# Architecture commands for GDB, the GNU debugger.
#
-# Copyright (C) 1998-2012 Free Software Foundation, Inc.
+# Copyright (C) 1998-2014 Free Software Foundation, Inc.
#
# This file is part of GDB.
#
{
comment=""
class=""
- while read line
+ # On some SH's, 'read' trims leading and trailing whitespace by
+ # default (e.g., bash), while on others (e.g., dash), it doesn't.
+ # Set IFS to empty to disable the trimming everywhere.
+ while IFS='' read line
do
if test "${line}" = ""
then
cat <<EOF
i:const struct bfd_arch_info *:bfd_arch_info:::&bfd_default_arch_struct::::gdbarch_bfd_arch_info (gdbarch)->printable_name
#
-i:int:byte_order:::BFD_ENDIAN_BIG
-i:int:byte_order_for_code:::BFD_ENDIAN_BIG
+i:enum bfd_endian:byte_order:::BFD_ENDIAN_BIG
+i:enum bfd_endian:byte_order_for_code:::BFD_ENDIAN_BIG
#
i:enum gdb_osabi:osabi:::GDB_OSABI_UNKNOWN
#
# use "register_type".
M:struct type *:register_type:int reg_nr:reg_nr
-# See gdbint.texinfo, and PUSH_DUMMY_CALL.
M:struct frame_id:dummy_id:struct frame_info *this_frame:this_frame
# Implement DUMMY_ID and PUSH_DUMMY_CALL, then delete
# deprecated_fp_regnum.
v:int:deprecated_fp_regnum:::-1:-1::0
-# See gdbint.texinfo. See infcall.c.
M:CORE_ADDR:push_dummy_call:struct value *function, struct regcache *regcache, CORE_ADDR bp_addr, int nargs, struct value **args, CORE_ADDR sp, int struct_return, CORE_ADDR struct_addr:function, regcache, bp_addr, nargs, args, sp, struct_return, struct_addr
v:int:call_dummy_location::::AT_ENTRY_POINT::0
M:CORE_ADDR:push_dummy_code:CORE_ADDR sp, CORE_ADDR funaddr, struct value **args, int nargs, struct type *value_type, CORE_ADDR *real_pc, CORE_ADDR *bp_addr, struct regcache *regcache:sp, funaddr, args, nargs, value_type, real_pc, bp_addr, regcache
m:int:register_sim_regno:int reg_nr:reg_nr::legacy_register_sim_regno::0
m:int:cannot_fetch_register:int regnum:regnum::cannot_register_not::0
m:int:cannot_store_register:int regnum:regnum::cannot_register_not::0
-# setjmp/longjmp support.
+
+# Determine the address where a longjmp will land and save this address
+# in PC. Return nonzero on success.
+#
+# FRAME corresponds to the longjmp frame.
F:int:get_longjmp_target:struct frame_info *frame, CORE_ADDR *pc:frame, pc
+
#
v:int:believe_pcc_promotion:::::::
#
m:void:address_to_pointer:struct type *type, gdb_byte *buf, CORE_ADDR addr:type, buf, addr::unsigned_address_to_pointer::0
M:CORE_ADDR:integer_to_address:struct type *type, const gdb_byte *buf:type, buf
-# Return the return-value convention that will be used by FUNCTYPE
-# to return a value of type VALTYPE. FUNCTYPE may be NULL in which
+# Return the return-value convention that will be used by FUNCTION
+# to return a value of type VALTYPE. FUNCTION may be NULL in which
# case the return convention is computed based only on VALTYPE.
#
# If READBUF is not NULL, extract the return value and save it in this buffer.
# stored into the appropriate register. This can be used when we want
# to force the value returned by a function (see the "return" command
# for instance).
-M:enum return_value_convention:return_value:struct type *functype, struct type *valtype, struct regcache *regcache, gdb_byte *readbuf, const gdb_byte *writebuf:functype, valtype, regcache, readbuf, writebuf
+M:enum return_value_convention:return_value:struct value *function, struct type *valtype, struct regcache *regcache, gdb_byte *readbuf, const gdb_byte *writebuf:function, valtype, regcache, readbuf, writebuf
+
+# Return true if the return value of function is stored in the first hidden
+# parameter. In theory, this feature should be language-dependent, specified
+# by language and its ABI, such as C++. Unfortunately, compiler may
+# implement it to a target-dependent feature. So that we need such hook here
+# to be aware of this in GDB.
