# Architecture commands for GDB, the GNU debugger.
#
# Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
-# 2008 Free Software Foundation, Inc.
+# 2008, 2009 Free Software Foundation, Inc.
#
# This file is part of GDB.
#
# An optional expression that convers MEMBER to a value
# suitable for formatting using %s.
- # If PRINT is empty, paddr_nz (for CORE_ADDR) or paddr_d
- # (anything else) is used.
+ # If PRINT is empty, core_addr_to_string_nz (for CORE_ADDR)
+ # or plongest (anything else) is used.
garbage_at_eol ) : ;;
i:const struct bfd_arch_info *:bfd_arch_info:::&bfd_default_arch_struct::::gdbarch_bfd_arch_info (gdbarch)->printable_name
#
i:int:byte_order:::BFD_ENDIAN_BIG
+i:int:byte_order_for_code:::BFD_ENDIAN_BIG
#
i:enum gdb_osabi:osabi:::GDB_OSABI_UNKNOWN
#
-i:const struct target_desc *:target_desc:::::::paddr_d ((long) gdbarch->target_desc)
+i:const struct target_desc *:target_desc:::::::host_address_to_string (gdbarch->target_desc)
# The bit byte-order has to do just with numbering of bits in debugging symbols
# and such. Conceptually, it's quite separate from byte/word byte order.
# (but not the value contents) filled in.
f:struct value *:value_from_register:struct type *type, int regnum, struct frame_info *frame:type, regnum, frame::default_value_from_register::0
#
-f:CORE_ADDR:pointer_to_address:struct type *type, const gdb_byte *buf:type, buf::unsigned_pointer_to_address::0
-f:void:address_to_pointer:struct type *type, gdb_byte *buf, CORE_ADDR addr:type, buf, addr::unsigned_address_to_pointer::0
+m:CORE_ADDR:pointer_to_address:struct type *type, const gdb_byte *buf:type, buf::unsigned_pointer_to_address::0
+m:void:address_to_pointer:struct type *type, gdb_byte *buf, CORE_ADDR addr:type, buf, addr::unsigned_address_to_pointer::0
M:CORE_ADDR:integer_to_address:struct type *type, const gdb_byte *buf:type, buf
# Return the return-value convention that will be used by FUNCTYPE
M:enum return_value_convention:return_value:struct type *functype, struct type *valtype, struct regcache *regcache, gdb_byte *readbuf, const gdb_byte *writebuf:functype, valtype, regcache, readbuf, writebuf
m:CORE_ADDR:skip_prologue:CORE_ADDR ip:ip:0:0
+M:CORE_ADDR:skip_main_prologue:CORE_ADDR ip:ip
f:int:inner_than:CORE_ADDR lhs, CORE_ADDR rhs:lhs, rhs:0:0
m:const gdb_byte *:breakpoint_from_pc:CORE_ADDR *pcptr, int *lenptr:pcptr, lenptr::0:
M:CORE_ADDR:adjust_breakpoint_address:CORE_ADDR bpaddr:bpaddr
# being a few stray bits in the PC which would mislead us, not as some
# sort of generic thing to handle alignment or segmentation (it's
# possible it should be in TARGET_READ_PC instead).
-f:CORE_ADDR:addr_bits_remove:CORE_ADDR addr:addr::core_addr_identity::0
+m:CORE_ADDR:addr_bits_remove:CORE_ADDR addr:addr::core_addr_identity::0
# It is not at all clear why gdbarch_smash_text_address is not folded into
# gdbarch_addr_bits_remove.
-f:CORE_ADDR:smash_text_address:CORE_ADDR addr:addr::core_addr_identity::0
+m:CORE_ADDR:smash_text_address:CORE_ADDR addr:addr::core_addr_identity::0
# FIXME/cagney/2001-01-18: This should be split in two. A target method that
# indicates if the target needs software single step. An ISA method to
f:CORE_ADDR:skip_trampoline_code:struct frame_info *frame, CORE_ADDR pc:frame, pc::generic_skip_trampoline_code::0
