-# Apply these patches to GDB to produce an Energize GDB.
-# To apply these patches, first cd to gdb-XX/gdb, run "patch -p0 <thisfile",
-# and then Sanitize.
-
-===================================================================
-*** 2.71 1992/09/25 17:04:36
---- .Sanitize 1992/09/25 23:47:40
-***************
-*** 74,79 ****
---- 74,82 ----
- doc
- dwarfread.c
- elfread.c
-+ energize
-+ energize.c
-+ energize.h
- environ.c
- environ.h
- eval.c
-===================================================================
-*** 1.186 1992/09/25 17:03:18
---- Makefile.in 1992/09/26 00:20:58
-***************
-*** 123,128 ****
---- 123,135 ----
- READLINE_DEP = $$(READLINE_DIR)
- RL_LIB = ./../readline${subdir}/libreadline.a
-
-+ # Energize libraries. Works slightly differently than other libraries
-+ # because it is a gdb subdir and we try to build the energize library
-+ # if it doesn't exist, unlike readline, bfd, mmalloc, etc. Note
-+ # that SDIR and BDIR will be different if we configured with -srcdir.
-+ ENERGIZE_DIR = energize
-+ ENERGIZE_LIB = ${ENERGIZE_DIR}/libconn.a
-+
- # All the includes used for CFLAGS and for lint.
- # -I. for config files.
- # -I${srcdir} possibly for regex.h also.
-***************
-*** 158,164 ****
- # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
- # TERMCAP comes after readline, since readline depends on it.
- CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
-! ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
- CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \
- ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
-
---- 165,171 ----
- # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
- # TERMCAP comes after readline, since readline depends on it.
- CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
-! ${ENERGIZE_LIB} ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
- CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \
- ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
-
-***************
-*** 200,206 ****
- mem-break.c target.c inftarg.c \
- dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c stabsread.c \
- ieee-float.c language.c parse.c buildsym.c objfiles.c \
-! minsyms.c mipsread.c maint.c
-
- # Source files in subdirectories (which will be handled separately by
- # 'make gdb.tar.Z').
---- 207,213 ----
- mem-break.c target.c inftarg.c \
- dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c stabsread.c \
- ieee-float.c language.c parse.c buildsym.c objfiles.c \
-! minsyms.c mipsread.c maint.c energize.c
-
- # Source files in subdirectories (which will be handled separately by
- # 'make gdb.tar.Z').
-***************
-*** 289,295 ****
- command.o utils.o expprint.o environ.o version.o gdbtypes.o \
- copying.o $(DEPFILES) mem-break.o target.o \
- inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
-! buildsym.o objfiles.o minsyms.o maint.o demangle.o \
- dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o \
- stabsread.o core.o
-
---- 296,302 ----
- command.o utils.o expprint.o environ.o version.o gdbtypes.o \
- copying.o $(DEPFILES) mem-break.o target.o \
- inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
-! buildsym.o objfiles.o minsyms.o maint.o demangle.o energize.o \
- dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o \
- stabsread.o core.o
-
-***************
-*** 303,309 ****
-
- NTSSTART = kdb-start.o
-
-! SUBDIRS = doc
-
- # For now, shortcut the "configure GDB for fewer languages" stuff.
- YYFILES = c-exp.tab.c m2-exp.tab.c
---- 310,316 ----
-
- NTSSTART = kdb-start.o
-
-! SUBDIRS = doc ${ENERGIZE_DIR}
-
- # For now, shortcut the "configure GDB for fewer languages" stuff.
