/* Find a variable's value in memory, for GDB, the GNU debugger.
- Copyright 1986, 87, 89, 91, 94, 95, 96, 1998
+ Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1997, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This file is part of GDB.
#include "gdb_string.h"
#include "floatformat.h"
#include "symfile.h" /* for overlay functions */
+#include "regcache.h"
/* This is used to indicate that we don't know the format of the floating point
number. Typically, this is useful for native ports, where the actual format
const struct floatformat floatformat_unknown;
-/* Registers we shouldn't try to store. */
-#if !defined (CANNOT_STORE_REGISTER)
-#define CANNOT_STORE_REGISTER(regno) 0
-#endif
-
-static void write_register_gen PARAMS ((int, char *));
-
-static int read_relative_register_raw_bytes_for_frame PARAMS ((int regnum, char *myaddr, struct frame_info * frame));
-
/* Basic byte-swapping routines. GDB has needed these for a long time...
All extract a target-format integer at ADDR which is LEN bytes long. */
}
-#ifndef POINTER_TO_ADDRESS
-#define POINTER_TO_ADDRESS generic_pointer_to_address
-#endif
-
/* Treat the bytes at BUF as a pointer of type TYPE, and return the
address it represents. */
CORE_ADDR
{
if (TYPE_CODE (type) != TYPE_CODE_PTR
&& TYPE_CODE (type) != TYPE_CODE_REF)
- internal_error ("findvar.c (extract_typed_address): "
+ internal_error (__FILE__, __LINE__,
+ "extract_typed_address: "
"type is not a pointer or reference");
return POINTER_TO_ADDRESS (type, buf);
}
-#ifndef ADDRESS_TO_POINTER
-#define ADDRESS_TO_POINTER generic_address_to_pointer
-#endif
-
/* Store the address ADDR as a pointer of type TYPE at BUF, in target
form. */
void
{
if (TYPE_CODE (type) != TYPE_CODE_PTR
&& TYPE_CODE (type) != TYPE_CODE_REF)
- internal_error ("findvar.c (store_typed_address): "
+ internal_error (__FILE__, __LINE__,
+ "store_typed_address: "
"type is not a pointer or reference");
ADDRESS_TO_POINTER (type, buf, addr);
-\f
-/* Extract a floating-point number from a target-order byte-stream at ADDR.
- Returns the value as type DOUBLEST.
-
- If the host and target formats agree, we just copy the raw data into the
- appropriate type of variable and return, letting the host increase precision
- as necessary. Otherwise, we call the conversion routine and let it do the
- dirty work. */
-
-DOUBLEST
-extract_floating (void *addr, int len)
-{
- DOUBLEST dretval;
-
- if (len * TARGET_CHAR_BIT == TARGET_FLOAT_BIT)
- {
- if (HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT)
- {
- float retval;
-
- memcpy (&retval, addr, sizeof (retval));
- return retval;
- }
- else
- floatformat_to_doublest (TARGET_FLOAT_FORMAT, addr, &dretval);
- }
- else if (len * TARGET_CHAR_BIT == TARGET_DOUBLE_BIT)
- {
- if (HOST_DOUBLE_FORMAT == TARGET_DOUBLE_FORMAT)
- {
- double retval;
-
- memcpy (&retval, addr, sizeof (retval));
- return retval;
- }
- else
- floatformat_to_doublest (TARGET_DOUBLE_FORMAT, addr, &dretval);
- }
- else if (len * TARGET_CHAR_BIT == TARGET_LONG_DOUBLE_BIT)
- {
- if (HOST_LONG_DOUBLE_FORMAT == TARGET_LONG_DOUBLE_FORMAT)
- {
- DOUBLEST retval;
-
- memcpy (&retval, addr, sizeof (retval));
- return retval;
- }
- else
- floatformat_to_doublest (TARGET_LONG_DOUBLE_FORMAT, addr, &dretval);
- }
- else
- {
- error ("Can't deal with a floating point number of %d bytes.", len);
- }
-
- return dretval;
-}
-
-void
-store_floating (void *addr, int len, DOUBLEST val)
-{
- if (len * TARGET_CHAR_BIT == TARGET_FLOAT_BIT)
- {
- if (HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT)
- {
- float floatval = val;
-
- memcpy (addr, &floatval, sizeof (floatval));
- }
- else
- floatformat_from_doublest (TARGET_FLOAT_FORMAT, &val, addr);
- }
- else if (len * TARGET_CHAR_BIT == TARGET_DOUBLE_BIT)
- {
- if (HOST_DOUBLE_FORMAT == TARGET_DOUBLE_FORMAT)
- {
- double doubleval = val;
-
- memcpy (addr, &doubleval, sizeof (doubleval));
- }
- else
- floatformat_from_doublest (TARGET_DOUBLE_FORMAT, &val, addr);
- }
- else if (len * TARGET_CHAR_BIT == TARGET_LONG_DOUBLE_BIT)
- {
- if (HOST_LONG_DOUBLE_FORMAT == TARGET_LONG_DOUBLE_FORMAT)
- memcpy (addr, &val, sizeof (val));
- else
- floatformat_from_doublest (TARGET_LONG_DOUBLE_FORMAT, &val, addr);
- }
- else
- {
- error ("Can't deal with a floating point number of %d bytes.", len);
- }
-}
-\f
-
-/* Return the address in which frame FRAME's value of register REGNUM
- has been saved in memory. Or return zero if it has not been saved.
