/* Top level stuff for GDB, the GNU debugger.
- Copyright 1999, 2000, 2001, 2002, 2004 Free Software Foundation, Inc.
+
+ Copyright (C) 1999, 2000, 2001, 2002, 2004, 2005, 2007
+ Free Software Foundation, Inc.
+
Written by Elena Zannoni <ezannoni@cygnus.com> of Cygnus Solutions.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "top.h"
#include "event-top.h"
#include "interps.h"
#include <signal.h>
+#include "exceptions.h"
+#include "cli/cli-script.h" /* for reset_command_nest_depth */
/* For dont_repeat() */
#include "gdbcmd.h"
/* readline include files */
-#include <readline/readline.h>
-#include <readline/history.h>
+#include "readline/readline.h"
+#include "readline/history.h"
/* readline defines this. */
#undef savestring
static void change_line_handler (void);
static void change_annotation_level (void);
static void command_handler (char *command);
-static void async_do_nothing (gdb_client_data arg);
-static void async_disconnect (gdb_client_data arg);
-static void async_stop_sig (gdb_client_data arg);
-static void async_float_handler (gdb_client_data arg);
/* Signal handlers. */
+#ifdef SIGQUIT
static void handle_sigquit (int sig);
+#endif
+#ifdef SIGHUP
static void handle_sighup (int sig);
+#endif
static void handle_sigfpe (int sig);
#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
static void handle_sigwinch (int sig);
/* Functions to be invoked by the event loop in response to
signals. */
+#if defined (SIGQUIT) || defined (SIGHUP)
static void async_do_nothing (gdb_client_data);
+#endif
+#ifdef SIGHUP
static void async_disconnect (gdb_client_data);
+#endif
static void async_float_handler (gdb_client_data);
+#ifdef STOP_SIGNAL
static void async_stop_sig (gdb_client_data);
+#endif
/* Readline offers an alternate interface, via callback
functions. These are all included in the file callback.c in the
#ifdef SIGHUP
void *sighup_token;
#endif
+#ifdef SIGQUIT
void *sigquit_token;
+#endif
void *sigfpe_token;
#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
void *sigwinch_token;
int prompt_length = 0;
char *gdb_prompt = get_prompt ();
+ /* Reset the nesting depth used when trace-commands is set. */
+ reset_command_nest_depth ();
+
/* Each interpreter has its own rules on displaying the command
prompt. */
if (!current_interp_display_prompt_p ())
{
/* The prompt stack has not been initialized to "", we are
using gdb w/o the --async switch */
- warning ("Command has same effect as set annotate");
+ warning (_("Command has same effect as set annotate"));
return;
}
{
if (error)
{
- printf_unfiltered ("error detected on stdin\n");
+ printf_unfiltered (_("error detected on stdin\n"));
delete_file_handler (input_fd);
discard_all_continuations ();
/* If stdin died, we may as well kill gdb. */
but GDB is still alive. In such a case, we just quit gdb
killing the inferior program too. */
if (command == 0)
- quit_command ((char *) 0, stdin == instream);
+ {
+ printf_unfiltered ("quit\n");
+ execute_command ("quit", stdin == instream);
+ }
time_at_cmd_start = get_run_time ();
{
long cmd_time = get_run_time () - time_at_cmd_start;
- printf_unfiltered ("Command execution time: %ld.%06ld\n",
+ printf_unfiltered (_("Command execution time: %ld.%06ld\n"),
cmd_time / 1000000, cmd_time % 1000000);
}
long space_now = lim - lim_at_start;
long space_diff = space_now - space_at_cmd_start;
- printf_unfiltered ("Space used: %ld (%c%ld for this command)\n",
+ printf_unfiltered (_("Space used: %ld (%c%ld for this command)\n"),
space_now,
(space_diff >= 0 ? '+' : '-'),
space_diff);
{
long cmd_time = get_run_time () - time_at_cmd_start;
- printf_unfiltered ("Command execution time: %ld.%06ld\n",
