/* Find a variable's value in memory, for GDB, the GNU debugger.
- Copyright 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
+ Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1997, 1998, 1999, 2000, 2001
+ Free Software Foundation, Inc.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "symtab.h"
#include "gdbcore.h"
#include "inferior.h"
#include "target.h"
+#include "gdb_string.h"
+#include "floatformat.h"
+#include "symfile.h" /* for overlay functions */
+#include "regcache.h"
+
+/* This is used to indicate that we don't know the format of the floating point
+ number. Typically, this is useful for native ports, where the actual format
+ is irrelevant, since no conversions will be taking place. */
+
+const struct floatformat floatformat_unknown;
/* Basic byte-swapping routines. GDB has needed these for a long time...
All extract a target-format integer at ADDR which is LEN bytes long. */
assume it throughout all these swapping routines. If we had to deal with
9 bit characters, we would need to make len be in bits and would have
to re-write these routines... */
- you lose
+you lose
#endif
LONGEST
-extract_signed_integer (addr, len)
- PTR addr;
- int len;
+extract_signed_integer (void *addr, int len)
{
LONGEST retval;
unsigned char *p;
- unsigned char *startaddr = (unsigned char *)addr;
+ unsigned char *startaddr = (unsigned char *) addr;
unsigned char *endaddr = startaddr + len;
- if (len > sizeof (LONGEST))
+ if (len > (int) sizeof (LONGEST))
error ("\
That operation is not available on integers of more than %d bytes.",
sizeof (LONGEST));
/* Start at the most significant end of the integer, and work towards
the least significant. */
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
- p = startaddr;
-#else
- p = endaddr - 1;
-#endif
- /* Do the sign extension once at the start. */
- retval = ((LONGEST)*p ^ 0x80) - 0x80;
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
- for (++p; p < endaddr; ++p)
-#else
- for (--p; p >= startaddr; --p)
-#endif
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ {
+ p = startaddr;
+ /* Do the sign extension once at the start. */
+ retval = ((LONGEST) * p ^ 0x80) - 0x80;
+ for (++p; p < endaddr; ++p)
+ retval = (retval << 8) | *p;
+ }
+ else
{
- retval = (retval << 8) | *p;
+ p = endaddr - 1;
+ /* Do the sign extension once at the start. */
+ retval = ((LONGEST) * p ^ 0x80) - 0x80;
+ for (--p; p >= startaddr; --p)
+ retval = (retval << 8) | *p;
}
return retval;
}
-unsigned LONGEST
-extract_unsigned_integer (addr, len)
- PTR addr;
- int len;
+ULONGEST
+extract_unsigned_integer (void *addr, int len)
{
- unsigned LONGEST retval;
+ ULONGEST retval;
unsigned char *p;
- unsigned char *startaddr = (unsigned char *)addr;
+ unsigned char *startaddr = (unsigned char *) addr;
unsigned char *endaddr = startaddr + len;
- if (len > sizeof (unsigned LONGEST))
+ if (len > (int) sizeof (ULONGEST))
error ("\
That operation is not available on integers of more than %d bytes.",
- sizeof (unsigned LONGEST));
+ sizeof (ULONGEST));
/* Start at the most significant end of the integer, and work towards
the least significant. */
retval = 0;
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
- for (p = startaddr; p < endaddr; ++p)
-#else
- for (p = endaddr - 1; p >= startaddr; --p)
-#endif
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ {
+ for (p = startaddr; p < endaddr; ++p)
+ retval = (retval << 8) | *p;
+ }
+ else
{
- retval = (retval << 8) | *p;
+ for (p = endaddr - 1; p >= startaddr; --p)
+ retval = (retval << 8) | *p;
}
return retval;
}
-CORE_ADDR
-extract_address (addr, len)
- PTR addr;
- int len;
-{
- /* Assume a CORE_ADDR can fit in a LONGEST (for now). Not sure
- whether we want this to be true eventually. */
- return extract_unsigned_integer (addr, len);
-}
+/* Sometimes a long long unsigned integer can be extracted as a
+ LONGEST value. This is done so that we can print these values
+ better. If this integer can be converted to a LONGEST, this
+ function returns 1 and sets *PVAL. Otherwise it returns 0. */
-void
-store_signed_integer (addr, len, val)
- PTR addr;
- int len;
- LONGEST val;
+int
+extract_long_unsigned_integer (void *addr, int orig_len, LONGEST *pval)
{
- unsigned char *p;
- unsigned char *startaddr = (unsigned char *)addr;
- unsigned char *endaddr = startaddr + len;
+ char *p, *first_addr;
+ int len;
- /* Start at the least significant end of the integer, and work towards
- the most significant. */
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
- for (p = endaddr - 1; p >= startaddr; --p)
-#else
- for (p = startaddr; p < endaddr; ++p)
-#endif
+ len = orig_len;
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ {
+ for (p = (char *) addr;
+ len > (int) sizeof (LONGEST) && p < (char *) addr + orig_len;
+ p++)
+ {
+ if (*p == 0)
+ len--;
+ else
+ break;
+ }
+ first_addr = p;
+ }
+ else
{
- *p = val & 0xff;
- val >>= 8;
+ first_addr = (char *) addr;
+ for (p = (char *) addr + orig_len - 1;
+ len > (int) sizeof (LONGEST) && p >= (char *) addr;
