/* Definitions for dealing with stack frames, for GDB, the GNU debugger.
- Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+ Copyright (C) 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1996, 1997,
+ 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2007, 2008
+ Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#if !defined (FRAME_H)
#define FRAME_H 1
/* Returns non-zero when L is strictly inner-than R (they have
different frame .bases). Neither L, nor R can be `null'. See note
above about frameless functions. */
-extern int frame_id_inner (struct frame_id l, struct frame_id r);
+extern int frame_id_inner (struct gdbarch *gdbarch, struct frame_id l,
+ struct frame_id r);
/* Write the internal representation of a frame ID on the specified
stream. */
extern void fprint_frame_id (struct ui_file *file, struct frame_id id);
+/* Frame types. Some are real, some are signal trampolines, and some
+ are completely artificial (dummy). */
+
+enum frame_type
+{
+ /* A true stack frame, created by the target program during normal
+ execution. */
+ NORMAL_FRAME,
+ /* A fake frame, created by GDB when performing an inferior function
+ call. */
+ DUMMY_FRAME,
+ /* In a signal handler, various OSs handle this in various ways.
+ The main thing is that the frame may be far from normal. */
+ SIGTRAMP_FRAME,
+ /* Sentinel or registers frame. This frame obtains register values
+ direct from the inferior's registers. */
+ SENTINEL_FRAME
+};
+
/* For every stopped thread, GDB tracks two frames: current and
selected. Current frame is the inner most frame of the selected
thread. Selected frame is the one being examined by the the GDB
/* Invalidates the frame cache (this function should have been called
invalidate_cached_frames).
- FIXME: cagney/2002-11-28: The only difference between
- flush_cached_frames() and reinit_frame_cache() is that the latter
- explicitly sets the selected frame back to the current frame -- there
- isn't any real difference (except that one delays the selection of
- a new frame). Code can instead simply rely on get_selected_frame()
- to reinit the selected frame as needed. As for invalidating the
- cache, there should be two methods: one that reverts the thread's
- selected frame back to current frame (for when the inferior
- resumes) and one that does not (for when the user modifies the
- target invalidating the frame cache). */
-extern void flush_cached_frames (void);
+ FIXME: cagney/2002-11-28: There should be two methods: one that
+ reverts the thread's selected frame back to current frame (for when
+ the inferior resumes) and one that does not (for when the user
+ modifies the target invalidating the frame cache). */
extern void reinit_frame_cache (void);
/* On demand, create the selected frame and then return it. If the
- selected frame can not be created, this function throws an error. */
+ selected frame can not be created, this function prints then throws
+ an error. When MESSAGE is non-NULL, use it for the error message,
+ otherwize use a generic error message. */
/* FIXME: cagney/2002-11-28: At present, when there is no selected
frame, this function always returns the current (inner most) frame.
It should instead, when a thread has previously had its frame
selected (but not resumed) and the frame cache invalidated, find
and then return that thread's previously selected frame. */
-extern struct frame_info *get_selected_frame (void);
+extern struct frame_info *get_selected_frame (const char *message);
/* Select a specific frame. NULL, apparently implies re-select the
inner most frame. */
the frame's block. */
extern CORE_ADDR get_frame_address_in_block (struct frame_info *this_frame);
-extern CORE_ADDR frame_unwind_address_in_block (struct frame_info *next_frame);
+
+/* Similar to get_frame_address_in_block, find an address in the
+ block which logically called NEXT_FRAME, assuming it is a THIS_TYPE
+ frame. */
+
+extern CORE_ADDR frame_unwind_address_in_block (struct frame_info *next_frame,
+ enum frame_type this_type);
/* The frame's inner-most bound. AKA the stack-pointer. Confusingly
known as top-of-stack. */
/* Following on from the `resume' address. Return the entry point
address of the function containing that resume address, or zero if
that function isn't known. */
-extern CORE_ADDR frame_func_unwind (struct frame_info *fi);
extern CORE_ADDR get_frame_func (struct frame_info *fi);
+/* Similar to get_frame_func, find the start of the function which
+ logically called NEXT_FRAME, assuming it is a THIS_TYPE frame. */
+extern CORE_ADDR frame_func_unwind (struct frame_info *next_frame,
+ enum frame_type this_type);
+
/* Closely related to the resume address, various symbol table
attributes that are determined by the PC. Note that for a normal
frame, the PC refers to the resume address after the return, and
extern void find_frame_sal (struct frame_info *frame,
struct symtab_and_line *sal);
+/* Set the current source and line to the location given by frame
+ FRAME, if possible. When CENTER is true, adjust so the relevant
+ line is in the center of the next 'list'. */
+
+void set_current_sal_from_frame (struct frame_info *, int);
+
/* Return the frame base (what ever that is) (DEPRECATED).
