/* Find a variable's value in memory, for GDB, the GNU debugger.
- Copyright 1986, 87, 89, 91, 94, 95, 96, 1998
- Free Software Foundation, Inc.
+
+ Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994,
+ 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2003 Free Software
+ Foundation, Inc.
This file is part of GDB.
#include "inferior.h"
#include "target.h"
#include "gdb_string.h"
+#include "gdb_assert.h"
#include "floatformat.h"
#include "symfile.h" /* for overlay functions */
-
-/* This is used to indicate that we don't know the format of the floating point
- number. Typically, this is useful for native ports, where the actual format
- is irrelevant, since no conversions will be taking place. */
-
-const struct floatformat floatformat_unknown;
-
-/* Registers we shouldn't try to store. */
-#if !defined (CANNOT_STORE_REGISTER)
-#define CANNOT_STORE_REGISTER(regno) 0
-#endif
-
-static void write_register_gen PARAMS ((int, char *));
-
-static int read_relative_register_raw_bytes_for_frame PARAMS ((int regnum, char *myaddr, struct frame_info * frame));
+#include "regcache.h"
+#include "user-regs.h"
+#include "block.h"
/* Basic byte-swapping routines. GDB has needed these for a long time...
All extract a target-format integer at ADDR which is LEN bytes long. */
you lose
#endif
- LONGEST
-extract_signed_integer (addr, len)
- PTR addr;
- int len;
+LONGEST
+extract_signed_integer (const void *addr, int len)
{
LONGEST retval;
- unsigned char *p;
- unsigned char *startaddr = (unsigned char *) addr;
- unsigned char *endaddr = startaddr + len;
+ const unsigned char *p;
+ const unsigned char *startaddr = addr;
+ const unsigned char *endaddr = startaddr + len;
if (len > (int) sizeof (LONGEST))
error ("\
That operation is not available on integers of more than %d bytes.",
- sizeof (LONGEST));
+ (int) sizeof (LONGEST));
/* Start at the most significant end of the integer, and work towards
the least significant. */
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
p = startaddr;
/* Do the sign extension once at the start. */
}
ULONGEST
-extract_unsigned_integer (addr, len)
- PTR addr;
- int len;
+extract_unsigned_integer (const void *addr, int len)
{
ULONGEST retval;
- unsigned char *p;
- unsigned char *startaddr = (unsigned char *) addr;
- unsigned char *endaddr = startaddr + len;
+ const unsigned char *p;
+ const unsigned char *startaddr = addr;
+ const unsigned char *endaddr = startaddr + len;
if (len > (int) sizeof (ULONGEST))
error ("\
That operation is not available on integers of more than %d bytes.",
- sizeof (ULONGEST));
+ (int) sizeof (ULONGEST));
/* Start at the most significant end of the integer, and work towards
the least significant. */
retval = 0;
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
for (p = startaddr; p < endaddr; ++p)
retval = (retval << 8) | *p;
function returns 1 and sets *PVAL. Otherwise it returns 0. */
int
-extract_long_unsigned_integer (addr, orig_len, pval)
- PTR addr;
- int orig_len;
- LONGEST *pval;
+extract_long_unsigned_integer (const void *addr, int orig_len, LONGEST *pval)
{
char *p, *first_addr;
int len;
len = orig_len;
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
for (p = (char *) addr;
len > (int) sizeof (LONGEST) && p < (char *) addr + orig_len;
return 0;
}
+
+/* Treat the bytes at BUF as a pointer of type TYPE, and return the
+ address it represents. */
CORE_ADDR
-extract_address (addr, len)
- PTR addr;
- int len;
+extract_typed_address (const void *buf, struct type *type)
{
- /* Assume a CORE_ADDR can fit in a LONGEST (for now). Not sure
- whether we want this to be true eventually. */
- return (CORE_ADDR) extract_unsigned_integer (addr, len);
+ if (TYPE_CODE (type) != TYPE_CODE_PTR
+ && TYPE_CODE (type) != TYPE_CODE_REF)
+ internal_error (__FILE__, __LINE__,
+ "extract_typed_address: "
+ "type is not a pointer or reference");
+
+ return POINTER_TO_ADDRESS (type, buf);
}
+
void
-store_signed_integer (addr, len, val)
- PTR addr;
- int len;
- LONGEST val;
+store_signed_integer (void *addr, int len, LONGEST val)
{
unsigned char *p;
unsigned char *startaddr = (unsigned char *) addr;
/* Start at the least significant end of the integer, and work towards
the most significant. */
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
for (p = endaddr - 1; p >= startaddr; --p)
{
}
void
-store_unsigned_integer (addr, len, val)
- PTR addr;
- int len;
- ULONGEST val;
+store_unsigned_integer (void *addr, int len, ULONGEST val)
{
unsigned char *p;
unsigned char *startaddr = (unsigned char *) addr;
/* Start at the least significant end of the integer, and work towards
the most significant. */
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
for (p = endaddr - 1; p >= startaddr; --p)
{
}
}
-/* Store the literal address "val" into
- gdb-local memory pointed to by "addr"
- for "len" bytes. */
+/* Store the address ADDR as a pointer of type TYPE at BUF, in target
+ form. */
void
-store_address (addr, len, val)
- PTR addr;
- int len;
- LONGEST val;
+store_typed_address (void *buf, struct type *type, CORE_ADDR addr)
{
- store_unsigned_integer (addr, len, val);
-}
-\f
-/* Extract a floating-point number from a target-order byte-stream at ADDR.
- Returns the value as type DOUBLEST.
