/* Dynamic architecture support for GDB, the GNU debugger.
- Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
- Free Software Foundation, Inc.
+ Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
+ 2007, 2008, 2009 Free Software Foundation, Inc.
This file is part of GDB.
extern int gdbarch_long_long_bit (struct gdbarch *gdbarch);
extern void set_gdbarch_long_long_bit (struct gdbarch *gdbarch, int long_long_bit);
-/* The ABI default bit-size and format for "float", "double", and "long
- double". These bit/format pairs should eventually be combined into
- a single object. For the moment, just initialize them as a pair.
+/* The ABI default bit-size and format for "half", "float", "double", and
+ "long double". These bit/format pairs should eventually be combined
+ into a single object. For the moment, just initialize them as a pair.
Each format describes both the big and little endian layouts (if
useful). */
+extern int gdbarch_half_bit (struct gdbarch *gdbarch);
+extern void set_gdbarch_half_bit (struct gdbarch *gdbarch, int half_bit);
+
+extern const struct floatformat ** gdbarch_half_format (struct gdbarch *gdbarch);
+extern void set_gdbarch_half_format (struct gdbarch *gdbarch, const struct floatformat ** half_format);
+
extern int gdbarch_float_bit (struct gdbarch *gdbarch);
extern void set_gdbarch_float_bit (struct gdbarch *gdbarch, int float_bit);
/ addr_bit will be set from it.
If gdbarch_ptr_bit and gdbarch_addr_bit are different, you'll probably
- also need to set gdbarch_pointer_to_address and gdbarch_address_to_pointer
- as well.
+ also need to set gdbarch_dwarf2_addr_size, gdbarch_pointer_to_address and
+ gdbarch_address_to_pointer as well.
ptr_bit is the size of a pointer on the target */
extern int gdbarch_addr_bit (struct gdbarch *gdbarch);
extern void set_gdbarch_addr_bit (struct gdbarch *gdbarch, int addr_bit);
+/* dwarf2_addr_size is the target address size as used in the Dwarf debug
+ info. For .debug_frame FDEs, this is supposed to be the target address
+ size from the associated CU header, and which is equivalent to the
+ DWARF2_ADDR_SIZE as defined by the target specific GCC back-end.
+ Unfortunately there is no good way to determine this value. Therefore
+ dwarf2_addr_size simply defaults to the target pointer size.
+
+ dwarf2_addr_size is not used for .eh_frame FDEs, which are generally
+ defined using the target's pointer size so far.
+
+ Note that dwarf2_addr_size only needs to be redefined by a target if the
+ GCC back-end defines a DWARF2_ADDR_SIZE other than the target pointer size,
+ and if Dwarf versions < 4 need to be supported. */
+
+extern int gdbarch_dwarf2_addr_size (struct gdbarch *gdbarch);
+extern void set_gdbarch_dwarf2_addr_size (struct gdbarch *gdbarch, int dwarf2_addr_size);
+
/* One if `char' acts like `signed char', zero if `unsigned char'. */
extern int gdbarch_char_signed (struct gdbarch *gdbarch);
extern const gdb_byte * gdbarch_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *lenptr);
extern void set_gdbarch_breakpoint_from_pc (struct gdbarch *gdbarch, gdbarch_breakpoint_from_pc_ftype *breakpoint_from_pc);
+/* Return the adjusted address and kind to use for Z0/Z1 packets.