- YYFILES = c-exp.tab.c m2-exp.tab.c
-***************
-*** 365,370 ****
---- 372,391 ----
- #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
- echo "Load .c corresponding to:" $(DEPFILES)
-
-+ ${ENERGIZE_LIB} :
-+ @(cd ${ENERGIZE_DIR}; \
-+ $(MAKE) \
-+ "against=$(against)" \
-+ "AR=$(AR)" \
-+ "AR_FLAGS=$(AR_FLAGS)" \
-+ "CC=$(CC)" \
-+ "CFLAGS=$(CFLAGS)" \
-+ "RANLIB=$(RANLIB)" \
-+ "MAKEINFO=$(MAKEINFO)" \
-+ "INSTALL=$(INSTALL)" \
-+ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
-+ "INSTALL_DATA=$(INSTALL_DATA)" \
-+ "BISON=$(BISON)")
-
- # This is useful when debugging GDB, because some Unix's don't let you run GDB
- # on itself without copying the executable. So "make gdb1" will make
-===================================================================
-*** 1.47 1992/09/19 11:47:08
---- breakpoint.c 1992/09/25 23:47:48
-***************
-*** 273,278 ****
---- 273,279 ----
- b->cond_string = NULL;
- if (from_tty)
- printf_filtered ("Breakpoint %d now unconditional.\n", bnum);
-+ energize_condition_breakpoint(b);
- }
- else
- {
-***************
-*** 281,286 ****
---- 282,288 ----
- typed in or the decompiled expression. */
- b->cond_string = savestring (arg, strlen (arg));
- b->cond = parse_exp_1 (&arg, block_for_pc (b->address), 0);
-+ energize_condition_breakpoint(b);
- if (*arg)
- error ("Junk at end of expression");
- }
-***************
-*** 322,327 ****
---- 324,330 ----
- l = read_command_lines ();
- free_command_lines (&b->commands);
- b->commands = l;
-+ energize_commands_breakpoint(b);
- return;
- }
- error ("No breakpoint number %d.", bnum);
-***************
-*** 923,928 ****
---- 926,932 ----
- {
- b->ignore_count--;
- this_bp_stop = 0;
-+ energize_ignore_breakpoint(b);
- }
- else
- {
-***************
-*** 1375,1380 ****
---- 1379,1386 ----
- mention (b)
- struct breakpoint *b;
- {
-+ energize_create_breakpoint(b);
-+
- switch (b->type)
- {
- case bp_watchpoint:
-***************
-*** 2125,2130 ****
---- 2131,2138 ----
- register struct breakpoint *b;
- register bpstat bs;
-
-+ energize_delete_breakpoint(bpt);
-+
- if (bpt->inserted)
- target_remove_breakpoint(bpt->address, bpt->shadow_contents);
-
-***************
-*** 2303,2308 ****
---- 2311,2317 ----
- if (b->number == bptnum)
- {
- b->ignore_count = count;
-+ energize_ignore_breakpoint(b);
- if (!from_tty)
- return;
- else if (count == 0)
-***************
-*** 2327,2333 ****
- struct breakpoint *b;
-
- ALL_BREAKPOINTS (b)
-! b->ignore_count = 0;
- }
-
- /* Command to set ignore-count of breakpoint N to COUNT. */
---- 2336,2345 ----
- struct breakpoint *b;
-
- ALL_BREAKPOINTS (b)
-! {
-! b->ignore_count = 0;
-! energize_ignore_breakpoint(b);
-! }
- }
-
- /* Command to set ignore-count of breakpoint N to COUNT. */
-***************
-*** 2394,2399 ****
---- 2406,2413 ----
- {
- bpt->enable = enabled;
-
-+ energize_enable_breakpoint(bpt);
-+
- if (xgdb_verbose && bpt->type == bp_breakpoint)
- printf_filtered ("breakpoint #%d enabled\n", bpt->number);
-
-***************
-*** 2441,2446 ****
---- 2455,2462 ----
- disable_breakpoint (bpt)
- struct breakpoint *bpt;
- {
-+ energize_disable_breakpoint(bpt);
-+
- bpt->enable = disabled;
-
- if (xgdb_verbose && bpt->type == bp_breakpoint)
-===================================================================
-*** 1.18 1992/07/10 17:22:30
---- command.c 1992/09/18 19:23:13
-***************
-*** 1093,1098 ****
---- 1093,1100 ----
- else
- error ("gdb internal error: bad cmd_type in do_setshow_command");
- (*c->function.sfunc) (NULL, from_tty, c);