- If REGNUM specifies the SP, the value we return is actually
- the SP value, not an address where it was saved. */
-
-CORE_ADDR
-find_saved_register (frame, regnum)
- struct frame_info *frame;
- int regnum;
-{
- register struct frame_info *frame1 = NULL;
- register CORE_ADDR addr = 0;
-
- if (frame == NULL) /* No regs saved if want current frame */
- return 0;
-
-#ifdef HAVE_REGISTER_WINDOWS
- /* We assume that a register in a register window will only be saved
- in one place (since the name changes and/or disappears as you go
- towards inner frames), so we only call get_frame_saved_regs on
- the current frame. This is directly in contradiction to the
- usage below, which assumes that registers used in a frame must be
- saved in a lower (more interior) frame. This change is a result
- of working on a register window machine; get_frame_saved_regs
- always returns the registers saved within a frame, within the
- context (register namespace) of that frame. */
-
- /* However, note that we don't want this to return anything if
- nothing is saved (if there's a frame inside of this one). Also,
- callers to this routine asking for the stack pointer want the
- stack pointer saved for *this* frame; this is returned from the
- next frame. */
-
- if (REGISTER_IN_WINDOW_P (regnum))
- {
- frame1 = get_next_frame (frame);
- if (!frame1)
- return 0; /* Registers of this frame are active. */
-
- /* Get the SP from the next frame in; it will be this
- current frame. */
- if (regnum != SP_REGNUM)
- frame1 = frame;
-
- FRAME_INIT_SAVED_REGS (frame1);
- return frame1->saved_regs[regnum]; /* ... which might be zero */
- }
-#endif /* HAVE_REGISTER_WINDOWS */
-
- /* Note that this next routine assumes that registers used in
- frame x will be saved only in the frame that x calls and
- frames interior to it. This is not true on the sparc, but the
- above macro takes care of it, so we should be all right. */
- while (1)
- {
- QUIT;
- frame1 = get_prev_frame (frame1);
- if (frame1 == 0 || frame1 == frame)
- break;
- FRAME_INIT_SAVED_REGS (frame1);
- if (frame1->saved_regs[regnum])
- addr = frame1->saved_regs[regnum];
- }
-
- return addr;
-}
-
-/* Find register number REGNUM relative to FRAME and put its (raw,
- target format) contents in *RAW_BUFFER. Set *OPTIMIZED if the
- variable was optimized out (and thus can't be fetched). Set *LVAL
- to lval_memory, lval_register, or not_lval, depending on whether
- the value was fetched from memory, from a register, or in a strange
- and non-modifiable way (e.g. a frame pointer which was calculated
- rather than fetched). Set *ADDRP to the address, either in memory
- on as a REGISTER_BYTE offset into the registers array.
-
- Note that this implementation never sets *LVAL to not_lval. But
- it can be replaced by defining GET_SAVED_REGISTER and supplying
- your own.
