/* Top level stuff for GDB, the GNU debugger.
- Copyright (C) 1999-2016 Free Software Foundation, Inc.
+ Copyright (C) 1999-2017 Free Software Foundation, Inc.
Written by Elena Zannoni <ezannoni@cygnus.com> of Cygnus Solutions.
/* readline defines this. */
#undef savestring
-static void command_line_handler (char *rl);
-static void change_line_handler (void);
-static char *top_level_prompt (void);
+static std::string top_level_prompt ();
/* Signal handlers. */
#ifdef SIGQUIT
static void async_disconnect (gdb_client_data);
#endif
static void async_float_handler (gdb_client_data);
-#ifdef STOP_SIGNAL
-static void async_stop_sig (gdb_client_data);
+#ifdef SIGTSTP
+static void async_sigtstp_handler (gdb_client_data);
#endif
static void async_sigterm_handler (gdb_client_data arg);
ezannoni: as of 1999-04-29 I expect that this
variable will not be used after gdb is changed to use the event
loop as default engine, and event-top.c is merged into top.c. */
-int async_command_editing_p;
+int set_editing_cmd_var;
/* This is used to display the notification of the completion of an
asynchronous execution command. */
static struct async_signal_handler *sigquit_token;
#endif
static struct async_signal_handler *sigfpe_token;
-#ifdef STOP_SIGNAL
+#ifdef SIGTSTP
static struct async_signal_handler *sigtstp_token;
#endif
static struct async_signal_handler *async_sigterm_token;
sjlj-based TRY/CATCH mechanism, which knows to handle multiple
levels of active setjmp/longjmp frames, needed in order to handle
the readline callback recursing, as happens with e.g., secondary
- prompts / queries, through gdb_readline_wrapper. */
+ prompts / queries, through gdb_readline_wrapper. This must be
+ noexcept in order to avoid problems with mixing sjlj and
+ (sjlj-based) C++ exceptions. */
-static void
-gdb_rl_callback_read_char_wrapper (gdb_client_data client_data)
+static struct gdb_exception
+gdb_rl_callback_read_char_wrapper_noexcept () noexcept
{
struct gdb_exception gdb_expt = exception_none;
}
END_CATCH_SJLJ
+ return gdb_expt;
+}
+
+static void
+gdb_rl_callback_read_char_wrapper (gdb_client_data client_data)
+{
+ struct gdb_exception gdb_expt
+ = gdb_rl_callback_read_char_wrapper_noexcept ();
+
/* Rethrow using the normal EH mechanism. */
if (gdb_expt.reason < 0)
throw_exception (gdb_expt);
/* GDB's readline callback handler. Calls the current INPUT_HANDLER,
and propagates GDB exceptions/errors thrown from INPUT_HANDLER back
- across readline. See gdb_rl_callback_read_char_wrapper. */
+ across readline. See gdb_rl_callback_read_char_wrapper. This must
+ be noexcept in order to avoid problems with mixing sjlj and
+ (sjlj-based) C++ exceptions. */
static void
-gdb_rl_callback_handler (char *rl)
+gdb_rl_callback_handler (char *rl) noexcept
{
struct gdb_exception gdb_rl_expt = exception_none;
struct ui *ui = current_ui;
throw_exception_sjlj (gdb_rl_expt);
}
-/* Initialize all the necessary variables, start the event loop,
- register readline, and stdin, start the loop. The DATA is the
- interpreter data cookie, ignored for now. */
-
-void
-cli_command_loop (void *data)
-{
- display_gdb_prompt (0);
-
- /* Now it's time to start the event loop. */
- start_event_loop ();
-}
-
/* Change the function to be invoked every time there is a character
ready on stdin. This is used when the user sets the editing off,
therefore bypassing readline, and letting gdb handle the input
itself, via gdb_readline_no_editing_callback. Also it is used in
the opposite case in which the user sets editing on again, by
- restoring readline handling of the input. */
-static void
-change_line_handler (void)
+ restoring readline handling of the input.