+m:int:return_in_first_hidden_param_p:struct type *type:type::default_return_in_first_hidden_param_p::0
m:CORE_ADDR:skip_prologue:CORE_ADDR ip:ip:0:0
M:CORE_ADDR:skip_main_prologue:CORE_ADDR ip:ip
# sort of generic thing to handle alignment or segmentation (it's
# possible it should be in TARGET_READ_PC instead).
m:CORE_ADDR:addr_bits_remove:CORE_ADDR addr:addr::core_addr_identity::0
-# It is not at all clear why gdbarch_smash_text_address is not folded into
-# gdbarch_addr_bits_remove.
-m:CORE_ADDR:smash_text_address:CORE_ADDR addr:addr::core_addr_identity::0
# FIXME/cagney/2001-01-18: This should be split in two. A target method that
# indicates if the target needs software single step. An ISA method to
# FIXME/cagney/2001-01-18: The logic is backwards. It should be asking if the
# target can single step. If not, then implement single step using breakpoints.
#
-# A return value of 1 means that the software_single_step breakpoints
+# A return value of 1 means that the software_single_step breakpoints
# were inserted; 0 means they were not.
F:int:software_single_step:struct frame_info *frame:frame
# a step-resume breakpoint to get us past the dynamic linker.
m:CORE_ADDR:skip_solib_resolver:CORE_ADDR pc:pc::generic_skip_solib_resolver::0
# Some systems also have trampoline code for returning from shared libs.
-m:int:in_solib_return_trampoline:CORE_ADDR pc, char *name:pc, name::generic_in_solib_return_trampoline::0
+m:int:in_solib_return_trampoline:CORE_ADDR pc, const char *name:pc, name::generic_in_solib_return_trampoline::0
# A target might have problems with watchpoints as soon as the stack
# frame of the current function has been destroyed. This mostly happens
# Supported register notes in a core file.
v:struct core_regset_section *:core_regset_sections:const char *name, int len::::::host_address_to_string (gdbarch->core_regset_sections)
+# Create core file notes
+M:char *:make_corefile_notes:bfd *obfd, int *note_size:obfd, note_size
+
+# The elfcore writer hook to use to write Linux prpsinfo notes to core
+# files. Most Linux architectures use the same prpsinfo32 or
+# prpsinfo64 layouts, and so won't need to provide this hook, as we
+# call the Linux generic routines in bfd to write prpsinfo notes by
+# default.
+F:char *:elfcore_write_linux_prpsinfo:bfd *obfd, char *note_data, int *note_size, const struct elf_internal_linux_prpsinfo *info:obfd, note_data, note_size, info
+
+# Find core file memory regions
+M:int:find_memory_regions:find_memory_region_ftype func, void *data:func, data
+
# Read offset OFFSET of TARGET_OBJECT_LIBRARIES formatted shared libraries list from
# core file into buffer READBUF with length LEN.
-M:LONGEST:core_xfer_shared_libraries:gdb_byte *readbuf, ULONGEST offset, LONGEST len:readbuf, offset, len
+M:LONGEST:core_xfer_shared_libraries:gdb_byte *readbuf, ULONGEST offset, ULONGEST len:readbuf, offset, len
+
+# Read offset OFFSET of TARGET_OBJECT_LIBRARIES_AIX formatted shared
+# libraries list from core file into buffer READBUF with length LEN.
+M:LONGEST:core_xfer_shared_libraries_aix:gdb_byte *readbuf, ULONGEST offset, ULONGEST len:readbuf, offset, len
# How the core target converts a PTID from a core file to a string.
M:char *:core_pid_to_str:ptid_t ptid:ptid
M:const struct target_desc *:core_read_description:struct target_ops *target, bfd *abfd:target, abfd
# Handle special encoding of static variables in stabs debug info.
-F:char *:static_transform_name:char *name:name
+F:const char *:static_transform_name:const char *name:name
# Set if the address in N_SO or N_FUN stabs may be zero.
v:int:sofun_address_maybe_missing:::0:0::0
# Save process state after a signal.
# Return -1 if something goes wrong, 0 otherwise.
-M:int:process_record_signal:struct regcache *regcache, enum target_signal signal:regcache, signal
-
-# Signal translation: translate inferior's signal (host's) number into
-# GDB's representation.