-
- The argument RAW_BUFFER must point to aligned memory. */
-
-void
-default_get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
- char *raw_buffer;
- int *optimized;
- CORE_ADDR *addrp;
- struct frame_info *frame;
- int regnum;
- enum lval_type *lval;
-{
- CORE_ADDR addr;
-
- if (!target_has_registers)
- error ("No registers.");
-
- /* Normal systems don't optimize out things with register numbers. */
- if (optimized != NULL)
- *optimized = 0;
- addr = find_saved_register (frame, regnum);
- if (addr != 0)
- {
- if (lval != NULL)
- *lval = lval_memory;
- if (regnum == SP_REGNUM)
- {
- if (raw_buffer != NULL)
- {
- /* Put it back in target format. */
- store_address (raw_buffer, REGISTER_RAW_SIZE (regnum),
- (LONGEST) addr);
- }
- if (addrp != NULL)
- *addrp = 0;
- return;
- }
- if (raw_buffer != NULL)
- read_memory (addr, raw_buffer, REGISTER_RAW_SIZE (regnum));
- }
- else
- {
- if (lval != NULL)
- *lval = lval_register;
- addr = REGISTER_BYTE (regnum);
- if (raw_buffer != NULL)
- read_register_gen (regnum, raw_buffer);
- }
- if (addrp != NULL)
- *addrp = addr;
-}
-
-#if !defined (GET_SAVED_REGISTER)
-#define GET_SAVED_REGISTER(raw_buffer, optimized, addrp, frame, regnum, lval) \
- default_get_saved_register(raw_buffer, optimized, addrp, frame, regnum, lval)
-#endif
-void
-get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
- char *raw_buffer;
- int *optimized;
- CORE_ADDR *addrp;
- struct frame_info *frame;
- int regnum;
- enum lval_type *lval;
-{
- GET_SAVED_REGISTER (raw_buffer, optimized, addrp, frame, regnum, lval);
-}
-
-/* Copy the bytes of register REGNUM, relative to the input stack frame,
- into our memory at MYADDR, in target byte order.
- The number of bytes copied is REGISTER_RAW_SIZE (REGNUM).
-
- Returns 1 if could not be read, 0 if could. */
-
-static int
-read_relative_register_raw_bytes_for_frame (regnum, myaddr, frame)
- int regnum;
- char *myaddr;
- struct frame_info *frame;
-{
- int optim;
- if (regnum == FP_REGNUM && frame)
- {
- /* Put it back in target format. */
- store_address (myaddr, REGISTER_RAW_SIZE (FP_REGNUM),
- (LONGEST) FRAME_FP (frame));
-
- return 0;
- }
-
- get_saved_register (myaddr, &optim, (CORE_ADDR *) NULL, frame,
- regnum, (enum lval_type *) NULL);
-
- if (register_valid[regnum] < 0)
- return 1; /* register value not available */
-
- return optim;
-}
-
-/* Copy the bytes of register REGNUM, relative to the current stack frame,
- into our memory at MYADDR, in target byte order.
- The number of bytes copied is REGISTER_RAW_SIZE (REGNUM).
-
- Returns 1 if could not be read, 0 if could. */
-
-int
-read_relative_register_raw_bytes (regnum, myaddr)
- int regnum;
- char *myaddr;
-{
- return read_relative_register_raw_bytes_for_frame (regnum, myaddr,
- selected_frame);
-}
-
/* Return a `value' with the contents of register REGNUM
in its virtual format, with the type specified by
REGISTER_VIRTUAL_TYPE.
Caller will check return value or die! */
value_ptr
-value_of_register (regnum)
- int regnum;
+value_of_register (int regnum)
{
CORE_ADDR addr;
int optim;
register value_ptr reg_val;
- char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ char *raw_buffer = (char*) alloca (MAX_REGISTER_RAW_SIZE);
enum lval_type lval;
get_saved_register (raw_buffer, &optim, &addr,
selected_frame, regnum, &lval);
- if (register_valid[regnum] < 0)
+ if (register_cached (regnum) < 0)
return NULL; /* register value not available */
reg_val = allocate_value (REGISTER_VIRTUAL_TYPE (regnum));
memcpy (VALUE_CONTENTS_RAW (reg_val), raw_buffer,
REGISTER_RAW_SIZE (regnum));
else
- internal_error ("Register \"%s\" (%d) has conflicting raw (%d) and virtual (%d) size",
+ internal_error (__FILE__, __LINE__,
+ "Register \"%s\" (%d) has conflicting raw (%d) and virtual (%d) size",
REGISTER_NAME (regnum),
regnum,
REGISTER_RAW_SIZE (regnum),
VALUE_OPTIMIZED_OUT (reg_val) = optim;
return reg_val;
}
-\f
-/* Low level examining and depositing of registers.