+ p--)
+ {
+ if (*p == 0)
+ len--;
+ else
+ break;
+ }
}
-}
-
-void
-store_unsigned_integer (addr, len, val)
- PTR addr;
- int len;
- unsigned LONGEST val;
-{
- unsigned char *p;
- unsigned char *startaddr = (unsigned char *)addr;
- unsigned char *endaddr = startaddr + len;
- /* Start at the least significant end of the integer, and work towards
- the most significant. */
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
- for (p = endaddr - 1; p >= startaddr; --p)
-#else
- for (p = startaddr; p < endaddr; ++p)
-#endif
+ if (len <= (int) sizeof (LONGEST))
{
- *p = val & 0xff;
- val >>= 8;
+ *pval = (LONGEST) extract_unsigned_integer (first_addr,
+ sizeof (LONGEST));
+ return 1;
}
+
+ return 0;
}
-void
-store_address (addr, len, val)
- PTR addr;
- int len;
- CORE_ADDR val;
+
+/* Treat the LEN bytes at ADDR as a target-format address, and return
+ that address. ADDR is a buffer in the GDB process, not in the
+ inferior.
+
+ This function should only be used by target-specific code. It
+ assumes that a pointer has the same representation as that thing's
+ address represented as an integer. Some machines use word
+ addresses, or similarly munged things, for certain types of
+ pointers, so that assumption doesn't hold everywhere.
+
+ Common code should use extract_typed_address instead, or something
+ else based on POINTER_TO_ADDRESS. */
+
+CORE_ADDR
+extract_address (void *addr, int len)
{
/* Assume a CORE_ADDR can fit in a LONGEST (for now). Not sure
whether we want this to be true eventually. */
- store_unsigned_integer (addr, len, (LONGEST)val);
+ return (CORE_ADDR) extract_unsigned_integer (addr, len);
}
-\f
-#if !defined (GET_SAVED_REGISTER)
-/* Return the address in which frame FRAME's value of register REGNUM
- has been saved in memory. Or return zero if it has not been saved.
- If REGNUM specifies the SP, the value we return is actually
- the SP value, not an address where it was saved. */
+/* Treat the bytes at BUF as a pointer of type TYPE, and return the
+ address it represents. */
CORE_ADDR
-find_saved_register (frame, regnum)
- FRAME frame;
- int regnum;
+extract_typed_address (void *buf, struct type *type)
{
- struct frame_info *fi;
- struct frame_saved_regs saved_regs;
-
- register FRAME frame1 = 0;
- register CORE_ADDR addr = 0;
-
- if (frame == 0) /* No regs saved if want current frame */
- return 0;
-
-#ifdef HAVE_REGISTER_WINDOWS
- /* We assume that a register in a register window will only be saved
- in one place (since the name changes and/or disappears as you go
- towards inner frames), so we only call get_frame_saved_regs on
- the current frame. This is directly in contradiction to the
- usage below, which assumes that registers used in a frame must be
- saved in a lower (more interior) frame. This change is a result
- of working on a register window machine; get_frame_saved_regs
- always returns the registers saved within a frame, within the
- context (register namespace) of that frame. */
-
- /* However, note that we don't want this to return anything if
- nothing is saved (if there's a frame inside of this one). Also,
- callers to this routine asking for the stack pointer want the
- stack pointer saved for *this* frame; this is returned from the
- next frame. */
-
-
- if (REGISTER_IN_WINDOW_P(regnum))
- {
- frame1 = get_next_frame (frame);
- if (!frame1) return 0; /* Registers of this frame are
- active. */
-
- /* Get the SP from the next frame in; it will be this
- current frame. */
- if (regnum != SP_REGNUM)
- frame1 = frame;
-
- fi = get_frame_info (frame1);
- get_frame_saved_regs (fi, &saved_regs);
- return saved_regs.regs[regnum]; /* ... which might be zero */
- }
-#endif /* HAVE_REGISTER_WINDOWS */
+ if (TYPE_CODE (type) != TYPE_CODE_PTR
+ && TYPE_CODE (type) != TYPE_CODE_REF)
+ internal_error (__FILE__, __LINE__,
+ "extract_typed_address: "
+ "type is not a pointer or reference");
- /* Note that this next routine assumes that registers used in
- frame x will be saved only in the frame that x calls and
- frames interior to it. This is not true on the sparc, but the
- above macro takes care of it, so we should be all right. */
- while (1)
- {
- QUIT;
- frame1 = get_prev_frame (frame1);
- if (frame1 == 0 || frame1 == frame)
- break;
- fi = get_frame_info (frame1);
- get_frame_saved_regs (fi, &saved_regs);
- if (saved_regs.regs[regnum])
- addr = saved_regs.regs[regnum];
- }
-
- return addr;
+ return POINTER_TO_ADDRESS (type, buf);
}
-/* Find register number REGNUM relative to FRAME and put its (raw,
- target format) contents in *RAW_BUFFER. Set *OPTIMIZED if the
- variable was optimized out (and thus can't be fetched). Set *LVAL
- to lval_memory, lval_register, or not_lval, depending on whether
- the value was fetched from memory, from a register, or in a strange
- and non-modifiable way (e.g. a frame pointer which was calculated
- rather than fetched). Set *ADDRP to the address, either in memory
- on as a REGISTER_BYTE offset into the registers array.
