/* Fork a Unix child process, and set up to debug it, for GDB.
- Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+
+ Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999,
+ 2000, 2001, 2004 Free Software Foundation, Inc.
+
Contributed by Cygnus Support.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#include "defs.h"
-#include <string.h>
-#include "frame.h" /* required by inferior.h */
+#include "gdb_string.h"
+#include "frame.h" /* required by inferior.h */
#include "inferior.h"
#include "target.h"
-#include "wait.h"
+#include "gdb_wait.h"
+#include "gdb_vfork.h"
#include "gdbcore.h"
#include "terminal.h"
-#include "thread.h"
+#include "gdbthread.h"
+#include "command.h" /* for dont_repeat () */
+#include "solib.h"
#include <signal.h>
-#ifdef SET_STACK_LIMIT_HUGE
-#include <sys/time.h>
-#include <sys/resource.h>
-
-extern int original_stack_limit;
-#endif /* SET_STACK_LIMIT_HUGE */
-
-extern char **environ;
-
+/* This just gets used as a default if we can't find SHELL. */
#ifndef SHELL_FILE
#define SHELL_FILE "/bin/sh"
#endif
-/* Start an inferior Unix child process and sets inferior_pid to its pid.
- EXEC_FILE is the file to run.
- ALLARGS is a string containing the arguments to the program.
- ENV is the environment vector to pass. SHELL_FILE is the shell file,
- or NULL if we should pick one. Errors reported with error(). */
+extern char **environ;
+
+/* Break up SCRATCH into an argument vector suitable for passing to
+ execvp and store it in ARGV. E.g., on "run a b c d" this routine
+ would get as input the string "a b c d", and as output it would
+ fill in ARGV with the four arguments "a", "b", "c", "d". */
+
+static void
+breakup_args (char *scratch, char **argv)
+{
+ char *cp = scratch;
+
+ for (;;)
+ {
+ /* Scan past leading separators */
+ while (*cp == ' ' || *cp == '\t' || *cp == '\n')
+ cp++;
+
+ /* Break if at end of string. */
+ if (*cp == '\0')
+ break;
+
+ /* Take an arg. */
+ *argv++ = cp;
+
+ /* Scan for next arg separator. */
+ cp = strchr (cp, ' ');
+ if (cp == NULL)
+ cp = strchr (cp, '\t');
+ if (cp == NULL)
+ cp = strchr (cp, '\n');
+
+ /* No separators => end of string => break. */
+ if (cp == NULL)
+ break;
+
+ /* Replace the separator with a terminator. */
+ *cp++ = '\0';
+ }
+
+ /* Null-terminate the vector. */
+ *argv = NULL;
+}
+
+/* When executing a command under the given shell, return non-zero if
+ the '!' character should be escaped when embedded in a quoted
+ command-line argument. */
+
+static int
+escape_bang_in_quoted_argument (const char *shell_file)
+{
+ const int shell_file_len = strlen (shell_file);
+
+ /* Bang should be escaped only in C Shells. For now, simply check
+ that the shell name ends with 'csh', which covers at least csh
+ and tcsh. This should be good enough for now. */
+
+ if (shell_file_len < 3)
+ return 0;
+
+ if (shell_file[shell_file_len - 3] == 'c'
+ && shell_file[shell_file_len - 2] == 's'
+ && shell_file[shell_file_len - 1] == 'h')
+ return 1;
+
+ return 0;
+}
+
+/* Start an inferior Unix child process and sets inferior_ptid to its
+ pid. EXEC_FILE is the file to run. ALLARGS is a string containing
+ the arguments to the program. ENV is the environment vector to
+ pass. SHELL_FILE is the shell file, or NULL if we should pick
+ one. */
+
+/* This function is NOT reentrant. Some of the variables have been
+ made static to ensure that they survive the vfork call. */
void
-fork_inferior (exec_file, allargs, env, traceme_fun, init_trace_fun,
- shell_file)
- char *exec_file;
- char *allargs;
- char **env;
- void (*traceme_fun) PARAMS ((void));
- void (*init_trace_fun) PARAMS ((int));
- char *shell_file;
+fork_inferior (char *exec_file_arg, char *allargs, char **env,
+ void (*traceme_fun) (void), void (*init_trace_fun) (int),
+ void (*pre_trace_fun) (void), char *shell_file_arg)
{
int pid;
char *shell_command;
/* This is set to the result of setpgrp, which if vforked, will be visible
to you in the parent process. It's only used by humans for debugging. */
static int debug_setpgrp = 657473;
+ static char *shell_file;
+ static char *exec_file;
char **save_our_env;
+ int shell = 0;
+ static char **argv;
+ const char *inferior_io_terminal = get_inferior_io_terminal ();
- /* If no exec file handed to us, get it from the exec-file command -- with
- a good, common error message if none is specified. */
+ /* If no exec file handed to us, get it from the exec-file command
+ -- with a good, common error message if none is specified. */
+ exec_file = exec_file_arg;
if (exec_file == 0)
- exec_file = get_exec_file(1);
-
- /* The user might want tilde-expansion, and in general probably wants
- the program to behave the same way as if run from
- his/her favorite shell. So we let the shell run it for us.
