/* Definitions for dealing with stack frames, for GDB, the GNU debugger.
Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
This file is part of GDB.
#if !defined (FRAME_H)
#define FRAME_H 1
-/* Return the location (and possibly value) of REGNUM for the previous
- (older, up) frame. All parameters except VALUEP can be assumed to
- be non NULL. When VALUEP is NULL, just the location of the
- register should be returned.
-
- UNWIND_CACHE is provided as mechanism for implementing a per-frame
- local cache. It's initial value being NULL. Memory for that cache
- should be allocated using frame_obstack_alloc().
-
- Register window architectures (eg SPARC) should note that REGNUM
- identifies the register for the previous frame. For instance, a
- request for the value of "o1" for the previous frame would be found
- in the register "i1" in this FRAME. */
-
-typedef void (frame_register_unwind_ftype) (struct frame_info *frame,
- void **unwind_cache,
- int regnum,
- int *optimized,
- enum lval_type *lvalp,
- CORE_ADDR *addrp,
- int *realnump,
- void *valuep);
-
-/* Describe the saved registers of a frame. */
-
-#if defined (EXTRA_FRAME_INFO) || defined (FRAME_FIND_SAVED_REGS)
-/* XXXX - deprecated */
-struct frame_saved_regs
- {
- /* For each register R (except the SP), regs[R] is the address at
- which it was saved on entry to the frame, or zero if it was not
- saved on entry to this frame. This includes special registers
- such as pc and fp saved in special ways in the stack frame.
-
- regs[SP_REGNUM] is different. It holds the actual SP, not the
- address at which it was saved. */
-
- CORE_ADDR regs[NUM_REGS];
- };
-#endif
+/* The following is the intended naming schema for frame functions.
+ It isn't 100% consistent, but it is aproaching that. Frame naming
+ schema:
-/* We keep a cache of stack frames, each of which is a "struct
- frame_info". The innermost one gets allocated (in
- wait_for_inferior) each time the inferior stops; current_frame
- points to it. Additional frames get allocated (in
- get_prev_frame) as needed, and are chained through the next
- and prev fields. Any time that the frame cache becomes invalid
- (most notably when we execute something, but also if we change how
- we interpret the frames (e.g. "set heuristic-fence-post" in
- mips-tdep.c, or anything which reads new symbols)), we should call
- reinit_frame_cache. */
-
-struct frame_info
- {
- /* Nominal address of the frame described. See comments at FRAME_FP
- about what this means outside the *FRAME* macros; in the *FRAME*
- macros, it can mean whatever makes most sense for this machine. */
- CORE_ADDR frame;
-
- /* Address at which execution is occurring in this frame.
- For the innermost frame, it's the current pc.
- For other frames, it is a pc saved in the next frame. */
- CORE_ADDR pc;
-
- /* Level of this frame. The inner-most (youngest) frame is at
- level 0. As you move towards the outer-most (oldest) frame,
- the level increases. This is a cached value. It could just as
- easily be computed by counting back from the selected frame to
- the inner most frame. */
- /* NOTE: cagney/2002-04-05: Perhaphs a level of ``-1'' should be
- reserved to indicate a bogus frame - one that has been created
- just to keep GDB happy (GDB always needs a frame). For the
- moment leave this as speculation. */
- int level;
-
- /* Nonzero if this is a frame associated with calling a signal handler.
-
- Set by machine-dependent code. On some machines, if
- the machine-dependent code fails to check for this, the backtrace
- will look relatively normal. For example, on the i386
- #3 0x158728 in sighold ()
- On other machines (e.g. rs6000), the machine-dependent code better
- set this to prevent us from trying to print it like a normal frame. */
- int signal_handler_caller;
-
- /* For each register, address of where it was saved on entry to
- the frame, or zero if it was not saved on entry to this frame.
- This includes special registers such as pc and fp saved in
- special ways in the stack frame. The SP_REGNUM is even more
- special, the address here is the sp for the previous frame, not
- the address where the sp was saved. */
- /* Allocated by frame_saved_regs_zalloc () which is called /
- initialized by FRAME_INIT_SAVED_REGS(). */
- CORE_ADDR *saved_regs; /*NUM_REGS + NUM_PSEUDO_REGS*/
-
-#ifdef EXTRA_FRAME_INFO
- /* XXXX - deprecated */
- /* Anything extra for this structure that may have been defined
- in the machine dependent files. */
- EXTRA_FRAME_INFO
-#endif
+ Prefixes:
+
+ get_frame_WHAT...(): Get WHAT from the THIS frame (functionaly
+ equivalent to THIS->next->unwind->what)
+
+ frame_unwind_WHAT...(): Unwind THIS frame's WHAT from the NEXT
+ frame.
+
+ put_frame_WHAT...(): Put a value into this frame (unsafe, need to
+ invalidate the frame / regcache afterwards) (better name more
+ strongly hinting at its unsafeness)
+
+ safe_....(): Safer version of various functions, doesn't throw an
+ error (leave this for later?). Returns non-zero if the fetch
+ succeeds. Return a freshly allocated error message?