Old code was trying to use this single method for two conflicting
for an invalid frame). */
extern int frame_relative_level (struct frame_info *fi);
-/* Return the frame's type. Some are real, some are signal
- trampolines, and some are completely artificial (dummy). */
+/* Return the frame's type. */
-enum frame_type
-{
- /* A true stack frame, created by the target program during normal
- execution. */
- NORMAL_FRAME,
- /* A fake frame, created by GDB when performing an inferior function
- call. */
- DUMMY_FRAME,
- /* In a signal handler, various OSs handle this in various ways.
- The main thing is that the frame may be far from normal. */
- SIGTRAMP_FRAME,
- /* Sentinel or registers frame. This frame obtains register values
- direct from the inferior's registers. */
- SENTINEL_FRAME
-};
extern enum frame_type get_frame_type (struct frame_info *);
+/* For frames where we can not unwind further, describe why. */
+
+enum unwind_stop_reason
+ {
+ /* No particular reason; either we haven't tried unwinding yet,
+ or we didn't fail. */
+ UNWIND_NO_REASON,
+
+ /* The previous frame's analyzer returns an invalid result
+ from this_id.
+
+ FIXME drow/2006-08-16: This is how GDB used to indicate end of
+ stack. We should migrate to a model where frames always have a
+ valid ID, and this becomes not just an error but an internal
+ error. But that's a project for another day. */
+ UNWIND_NULL_ID,
+
+ /* All the conditions after this point are considered errors;
+ abnormal stack termination. If a backtrace stops for one
+ of these reasons, we'll let the user know. This marker
+ is not a valid stop reason. */
+ UNWIND_FIRST_ERROR,
+
+ /* This frame ID looks like it ought to belong to a NEXT frame,
+ but we got it for a PREV frame. Normally, this is a sign of
+ unwinder failure. It could also indicate stack corruption. */
+ UNWIND_INNER_ID,
+
+ /* This frame has the same ID as the previous one. That means
+ that unwinding further would almost certainly give us another
+ frame with exactly the same ID, so break the chain. Normally,
+ this is a sign of unwinder failure. It could also indicate
+ stack corruption. */
+ UNWIND_SAME_ID,
+
+ /* The frame unwinder didn't find any saved PC, but we needed
+ one to unwind further. */
+ UNWIND_NO_SAVED_PC,
+ };
+
+/* Return the reason why we can't unwind past this frame. */
+
+enum unwind_stop_reason get_frame_unwind_stop_reason (struct frame_info *);
+
+/* Translate a reason code to an informative string. */
+
+const char *frame_stop_reason_string (enum unwind_stop_reason);
+
/* Unwind the stack frame so that the value of REGNUM, in the previous
(up, older) frame is returned. If VALUEP is NULL, don't
fetch/compute the value. Instead just return the location of the
extern void frame_register_unwind (struct frame_info *frame, int regnum,
int *optimizedp, enum lval_type *lvalp,
CORE_ADDR *addrp, int *realnump,
- void *valuep);
+ gdb_byte *valuep);
/* Fetch a register from this, or unwind a register from the next
frame. Note that the get_frame methods are wrappers to
fetch fails. */
extern void frame_unwind_register (struct frame_info *frame,
- int regnum, void *buf);
+ int regnum, gdb_byte *buf);
extern void get_frame_register (struct frame_info *frame,
- int regnum, void *buf);
+ int regnum, gdb_byte *buf);
extern LONGEST frame_unwind_register_signed (struct frame_info *frame,
int regnum);
int regnum);
-/* Use frame_unwind_register_signed. */
-extern void frame_unwind_unsigned_register (struct frame_info *frame,
- int regnum, ULONGEST *val);
-
/* Get the value of the register that belongs to this FRAME. This
- function is a wrapper to the call sequence ``frame_unwind_register
+ function is a wrapper to the call sequence ``frame_register_unwind
(get_next_frame (FRAME))''. As per frame_register_unwind(), if
VALUEP is NULL, the registers value is not fetched/computed. */
extern void frame_register (struct frame_info *frame, int regnum,
int *optimizedp, enum lval_type *lvalp,
CORE_ADDR *addrp, int *realnump,
- void *valuep);
+ gdb_byte *valuep);
/* The reverse. Store a register value relative to the specified