- FIXME-maybe, we might want a "set shell" command so the user can change
- the shell from within GDB (if so, change callers which pass in a non-NULL
- shell_file too). */
- if (shell_file == NULL)
- shell_file = getenv ("SHELL");
- if (shell_file == NULL)
- shell_file = default_shell_file;
-
- /* Multiplying the length of exec_file by 4 is to account for the fact
- that it may expand when quoted; it is a worst-case number based on
- every character being '. */
- len = 5 + 4 * strlen (exec_file) + 1 + strlen (allargs) + 1 + /*slop*/ 12;
+ exec_file = get_exec_file (1);
+
+ /* STARTUP_WITH_SHELL is defined in inferior.h. If 0,e we'll just
+ do a fork/exec, no shell, so don't bother figuring out what
+ shell. */
+ shell_file = shell_file_arg;
+ if (STARTUP_WITH_SHELL)
+ {
+ /* Figure out what shell to start up the user program under. */
+ if (shell_file == NULL)
+ shell_file = getenv ("SHELL");
+ if (shell_file == NULL)
+ shell_file = default_shell_file;
+ shell = 1;
+ }
+
+ /* Multiplying the length of exec_file by 4 is to account for the
+ fact that it may expand when quoted; it is a worst-case number
+ based on every character being '. */
+ len = 5 + 4 * strlen (exec_file) + 1 + strlen (allargs) + 1 + /*slop */ 12;
/* If desired, concat something onto the front of ALLARGS.
SHELL_COMMAND is the result. */
#ifdef SHELL_COMMAND_CONCAT
shell_command = (char *) alloca (len);
shell_command[0] = '\0';
#endif
- strcat (shell_command, "exec ");
-
- /* Now add exec_file, quoting as necessary. */
- {
- char *p;
- int need_to_quote;
-
- /* Quoting in this style is said to work with all shells. But csh
- on IRIX 4.0.1 can't deal with it. So we only quote it if we need
- to. */
- p = exec_file;
- while (1)
- {
- switch (*p)
- {
- case '\'':
- case '"':
- case '(':
- case ')':
- case '$':
- case '&':
- case ';':
- case '<':
- case '>':
- case ' ':
- case '\n':
- case '\t':
- need_to_quote = 1;
- goto end_scan;
-
- case '\0':
- need_to_quote = 0;
- goto end_scan;
-
- default:
- break;
- }
- ++p;
- }
- end_scan:
- if (need_to_quote)
- {
- strcat (shell_command, "'");
- for (p = exec_file; *p != '\0'; ++p)
- {
- if (*p == '\'')
- strcat (shell_command, "'\\''");
- else
- strncat (shell_command, p, 1);
- }
- strcat (shell_command, "'");
- }
- else
- strcat (shell_command, exec_file);
- }
-
- strcat (shell_command, " ");
- strcat (shell_command, allargs);
-
- /* exec is said to fail if the executable is open. */
+
+ if (!shell)
+ {
+ /* We're going to call execvp. Create argument vector.