+
+ Suffixes:
+
+ void /frame/_WHAT(): Read WHAT's value into the buffer parameter.
+
+ ULONGEST /frame/_WHAT_unsigned(): Return an unsigned value (the
+ alternative is *frame_unsigned_WHAT).
+
+ LONGEST /frame/_WHAT_signed(): Return WHAT signed value.
+
+ What:
+
+ /frame/_memory* (frame, coreaddr, len [, buf]): Extract/return
+ *memory.
+
+ /frame/_register* (frame, regnum [, buf]): extract/return register.
+
+ CORE_ADDR /frame/_{pc,sp,...} (frame): Resume address, innner most
+ stack *address, ...
+
+ */
+
+struct symtab_and_line;
+struct frame_unwind;
+struct frame_base;
+struct block;
+struct gdbarch;
+struct ui_file;
+
+/* A legacy unwinder to prop up architectures using the old style
+ saved regs array. */
+extern const struct frame_unwind *legacy_saved_regs_unwind;
+
+/* The frame object. */
+
+struct frame_info;
+
+/* The frame object's ID. This provides a per-frame unique identifier
+ that can be used to relocate a `struct frame_info' after a target
+ resume or a frame cache destruct. It of course assumes that the
+ inferior hasn't unwound the stack past that frame. */
+
+struct frame_id
+{
+ /* The frame's stack address. This shall be constant through out
+ the lifetime of a frame. Note that this requirement applies to
+ not just the function body, but also the prologue and (in theory
+ at least) the epilogue. Since that value needs to fall either on
+ the boundary, or within the frame's address range, the frame's
+ outer-most address (the inner-most address of the previous frame)
+ is used. Watch out for all the legacy targets that still use the
+ function pointer register or stack pointer register. They are
+ wrong. */
+ CORE_ADDR stack_addr;
+ /* The frame's code address. This shall be constant through out the
+ lifetime of the frame. While the PC (a.k.a. resume address)
+ changes as the function is executed, this code address cannot.
+ Typically, it is set to the address of the entry point of the
+ frame's function (as returned by frame_func_unwind(). */
+ CORE_ADDR code_addr;
+ /* The frame's special address. This shall be constant through out the
+ lifetime of the frame. This is used for architectures that may have
+ frames that do not change the stack but are still distinct and have
+ some form of distinct identifier (e.g. the ia64 which uses a 2nd
+ stack for registers). This field is treated as unordered - i.e. will
+ not be used in frame ordering comparisons such as frame_id_inner().
+ A zero in this field will be treated as a wild-card when comparing
+ frames for equality. */
+ CORE_ADDR special_addr;
+};
+
+/* Methods for constructing and comparing Frame IDs.
+
+ NOTE: Given stackless functions A and B, where A calls B (and hence
+ B is inner-to A). The relationships: !eq(A,B); !eq(B,A);
+ !inner(A,B); !inner(B,A); all hold.
+
+ This is because, while B is inner-to A, B is not strictly inner-to A.
+ Being stackless, they have an identical .stack_addr value, and differ
+ only by their unordered .code_addr and/or .special_addr values.
+
+ Because frame_id_inner is only used as a safety net (e.g.,
+ detect a corrupt stack) the lack of strictness is not a problem.
+ Code needing to determine an exact relationship between two frames
+ must instead use frame_id_eq and frame_id_unwind. For instance,
+ in the above, to determine that A stepped-into B, the equation
+ "A.id != B.id && A.id == id_unwind (B)" can be used. */
+
+/* For convenience. All fields are zero. */
+extern const struct frame_id null_frame_id;
+
+/* Construct a frame ID. The first parameter is the frame's constant
+ stack address (typically the outer-bound), and the second the
+ frame's constant code address (typically the entry point) (or zero,
+ to indicate a wild card). The special identifier address is
+ defaulted to zero. */
+extern struct frame_id frame_id_build (CORE_ADDR stack_addr,
+ CORE_ADDR code_addr);
+
+/* Construct a special frame ID. The first parameter is the frame's constant
+ stack address (typically the outer-bound), the second is the
+ frame's constant code address (typically the entry point) (or zero,
+ to indicate a wild card), and the third parameter is the frame's
+ special identifier address (or zero to indicate a wild card or
+ unused default). */
+extern struct frame_id frame_id_build_special (CORE_ADDR stack_addr,
+ CORE_ADDR code_addr,
+ CORE_ADDR special_addr);
+
+/* Returns non-zero when L is a valid frame (a valid frame has a
+ non-zero .base). */
+extern int frame_id_p (struct frame_id l);
+
+/* Returns non-zero when L and R identify the same frame, or, if
+ either L or R have a zero .func, then the same frame base. */
+extern int frame_id_eq (struct frame_id l, struct frame_id r);
+
+/* Returns non-zero when L is strictly inner-than R (they have
+ different frame .bases). Neither L, nor R can be `null'. See note
+ above about frameless functions. */
+extern int frame_id_inner (struct frame_id l, struct frame_id r);
+
+/* Write the internal representation of a frame ID on the specified
+ stream. */
+extern void fprint_frame_id (struct ui_file *file, struct frame_id id);
+
+
+/* For every stopped thread, GDB tracks two frames: current and
+ selected. Current frame is the inner most frame of the selected
+ thread. Selected frame is the one being examined by the the GDB
+ CLI (selected using `up', `down', ...). The frames are created
+ on-demand (via get_prev_frame()) and then held in a frame cache. */
+/* FIXME: cagney/2002-11-28: Er, there is a lie here. If you do the
+ sequence: `thread 1; up; thread 2; thread 1' you loose thread 1's
+ selected frame. At present GDB only tracks the selected frame of
+ the current thread. But be warned, that might change. */
+/* FIXME: cagney/2002-11-14: At any time, only one thread's selected
+ and current frame can be active. Switching threads causes gdb to
+ discard all that cached frame information. Ulgh! Instead, current
+ and selected frame should be bound to a thread. */
+
+/* On demand, create the inner most frame using information found in
+ the inferior. If the inner most frame can't be created, throw an
+ error. */
+extern struct frame_info *get_current_frame (void);
+
+/* Invalidates the frame cache (this function should have been called
+ invalidate_cached_frames).
