/* Work with executable files, for GDB.
- Copyright (C) 1988-2015 Free Software Foundation, Inc.
+ Copyright (C) 1988-2017 Free Software Foundation, Inc.
This file is part of GDB.
#include <ctype.h>
#include <sys/stat.h>
#include "solist.h"
+#include <algorithm>
void (*deprecated_file_changed_hook) (char *);
printf_unfiltered (_("No executable file now.\n"));
}
-/* See gdbcore.h. */
+/* See exec.h. */
void
-exec_file_locate_attach (int pid, int from_tty)
+try_open_exec_file (const char *exec_file_host, struct inferior *inf,
+ symfile_add_flags add_flags)
{
- char *exec_file, *full_exec_path = NULL;
+ struct cleanup *old_chain;
+ struct gdb_exception prev_err = exception_none;
- /* Do nothing if we already have an executable filename. */
- exec_file = (char *) get_exec_file (0);
- if (exec_file != NULL)
- return;
+ old_chain = make_cleanup (free_current_contents, &prev_err.message);
- /* Try to determine a filename from the process itself. */
- exec_file = target_pid_to_exec_file (pid);
- if (exec_file == NULL)
- return;
+ /* exec_file_attach and symbol_file_add_main may throw an error if the file
+ cannot be opened either locally or remotely.
+
+ This happens for example, when the file is first found in the local
+ sysroot (above), and then disappears (a TOCTOU race), or when it doesn't
+ exist in the target filesystem, or when the file does exist, but
+ is not readable.
- /* If gdb_sysroot is not empty and the discovered filename
- is absolute then prefix the filename with gdb_sysroot. */
- if (gdb_sysroot != NULL && *gdb_sysroot != '\0'
- && IS_ABSOLUTE_PATH (exec_file))
+ Even without a symbol file, the remote-based debugging session should
+ continue normally instead of ending abruptly. Hence we catch thrown
+ errors/exceptions in the following code. */
+ TRY
{
- int fd = -1;
+ /* We must do this step even if exec_file_host is NULL, so that
+ exec_file_attach will clear state. */
+ exec_file_attach (exec_file_host, add_flags & SYMFILE_VERBOSE);
+ }
+ CATCH (err, RETURN_MASK_ERROR)
+ {
+ if (err.message != NULL)
+ warning ("%s", err.message);
+
+ prev_err = err;
- full_exec_path = exec_file_find (exec_file, &fd);
- if (fd >= 0)
- close (fd);
+ /* Save message so it doesn't get trashed by the catch below. */
+ if (err.message != NULL)
+ prev_err.message = xstrdup (err.message);
}
+ END_CATCH
+
+ if (exec_file_host != NULL)
+ {
+ TRY
+ {
+ symbol_file_add_main (exec_file_host, add_flags);
+ }
+ CATCH (err, RETURN_MASK_ERROR)
+ {
+ if (!exception_print_same (prev_err, err))
+ warning ("%s", err.message);
+ }
+ END_CATCH
+ }
+
+ do_cleanups (old_chain);
+}
- if (full_exec_path == NULL)
+/* See gdbcore.h. */
+
+void
+exec_file_locate_attach (int pid, int defer_bp_reset, int from_tty)
+{
+ char *exec_file_target, *exec_file_host;
+ struct cleanup *old_chain;
+ symfile_add_flags add_flags = 0;
+
+ /* Do nothing if we already have an executable filename. */
+ if (get_exec_file (0) != NULL)
+ return;
+
+ /* Try to determine a filename from the process itself. */
+ exec_file_target = target_pid_to_exec_file (pid);
+ if (exec_file_target == NULL)
{
- /* It's possible we don't have a full path, but rather just a
- filename. Some targets, such as HP-UX, don't provide the
- full path, sigh.
-
- Attempt to qualify the filename against the source path.
- (If that fails, we'll just fall back on the original
- filename. Not much more we can do...) */
- if (!source_full_path_of (exec_file, &full_exec_path))
- full_exec_path = xstrdup (exec_file);
+ warning (_("No executable has been specified and target does not "
+ "support\n"
+ "determining executable automatically. "
+ "Try using the \"file\" command."));
+ return;
}
- exec_file_attach (full_exec_path, from_tty);
- symbol_file_add_main (full_exec_path, from_tty);
+ exec_file_host = exec_file_find (exec_file_target, NULL);
+ old_chain = make_cleanup (xfree, exec_file_host);
+
+ if (defer_bp_reset)
+ add_flags |= SYMFILE_DEFER_BP_RESET;
+
+ if (from_tty)
+ add_flags |= SYMFILE_VERBOSE;
+
+ /* Attempt to open the exec file. */
+ try_open_exec_file (exec_file_host, current_inferior (), add_flags);
+ do_cleanups (old_chain);
}
/* Set FILENAME as the new exec file.
#if defined(__GO32__) || defined(_WIN32) || defined(__CYGWIN__)
if (scratch_chan < 0)
{
- char *exename = alloca (strlen (filename) + 5);
+ char *exename = (char *) alloca (strlen (filename) + 5);
strcat (strcpy (exename, filename), ".exe");
scratch_chan = openp (getenv ("PATH"), OPF_TRY_CWD_FIRST,
if (!exec_bfd)
{
- error (_("\"%s\": could not open as an executable file: %s"),
+ error (_("\"%s\": could not open as an executable file: %s."),
scratch_pathname, bfd_errmsg (bfd_get_error ()));
}
if (new_count)
{
- table->sections = xrealloc (table->sections,
- sizeof (struct target_section) * new_count);
+ table->sections = XRESIZEVEC (struct target_section, table->sections,
+ new_count);
table->sections_end = table->sections + new_count;
}
else
count = bfd_count_sections (some_bfd);
if (*start)
xfree (* start);
- *start = (struct target_section *) xmalloc (count * sizeof (**start));
+ *start = XNEWVEC (struct target_section, count);
*end = *start;
bfd_map_over_sections (some_bfd, add_to_section_table, (char *) end);
if (*end > *start + count)
r = VEC_safe_push (mem_range_s, memory, NULL);
- r->start = max (lo1, lo2);
- r->length = min (hi1, hi2) - r->start;
+ r->start = std::max (lo1, lo2);
+ r->length = std::min (hi1, hi2) - r->start;
}
}
enum target_xfer_status status;
/* Get the intersection window. */
- end = min (offset + len, r->start + r->length);
+ end = std::min<CORE_ADDR> (offset + len, r->start + r->length);
gdb_assert (end - offset <= len);
return 0;
}
+/* Implement the to_remove_breakpoint method. */
+
+static int
+exec_remove_breakpoint (struct target_ops *ops, struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt,
+ enum remove_bp_reason reason)
+{
+ return 0;
+}
+
static int
exec_has_memory (struct target_ops *ops)
{
exec_ops.to_get_section_table = exec_get_section_table;
exec_ops.to_files_info = exec_files_info;
exec_ops.to_insert_breakpoint = ignore;
- exec_ops.to_remove_breakpoint = ignore;
+ exec_ops.to_remove_breakpoint = exec_remove_breakpoint;
exec_ops.to_stratum = file_stratum;
exec_ops.to_has_memory = exec_has_memory;
exec_ops.to_make_corefile_notes = exec_make_note_section;