-+ if (energize)
-+ print_prompt();
- }
-
- /* Show all the settings in a list of show commands. */
-***************
-*** 1148,1154 ****
- }
-
- if (pid != -1)
-! while ((rc = wait (&status)) != pid && rc != -1)
- ;
- else
- error ("Fork failed");
---- 1150,1156 ----
- }
-
- if (pid != -1)
-! while ((rc = energize_shell_wait (&status)) != pid && rc != -1)
- ;
- else
- error ("Fork failed");
-===================================================================
-*** 1.67 1992/09/21 20:01:00
---- configure.in 1992/09/25 23:47:53
-***************
-*** 1,4 ****
-! configdirs="doc"
- srcname="GDB"
- srctrigger=main.c
-
---- 1,4 ----
-! configdirs="energize doc"
- srcname="GDB"
- srctrigger=main.c
-
-===================================================================
-*** 1.48 1992/09/15 08:55:59
---- defs.h 1992/09/15 08:54:35
-***************
-*** 811,814 ****
---- 811,816 ----
- #define MAINTENANCE_CMDS 1
- #endif
-
-+ #include "energize.h"
-+
- #endif /* !defined (DEFS_H) */
-===================================================================
-*** 2.5 1992/09/03 16:26:03
---- demangle.c 1992/09/15 05:19:59
-***************
-*** 37,43 ****
- the appropriate target configuration file. */
-
- #ifndef DEFAULT_DEMANGLING_STYLE
-! # define DEFAULT_DEMANGLING_STYLE AUTO_DEMANGLING_STYLE_STRING
- #endif
-
- /* String name for the current demangling style. Set by the "set demangling"
---- 37,43 ----
- the appropriate target configuration file. */
-
- #ifndef DEFAULT_DEMANGLING_STYLE
-! # define DEFAULT_DEMANGLING_STYLE LUCID_DEMANGLING_STYLE_STRING
- #endif
-
- /* String name for the current demangling style. Set by the "set demangling"
-===================================================================
-*** 1.29 1992/09/25 19:19:00
---- inflow.c 1992/09/25 23:48:13
-***************
-*** 87,93 ****
- static short pgrp_inferior;
- static short pgrp_ours;
- # else /* not def SHORT_PGRP */
-! static int pgrp_inferior;
- static int pgrp_ours;
- # endif /* not def SHORT_PGRP */
- #else /* not def TIOCGPGRP */
---- 87,93 ----
- static short pgrp_inferior;
- static short pgrp_ours;
- # else /* not def SHORT_PGRP */
-! int pgrp_inferior;
- static int pgrp_ours;
- # endif /* not def SHORT_PGRP */
- #else /* not def TIOCGPGRP */
-===================================================================
-*** 1.14 1992/09/25 19:19:08
---- inftarg.c 1992/09/26 00:25:51
-***************
-*** 76,86 ****
- int pid;
-
- do {
-! #ifdef USE_PROC_FS
-! pid = proc_wait (status);
-! #else
-! pid = wait (status);
-! #endif
- if (pid == -1) /* No more children to wait for */
- {
- fprintf (stderr, "Child process unexpectedly missing.\n");
---- 76,82 ----
- int pid;
-
- do {
-! pid = energize_wait (status);
- if (pid == -1) /* No more children to wait for */
- {
- fprintf (stderr, "Child process unexpectedly missing.\n");
-***************
-*** 138,143 ****
---- 134,140 ----
-
- attach (pid);
- inferior_pid = pid;
-+ energize_new_process();
- push_target (&child_ops);
-
- mark_breakpoints_out ();
-***************
-*** 394,399 ****
---- 391,397 ----
- Here we must get it up to actual execution of the real program. */
-
- inferior_pid = pid; /* Needed for wait_for_inferior stuff below */
-+ energize_new_process();
-
- clear_proceed_status ();
-
-===================================================================
-*** 1.56 1992/09/22 05:23:29
---- main.c 1992/09/25 23:48:21
-***************
-*** 441,446 ****
---- 441,447 ----
- char *corearg = NULL;
- char *cdarg = NULL;
- char *ttyarg = NULL;