+
+ FIXME: cagney/2002-11-28: The only difference between
+ flush_cached_frames() and reinit_frame_cache() is that the latter
+ explicitly sets the selected frame back to the current frame there
+ isn't any real difference (except that one delays the selection of
+ a new frame). Code can instead simply rely on get_selected_frame()
+ to reinit's the selected frame as needed. As for invalidating the
+ cache, there should be two methods one that reverts the thread's
+ selected frame back to current frame (for when the inferior
+ resumes) and one that does not (for when the user modifies the
+ target invalidating the frame cache). */
+extern void flush_cached_frames (void);
+extern void reinit_frame_cache (void);
+
+/* On demand, create the selected frame and then return it. If the
+ selected frame can not be created, this function throws an error. */
+/* FIXME: cagney/2002-11-28: At present, when there is no selected
+ frame, this function always returns the current (inner most) frame.
+ It should instead, when a thread has previously had its frame
+ selected (but not resumed) and the frame cache invalidated, find
+ and then return that thread's previously selected frame. */
+extern struct frame_info *get_selected_frame (void);
+
+/* Select a specific frame. NULL, apparently implies re-select the
+ inner most frame. */
+extern void select_frame (struct frame_info *);
+
+/* Given a FRAME, return the next (more inner, younger) or previous
+ (more outer, older) frame. */
+extern struct frame_info *get_prev_frame (struct frame_info *);
+extern struct frame_info *get_next_frame (struct frame_info *);
+
+/* Given a frame's ID, relocate the frame. Returns NULL if the frame
+ is not found. */
+extern struct frame_info *frame_find_by_id (struct frame_id id);
+
+/* Base attributes of a frame: */
+
+/* The frame's `resume' address. Where the program will resume in
+ this frame.
+
+ This replaced: frame->pc; */
+extern CORE_ADDR get_frame_pc (struct frame_info *);
+
+/* An address (not necessarily alligned to an instruction boundary)
+ that falls within THIS frame's code block.
+
+ When a function call is the last statement in a block, the return
+ address for the call may land at the start of the next block.
+ Similarly, if a no-return function call is the last statement in
+ the function, the return address may end up pointing beyond the
+ function, and possibly at the start of the next function.
+
+ These methods make an allowance for this. For call frames, this
+ function returns the frame's PC-1 which "should" be an address in
+ the frame's block. */
+
+extern CORE_ADDR get_frame_address_in_block (struct frame_info *this_frame);
+extern CORE_ADDR frame_unwind_address_in_block (struct frame_info *next_frame);
+
+/* The frame's inner-most bound. AKA the stack-pointer. Confusingly
+ known as top-of-stack. */
+
+extern CORE_ADDR get_frame_sp (struct frame_info *);
+extern CORE_ADDR frame_sp_unwind (struct frame_info *);
+
+
+/* Following on from the `resume' address. Return the entry point
+ address of the function containing that resume address, or zero if
+ that function isn't known. */
+extern CORE_ADDR frame_func_unwind (struct frame_info *fi);
+extern CORE_ADDR get_frame_func (struct frame_info *fi);
+
+/* Closely related to the resume address, various symbol table
+ attributes that are determined by the PC. Note that for a normal
+ frame, the PC refers to the resume address after the return, and
+ not the call instruction. In such a case, the address is adjusted
+ so that it (approximatly) identifies the call site (and not return
+ site).
+
+ NOTE: cagney/2002-11-28: The frame cache could be used to cache the
+ computed value. Working on the assumption that the bottle-neck is
+ in the single step code, and that code causes the frame cache to be
+ constantly flushed, caching things in a frame is probably of little
+ benefit. As they say `show us the numbers'.