- Note that this implementation never sets *LVAL to not_lval. But
- it can be replaced by defining GET_SAVED_REGISTER and supplying
- your own.
+void
+store_signed_integer (void *addr, int len, LONGEST val)
+{
+ unsigned char *p;
+ unsigned char *startaddr = (unsigned char *) addr;
+ unsigned char *endaddr = startaddr + len;
- The argument RAW_BUFFER must point to aligned memory. */
+ /* Start at the least significant end of the integer, and work towards
+ the most significant. */
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ {
+ for (p = endaddr - 1; p >= startaddr; --p)
+ {
+ *p = val & 0xff;
+ val >>= 8;
+ }
+ }
+ else
+ {
+ for (p = startaddr; p < endaddr; ++p)
+ {
+ *p = val & 0xff;
+ val >>= 8;
+ }
+ }
+}
void
-get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
- char *raw_buffer;
- int *optimized;
- CORE_ADDR *addrp;
- FRAME frame;
- int regnum;
- enum lval_type *lval;
+store_unsigned_integer (void *addr, int len, ULONGEST val)
{
- CORE_ADDR addr;
- /* Normal systems don't optimize out things with register numbers. */
- if (optimized != NULL)
- *optimized = 0;
- addr = find_saved_register (frame, regnum);
- if (addr != 0)
+ unsigned char *p;
+ unsigned char *startaddr = (unsigned char *) addr;
+ unsigned char *endaddr = startaddr + len;
+
+ /* Start at the least significant end of the integer, and work towards
+ the most significant. */
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
{
- if (lval != NULL)
- *lval = lval_memory;
- if (regnum == SP_REGNUM)
+ for (p = endaddr - 1; p >= startaddr; --p)
{
- if (raw_buffer != NULL)
- {
- /* Put it back in target format. */
- store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), addr);
- }
- if (addrp != NULL)
- *addrp = 0;
- return;
+ *p = val & 0xff;
+ val >>= 8;
}
- if (raw_buffer != NULL)
- read_memory (addr, raw_buffer, REGISTER_RAW_SIZE (regnum));
}
else
{
- if (lval != NULL)
- *lval = lval_register;
- addr = REGISTER_BYTE (regnum);
- if (raw_buffer != NULL)
- read_register_gen (regnum, raw_buffer);
+ for (p = startaddr; p < endaddr; ++p)
+ {
+ *p = val & 0xff;
+ val >>= 8;
+ }
}
- if (addrp != NULL)
- *addrp = addr;
}
-#endif /* GET_SAVED_REGISTER. */
-/* Copy the bytes of register REGNUM, relative to the current stack frame,
- into our memory at MYADDR, in target byte order.
- The number of bytes copied is REGISTER_RAW_SIZE (REGNUM).
+/* Store the address VAL as a LEN-byte value in target byte order at
+ ADDR. ADDR is a buffer in the GDB process, not in the inferior.
- Returns 1 if could not be read, 0 if could. */
+ This function should only be used by target-specific code. It
+ assumes that a pointer has the same representation as that thing's
+ address represented as an integer. Some machines use word
+ addresses, or similarly munged things, for certain types of
+ pointers, so that assumption doesn't hold everywhere.
-int
-read_relative_register_raw_bytes (regnum, myaddr)
- int regnum;
- char *myaddr;
+ Common code should use store_typed_address instead, or something else
+ based on ADDRESS_TO_POINTER. */
+void
+store_address (void *addr, int len, LONGEST val)
{
- int optim;
- if (regnum == FP_REGNUM && selected_frame)
- {
- /* Put it back in target format. */
- store_address (myaddr, REGISTER_RAW_SIZE(FP_REGNUM),
- FRAME_FP(selected_frame));
- return 0;
- }
+ store_unsigned_integer (addr, len, val);
+}
+
+
+/* Store the address ADDR as a pointer of type TYPE at BUF, in target
+ form. */
+void
+store_typed_address (void *buf, struct type *type, CORE_ADDR addr)
+{
+ if (TYPE_CODE (type) != TYPE_CODE_PTR
+ && TYPE_CODE (type) != TYPE_CODE_REF)
+ internal_error (__FILE__, __LINE__,
+ "store_typed_address: "
+ "type is not a pointer or reference");
- get_saved_register (myaddr, &optim, (CORE_ADDR *) NULL, selected_frame,
- regnum, (enum lval_type *)NULL);
- return optim;
+ ADDRESS_TO_POINTER (type, buf, addr);
}
+
+
/* Return a `value' with the contents of register REGNUM
in its virtual format, with the type specified by
- REGISTER_VIRTUAL_TYPE. */
+ REGISTER_VIRTUAL_TYPE.