+ Calculate an upper bound on the length of the vector by
+ assuming that every other character is a separate
+ argument. */
+ int argc = (strlen (allargs) + 1) / 2 + 2;
+ argv = (char **) xmalloc (argc * sizeof (*argv));
+ argv[0] = exec_file;
+ breakup_args (allargs, &argv[1]);
+ }
+ else
+ {
+ /* We're going to call a shell. */
+
+ /* Now add exec_file, quoting as necessary. */
+
+ char *p;
+ int need_to_quote;
+ const int escape_bang = escape_bang_in_quoted_argument (shell_file);
+
+ strcat (shell_command, "exec ");
+
+ /* Quoting in this style is said to work with all shells. But
+ csh on IRIX 4.0.1 can't deal with it. So we only quote it if
+ we need to. */
+ p = exec_file;
+ while (1)
+ {
+ switch (*p)
+ {
+ case '\'':
+ case '!':
+ case '"':
+ case '(':
+ case ')':
+ case '$':
+ case '&':
+ case ';':
+ case '<':
+ case '>':
+ case ' ':
+ case '\n':
+ case '\t':
+ need_to_quote = 1;
+ goto end_scan;
+
+ case '\0':
+ need_to_quote = 0;
+ goto end_scan;
+
+ default:
+ break;
+ }
+ ++p;
+ }
+ end_scan:
+ if (need_to_quote)
+ {
+ strcat (shell_command, "'");
+ for (p = exec_file; *p != '\0'; ++p)
+ {
+ if (*p == '\'')
+ strcat (shell_command, "'\\''");
+ else if (*p == '!' && escape_bang)
+ strcat (shell_command, "\\!");
+ else
+ strncat (shell_command, p, 1);
+ }
+ strcat (shell_command, "'");
+ }
+ else
+ strcat (shell_command, exec_file);
+
+ strcat (shell_command, " ");
+ strcat (shell_command, allargs);
+ }
+
+ /* On some systems an exec will fail if the executable is open. */
close_exec_file ();
/* Retain a copy of our environment variables, since the child will
- replace the value of environ and if we're vforked, we have to
+ replace the value of environ and if we're vforked, we have to
restore it. */
save_our_env = environ;
/* Tell the terminal handling subsystem what tty we plan to run on;
it will just record the information for later. */
-
new_tty_prefork (inferior_io_terminal);
/* It is generally good practice to flush any possible pending stdio
- output prior to doing a fork, to avoid the possibility of both the
- parent and child flushing the same data after the fork. */
-
+ output prior to doing a fork, to avoid the possibility of both
+ the parent and child flushing the same data after the fork. */
gdb_flush (gdb_stdout);
gdb_flush (gdb_stderr);
-#if defined(USG) && !defined(HAVE_VFORK)
- pid = fork ();
-#else
- if (debug_fork)
+ /* If there's any initialization of the target layers that must
+ happen to prepare to handle the child we're about fork, do it
+ now... */
+ if (pre_trace_fun != NULL)
+ (*pre_trace_fun) ();
+
+ /* Create the child process. Since the child process is going to
+ exec(3) shortlty afterwards, try to reduce the overhead by
+ calling vfork(2). However, if PRE_TRACE_FUN is non-null, it's
+ likely that this optimization won't work since there's too much
+ work to do between the vfork(2) and the exec(3). This is known
+ to be the case on ttrace(2)-based HP-UX, where some handshaking
+ between parent and child needs to happen between fork(2) and
+ exec(2). However, since the parent is suspended in the vforked
+ state, this doesn't work. Also note that the vfork(2) call might
+ actually be a call to fork(2) due to the fact that autoconf will
+ ``#define vfork fork'' on certain platforms. */
+ if (pre_trace_fun || debug_fork)
pid = fork ();
else
pid = vfork ();
-#endif
if (pid < 0)
- perror_with_name ("vfork");
+ perror_with_name (("vfork"));
if (pid == 0)
{
- if (debug_fork)
+ if (debug_fork)
sleep (debug_fork);