+ printf_unfiltered (_("Command execution time: %ld.%06ld\n"),
cmd_time / 1000000, cmd_time % 1000000);
}
if (display_space)
long space_now = lim - lim_at_start;
long space_diff = space_now - space_at_cmd_start;
- printf_unfiltered ("Space used: %ld (%c%ld for this command)\n",
+ printf_unfiltered (_("Space used: %ld (%c%ld for this command)\n"),
space_now,
(space_diff >= 0 ? '+' : '-'),
space_diff);
if (annotation_level > 1 && instream == stdin)
{
- printf_unfiltered ("\n\032\032post-");
+ printf_unfiltered (("\n\032\032post-"));
puts_unfiltered (async_annotation_suffix);
- printf_unfiltered ("\n");
+ printf_unfiltered (("\n"));
}
if (linebuffer == 0)
gdb_flush (gdb_stderr);
if (source_file_name != NULL)
- {
- ++source_line_number;
- sprintf (source_error,
- "%s%s:%d: Error in sourced command file:\n",
- source_pre_error,
- source_file_name,
- source_line_number);
- error_pre_print = source_error;
- }
+ ++source_line_number;
/* If we are in this case, then command_handler will call quit
and exit from gdb. */
}
if (c == '\n')
-#ifndef CRLF_SOURCE_FILES
- break;
-#else
{
if (input_index > 0 && result[input_index - 1] == '\r')
input_index--;
break;
}
-#endif
result[input_index++] = c;
while (input_index >= result_size)
signal (SIGINT, handle_sigint);
sigint_token =
create_async_signal_handler (async_request_quit, NULL);
+ signal (SIGTERM, handle_sigterm);
/* If SIGTRAP was set to SIG_IGN, then the SIG_IGN will get passed
to the inferior and breakpoints will be ignored. */
signal (SIGTRAP, SIG_DFL);
#endif
+#ifdef SIGQUIT
/* If we initialize SIGQUIT to SIG_IGN, then the SIG_IGN will get
passed to the inferior, which we don't want. It would be
possible to do a "signal (SIGQUIT, SIG_DFL)" after we fork, but
signal (SIGQUIT, handle_sigquit);
sigquit_token =
create_async_signal_handler (async_do_nothing, NULL);
+#endif
#ifdef SIGHUP
if (signal (SIGHUP, handle_sighup) != SIG_IGN)
sighup_token =
{
signal (sig, handle_sigint);
+ /* We could be running in a loop reading in symfiles or something so
+ it may be quite a while before we get back to the event loop. So
+ set quit_flag to 1 here. Then if QUIT is called before we get to
+ the event loop, we will unwind as expected. */
+
+ quit_flag = 1;
+
/* If immediate_quit is set, we go ahead and process the SIGINT right
away, even if we usually would defer this to the event loop. The
assumption here is that it is safe to process ^C immediately if
mark_async_signal_handler_wrapper (sigint_token);
}
+/* Quit GDB if SIGTERM is received.
+ GDB would quit anyway, but this way it will clean up properly. */
+void
+handle_sigterm (int sig)
+{
+ signal (sig, handle_sigterm);
+ quit_force ((char *) 0, stdin == instream);
+}
+
/* Do the quit. All the checks have been done by the caller. */
void
async_request_quit (gdb_client_data arg)
{
- quit_flag = 1;
- quit ();
+ /* If the quit_flag has gotten reset back to 0 by the time we get
+ back here, that means that an exception was thrown to unwind the
+ current command before we got back to the event loop. So there
+ is no reason to call quit again here, unless immediate_quit is
+ set.*/
+
+ if (quit_flag || immediate_quit)
+ quit ();
}
+#ifdef SIGQUIT
/* Tell the event loop what to do if SIGQUIT is received.
See event-signal.c. */
static void
mark_async_signal_handler_wrapper (sigquit_token);
signal (sig, handle_sigquit);
}
+#endif
-/* Called by the event loop in response to a SIGQUIT. */
+#if defined (SIGQUIT) || defined (SIGHUP)
+/* Called by the event loop in response to a SIGQUIT or an
+ ignored SIGHUP. */
static void
async_do_nothing (gdb_client_data arg)
{
/* Empty function body. */
}
+#endif
#ifdef SIGHUP
/* Tell the event loop what to do if SIGHUP is received.