+
+ NOTE: returns NULL if register value is not available.
+ Caller will check return value or die! */
-value
-value_of_register (regnum)
- int regnum;
+struct value *
+value_of_register (int regnum)
{
CORE_ADDR addr;
int optim;
- register value val;
- char raw_buffer[MAX_REGISTER_RAW_SIZE];
- char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
+ struct value *reg_val;
+ char *raw_buffer = (char*) alloca (MAX_REGISTER_RAW_SIZE);
enum lval_type lval;
get_saved_register (raw_buffer, &optim, &addr,
selected_frame, regnum, &lval);
- REGISTER_CONVERT_TO_VIRTUAL (regnum, raw_buffer, virtual_buffer);
- val = allocate_value (REGISTER_VIRTUAL_TYPE (regnum));
- memcpy (VALUE_CONTENTS_RAW (val), virtual_buffer,
- REGISTER_VIRTUAL_SIZE (regnum));
- VALUE_LVAL (val) = lval;
- VALUE_ADDRESS (val) = addr;
- VALUE_REGNO (val) = regnum;
- VALUE_OPTIMIZED_OUT (val) = optim;
- return val;
-}
-\f
-/* Low level examining and depositing of registers.
-
- The caller is responsible for making
- sure that the inferior is stopped before calling the fetching routines,
- or it will get garbage. (a change from GDB version 3, in which
- the caller got the value from the last stop). */
+ if (register_cached (regnum) < 0)
+ return NULL; /* register value not available */
-/* Contents of the registers in target byte order.
- We allocate some extra slop since we do a lot of memcpy's around `registers',
- and failing-soft is better than failing hard. */
-char registers[REGISTER_BYTES + /* SLOP */ 256];
+ reg_val = allocate_value (REGISTER_VIRTUAL_TYPE (regnum));
-/* Nonzero if that register has been fetched. */
-char register_valid[NUM_REGS];
+ /* Convert raw data to virtual format if necessary. */
-/* Indicate that registers may have changed, so invalidate the cache. */
-void
-registers_changed ()
-{
- int i;
- for (i = 0; i < NUM_REGS; i++)
- register_valid[i] = 0;
-}
-
-/* Indicate that all registers have been fetched, so mark them all valid. */
-void
-registers_fetched ()
-{
- int i;
- for (i = 0; i < NUM_REGS; i++)
- register_valid[i] = 1;
-}
-
-/* Copy LEN bytes of consecutive data from registers
- starting with the REGBYTE'th byte of register data
- into memory at MYADDR. */
-
-void
-read_register_bytes (regbyte, myaddr, len)
- int regbyte;
- char *myaddr;
- int len;
-{
- /* Fetch all registers. */
- int i;
- for (i = 0; i < NUM_REGS; i++)
- if (!register_valid[i])
- {
- target_fetch_registers (-1);
- break;
- }
- if (myaddr != NULL)
- memcpy (myaddr, ®isters[regbyte], len);
-}
-
-/* Read register REGNO into memory at MYADDR, which must be large enough
- for REGISTER_RAW_BYTES (REGNO). Target byte-order.