-+ char *energize_id = NULL;
-
- /* Pointers to all arguments of +command option. */
- char **cmdarg;
-***************
-*** 539,544 ****
---- 540,546 ----
- {"tty", required_argument, 0, 't'},
- {"baud", required_argument, 0, 'b'},
- {"b", required_argument, 0, 'b'},
-+ {"context", required_argument, 0, 12},
- /* Allow machine descriptions to add more options... */
- #ifdef ADDITIONAL_OPTIONS
- ADDITIONAL_OPTIONS
-***************
-*** 571,576 ****
---- 573,581 ----
- case 11:
- cdarg = optarg;
- break;
-+ case 12:
-+ energize_id = optarg;
-+ break;
- case 's':
- symarg = optarg;
- break;
-***************
-*** 679,684 ****
---- 684,692 ----
-
- /* Run the init function of each source file */
-
-+ /* Must call this first to setup tty */
-+ energize_initialize (energize_id, execarg);
-+
- initialize_cmd_lists (); /* This needs to be done first */
- initialize_all_files ();
- initialize_main (); /* But that omits this file! Do it now */
-***************
-*** 853,859 ****
- if (!setjmp (to_top_level))
- {
- do_cleanups (ALL_CLEANUPS); /* Do complete cleanup */
-! command_loop ();
- quit_command ((char *)0, instream == stdin);
- }
- }
---- 861,870 ----
- if (!setjmp (to_top_level))
- {
- do_cleanups (ALL_CLEANUPS); /* Do complete cleanup */
-! if (energize)
-! energize_main_loop();
-! else
-! command_loop ();
- quit_command ((char *)0, instream == stdin);
- }
- }
-***************
-*** 915,921 ****
- else if (c->function.cfunc == NO_FUNCTION)
- error ("That is not a command, just a help topic.");
- else
-! (*c->function.cfunc) (arg, from_tty & caution);
- }
-
- /* Tell the user if the language has changed (except first time). */
---- 926,932 ----
- else if (c->function.cfunc == NO_FUNCTION)
- error ("That is not a command, just a help topic.");
- else
-! energize_call_command (c, arg, from_tty & caution);
- }
-
- /* Tell the user if the language has changed (except first time). */
-***************
-*** 1570,1576 ****
- while (1)
- {
- dont_repeat ();
-! p = command_line_input ((char *) NULL, instream == stdin);
- if (p == NULL)
- /* Treat end of file like "end". */
- break;
---- 1581,1587 ----
- while (1)
- {
- dont_repeat ();
-! p = energize_command_line_input ((char *) NULL, instream == stdin);
- if (p == NULL)
- /* Treat end of file like "end". */
- break;
-===================================================================
-*** 1.32 1992/09/15 06:27:00
---- printcmd.c 1992/09/15 06:30:06
-***************
-*** 778,783 ****
---- 778,792 ----
- {
- int histindex = record_latest_value (val);
-
-+ if (energize)
-+ {
-+ char buf[20];
-+
-+ sprintf(buf, "$%d", histindex);
-+ energize_start_variable_annotation(buf, NULL, VALUE_TYPE(val),
-+ VALUE_ADDRESS(val), "");
-+ }
-+
- if (inspect)
- printf_filtered ("\031(gdb-makebuffer \"%s\" %d '(\"", exp, histindex);
- else
-***************
-*** 784,789 ****
---- 793,799 ----
- if (histindex >= 0) printf_filtered ("$%d = ", histindex);
-
- print_formatted (val, format, fmt.size);
-+ energize_end_variable_annotation();
- printf_filtered ("\n");
- if (inspect)
- printf_filtered("\") )\030");
-***************
-*** 1652,1662 ****
---- 1662,1680 ----
- standard indentation here is 4 spaces, and val_print indents
- 2 for each recurse. */
- val = read_var_value (sym, FRAME_INFO_ID (fi));
-+
-+ energize_start_variable_annotation(SYMBOL_NAME(sym), sym,
-+ VALUE_TYPE(val),
-+ VALUE_ADDRESS(val), "");
-+
- if (val)
- val_print (VALUE_TYPE (val), VALUE_CONTENTS (val), VALUE_ADDRESS (val),
- stream, 0, 0, 2, Val_no_prettyprint);
- else
