#endif
-/* The following are initialized by the target dependant code. */
+/* The following are initialized by the target dependent code. */
/* Number of bits in a char or unsigned char for the target machine.
Just like CHAR_BIT in <limits.h> but describes the target machine.
#endif
#endif
+/* Convert stab register number (from `r' declaration) to a gdb REGNUM. */
+
+/* Default (function) for non- multi-arch platforms. */
+#if (!GDB_MULTI_ARCH) && !defined (STAB_REG_TO_REGNUM)
+#define STAB_REG_TO_REGNUM(stab_regnr) (no_op_reg_to_regnum (stab_regnr))
+#endif
+
+typedef int (gdbarch_stab_reg_to_regnum_ftype) (int stab_regnr);
+extern int gdbarch_stab_reg_to_regnum (struct gdbarch *gdbarch, int stab_regnr);
+extern void set_gdbarch_stab_reg_to_regnum (struct gdbarch *gdbarch, gdbarch_stab_reg_to_regnum_ftype *stab_reg_to_regnum);
+#if GDB_MULTI_ARCH
+#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (STAB_REG_TO_REGNUM)
+#define STAB_REG_TO_REGNUM(stab_regnr) (gdbarch_stab_reg_to_regnum (current_gdbarch, stab_regnr))
+#endif
+#endif
+
+/* Provide a default mapping from a ecoff register number to a gdb REGNUM. */
+
+/* Default (function) for non- multi-arch platforms. */
+#if (!GDB_MULTI_ARCH) && !defined (ECOFF_REG_TO_REGNUM)
+#define ECOFF_REG_TO_REGNUM(ecoff_regnr) (no_op_reg_to_regnum (ecoff_regnr))
+#endif
+
+typedef int (gdbarch_ecoff_reg_to_regnum_ftype) (int ecoff_regnr);
+extern int gdbarch_ecoff_reg_to_regnum (struct gdbarch *gdbarch, int ecoff_regnr);
+extern void set_gdbarch_ecoff_reg_to_regnum (struct gdbarch *gdbarch, gdbarch_ecoff_reg_to_regnum_ftype *ecoff_reg_to_regnum);
+#if GDB_MULTI_ARCH
+#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (ECOFF_REG_TO_REGNUM)
+#define ECOFF_REG_TO_REGNUM(ecoff_regnr) (gdbarch_ecoff_reg_to_regnum (current_gdbarch, ecoff_regnr))
+#endif
+#endif
+
+/* Provide a default mapping from a DWARF register number to a gdb REGNUM. */
+
+/* Default (function) for non- multi-arch platforms. */
+#if (!GDB_MULTI_ARCH) && !defined (DWARF_REG_TO_REGNUM)
+#define DWARF_REG_TO_REGNUM(dwarf_regnr) (no_op_reg_to_regnum (dwarf_regnr))
+#endif
+
+typedef int (gdbarch_dwarf_reg_to_regnum_ftype) (int dwarf_regnr);
+extern int gdbarch_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int dwarf_regnr);
+extern void set_gdbarch_dwarf_reg_to_regnum (struct gdbarch *gdbarch, gdbarch_dwarf_reg_to_regnum_ftype *dwarf_reg_to_regnum);
+#if GDB_MULTI_ARCH
+#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (DWARF_REG_TO_REGNUM)
+#define DWARF_REG_TO_REGNUM(dwarf_regnr) (gdbarch_dwarf_reg_to_regnum (current_gdbarch, dwarf_regnr))
+#endif
+#endif
+
+/* Convert from an sdb register number to an internal gdb register number.