+
+ NOTE: this operates on input_fd, not instream. If we are reading
+ commands from a file, instream will point to the file. However, we
+ always read commands from a file with editing off. This means that
+ the 'set editing on/off' will have effect only on the interactive
+ session. */
+
+void
+change_line_handler (int editing)
{
struct ui *ui = current_ui;
- /* NOTE: this operates on input_fd, not instream. If we are reading
- commands from a file, instream will point to the file. However in
- async mode, we always read commands from a file with editing
- off. This means that the 'set editing on/off' will have effect
- only on the interactive session. */
+ /* We can only have one instance of readline, so we only allow
+ editing on the main UI. */
+ if (ui != main_ui)
+ return;
+
+ /* Don't try enabling editing if the interpreter doesn't support it
+ (e.g., MI). */
+ if (!interp_supports_command_editing (top_level_interpreter ())
+ || !interp_supports_command_editing (command_interp ()))
+ return;
- if (async_command_editing_p)
+ if (editing)
{
+ gdb_assert (ui == main_ui);
+
/* Turn on editing by using readline. */
ui->call_readline = gdb_rl_callback_read_char_wrapper;
- ui->input_handler = command_line_handler;
}
else
{
/* Turn off editing by using gdb_readline_no_editing_callback. */
- gdb_rl_callback_handler_remove ();
+ if (ui->command_editing)
+ gdb_rl_callback_handler_remove ();
ui->call_readline = gdb_readline_no_editing_callback;
-
- /* Set up the command handler as well, in case we are called as
- first thing from .gdbinit. */
- ui->input_handler = command_line_handler;
}
+ ui->command_editing = editing;
}
/* The functions below are wrappers for rl_callback_handler_remove and
void
gdb_rl_callback_handler_remove (void)
{
+ gdb_assert (current_ui == main_ui);
+
rl_callback_handler_remove ();
callback_handler_installed = 0;
}
void
gdb_rl_callback_handler_install (const char *prompt)
{
+ gdb_assert (current_ui == main_ui);
+
/* Calling rl_callback_handler_install resets readline's input
buffer. Calling this when we were already processing input
therefore loses input. */
void
gdb_rl_callback_handler_reinstall (void)
{
+ gdb_assert (current_ui == main_ui);
+
if (!callback_handler_installed)
{
/* Passing NULL as prompt argument tells readline to not display
void
display_gdb_prompt (const char *new_prompt)
{
- char *actual_gdb_prompt = NULL;
- struct cleanup *old_chain;
+ std::string actual_gdb_prompt;
annotate_display_prompt ();
/* Reset the nesting depth used when trace-commands is set. */
reset_command_nest_depth ();
- old_chain = make_cleanup (free_current_contents, &actual_gdb_prompt);
-
/* Do not call the python hook on an explicit prompt change as
passed to this function, as this forms a secondary/local prompt,
IE, displayed but not set. */
if (! new_prompt)
{
- if (sync_execution)
+ struct ui *ui = current_ui;
+
+ if (ui->prompt_state == PROMPTED)
+ internal_error (__FILE__, __LINE__, _("double prompt"));
+ else if (ui->prompt_state == PROMPT_BLOCKED)
{
/* This is to trick readline into not trying to display the
prompt. Even though we display the prompt using this
the above two functions. Calling
rl_callback_handler_remove(), does the job. */
- gdb_rl_callback_handler_remove ();
- do_cleanups (old_chain);
+ if (current_ui->command_editing)
+ gdb_rl_callback_handler_remove ();
return;
}
- else
+ else if (ui->prompt_state == PROMPT_NEEDED)
{
/* Display the top level prompt. */
actual_gdb_prompt = top_level_prompt ();
+ ui->prompt_state = PROMPTED;
}
}
else
- actual_gdb_prompt = xstrdup (new_prompt);
+ actual_gdb_prompt = new_prompt;
- if (async_command_editing_p)
+ if (current_ui->command_editing)
{
gdb_rl_callback_handler_remove ();
- gdb_rl_callback_handler_install (actual_gdb_prompt);
+ gdb_rl_callback_handler_install (actual_gdb_prompt.c_str ());
}
/* new_prompt at this point can be the top of the stack or the one
passed in. It can't be NULL. */
/* Don't use a _filtered function here. It causes the assumed
character position to be off, since the newline we read from
the user is not accounted for. */
- fputs_unfiltered (actual_gdb_prompt, gdb_stdout);
+ fputs_unfiltered (actual_gdb_prompt.c_str (), gdb_stdout);
