf_filtered (stdout, ctlstr, args);
-- va_end (args);
- printf_filtered ("(y or n) ");
-! fflush (stdout);
-! answer = fgetc (stdin);
-! clearerr (stdin); /* in case of C-d */
-! if (answer == EOF) /* C-d */
-! return 1;
-! if (answer != '\n') /* Eat rest of input line, to EOF or newline */
-! do
-! {
-! ans2 = fgetc (stdin);
-! clearerr (stdin);
-! }
-! while (ans2 != EOF && ans2 != '\n');
- if (answer >= 'a')
- answer -= 040;
- if (answer == 'Y')
---- 700,731 ----
- fflush (stdout);
- va_start (args);
- ctlstr = va_arg (args, char *);
-+ energize_query (ctlstr, args);
- vfprintf_filtered (stdout, ctlstr, args);
- printf_filtered ("(y or n) ");
-! if (energize)
-! {
-! char *buf;
-!
-! buf = energize_command_line_input(0, 0);
-! answer = buf ? *buf : 'Y';
-! energize_acknowledge_query(buf);
-! }
-! else
-! {
-! fflush (stdout);
-! answer = fgetc (stdin);
-! clearerr (stdin); /* in case of C-d */
-! if (answer == EOF) /* C-d */
-! return 1;
-! if (answer != '\n') /* Eat rest of input line, to EOF or newline */
-! do
-! {
-! ans2 = fgetc (stdin);
-! clearerr (stdin);
-! }
-! while (ans2 != EOF && ans2 != '\n');
-! }
- if (answer >= 'a')
- answer -= 040;
- if (answer == 'Y')
-***************
-*** 722,727 ****
---- 733,739 ----
- if (answer == 'N')
- return 0;
- printf_filtered ("Please answer y or n.\n");
-+ va_end (args);
- }
- }
-
-***************
-*** 1000,1005 ****
---- 1012,1023 ----
- if (linebuffer == 0)
- return;
-
-+ if (energize)
-+ {
-+ energize_fputs(linebuffer);
-+ return;
-+ }
-+
- /* Don't do any filtering if it is disabled. */
- if (stream != stdout
- || (lines_per_page == UINT_MAX && chars_per_line == UINT_MAX))
-===================================================================
-*** 1.55 1992/09/29 05:07:34
---- valprint.c 1992/09/28 21:34:15
-***************
-*** 384,390 ****
- VALUE_CONTENTS (val) + typelen * i,
- VALUE_ADDRESS (val) + typelen * i,
- stream, format, 1, 0, pretty);
-! fprintf (stream, " <repeats %u times>", reps);
- i = rep1 - 1;
- things_printed += REPEAT_COUNT_THRESHOLD;
- }
---- 384,390 ----
- VALUE_CONTENTS (val) + typelen * i,
- VALUE_ADDRESS (val) + typelen * i,
- stream, format, 1, 0, pretty);
-! fprintf_filtered (stream, " <repeats %u times>", reps);
- i = rep1 - 1;
- things_printed += REPEAT_COUNT_THRESHOLD;
- }
-***************
-*** 488,493 ****
---- 488,494 ----
- struct type **dont_print;
- {
- int i, len, n_baseclasses;
-+ char expr_tag[100]; /* Energize */
-
- check_stub_type (type);
-
-***************
-*** 552,557 ****
---- 553,565 ----
- fprint_symbol (stream, TYPE_FIELD_NAME (type, i));
- fputs_filtered (" = ", stream);
- }
-+
-+ sprintf(expr_tag, ".%s", TYPE_FIELD_NAME(type, i));
-+
-+ energize_start_variable_annotation(expr_tag, NULL,
-+ TYPE_FIELD_TYPE(type, i),
-+ (CORE_ADDR) (valaddr + TYPE_FIELD_BITPOS(type, i) / 8),
-+ "");
- if (TYPE_FIELD_PACKED (type, i))
- {
- value v;
-***************
-*** 570,575 ****
---- 578,584 ----
- valaddr + TYPE_FIELD_BITPOS (type, i) / 8,
- 0, stream, format, 0, recurse + 1, pretty);
- }
-+ energize_end_variable_annotation();
- }
- if (pretty)
- {
-***************
-*** 804,809 ****
---- 813,819 ----
- unsigned int rep1;
- /* Number of repetitions we have detected so far. */
- unsigned int reps;