-
- If the host and target formats agree, we just copy the raw data into the
- appropriate type of variable and return, letting the host increase precision
- as necessary. Otherwise, we call the conversion routine and let it do the
- dirty work. */
-
-DOUBLEST
-extract_floating (void *addr, int len)
-{
- DOUBLEST dretval;
-
- if (len * TARGET_CHAR_BIT == TARGET_FLOAT_BIT)
- {
- if (HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT)
- {
- float retval;
-
- memcpy (&retval, addr, sizeof (retval));
- return retval;
- }
- else
- floatformat_to_doublest (TARGET_FLOAT_FORMAT, addr, &dretval);
- }
- else if (len * TARGET_CHAR_BIT == TARGET_DOUBLE_BIT)
- {
- if (HOST_DOUBLE_FORMAT == TARGET_DOUBLE_FORMAT)
- {
- double retval;
-
- memcpy (&retval, addr, sizeof (retval));
- return retval;
- }
- else
- floatformat_to_doublest (TARGET_DOUBLE_FORMAT, addr, &dretval);
- }
- else if (len * TARGET_CHAR_BIT == TARGET_LONG_DOUBLE_BIT)
- {
- if (HOST_LONG_DOUBLE_FORMAT == TARGET_LONG_DOUBLE_FORMAT)
- {
- DOUBLEST retval;
-
- memcpy (&retval, addr, sizeof (retval));
- return retval;
- }
- else
- floatformat_to_doublest (TARGET_LONG_DOUBLE_FORMAT, addr, &dretval);
- }
-#ifdef TARGET_EXTRACT_FLOATING
- else if (TARGET_EXTRACT_FLOATING (addr, len, &dretval))
- return dretval;
-#endif
- else
- {
- error ("Can't deal with a floating point number of %d bytes.", len);
- }
+ if (TYPE_CODE (type) != TYPE_CODE_PTR
+ && TYPE_CODE (type) != TYPE_CODE_REF)
+ internal_error (__FILE__, __LINE__,
+ "store_typed_address: "
+ "type is not a pointer or reference");
- return dretval;
+ ADDRESS_TO_POINTER (type, buf, addr);
}
-void
-store_floating (void *addr, int len, DOUBLEST val)
-{
- if (len * TARGET_CHAR_BIT == TARGET_FLOAT_BIT)
- {
- if (HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT)
- {
- float floatval = val;
- memcpy (addr, &floatval, sizeof (floatval));
- }
- else
- floatformat_from_doublest (TARGET_FLOAT_FORMAT, &val, addr);
- }
- else if (len * TARGET_CHAR_BIT == TARGET_DOUBLE_BIT)
- {
- if (HOST_DOUBLE_FORMAT == TARGET_DOUBLE_FORMAT)
- {
- double doubleval = val;
- memcpy (addr, &doubleval, sizeof (doubleval));
- }
- else
- floatformat_from_doublest (TARGET_DOUBLE_FORMAT, &val, addr);
- }
- else if (len * TARGET_CHAR_BIT == TARGET_LONG_DOUBLE_BIT)
- {
- if (HOST_LONG_DOUBLE_FORMAT == TARGET_LONG_DOUBLE_FORMAT)
- memcpy (addr, &val, sizeof (val));
- else
- floatformat_from_doublest (TARGET_LONG_DOUBLE_FORMAT, &val, addr);
- }
-#ifdef TARGET_STORE_FLOATING
- else if (TARGET_STORE_FLOATING (addr, len, val))
- return;
-#endif
- else
- {
- error ("Can't deal with a floating point number of %d bytes.", len);
- }
-}
-\f
+/* Return a `value' with the contents of (virtual or cooked) register
+ REGNUM as found in the specified FRAME. The register's type is
+ determined by register_type().
-/* Return the address in which frame FRAME's value of register REGNUM
- has been saved in memory. Or return zero if it has not been saved.
- If REGNUM specifies the SP, the value we return is actually
- the SP value, not an address where it was saved. */
+ NOTE: returns NULL if register value is not available. Caller will
+ check return value or die! */
-CORE_ADDR
-find_saved_register (frame, regnum)
- struct frame_info *frame;
- int regnum;
-{
- register struct frame_info *frame1 = NULL;
- register CORE_ADDR addr = 0;
-
- if (frame == NULL) /* No regs saved if want current frame */
- return 0;
-
-#ifdef HAVE_REGISTER_WINDOWS
- /* We assume that a register in a register window will only be saved
- in one place (since the name changes and/or disappears as you go
- towards inner frames), so we only call get_frame_saved_regs on
- the current frame. This is directly in contradiction to the
- usage below, which assumes that registers used in a frame must be
- saved in a lower (more interior) frame. This change is a result
- of working on a register window machine; get_frame_saved_regs
- always returns the registers saved within a frame, within the
- context (register namespace) of that frame. */
-
- /* However, note that we don't want this to return anything if
- nothing is saved (if there's a frame inside of this one). Also,
- callers to this routine asking for the stack pointer want the
- stack pointer saved for *this* frame; this is returned from the
- next frame. */
-
- if (REGISTER_IN_WINDOW_P (regnum))
- {
- frame1 = get_next_frame (frame);
- if (!frame1)
- return 0; /* Registers of this frame are active. */
-
- /* Get the SP from the next frame in; it will be this
- current frame. */
- if (regnum != SP_REGNUM)
- frame1 = frame;
-
- FRAME_INIT_SAVED_REGS (frame1);
- return frame1->saved_regs[regnum]; /* ... which might be zero */
- }
-#endif /* HAVE_REGISTER_WINDOWS */
-
- /* Note that this next routine assumes that registers used in
- frame x will be saved only in the frame that x calls and
- frames interior to it. This is not true on the sparc, but the
- above macro takes care of it, so we should be all right. */
- while (1)
- {
- QUIT;
- frame1 = get_prev_frame (frame1);
- if (frame1 == 0 || frame1 == frame)
- break;
- FRAME_INIT_SAVED_REGS (frame1);
- if (frame1->saved_regs[regnum])
- addr = frame1->saved_regs[regnum];
- }
-
- return addr;
-}
-
-/* Find register number REGNUM relative to FRAME and put its (raw,
- target format) contents in *RAW_BUFFER. Set *OPTIMIZED if the
- variable was optimized out (and thus can't be fetched). Set *LVAL
- to lval_memory, lval_register, or not_lval, depending on whether
- the value was fetched from memory, from a register, or in a strange
- and non-modifiable way (e.g. a frame pointer which was calculated
- rather than fetched). Set *ADDRP to the address, either in memory
- on as a REGISTER_BYTE offset into the registers array.
-
- Note that this implementation never sets *LVAL to not_lval. But
- it can be replaced by defining GET_SAVED_REGISTER and supplying
- your own.
-
- The argument RAW_BUFFER must point to aligned memory. */
-
-void
-default_get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
- char *raw_buffer;
- int *optimized;
- CORE_ADDR *addrp;
- struct frame_info *frame;
- int regnum;
- enum lval_type *lval;
+struct value *
+value_of_register (int regnum, struct frame_info *frame)
{
CORE_ADDR addr;
-
- if (!target_has_registers)
- error ("No registers.");
-
- /* Normal systems don't optimize out things with register numbers. */
- if (optimized != NULL)
- *optimized = 0;
- addr = find_saved_register (frame, regnum);
- if (addr != 0)
- {
- if (lval != NULL)
- *lval = lval_memory;
- if (regnum == SP_REGNUM)
- {
- if (raw_buffer != NULL)
- {
- /* Put it back in target format. */
- store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), (LONGEST) addr);
- }
- if (addrp != NULL)
- *addrp = 0;
- return;
- }
- if (raw_buffer != NULL)
- read_memory (addr, raw_buffer, REGISTER_RAW_SIZE (regnum));
- }
- else
- {
- if (lval != NULL)
- *lval = lval_register;
- addr = REGISTER_BYTE (regnum);
- if (raw_buffer != NULL)
- read_register_gen (regnum, raw_buffer);
- }
- if (addrp != NULL)
- *addrp = addr;
-}
-
-#if !defined (GET_SAVED_REGISTER)
-#define GET_SAVED_REGISTER(raw_buffer, optimized, addrp, frame, regnum, lval) \
- default_get_saved_register(raw_buffer, optimized, addrp, frame, regnum, lval)
-#endif
-void
-get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
- char *raw_buffer;
- int *optimized;
- CORE_ADDR *addrp;
- struct frame_info *frame;
- int regnum;
- enum lval_type *lval;
-{
- GET_SAVED_REGISTER (raw_buffer, optimized, addrp, frame, regnum, lval);
-}
-
-/* Copy the bytes of register REGNUM, relative to the input stack frame,
- into our memory at MYADDR, in target byte order.
- The number of bytes copied is REGISTER_RAW_SIZE (REGNUM).