-
- The caller is responsible for making
- sure that the inferior is stopped before calling the fetching routines,
- or it will get garbage. (a change from GDB version 3, in which
- the caller got the value from the last stop). */
-
-/* Contents and state of the registers (in target byte order). */
-
-char *registers;
-
-/* VALID_REGISTER is non-zero if it has been fetched, -1 if the
- register value was not available. */
-
-signed char *register_valid;
-
-/* The thread/process associated with the current set of registers. For now,
- -1 is special, and means `no current process'. */
-int registers_pid = -1;
-
-/* Indicate that registers may have changed, so invalidate the cache. */
-
-void
-registers_changed ()
-{
- int i;
- int numregs = ARCH_NUM_REGS;
-
- registers_pid = -1;
-
- /* Force cleanup of any alloca areas if using C alloca instead of
- a builtin alloca. This particular call is used to clean up
- areas allocated by low level target code which may build up
- during lengthy interactions between gdb and the target before
- gdb gives control to the user (ie watchpoints). */
- alloca (0);
-
- for (i = 0; i < numregs; i++)
- register_valid[i] = 0;
-
- if (registers_changed_hook)
- registers_changed_hook ();
-}
-
-/* Indicate that all registers have been fetched, so mark them all valid. */
-void
-registers_fetched ()
-{
- int i;
- int numregs = ARCH_NUM_REGS;
- for (i = 0; i < numregs; i++)
- register_valid[i] = 1;
-}
-
-/* read_register_bytes and write_register_bytes are generally a *BAD*
- idea. They are inefficient because they need to check for partial
- updates, which can only be done by scanning through all of the
- registers and seeing if the bytes that are being read/written fall
- inside of an invalid register. [The main reason this is necessary
- is that register sizes can vary, so a simple index won't suffice.]
- It is far better to call read_register_gen and write_register_gen
- if you want to get at the raw register contents, as it only takes a
- regno as an argument, and therefore can't do a partial register
- update.
-
- Prior to the recent fixes to check for partial updates, both read
- and write_register_bytes always checked to see if any registers
- were stale, and then called target_fetch_registers (-1) to update
- the whole set. This caused really slowed things down for remote
- targets. */
-
-/* Copy INLEN bytes of consecutive data from registers
- starting with the INREGBYTE'th byte of register data
- into memory at MYADDR. */
-
-void
-read_register_bytes (inregbyte, myaddr, inlen)
- int inregbyte;
- char *myaddr;
- int inlen;
-{
- int inregend = inregbyte + inlen;
- int regno;
-
- if (registers_pid != inferior_pid)
- {
- registers_changed ();
- registers_pid = inferior_pid;
- }
-
- /* See if we are trying to read bytes from out-of-date registers. If so,
- update just those registers. */
-
- for (regno = 0; regno < NUM_REGS; regno++)
- {
- int regstart, regend;
-
- if (register_valid[regno])
- continue;
-
- if (REGISTER_NAME (regno) == NULL || *REGISTER_NAME (regno) == '\0')
- continue;
-
- regstart = REGISTER_BYTE (regno);
- regend = regstart + REGISTER_RAW_SIZE (regno);
-
- if (regend <= inregbyte || inregend <= regstart)
- /* The range the user wants to read doesn't overlap with regno. */
- continue;
-
- /* We've found an invalid register where at least one byte will be read.
- Update it from the target. */
- target_fetch_registers (regno);
-
- if (!register_valid[regno])
- error ("read_register_bytes: Couldn't update register %d.", regno);
- }
-
- if (myaddr != NULL)
- memcpy (myaddr, ®isters[inregbyte], inlen);
-}
-
-/* Read register REGNO into memory at MYADDR, which must be large enough
- for REGISTER_RAW_BYTES (REGNO). Target byte-order.