/* Run inferior in a separate process group. */
debug_setpgrp = gdb_setpgid ();
if (debug_setpgrp == -1)
- perror("setpgrp failed in child");
-
-#ifdef SET_STACK_LIMIT_HUGE
- /* Reset the stack limit back to what it was. */
- {
- struct rlimit rlim;
-
- getrlimit (RLIMIT_STACK, &rlim);
- rlim.rlim_cur = original_stack_limit;
- setrlimit (RLIMIT_STACK, &rlim);
- }
-#endif /* SET_STACK_LIMIT_HUGE */
-
- /* Ask the tty subsystem to switch to the one we specified earlier
- (or to share the current terminal, if none was specified). */
+ perror ("setpgrp failed in child");
+ /* Ask the tty subsystem to switch to the one we specified
+ earlier (or to share the current terminal, if none was
+ specified). */
new_tty ();
/* Changing the signal handlers for the inferior after
- a vfork can also change them for the superior, so we don't mess
- with signals here. See comments in
- initialize_signals for how we get the right signal handlers
- for the inferior. */
+ a vfork can also change them for the superior, so we don't mess
+ with signals here. See comments in
+ initialize_signals for how we get the right signal handlers
+ for the inferior. */
/* "Trace me, Dr. Memory!" */
(*traceme_fun) ();
+ /* The call above set this process (the "child") as debuggable
+ by the original gdb process (the "parent"). Since processes
+ (unlike people) can have only one parent, if you are debugging
+ gdb itself (and your debugger is thus _already_ the
+ controller/parent for this child), code from here on out is
+ undebuggable. Indeed, you probably got an error message
+ saying "not parent". Sorry; you'll have to use print
+ statements! */
+
/* There is no execlpe call, so we have to set the environment
- for our child in the global variable. If we've vforked, this
- clobbers the parent, but environ is restored a few lines down
- in the parent. By the way, yes we do need to look down the
- path to find $SHELL. Rich Pixley says so, and I agree. */
+ for our child in the global variable. If we've vforked, this
+ clobbers the parent, but environ is restored a few lines down
+ in the parent. By the way, yes we do need to look down the
+ path to find $SHELL. Rich Pixley says so, and I agree. */
environ = env;
- execlp (shell_file, shell_file, "-c", shell_command, (char *)0);
- fprintf_unfiltered (gdb_stderr, "Cannot exec %s: %s.\n", shell_file,
- safe_strerror (errno));
- gdb_flush (gdb_stderr);
- _exit (0177);
+ /* If we decided above to start up with a shell, we exec the
+ shell, "-c" says to interpret the next arg as a shell command
+ to execute, and this command is "exec <target-program>
+ <args>". "-f" means "fast startup" to the c-shell, which
+ means don't do .cshrc file. Doing .cshrc may cause fork/exec
+ events which will confuse debugger start-up code. */
+ if (shell)
+ {
+ execlp (shell_file, shell_file, "-c", shell_command, (char *) 0);
+
+ /* If we get here, it's an error. */
+ fprintf_unfiltered (gdb_stderr, "Cannot exec %s: %s.\n", shell_file,
+ safe_strerror (errno));
+ gdb_flush (gdb_stderr);
+ _exit (0177);
+ }
+ else
+ {
+ /* Otherwise, we directly exec the target program with
+ execvp. */
+ int i;
+ char *errstring;
+
+ execvp (exec_file, argv);
+
+ /* If we get here, it's an error. */
+ errstring = safe_strerror (errno);
+ fprintf_unfiltered (gdb_stderr, "Cannot exec %s ", exec_file);
+
+ i = 1;
+ while (argv[i] != NULL)
+ {
+ if (i != 1)
+ fprintf_unfiltered (gdb_stderr, " ");
+ fprintf_unfiltered (gdb_stderr, "%s", argv[i]);
+ i++;
+ }
+ fprintf_unfiltered (gdb_stderr, ".\n");
+#if 0