-
- Returns 1 if could not be read, 0 if could. */
-
-static int
-read_relative_register_raw_bytes_for_frame (regnum, myaddr, frame)
- int regnum;
- char *myaddr;
- struct frame_info *frame;
-{
int optim;
- if (regnum == FP_REGNUM && frame)
- {
- /* Put it back in target format. */
- store_address (myaddr, REGISTER_RAW_SIZE (FP_REGNUM),
- (LONGEST) FRAME_FP (frame));
-
- return 0;
- }
-
- get_saved_register (myaddr, &optim, (CORE_ADDR *) NULL, frame,
- regnum, (enum lval_type *) NULL);
-
- if (register_valid[regnum] < 0)
- return 1; /* register value not available */
-
- return optim;
-}
-
-/* Copy the bytes of register REGNUM, relative to the current stack frame,
- into our memory at MYADDR, in target byte order.
- The number of bytes copied is REGISTER_RAW_SIZE (REGNUM).
-
- Returns 1 if could not be read, 0 if could. */
-
-int
-read_relative_register_raw_bytes (regnum, myaddr)
- int regnum;
- char *myaddr;
-{
- return read_relative_register_raw_bytes_for_frame (regnum, myaddr,
- selected_frame);
-}
+ struct value *reg_val;
+ int realnum;
+ char raw_buffer[MAX_REGISTER_SIZE];
+ enum lval_type lval;
-/* Return a `value' with the contents of register REGNUM
- in its virtual format, with the type specified by
- REGISTER_VIRTUAL_TYPE.
+ /* User registers lie completly outside of the range of normal
+ registers. Catch them early so that the target never sees them. */
+ if (regnum >= NUM_REGS + NUM_PSEUDO_REGS)
+ return value_of_user_reg (regnum, frame);
- NOTE: returns NULL if register value is not available.
- Caller will check return value or die! */
+ frame_register (frame, regnum, &optim, &lval, &addr, &realnum, raw_buffer);
-value_ptr
-value_of_register (regnum)
- int regnum;
-{
- CORE_ADDR addr;
- int optim;
- register value_ptr reg_val;
- char raw_buffer[MAX_REGISTER_RAW_SIZE];
- enum lval_type lval;
+ /* FIXME: cagney/2002-05-15: This test is just bogus.
- get_saved_register (raw_buffer, &optim, &addr,
- selected_frame, regnum, &lval);
+ It indicates that the target failed to supply a value for a
+ register because it was "not available" at this time. Problem
+ is, the target still has the register and so get saved_register()
+ may be returning a value saved on the stack. */
- if (register_valid[regnum] < 0)
+ if (register_cached (regnum) < 0)
return NULL; /* register value not available */
- reg_val = allocate_value (REGISTER_VIRTUAL_TYPE (regnum));
+ reg_val = allocate_value (register_type (current_gdbarch, regnum));
/* Convert raw data to virtual format if necessary. */
- if (REGISTER_CONVERTIBLE (regnum))
+ if (DEPRECATED_REGISTER_CONVERTIBLE (regnum))
{
- REGISTER_CONVERT_TO_VIRTUAL (regnum, REGISTER_VIRTUAL_TYPE (regnum),
- raw_buffer, VALUE_CONTENTS_RAW (reg_val));
+ DEPRECATED_REGISTER_CONVERT_TO_VIRTUAL (regnum, register_type (current_gdbarch, regnum),
+ raw_buffer, VALUE_CONTENTS_RAW (reg_val));
}
- else if (REGISTER_RAW_SIZE (regnum) == REGISTER_VIRTUAL_SIZE (regnum))
+ else if (REGISTER_RAW_SIZE (regnum) == DEPRECATED_REGISTER_VIRTUAL_SIZE (regnum))
memcpy (VALUE_CONTENTS_RAW (reg_val), raw_buffer,
REGISTER_RAW_SIZE (regnum));
else
- internal_error ("Register \"%s\" (%d) has conflicting raw (%d) and virtual (%d) size",
+ internal_error (__FILE__, __LINE__,
+ "Register \"%s\" (%d) has conflicting raw (%d) and virtual (%d) size",
REGISTER_NAME (regnum),
regnum,
REGISTER_RAW_SIZE (regnum),
- REGISTER_VIRTUAL_SIZE (regnum));
+ DEPRECATED_REGISTER_VIRTUAL_SIZE (regnum));
VALUE_LVAL (reg_val) = lval;
VALUE_ADDRESS (reg_val) = addr;
VALUE_REGNO (reg_val) = regnum;
VALUE_OPTIMIZED_OUT (reg_val) = optim;
return reg_val;
}
-\f
-/* Low level examining and depositing of registers.
-
- The caller is responsible for making
- sure that the inferior is stopped before calling the fetching routines,
- or it will get garbage. (a change from GDB version 3, in which
- the caller got the value from the last stop). */
-
-/* Contents and state of the registers (in target byte order). */
-
-char *registers;
-
-/* VALID_REGISTER is non-zero if it has been fetched, -1 if the
- register value was not available. */
-
-signed char *register_valid;
-
-/* The thread/process associated with the current set of registers. For now,
- -1 is special, and means `no current process'. */
-int registers_pid = -1;
-
-/* Indicate that registers may have changed, so invalidate the cache. */
-
-void
-registers_changed ()
-{
- int i;
- int numregs = ARCH_NUM_REGS;
-
- registers_pid = -1;
-
- /* Force cleanup of any alloca areas if using C alloca instead of
- a builtin alloca. This particular call is used to clean up
- areas allocated by low level target code which may build up
- during lengthy interactions between gdb and the target before
- gdb gives control to the user (ie watchpoints). */
- alloca (0);
-
- for (i = 0; i < numregs; i++)
- register_valid[i] = 0;
-
- if (registers_changed_hook)
- registers_changed_hook ();
-}
-
-/* Indicate that all registers have been fetched, so mark them all valid. */
-void
-registers_fetched ()
-{
- int i;
- int numregs = ARCH_NUM_REGS;
- for (i = 0; i < numregs; i++)
- register_valid[i] = 1;
-}
-
-/* read_register_bytes and write_register_bytes are generally a *BAD*
- idea. They are inefficient because they need to check for partial
- updates, which can only be done by scanning through all of the
- registers and seeing if the bytes that are being read/written fall
- inside of an invalid register. [The main reason this is necessary
- is that register sizes can vary, so a simple index won't suffice.]
- It is far better to call read_register_gen and write_register_gen
- if you want to get at the raw register contents, as it only takes a
- regno as an argument, and therefore can't do a partial register
- update.