- If the register is known to be the size of a CORE_ADDR or smaller,
- read_register can be used instead. */
-void
-read_register_gen (regno, myaddr)
- int regno;
- char *myaddr;
-{
- if (registers_pid != inferior_pid)
- {
- registers_changed ();
- registers_pid = inferior_pid;
- }
-
- if (!register_valid[regno])
- target_fetch_registers (regno);
- memcpy (myaddr, ®isters[REGISTER_BYTE (regno)],
- REGISTER_RAW_SIZE (regno));
-}
-
-/* Write register REGNO at MYADDR to the target. MYADDR points at
- REGISTER_RAW_BYTES(REGNO), which must be in target byte-order. */
-
-static void
-write_register_gen (regno, myaddr)
- int regno;
- char *myaddr;
-{
- int size;
-
- /* On the sparc, writing %g0 is a no-op, so we don't even want to change
- the registers array if something writes to this register. */
- if (CANNOT_STORE_REGISTER (regno))
- return;
-
- if (registers_pid != inferior_pid)
- {
- registers_changed ();
- registers_pid = inferior_pid;
- }
-
- size = REGISTER_RAW_SIZE (regno);
-
- /* If we have a valid copy of the register, and new value == old value,
- then don't bother doing the actual store. */
-
- if (register_valid[regno]
- && memcmp (®isters[REGISTER_BYTE (regno)], myaddr, size) == 0)
- return;
-
- target_prepare_to_store ();
-
- memcpy (®isters[REGISTER_BYTE (regno)], myaddr, size);
-
- register_valid[regno] = 1;
-
- target_store_registers (regno);
-}
-
-/* Copy INLEN bytes of consecutive data from memory at MYADDR
- into registers starting with the MYREGSTART'th byte of register data. */
-
-void
-write_register_bytes (myregstart, myaddr, inlen)
- int myregstart;
- char *myaddr;
- int inlen;
-{
- int myregend = myregstart + inlen;
- int regno;
-
- target_prepare_to_store ();
-
- /* Scan through the registers updating any that are covered by the range
- myregstart<=>myregend using write_register_gen, which does nice things
- like handling threads, and avoiding updates when the new and old contents
- are the same. */
-
- for (regno = 0; regno < NUM_REGS; regno++)
- {
- int regstart, regend;
-
- regstart = REGISTER_BYTE (regno);
- regend = regstart + REGISTER_RAW_SIZE (regno);
-
- /* Is this register completely outside the range the user is writing? */
- if (myregend <= regstart || regend <= myregstart)
- /* do nothing */ ;
-
- /* Is this register completely within the range the user is writing? */
- else if (myregstart <= regstart && regend <= myregend)
- write_register_gen (regno, myaddr + (regstart - myregstart));
-
- /* The register partially overlaps the range being written. */
- else
- {
- char regbuf[MAX_REGISTER_RAW_SIZE];
- /* What's the overlap between this register's bytes and
- those the caller wants to write? */
- int overlapstart = max (regstart, myregstart);
- int overlapend = min (regend, myregend);
-
- /* We may be doing a partial update of an invalid register.
- Update it from the target before scribbling on it. */
- read_register_gen (regno, regbuf);
-
- memcpy (registers + overlapstart,
- myaddr + (overlapstart - myregstart),
- overlapend - overlapstart);
-
- target_store_registers (regno);
- }
- }
-}
-
-
-/* Return the raw contents of register REGNO, regarding it as an integer. */
-/* This probably should be returning LONGEST rather than CORE_ADDR. */
-
-CORE_ADDR
-read_register (regno)
- int regno;
-{
- if (registers_pid != inferior_pid)
- {
- registers_changed ();
- registers_pid = inferior_pid;
- }
-
- if (!register_valid[regno])
- target_fetch_registers (regno);
-
- return ((CORE_ADDR)
- extract_unsigned_integer (®isters[REGISTER_BYTE (regno)],
- REGISTER_RAW_SIZE (regno)));
-}
-
-CORE_ADDR
-read_register_pid (regno, pid)
- int regno, pid;
-{
- int save_pid;
- CORE_ADDR retval;
-
- if (pid == inferior_pid)
- return read_register (regno);
-
- save_pid = inferior_pid;
-
- inferior_pid = pid;
-
- retval = read_register (regno);
-
- inferior_pid = save_pid;
-
- return retval;
-}
-
-/* Store VALUE, into the raw contents of register number REGNO.
- This should probably write a LONGEST rather than a CORE_ADDR */
-
-void
-write_register (regno, val)
- int regno;
- LONGEST val;
-{
- PTR buf;
- int size;
-
- /* On the sparc, writing %g0 is a no-op, so we don't even want to change
- the registers array if something writes to this register. */
- if (CANNOT_STORE_REGISTER (regno))
- return;
-
- if (registers_pid != inferior_pid)
- {
- registers_changed ();
- registers_pid = inferior_pid;
- }
-
- size = REGISTER_RAW_SIZE (regno);
- buf = alloca (size);
- store_signed_integer (buf, size, (LONGEST) val);
-
- /* If we have a valid copy of the register, and new value == old value,
- then don't bother doing the actual store. */
-
- if (register_valid[regno]
- && memcmp (®isters[REGISTER_BYTE (regno)], buf, size) == 0)
- return;
-
- target_prepare_to_store ();
-
- memcpy (®isters[REGISTER_BYTE (regno)], buf, size);
-
- register_valid[regno] = 1;
-
- target_store_registers (regno);
-}
-
-void
-write_register_pid (regno, val, pid)
- int regno;
- CORE_ADDR val;
- int pid;
-{
- int save_pid;
-
- if (pid == inferior_pid)
- {
- write_register (regno, val);
- return;
- }
-
- save_pid = inferior_pid;
-
- inferior_pid = pid;
-
- write_register (regno, val);
-
- inferior_pid = save_pid;
-}
-
-/* Record that register REGNO contains VAL.