+
+ NOTE: cagney/2002-11-28: Plenty more where this one came from:
+ find_frame_block(), find_frame_partial_function(),
+ find_frame_symtab(), find_frame_function(). Each will need to be
+ carefully considered to determine if the real intent was for it to
+ apply to the PC or the adjusted PC. */
+extern void find_frame_sal (struct frame_info *frame,
+ struct symtab_and_line *sal);
+
+/* Return the frame base (what ever that is) (DEPRECATED).
+
+ Old code was trying to use this single method for two conflicting
+ purposes. Such code needs to be updated to use either of:
+
+ get_frame_id: A low level frame unique identifier, that consists of
+ both a stack and a function address, that can be used to uniquely
+ identify a frame. This value is determined by the frame's
+ low-level unwinder, the stack part [typically] being the
+ top-of-stack of the previous frame, and the function part being the
+ function's start address. Since the correct identification of a
+ frameless function requires both the a stack and function address,
+ the old get_frame_base method was not sufficient.
+
+ get_frame_base_address: get_frame_locals_address:
+ get_frame_args_address: A set of high-level debug-info dependant
+ addresses that fall within the frame. These addresses almost
+ certainly will not match the stack address part of a frame ID (as
+ returned by get_frame_base).
+
+ This replaced: frame->frame; */
+
+extern CORE_ADDR get_frame_base (struct frame_info *);
+
+/* Return the per-frame unique identifer. Can be used to relocate a
+ frame after a frame cache flush (and other similar operations). If
+ FI is NULL, return the null_frame_id. */
+extern struct frame_id get_frame_id (struct frame_info *fi);
+
+/* Assuming that a frame is `normal', return its base-address, or 0 if
+ the information isn't available. NOTE: This address is really only
+ meaningful to the frame's high-level debug info. */
+extern CORE_ADDR get_frame_base_address (struct frame_info *);
+
+/* Assuming that a frame is `normal', return the base-address of the
+ local variables, or 0 if the information isn't available. NOTE:
+ This address is really only meaningful to the frame's high-level
+ debug info. Typically, the argument and locals share a single
+ base-address. */
+extern CORE_ADDR get_frame_locals_address (struct frame_info *);
+
+/* Assuming that a frame is `normal', return the base-address of the
+ parameter list, or 0 if that information isn't available. NOTE:
+ This address is really only meaningful to the frame's high-level
+ debug info. Typically, the argument and locals share a single
+ base-address. */
+extern CORE_ADDR get_frame_args_address (struct frame_info *);
+
+/* The frame's level: 0 for innermost, 1 for its caller, ...; or -1
+ for an invalid frame). */
+extern int frame_relative_level (struct frame_info *fi);
+
+/* Return the frame's type. Some are real, some are signal
+ trampolines, and some are completely artificial (dummy). */
+
+enum frame_type
+{
+ /* The frame's type hasn't yet been defined. This is a catch-all
+ for legacy code that uses really strange technicques, such as
+ deprecated_set_frame_type, to set the frame's type. New code
+ should not use this value. */
+ UNKNOWN_FRAME,
+ /* A true stack frame, created by the target program during normal
+ execution. */
+ NORMAL_FRAME,
+ /* A fake frame, created by GDB when performing an inferior function
+ call. */
+ DUMMY_FRAME,
+ /* In a signal handler, various OSs handle this in various ways.
+ The main thing is that the frame may be far from normal. */
+ SIGTRAMP_FRAME
+};
+extern enum frame_type get_frame_type (struct frame_info *);
+
+/* FIXME: cagney/2002-11-10: Some targets want to directly mark a
+ frame as being of a specific type. This shouldn't be necessary.
+ PC_IN_SIGTRAMP() indicates a SIGTRAMP_FRAME and
+ DEPRECATED_PC_IN_CALL_DUMMY() indicates a DUMMY_FRAME. I suspect
+ the real problem here is that get_prev_frame() only sets
+ initialized after DEPRECATED_INIT_EXTRA_FRAME_INFO as been called.