+ KIND is usually the memory length of the breakpoint, but may have a
+ different target-specific meaning. */
+
+typedef void (gdbarch_remote_breakpoint_from_pc_ftype) (struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *kindptr);
+extern void gdbarch_remote_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *kindptr);
+extern void set_gdbarch_remote_breakpoint_from_pc (struct gdbarch *gdbarch, gdbarch_remote_breakpoint_from_pc_ftype *remote_breakpoint_from_pc);
+
extern int gdbarch_adjust_breakpoint_address_p (struct gdbarch *gdbarch);
typedef CORE_ADDR (gdbarch_adjust_breakpoint_address_ftype) (struct gdbarch *gdbarch, CORE_ADDR bpaddr);
extern const struct regset * gdbarch_regset_from_core_section (struct gdbarch *gdbarch, const char *sect_name, size_t sect_size);
extern void set_gdbarch_regset_from_core_section (struct gdbarch *gdbarch, gdbarch_regset_from_core_section_ftype *regset_from_core_section);
-/* When creating core dumps, some systems encode the PID in addition
- to the LWP id in core file register section names. In those cases, the
- "XXX" in ".reg/XXX" is encoded as [LWPID << 16 | PID]. This setting
- is set to true for such architectures; false if "XXX" represents an LWP
- or thread id with no special encoding. */
-
-extern int gdbarch_core_reg_section_encodes_pid (struct gdbarch *gdbarch);
-extern void set_gdbarch_core_reg_section_encodes_pid (struct gdbarch *gdbarch, int core_reg_section_encodes_pid);
-
/* Supported register notes in a core file. */
extern struct core_regset_section * gdbarch_core_regset_sections (struct gdbarch *gdbarch);
extern LONGEST gdbarch_core_xfer_shared_libraries (struct gdbarch *gdbarch, gdb_byte *readbuf, ULONGEST offset, LONGEST len);
extern void set_gdbarch_core_xfer_shared_libraries (struct gdbarch *gdbarch, gdbarch_core_xfer_shared_libraries_ftype *core_xfer_shared_libraries);
-/* How the core_stratum layer converts a PTID from a core file to a
- string. */
+/* How the core target converts a PTID from a core file to a string. */
extern int gdbarch_core_pid_to_str_p (struct gdbarch *gdbarch);
extern struct displaced_step_closure * gdbarch_displaced_step_copy_insn (struct gdbarch *gdbarch, CORE_ADDR from, CORE_ADDR to, struct regcache *regs);
extern void set_gdbarch_displaced_step_copy_insn (struct gdbarch *gdbarch, gdbarch_displaced_step_copy_insn_ftype *displaced_step_copy_insn);
+/* Return true if GDB should use hardware single-stepping to execute
+ the displaced instruction identified by CLOSURE. If false,
+ GDB will simply restart execution at the displaced instruction
+ location, and it is up to the target to ensure GDB will receive
+ control again (e.g. by placing a software breakpoint instruction
+ into the displaced instruction buffer).
+
+ The default implementation returns false on all targets that
+ provide a gdbarch_software_single_step routine, and true otherwise. */
+
+typedef int (gdbarch_displaced_step_hw_singlestep_ftype) (struct gdbarch *gdbarch, struct displaced_step_closure *closure);
+extern int gdbarch_displaced_step_hw_singlestep (struct gdbarch *gdbarch, struct displaced_step_closure *closure);
+extern void set_gdbarch_displaced_step_hw_singlestep (struct gdbarch *gdbarch, gdbarch_displaced_step_hw_singlestep_ftype *displaced_step_hw_singlestep);
+
/* Fix up the state resulting from successfully single-stepping a
displaced instruction, to give the result we would have gotten from
stepping the instruction in its original location.
extern CORE_ADDR gdbarch_displaced_step_location (struct gdbarch *gdbarch);
extern void set_gdbarch_displaced_step_location (struct gdbarch *gdbarch, gdbarch_displaced_step_location_ftype *displaced_step_location);
+/* Relocate an instruction to execute at a different address. OLDLOC
+ is the address in the inferior memory where the instruction to
+ relocate is currently at. On input, TO points to the destination
+ where we want the instruction to be copied (and possibly adjusted)
+ to. On output, it points to one past the end of the resulting
+ instruction(s). The effect of executing the instruction at TO shall
+ be the same as if executing it at FROM. For example, call
+ instructions that implicitly push the return address on the stack
+ should be adjusted to return to the instruction after OLDLOC;
+ relative branches, and other PC-relative instructions need the
+ offset adjusted; etc. */
+
+extern int gdbarch_relocate_instruction_p (struct gdbarch *gdbarch);
+
+typedef void (gdbarch_relocate_instruction_ftype) (struct gdbarch *gdbarch, CORE_ADDR *to, CORE_ADDR from);
+extern void gdbarch_relocate_instruction (struct gdbarch *gdbarch, CORE_ADDR *to, CORE_ADDR from);
+extern void set_gdbarch_relocate_instruction (struct gdbarch *gdbarch, gdbarch_relocate_instruction_ftype *relocate_instruction);
+
/* Refresh overlay mapped state for section OSECT. */
extern int gdbarch_overlay_update_p (struct gdbarch *gdbarch);
extern int gdbarch_process_record (struct gdbarch *gdbarch, struct regcache *regcache, CORE_ADDR addr);
extern void set_gdbarch_process_record (struct gdbarch *gdbarch, gdbarch_process_record_ftype *process_record);
+/* Save process state after a signal.