+ /* This extra info seems to be useless. */
+ fprintf_unfiltered (gdb_stderr, "Got error %s.\n", errstring);
+#endif
+ gdb_flush (gdb_stderr);
+ _exit (0177);
+ }
}
/* Restore our environment in case a vforked child clob'd it. */
environ = save_our_env;
- init_thread_list();
+ init_thread_list ();
- inferior_pid = pid; /* Needed for wait_for_inferior stuff below */
+ /* Needed for wait_for_inferior stuff below. */
+ inferior_ptid = pid_to_ptid (pid);
/* Now that we have a child process, make it our target, and
- initialize anything target-vector-specific that needs initializing. */
- (*init_trace_fun)(pid);
+ initialize anything target-vector-specific that needs
+ initializing. */
+ (*init_trace_fun) (pid);
/* We are now in the child process of interest, having exec'd the
correct program, and are poised at the first instruction of the
new program. */
+
+ /* Allow target dependent code to play with the new process. This
+ might be used to have target-specific code initialize a variable
+ in the new process prior to executing the first instruction. */
+ TARGET_CREATE_INFERIOR_HOOK (pid);
+
#ifdef SOLIB_CREATE_INFERIOR_HOOK
SOLIB_CREATE_INFERIOR_HOOK (pid);
+#else
+ solib_create_inferior_hook ();
#endif
}
/* Accept NTRAPS traps from the inferior. */
void
-startup_inferior (ntraps)
- int ntraps;
+startup_inferior (int ntraps)
{
int pending_execs = ntraps;
- int terminal_initted;
+ int terminal_initted = 0;
- /* The process was started by the fork that created it,
- but it will have stopped one instruction after execing the shell.
- Here we must get it up to actual execution of the real program. */
+ /* The process was started by the fork that created it, but it will
+ have stopped one instruction after execing the shell. Here we
+ must get it up to actual execution of the real program. */
clear_proceed_status ();
init_wait_for_inferior ();
- terminal_initted = 0;
+ if (STARTUP_WITH_SHELL)
+ inferior_ignoring_startup_exec_events = ntraps;
+ else
+ inferior_ignoring_startup_exec_events = 0;
+ inferior_ignoring_leading_exec_events =
+ target_reported_exec_events_per_exec_call () - 1;
while (1)
{
- stop_soon_quietly = 1; /* Make wait_for_inferior be quiet */
+ /* Make wait_for_inferior be quiet. */
+ stop_soon = STOP_QUIETLY;
wait_for_inferior ();
if (stop_signal != TARGET_SIGNAL_TRAP)
{
- /* Let shell child handle its own signals in its own way */
- /* FIXME, what if child has exit()ed? Must exit loop somehow */
+ /* Let shell child handle its own signals in its own way.
+ FIXME: what if child has exited? Must exit loop
+ somehow. */
resume (0, stop_signal);
}
else
/* We handle SIGTRAP, however; it means child did an exec. */
if (!terminal_initted)
{
- /* Now that the child has exec'd we know it has already set its
- process group. On POSIX systems, tcsetpgrp will fail with
- EPERM if we try it before the child's setpgid. */
+ /* Now that the child has exec'd we know it has already
+ set its process group. On POSIX systems, tcsetpgrp
+ will fail with EPERM if we try it before the child's
+ setpgid. */
/* Set up the "saved terminal modes" of the inferior
- based on what modes we are starting it with. */
+ based on what modes we are starting it with. */
target_terminal_init ();
/* Install inferior's terminal modes. */
terminal_initted = 1;
}
- if (0 == --pending_execs)
+
+ if (--pending_execs == 0)
break;
- resume (0, TARGET_SIGNAL_0); /* Just make it go on */
+
+ resume (0, TARGET_SIGNAL_0); /* Just make it go on. */
}
}
- stop_soon_quietly = 0;
+ stop_soon = NO_STOP_QUIETLY;
}