+ This should be defined in tm.h, if REGISTER_NAMES is not set up
+ to map one to one onto the sdb register numbers. */
+
+/* Default (function) for non- multi-arch platforms. */
+#if (!GDB_MULTI_ARCH) && !defined (SDB_REG_TO_REGNUM)
+#define SDB_REG_TO_REGNUM(sdb_regnr) (no_op_reg_to_regnum (sdb_regnr))
+#endif
+
+typedef int (gdbarch_sdb_reg_to_regnum_ftype) (int sdb_regnr);
+extern int gdbarch_sdb_reg_to_regnum (struct gdbarch *gdbarch, int sdb_regnr);
+extern void set_gdbarch_sdb_reg_to_regnum (struct gdbarch *gdbarch, gdbarch_sdb_reg_to_regnum_ftype *sdb_reg_to_regnum);
+#if GDB_MULTI_ARCH
+#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (SDB_REG_TO_REGNUM)
+#define SDB_REG_TO_REGNUM(sdb_regnr) (gdbarch_sdb_reg_to_regnum (current_gdbarch, sdb_regnr))
+#endif
+#endif
+
+/* Default (function) for non- multi-arch platforms. */
+#if (!GDB_MULTI_ARCH) && !defined (DWARF2_REG_TO_REGNUM)
+#define DWARF2_REG_TO_REGNUM(dwarf2_regnr) (no_op_reg_to_regnum (dwarf2_regnr))
+#endif
+
+typedef int (gdbarch_dwarf2_reg_to_regnum_ftype) (int dwarf2_regnr);
+extern int gdbarch_dwarf2_reg_to_regnum (struct gdbarch *gdbarch, int dwarf2_regnr);
+extern void set_gdbarch_dwarf2_reg_to_regnum (struct gdbarch *gdbarch, gdbarch_dwarf2_reg_to_regnum_ftype *dwarf2_reg_to_regnum);
+#if GDB_MULTI_ARCH
+#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (DWARF2_REG_TO_REGNUM)
+#define DWARF2_REG_TO_REGNUM(dwarf2_regnr) (gdbarch_dwarf2_reg_to_regnum (current_gdbarch, dwarf2_regnr))
+#endif
+#endif
+
/* Default (function) for non- multi-arch platforms. */
#if (!GDB_MULTI_ARCH) && !defined (REGISTER_NAME)
#define REGISTER_NAME(regnr) (legacy_register_name (regnr))
#endif
#endif
+#if defined (REGISTER_BYTES_OK)
+/* Legacy for systems yet to multi-arch REGISTER_BYTES_OK */
+#define REGISTER_BYTES_OK_P() (1)
+#endif
+
+/* Default predicate for non- multi-arch targets. */
+#if (!GDB_MULTI_ARCH) && !defined (REGISTER_BYTES_OK_P)
+#define REGISTER_BYTES_OK_P() (0)
+#endif
+
+extern int gdbarch_register_bytes_ok_p (struct gdbarch *gdbarch);
+#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (REGISTER_BYTES_OK_P)
+#define REGISTER_BYTES_OK_P() (gdbarch_register_bytes_ok_p (current_gdbarch))
+#endif
+
+/* Default (function) for non- multi-arch platforms. */
+#if (!GDB_MULTI_ARCH) && !defined (REGISTER_BYTES_OK)
+#define REGISTER_BYTES_OK(nr_bytes) (internal_error ("REGISTER_BYTES_OK"), 0)
+#endif
+
+typedef int (gdbarch_register_bytes_ok_ftype) (long nr_bytes);
+extern int gdbarch_register_bytes_ok (struct gdbarch *gdbarch, long nr_bytes);
+extern void set_gdbarch_register_bytes_ok (struct gdbarch *gdbarch, gdbarch_register_bytes_ok_ftype *register_bytes_ok);
+#if GDB_MULTI_ARCH
+#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (REGISTER_BYTES_OK)
+#define REGISTER_BYTES_OK(nr_bytes) (gdbarch_register_bytes_ok (current_gdbarch, nr_bytes))
+#endif
+#endif
+
extern int gdbarch_use_generic_dummy_frames (struct gdbarch *gdbarch);
extern void set_gdbarch_use_generic_dummy_frames (struct gdbarch *gdbarch, int use_generic_dummy_frames);
#if GDB_MULTI_ARCH
#endif
#endif
+extern int gdbarch_parm_boundary (struct gdbarch *gdbarch);
+extern void set_gdbarch_parm_boundary (struct gdbarch *gdbarch, int parm_boundary);