-
- Prior to the recent fixes to check for partial updates, both read
- and write_register_bytes always checked to see if any registers
- were stale, and then called target_fetch_registers (-1) to update
- the whole set. This caused really slowed things down for remote
- targets. */
-
-/* Copy INLEN bytes of consecutive data from registers
- starting with the INREGBYTE'th byte of register data
- into memory at MYADDR. */
-
-void
-read_register_bytes (inregbyte, myaddr, inlen)
- int inregbyte;
- char *myaddr;
- int inlen;
-{
- int inregend = inregbyte + inlen;
- int regno;
-
- if (registers_pid != inferior_pid)
- {
- registers_changed ();
- registers_pid = inferior_pid;
- }
-
- /* See if we are trying to read bytes from out-of-date registers. If so,
- update just those registers. */
-
- for (regno = 0; regno < NUM_REGS; regno++)
- {
- int regstart, regend;
-
- if (register_valid[regno])
- continue;
-
- if (REGISTER_NAME (regno) == NULL || *REGISTER_NAME (regno) == '\0')
- continue;
-
- regstart = REGISTER_BYTE (regno);
- regend = regstart + REGISTER_RAW_SIZE (regno);
-
- if (regend <= inregbyte || inregend <= regstart)
- /* The range the user wants to read doesn't overlap with regno. */
- continue;
-
- /* We've found an invalid register where at least one byte will be read.
- Update it from the target. */
- target_fetch_registers (regno);
-
- if (!register_valid[regno])
- error ("read_register_bytes: Couldn't update register %d.", regno);
- }
-
- if (myaddr != NULL)
- memcpy (myaddr, ®isters[inregbyte], inlen);
-}
-
-/* Read register REGNO into memory at MYADDR, which must be large enough
- for REGISTER_RAW_BYTES (REGNO). Target byte-order.
- If the register is known to be the size of a CORE_ADDR or smaller,
- read_register can be used instead. */
-void
-read_register_gen (regno, myaddr)
- int regno;
- char *myaddr;
-{
- if (registers_pid != inferior_pid)
- {
- registers_changed ();
- registers_pid = inferior_pid;
- }
-
- if (!register_valid[regno])
- target_fetch_registers (regno);
- memcpy (myaddr, ®isters[REGISTER_BYTE (regno)],
- REGISTER_RAW_SIZE (regno));
-}
-
-/* Write register REGNO at MYADDR to the target. MYADDR points at
- REGISTER_RAW_BYTES(REGNO), which must be in target byte-order. */
-
-static void
-write_register_gen (regno, myaddr)
- int regno;
- char *myaddr;
-{
- int size;
-
- /* On the sparc, writing %g0 is a no-op, so we don't even want to change
- the registers array if something writes to this register. */
- if (CANNOT_STORE_REGISTER (regno))
- return;
-
- if (registers_pid != inferior_pid)
- {
- registers_changed ();
- registers_pid = inferior_pid;
- }
-
- size = REGISTER_RAW_SIZE (regno);
-
- /* If we have a valid copy of the register, and new value == old value,
- then don't bother doing the actual store. */
-
- if (register_valid[regno]
- && memcmp (®isters[REGISTER_BYTE (regno)], myaddr, size) == 0)
- return;
-
- target_prepare_to_store ();
-
- memcpy (®isters[REGISTER_BYTE (regno)], myaddr, size);
-
- register_valid[regno] = 1;
-
- target_store_registers (regno);
-}
-
-/* Copy INLEN bytes of consecutive data from memory at MYADDR
- into registers starting with the MYREGSTART'th byte of register data. */
-
-void
-write_register_bytes (myregstart, myaddr, inlen)
- int myregstart;
- char *myaddr;
- int inlen;
-{
- int myregend = myregstart + inlen;
- int regno;
-
- target_prepare_to_store ();
-
- /* Scan through the registers updating any that are covered by the range
- myregstart<=>myregend using write_register_gen, which does nice things
- like handling threads, and avoiding updates when the new and old contents
- are the same. */
-
- for (regno = 0; regno < NUM_REGS; regno++)
- {
- int regstart, regend;
-
- regstart = REGISTER_BYTE (regno);
- regend = regstart + REGISTER_RAW_SIZE (regno);
-
- /* Is this register completely outside the range the user is writing? */
- if (myregend <= regstart || regend <= myregstart)
- /* do nothing */ ;
-
- /* Is this register completely within the range the user is writing? */
- else if (myregstart <= regstart && regend <= myregend)
- write_register_gen (regno, myaddr + (regstart - myregstart));
-
- /* The register partially overlaps the range being written. */
- else
- {
- char regbuf[MAX_REGISTER_RAW_SIZE];
- /* What's the overlap between this register's bytes and
- those the caller wants to write? */
- int overlapstart = max (regstart, myregstart);
- int overlapend = min (regend, myregend);
-
- /* We may be doing a partial update of an invalid register.
- Update it from the target before scribbling on it. */
- read_register_gen (regno, regbuf);
-
- memcpy (registers + overlapstart,
- myaddr + (overlapstart - myregstart),
- overlapend - overlapstart);
-
- target_store_registers (regno);
- }
- }
-}
-
-
-/* Return the raw contents of register REGNO, regarding it as an integer. */
-/* This probably should be returning LONGEST rather than CORE_ADDR. */
-
-CORE_ADDR
-read_register (regno)
- int regno;
-{
- if (registers_pid != inferior_pid)
- {
- registers_changed ();
- registers_pid = inferior_pid;
- }
-
- if (!register_valid[regno])
- target_fetch_registers (regno);
-
- return (CORE_ADDR) extract_address (®isters[REGISTER_BYTE (regno)],
- REGISTER_RAW_SIZE (regno));
-}
-
-CORE_ADDR
-read_register_pid (regno, pid)
- int regno, pid;
-{
- int save_pid;
- CORE_ADDR retval;
-
- if (pid == inferior_pid)
- return read_register (regno);
-
- save_pid = inferior_pid;
-
- inferior_pid = pid;
-
- retval = read_register (regno);
-
- inferior_pid = save_pid;
-
- return retval;
-}
-
-/* Store VALUE, into the raw contents of register number REGNO.
- This should probably write a LONGEST rather than a CORE_ADDR */
-
-void
-write_register (regno, val)
- int regno;
- LONGEST val;
-{
- PTR buf;
- int size;
-
- /* On the sparc, writing %g0 is a no-op, so we don't even want to change
- the registers array if something writes to this register. */
- if (CANNOT_STORE_REGISTER (regno))
- return;
-
- if (registers_pid != inferior_pid)
- {
- registers_changed ();
- registers_pid = inferior_pid;
- }
-
- size = REGISTER_RAW_SIZE (regno);
- buf = alloca (size);
- store_signed_integer (buf, size, (LONGEST) val);
-
- /* If we have a valid copy of the register, and new value == old value,
- then don't bother doing the actual store. */
-
- if (register_valid[regno]
- && memcmp (®isters[REGISTER_BYTE (regno)], buf, size) == 0)
- return;
-
- target_prepare_to_store ();
-
- memcpy (®isters[REGISTER_BYTE (regno)], buf, size);
-
- register_valid[regno] = 1;
-
- target_store_registers (regno);
-}
-
-void
-write_register_pid (regno, val, pid)
- int regno;
- CORE_ADDR val;
- int pid;
-{
- int save_pid;
-
- if (pid == inferior_pid)
- {
- write_register (regno, val);
- return;
- }
-
- save_pid = inferior_pid;
-
- inferior_pid = pid;
-
- write_register (regno, val);
-
- inferior_pid = save_pid;
-}
-
-/* Record that register REGNO contains VAL.
- This is used when the value is obtained from the inferior or core dump,
- so there is no need to store the value there.