+ Consequently, some targets found that the frame's type was wrong
+ and tried to fix it. The correct fix is to modify get_prev_frame()
+ so that it initializes the frame's type before calling any other
+ functions. */
+extern void deprecated_set_frame_type (struct frame_info *,
+ enum frame_type type);
+
+/* Unwind the stack frame so that the value of REGNUM, in the previous
+ (up, older) frame is returned. If VALUEP is NULL, don't
+ fetch/compute the value. Instead just return the location of the
+ value. */
+extern void frame_register_unwind (struct frame_info *frame, int regnum,
+ int *optimizedp, enum lval_type *lvalp,
+ CORE_ADDR *addrp, int *realnump,
+ void *valuep);
+
+/* Fetch a register from this, or unwind a register from the next
+ frame. Note that the get_frame methods are wrappers to
+ frame->next->unwind. They all [potentially] throw an error if the
+ fetch fails. */
+
+extern void frame_unwind_register (struct frame_info *frame,
+ int regnum, void *buf);
+extern void get_frame_register (struct frame_info *frame,
+ int regnum, void *buf);
+
+extern LONGEST frame_unwind_register_signed (struct frame_info *frame,
+ int regnum);
+extern LONGEST get_frame_register_signed (struct frame_info *frame,
+ int regnum);
+extern ULONGEST frame_unwind_register_unsigned (struct frame_info *frame,
+ int regnum);
+extern ULONGEST get_frame_register_unsigned (struct frame_info *frame,
+ int regnum);
+
+
+/* Use frame_unwind_register_signed. */
+extern void frame_unwind_unsigned_register (struct frame_info *frame,
+ int regnum, ULONGEST *val);
+
+/* Get the value of the register that belongs to this FRAME. This
+ function is a wrapper to the call sequence ``frame_unwind_register
+ (get_next_frame (FRAME))''. As per frame_register_unwind(), if
+ VALUEP is NULL, the registers value is not fetched/computed. */
+
+extern void frame_register (struct frame_info *frame, int regnum,
+ int *optimizedp, enum lval_type *lvalp,
+ CORE_ADDR *addrp, int *realnump,
+ void *valuep);
+
+/* The reverse. Store a register value relative to the specified
+ frame. Note: this call makes the frame's state undefined. The
+ register and frame caches must be flushed. */
+extern void put_frame_register (struct frame_info *frame, int regnum,
+ const void *buf);
+
+/* Map between a frame register number and its name. A frame register
+ space is a superset of the cooked register space --- it also
+ includes builtin registers. If NAMELEN is negative, use the NAME's
+ length when doing the comparison. */
+
+extern int frame_map_name_to_regnum (struct frame_info *frame,
+ const char *name, int namelen);
+extern const char *frame_map_regnum_to_name (struct frame_info *frame,
+ int regnum);
+
+/* Unwind the PC. Strictly speaking return the resume address of the
+ calling frame. For GDB, `pc' is the resume address and not a
+ specific register. */
+
+extern CORE_ADDR frame_pc_unwind (struct frame_info *frame);
+
+/* Discard the specified frame. Restoring the registers to the state
+ of the caller. */
+extern void frame_pop (struct frame_info *frame);
+
+/* Return memory from the specified frame. A frame knows its thread /
+ LWP and hence can find its way down to a target. The assumption
+ here is that the current and previous frame share a common address
+ space.
+
+ If the memory read fails, these methods throw an error.
+
+ NOTE: cagney/2003-06-03: Should there be unwind versions of these
+ methods? That isn't clear. Can code, for instance, assume that
+ this and the previous frame's memory or architecture are identical?
+ If architecture / memory changes are always separated by special
+ adaptor frames this should be ok. */
+
+extern void get_frame_memory (struct frame_info *this_frame, CORE_ADDR addr,
+ void *buf, int len);
+extern LONGEST get_frame_memory_signed (struct frame_info *this_frame,
+ CORE_ADDR memaddr, int len);
+extern ULONGEST get_frame_memory_unsigned (struct frame_info *this_frame,
+ CORE_ADDR memaddr, int len);
+
+/* Return this frame's architecture. */
+
+extern struct gdbarch *get_frame_arch (struct frame_info *this_frame);
- /* Anything extra for this structure that may have been defined
- in the machine dependent files. */
- /* Allocated by frame_obstack_alloc () which is called /
- initialized by INIT_EXTRA_FRAME_INFO */
- struct frame_extra_info *extra_info;
-
- /* If dwarf2 unwind frame informations is used, this structure holds all
- related unwind data. */
- struct context *context;
-
- /* See description above. Return the register value for the
- previous frame. */
- frame_register_unwind_ftype *register_unwind;
- void *register_unwind_cache;
-
- /* Pointers to the next (down, inner) and previous (up, outer)
- frame_info's in the frame cache. */
- struct frame_info *next; /* down, inner */
- struct frame_info *prev; /* up, outer */
- };
/* Values for the source flag to be used in print_frame_info_base(). */
enum print_what
#define SIZEOF_FRAME_SAVED_REGS \
(sizeof (CORE_ADDR) * (NUM_REGS+NUM_PSEUDO_REGS))
-extern void *frame_obstack_alloc (unsigned long size);
-extern void frame_saved_regs_zalloc (struct frame_info *);
+/* Allocate zero initialized memory from the frame cache obstack.
+ Appendices to the frame info (such as the unwind cache) should
+ allocate memory using this method. */
-/* Return the frame address from FI. Except in the machine-dependent
- *FRAME* macros, a frame address has no defined meaning other than
- as a magic cookie which identifies a frame over calls to the
- inferior. The only known exception is inferior.h
- (PC_IN_CALL_DUMMY) [ON_STACK]; see comments there. You cannot
- assume that a frame address contains enough information to
- reconstruct the frame; if you want more than just to identify the
- frame (e.g. be able to fetch variables relative to that frame),
- then save the whole struct frame_info (and the next struct
- frame_info, since the latter is used for fetching variables on some
- machines). */
+extern void *frame_obstack_zalloc (unsigned long size);
+#define FRAME_OBSTACK_ZALLOC(TYPE) ((TYPE *) frame_obstack_zalloc (sizeof (TYPE)))
+#define FRAME_OBSTACK_CALLOC(NUMBER,TYPE) ((TYPE *) frame_obstack_zalloc ((NUMBER) * sizeof (TYPE)))
-#define FRAME_FP(fi) ((fi)->frame)
+/* If legacy_frame_chain_valid() returns zero it means that the given
+ frame is the outermost one and has no caller.