- If the register is known to be the size of a CORE_ADDR or smaller,
- read_register can be used instead. */
-void
-read_register_gen (regno, myaddr)
- int regno;
- char *myaddr;
-{
- if (!register_valid[regno])
- target_fetch_registers (regno);
- memcpy (myaddr, ®isters[REGISTER_BYTE (regno)],
- REGISTER_RAW_SIZE (regno));
+ if (REGISTER_CONVERTIBLE (regnum))
+ {
+ REGISTER_CONVERT_TO_VIRTUAL (regnum, REGISTER_VIRTUAL_TYPE (regnum),
+ raw_buffer, VALUE_CONTENTS_RAW (reg_val));
+ }
+ else if (REGISTER_RAW_SIZE (regnum) == REGISTER_VIRTUAL_SIZE (regnum))
+ memcpy (VALUE_CONTENTS_RAW (reg_val), raw_buffer,
+ REGISTER_RAW_SIZE (regnum));
+ else
+ internal_error (__FILE__, __LINE__,
+ "Register \"%s\" (%d) has conflicting raw (%d) and virtual (%d) size",
+ REGISTER_NAME (regnum),
+ regnum,
+ REGISTER_RAW_SIZE (regnum),
+ REGISTER_VIRTUAL_SIZE (regnum));
+ VALUE_LVAL (reg_val) = lval;
+ VALUE_ADDRESS (reg_val) = addr;
+ VALUE_REGNO (reg_val) = regnum;
+ VALUE_OPTIMIZED_OUT (reg_val) = optim;
+ return reg_val;
}
-/* Copy LEN bytes of consecutive data from memory at MYADDR
- into registers starting with the REGBYTE'th byte of register data. */
-
-void
-write_register_bytes (regbyte, myaddr, len)
- int regbyte;
- char *myaddr;
- int len;
+/* Given a pointer of type TYPE in target form in BUF, return the
+ address it represents. */
+CORE_ADDR
+unsigned_pointer_to_address (struct type *type, void *buf)
{
- /* Make sure the entire registers array is valid. */
- read_register_bytes (0, (char *)NULL, REGISTER_BYTES);
- memcpy (®isters[regbyte], myaddr, len);
- target_store_registers (-1);
+ return extract_address (buf, TYPE_LENGTH (type));
}
-/* Return the raw contents of register REGNO, regarding it as an integer. */
-/* This probably should be returning LONGEST rather than CORE_ADDR. */
-
CORE_ADDR
-read_register (regno)
- int regno;
+signed_pointer_to_address (struct type *type, void *buf)
{
- if (!register_valid[regno])
- target_fetch_registers (regno);
-
- return extract_address (®isters[REGISTER_BYTE (regno)],
- REGISTER_RAW_SIZE(regno));
+ return extract_signed_integer (buf, TYPE_LENGTH (type));
}
-/* Registers we shouldn't try to store. */
-#if !defined (CANNOT_STORE_REGISTER)
-#define CANNOT_STORE_REGISTER(regno) 0
-#endif
-
-/* Store VALUE, into the raw contents of register number REGNO. */
-/* FIXME: The val arg should probably be a LONGEST. */
-
+/* Given an address, store it as a pointer of type TYPE in target
+ format in BUF. */
void
-write_register (regno, val)
- int regno;
- LONGEST val;
+unsigned_address_to_pointer (struct type *type, void *buf, CORE_ADDR addr)
{
- PTR buf;
- int size;
-
- /* On the sparc, writing %g0 is a no-op, so we don't even want to change
- the registers array if something writes to this register. */
- if (CANNOT_STORE_REGISTER (regno))
- return;
-
- size = REGISTER_RAW_SIZE(regno);
- buf = alloca (size);
- store_signed_integer (buf, size, (LONGEST) val);
-
- /* If we have a valid copy of the register, and new value == old value,
- then don't bother doing the actual store. */
-
- if (register_valid [regno])
- {
- if (memcmp (®isters[REGISTER_BYTE (regno)], buf, size) == 0)
- return;
- }
-
- target_prepare_to_store ();
-
- memcpy (®isters[REGISTER_BYTE (regno)], buf, size);
-
- register_valid [regno] = 1;
-
- target_store_registers (regno);
+ store_address (buf, TYPE_LENGTH (type), addr);
}
-/* Record that register REGNO contains VAL.
- This is used when the value is obtained from the inferior or core dump,
- so there is no need to store the value there. */
-
void
-supply_register (regno, val)
- int regno;
- char *val;
+address_to_signed_pointer (struct type *type, void *buf, CORE_ADDR addr)
{
- register_valid[regno] = 1;
- memcpy (®isters[REGISTER_BYTE (regno)], val, REGISTER_RAW_SIZE (regno));
-
- /* On some architectures, e.g. HPPA, there are a few stray bits in some
- registers, that the rest of the code would like to ignore. */
-#ifdef CLEAN_UP_REGISTER_VALUE
- CLEAN_UP_REGISTER_VALUE(regno, ®isters[REGISTER_BYTE(regno)]);
-#endif
+ store_signed_integer (buf, TYPE_LENGTH (type), addr);
}
\f
/* Will calling read_var_value or locate_var_value on SYM end
up caring what frame it is being evaluated relative to? SYM must
be non-NULL. */
int
-symbol_read_needs_frame (sym)
- struct symbol *sym;
+symbol_read_needs_frame (struct symbol *sym)
{
switch (SYMBOL_CLASS (sym))
{
/* All cases listed explicitly so that gcc -Wall will detect it if
- we failed to consider one. */
+ we failed to consider one. */
case LOC_REGISTER:
case LOC_ARG:
case LOC_REF_ARG:
case LOC_LOCAL_ARG:
case LOC_BASEREG:
case LOC_BASEREG_ARG:
+ case LOC_THREAD_LOCAL_STATIC:
return 1;
case LOC_UNDEF:
case LOC_CONST:
case LOC_STATIC:
+ case LOC_INDIRECT:
case LOC_TYPEDEF:
case LOC_LABEL:
/* Getting the address of a label can be done independently of the block,
- even if some *uses* of that address wouldn't work so well without
- the right frame. */
+ even if some *uses* of that address wouldn't work so well without
+ the right frame. */
case LOC_BLOCK:
case LOC_CONST_BYTES:
+ case LOC_UNRESOLVED:
case LOC_OPTIMIZED_OUT:
return 0;
}
If the variable cannot be found, return a zero pointer.