- fputs_filtered ("???", stream);
-+
-+ energize_end_variable_annotation();
-+
- first = 0;
- }
-
-===================================================================
-*** 1.35 1992/09/18 09:20:00
---- stack.c 1992/09/25 23:48:37
-***************
-*** 159,165 ****
- if (addressprint)
- printf_filtered ("%s in ", local_hex_string(fi->pc));
-
-! fputs_demangled (fname, stdout, 0);
- fputs_filtered (" (...)\n", stdout);
-
- return;
---- 159,168 ----
- if (addressprint)
- printf_filtered ("%s in ", local_hex_string(fi->pc));
-
-! if (energize)
-! energize_annotate_function(fname, 0, level);
-! else
-! fputs_demangled (fname, stdout, 0);
- fputs_filtered (" (...)\n", stdout);
-
- return;
-***************
-*** 218,224 ****
- if (addressprint)
- if (fi->pc != sal.pc || !sal.symtab)
- printf_filtered ("%s in ", local_hex_string(fi->pc));
-! fputs_demangled (funname ? funname : "??", stdout, 0);
- wrap_here (" ");
- fputs_filtered (" (", stdout);
- if (args)
---- 221,230 ----
- if (addressprint)
- if (fi->pc != sal.pc || !sal.symtab)
- printf_filtered ("%s in ", local_hex_string(fi->pc));
-! if (energize)
-! energize_annotate_function(funname ? funname : "??", 0, level);
-! else
-! fputs_demangled (funname ? funname : "??", stdout, 0);
- wrap_here (" ");
- fputs_filtered (" (", stdout);
- if (args)
-***************
-*** 255,261 ****
- {
- if (addressprint && mid_statement)
- printf_filtered ("%s\t", local_hex_string(fi->pc));
-! print_source_lines (sal.symtab, sal.line, sal.line + 1, 0);
- }
- current_source_line = max (sal.line - lines_to_list/2, 1);
- }
---- 261,268 ----
- {
- if (addressprint && mid_statement)
- printf_filtered ("%s\t", local_hex_string(fi->pc));
-! if (!energize)
-! print_source_lines (sal.symtab, sal.line, sal.line + 1, 0);
- }
- current_source_line = max (sal.line - lines_to_list/2, 1);
- }
-***************
-*** 429,435 ****
- if (funname)
- {
- printf_filtered (" in ");
-! fputs_demangled (funname, stdout, DMGL_ANSI | DMGL_PARAMS);
- }
- wrap_here (" ");
- if (sal.symtab)
---- 436,446 ----
- if (funname)
- {
- printf_filtered (" in ");
-! if (energize)
-! energize_annotate_function(funname, DMGL_ANSI | DMGL_PARAMS,
-! selected_frame_level);
-! else
-! fputs_demangled (funname, stdout, DMGL_ANSI | DMGL_PARAMS);
- }
- wrap_here (" ");
- if (sal.symtab)
-===================================================================
-*** 1.58 1992/09/19 16:55:36
---- symfile.c 1992/09/25 23:48:39
-***************
-*** 614,619 ****
---- 614,621 ----
- fflush (stdout);
- }
-
-+ energize_symbol_file(objfile);
-+
- return (objfile);
- }
-
-===================================================================
-*** 1.62 1992/09/18 09:21:36
---- utils.c 1992/09/25 23:48:47
-***************
-*** 700,720 ****
- fflush (stdout);
- va_start (args);
- ctlstr = va_arg (args, char *);
- vfprintf_filtered (stdout, ctlstr, args);
-- va_end (args);
- printf_filtered ("(y or n) ");
-! fflush (stdout);
-! answer = fgetc (stdin);
-! clearerr (stdin); /* in case of C-d */
-! if (answer == EOF) /* C-d */
-! return 1;
-! if (answer != '\n') /* Eat rest of input line, to EOF or newline */
-! do
-! {
-! ans2 = fgetc (stdin);
-! clearerr (stdin);
-! }
-! while (ans2 != EOF && ans2 != '\n');
- if (answer >= 'a')
- answer -= 040;
- if (answer == 'Y')
---- 700,731 ----
- fflush (stdout);
- va_start (args);
- ctlstr = va_arg (args, char *);
-+ energize_query (ctlstr, args);
- vfprintf_filtered (stdout, ctlstr, args);
- printf_filtered ("(y or n) ");
-! if (energize)
-! {
-! char *buf;
-!