-
- If VAL is a NULL pointer, then it's probably an unsupported register. We
- just set it's value to all zeros. We might want to record this fact, and
- report it to the users of read_register and friends.
- */
-
-void
-supply_register (regno, val)
- int regno;
- char *val;
-{
-#if 1
- if (registers_pid != inferior_pid)
- {
- registers_changed ();
- registers_pid = inferior_pid;
- }
-#endif
-
- register_valid[regno] = 1;
- if (val)
- memcpy (®isters[REGISTER_BYTE (regno)], val, REGISTER_RAW_SIZE (regno));
- else
- memset (®isters[REGISTER_BYTE (regno)], '\000', REGISTER_RAW_SIZE (regno));
-
- /* On some architectures, e.g. HPPA, there are a few stray bits in some
- registers, that the rest of the code would like to ignore. */
-#ifdef CLEAN_UP_REGISTER_VALUE
- CLEAN_UP_REGISTER_VALUE (regno, ®isters[REGISTER_BYTE (regno)]);
-#endif
-}
-
-
-/* This routine is getting awfully cluttered with #if's. It's probably
- time to turn this into READ_PC and define it in the tm.h file.
- Ditto for write_pc.
-
- 1999-06-08: The following were re-written so that it assumes the
- existance of a TARGET_READ_PC et.al. macro. A default generic
- version of that macro is made available where needed.
-
- Since the ``TARGET_READ_PC'' et.al. macro is going to be controlled
- by the multi-arch framework, it will eventually be possible to
- eliminate the intermediate read_pc_pid(). The client would call
- TARGET_READ_PC directly. (cagney). */
-
-#ifndef TARGET_READ_PC
-#define TARGET_READ_PC generic_target_read_pc
-#endif
+/* Given a pointer of type TYPE in target form in BUF, return the
+ address it represents. */
CORE_ADDR
-generic_target_read_pc (int pid)
+unsigned_pointer_to_address (struct type *type, const void *buf)
{
-#ifdef PC_REGNUM
- if (PC_REGNUM >= 0)
- {
- CORE_ADDR pc_val = ADDR_BITS_REMOVE ((CORE_ADDR) read_register_pid (PC_REGNUM, pid));
- return pc_val;
- }
-#endif
- internal_error ("generic_target_read_pc");
- return 0;
-}
-
-CORE_ADDR
-read_pc_pid (pid)
- int pid;
-{
- int saved_inferior_pid;
- CORE_ADDR pc_val;
-
- /* In case pid != inferior_pid. */
- saved_inferior_pid = inferior_pid;
- inferior_pid = pid;
-
- pc_val = TARGET_READ_PC (pid);
-
- inferior_pid = saved_inferior_pid;
- return pc_val;
+ return extract_unsigned_integer (buf, TYPE_LENGTH (type));
}
CORE_ADDR
-read_pc ()
+signed_pointer_to_address (struct type *type, const void *buf)
{
- return read_pc_pid (inferior_pid);
+ return extract_signed_integer (buf, TYPE_LENGTH (type));
}
-#ifndef TARGET_WRITE_PC
-#define TARGET_WRITE_PC generic_target_write_pc
-#endif
-
+/* Given an address, store it as a pointer of type TYPE in target
+ format in BUF. */
void
-generic_target_write_pc (pc, pid)
- CORE_ADDR pc;
- int pid;
+unsigned_address_to_pointer (struct type *type, void *buf, CORE_ADDR addr)
{
-#ifdef PC_REGNUM
- if (PC_REGNUM >= 0)
- write_register_pid (PC_REGNUM, pc, pid);
-#ifdef NPC_REGNUM
- if (NPC_REGNUM >= 0)
- write_register_pid (NPC_REGNUM, pc + 4, pid);
-#ifdef NNPC_REGNUM
- if (NNPC_REGNUM >= 0)
- write_register_pid (NNPC_REGNUM, pc + 8, pid);
-#endif
-#endif
-#else
- internal_error ("generic_target_write_pc");
-#endif
+ store_unsigned_integer (buf, TYPE_LENGTH (type), addr);
}
void
-write_pc_pid (pc, pid)
- CORE_ADDR pc;
- int pid;
+address_to_signed_pointer (struct type *type, void *buf, CORE_ADDR addr)
{
- int saved_inferior_pid;
-
- /* In case pid != inferior_pid. */
- saved_inferior_pid = inferior_pid;
- inferior_pid = pid;
-
- TARGET_WRITE_PC (pc, pid);
-
- inferior_pid = saved_inferior_pid;
-}
-
-void
-write_pc (pc)
- CORE_ADDR pc;
-{
- write_pc_pid (pc, inferior_pid);
-}
-
-/* Cope with strage ways of getting to the stack and frame pointers */
-
-#ifndef TARGET_READ_SP
-#define TARGET_READ_SP generic_target_read_sp
-#endif
-
-CORE_ADDR
-generic_target_read_sp ()
-{
-#ifdef SP_REGNUM
- if (SP_REGNUM >= 0)
- return read_register (SP_REGNUM);
-#endif
- internal_error ("generic_target_read_sp");
-}
-
-CORE_ADDR
-read_sp ()
-{
- return TARGET_READ_SP ();
-}
-
-#ifndef TARGET_WRITE_SP
-#define TARGET_WRITE_SP generic_target_write_sp
-#endif
-
-void
-generic_target_write_sp (val)
- CORE_ADDR val;
-{
-#ifdef SP_REGNUM
- if (SP_REGNUM >= 0)
- {
- write_register (SP_REGNUM, val);
- return;
- }
-#endif
- internal_error ("generic_target_write_sp");
-}
-
-void
-write_sp (val)
- CORE_ADDR val;
-{
- TARGET_WRITE_SP (val);
-}
-
-#ifndef TARGET_READ_FP
-#define TARGET_READ_FP generic_target_read_fp
-#endif
-
-CORE_ADDR
-generic_target_read_fp ()
-{
-#ifdef FP_REGNUM
- if (FP_REGNUM >= 0)
- return read_register (FP_REGNUM);
-#endif
- internal_error ("generic_target_read_fp");
-}
-
-CORE_ADDR
-read_fp ()
-{
- return TARGET_READ_FP ();
-}
-
-#ifndef TARGET_WRITE_FP
-#define TARGET_WRITE_FP generic_target_write_fp
-#endif
-
-void
-generic_target_write_fp (val)
- CORE_ADDR val;
-{
-#ifdef FP_REGNUM
- if (FP_REGNUM >= 0)
- {
- write_register (FP_REGNUM, val);
- return;
- }
-#endif
- internal_error ("generic_target_write_fp");
-}
-
-void
-write_fp (val)
- CORE_ADDR val;
-{
- TARGET_WRITE_FP (val);
+ store_signed_integer (buf, TYPE_LENGTH (type), addr);
}
\f
/* Will calling read_var_value or locate_var_value on SYM end
up caring what frame it is being evaluated relative to? SYM must
be non-NULL. */
int
-symbol_read_needs_frame (sym)
- struct symbol *sym;
+symbol_read_needs_frame (struct symbol *sym)
{
switch (SYMBOL_CLASS (sym))
{
/* All cases listed explicitly so that gcc -Wall will detect it if
we failed to consider one. */
+ case LOC_COMPUTED:
+ case LOC_COMPUTED_ARG:
+ {
+ struct location_funcs *symfuncs = SYMBOL_LOCATION_FUNCS (sym);
+ return (symfuncs->read_needs_frame) (sym);
+ }
+ break;
+
case LOC_REGISTER:
case LOC_ARG:
case LOC_REF_ARG:
case LOC_LOCAL_ARG:
case LOC_BASEREG:
case LOC_BASEREG_ARG:
- case LOC_THREAD_LOCAL_STATIC:
+ case LOC_HP_THREAD_LOCAL_STATIC:
return 1;
case LOC_UNDEF:
and a stack frame id, read the value of the variable
and return a (pointer to a) struct value containing the value.