If FRAME is NULL, use the selected_frame. */
-value
-read_var_value (var, frame)
- register struct symbol *var;
- FRAME frame;
+struct value *
+read_var_value (register struct symbol *var, struct frame_info *frame)
{
- register value v;
- struct frame_info *fi;
+ register struct value *v;
struct type *type = SYMBOL_TYPE (var);
CORE_ADDR addr;
register int len;
v = allocate_value (type);
VALUE_LVAL (v) = lval_memory; /* The most likely possibility. */
+ VALUE_BFD_SECTION (v) = SYMBOL_BFD_SECTION (var);
+
len = TYPE_LENGTH (type);
- if (frame == 0) frame = selected_frame;
+ if (frame == NULL)
+ frame = selected_frame;
switch (SYMBOL_CLASS (var))
{
case LOC_LABEL:
/* Put the constant back in target format. */
- store_address (VALUE_CONTENTS_RAW (v), len, SYMBOL_VALUE_ADDRESS (var));
+ if (overlay_debugging)
+ {
+ CORE_ADDR addr
+ = symbol_overlayed_address (SYMBOL_VALUE_ADDRESS (var),
+ SYMBOL_BFD_SECTION (var));
+ store_typed_address (VALUE_CONTENTS_RAW (v), type, addr);
+ }
+ else
+ store_typed_address (VALUE_CONTENTS_RAW (v), type,
+ SYMBOL_VALUE_ADDRESS (var));
VALUE_LVAL (v) = not_lval;
return v;
}
case LOC_STATIC:
- addr = SYMBOL_VALUE_ADDRESS (var);
+ if (overlay_debugging)
+ addr = symbol_overlayed_address (SYMBOL_VALUE_ADDRESS (var),
+ SYMBOL_BFD_SECTION (var));
+ else
+ addr = SYMBOL_VALUE_ADDRESS (var);
break;
+ case LOC_INDIRECT:
+ {
+ /* The import slot does not have a real address in it from the
+ dynamic loader (dld.sl on HP-UX), if the target hasn't
+ begun execution yet, so check for that. */
+ CORE_ADDR locaddr;
+ struct value *loc;
+ if (!target_has_execution)
+ error ("\
+Attempt to access variable defined in different shared object or load module when\n\
+addresses have not been bound by the dynamic loader. Try again when executable is running.");
+
+ locaddr = SYMBOL_VALUE_ADDRESS (var);
+ loc = value_at (lookup_pointer_type (type), locaddr, NULL);
+ addr = value_as_address (loc);
+ }
+
case LOC_ARG:
- fi = get_frame_info (frame);
- if (fi == NULL)
+ if (frame == NULL)
return 0;
- addr = FRAME_ARGS_ADDRESS (fi);
+ addr = FRAME_ARGS_ADDRESS (frame);
if (!addr)
- {
- return 0;
- }
+ return 0;
addr += SYMBOL_VALUE (var);
break;
case LOC_REF_ARG:
- fi = get_frame_info (frame);
- if (fi == NULL)
- return 0;
- addr = FRAME_ARGS_ADDRESS (fi);
- if (!addr)
- {
+ {
+ struct value *ref;
+ CORE_ADDR argref;
+ if (frame == NULL)
return 0;
- }
- addr += SYMBOL_VALUE (var);
- addr = read_memory_unsigned_integer
- (addr, TARGET_PTR_BIT / TARGET_CHAR_BIT);
- break;
+ argref = FRAME_ARGS_ADDRESS (frame);
+ if (!argref)
+ return 0;
+ argref += SYMBOL_VALUE (var);
+ ref = value_at (lookup_pointer_type (type), argref, NULL);
+ addr = value_as_address (ref);
+ break;
+ }
case LOC_LOCAL:
case LOC_LOCAL_ARG:
- fi = get_frame_info (frame);
- if (fi == NULL)
+ if (frame == NULL)
return 0;
- addr = FRAME_LOCALS_ADDRESS (fi);
+ addr = FRAME_LOCALS_ADDRESS (frame);
addr += SYMBOL_VALUE (var);
break;
case LOC_BASEREG:
case LOC_BASEREG_ARG:
+ case LOC_THREAD_LOCAL_STATIC:
{
- char buf[MAX_REGISTER_RAW_SIZE];
- get_saved_register (buf, NULL, NULL, frame, SYMBOL_BASEREG (var),
- NULL);
- addr = extract_address (buf, REGISTER_RAW_SIZE (SYMBOL_BASEREG (var)));
+ struct value *regval;
+
+ regval = value_from_register (lookup_pointer_type (type),
+ SYMBOL_BASEREG (var), frame);
+ if (regval == NULL)
+ error ("Value of base register not available.");
+ addr = value_as_address (regval);
addr += SYMBOL_VALUE (var);
break;
}
-
+
case LOC_TYPEDEF:
error ("Cannot look up value of a typedef");
break;
case LOC_BLOCK:
- VALUE_ADDRESS (v) = BLOCK_START (SYMBOL_BLOCK_VALUE (var));
+ if (overlay_debugging)
+ VALUE_ADDRESS (v) = symbol_overlayed_address
+ (BLOCK_START (SYMBOL_BLOCK_VALUE (var)), SYMBOL_BFD_SECTION (var));
+ else