-! buf = energize_command_line_input(0, 0);
-! answer = buf ? *buf : 'Y';
-! energize_acknowledge_query(buf);
-! }
-! else
-! {
-! fflush (stdout);
-! answer = fgetc (stdin);
-! clearerr (stdin); /* in case of C-d */
-! if (answer == EOF) /* C-d */
-! return 1;
-! if (answer != '\n') /* Eat rest of input line, to EOF or newline */
-! do
-! {
-! ans2 = fgetc (stdin);
-! clearerr (stdin);
-! }
-! while (ans2 != EOF && ans2 != '\n');
-! }
- if (answer >= 'a')
- answer -= 040;
- if (answer == 'Y')
-***************
-*** 722,727 ****
---- 733,739 ----
- if (answer == 'N')
- return 0;
- printf_filtered ("Please answer y or n.\n");
-+ va_end (args);
- }
- }
-
-***************
-*** 1000,1005 ****
---- 1012,1023 ----
- if (linebuffer == 0)
- return;
-
-+ if (energize)
-+ {
-+ energize_fputs(linebuffer);
-+ return;
-+ }
-+
- /* Don't do any filtering if it is disabled. */
- if (stream != stdout
- || (lines_per_page == UINT_MAX && chars_per_line == UINT_MAX))
-===================================================================
-*** 1.54 1992/09/15 06:27:03
---- valprint.c 1992/09/15 06:30:13
-***************
-*** 488,493 ****
---- 488,494 ----
- struct type **dont_print;
- {
- int i, len, n_baseclasses;
-+ char expr_tag[100]; /* Energize */
-
- check_stub_type (type);
-
-***************
-*** 552,557 ****
---- 553,565 ----
- fprint_symbol (stream, TYPE_FIELD_NAME (type, i));
- fputs_filtered (" = ", stream);
- }
-+
-+ sprintf(expr_tag, ".%s", TYPE_FIELD_NAME(type, i));
-+
-+ energize_start_variable_annotation(expr_tag, NULL,
-+ TYPE_FIELD_TYPE(type, i),
-+ (CORE_ADDR) (valaddr + TYPE_FIELD_BITPOS(type, i) / 8),
-+ "");
- if (TYPE_FIELD_PACKED (type, i))
- {
- value v;
-***************
-*** 570,575 ****
---- 578,584 ----
- valaddr + TYPE_FIELD_BITPOS (type, i) / 8,
- 0, stream, format, 0, recurse + 1, pretty);
- }
-+ energize_end_variable_annotation();
- }
- if (pretty)
- {
-***************
-*** 804,809 ****
---- 813,819 ----
- unsigned int rep1;
- /* Number of repetitions we have detected so far. */
- unsigned int reps;
-+ char expr_tag[100]; /* Energize */
-
- if (i != 0)
- if (arrayprint)
-***************
-*** 825,830 ****
---- 835,845 ----
- ++rep1;
- }
-
-+ sprintf(expr_tag, "[%d]", i);
-+ energize_start_variable_annotation(expr_tag, NULL,
-+ elttype,
-+ (CORE_ADDR) (valaddr + i * eltlen),
-+ "");
- if (reps > REPEAT_COUNT_THRESHOLD)
- {
- val_print (elttype, valaddr + i * eltlen,
-***************
-*** 841,846 ****
---- 856,862 ----
- recurse + 1, pretty);
- things_printed++;
- }
-+ energize_end_variable_annotation();
- }
- if (i < len)
- fprintf_filtered (stream, "...");
-===================================================================
-*** 1.4 1992/06/10 02:05:16
---- config/amix.mh 1992/07/21 20:18:16
-***************
-*** 22,24 ****
---- 22,38 ----
-
- # SVR4 puts the BSD compatible install in /usr/ucb.
- INSTALL = /usr/ucb/install -c
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl
-===================================================================
-*** 1.4 1992/06/15 19:25:13
---- config/ncr3000.mh 1992/09/15 01:51:32
-***************
-*** 38,40 ****
---- 38,59 ----
- # The /usr/ucb/install program is incompatible (complains about unknown
- # group staff). Use good old cp...
- INSTALL = cp
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ XM_CLIBS = -L/usr/lib -lm -lnet -lresolv -lform -lsocket -lnsl -lc
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl
projects / deliverable / binutils-gdb.git / blobdiff