If the variable cannot be found, return a zero pointer.
- If FRAME is NULL, use the selected_frame. */
+ If FRAME is NULL, use the deprecated_selected_frame. */
-value_ptr
-read_var_value (var, frame)
- register struct symbol *var;
- struct frame_info *frame;
+struct value *
+read_var_value (struct symbol *var, struct frame_info *frame)
{
- register value_ptr v;
+ struct value *v;
struct type *type = SYMBOL_TYPE (var);
CORE_ADDR addr;
- register int len;
+ int len;
v = allocate_value (type);
VALUE_LVAL (v) = lval_memory; /* The most likely possibility. */
len = TYPE_LENGTH (type);
+
+ /* FIXME drow/2003-09-06: this call to the selected frame should be
+ pushed upwards to the callers. */
if (frame == NULL)
- frame = selected_frame;
+ frame = deprecated_safe_get_selected_frame ();
switch (SYMBOL_CLASS (var))
{
case LOC_LABEL:
/* Put the constant back in target format. */
if (overlay_debugging)
- store_address (VALUE_CONTENTS_RAW (v), len,
- (LONGEST) symbol_overlayed_address (SYMBOL_VALUE_ADDRESS (var),
- SYMBOL_BFD_SECTION (var)));
+ {
+ CORE_ADDR addr
+ = symbol_overlayed_address (SYMBOL_VALUE_ADDRESS (var),
+ SYMBOL_BFD_SECTION (var));
+ store_typed_address (VALUE_CONTENTS_RAW (v), type, addr);
+ }
else
- store_address (VALUE_CONTENTS_RAW (v), len,
- (LONGEST) SYMBOL_VALUE_ADDRESS (var));
+ store_typed_address (VALUE_CONTENTS_RAW (v), type,
+ SYMBOL_VALUE_ADDRESS (var));
VALUE_LVAL (v) = not_lval;
return v;
break;
case LOC_INDIRECT:
- /* The import slot does not have a real address in it from the
- dynamic loader (dld.sl on HP-UX), if the target hasn't begun
- execution yet, so check for that. */
- if (!target_has_execution)
- error ("\
+ {
+ /* The import slot does not have a real address in it from the
+ dynamic loader (dld.sl on HP-UX), if the target hasn't
+ begun execution yet, so check for that. */
+ CORE_ADDR locaddr;
+ struct value *loc;
+ if (!target_has_execution)
+ error ("\
Attempt to access variable defined in different shared object or load module when\n\
addresses have not been bound by the dynamic loader. Try again when executable is running.");
- addr = SYMBOL_VALUE_ADDRESS (var);
- addr = read_memory_unsigned_integer
- (addr, TARGET_PTR_BIT / TARGET_CHAR_BIT);
- break;
+ locaddr = SYMBOL_VALUE_ADDRESS (var);
+ loc = value_at (lookup_pointer_type (type), locaddr, NULL);
+ addr = value_as_address (loc);
+ }
case LOC_ARG:
if (frame == NULL)
return 0;
- addr = FRAME_ARGS_ADDRESS (frame);
+ addr = get_frame_args_address (frame);
if (!addr)
return 0;
addr += SYMBOL_VALUE (var);
break;
case LOC_REF_ARG:
- if (frame == NULL)
- return 0;
- addr = FRAME_ARGS_ADDRESS (frame);
- if (!addr)
- return 0;
- addr += SYMBOL_VALUE (var);
- addr = read_memory_unsigned_integer
- (addr, TARGET_PTR_BIT / TARGET_CHAR_BIT);
- break;
+ {
+ struct value *ref;
+ CORE_ADDR argref;
+ if (frame == NULL)
+ return 0;
+ argref = get_frame_args_address (frame);
+ if (!argref)
+ return 0;
+ argref += SYMBOL_VALUE (var);
+ ref = value_at (lookup_pointer_type (type), argref, NULL);
+ addr = value_as_address (ref);
+ break;
+ }
case LOC_LOCAL:
case LOC_LOCAL_ARG:
if (frame == NULL)
return 0;
- addr = FRAME_LOCALS_ADDRESS (frame);
+ addr = get_frame_locals_address (frame);
addr += SYMBOL_VALUE (var);
break;
case LOC_BASEREG:
case LOC_BASEREG_ARG:
+ case LOC_HP_THREAD_LOCAL_STATIC:
{
- char buf[MAX_REGISTER_RAW_SIZE];
- get_saved_register (buf, NULL, NULL, frame, SYMBOL_BASEREG (var),
- NULL);
- addr = extract_address (buf, REGISTER_RAW_SIZE (SYMBOL_BASEREG (var)));
- addr += SYMBOL_VALUE (var);
- break;
- }
-
- case LOC_THREAD_LOCAL_STATIC:
- {
- char buf[MAX_REGISTER_RAW_SIZE];
+ struct value *regval;
- get_saved_register (buf, NULL, NULL, frame, SYMBOL_BASEREG (var),
- NULL);
- addr = extract_address (buf, REGISTER_RAW_SIZE (SYMBOL_BASEREG (var)));
+ regval = value_from_register (lookup_pointer_type (type),
+ SYMBOL_BASEREG (var), frame);
+ if (regval == NULL)
+ error ("Value of base register not available.");
+ addr = value_as_address (regval);
addr += SYMBOL_VALUE (var);
break;
}
{
struct block *b;
int regno = SYMBOL_VALUE (var);
- value_ptr regval;
+ struct value *regval;
if (frame == NULL)
return 0;
- b = get_frame_block (frame);
+ b = get_frame_block (frame, 0);
if (SYMBOL_CLASS (var) == LOC_REGPARM_ADDR)
{
if (regval == NULL)
error ("Value of register variable not available.");
- addr = value_as_pointer (regval);
+ addr = value_as_address (regval);
VALUE_LVAL (v) = lval_memory;
}
else
}
break;
+ case LOC_COMPUTED:
+ case LOC_COMPUTED_ARG:
+ {
+ struct location_funcs *funcs = SYMBOL_LOCATION_FUNCS (var);
+
+ if (frame == 0 && (funcs->read_needs_frame) (var))
+ return 0;
+ return (funcs->read_variable) (var, frame);
+
+ }
+ break;
+
case LOC_UNRESOLVED:
{
struct minimal_symbol *msym;
- msym = lookup_minimal_symbol (SYMBOL_NAME (var), NULL, NULL);
+ msym = lookup_minimal_symbol (DEPRECATED_SYMBOL_NAME (var), NULL, NULL);
if (msym == NULL)
return 0;
if (overlay_debugging)
}
/* Return a value of type TYPE, stored in register REGNUM, in frame
- FRAME.