+#if GDB_MULTI_ARCH
+#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (PARM_BOUNDARY)
+#define PARM_BOUNDARY (gdbarch_parm_boundary (current_gdbarch))
+#endif
+#endif
+
/* Default (value) for non- multi-arch platforms. */
#if (!GDB_MULTI_ARCH) && !defined (TARGET_FLOAT_FORMAT)
#define TARGET_FLOAT_FORMAT (default_float_format (current_gdbarch))
#endif
#endif
+/* Default (function) for non- multi-arch platforms. */
+#if (!GDB_MULTI_ARCH) && !defined (CONVERT_FROM_FUNC_PTR_ADDR)
+#define CONVERT_FROM_FUNC_PTR_ADDR(addr) (default_convert_from_func_ptr_addr (addr))
+#endif
+
+typedef CORE_ADDR (gdbarch_convert_from_func_ptr_addr_ftype) (CORE_ADDR addr);
+extern CORE_ADDR gdbarch_convert_from_func_ptr_addr (struct gdbarch *gdbarch, CORE_ADDR addr);
+extern void set_gdbarch_convert_from_func_ptr_addr (struct gdbarch *gdbarch, gdbarch_convert_from_func_ptr_addr_ftype *convert_from_func_ptr_addr);
+#if GDB_MULTI_ARCH
+#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (CONVERT_FROM_FUNC_PTR_ADDR)
+#define CONVERT_FROM_FUNC_PTR_ADDR(addr) (gdbarch_convert_from_func_ptr_addr (current_gdbarch, addr))
+#endif
+#endif
+
extern struct gdbarch_tdep *gdbarch_tdep (struct gdbarch *gdbarch);
The mechanisms below ensures that there is only a loose connection
between the set-architecture command and the various GDB
- components. Each component can independantly register their need
+ components. Each component can independently register their need
to maintain architecture specific data with gdbarch.
Pragmatics:
The more traditional mega-struct containing architecture specific
data for all the various GDB components was also considered. Since
- GDB is built from a variable number of (fairly independant)
+ GDB is built from a variable number of (fairly independent)
components it was determined that the global aproach was not
applicable. */
that the INFO.BYTE_ORDER is non-zero.
The INIT function shall return any of: NULL - indicating that it
- doesn't reconize the selected architecture; an existing ``struct
+ doesn't recognize the selected architecture; an existing ``struct
gdbarch'' from the ARCHES list - indicating that the new
architecture is just a synonym for an earlier architecture (see
gdbarch_list_lookup_by_info()); a newly created ``struct gdbarch''
-/* The target-system-dependant byte order is dynamic */
+/* The target-system-dependent byte order is dynamic */
/* TARGET_BYTE_ORDER_SELECTABLE_P determines if the target endianness
is selectable at runtime. The user can use the ``set endian''
-/* The target-system-dependant BFD architecture is dynamic */
+/* The target-system-dependent BFD architecture is dynamic */
extern int target_architecture_auto;
#ifndef TARGET_ARCHITECTURE_AUTO
#endif
-/* The target-system-dependant disassembler is semi-dynamic */
+/* The target-system-dependent disassembler is semi-dynamic */
#include "dis-asm.h" /* Get defs for disassemble_info */
#endif
-/* Set the dynamic target-system-dependant parameters (architecture,
+/* Set the dynamic target-system-dependent parameters (architecture,
byte-order, ...) using information found in the BFD */
extern void set_gdbarch_from_file (bfd *);
projects / deliverable / binutils-gdb.git / blobdiff