-m:enum target_signal:target_signal_from_host:int signo:signo::default_target_signal_from_host::0
-# Signal translation: translate GDB's signal number into inferior's host
-# signal number.
-m:int:target_signal_to_host:enum target_signal ts:ts::default_target_signal_to_host::0
+M:int:process_record_signal:struct regcache *regcache, enum gdb_signal signal:regcache, signal
+
+# Signal translation: translate inferior's signal (target's) number
+# into GDB's representation. The implementation of this method must
+# be host independent. IOW, don't rely on symbols of the NAT_FILE
+# header (the nm-*.h files), the host <signal.h> header, or similar
+# headers. This is mainly used when cross-debugging core files ---
+# "Live" targets hide the translation behind the target interface
+# (target_wait, target_resume, etc.).
+M:enum gdb_signal:gdb_signal_from_target:int signo:signo
+
+# Signal translation: translate the GDB's internal signal number into
+# the inferior's signal (target's) representation. The implementation
+# of this method must be host independent. IOW, don't rely on symbols
+# of the NAT_FILE header (the nm-*.h files), the host <signal.h>
+# header, or similar headers.
+# Return the target signal number if found, or -1 if the GDB internal
+# signal number is invalid.
+M:int:gdb_signal_to_target:enum gdb_signal signal:signal
# Extra signal info inspection.
#
# Get architecture-specific system calls information from registers.
M:LONGEST:get_syscall_number:ptid_t ptid:ptid
+# SystemTap related fields and functions.
+
+# A NULL-terminated array of prefixes used to mark an integer constant
+# on the architecture's assembly.
+# For example, on x86 integer constants are written as:
+#
+# \$10 ;; integer constant 10
+#
+# in this case, this prefix would be the character \`\$\'.
+v:const char *const *:stap_integer_prefixes:::0:0::0:pstring_list (gdbarch->stap_integer_prefixes)
+
+# A NULL-terminated array of suffixes used to mark an integer constant
+# on the architecture's assembly.
+v:const char *const *:stap_integer_suffixes:::0:0::0:pstring_list (gdbarch->stap_integer_suffixes)
+
+# A NULL-terminated array of prefixes used to mark a register name on
+# the architecture's assembly.
+# For example, on x86 the register name is written as:
+#
+# \%eax ;; register eax
+#
+# in this case, this prefix would be the character \`\%\'.
+v:const char *const *:stap_register_prefixes:::0:0::0:pstring_list (gdbarch->stap_register_prefixes)
+
+# A NULL-terminated array of suffixes used to mark a register name on
+# the architecture's assembly.
+v:const char *const *:stap_register_suffixes:::0:0::0:pstring_list (gdbarch->stap_register_suffixes)
+
+# A NULL-terminated array of prefixes used to mark a register
+# indirection on the architecture's assembly.
+# For example, on x86 the register indirection is written as:
+#
+# \(\%eax\) ;; indirecting eax
+#
+# in this case, this prefix would be the charater \`\(\'.
+#
+# Please note that we use the indirection prefix also for register
+# displacement, e.g., \`4\(\%eax\)\' on x86.
+v:const char *const *:stap_register_indirection_prefixes:::0:0::0:pstring_list (gdbarch->stap_register_indirection_prefixes)
+
+# A NULL-terminated array of suffixes used to mark a register
+# indirection on the architecture's assembly.
+# For example, on x86 the register indirection is written as:
+#
+# \(\%eax\) ;; indirecting eax
+#
+# in this case, this prefix would be the charater \`\)\'.
+#
+# Please note that we use the indirection suffix also for register
+# displacement, e.g., \`4\(\%eax\)\' on x86.
+v:const char *const *:stap_register_indirection_suffixes:::0:0::0:pstring_list (gdbarch->stap_register_indirection_suffixes)
+
+# Prefix(es) used to name a register using GDB's nomenclature.