{
/* This message is based on ANSI C, section 4.7. Note that integer
divide by zero causes this, so "float" is a misnomer. */
- error ("Erroneous arithmetic operation.");
+ error (_("Erroneous arithmetic operation."));
}
/* Tell the event loop what to do if SIGWINCH is received.
void
gdb_setup_readline (void)
{
- /* This function is a noop for the sync case. The assumption is that
- the sync setup is ALL done in gdb_init, and we would only mess it up
- here. The sync stuff should really go away over time. */
-
- if (event_loop_p)
+ /* This function is a noop for the sync case. The assumption is
+ that the sync setup is ALL done in gdb_init, and we would only
+ mess it up here. The sync stuff should really go away over
+ time. */
+ extern int batch_silent;
+
+ if (!batch_silent)
+ gdb_stdout = stdio_fileopen (stdout);
+ gdb_stderr = stdio_fileopen (stderr);
+ gdb_stdlog = gdb_stderr; /* for moment */
+ gdb_stdtarg = gdb_stderr; /* for moment */
+
+ /* If the input stream is connected to a terminal, turn on
+ editing. */
+ if (ISATTY (instream))
{
- gdb_stdout = stdio_fileopen (stdout);
- gdb_stderr = stdio_fileopen (stderr);
- gdb_stdlog = gdb_stderr; /* for moment */
- gdb_stdtarg = gdb_stderr; /* for moment */
-
- /* If the input stream is connected to a terminal, turn on
- editing. */
- if (ISATTY (instream))
- {
- /* Tell gdb that we will be using the readline library. This
- could be overwritten by a command in .gdbinit like 'set
- editing on' or 'off'. */
- async_command_editing_p = 1;
+ /* Tell gdb that we will be using the readline library. This
+ could be overwritten by a command in .gdbinit like 'set
+ editing on' or 'off'. */
+ async_command_editing_p = 1;
- /* When a character is detected on instream by select or
- poll, readline will be invoked via this callback
- function. */
- call_readline = rl_callback_read_char_wrapper;
- }
- else
- {
- async_command_editing_p = 0;
- call_readline = gdb_readline2;
- }
-
- /* When readline has read an end-of-line character, it passes
- the complete line to gdb for processing. command_line_handler
- is the function that does this. */
- input_handler = command_line_handler;
-
- /* Tell readline to use the same input stream that gdb uses. */
- rl_instream = instream;
-
- /* Get a file descriptor for the input stream, so that we can
- register it with the event loop. */
- input_fd = fileno (instream);
-
- /* Now we need to create the event sources for the input file
- descriptor. */
- /* At this point in time, this is the only event source that we
- register with the even loop. Another source is going to be
- the target program (inferior), but that must be registered
- only when it actually exists (I.e. after we say 'run' or
- after we connect to a remote target. */
- add_file_handler (input_fd, stdin_event_handler, 0);
+ /* When a character is detected on instream by select or poll,
+ readline will be invoked via this callback function. */
+ call_readline = rl_callback_read_char_wrapper;
}
+ else
+ {
+ async_command_editing_p = 0;
+ call_readline = gdb_readline2;
+ }
+
+ /* When readline has read an end-of-line character, it passes the
+ complete line to gdb for processing. command_line_handler is the
+ function that does this. */
+ input_handler = command_line_handler;
+
+ /* Tell readline to use the same input stream that gdb uses. */
+ rl_instream = instream;
+
+ /* Get a file descriptor for the input stream, so that we can
+ register it with the event loop. */
+ input_fd = fileno (instream);
+
+ /* Now we need to create the event sources for the input file
+ descriptor. */
+ /* At this point in time, this is the only event source that we
+ register with the even loop. Another source is going to be the
+ target program (inferior), but that must be registered only when
+ it actually exists (I.e. after we say 'run' or after we connect
+ to a remote target. */
+ add_file_handler (input_fd, stdin_event_handler, 0);
}
/* Disable command input through the standard CLI channels. Used in
void
gdb_disable_readline (void)
{
- if (event_loop_p)
- {
- /* FIXME - It is too heavyweight to delete and remake these
- every time you run an interpreter that needs readline.
- It is probably better to have the interpreters cache these,
- which in turn means that this needs to be moved into interpreter
- specific code. */
+ /* FIXME - It is too heavyweight to delete and remake these every
+ time you run an interpreter that needs readline. It is probably
+ better to have the interpreters cache these, which in turn means
+ that this needs to be moved into interpreter specific code. */
#if 0
- ui_file_delete (gdb_stdout);
- ui_file_delete (gdb_stderr);
- gdb_stdlog = NULL;
- gdb_stdtarg = NULL;
+ ui_file_delete (gdb_stdout);
+ ui_file_delete (gdb_stderr);
+ gdb_stdlog = NULL;
+ gdb_stdtarg = NULL;
#endif
- rl_callback_handler_remove ();
- delete_file_handler (input_fd);
- }
+ rl_callback_handler_remove ();
+ delete_file_handler (input_fd);
}
projects / deliverable / binutils-gdb.git / blobdiff