- This is used when the value is obtained from the inferior or core dump,
- so there is no need to store the value there.
-
- If VAL is a NULL pointer, then it's probably an unsupported register. We
- just set it's value to all zeros. We might want to record this fact, and
- report it to the users of read_register and friends.
- */
-
-void
-supply_register (regno, val)
- int regno;
- char *val;
-{
-#if 1
- if (registers_pid != inferior_pid)
- {
- registers_changed ();
- registers_pid = inferior_pid;
- }
-#endif
-
- register_valid[regno] = 1;
- if (val)
- memcpy (®isters[REGISTER_BYTE (regno)], val, REGISTER_RAW_SIZE (regno));
- else
- memset (®isters[REGISTER_BYTE (regno)], '\000', REGISTER_RAW_SIZE (regno));
-
- /* On some architectures, e.g. HPPA, there are a few stray bits in some
- registers, that the rest of the code would like to ignore. */
-#ifdef CLEAN_UP_REGISTER_VALUE
- CLEAN_UP_REGISTER_VALUE (regno, ®isters[REGISTER_BYTE (regno)]);
-#endif
-}
-
-
-/* This routine is getting awfully cluttered with #if's. It's probably
- time to turn this into READ_PC and define it in the tm.h file.
- Ditto for write_pc.
-
- 1999-06-08: The following were re-written so that it assumes the
- existance of a TARGET_READ_PC et.al. macro. A default generic
- version of that macro is made available where needed.
-
- Since the ``TARGET_READ_PC'' et.al. macro is going to be controlled
- by the multi-arch framework, it will eventually be possible to
- eliminate the intermediate read_pc_pid(). The client would call
- TARGET_READ_PC directly. (cagney). */
-
-#ifndef TARGET_READ_PC
-#define TARGET_READ_PC generic_target_read_pc
-#endif
-
-CORE_ADDR
-generic_target_read_pc (int pid)
-{
-#ifdef PC_REGNUM
- if (PC_REGNUM >= 0)
- {
- CORE_ADDR pc_val = ADDR_BITS_REMOVE ((CORE_ADDR) read_register_pid (PC_REGNUM, pid));
- return pc_val;
- }
-#endif
- internal_error ("generic_target_read_pc");
- return 0;
-}
-
-CORE_ADDR
-read_pc_pid (pid)
- int pid;
-{
- int saved_inferior_pid;
- CORE_ADDR pc_val;
-
- /* In case pid != inferior_pid. */
- saved_inferior_pid = inferior_pid;
- inferior_pid = pid;
-
- pc_val = TARGET_READ_PC (pid);
-
- inferior_pid = saved_inferior_pid;
- return pc_val;
-}
-
-CORE_ADDR
-read_pc ()
-{
- return read_pc_pid (inferior_pid);
-}
-
-#ifndef TARGET_WRITE_PC
-#define TARGET_WRITE_PC generic_target_write_pc
-#endif
-
-void
-generic_target_write_pc (pc, pid)
- CORE_ADDR pc;
- int pid;
-{
-#ifdef PC_REGNUM
- if (PC_REGNUM >= 0)
- write_register_pid (PC_REGNUM, pc, pid);
-#ifdef NPC_REGNUM
- if (NPC_REGNUM >= 0)
- write_register_pid (NPC_REGNUM, pc + 4, pid);
-#ifdef NNPC_REGNUM
- if (NNPC_REGNUM >= 0)
- write_register_pid (NNPC_REGNUM, pc + 8, pid);
-#endif
-#endif
-#else
- internal_error ("generic_target_write_pc");
-#endif
-}
-
-void
-write_pc_pid (pc, pid)
- CORE_ADDR pc;
- int pid;
-{
- int saved_inferior_pid;
-
- /* In case pid != inferior_pid. */
- saved_inferior_pid = inferior_pid;
- inferior_pid = pid;
-
- TARGET_WRITE_PC (pc, pid);
-
- inferior_pid = saved_inferior_pid;
-}
-
-void
-write_pc (pc)
- CORE_ADDR pc;
-{
- write_pc_pid (pc, inferior_pid);
-}
-
-/* Cope with strage ways of getting to the stack and frame pointers */
-
-#ifndef TARGET_READ_SP
-#define TARGET_READ_SP generic_target_read_sp
-#endif
-
-CORE_ADDR
-generic_target_read_sp ()
-{
-#ifdef SP_REGNUM
- if (SP_REGNUM >= 0)
- return read_register (SP_REGNUM);
-#endif