+#
+# For example, on PPC a register is represented by a number in the assembly
+# language (e.g., \`10\' is the 10th general-purpose register). However,
+# inside GDB this same register has an \`r\' appended to its name, so the 10th
+# register would be represented as \`r10\' internally.
+v:const char *:stap_gdb_register_prefix:::0:0::0:pstring (gdbarch->stap_gdb_register_prefix)
+
+# Suffix used to name a register using GDB's nomenclature.
+v:const char *:stap_gdb_register_suffix:::0:0::0:pstring (gdbarch->stap_gdb_register_suffix)
+
+# Check if S is a single operand.
+#
+# Single operands can be:
+# \- Literal integers, e.g. \`\$10\' on x86
+# \- Register access, e.g. \`\%eax\' on x86
+# \- Register indirection, e.g. \`\(\%eax\)\' on x86
+# \- Register displacement, e.g. \`4\(\%eax\)\' on x86
+#
+# This function should check for these patterns on the string
+# and return 1 if some were found, or zero otherwise. Please try to match
+# as much info as you can from the string, i.e., if you have to match
+# something like \`\(\%\', do not match just the \`\(\'.
+M:int:stap_is_single_operand:const char *s:s
+
+# Function used to handle a "special case" in the parser.
+#
+# A "special case" is considered to be an unknown token, i.e., a token
+# that the parser does not know how to parse. A good example of special
+# case would be ARM's register displacement syntax:
+#
+# [R0, #4] ;; displacing R0 by 4
+#
+# Since the parser assumes that a register displacement is of the form:
+#
+# <number> <indirection_prefix> <register_name> <indirection_suffix>
+#
+# it means that it will not be able to recognize and parse this odd syntax.
+# Therefore, we should add a special case function that will handle this token.
+#
+# This function should generate the proper expression form of the expression
+# using GDB\'s internal expression mechanism (e.g., \`write_exp_elt_opcode\'
+# and so on). It should also return 1 if the parsing was successful, or zero
+# if the token was not recognized as a special token (in this case, returning
+# zero means that the special parser is deferring the parsing to the generic
+# parser), and should advance the buffer pointer (p->arg).
+M:int:stap_parse_special_token:struct stap_parse_info *p:p
+
+
# True if the list of shared libraries is one and only for all
# processes, as opposed to a list of shared libraries per inferior.
# This usually means that all processes, although may or may not share
# Implement the "info proc" command.
M:void:info_proc:char *args, enum info_proc_what what:args, what
+# Implement the "info proc" command for core files. Noe that there
+# are two "info_proc"-like methods on gdbarch -- one for core files,
+# one for live targets.
+M:void:core_info_proc:char *args, enum info_proc_what what:args, what
+
+# Iterate over all objfiles in the order that makes the most sense
+# for the architecture to make global symbol searches.
+#
+# CB is a callback function where OBJFILE is the objfile to be searched,
+# and CB_DATA a pointer to user-defined data (the same data that is passed
+# when calling this gdbarch method). The iteration stops if this function
+# returns nonzero.
+#
+# CB_DATA is a pointer to some user-defined data to be passed to
+# the callback.
+#
+# If not NULL, CURRENT_OBJFILE corresponds to the objfile being
+# inspected when the symbol search was requested.
+m:void:iterate_over_objfiles_in_search_order:iterate_over_objfiles_in_search_order_cb_ftype *cb, void *cb_data, struct objfile *current_objfile:cb, cb_data, current_objfile:0:default_iterate_over_objfiles_in_search_order::0
+
+# Ravenscar arch-dependent ops.
+v:struct ravenscar_arch_ops *:ravenscar_ops:::NULL:NULL::0:host_address_to_string (gdbarch->ravenscar_ops)
+
+# Return non-zero if the instruction at ADDR is a call; zero otherwise.
+m:int:insn_is_call:CORE_ADDR addr:addr::default_insn_is_call::0
+
+# Return non-zero if the instruction at ADDR is a return; zero otherwise.
+m:int:insn_is_ret:CORE_ADDR addr:addr::default_insn_is_ret::0
+
+# Return non-zero if the instruction at ADDR is a jump; zero otherwise.