-/* Level of the frame: 0 for innermost, 1 for its caller, ...; or -1
- for an invalid frame. */
+ This method has been superseeded by the per-architecture
+ frame_unwind_pc() (returns 0 to indicate an invalid return address)
+ and per-frame this_id() (returns a NULL frame ID to indicate an
+ invalid frame). */
+extern int legacy_frame_chain_valid (CORE_ADDR, struct frame_info *);
-extern int frame_relative_level (struct frame_info *fi);
+extern void generic_save_dummy_frame_tos (CORE_ADDR sp);
-/* Define a default FRAME_CHAIN_VALID, in the form that is suitable for most
- targets. If FRAME_CHAIN_VALID returns zero it means that the given frame
- is the outermost one and has no caller.
+extern struct block *get_frame_block (struct frame_info *,
+ CORE_ADDR *addr_in_block);
- XXXX - both default and alternate frame_chain_valid functions are
- deprecated. New code should use dummy frames and one of the
- generic functions. */
+/* Return the `struct block' that belongs to the selected thread's
+ selected frame. If the inferior has no state, return NULL.
-extern int file_frame_chain_valid (CORE_ADDR, struct frame_info *);
-extern int func_frame_chain_valid (CORE_ADDR, struct frame_info *);
-extern int nonnull_frame_chain_valid (CORE_ADDR, struct frame_info *);
-extern int generic_file_frame_chain_valid (CORE_ADDR, struct frame_info *);
-extern int generic_func_frame_chain_valid (CORE_ADDR, struct frame_info *);
-extern void generic_save_dummy_frame_tos (CORE_ADDR sp);
+ NOTE: cagney/2002-11-29:
-/* The stack frame that the user has specified for commands to act on.
- Note that one cannot assume this is the address of valid data. */
+ No state? Does the inferior have any execution state (a core file
+ does, an executable does not). At present the code tests
+ `target_has_stack' but I'm left wondering if it should test
+ `target_has_registers' or, even, a merged target_has_state.
-extern struct frame_info *selected_frame;
+ Should it look at the most recently specified SAL? If the target
+ has no state, should this function try to extract a block from the
+ most recently selected SAL? That way `list foo' would give it some
+ sort of reference point. Then again, perhaphs that would confuse
+ things.
-/* Level of the selected frame:
- 0 for innermost, 1 for its caller, ...
- or -1 for frame specified by address with no defined level. */
+ Calls to this function can be broken down into two categories: Code
+ that uses the selected block as an additional, but optional, data
+ point; Code that uses the selected block as a prop, when it should
+ have the relevant frame/block/pc explicitly passed in.
-extern struct frame_info *create_new_frame (CORE_ADDR, CORE_ADDR);
+ The latter can be eliminated by correctly parameterizing the code,
+ the former though is more interesting. Per the "address" command,
+ it occures in the CLI code and makes it possible for commands to
+ work, even when the inferior has no state. */
-extern void flush_cached_frames (void);
+extern struct block *get_selected_block (CORE_ADDR *addr_in_block);
-extern void reinit_frame_cache (void);
+extern struct symbol *get_frame_function (struct frame_info *);
+extern CORE_ADDR get_pc_function_start (CORE_ADDR);
-#ifdef FRAME_FIND_SAVED_REGS
-/* XXX - deprecated */
-#define FRAME_INIT_SAVED_REGS(FI) get_frame_saved_regs (FI, NULL)
-extern void get_frame_saved_regs (struct frame_info *,
- struct frame_saved_regs *);
-#endif
+extern int legacy_frameless_look_for_prologue (struct frame_info *);
-extern void set_current_frame (struct frame_info *);
+extern struct frame_info *find_relative_frame (struct frame_info *, int *);
-extern struct frame_info *get_prev_frame (struct frame_info *);
+extern void show_and_print_stack_frame (struct frame_info *fi, int level,
+ int source);
-extern struct frame_info *get_current_frame (void);
+extern void print_stack_frame (struct frame_info *, int, int);
-extern struct frame_info *get_next_frame (struct frame_info *);
+extern void show_stack_frame (struct frame_info *);
-extern struct block *get_frame_block (struct frame_info *,
- CORE_ADDR *addr_in_block);
+extern void print_frame_info (struct frame_info *, int, int, int);
-extern struct block *get_current_block (CORE_ADDR *addr_in_block);
+extern void show_frame_info (struct frame_info *, int, int, int);
-extern struct block *get_selected_block (CORE_ADDR *addr_in_block);
+extern struct frame_info *block_innermost_frame (struct block *);
-extern struct symbol *get_frame_function (struct frame_info *);
+/* NOTE: cagney/2002-09-13: There is no need for this function. */
+extern CORE_ADDR deprecated_read_register_dummy (CORE_ADDR pc,
+ CORE_ADDR fp, int);
+extern void generic_push_dummy_frame (void);