- internal_error ("generic_target_read_sp");
-}
-
-CORE_ADDR
-read_sp ()
-{
- return TARGET_READ_SP ();
-}
-
-#ifndef TARGET_WRITE_SP
-#define TARGET_WRITE_SP generic_target_write_sp
-#endif
-
-void
-generic_target_write_sp (val)
- CORE_ADDR val;
-{
-#ifdef SP_REGNUM
- if (SP_REGNUM >= 0)
- {
- write_register (SP_REGNUM, val);
- return;
- }
-#endif
- internal_error ("generic_target_write_sp");
-}
-
-void
-write_sp (val)
- CORE_ADDR val;
-{
- TARGET_WRITE_SP (val);
-}
-
-#ifndef TARGET_READ_FP
-#define TARGET_READ_FP generic_target_read_fp
-#endif
-
-CORE_ADDR
-generic_target_read_fp ()
-{
-#ifdef FP_REGNUM
- if (FP_REGNUM >= 0)
- return read_register (FP_REGNUM);
-#endif
- internal_error ("generic_target_read_fp");
-}
-
-CORE_ADDR
-read_fp ()
-{
- return TARGET_READ_FP ();
-}
-
-#ifndef TARGET_WRITE_FP
-#define TARGET_WRITE_FP generic_target_write_fp
-#endif
-
-void
-generic_target_write_fp (val)
- CORE_ADDR val;
-{
-#ifdef FP_REGNUM
- if (FP_REGNUM >= 0)
- {
- write_register (FP_REGNUM, val);
- return;
- }
-#endif
- internal_error ("generic_target_write_fp");
-}
-
-void
-write_fp (val)
- CORE_ADDR val;
-{
- TARGET_WRITE_FP (val);
-}
-
/* Given a pointer of type TYPE in target form in BUF, return the
address it represents. */
CORE_ADDR
-generic_pointer_to_address (struct type *type, char *buf)
+unsigned_pointer_to_address (struct type *type, void *buf)
{
return extract_address (buf, TYPE_LENGTH (type));
}
+CORE_ADDR
+signed_pointer_to_address (struct type *type, void *buf)
+{
+ return extract_signed_integer (buf, TYPE_LENGTH (type));
+}
/* Given an address, store it as a pointer of type TYPE in target
format in BUF. */
void
-generic_address_to_pointer (struct type *type, char *buf, CORE_ADDR addr)
+unsigned_address_to_pointer (struct type *type, void *buf, CORE_ADDR addr)
{
store_address (buf, TYPE_LENGTH (type), addr);
}
+void
+address_to_signed_pointer (struct type *type, void *buf, CORE_ADDR addr)
+{
+ store_signed_integer (buf, TYPE_LENGTH (type), addr);
+}
\f
/* Will calling read_var_value or locate_var_value on SYM end
up caring what frame it is being evaluated relative to? SYM must
be non-NULL. */
int
-symbol_read_needs_frame (sym)
- struct symbol *sym;
+symbol_read_needs_frame (struct symbol *sym)
{
switch (SYMBOL_CLASS (sym))
{
If FRAME is NULL, use the selected_frame. */
value_ptr
-read_var_value (var, frame)
- register struct symbol *var;
- struct frame_info *frame;
+read_var_value (register struct symbol *var, struct frame_info *frame)
{
register value_ptr v;
struct type *type = SYMBOL_TYPE (var);
case LOC_BASEREG:
case LOC_BASEREG_ARG:
- {
- char buf[MAX_REGISTER_RAW_SIZE];
- get_saved_register (buf, NULL, NULL, frame, SYMBOL_BASEREG (var),
- NULL);
- addr = extract_address (buf, REGISTER_RAW_SIZE (SYMBOL_BASEREG (var)));
- addr += SYMBOL_VALUE (var);
- break;
- }
-
case LOC_THREAD_LOCAL_STATIC:
{
- char buf[MAX_REGISTER_RAW_SIZE];
+ value_ptr regval;
- get_saved_register (buf, NULL, NULL, frame, SYMBOL_BASEREG (var),
- NULL);
- addr = extract_address (buf, REGISTER_RAW_SIZE (SYMBOL_BASEREG (var)));
+ regval = value_from_register (lookup_pointer_type (type),
+ SYMBOL_BASEREG (var), frame);
+ if (regval == NULL)
+ error ("Value of base register not available.");
+ addr = value_as_pointer (regval);
addr += SYMBOL_VALUE (var);
break;
}
}
/* Return a value of type TYPE, stored in register REGNUM, in frame
- FRAME.