-# If IN_SOLIB_DYNSYM_RESOLVE_CODE returns true, and SKIP_SOLIB_RESOLVER
+# If in_solib_dynsym_resolve_code() returns true, and SKIP_SOLIB_RESOLVER
# evaluates non-zero, this is the address where the debugger will place
# a step-resume breakpoint to get us past the dynamic linker.
m:CORE_ADDR:skip_solib_resolver:CORE_ADDR pc:pc::generic_skip_solib_resolver::0
# Some systems also have trampoline code for returning from shared libs.
-f:int:in_solib_return_trampoline:CORE_ADDR pc, char *name:pc, name::generic_in_solib_return_trampoline::0
+m:int:in_solib_return_trampoline:CORE_ADDR pc, char *name:pc, name::generic_in_solib_return_trampoline::0
# A target might have problems with watchpoints as soon as the stack
# frame of the current function has been destroyed. This mostly happens
# which don't suffer from that problem could just let this functionality
# untouched.
m:int:in_function_epilogue_p:CORE_ADDR addr:addr:0:generic_in_function_epilogue_p::0
-# Given a vector of command-line arguments, return a newly allocated
-# string which, when passed to the create_inferior function, will be
-# parsed (on Unix systems, by the shell) to yield the same vector.
-# This function should call error() if the argument vector is not
-# representable for this target or if this target does not support
-# command-line arguments.
-# ARGC is the number of elements in the vector.
-# ARGV is an array of strings, one per argument.
-m:char *:construct_inferior_arguments:int argc, char **argv:argc, argv::construct_inferior_arguments::0
f:void:elf_make_msymbol_special:asymbol *sym, struct minimal_symbol *msym:sym, msym::default_elf_make_msymbol_special::0
f:void:coff_make_msymbol_special:int val, struct minimal_symbol *msym:val, msym::default_coff_make_msymbol_special::0
-v:const char *:name_of_malloc:::"malloc":"malloc"::0:gdbarch->name_of_malloc
v:int:cannot_step_breakpoint:::0:0::0
v:int:have_nonsteppable_watchpoint:::0:0::0
F:int:address_class_type_flags:int byte_size, int dwarf2_addr_class:byte_size, dwarf2_addr_class
# name SECT_NAME and size SECT_SIZE.
M:const struct regset *:regset_from_core_section:const char *sect_name, size_t sect_size:sect_name, sect_size
+# When creating core dumps, some systems encode the PID in addition
+# to the LWP id in core file register section names. In those cases, the
+# "XXX" in ".reg/XXX" is encoded as [LWPID << 16 | PID]. This setting
+# is set to true for such architectures; false if "XXX" represents an LWP
+# or thread id with no special encoding.
+v:int:core_reg_section_encodes_pid:::0:0::0
+
+# Supported register notes in a core file.
+v:struct core_regset_section *:core_regset_sections:const char *name, int len::::::host_address_to_string (gdbarch->core_regset_sections)
+
# Read offset OFFSET of TARGET_OBJECT_LIBRARIES formatted shared libraries list from
# core file into buffer READBUF with length LEN.
M:LONGEST:core_xfer_shared_libraries:gdb_byte *readbuf, ULONGEST offset, LONGEST len:readbuf, offset, len
+# How the core_stratum layer converts a PTID from a core file to a
+# string.
+M:char *:core_pid_to_str:ptid_t ptid:ptid
+
+# BFD target to use when generating a core file.
+V:const char *:gcore_bfd_target:::0:0:::gdbarch->gcore_bfd_target
+
# If the elements of C++ vtables are in-place function descriptors rather
# than normal function pointers (which may point to code or a descriptor),
# set this to one.
# Set if the address in N_SO or N_FUN stabs may be zero.
v:int:sofun_address_maybe_missing:::0:0::0
+# Parse the instruction at ADDR storing in the record execution log
+# the registers REGCACHE and memory ranges that will be affected when
+# the instruction executes, along with their current values.
+# Return -1 if something goes wrong, 0 otherwise.
+M:int:process_record:struct regcache *regcache, CORE_ADDR addr:regcache, addr
+
# Signal translation: translate inferior's signal (host's) number into
# GDB's representation.
m:enum target_signal:target_signal_from_host:int signo:signo::default_target_signal_from_host::0
# signal number.
m:int:target_signal_to_host:enum target_signal ts:ts::default_target_signal_to_host::0
+# Extra signal info inspection.
+#
+# Return a type suitable to inspect extra signal information.
+M:struct type *:get_siginfo_type:void:
+
# Record architecture-specific information from the symbol table.
M:void:record_special_symbol:struct objfile *objfile, asymbol *sym:objfile, sym
+
+# True if the list of shared libraries is one and only for all
+# processes, as opposed to a list of shared libraries per inferior.
+# This usually means that all processes, although may or may not share
+# an address space, will see the same set of symbols at the same
+# addresses.
+v:int:has_global_solist:::0:0::0
+
+# On some targets, even though each inferior has its own private
+# address space, the debug interface takes care of making breakpoints
+# visible to all address spaces automatically. For such cases,
+# this property should be set to true.