+ FRAME.
NOTE: returns NULL if register value is not available.
Caller will check return value or die! */
-value_ptr
-value_from_register (type, regnum, frame)
- struct type *type;
- int regnum;
- struct frame_info *frame;
+struct value *
+value_from_register (struct type *type, int regnum, struct frame_info *frame)
{
- char raw_buffer[MAX_REGISTER_RAW_SIZE];
- CORE_ADDR addr;
- int optim;
- value_ptr v = allocate_value (type);
- char *value_bytes = 0;
- int value_bytes_copied = 0;
- int num_storage_locs;
- enum lval_type lval;
- int len;
-
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct value *v = allocate_value (type);
CHECK_TYPEDEF (type);
- len = TYPE_LENGTH (type);
-
- /* Pointers on D10V are really only 16 bits, but we lie to gdb elsewhere... */
- if (GDB_TARGET_IS_D10V && TYPE_CODE (type) == TYPE_CODE_PTR)
- len = 2;
-
- VALUE_REGNO (v) = regnum;
- num_storage_locs = (len > REGISTER_VIRTUAL_SIZE (regnum) ?
- ((len - 1) / REGISTER_RAW_SIZE (regnum)) + 1 :
- 1);
-
- if (num_storage_locs > 1
-#ifdef GDB_TARGET_IS_H8500
- || TYPE_CODE (type) == TYPE_CODE_PTR
-#endif
- )
+ if (CONVERT_REGISTER_P (regnum, type))
+ {
+ /* The ISA/ABI need to something weird when obtaining the
+ specified value from this register. It might need to
+ re-order non-adjacent, starting with REGNUM (see MIPS and
+ i386). It might need to convert the [float] register into
+ the corresponding [integer] type (see Alpha). The assumption
+ is that REGISTER_TO_VALUE populates the entire value
+ including the location. */
+ REGISTER_TO_VALUE (frame, regnum, type, VALUE_CONTENTS_RAW (v));
+ VALUE_LVAL (v) = lval_reg_frame_relative;
+ VALUE_FRAME_ID (v) = get_frame_id (frame);
+ VALUE_FRAME_REGNUM (v) = regnum;
+ }
+ else
{
- /* Value spread across multiple storage locations. */
-
int local_regnum;
int mem_stor = 0, reg_stor = 0;
int mem_tracking = 1;
CORE_ADDR last_addr = 0;
CORE_ADDR first_addr = 0;
-
- value_bytes = (char *) alloca (len + MAX_REGISTER_RAW_SIZE);
+ int first_realnum = regnum;
+ int len = TYPE_LENGTH (type);
+ int value_bytes_copied;
+ int optimized = 0;
+ char *value_bytes = (char *) alloca (len + MAX_REGISTER_SIZE);
/* Copy all of the data out, whereever it may be. */
-
-#ifdef GDB_TARGET_IS_H8500
-/* This piece of hideosity is required because the H8500 treats registers
- differently depending upon whether they are used as pointers or not. As a
- pointer, a register needs to have a page register tacked onto the front.
- An alternate way to do this would be to have gcc output different register
- numbers for the pointer & non-pointer form of the register. But, it
- doesn't, so we're stuck with this. */
-
- if (TYPE_CODE (type) == TYPE_CODE_PTR
- && len > 2)
+ for (local_regnum = regnum, value_bytes_copied = 0;
+ value_bytes_copied < len;
+ (value_bytes_copied += REGISTER_RAW_SIZE (local_regnum),
+ ++local_regnum))
{
- int page_regnum;
-
- switch (regnum)
+ int realnum;
+ int optim;
+ enum lval_type lval;
+ CORE_ADDR addr;
+ frame_register (frame, local_regnum, &optim, &lval, &addr,
+ &realnum, value_bytes + value_bytes_copied);
+ optimized += optim;
+ if (register_cached (local_regnum) == -1)
+ return NULL; /* register value not available */
+
+ if (regnum == local_regnum)
{
- case R0_REGNUM:
- case R1_REGNUM:
- case R2_REGNUM:
- case R3_REGNUM:
- page_regnum = SEG_D_REGNUM;
- break;
- case R4_REGNUM:
- case R5_REGNUM:
- page_regnum = SEG_E_REGNUM;
- break;
- case R6_REGNUM:
- case R7_REGNUM:
- page_regnum = SEG_T_REGNUM;
- break;
+ first_addr = addr;
+ first_realnum = realnum;
}
-
- value_bytes[0] = 0;
- get_saved_register (value_bytes + 1,
- &optim,
- &addr,
- frame,
- page_regnum,
- &lval);
-
- if (register_valid[page_regnum] == -1)
- return NULL; /* register value not available */
-
- if (lval == lval_register)
- reg_stor++;
- else
- mem_stor++;
- first_addr = addr;
- last_addr = addr;
-
- get_saved_register (value_bytes + 2,
- &optim,
- &addr,
- frame,
- regnum,
- &lval);
-
- if (register_valid[regnum] == -1)
- return NULL; /* register value not available */
-
if (lval == lval_register)
reg_stor++;
else
{
mem_stor++;
- mem_tracking = mem_tracking && (addr == last_addr);
+
+ mem_tracking = (mem_tracking
+ && (regnum == local_regnum
+ || addr == last_addr));
}
last_addr = addr;
}
- else
-#endif /* GDB_TARGET_IS_H8500 */
- for (local_regnum = regnum;
- value_bytes_copied < len;
- (value_bytes_copied += REGISTER_RAW_SIZE (local_regnum),
- ++local_regnum))
- {
- get_saved_register (value_bytes + value_bytes_copied,
- &optim,
- &addr,
- frame,
- local_regnum,
- &lval);
-
- if (register_valid[local_regnum] == -1)
- return NULL; /* register value not available */
-
- if (regnum == local_regnum)
- first_addr = addr;
- if (lval == lval_register)
- reg_stor++;
- else
- {
- mem_stor++;
-
- mem_tracking =
- (mem_tracking
- && (regnum == local_regnum
- || addr == last_addr));
- }
- last_addr = addr;
- }
-
+
+ /* FIXME: cagney/2003-06-04: Shouldn't this always use
+ lval_reg_frame_relative? If it doesn't and the register's
+ location changes (say after a resume) then this value is
+ going to have wrong information. */
if ((reg_stor && mem_stor)
|| (mem_stor && !mem_tracking))
/* Mixed storage; all of the hassle we just went through was
for some good purpose. */
{
VALUE_LVAL (v) = lval_reg_frame_relative;
- VALUE_FRAME (v) = FRAME_FP (frame);
+ VALUE_FRAME_ID (v) = get_frame_id (frame);
VALUE_FRAME_REGNUM (v) = regnum;
}
else if (mem_stor)
{
VALUE_LVAL (v) = lval_register;
VALUE_ADDRESS (v) = first_addr;
+ VALUE_REGNO (v) = first_realnum;
}
else
- internal_error ("value_from_register: Value not stored anywhere!");
-