+m:int:insn_is_jump:CORE_ADDR addr:addr::default_insn_is_jump::0
EOF
}
copyright ()
{
cat <<EOF
-/* *INDENT-OFF* */ /* THIS FILE IS GENERATED */
+/* *INDENT-OFF* */ /* THIS FILE IS GENERATED -*- buffer-read-only: t -*- */
+/* vi:set ro: */
/* Dynamic architecture support for GDB, the GNU debugger.
- Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
- 2007, 2008, 2009 Free Software Foundation, Inc.
+ Copyright (C) 1998-2014 Free Software Foundation, Inc.
This file is part of GDB.
struct syscall;
struct agent_expr;
struct axs_value;
+struct stap_parse_info;
+struct ravenscar_arch_ops;
+struct elf_internal_linux_prpsinfo;
+
+/* The architecture associated with the inferior through the
+ connection to the target.
+
+ The architecture vector provides some information that is really a
+ property of the inferior, accessed through a particular target:
+ ptrace operations; the layout of certain RSP packets; the solib_ops
+ vector; etc. To differentiate architecture accesses to
+ per-inferior/target properties from
+ per-thread/per-frame/per-objfile properties, accesses to
+ per-inferior/target properties should be made through this
+ gdbarch. */
+
+/* This is a convenience wrapper for 'current_inferior ()->gdbarch'. */
+extern struct gdbarch *target_gdbarch (void);
+
+/* The initial, default architecture. It uses host values (for want of a better
+ choice). */
+extern struct gdbarch startup_gdbarch;
+
-/* The architecture associated with the connection to the target.
-
- The architecture vector provides some information that is really
- a property of the target: The layout of certain packets, for instance;
- or the solib_ops vector. Etc. To differentiate architecture accesses
- to per-target properties from per-thread/per-frame/per-objfile properties,
- accesses to per-target properties should be made through target_gdbarch.
-
- Eventually, when support for multiple targets is implemented in
- GDB, this global should be made target-specific. */
-extern struct gdbarch *target_gdbarch;
+/* Callback type for the 'iterate_over_objfiles_in_search_order'
+ gdbarch method. */
+
+typedef int (iterate_over_objfiles_in_search_order_cb_ftype)
+ (struct objfile *objfile, void *cb_data);
EOF
# function typedef's
const struct bfd_arch_info *bfd_arch_info;
/* Use default: BFD_ENDIAN_UNKNOWN (NB: is not ZERO). */
- int byte_order;
+ enum bfd_endian byte_order;
- int byte_order_for_code;
+ enum bfd_endian byte_order_for_code;
/* Use default: NULL (ZERO). */
bfd *abfd;
extern struct gdbarch *gdbarch_find_by_info (struct gdbarch_info info);
-/* Helper function. Set the global "target_gdbarch" to "gdbarch".
-
- FIXME: kettenis/20031124: Of the functions that follow, only
- gdbarch_from_bfd is supposed to survive. The others will
- dissappear since in the future GDB will (hopefully) be truly
- multi-arch. However, for now we're still stuck with the concept of
- a single active architecture. */
+/* Helper function. Set the target gdbarch to "gdbarch". */
-extern void deprecated_target_gdbarch_select_hack (struct gdbarch *gdbarch);
+extern void set_target_gdbarch (struct gdbarch *gdbarch);
/* Register per-architecture data-pointer.