+extern void generic_pop_current_frame (void (*)(struct frame_info *));
+extern void generic_pop_dummy_frame (void);
-extern CORE_ADDR get_frame_pc (struct frame_info *);
+extern int generic_pc_in_call_dummy (CORE_ADDR pc,
+ CORE_ADDR sp, CORE_ADDR fp);
-extern CORE_ADDR get_pc_function_start (CORE_ADDR);
+/* NOTE: cagney/2002-06-26: Targets should no longer use this
+ function. Instead, the contents of a dummy frames registers can be
+ obtained by applying: frame_register_unwind to the dummy frame; or
+ frame_register_unwind() to the next outer frame. */
-extern struct block *block_for_pc (CORE_ADDR);
+extern char *deprecated_generic_find_dummy_frame (CORE_ADDR pc, CORE_ADDR fp);
-extern struct block *block_for_pc_sect (CORE_ADDR, asection *);
-extern int frameless_look_for_prologue (struct frame_info *);
+/* The DEPRECATED_GET_SAVED_REGISTER architecture interface is
+ entirely redundant. New architectures should implement per-frame
+ unwinders (ref "frame-unwind.h"). */
+extern void deprecated_generic_get_saved_register (char *, int *, CORE_ADDR *,
+ struct frame_info *, int,
+ enum lval_type *);
-extern void print_frame_args (struct symbol *, struct frame_info *,
- int, struct ui_file *);
+extern void generic_save_call_dummy_addr (CORE_ADDR lo, CORE_ADDR hi);
-extern struct frame_info *find_relative_frame (struct frame_info *, int *);
+/* FIXME: cagney/2003-02-02: Should be deprecated or replaced with a
+ function called get_frame_register_p(). This slightly weird (and
+ older) variant of get_frame_register() returns zero (indicating the
+ register is unavailable) if either: the register isn't cached; or
+ the register has been optimized out. Problem is, neither check is
+ exactly correct. A register can't be optimized out (it may not
+ have been saved as part of a function call); The fact that a
+ register isn't in the register cache doesn't mean that the register
+ isn't available (it could have been fetched from memory). */
-extern void show_and_print_stack_frame (struct frame_info *fi, int level,
- int source);
+extern int frame_register_read (struct frame_info *frame, int regnum,
+ void *buf);
-extern void print_stack_frame (struct frame_info *, int, int);
+/* From stack.c. */
+extern void args_info (char *, int);
-extern void print_only_stack_frame (struct frame_info *, int, int);
+extern void locals_info (char *, int);
-extern void show_stack_frame (struct frame_info *);
+extern void (*selected_frame_level_changed_hook) (int);
-extern void select_frame (struct frame_info *);
+extern void return_command (char *, int);
-/* Return an ID that can be used to re-find a frame. */
-struct frame_id
-{
- /* The frame's address. This should be constant through out the
- lifetime of a frame. */
- CORE_ADDR base;
- /* The frame's current PC. While this changes, the function that
- the PC falls into, does not. */
- CORE_ADDR pc;
-};
+/* NOTE: cagney/2002-11-27:
-extern void get_frame_id (struct frame_info *fi, struct frame_id *id);
+ You might think that the below global can simply be replaced by a
+ call to either get_selected_frame() or select_frame().
-extern struct frame_info *frame_find_by_id (struct frame_id id);
+ Unfortunately, it isn't that easy.
-extern void print_frame_info (struct frame_info *, int, int, int);
+ The relevant code needs to be audited to determine if it is
+ possible (or pratical) to instead pass the applicable frame in as a
+ parameter. For instance, DEPRECATED_DO_REGISTERS_INFO() relied on
+ the deprecated_selected_frame global, while its replacement,
+ PRINT_REGISTERS_INFO(), is parameterized with the selected frame.
+ The only real exceptions occure at the edge (in the CLI code) where
+ user commands need to pick up the selected frame before proceeding.
-extern void show_frame_info (struct frame_info *, int, int, int);
+ This is important. GDB is trying to stamp out the hack:
-extern CORE_ADDR find_saved_register (struct frame_info *, int);
+ saved_frame = deprecated_selected_frame;
+ deprecated_selected_frame = ...;
+ hack_using_global_selected_frame ();
+ deprecated_selected_frame = saved_frame;
-extern struct frame_info *block_innermost_frame (struct block *);
+ Take care! */
-extern struct frame_info *find_frame_addr_in_frame_chain (CORE_ADDR);
+extern struct frame_info *deprecated_selected_frame;
-extern CORE_ADDR sigtramp_saved_pc (struct frame_info *);
+/* NOTE: drow/2003-09-06:
-extern CORE_ADDR generic_read_register_dummy (CORE_ADDR pc,
- CORE_ADDR fp, int);
-extern void generic_push_dummy_frame (void);
-extern void generic_pop_current_frame (void (*)(struct frame_info *));
-extern void generic_pop_dummy_frame (void);
+ This function is "a step sideways" for uses of deprecated_selected_frame.