frame. Note: this call makes the frame's state undefined. The
register and frame caches must be flushed. */
extern void put_frame_register (struct frame_info *frame, int regnum,
- const void *buf);
+ const gdb_byte *buf);
+
+/* Read LEN bytes from one or multiple registers starting with REGNUM
+ in frame FRAME, starting at OFFSET, into BUF. */
+extern int get_frame_register_bytes (struct frame_info *frame, int regnum,
+ CORE_ADDR offset, int len,
+ gdb_byte *myaddr);
+
+/* Write LEN bytes to one or multiple registers starting with REGNUM
+ in frame FRAME, starting at OFFSET, into BUF. */
+extern void put_frame_register_bytes (struct frame_info *frame, int regnum,
+ CORE_ADDR offset, int len,
+ const gdb_byte *myaddr);
/* Map between a frame register number and its name. A frame register
space is a superset of the cooked register space --- it also
adaptor frames this should be ok. */
extern void get_frame_memory (struct frame_info *this_frame, CORE_ADDR addr,
- void *buf, int len);
+ gdb_byte *buf, int len);
extern LONGEST get_frame_memory_signed (struct frame_info *this_frame,
CORE_ADDR memaddr, int len);
extern ULONGEST get_frame_memory_unsigned (struct frame_info *this_frame,
/* Same as above, but return non-zero when the entire memory read
succeeds, zero otherwize. */
extern int safe_frame_unwind_memory (struct frame_info *this_frame,
- CORE_ADDR addr, void *buf, int len);
+ CORE_ADDR addr, gdb_byte *buf, int len);
/* Return this frame's architecture. */
#error "SIZEOF_FRAME_SAVED_REGS can not be re-defined"
#endif
#define SIZEOF_FRAME_SAVED_REGS \
- (sizeof (CORE_ADDR) * (NUM_REGS+NUM_PSEUDO_REGS))
+ (sizeof (CORE_ADDR) * (gdbarch_num_regs (current_gdbarch)\
+ + gdbarch_num_pseudo_regs (current_gdbarch)))
/* Allocate zero initialized memory from the frame cache obstack.
Appendices to the frame info (such as the unwind cache) should
#define FRAME_OBSTACK_ZALLOC(TYPE) ((TYPE *) frame_obstack_zalloc (sizeof (TYPE)))
#define FRAME_OBSTACK_CALLOC(NUMBER,TYPE) ((TYPE *) frame_obstack_zalloc ((NUMBER) * sizeof (TYPE)))
-extern void generic_save_dummy_frame_tos (CORE_ADDR sp);
+/* Create a regcache, and copy the frame's registers into it. */
+struct regcache *frame_save_as_regcache (struct frame_info *this_frame);
extern struct block *get_frame_block (struct frame_info *,
CORE_ADDR *addr_in_block);
extern CORE_ADDR get_pc_function_start (CORE_ADDR);
-extern int legacy_frameless_look_for_prologue (struct frame_info *);
-
extern struct frame_info *find_relative_frame (struct frame_info *, int *);
extern void show_and_print_stack_frame (struct frame_info *fi, int print_level,
extern struct frame_info *block_innermost_frame (struct block *);
-/* NOTE: cagney/2002-09-13: There is no need for this function. */
-extern CORE_ADDR deprecated_read_register_dummy (CORE_ADDR pc,
- CORE_ADDR fp, int);
-extern void generic_push_dummy_frame (void);
-extern void deprecated_pop_dummy_frame (void);
-
extern int deprecated_pc_in_call_dummy (CORE_ADDR pc);
-/* NOTE: cagney/2002-06-26: Targets should no longer use this
- function. Instead, the contents of a dummy frame register can be
- obtained by applying: frame_register_unwind to the dummy frame; or
- frame_register_unwind() to the next outer frame. */
-
-extern char *deprecated_generic_find_dummy_frame (CORE_ADDR pc, CORE_ADDR fp);
-
-
-extern void generic_save_call_dummy_addr (CORE_ADDR lo, CORE_ADDR hi);
-
/* FIXME: cagney/2003-02-02: Should be deprecated or replaced with a
function called get_frame_register_p(). This slightly weird (and
older) variant of get_frame_register() returns zero (indicating the
isn't available (it could have been fetched from memory). */
extern int frame_register_read (struct frame_info *frame, int regnum,
- void *buf);
+ gdb_byte *buf);
/* From stack.c. */
extern void args_info (char *, int);
extern void return_command (char *, int);
-/* NOTE: cagney/2002-11-27:
+/* Notes (cagney/2002-11-27, drow/2003-09-06):
- You might think that the below global can simply be replaced by a
- call to either get_selected_frame() or select_frame().
+ You might think that calls to this function can simply be replaced by a
+ call to get_selected_frame().
Unfortunately, it isn't that easy.
The only real exceptions occur at the edge (in the CLI code) where
user commands need to pick up the selected frame before proceeding.
+ There are also some functions called with a NULL frame meaning either "the
+ program is not running" or "use the selected frame".
+
This is important. GDB is trying to stamp out the hack:
- saved_frame = deprecated_selected_frame;
- deprecated_selected_frame = ...;
+ saved_frame = deprecated_safe_get_selected_frame ();
+ select_frame (...);
hack_using_global_selected_frame ();
- deprecated_selected_frame = saved_frame;
-
- Take care! */
+ select_frame (saved_frame);
-extern struct frame_info *deprecated_selected_frame;
-
-/* NOTE: drow/2003-09-06:
-
- This function is "a step sideways" for uses of deprecated_selected_frame.
- They should be fixed as above, but meanwhile, we needed a solution for
- cases where functions are called with a NULL frame meaning either "the
- program is not running" or "use the selected frame". Lazy building of
- deprecated_selected_frame confuses the situation, because now
- deprecated_selected_frame can be NULL even when the inferior is running.
+ Take care!
This function calls get_selected_frame if the inferior should have a
frame, or returns NULL otherwise. */
extern struct frame_info *create_new_frame (CORE_ADDR base, CORE_ADDR pc);
-
-/* Create/access the frame's `extra info'. The extra info is used by
- older code to store information such as the analyzed prologue. The
- zalloc() should only be called by the INIT_EXTRA_INFO method. */
-
-extern struct frame_extra_info *frame_extra_info_zalloc (struct frame_info *fi,
- long size);
-extern struct frame_extra_info *get_frame_extra_info (struct frame_info *fi);
-
-/* Create/access the frame's `saved_regs'. The saved regs are used by
- older code to store the address of each register (except for
- SP_REGNUM where the value of the register in the previous frame is
- stored). */
-extern CORE_ADDR *frame_saved_regs_zalloc (struct frame_info *);
-extern CORE_ADDR *deprecated_get_frame_saved_regs (struct frame_info *);
-
/* FIXME: cagney/2002-12-06: Has the PC in the current frame changed?
- "infrun.c", Thanks to DECR_PC_AFTER_BREAK, can change the PC after
+ "infrun.c", Thanks to gdbarch_decr_pc_after_break, can change the PC after
the initial frame create. This puts things back in sync.
This replaced: frame->pc = ....; */
/* FIXME: cagney/2002-12-18: Has the frame's base changed? Or to be
more exact, was that initial guess at the frame's base as returned
- by deprecated_read_fp() wrong? If it was, fix it. This shouldn't
+ by the deleted read_fp() wrong? If it was, fix it. This shouldn't
be necessary since the code should be getting the frame's base
correct from the outset.
extern void deprecated_update_frame_base_hack (struct frame_info *frame,
CORE_ADDR base);
-/* FIXME: cagney/2003-01-05: Allocate a frame, along with the
- saved_regs and extra_info. Set up cleanups for all three. Same as
- for deprecated_frame_xmalloc, targets are calling this when
- creating a scratch `struct frame_info'. The frame overhaul makes
- this unnecessary since all frame queries are parameterized with a
- common cache parameter and a frame. */
-extern struct frame_info *deprecated_frame_xmalloc_with_cleanup (long sizeof_saved_regs,
- long sizeof_extra_info);
-
#endif /* !defined (FRAME_H) */