# Architecture commands for GDB, the GNU debugger.
#
-# Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
-# Foundation, Inc.
-#
+# Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free
+# Software Foundation, Inc.
#
# This file is part of GDB.
#
#
f:=:CORE_ADDR:pointer_to_address:struct type *type, const void *buf:type, buf::unsigned_pointer_to_address::0
f:=:void:address_to_pointer:struct type *type, void *buf, CORE_ADDR addr:type, buf, addr::unsigned_address_to_pointer::0
-F:=:CORE_ADDR:integer_to_address:struct type *type, void *buf:type, buf
+M::CORE_ADDR:integer_to_address:struct type *type, const bfd_byte *buf:type, buf
#
# NOTE: cagney/2003-03-24: Replaced by PUSH_ARGUMENTS.
F:=:void:deprecated_store_struct_return:CORE_ADDR addr, CORE_ADDR sp:addr, sp
v:=:CORE_ADDR:deprecated_function_start_offset:::0:::0
m::void:remote_translate_xfer_address:struct regcache *regcache, CORE_ADDR gdb_addr, int gdb_len, CORE_ADDR *rem_addr, int *rem_len:regcache, gdb_addr, gdb_len, rem_addr, rem_len::generic_remote_translate_xfer_address::0
+
+# Fetch the target specific address used to represent a load module.
+F:=:CORE_ADDR:fetch_tls_load_module_address:struct objfile *objfile:objfile
#
v:=:CORE_ADDR:frame_args_skip:::0:::0
M::CORE_ADDR:unwind_pc:struct frame_info *next_frame:next_frame
# FIXME/cagney/2001-01-18: The logic is backwards. It should be asking if the target can
# single step. If not, then implement single step using breakpoints.
F:=:void:software_single_step:enum target_signal sig, int insert_breakpoints_p:sig, insert_breakpoints_p
+# Return non-zero if the processor is executing a delay slot and a
+# further single-step is needed before the instruction finishes.
+M::int:single_step_through_delay:struct frame_info *frame:frame
# FIXME: cagney/2003-08-28: Need to find a better way of selecting the
# disassembler. Perhaps objdump can handle it?
f:TARGET_PRINT_INSN:int:print_insn:bfd_vma vma, struct disassemble_info *info:vma, info::0:
# evaluates non-zero, this is the address where the debugger will place
# a step-resume breakpoint to get us past the dynamic linker.
m::CORE_ADDR:skip_solib_resolver:CORE_ADDR pc:pc::generic_skip_solib_resolver::0
-# For SVR4 shared libraries, each call goes through a small piece of
-# trampoline code in the ".plt" section. IN_SOLIB_CALL_TRAMPOLINE evaluates
-# to nonzero if we are currently stopped in one of these.
-f:=:int:in_solib_call_trampoline:CORE_ADDR pc, char *name:pc, name::generic_in_solib_call_trampoline::0
-
# Some systems also have trampoline code for returning from shared libs.
f:=:int:in_solib_return_trampoline:CORE_ADDR pc, char *name:pc, name::generic_in_solib_return_trampoline::0
/* Dynamic architecture support for GDB, the GNU debugger.
- Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free
+ Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free
Software Foundation, Inc.
This file is part of GDB.