gdb_flush (gdb_stdout);
}
-
- do_cleanups (old_chain);
}
/* Return the top level prompt, as specified by "set prompt", possibly
overriden by the python gdb.prompt_hook hook, and then composed
- with the prompt prefix and suffix (annotations). The caller is
- responsible for freeing the returned string. */
+ with the prompt prefix and suffix (annotations). */
-static char *
+static std::string
top_level_prompt (void)
{
char *prompt;
beginning. */
const char suffix[] = "\n\032\032prompt\n";
- return concat (prefix, prompt, suffix, (char *) NULL);
+ return std::string (prefix) + prompt + suffix;
}
- return xstrdup (prompt);
-}
-
-/* The main UI. */
-static struct ui main_ui_;
-
-struct ui *main_ui = &main_ui_;
-struct ui *current_ui = &main_ui_;
-struct ui *ui_list = &main_ui_;
-
-/* Cleanup that restores the current UI. */
-
-static void
-restore_ui_cleanup (void *data)
-{
- current_ui = (struct ui *) data;
+ return prompt;
}
/* See top.h. */
-void
-switch_thru_all_uis_init (struct switch_thru_all_uis *state)
-{
- state->iter = ui_list;
- state->old_chain = make_cleanup (restore_ui_cleanup, current_ui);
-}
-
-/* See top.h. */
-
-int
-switch_thru_all_uis_cond (struct switch_thru_all_uis *state)
-{
- if (state->iter != NULL)
- {
- current_ui = state->iter;
- return 1;
- }
- else
- {
- do_cleanups (state->old_chain);
- return 0;
- }
-}
-
-/* See top.h. */
-
-void
-switch_thru_all_uis_next (struct switch_thru_all_uis *state)
-{
- state->iter = state->iter->next;
-}
+struct ui *main_ui;
+struct ui *current_ui;
+struct ui *ui_list;
/* Get a pointer to the current UI's line buffer. This is used to
construct a whole line of input from partial input. */
{
struct ui *ui = (struct ui *) client_data;
- /* Switch to the UI whose input descriptor woke up the event
- loop. */
- current_ui = ui;
-
if (error)
{
- printf_unfiltered (_("error detected on stdin\n"));
+ /* Switch to the main UI, so diagnostics always go there. */
+ current_ui = main_ui;
+
delete_file_handler (ui->input_fd);
- /* If stdin died, we may as well kill gdb. */
- quit_command ((char *) 0, stdin == ui->instream);
+ if (main_ui == ui)
+ {
+ /* If stdin died, we may as well kill gdb. */
+ printf_unfiltered (_("error detected on stdin\n"));
+ quit_command ((char *) 0, 0);
+ }
+ else
+ {
+ /* Simply delete the UI. */
+ delete ui;
+ }
}
else
{
- /* This makes sure a ^C immediately followed by further input is
- always processed in that order. E.g,. with input like
- "^Cprint 1\n", the SIGINT handler runs, marks the async signal
- handler, and then select/poll may return with stdin ready,
- instead of -1/EINTR. The
- gdb.base/double-prompt-target-event-error.exp test exercises
- this. */
+ /* Switch to the UI whose input descriptor woke up the event
+ loop. */
+ current_ui = ui;
+
+ /* This makes sure a ^C immediately followed by further input is
+ always processed in that order. E.g,. with input like
+ "^Cprint 1\n", the SIGINT handler runs, marks the async
+ signal handler, and then select/poll may return with stdin
+ ready, instead of -1/EINTR. The
+ gdb.base/double-prompt-target-event-error.exp test exercises
+ this. */
QUIT;
do
{
call_stdin_event_handler_again_p = 0;
ui->call_readline (client_data);
- } while (call_stdin_event_handler_again_p != 0);
+ }
+ while (call_stdin_event_handler_again_p != 0);
}
}
+/* See top.h. */
+
+void
+ui_register_input_event_handler (struct ui *ui)
+{
+ add_file_handler (ui->input_fd, stdin_event_handler, ui);
+}
+
+/* See top.h. */
+
+void
+ui_unregister_input_event_handler (struct ui *ui)
+{
+ delete_file_handler (ui->input_fd);
+}
+
/* Re-enable stdin after the end of an execution command in
synchronous mode, or after an error from the target, and we aborted
the exec operation. */
void
async_enable_stdin (void)
{
- if (sync_execution)
+ struct ui *ui = current_ui;
+
+ if (ui->prompt_state == PROMPT_BLOCKED)
{
- /* See NOTE in async_disable_stdin(). */
- /* FIXME: cagney/1999-09-27: Call this before clearing
- sync_execution. Current target_terminal_ours() implementations
- check for sync_execution before switching the terminal. */
- target_terminal_ours ();
- sync_execution = 0;
+ target_terminal::ours ();
+ ui_register_input_event_handler (ui);