+ VALUE_ADDRESS (v) = BLOCK_START (SYMBOL_BLOCK_VALUE (var));
return v;
case LOC_REGISTER:
case LOC_REGPARM_ADDR:
{
struct block *b;
+ int regno = SYMBOL_VALUE (var);
+ struct value *regval;
if (frame == NULL)
return 0;
b = get_frame_block (frame);
-
- v = value_from_register (type, SYMBOL_VALUE (var), frame);
if (SYMBOL_CLASS (var) == LOC_REGPARM_ADDR)
{
- addr = *(CORE_ADDR *)VALUE_CONTENTS (v);
+ regval = value_from_register (lookup_pointer_type (type),
+ regno,
+ frame);
+
+ if (regval == NULL)
+ error ("Value of register variable not available.");
+
+ addr = value_as_address (regval);
VALUE_LVAL (v) = lval_memory;
}
else
- return v;
+ {
+ regval = value_from_register (type, regno, frame);
+
+ if (regval == NULL)
+ error ("Value of register variable not available.");
+ return regval;
+ }
+ }
+ break;
+
+ case LOC_UNRESOLVED:
+ {
+ struct minimal_symbol *msym;
+
+ msym = lookup_minimal_symbol (SYMBOL_NAME (var), NULL, NULL);
+ if (msym == NULL)
+ return 0;
+ if (overlay_debugging)
+ addr = symbol_overlayed_address (SYMBOL_VALUE_ADDRESS (msym),
+ SYMBOL_BFD_SECTION (msym));
+ else
+ addr = SYMBOL_VALUE_ADDRESS (msym);
}
break;
}
/* Return a value of type TYPE, stored in register REGNUM, in frame
- FRAME. */
+ FRAME.
-value
-value_from_register (type, regnum, frame)
- struct type *type;
- int regnum;
- FRAME frame;
+ NOTE: returns NULL if register value is not available.
+ Caller will check return value or die! */
+
+struct value *
+value_from_register (struct type *type, int regnum, struct frame_info *frame)
{
- char raw_buffer [MAX_REGISTER_RAW_SIZE];
- char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
+ char *raw_buffer = (char*) alloca (MAX_REGISTER_RAW_SIZE);
CORE_ADDR addr;
int optim;
- value v = allocate_value (type);
- int len = TYPE_LENGTH (type);
+ struct value *v = allocate_value (type);
char *value_bytes = 0;
int value_bytes_copied = 0;
int num_storage_locs;
enum lval_type lval;
+ int len;
+
+ CHECK_TYPEDEF (type);
+ len = TYPE_LENGTH (type);
VALUE_REGNO (v) = regnum;
#ifdef GDB_TARGET_IS_H8500
|| TYPE_CODE (type) == TYPE_CODE_PTR
#endif
- )
+ )
{
/* Value spread across multiple storage locations. */
-
+
int local_regnum;
int mem_stor = 0, reg_stor = 0;
int mem_tracking = 1;
switch (regnum)
{
- case R0_REGNUM: case R1_REGNUM: case R2_REGNUM: case R3_REGNUM:
+ case R0_REGNUM:
+ case R1_REGNUM:
+ case R2_REGNUM:
+ case R3_REGNUM:
page_regnum = SEG_D_REGNUM;
break;
- case R4_REGNUM: case R5_REGNUM:
+ case R4_REGNUM:
+ case R5_REGNUM:
page_regnum = SEG_E_REGNUM;
break;
- case R6_REGNUM: case R7_REGNUM:
+ case R6_REGNUM:
+ case R7_REGNUM:
page_regnum = SEG_T_REGNUM;
break;
}
page_regnum,
&lval);
+ if (register_cached (page_regnum) == -1)
+ return NULL; /* register value not available */
+
if (lval == lval_register)
reg_stor++;
else
regnum,
&lval);
+ if (register_cached (regnum) == -1)
+ return NULL; /* register value not available */
+
if (lval == lval_register)
reg_stor++;
else
last_addr = addr;
}
else
-#endif /* GDB_TARGET_IS_H8500 */
+#endif /* GDB_TARGET_IS_H8500 */
for (local_regnum = regnum;
value_bytes_copied < len;
(value_bytes_copied += REGISTER_RAW_SIZE (local_regnum),
local_regnum,
&lval);
+ if (register_cached (local_regnum) == -1)
+ return NULL; /* register value not available */
+
if (regnum == local_regnum)
first_addr = addr;
if (lval == lval_register)
else
{
mem_stor++;
-
+
mem_tracking =
(mem_tracking
&& (regnum == local_regnum
VALUE_ADDRESS (v) = first_addr;
}
else
- fatal ("value_from_register: Value not stored anywhere!");
+ internal_error (__FILE__, __LINE__,
+ "value_from_register: Value not stored anywhere!");
VALUE_OPTIMIZED_OUT (v) = optim;
/* Any structure stored in more than one register will always be
- an integral number of registers. Otherwise, you'd need to do
