/* Definitions for dealing with stack frames, for GDB, the GNU debugger.
- Copyright (C) 1986 Free Software Foundation, Inc.
+ Copyright 1986, 1989, 1991, 1992 Free Software Foundation, Inc.
-GDB is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY. No author or distributor accepts responsibility to anyone
-for the consequences of using it or for whether it serves any
-particular purpose or works at all, unless he says so in writing.
-Refer to the GDB General Public License for full details.
+This file is part of GDB.
-Everyone is granted permission to copy, modify and redistribute GDB,
-but only under the conditions described in the GDB General Public
-License. A copy of this license is supposed to have been given to you
-along with GDB so you can know your rights and responsibilities. It
-should be in a file named COPYING. Among other things, the copyright
-notice and this notice must be preserved on all copies.
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
-In other words, go ahead and share GDB, but don't try to stop
-anyone else from sharing it farther. Help stamp out software hoarding!
-*/
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
-/* Note that frame.h requires param.h! */
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-#define FRAME CORE_ADDR
+#if !defined (FRAME_H)
+#define FRAME_H 1
+
+/* Describe the saved registers of a frame. */
+
+struct frame_saved_regs
+ {
+
+ /* For each register, address of where it was saved on entry to
+ the frame, or zero if it was not saved on entry to this frame.
+ This includes special registers such as pc and fp saved in
+ special ways in the stack frame. The SP_REGNUM is even more
+ special, the address here is the sp for the next frame, not the
+ address where the sp was saved. */
+
+ CORE_ADDR regs[NUM_REGS];
+ };
+
+/* We keep a cache of stack frames, each of which is a "struct
+ frame_info". The innermost one gets allocated (in
+ wait_for_inferior) each time the inferior stops; current_frame
+ points to it. Additional frames get allocated (in
+ get_prev_frame_info) as needed, and are chained through the next
+ and prev fields. Any time that the frame cache becomes invalid
+ (most notably when we execute something, but also if we change how
+ we interpret the frames (e.g. "set heuristic-fence-post" in
+ mips-tdep.c, or anything which reads new symbols)), we should call
+ reinit_frame_cache. */
struct frame_info
{
- /* Nominal address of the frame described. */
- FRAME frame;
+ /* Nominal address of the frame described. See comments at FRAME_FP
+ about what this means outside the *FRAME* macros; in the *FRAME*
+ macros, it can mean whatever makes most sense for this machine. */
+ CORE_ADDR frame;
+
/* Address at which execution is occurring in this frame.
For the innermost frame, it's the current pc.
For other frames, it is a pc saved in the next frame. */
CORE_ADDR pc;
- /* The frame called by the frame we are describing, or 0. */
- FRAME next_frame;
- };
-/* Describe the saved registers of a frame. */
+ /* Nonzero if this is a frame associated with calling a signal handler.
-struct frame_saved_regs
- {
- /* For each register, address of where it was saved on entry to the frame,
- or zero if it was not saved on entry to this frame. */
- CORE_ADDR regs[NUM_REGS];
+ Set by machine-dependent code. On some machines, if
+ the machine-dependent code fails to check for this, the backtrace
+ will look relatively normal. For example, on the i386
+ #3 0x158728 in sighold ()
+ On other machines (e.g. rs6000), the machine-dependent code better
+ set this to prevent us from trying to print it like a normal frame. */
+ int signal_handler_caller;
+
+ /* Anything extra for this structure that may have been defined
+ in the machine dependent files. */
+#ifdef EXTRA_FRAME_INFO
+ EXTRA_FRAME_INFO
+#endif
+
+ /* We should probably also store a "struct frame_saved_regs" here.
+ This is already done by some machines (e.g. config/m88k/tm-m88k.h)
+ but there is no reason it couldn't be general. */
+
+ /* Pointers to the next and previous frame_info's in the frame cache. */
+ struct frame_info *next, *prev;
};
+/* Dummy frame. This saves the processor state just prior to setting up the
+ inferior function call. On most targets, the registers are saved on the
+ target stack, but that really slows down function calls. */
+
+struct dummy_frame
+{
+ struct dummy_frame *next;
+
+ CORE_ADDR pc;
+ CORE_ADDR fp;
+ CORE_ADDR sp;
+ char regs[REGISTER_BYTES];
+};
+
+/* Return the frame address from FR. Except in the machine-dependent
+ *FRAME* macros, a frame address has no defined meaning other than
+ as a magic cookie which identifies a frame over calls to the
+ inferior. The only known exception is inferior.h
+ (PC_IN_CALL_DUMMY) [ON_STACK]; see comments there. You cannot
+ assume that a frame address contains enough information to
+ reconstruct the frame; if you want more than just to identify the
+ frame (e.g. be able to fetch variables relative to that frame),
+ then save the whole struct frame_info (and the next struct
+ frame_info, since the latter is used for fetching variables on some
+ machines). */
+
+#define FRAME_FP(fi) ((fi)->frame)
+
+/* Define a default FRAME_CHAIN_VALID, in the form that is suitable for most
+ targets. If FRAME_CHAIN_VALID returns zero it means that the given frame
+ is the outermost one and has no caller.