+ ui->prompt_state = PROMPT_NEEDED;
}
}
void
async_disable_stdin (void)
{
- sync_execution = 1;
+ struct ui *ui = current_ui;
+
+ ui->prompt_state = PROMPT_BLOCKED;
+ delete_file_handler (ui->input_fd);
}
\f
a whole command. */
void
-command_handler (char *command)
+command_handler (const char *command)
{
struct ui *ui = current_ui;
- struct cleanup *stat_chain;
- char *c;
+ const char *c;
- if (ui->instream == stdin)
+ if (ui->instream == ui->stdin_stream)
reinitialize_more_filter ();
- stat_chain = make_command_stats_cleanup (1);
+ scoped_command_stats stat_reporter (true);
/* Do not execute commented lines. */
for (c = command; *c == ' ' || *c == '\t'; c++)
;
if (c[0] != '#')
{
- execute_command (command, ui->instream == stdin);
+ execute_command (command, ui->instream == ui->stdin_stream);
/* Do any commands attached to breakpoint we stopped at. */
bpstat_do_actions ();
}
-
- do_cleanups (stat_chain);
}
/* Append RL, an input line returned by readline or one of its
char *
handle_line_of_input (struct buffer *cmd_line_buffer,
- char *rl, int repeat, char *annotation_suffix)
+ char *rl, int repeat, const char *annotation_suffix)
{
struct ui *ui = current_ui;
+ int from_tty = ui->instream == ui->stdin_stream;
char *p1;
char *cmd;
command, but leave ownership of memory to the buffer . */
cmd_line_buffer->used_size = 0;
- if (annotation_level > 1 && ui->instream == stdin)
+ if (from_tty && annotation_level > 1)
{
printf_unfiltered (("\n\032\032post-"));
puts_unfiltered (annotation_suffix);
}
/* Do history expansion if that is wished. */
- if (history_expansion_p && ui->instream == stdin
- && ISATTY (ui->instream))
+ if (history_expansion_p && from_tty && input_interactive_p (current_ui))
{
char *history_value;
int expanded;
and then later fetch it from the value history and remove the
'#'. The kill ring is probably better, but some people are in
the habit of commenting things out. */
- if (*cmd != '\0' && input_from_terminal_p ())
+ if (*cmd != '\0' && from_tty && input_interactive_p (current_ui))
gdb_add_history (cmd);
/* Save into global buffer if appropriate. */
struct ui *ui = current_ui;
char *cmd;
- cmd = handle_line_of_input (line_buffer, rl, ui->instream == stdin,
- "prompt");
+ cmd = handle_line_of_input (line_buffer, rl, 1, "prompt");
if (cmd == (char *) EOF)
{
/* stdin closed. The connection with the terminal is gone.
hung up but GDB is still alive. In such a case, we just quit
gdb killing the inferior program too. */
printf_unfiltered ("quit\n");
- execute_command ("quit", stdin == ui->instream);
+ execute_command ("quit", 1);
}
else if (cmd == NULL)
{
}
else
{
+ ui->prompt_state = PROMPT_NEEDED;
+
command_handler (cmd);
- display_gdb_prompt (0);
+
+ if (ui->prompt_state != PROMPTED)
+ display_gdb_prompt (0);
}
}
{
/* Read from stdin if we are executing a user defined command.
This is the right thing for prompt_for_continue, at least. */
- c = fgetc (ui->instream ? ui->instream : stdin);
+ c = fgetc (ui->instream != NULL ? ui->instream : ui->stdin_stream);
if (c == EOF)
{
sigfpe_token =
create_async_signal_handler (async_float_handler, NULL);
-#ifdef STOP_SIGNAL
+#ifdef SIGTSTP
sigtstp_token =
- create_async_signal_handler (async_stop_sig, NULL);
+ create_async_signal_handler (async_sigtstp_handler, NULL);
#endif
}
{
if (check_quit_flag ())
{
- if (target_terminal_is_ours ())
+ if (target_terminal::is_ours ())
quit ();
else
target_pass_ctrlc ();
/* See defs.h. */
quit_handler_ftype *quit_handler = default_quit_handler;
-/* Data for make_cleanup_override_quit_handler. Wrap the previous
- handler pointer in a data struct because it's not portable to cast
- a function pointer to a data pointer, which is what make_cleanup
- expects. */
-struct quit_handler_cleanup_data
-{
- /* The previous quit handler. */
- quit_handler_ftype *prev_handler;
-};
-
-/* Cleanup call that restores the previous quit handler. */
-
-static void
-restore_quit_handler (void *arg)
-{
- struct quit_handler_cleanup_data *data
- = (struct quit_handler_cleanup_data *) arg;
-
- quit_handler = data->prev_handler;
-}
-
-/* Destructor for the quit handler cleanup. */
-
-static void
-restore_quit_handler_dtor (void *arg)
-{
- xfree (arg);
-}
-