+ They should be fixed as above, but meanwhile, we needed a solution for
+ cases where functions are called with a NULL frame meaning either "the
+ program is not running" or "use the selected frame". Lazy building of
+ deprecated_selected_frame confuses the situation, because now
+ deprecated_selected_frame can be NULL even when the inferior is running.
-extern int generic_pc_in_call_dummy (CORE_ADDR pc,
- CORE_ADDR sp, CORE_ADDR fp);
+ This function calls get_selected_frame if the inferior should have a
+ frame, or returns NULL otherwise. */
-/* NOTE: cagney/2002-06-26: Targets should no longer use this
- function. Instead, the contents of a dummy frames registers can be
- obtained by applying: frame_register_unwind to the dummy frame; or
- get_saved_register to the next outer frame. */
+extern struct frame_info *deprecated_safe_get_selected_frame (void);
-extern char *deprecated_generic_find_dummy_frame (CORE_ADDR pc, CORE_ADDR fp);
+/* Create a frame using the specified BASE and PC. */
-extern void generic_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun,
- int nargs, struct value **args,
- struct type *type, int gcc_p);
+extern struct frame_info *create_new_frame (CORE_ADDR base, CORE_ADDR pc);
-extern void generic_get_saved_register (char *, int *, CORE_ADDR *,
- struct frame_info *, int,
- enum lval_type *);
-extern void generic_unwind_get_saved_register (char *raw_buffer,
- int *optimized,
- CORE_ADDR * addrp,
- struct frame_info *frame,
- int regnum,
- enum lval_type *lval);
+/* Create/access the frame's `extra info'. The extra info is used by
+ older code to store information such as the analyzed prologue. The
+ zalloc() should only be called by the INIT_EXTRA_INFO method. */
-/* Unwind the stack frame so that the value of REGNUM, in the previous
- frame is returned. If VALUEP is NULL, don't fetch/compute the
- value. Instead just return the location of the value. */
+extern struct frame_extra_info *frame_extra_info_zalloc (struct frame_info *fi,
+ long size);
+extern struct frame_extra_info *get_frame_extra_info (struct frame_info *fi);
-extern void frame_register_unwind (struct frame_info *frame, int regnum,
- int *optimizedp, enum lval_type *lvalp,
- CORE_ADDR *addrp, int *realnump,
- void *valuep);
+/* Create/access the frame's `saved_regs'. The saved regs are used by
+ older code to store the address of each register (except for
+ SP_REGNUM where the value of the register in the previous frame is
+ stored). */
+extern CORE_ADDR *frame_saved_regs_zalloc (struct frame_info *);
+extern CORE_ADDR *deprecated_get_frame_saved_regs (struct frame_info *);
-extern void generic_save_call_dummy_addr (CORE_ADDR lo, CORE_ADDR hi);
+/* FIXME: cagney/2002-12-06: Has the PC in the current frame changed?
+ "infrun.c", Thanks to DECR_PC_AFTER_BREAK, can change the PC after
+ the initial frame create. This puts things back in sync.
-extern void get_saved_register (char *raw_buffer, int *optimized,
- CORE_ADDR * addrp,
- struct frame_info *frame,
- int regnum, enum lval_type *lval);
+ This replaced: frame->pc = ....; */
+extern void deprecated_update_frame_pc_hack (struct frame_info *frame,
+ CORE_ADDR pc);
-/* Return the register as found on the FRAME. Return zero if the
- register could not be found. */
-extern int frame_register_read (struct frame_info *frame, int regnum,
- void *buf);
+/* FIXME: cagney/2002-12-18: Has the frame's base changed? Or to be
+ more exact, was that initial guess at the frame's base as returned
+ by deprecated_read_fp() wrong? If it was, fix it. This shouldn't
+ be necessary since the code should be getting the frame's base
+ correct from the outset.
+
+ This replaced: frame->frame = ....; */
+extern void deprecated_update_frame_base_hack (struct frame_info *frame,
+ CORE_ADDR base);
+
+/* FIXME: cagney/2003-01-05: Allocate a frame, along with the
+ saved_regs and extra_info. Set up cleanups for all three. Same as
+ for deprecated_frame_xmalloc, targets are calling this when
+ creating a scratch `struct frame_info'. The frame overhaul makes
+ this unnecessary since all frame queries are parameterized with a
+ common cache parameter and a frame. */
+extern struct frame_info *deprecated_frame_xmalloc_with_cleanup (long sizeof_saved_regs,
+ long sizeof_extra_info);
+
+/* Return non-zero if the architecture is relying on legacy frame
+ code. */
+extern int legacy_frame_p (struct gdbarch *gdbarch);
#endif /* !defined (FRAME_H) */