- some fiddling with the last register copied here for little
- endian machines. */
+ an integral number of registers. Otherwise, you'd need to do
+ some fiddling with the last register copied here for little
+ endian machines. */
/* Copy into the contents section of the value. */
memcpy (VALUE_CONTENTS_RAW (v), value_bytes, len);
/* Finally do any conversion necessary when extracting this
type from more than one register. */
#ifdef REGISTER_CONVERT_TO_TYPE
- REGISTER_CONVERT_TO_TYPE(regnum, type, VALUE_CONTENTS_RAW(v));
+ REGISTER_CONVERT_TO_TYPE (regnum, type, VALUE_CONTENTS_RAW (v));
#endif
return v;
}
read the data in raw format. */
get_saved_register (raw_buffer, &optim, &addr, frame, regnum, &lval);
+
+ if (register_cached (regnum) == -1)
+ return NULL; /* register value not available */
+
VALUE_OPTIMIZED_OUT (v) = optim;
VALUE_LVAL (v) = lval;
VALUE_ADDRESS (v) = addr;
-
- /* Convert the raw contents to virtual contents.
- (Just copy them if the formats are the same.) */
-
- REGISTER_CONVERT_TO_VIRTUAL (regnum, raw_buffer, virtual_buffer);
-
+
+ /* Convert raw data to virtual format if necessary. */
+
if (REGISTER_CONVERTIBLE (regnum))
{
- /* When the raw and virtual formats differ, the virtual format
- corresponds to a specific data type. If we want that type,
- copy the data into the value.
- Otherwise, do a type-conversion. */
-
- if (type != REGISTER_VIRTUAL_TYPE (regnum))
- {
- /* eg a variable of type `float' in a 68881 register
- with raw type `extended' and virtual type `double'.
- Fetch it as a `double' and then convert to `float'. */
- /* FIXME: This value will be not_lval, which means we can't assign
- to it. Probably the right fix is to do the cast on a temporary
- value, and just copy the VALUE_CONTENTS over. */
- v = allocate_value (REGISTER_VIRTUAL_TYPE (regnum));
- memcpy (VALUE_CONTENTS_RAW (v), virtual_buffer,
- REGISTER_VIRTUAL_SIZE (regnum));
- v = value_cast (type, v);
- }
- else
- memcpy (VALUE_CONTENTS_RAW (v), virtual_buffer, len);
+ REGISTER_CONVERT_TO_VIRTUAL (regnum, type,
+ raw_buffer, VALUE_CONTENTS_RAW (v));
}
else
{
/* Raw and virtual formats are the same for this register. */
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
- if (len < REGISTER_RAW_SIZE (regnum))
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN && len < REGISTER_RAW_SIZE (regnum))
{
- /* Big-endian, and we want less than full size. */
+ /* Big-endian, and we want less than full size. */
VALUE_OFFSET (v) = REGISTER_RAW_SIZE (regnum) - len;
}
-#endif
- memcpy (VALUE_CONTENTS_RAW (v), virtual_buffer + VALUE_OFFSET (v), len);
+ memcpy (VALUE_CONTENTS_RAW (v), raw_buffer + VALUE_OFFSET (v), len);
}
-
+
return v;
}
\f
return a (pointer to a) struct value containing the properly typed
address. */
-value
-locate_var_value (var, frame)
- register struct symbol *var;
- FRAME frame;
+struct value *
+locate_var_value (register struct symbol *var, struct frame_info *frame)
{
CORE_ADDR addr = 0;
struct type *type = SYMBOL_TYPE (var);
- value lazy_value;
+ struct value *lazy_value;
/* Evaluate it first; if the result is a memory address, we're fine.
Lazy evaluation pays off here. */
if (VALUE_LAZY (lazy_value)
|| TYPE_CODE (type) == TYPE_CODE_FUNC)
{
+ struct value *val;
+
addr = VALUE_ADDRESS (lazy_value);
- return value_from_longest (lookup_pointer_type (type), (LONGEST) addr);
+ val = value_from_pointer (lookup_pointer_type (type), addr);
+ VALUE_BFD_SECTION (val) = VALUE_BFD_SECTION (lazy_value);
+ return val;
}
/* Not a memory address; check what the problem was. */
- switch (VALUE_LVAL (lazy_value))
+ switch (VALUE_LVAL (lazy_value))
{
case lval_register:
case lval_reg_frame_relative:
SYMBOL_SOURCE_NAME (var));
break;
}
- return 0; /* For lint -- never reached */
+ return 0; /* For lint -- never reached */
}