+
+ If a particular target needs a different definition, then it can override
+ the definition here by providing one in the tm file. */
+
+#if !defined (FRAME_CHAIN_VALID)
+
+#if defined (FRAME_CHAIN_VALID_ALTERNATE)
+
+/* Use the alternate method of avoiding running up off the end of the frame
+ chain or following frames back into the startup code. See the comments
+ in objfiles.h. */
+
+#define FRAME_CHAIN_VALID(chain, thisframe) \
+ ((chain) != 0 \
+ && !inside_main_func ((thisframe) -> pc) \
+ && !inside_entry_func ((thisframe) -> pc))
+
+#else
+
+#define FRAME_CHAIN_VALID(chain, thisframe) \
+ ((chain) != 0 \
+ && !inside_entry_file (FRAME_SAVED_PC (thisframe)))
+
+#endif /* FRAME_CHAIN_VALID_ALTERNATE */
+
+#endif /* FRAME_CHAIN_VALID */
+
/* The stack frame that the user has specified for commands to act on.
Note that one cannot assume this is the address of valid data. */
-extern FRAME selected_frame;
+extern struct frame_info *selected_frame;
+
+/* Level of the selected frame:
+ 0 for innermost, 1 for its caller, ...
+ or -1 for frame specified by address with no defined level. */
+
+extern int selected_frame_level;
+
+extern struct frame_info *get_prev_frame_info PARAMS ((struct frame_info *));
+
+extern struct frame_info *create_new_frame PARAMS ((CORE_ADDR, CORE_ADDR));
+
+extern void flush_cached_frames PARAMS ((void));
+
+extern void reinit_frame_cache PARAMS ((void));
+
+extern void get_frame_saved_regs PARAMS ((struct frame_info *,
+ struct frame_saved_regs *));
+
+extern void set_current_frame PARAMS ((struct frame_info *));
+
+extern struct frame_info *get_prev_frame PARAMS ((struct frame_info *));
+
+extern struct frame_info *get_current_frame PARAMS ((void));
+
+extern struct frame_info *get_next_frame PARAMS ((struct frame_info *));
+
+extern struct block *get_frame_block PARAMS ((struct frame_info *));
+
+extern struct block *get_current_block PARAMS ((void));
+
+extern struct block *get_selected_block PARAMS ((void));
+
+extern struct symbol *get_frame_function PARAMS ((struct frame_info *));
+
+extern CORE_ADDR get_frame_pc PARAMS ((struct frame_info *));
+
+extern CORE_ADDR get_pc_function_start PARAMS ((CORE_ADDR));
+
+extern struct block * block_for_pc PARAMS ((CORE_ADDR));
+
+extern struct block * block_for_pc_sect PARAMS ((CORE_ADDR, asection *));
+
+extern int frameless_look_for_prologue PARAMS ((struct frame_info *));
+
+extern void print_frame_args PARAMS ((struct symbol *, struct frame_info *,
+ int, GDB_FILE *));
+
+extern struct frame_info *find_relative_frame PARAMS ((struct frame_info *, int*));
+
+extern void print_stack_frame PARAMS ((struct frame_info *, int, int));
+
+extern void select_frame PARAMS ((struct frame_info *, int));
+
+extern void record_selected_frame PARAMS ((CORE_ADDR *, int *));
+
+extern void print_frame_info PARAMS ((struct frame_info *, int, int, int));
+
+extern CORE_ADDR find_saved_register PARAMS ((struct frame_info *, int));
+
+extern struct frame_info *block_innermost_frame PARAMS ((struct block *));
+
+extern struct frame_info *find_frame_addr_in_frame_chain PARAMS ((CORE_ADDR));
+
+extern CORE_ADDR sigtramp_saved_pc PARAMS ((struct frame_info *));
+
+extern int generic_frame_chain_valid PARAMS ((CORE_ADDR,
+ struct frame_info *));
+extern CORE_ADDR generic_read_register_dummy PARAMS ((CORE_ADDR pc,
+ CORE_ADDR fp,
+ int));
+extern void generic_push_dummy_frame PARAMS ((void));
+extern void generic_pop_dummy_frame PARAMS ((void));
-extern struct frame_info get_frame_info ();
-extern struct frame_info get_prev_frame_info ();
+extern int generic_pc_in_call_dummy PARAMS ((CORE_ADDR pc,
+ CORE_ADDR fp));
+extern char * generic_find_dummy_frame PARAMS ((CORE_ADDR pc,
+ CORE_ADDR fp));
-extern void get_frame_saved_regs ();
+#ifdef __GNUC__
+enum lval_type;
+#endif
-extern FRAME get_prev_frame ();
+extern void generic_get_saved_register PARAMS ((char *, int *, CORE_ADDR *, struct frame_info *, int, enum lval_type *));
-extern FRAME get_current_frame ();
-extern struct block *get_frame_block ();
-extern struct block *get_current_block ();
-extern struct block *get_selected_block ();
-extern struct symbol *get_frame_function ();
-extern struct symbol *get_pc_function ();
+#endif /* !defined (FRAME_H) */
projects / deliverable / binutils-gdb.git / blobdiff