- VALUE_OPTIMIZED_OUT (v) = optim;
-
+ internal_error (__FILE__, __LINE__,
+ "value_from_register: Value not stored anywhere!");
+
+ VALUE_OPTIMIZED_OUT (v) = optimized;
+
/* Any structure stored in more than one register will always be
- an integral number of registers. Otherwise, you'd need to do
+ an integral number of registers. Otherwise, you need to do
some fiddling with the last register copied here for little
endian machines. */
-
- /* Copy into the contents section of the value. */
- memcpy (VALUE_CONTENTS_RAW (v), value_bytes, len);
-
- /* Finally do any conversion necessary when extracting this
- type from more than one register. */
-#ifdef REGISTER_CONVERT_TO_TYPE
- REGISTER_CONVERT_TO_TYPE (regnum, type, VALUE_CONTENTS_RAW (v));
-#endif
- return v;
- }
-
- /* Data is completely contained within a single register. Locate the
- register's contents in a real register or in core;
- read the data in raw format. */
-
- get_saved_register (raw_buffer, &optim, &addr, frame, regnum, &lval);
-
- if (register_valid[regnum] == -1)
- return NULL; /* register value not available */
-
- VALUE_OPTIMIZED_OUT (v) = optim;
- VALUE_LVAL (v) = lval;
- VALUE_ADDRESS (v) = addr;
-
- /* Convert raw data to virtual format if necessary. */
-
- if (REGISTER_CONVERTIBLE (regnum))
- {
- REGISTER_CONVERT_TO_VIRTUAL (regnum, type,
- raw_buffer, VALUE_CONTENTS_RAW (v));
- }
- else
- {
- /* Raw and virtual formats are the same for this register. */
-
- if (TARGET_BYTE_ORDER == BIG_ENDIAN && len < REGISTER_RAW_SIZE (regnum))
- {
- /* Big-endian, and we want less than full size. */
- VALUE_OFFSET (v) = REGISTER_RAW_SIZE (regnum) - len;
- }
-
- memcpy (VALUE_CONTENTS_RAW (v), raw_buffer + VALUE_OFFSET (v), len);
- }
-
- if (GDB_TARGET_IS_D10V
- && TYPE_CODE (type) == TYPE_CODE_PTR
- && TYPE_TARGET_TYPE (type)
- && (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_FUNC))
- {
- /* pointer to function */
- unsigned long num;
- unsigned short snum;
- snum = (unsigned short) extract_unsigned_integer (VALUE_CONTENTS_RAW (v), 2);
- num = D10V_MAKE_IADDR (snum);
- store_address (VALUE_CONTENTS_RAW (v), 4, num);
- }
- else if (GDB_TARGET_IS_D10V
- && TYPE_CODE (type) == TYPE_CODE_PTR)
- {
- /* pointer to data */
- unsigned long num;
- unsigned short snum;
- snum = (unsigned short) extract_unsigned_integer (VALUE_CONTENTS_RAW (v), 2);
- num = D10V_MAKE_DADDR (snum);
- store_address (VALUE_CONTENTS_RAW (v), 4, num);
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
+ && len < REGISTER_RAW_SIZE (regnum))
+ /* Big-endian, and we want less than full size. */
+ VALUE_OFFSET (v) = REGISTER_RAW_SIZE (regnum) - len;
+ else
+ VALUE_OFFSET (v) = 0;
+ memcpy (VALUE_CONTENTS_RAW (v), value_bytes + VALUE_OFFSET (v), len);
}
-
return v;
}
+
\f
/* Given a struct symbol for a variable or function,
and a stack frame id,
return a (pointer to a) struct value containing the properly typed
address. */
-value_ptr
-locate_var_value (var, frame)
- register struct symbol *var;
- struct frame_info *frame;
+struct value *
+locate_var_value (struct symbol *var, struct frame_info *frame)
{
CORE_ADDR addr = 0;
struct type *type = SYMBOL_TYPE (var);
- value_ptr lazy_value;
+ struct value *lazy_value;
/* Evaluate it first; if the result is a memory address, we're fine.
Lazy evaluation pays off here. */
lazy_value = read_var_value (var, frame);
if (lazy_value == 0)
- error ("Address of \"%s\" is unknown.", SYMBOL_SOURCE_NAME (var));
+ error ("Address of \"%s\" is unknown.", SYMBOL_PRINT_NAME (var));
if (VALUE_LAZY (lazy_value)
|| TYPE_CODE (type) == TYPE_CODE_FUNC)
{
- value_ptr val;
+ struct value *val;
addr = VALUE_ADDRESS (lazy_value);
- val = value_from_longest (lookup_pointer_type (type), (LONGEST) addr);
+ val = value_from_pointer (lookup_pointer_type (type), addr);
VALUE_BFD_SECTION (val) = VALUE_BFD_SECTION (lazy_value);
return val;
}
switch (VALUE_LVAL (lazy_value))
{
case lval_register:
+ gdb_assert (REGISTER_NAME (VALUE_REGNO (lazy_value)) != NULL
+ && *REGISTER_NAME (VALUE_REGNO (lazy_value)) != '\0');
+ error("Address requested for identifier "
+ "\"%s\" which is in register $%s",
+ SYMBOL_PRINT_NAME (var),
+ REGISTER_NAME (VALUE_REGNO (lazy_value)));
+ break;
+
case lval_reg_frame_relative:
- error ("Address requested for identifier \"%s\" which is in a register.",
- SYMBOL_SOURCE_NAME (var));
+ gdb_assert (REGISTER_NAME (VALUE_FRAME_REGNUM (lazy_value)) != NULL
+ && *REGISTER_NAME (VALUE_FRAME_REGNUM (lazy_value)) != '\0');
+ error("Address requested for identifier "
+ "\"%s\" which is in frame register $%s",
+ SYMBOL_PRINT_NAME (var),
+ REGISTER_NAME (VALUE_FRAME_REGNUM (lazy_value)));
break;
default:
error ("Can't take address of \"%s\" which isn't an lvalue.",
- SYMBOL_SOURCE_NAME (var));
+ SYMBOL_PRINT_NAME (var));
break;
}
return 0; /* For lint -- never reached */
}
-\f
-
-static void build_findvar PARAMS ((void));
-static void
-build_findvar ()
-{
- /* We allocate some extra slop since we do a lot of memcpy's around
- `registers', and failing-soft is better than failing hard. */
- int sizeof_registers = REGISTER_BYTES + /* SLOP */ 256;
- int sizeof_register_valid = NUM_REGS * sizeof (*register_valid);
- registers = xmalloc (sizeof_registers);
- memset (registers, 0, sizeof_registers);
- register_valid = xmalloc (sizeof_register_valid);
- memset (register_valid, 0, sizeof_register_valid);
-}
-
-void _initialize_findvar PARAMS ((void));
-void
-_initialize_findvar ()
-{
- build_findvar ();
-
- register_gdbarch_swap (®isters, sizeof (registers), NULL);
- register_gdbarch_swap (®ister_valid, sizeof (register_valid), NULL);
- register_gdbarch_swap (NULL, 0, build_findvar);
-}