+ Return -1 if something goes wrong, 0 otherwise. */
+
+extern int gdbarch_process_record_signal_p (struct gdbarch *gdbarch);
+
+typedef int (gdbarch_process_record_signal_ftype) (struct gdbarch *gdbarch, struct regcache *regcache, enum target_signal signal);
+extern int gdbarch_process_record_signal (struct gdbarch *gdbarch, struct regcache *regcache, enum target_signal signal);
+extern void set_gdbarch_process_record_signal (struct gdbarch *gdbarch, gdbarch_process_record_signal_ftype *process_record_signal);
+
/* Signal translation: translate inferior's signal (host's) number into
GDB's representation. */
extern int gdbarch_has_global_breakpoints (struct gdbarch *gdbarch);
extern void set_gdbarch_has_global_breakpoints (struct gdbarch *gdbarch, int has_global_breakpoints);
+/* True if inferiors share an address space (e.g., uClinux). */
+
+typedef int (gdbarch_has_shared_address_space_ftype) (struct gdbarch *gdbarch);
+extern int gdbarch_has_shared_address_space (struct gdbarch *gdbarch);
+extern void set_gdbarch_has_shared_address_space (struct gdbarch *gdbarch, gdbarch_has_shared_address_space_ftype *has_shared_address_space);
+
+/* True if a fast tracepoint can be set at an address. */
+
+typedef int (gdbarch_fast_tracepoint_valid_at_ftype) (struct gdbarch *gdbarch, CORE_ADDR addr, int *isize, char **msg);
+extern int gdbarch_fast_tracepoint_valid_at (struct gdbarch *gdbarch, CORE_ADDR addr, int *isize, char **msg);
+extern void set_gdbarch_fast_tracepoint_valid_at (struct gdbarch *gdbarch, gdbarch_fast_tracepoint_valid_at_ftype *fast_tracepoint_valid_at);
+
+/* Return the "auto" target charset. */
+
+typedef const char * (gdbarch_auto_charset_ftype) (void);
+extern const char * gdbarch_auto_charset (struct gdbarch *gdbarch);
+extern void set_gdbarch_auto_charset (struct gdbarch *gdbarch, gdbarch_auto_charset_ftype *auto_charset);
+
+/* Return the "auto" target wide charset. */
+
+typedef const char * (gdbarch_auto_wide_charset_ftype) (void);
+extern const char * gdbarch_auto_wide_charset (struct gdbarch *gdbarch);
+extern void set_gdbarch_auto_wide_charset (struct gdbarch *gdbarch, gdbarch_auto_wide_charset_ftype *auto_wide_charset);
+
+/* If non-empty, this is a file extension that will be opened in place
+ of the file extension reported by the shared library list.
+
+ This is most useful for toolchains that use a post-linker tool,
+ where the names of the files run on the target differ in extension
+ compared to the names of the files GDB should load for debug info. */
+
+extern const char * gdbarch_solib_symbols_extension (struct gdbarch *gdbarch);
+extern void set_gdbarch_solib_symbols_extension (struct gdbarch *gdbarch, const char * solib_symbols_extension);
+
+/* If true, the target OS has DOS-based file system semantics. That
+ is, absolute paths include a drive name, and the backslash is
+ considered a directory separator. */
+
+extern int gdbarch_has_dos_based_file_system (struct gdbarch *gdbarch);
+extern void set_gdbarch_has_dos_based_file_system (struct gdbarch *gdbarch, int has_dos_based_file_system);
+
/* Definition for an unknown syscall, used basically in error-cases. */
#define UNKNOWN_SYSCALL (-1)
projects / deliverable / binutils-gdb.git / blobdiff