+v:int:has_global_breakpoints:::0:0::0
EOF
}
struct bp_target_info;
struct target_desc;
struct displaced_step_closure;
+struct core_regset_section;
extern struct gdbarch *current_gdbarch;
+
+/* The architecture associated with the connection to the target.
+
+ The architecture vector provides some information that is really
+ a property of the target: The layout of certain packets, for instance;
+ or the solib_ops vector. Etc. To differentiate architecture accesses
+ to per-target properties from per-thread/per-frame/per-objfile properties,
+ accesses to per-target properties should be made through target_gdbarch.
+
+ Eventually, when support for multiple targets is implemented in
+ GDB, this global should be made target-specific. */
+extern struct gdbarch *target_gdbarch;
EOF
# function typedef's
/* Use default: BFD_ENDIAN_UNKNOWN (NB: is not ZERO). */
int byte_order;
+ int byte_order_for_code;
+
/* Use default: NULL (ZERO). */
bfd *abfd;
#include "gdb_assert.h"
#include "gdb_string.h"
-#include "gdb-events.h"
#include "reggroups.h"
#include "osabi.h"
#include "gdb_obstack.h"
+#include "observer.h"
+#include "regcache.h"
/* Static function declarations */
};
struct gdbarch *current_gdbarch = &startup_gdbarch;
+struct gdbarch *target_gdbarch = &startup_gdbarch;
EOF
# Create a new gdbarch struct
if class_is_function_p
then
printf " fprintf_unfiltered (file,\n"
- printf " \"gdbarch_dump: ${function} = <0x%%lx>\\\\n\",\n"
- printf " (long) gdbarch->${function});\n"
+ printf " \"gdbarch_dump: ${function} = <%%s>\\\\n\",\n"
+ printf " host_address_to_string (gdbarch->${function}));\n"
else
# It is a variable
case "${print}:${returntype}" in
:CORE_ADDR )
- fmt="0x%s"
- print="paddr_nz (gdbarch->${function})"
+ fmt="%s"
+ print="core_addr_to_string_nz (gdbarch->${function})"
;;
:* )
fmt="%s"
- print="paddr_d (gdbarch->${function})"
+ print="plongest (gdbarch->${function})"
;;
* )
fmt="%s"
}
/* log it */
if (gdbarch_debug)
- fprintf_unfiltered (gdb_stdlog, "register_gdbarch_init (%s, 0x%08lx)\n",
+ fprintf_unfiltered (gdb_stdlog, "register_gdbarch_init (%s, %s)\n",
bfd_arch_info->printable_name,
- (long) init);
+ host_address_to_string (init));
/* Append it */
(*curr) = XMALLOC (struct gdbarch_registration);
(*curr)->bfd_architecture = bfd_architecture;
"find_arch_by_info: info.osabi %d (%s)\n",
info.osabi, gdbarch_osabi_name (info.osabi));
fprintf_unfiltered (gdb_stdlog,
- "find_arch_by_info: info.abfd 0x%lx\n",
- (long) info.abfd);
+ "find_arch_by_info: info.abfd %s\n",
+ host_address_to_string (info.abfd));
fprintf_unfiltered (gdb_stdlog,
- "find_arch_by_info: info.tdep_info 0x%lx\n",
- (long) info.tdep_info);
+ "find_arch_by_info: info.tdep_info %s\n",
+ host_address_to_string (info.tdep_info));
}
/* Find the tdep code that knows about this architecture. */
struct gdbarch_list *this;
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "find_arch_by_info: "
- "Previous architecture 0x%08lx (%s) selected\n",
- (long) new_gdbarch,
+ "Previous architecture %s (%s) selected\n",
+ host_address_to_string (new_gdbarch),
new_gdbarch->bfd_arch_info->printable_name);
/* Find the existing arch in the list. */
for (list = ®o->arches;
/* It's a new architecture. */
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "find_arch_by_info: "
- "New architecture 0x%08lx (%s) selected\n",
- (long) new_gdbarch,
+ "New architecture %s (%s) selected\n",
+ host_address_to_string (new_gdbarch),
new_gdbarch->bfd_arch_info->printable_name);
/* Insert the new architecture into the front of the architecture
gdb_assert (current_gdbarch != NULL);
gdb_assert (new_gdbarch->initialized_p);
current_gdbarch = new_gdbarch;
- architecture_changed_event ();
- reinit_frame_cache ();
+ target_gdbarch = new_gdbarch;
+ observer_notify_architecture_changed (new_gdbarch);
+ registers_changed ();
}
extern void _initialize_gdbarch (void);
projects / deliverable / binutils-gdb.git / blobdiff