-+ char expr_tag[100]; /* Energize */
-
- if (i != 0)
- if (arrayprint)
-***************
-*** 825,830 ****
---- 835,845 ----
- ++rep1;
- }
-
-+ sprintf(expr_tag, "[%d]", i);
-+ energize_start_variable_annotation(expr_tag, NULL,
-+ elttype,
-+ (CORE_ADDR) (valaddr + i * eltlen),
-+ "");
- if (reps > REPEAT_COUNT_THRESHOLD)
- {
- val_print (elttype, valaddr + i * eltlen,
-***************
-Sun Oct 24 23:48:55 1993*** 841,846 ****
---- 856,862 ----
- recurse + 1, pretty);
- things_printed++;
- }
-+ energize_end_variable_annotation();
- }
- if (i < len)
- fprintf_filtered (stream, "...");
-***************
-*** 910,916 ****
- {
- fprintf_filtered (stream, "&");
- type_print_varspec_prefix (TYPE_FN_FIELD_TYPE (f, j), stream, 0, 0);
-! fprintf (stream, kind);
- if (TYPE_FN_FIELD_PHYSNAME (f, j)[0] == '_'
- && TYPE_FN_FIELD_PHYSNAME (f, j)[1] == CPLUS_MARKER)
- type_print_method_args
---- 926,932 ----
- {
- fprintf_filtered (stream, "&");
- type_print_varspec_prefix (TYPE_FN_FIELD_TYPE (f, j), stream, 0, 0);
-! fprintf_filtered (stream, kind);
- if (TYPE_FN_FIELD_PHYSNAME (f, j)[0] == '_'
- && TYPE_FN_FIELD_PHYSNAME (f, j)[1] == CPLUS_MARKER)
- type_print_method_args
-***************
-*** 1528,1534 ****
-
- case TYPE_CODE_METHOD:
- if (passed_a_ptr)
-! fprintf (stream, "(");
- type_print_varspec_prefix (TYPE_TARGET_TYPE (type), stream, 0,
- 0);
- if (passed_a_ptr)
---- 1544,1550 ----
-
- case TYPE_CODE_METHOD:
- if (passed_a_ptr)
-! fprintf_filtered (stream, "(");
- type_print_varspec_prefix (TYPE_TARGET_TYPE (type), stream, 0,
- 0);
- if (passed_a_ptr)
-***************
-*** 1907,1913 ****
- if (TYPE_TARGET_TYPE (TYPE_FN_FIELD_TYPE (f, j)) == 0)
- {
- /* Keep GDB from crashing here. */
-! fprintf (stream, "<undefined type> %s;\n",
- TYPE_FN_FIELD_PHYSNAME (f, j));
- break;
- }
---- 1923,1929 ----
- if (TYPE_TARGET_TYPE (TYPE_FN_FIELD_TYPE (f, j)) == 0)
- {
- /* Keep GDB from crashing here. */
-! fprintf_filtered (stream, "<undefined type> %s;\n",
- TYPE_FN_FIELD_PHYSNAME (f, j));
- break;
- }
-***************
-*** 2098,2104 ****
- char *arg;
- int from_tty;
- {
-! printf (
- "\"set print\" must be followed by the name of a print subcommand.\n");
- help_list (setprintlist, "set print ", -1, stdout);
- }
---- 2114,2120 ----
- char *arg;
- int from_tty;
- {
-! printf_filtered (
- "\"set print\" must be followed by the name of a print subcommand.\n");
- help_list (setprintlist, "set print ", -1, stdout);
- }
-===================================================================
-*** 1.5 1992/09/26 08:07:45
---- amix.mh 1992/09/28 21:34:15
-***************
-*** 22,24 ****
---- 22,38 ----
-
- # SVR4 puts the BSD compatible install in /usr/ucb.
- INSTALL = /usr/ucb/install -c
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl
-===================================================================
-*** 1.5 1992/09/26 08:08:14
---- ncr3000.mh 1992/09/28 21:34:16
-***************
-*** 38,40 ****
---- 38,59 ----
- # The /usr/ucb/install program is incompatible (complains about unknown
- # group staff). Use good old cp...
- INSTALL = cp
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ XM_CLIBS = -L/usr/lib -lm -lnet -lresolv -lform -lsocket -lnsl -lc
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl