struct gdbarch;
struct ui_file;
-/* A legacy unwinder to prop up architectures using the old style
- saved regs array. */
-extern const struct frame_unwind *legacy_saved_regs_unwind;
-
/* The frame object. */
struct frame_info;
outer-most address (the inner-most address of the previous frame)
is used. Watch out for all the legacy targets that still use the
function pointer register or stack pointer register. They are
- wrong. */
+ wrong.
+
+ This field is valid only if stack_addr_p is true. Otherwise, this
+ frame represents the null frame. */
CORE_ADDR stack_addr;
+
/* The frame's code address. This shall be constant through out the
lifetime of the frame. While the PC (a.k.a. resume address)
changes as the function is executed, this code address cannot.
Typically, it is set to the address of the entry point of the
- frame's function (as returned by frame_func_unwind(). */
+ frame's function (as returned by frame_func_unwind().
+
+ This field is valid only if code_addr_p is true. Otherwise, this
+ frame is considered to have a wildcard code address, i.e. one that
+ matches every address value in frame comparisons. */
CORE_ADDR code_addr;
+
/* The frame's special address. This shall be constant through out the
lifetime of the frame. This is used for architectures that may have
frames that do not change the stack but are still distinct and have
some form of distinct identifier (e.g. the ia64 which uses a 2nd
stack for registers). This field is treated as unordered - i.e. will
not be used in frame ordering comparisons such as frame_id_inner().
- A zero in this field will be treated as a wild-card when comparing
- frames for equality. */
+
+ This field is valid only if special_addr_p is true. Otherwise, this
+ frame is considered to have a wildcard special address, i.e. one that
+ matches every address value in frame comparisons. */
CORE_ADDR special_addr;
+
+ /* Flags to indicate the above fields have valid contents. */
+ unsigned int stack_addr_p : 1;
+ unsigned int code_addr_p : 1;
+ unsigned int special_addr_p : 1;
};
/* Methods for constructing and comparing Frame IDs.
/* Construct a frame ID. The first parameter is the frame's constant
stack address (typically the outer-bound), and the second the
- frame's constant code address (typically the entry point) (or zero,
- to indicate a wild card). The special identifier address is
- defaulted to zero. */
+ frame's constant code address (typically the entry point).
+ The special identifier address is set to indicate a wild card. */
extern struct frame_id frame_id_build (CORE_ADDR stack_addr,
CORE_ADDR code_addr);
/* Construct a special frame ID. The first parameter is the frame's constant
stack address (typically the outer-bound), the second is the
- frame's constant code address (typically the entry point) (or zero,
- to indicate a wild card), and the third parameter is the frame's
- special identifier address (or zero to indicate a wild card or
- unused default). */
+ frame's constant code address (typically the entry point),
+ and the third parameter is the frame's special identifier address. */
extern struct frame_id frame_id_build_special (CORE_ADDR stack_addr,
CORE_ADDR code_addr,
CORE_ADDR special_addr);
+/* Construct a wild card frame ID. The parameter is the frame's constant
+ stack address (typically the outer-bound). The code address as well
+ as the special identifier address are set to indicate wild cards. */
+extern struct frame_id frame_id_build_wild (CORE_ADDR stack_addr);
+
/* Returns non-zero when L is a valid frame (a valid frame has a
non-zero .base). */
extern int frame_id_p (struct frame_id l);
extern void reinit_frame_cache (void);
/* On demand, create the selected frame and then return it. If the
- selected frame can not be created, this function throws an error. */
+ selected frame can not be created, this function prints then throws
+ an error. When MESSAGE is non-NULL, use it for the error message,
+ otherwize use a generic error message. */
/* FIXME: cagney/2002-11-28: At present, when there is no selected
frame, this function always returns the current (inner most) frame.
It should instead, when a thread has previously had its frame
selected (but not resumed) and the frame cache invalidated, find
and then return that thread's previously selected frame. */
-extern struct frame_info *get_selected_frame (void);
+extern struct frame_info *get_selected_frame (const char *message);
/* Select a specific frame. NULL, apparently implies re-select the
inner most frame. */
/* Return the per-frame unique identifer. Can be used to relocate a
frame after a frame cache flush (and other similar operations). If
- FI is NULL, return the null_frame_id. */
+ FI is NULL, return the null_frame_id.
+
+ NOTE: kettenis/20040508: These functions return a structure. On
+ platforms where structures are returned in static storage (vax,
+ m68k), this may trigger compiler bugs in code like:
+
+ if (frame_id_eq (get_frame_id (l), get_frame_id (r)))
+
+ where the return value from the first get_frame_id (l) gets
+ overwritten by the second get_frame_id (r). Please avoid writing
+ code like this. Use code like:
+
+ struct frame_id id = get_frame_id (l);
+ if (frame_id_eq (id, get_frame_id (r)))
+
+ instead, since that avoids the bug. */
extern struct frame_id get_frame_id (struct frame_info *fi);
extern struct frame_id frame_unwind_id (struct frame_info *next_frame);
enum frame_type
{
- /* The frame's type hasn't yet been defined. This is a catch-all
- for legacy code that uses really strange technicques, such as
- deprecated_set_frame_type, to set the frame's type. New code
- should not use this value. */
- UNKNOWN_FRAME,
/* A true stack frame, created by the target program during normal
execution. */
NORMAL_FRAME,
DUMMY_FRAME,
/* In a signal handler, various OSs handle this in various ways.
The main thing is that the frame may be far from normal. */
- SIGTRAMP_FRAME
+ SIGTRAMP_FRAME,
+ /* Sentinel or registers frame. This frame obtains register values
+ direct from the inferior's registers. */
+ SENTINEL_FRAME
};
extern enum frame_type get_frame_type (struct frame_info *);
-/* FIXME: cagney/2002-11-10: Some targets want to directly mark a
- frame as being of a specific type. This shouldn't be necessary.
- DEPRECATED_PC_IN_CALL_DUMMY() indicates a DUMMY_FRAME. I suspect
- the real problem here is that get_prev_frame() only sets
- initialized after DEPRECATED_INIT_EXTRA_FRAME_INFO as been called.
- Consequently, some targets found that the frame's type was wrong
- and tried to fix it. The correct fix is to modify get_prev_frame()
- so that it initializes the frame's type before calling any other
- functions. */
-extern void deprecated_set_frame_type (struct frame_info *,
- enum frame_type type);
-
/* Unwind the stack frame so that the value of REGNUM, in the previous
(up, older) frame is returned. If VALUEP is NULL, don't
fetch/compute the value. Instead just return the location of the
int regnum, ULONGEST *val);
/* Get the value of the register that belongs to this FRAME. This
- function is a wrapper to the call sequence ``frame_unwind_register
+ function is a wrapper to the call sequence ``frame_register_unwind
(get_next_frame (FRAME))''. As per frame_register_unwind(), if
VALUEP is NULL, the registers value is not fetched/computed. */
#define FRAME_OBSTACK_ZALLOC(TYPE) ((TYPE *) frame_obstack_zalloc (sizeof (TYPE)))
#define FRAME_OBSTACK_CALLOC(NUMBER,TYPE) ((TYPE *) frame_obstack_zalloc ((NUMBER) * sizeof (TYPE)))
-/* If legacy_frame_chain_valid() returns zero it means that the given
- frame is the outermost one and has no caller.
-
- This method has been superseded by the per-architecture
- frame_unwind_pc() (returns 0 to indicate an invalid return address)
- and per-frame this_id() (returns a NULL frame ID to indicate an
- invalid frame). */
-extern int legacy_frame_chain_valid (CORE_ADDR, struct frame_info *);
-
-extern void generic_save_dummy_frame_tos (CORE_ADDR sp);
+/* Create a regcache, and copy the frame's registers into it. */
+struct regcache *frame_save_as_regcache (struct frame_info *this_frame);
extern struct block *get_frame_block (struct frame_info *,
CORE_ADDR *addr_in_block);
extern CORE_ADDR get_pc_function_start (CORE_ADDR);
-extern int legacy_frameless_look_for_prologue (struct frame_info *);
-
extern struct frame_info *find_relative_frame (struct frame_info *, int *);
extern void show_and_print_stack_frame (struct frame_info *fi, int print_level,
extern struct frame_info *block_innermost_frame (struct block *);
-/* NOTE: cagney/2002-09-13: There is no need for this function. */
-extern CORE_ADDR deprecated_read_register_dummy (CORE_ADDR pc,
- CORE_ADDR fp, int);
-extern void generic_push_dummy_frame (void);
-extern void deprecated_pop_dummy_frame (void);
-
-extern int deprecated_pc_in_call_dummy (CORE_ADDR pc, CORE_ADDR sp,
- CORE_ADDR fp);
-
-/* NOTE: cagney/2002-06-26: Targets should no longer use this
- function. Instead, the contents of a dummy frame register can be
- obtained by applying: frame_register_unwind to the dummy frame; or
- frame_register_unwind() to the next outer frame. */
-
-extern char *deprecated_generic_find_dummy_frame (CORE_ADDR pc, CORE_ADDR fp);
-
-
-/* The DEPRECATED_GET_SAVED_REGISTER architecture interface is
- entirely redundant. New architectures should implement per-frame
- unwinders (ref "frame-unwind.h"). */
-extern void deprecated_generic_get_saved_register (char *, int *, CORE_ADDR *,
- struct frame_info *, int,
- enum lval_type *);
-
-extern void generic_save_call_dummy_addr (CORE_ADDR lo, CORE_ADDR hi);
+extern int deprecated_pc_in_call_dummy (CORE_ADDR pc);
/* FIXME: cagney/2003-02-02: Should be deprecated or replaced with a
function called get_frame_register_p(). This slightly weird (and
extern struct frame_info *create_new_frame (CORE_ADDR base, CORE_ADDR pc);
-
-/* Create/access the frame's `extra info'. The extra info is used by
- older code to store information such as the analyzed prologue. The
- zalloc() should only be called by the INIT_EXTRA_INFO method. */
-
-extern struct frame_extra_info *frame_extra_info_zalloc (struct frame_info *fi,
- long size);
-extern struct frame_extra_info *get_frame_extra_info (struct frame_info *fi);
-
-/* Create/access the frame's `saved_regs'. The saved regs are used by
- older code to store the address of each register (except for
- SP_REGNUM where the value of the register in the previous frame is
- stored). */
-extern CORE_ADDR *frame_saved_regs_zalloc (struct frame_info *);
-extern CORE_ADDR *deprecated_get_frame_saved_regs (struct frame_info *);
-
/* FIXME: cagney/2002-12-06: Has the PC in the current frame changed?
"infrun.c", Thanks to DECR_PC_AFTER_BREAK, can change the PC after
the initial frame create. This puts things back in sync.
/* FIXME: cagney/2002-12-18: Has the frame's base changed? Or to be
more exact, was that initial guess at the frame's base as returned
- by deprecated_read_fp() wrong? If it was, fix it. This shouldn't
+ by the deleted read_fp() wrong? If it was, fix it. This shouldn't
be necessary since the code should be getting the frame's base
correct from the outset.
extern void deprecated_update_frame_base_hack (struct frame_info *frame,
CORE_ADDR base);
-/* FIXME: cagney/2003-01-05: Allocate a frame, along with the
- saved_regs and extra_info. Set up cleanups for all three. Same as
- for deprecated_frame_xmalloc, targets are calling this when
- creating a scratch `struct frame_info'. The frame overhaul makes
- this unnecessary since all frame queries are parameterized with a
- common cache parameter and a frame. */
-extern struct frame_info *deprecated_frame_xmalloc_with_cleanup (long sizeof_saved_regs,
- long sizeof_extra_info);
-
-/* Return non-zero if the architecture is relying on legacy frame
- code. */
-extern int legacy_frame_p (struct gdbarch *gdbarch);
-
#endif /* !defined (FRAME_H) */