-/* See defs.h. */
-
-struct cleanup *
-make_cleanup_override_quit_handler (quit_handler_ftype *new_quit_handler)
-{
- struct cleanup *old_chain;
- struct quit_handler_cleanup_data *data;
-
- data = XNEW (struct quit_handler_cleanup_data);
- data->prev_handler = quit_handler;
- old_chain = make_cleanup_dtor (restore_quit_handler, data,
- restore_quit_handler_dtor);
- quit_handler = new_quit_handler;
- return old_chain;
-}
-
/* Handle a SIGINT. */
void
static void
async_sigterm_handler (gdb_client_data arg)
{
- quit_force (NULL, stdin == current_ui->instream);
+ quit_force (NULL, 0);
}
/* See defs.h. */
}
#endif
-#ifdef STOP_SIGNAL
+#ifdef SIGTSTP
void
-handle_stop_sig (int sig)
+handle_sigtstp (int sig)
{
mark_async_signal_handler (sigtstp_token);
- signal (sig, handle_stop_sig);
+ signal (sig, handle_sigtstp);
}
static void
-async_stop_sig (gdb_client_data arg)
+async_sigtstp_handler (gdb_client_data arg)
{
char *prompt = get_prompt ();
-#if STOP_SIGNAL == SIGTSTP
signal (SIGTSTP, SIG_DFL);
#if HAVE_SIGPROCMASK
{
sigsetmask (0);
#endif
raise (SIGTSTP);
- signal (SIGTSTP, handle_stop_sig);
-#else
- signal (STOP_SIGNAL, handle_stop_sig);
-#endif
+ signal (SIGTSTP, handle_sigtstp);
printf_unfiltered ("%s", prompt);
gdb_flush (gdb_stdout);
nothing. */
dont_repeat ();
}
-#endif /* STOP_SIGNAL */
+#endif /* SIGTSTP */
/* Tell the event loop what to do if SIGFPE is received.
See event-signal.c. */
}
\f
-/* Called by do_setshow_command. */
-void
-set_async_editing_command (char *args, int from_tty,
- struct cmd_list_element *c)
-{
- change_line_handler ();
-}
-
/* Set things up for readline to be invoked via the alternate
interface, i.e. via a callback function
(gdb_rl_callback_read_char), and hook up instream to the event
loop. */
void
-gdb_setup_readline (void)
+gdb_setup_readline (int editing)
{
struct ui *ui = current_ui;
mess it up here. The sync stuff should really go away over
time. */
if (!batch_silent)
- gdb_stdout = stdio_fileopen (stdout);
- gdb_stderr = stderr_fileopen ();
+ gdb_stdout = new stdio_file (ui->outstream);
+ gdb_stderr = new stderr_file (ui->errstream);
gdb_stdlog = gdb_stderr; /* for moment */
gdb_stdtarg = gdb_stderr; /* for moment */
gdb_stdtargerr = gdb_stderr; /* for moment */
- /* If the input stream is connected to a terminal, turn on
- editing. */
- if (ISATTY (ui->instream))
+ /* If the input stream is connected to a terminal, turn on editing.
+ However, that is only allowed on the main UI, as we can only have
+ one instance of readline. */
+ if (ISATTY (ui->instream) && editing && ui == main_ui)
{
/* Tell gdb that we will be using the readline library. This
could be overwritten by a command in .gdbinit like 'set
editing on' or 'off'. */
- async_command_editing_p = 1;
-
+ ui->command_editing = 1;
+
/* When a character is detected on instream by select or poll,
readline will be invoked via this callback function. */
ui->call_readline = gdb_rl_callback_read_char_wrapper;
+
+ /* Tell readline to use the same input stream that gdb uses. */
+ rl_instream = ui->instream;
}
else
{
- async_command_editing_p = 0;
+ ui->command_editing = 0;
ui->call_readline = gdb_readline_no_editing_callback;
}
-
- /* When readline has read an end-of-line character, it passes the
- complete line to gdb for processing; command_line_handler is the
- function that does this. */
- ui->input_handler = command_line_handler;
-
- /* Tell readline to use the same input stream that gdb uses. */
- rl_instream = ui->instream;
/* Now create the event source for this UI's input file descriptor.
Another source is going to be the target program (inferior), but
that must be registered only when it actually exists (I.e. after
we say 'run' or after we connect to a remote target. */
- add_file_handler (ui->input_fd, stdin_event_handler, ui);
+ ui_register_input_event_handler (ui);
}
/* Disable command input through the standard CLI channels. Used in
the suspend proc for interpreters that use the standard gdb readline
interface, like the cli & the mi. */
+
void
gdb_disable_readline (void)
{
gdb_stdtargerr = NULL;
#endif
- gdb_rl_callback_handler_remove ();
+ if (ui->command_editing)
+ gdb_rl_callback_handler_remove ();
delete_file_handler (ui->input_fd);
}