+ FRAME.
NOTE: returns NULL if register value is not available.
Caller will check return value or die! */
value_ptr
-value_from_register (type, regnum, frame)
- struct type *type;
- int regnum;
- struct frame_info *frame;
+value_from_register (struct type *type, int regnum, struct frame_info *frame)
{
- char raw_buffer[MAX_REGISTER_RAW_SIZE];
+ char *raw_buffer = (char*) alloca (MAX_REGISTER_RAW_SIZE);
CORE_ADDR addr;
int optim;
value_ptr v = allocate_value (type);
CHECK_TYPEDEF (type);
len = TYPE_LENGTH (type);
- /* Pointers on D10V are really only 16 bits, but we lie to gdb elsewhere... */
- if (GDB_TARGET_IS_D10V && TYPE_CODE (type) == TYPE_CODE_PTR)
- len = 2;
-
VALUE_REGNO (v) = regnum;
num_storage_locs = (len > REGISTER_VIRTUAL_SIZE (regnum) ?
page_regnum,
&lval);
- if (register_valid[page_regnum] == -1)
+ if (register_cached (page_regnum) == -1)
return NULL; /* register value not available */
if (lval == lval_register)
regnum,
&lval);
- if (register_valid[regnum] == -1)
+ if (register_cached (regnum) == -1)
return NULL; /* register value not available */
if (lval == lval_register)
local_regnum,
&lval);
- if (register_valid[local_regnum] == -1)
+ if (register_cached (local_regnum) == -1)
return NULL; /* register value not available */
if (regnum == local_regnum)
VALUE_ADDRESS (v) = first_addr;
}
else
- internal_error ("value_from_register: Value not stored anywhere!");
+ internal_error (__FILE__, __LINE__,
+ "value_from_register: Value not stored anywhere!");
VALUE_OPTIMIZED_OUT (v) = optim;
get_saved_register (raw_buffer, &optim, &addr, frame, regnum, &lval);
- if (register_valid[regnum] == -1)
+ if (register_cached (regnum) == -1)
return NULL; /* register value not available */
VALUE_OPTIMIZED_OUT (v) = optim;
memcpy (VALUE_CONTENTS_RAW (v), raw_buffer + VALUE_OFFSET (v), len);
}
- if (GDB_TARGET_IS_D10V
- && TYPE_CODE (type) == TYPE_CODE_PTR
- && TYPE_TARGET_TYPE (type)
- && (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_FUNC))
- {
- /* pointer to function */
- unsigned long num;
- unsigned short snum;
- snum = (unsigned short) extract_unsigned_integer (VALUE_CONTENTS_RAW (v), 2);
- num = D10V_MAKE_IADDR (snum);
- store_address (VALUE_CONTENTS_RAW (v), 4, num);
- }
- else if (GDB_TARGET_IS_D10V
- && TYPE_CODE (type) == TYPE_CODE_PTR)
- {
- /* pointer to data */
- unsigned long num;
- unsigned short snum;
- snum = (unsigned short) extract_unsigned_integer (VALUE_CONTENTS_RAW (v), 2);
- num = D10V_MAKE_DADDR (snum);
- store_address (VALUE_CONTENTS_RAW (v), 4, num);
- }
-
return v;
}
\f
address. */
value_ptr
-locate_var_value (var, frame)
- register struct symbol *var;
- struct frame_info *frame;
+locate_var_value (register struct symbol *var, struct frame_info *frame)
{
CORE_ADDR addr = 0;
struct type *type = SYMBOL_TYPE (var);
}
return 0; /* For lint -- never reached */
}
-\f
-
-static void build_findvar PARAMS ((void));
-static void
-build_findvar ()
-{
- /* We allocate some extra slop since we do a lot of memcpy's around
- `registers', and failing-soft is better than failing hard. */
- int sizeof_registers = REGISTER_BYTES + /* SLOP */ 256;
- int sizeof_register_valid = NUM_REGS * sizeof (*register_valid);
- registers = xmalloc (sizeof_registers);
- memset (registers, 0, sizeof_registers);
- register_valid = xmalloc (sizeof_register_valid);
- memset (register_valid, 0, sizeof_register_valid);
-}
-
-void _initialize_findvar PARAMS ((void));
-void
-_initialize_findvar ()
-{
- build_findvar ();
-
- register_gdbarch_swap (®isters, sizeof (registers), NULL);
- register_gdbarch_swap (®ister_valid, sizeof (register_valid), NULL);
- register_gdbarch_swap (NULL, 0, build_findvar);
-}