extern void initialize_current_architecture (void);
/* gdbarch trace variable */
-extern int gdbarch_debug;
+extern unsigned int gdbarch_debug;
extern void gdbarch_dump (struct gdbarch *gdbarch, struct ui_file *file);
#include "floatformat.h"
#include "gdb_assert.h"
-#include "gdb_string.h"
+#include <string.h>
#include "reggroups.h"
#include "osabi.h"
#include "gdb_obstack.h"
#include "observer.h"
#include "regcache.h"
+#include "objfiles.h"
/* Static function declarations */
#ifndef GDBARCH_DEBUG
#define GDBARCH_DEBUG 0
#endif
-int gdbarch_debug = GDBARCH_DEBUG;
+unsigned int gdbarch_debug = GDBARCH_DEBUG;
static void
show_gdbarch_debug (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
return string;
}
+/* Helper function to print a list of strings, represented as "const
+ char *const *". The list is printed comma-separated. */
+
+static char *
+pstring_list (const char *const *list)
+{
+ static char ret[100];
+ const char *const *p;
+ size_t offset = 0;
+
+ if (list == NULL)
+ return "(null)";
+
+ ret[0] = '\0';
+ for (p = list; *p != NULL && offset < sizeof (ret); ++p)
+ {
+ size_t s = xsnprintf (ret + offset, sizeof (ret) - offset, "%s, ", *p);
+ offset += 2 + s;
+ }
+
+ if (offset > 0)
+ {
+ gdb_assert (offset - 2 < sizeof (ret));
+ ret[offset - 2] = '\0';
+ }
+
+ return ret;
+}
+
EOF
# gdbarch open the gdbarch object
printf " unsigned nr_data;\n"
printf " void **data;\n"
printf "\n"
-printf " /* per-architecture swap-regions. */\n"
-printf " struct gdbarch_swap *swap;\n"
-printf "\n"
cat <<EOF
/* Multi-arch values.
cat <<EOF
/* target specific vector and its dump routine. */
NULL, NULL,
- /*per-architecture data-pointers and swap regions. */
- 0, NULL, NULL,
+ /*per-architecture data-pointers. */
+ 0, NULL,
/* Multi-arch values */
EOF
function_list | while do_read
/* startup_gdbarch() */
};
-struct gdbarch *target_gdbarch = &startup_gdbarch;
EOF
# Create a new gdbarch struct
/* Create an obstack for allocating all the per-architecture memory,
then use that to allocate the architecture vector. */
- struct obstack *obstack = XMALLOC (struct obstack);
+ struct obstack *obstack = XNEW (struct obstack);
obstack_init (obstack);
gdbarch = obstack_alloc (obstack, sizeof (*gdbarch));
memset (gdbarch, 0, sizeof (*gdbarch));
for (curr = &gdbarch_data_registry.registrations;
(*curr) != NULL;
curr = &(*curr)->next);
- (*curr) = XMALLOC (struct gdbarch_data_registration);
+ (*curr) = XNEW (struct gdbarch_data_registration);
(*curr)->next = NULL;
- (*curr)->data = XMALLOC (struct gdbarch_data);
+ (*curr)->data = XNEW (struct gdbarch_data);
(*curr)->data->index = gdbarch_data_registry.nr++;
(*curr)->data->pre_init = pre_init;
(*curr)->data->post_init = post_init;
bfd_arch_info->printable_name,
host_address_to_string (init));
/* Append it */
- (*curr) = XMALLOC (struct gdbarch_registration);
+ (*curr) = XNEW (struct gdbarch_registration);
(*curr)->bfd_architecture = bfd_architecture;
(*curr)->init = init;
(*curr)->dump_tdep = dump_tdep;
/* Insert the new architecture into the front of the architecture
list (keep the list sorted Most Recently Used). */
{
- struct gdbarch_list *this = XMALLOC (struct gdbarch_list);
+ struct gdbarch_list *this = XNEW (struct gdbarch_list);
this->next = rego->arches;
this->gdbarch = new_gdbarch;
rego->arches = this;
/* Make the specified architecture current. */
void
-deprecated_target_gdbarch_select_hack (struct gdbarch *new_gdbarch)
+set_target_gdbarch (struct gdbarch *new_gdbarch)
{
gdb_assert (new_gdbarch != NULL);
gdb_assert (new_gdbarch->initialized_p);
- target_gdbarch = new_gdbarch;
+ current_inferior ()->gdbarch = new_gdbarch;
observer_notify_architecture_changed (new_gdbarch);
registers_changed ();
}
+/* Return the current inferior's arch. */
+
+struct gdbarch *
+target_gdbarch (void)
+{
+ return current_inferior ()->gdbarch;
+}
+
extern void _initialize_gdbarch (void);
void
_initialize_gdbarch (void)
{
- add_setshow_zinteger_cmd ("arch", class_maintenance, &gdbarch_debug, _("\\
+ add_setshow_zuinteger_cmd ("arch", class_maintenance, &gdbarch_debug, _("\\
Set architecture debugging."), _("\\
Show architecture debugging."), _("\\
When non-zero, architecture debugging is enabled."),