#define GDBARCH_DEBUG 0
#endif
int gdbarch_debug = GDBARCH_DEBUG;
+static void
+show_gdbarch_debug (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Architecture debugging is %s.\\n"), value);
+}
static const char *
pformat (const struct floatformat *format)
printf " current_gdbarch->${function} = ${postdefault};\n"
elif [ -n "${invalid_p}" ]
then
- printf " if ((GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL)\n"
- printf " && (${invalid_p}))\n"
+ printf " if (${invalid_p})\n"
printf " fprintf_unfiltered (log, \"\\\\n\\\\t${function}\");\n"
elif [ -n "${predefault}" ]
then
- printf " if ((GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL)\n"
- printf " && (current_gdbarch->${function} == ${predefault}))\n"
+ printf " if (current_gdbarch->${function} == ${predefault})\n"
printf " fprintf_unfiltered (log, \"\\\\n\\\\t${function}\");\n"
fi
fi
make_cleanup (xfree, buf);
if (strlen (buf) > 0)
internal_error (__FILE__, __LINE__,
- "verify_gdbarch: the following are invalid ...%s",
+ _("verify_gdbarch: the following are invalid ...%s"),
buf);
do_cleanups (cleanups);
}
void
gdbarch_dump (struct gdbarch *current_gdbarch, struct ui_file *file)
{
+ const char *gdb_xm_file = "<not-defined>";
+ const char *gdb_nm_file = "<not-defined>";
+ const char *gdb_tm_file = "<not-defined>";
+#if defined (GDB_XM_FILE)
+ gdb_xm_file = GDB_XM_FILE;
+#endif
+ fprintf_unfiltered (file,
+ "gdbarch_dump: GDB_XM_FILE = %s\\n",
+ gdb_xm_file);
+#if defined (GDB_NM_FILE)
+ gdb_nm_file = GDB_NM_FILE;
+#endif
+ fprintf_unfiltered (file,
+ "gdbarch_dump: GDB_NM_FILE = %s\\n",
+ gdb_nm_file);
+#if defined (GDB_TM_FILE)
+ gdb_tm_file = GDB_TM_FILE;
+#endif
fprintf_unfiltered (file,
- "gdbarch_dump: GDB_MULTI_ARCH = %d\\n",
- GDB_MULTI_ARCH);
+ "gdbarch_dump: GDB_TM_FILE = %s\\n",
+ gdb_tm_file);
EOF
function_list | sort -t: -k 4 | while do_read
do
ap = bfd_lookup_arch (rego->bfd_architecture, 0);
if (ap == NULL)
internal_error (__FILE__, __LINE__,
- "gdbarch_architecture_names: multi-arch unknown");
+ _("gdbarch_architecture_names: multi-arch unknown"));
do
{
append_name (&arches, &nr_arches, ap->printable_name);
if (bfd_arch_info == NULL)
{
internal_error (__FILE__, __LINE__,
- "gdbarch: Attempt to register unknown architecture (%d)",
+ _("gdbarch: Attempt to register unknown architecture (%d)"),
bfd_architecture);
}
/* Check that we haven't seen this architecture before */
{
if (bfd_architecture == (*curr)->bfd_architecture)
internal_error (__FILE__, __LINE__,
- "gdbarch: Duplicate registraration of architecture (%s)",
+ _("gdbarch: Duplicate registraration of architecture (%s)"),
bfd_arch_info->printable_name);
}
/* log it */
{
struct cmd_list_element *c;
- deprecated_add_show_from_set
- (add_set_cmd ("arch",
- class_maintenance,
- var_zinteger,
- (char *)&gdbarch_debug,
- "Set architecture debugging.\\n\\
-When non-zero, architecture debugging is enabled.", &setdebuglist),
- &showdebuglist);
- c = add_set_cmd ("archdebug",
- class_maintenance,
- var_zinteger,
- (char *)&gdbarch_debug,
- "Set architecture debugging.\\n\\
-When non-zero, architecture debugging is enabled.", &setlist);
-
- deprecate_cmd (c, "set debug arch");
- deprecate_cmd (deprecated_add_show_from_set (c, &showlist), "show debug arch");
+ add_setshow_zinteger_cmd ("arch", class_maintenance, &gdbarch_debug, _("\\
+Set architecture debugging."), _("\\
+Show architecture debugging."), _("\\
+When non-zero, architecture debugging is enabled."),
+ NULL,
+ show_gdbarch_debug,
+ &setdebuglist, &showdebuglist);
}
EOF
projects / deliverable / binutils-gdb.git / blobdiff