m:int:stab_reg_to_regnum:int stab_regnr:stab_regnr::no_op_reg_to_regnum::0
# Provide a default mapping from a ecoff register number to a gdb REGNUM.
m:int:ecoff_reg_to_regnum:int ecoff_regnr:ecoff_regnr::no_op_reg_to_regnum::0
-# Provide a default mapping from a DWARF register number to a gdb REGNUM.
-m:int:dwarf_reg_to_regnum:int dwarf_regnr:dwarf_regnr::no_op_reg_to_regnum::0
# Convert from an sdb register number to an internal gdb register number.
m:int:sdb_reg_to_regnum:int sdb_regnr:sdb_regnr::no_op_reg_to_regnum::0
+# Provide a default mapping from a DWARF2 register number to a gdb REGNUM.
m:int:dwarf2_reg_to_regnum:int dwarf2_regnr:dwarf2_regnr::no_op_reg_to_regnum::0
m:const char *:register_name:int regnr:regnr::0
M:struct type *:register_type:int reg_nr:reg_nr
# See gdbint.texinfo, and PUSH_DUMMY_CALL.
-M:struct frame_id:unwind_dummy_id:struct frame_info *info:info
-# Implement UNWIND_DUMMY_ID and PUSH_DUMMY_CALL, then delete
+M:struct frame_id:dummy_id:struct frame_info *this_frame:this_frame
+# Implement DUMMY_ID and PUSH_DUMMY_CALL, then delete
# deprecated_fp_regnum.
v:int:deprecated_fp_regnum:::-1:-1::0
f:void:address_to_pointer:struct type *type, gdb_byte *buf, CORE_ADDR addr:type, buf, addr::unsigned_address_to_pointer::0
M:CORE_ADDR:integer_to_address:struct type *type, const gdb_byte *buf:type, buf
-# It has been suggested that this, well actually its predecessor,
-# should take the type/value of the function to be called and not the
-# return type. This is left as an exercise for the reader.
-
+# Return the return-value convention that will be used by FUNCTYPE
+# to return a value of type VALTYPE. FUNCTYPE may be NULL in which
+# case the return convention is computed based only on VALTYPE.
+#
+# If READBUF is not NULL, extract the return value and save it in this buffer.
+#
+# If WRITEBUF is not NULL, it contains a return value which will be
+# stored into the appropriate register. This can be used when we want
+# to force the value returned by a function (see the "return" command
+# for instance).
M:enum return_value_convention:return_value:struct type *functype, struct type *valtype, struct regcache *regcache, gdb_byte *readbuf, const gdb_byte *writebuf:functype, valtype, regcache, readbuf, writebuf
m:CORE_ADDR:skip_prologue:CORE_ADDR ip:ip:0:0
+M:CORE_ADDR:skip_main_prologue:CORE_ADDR ip:ip
f:int:inner_than:CORE_ADDR lhs, CORE_ADDR rhs:lhs, rhs:0:0
m:const gdb_byte *:breakpoint_from_pc:CORE_ADDR *pcptr, int *lenptr:pcptr, lenptr::0:
M:CORE_ADDR:adjust_breakpoint_address:CORE_ADDR bpaddr:bpaddr
f:CORE_ADDR:skip_trampoline_code:struct frame_info *frame, CORE_ADDR pc:frame, pc::generic_skip_trampoline_code::0
-# If IN_SOLIB_DYNSYM_RESOLVE_CODE returns true, and SKIP_SOLIB_RESOLVER
+# If in_solib_dynsym_resolve_code() returns true, and SKIP_SOLIB_RESOLVER
# evaluates non-zero, this is the address where the debugger will place
# a step-resume breakpoint to get us past the dynamic linker.
m:CORE_ADDR:skip_solib_resolver:CORE_ADDR pc:pc::generic_skip_solib_resolver::0
# name SECT_NAME and size SECT_SIZE.
M:const struct regset *:regset_from_core_section:const char *sect_name, size_t sect_size:sect_name, sect_size
+# Supported register notes in a core file.
+v:struct core_regset_section *:core_regset_sections:const char *name, int len::::::host_address_to_string (gdbarch->core_regset_sections)
+
# Read offset OFFSET of TARGET_OBJECT_LIBRARIES formatted shared libraries list from
# core file into buffer READBUF with length LEN.
M:LONGEST:core_xfer_shared_libraries:gdb_byte *readbuf, ULONGEST offset, LONGEST len:readbuf, offset, len
# Advance PC to next instruction in order to skip a permanent breakpoint.
F:void:skip_permanent_breakpoint:struct regcache *regcache:regcache
+# The maximum length of an instruction on this architecture.
+V:ULONGEST:max_insn_length:::0:0
+
+# Copy the instruction at FROM to TO, and make any adjustments
+# necessary to single-step it at that address.
+#
+# REGS holds the state the thread's registers will have before
+# executing the copied instruction; the PC in REGS will refer to FROM,
+# not the copy at TO. The caller should update it to point at TO later.
+#
+# Return a pointer to data of the architecture's choice to be passed
+# to gdbarch_displaced_step_fixup. Or, return NULL to indicate that
+# the instruction's effects have been completely simulated, with the
+# resulting state written back to REGS.
+#
+# For a general explanation of displaced stepping and how GDB uses it,
+# see the comments in infrun.c.
+#
+# The TO area is only guaranteed to have space for
+# gdbarch_max_insn_length (arch) bytes, so this function must not
+# write more bytes than that to that area.
+#
+# If you do not provide this function, GDB assumes that the
+# architecture does not support displaced stepping.
+#
+# If your architecture doesn't need to adjust instructions before
+# single-stepping them, consider using simple_displaced_step_copy_insn
+# here.
+M:struct displaced_step_closure *:displaced_step_copy_insn:CORE_ADDR from, CORE_ADDR to, struct regcache *regs:from, to, regs
+
+# Fix up the state resulting from successfully single-stepping a
+# displaced instruction, to give the result we would have gotten from
+# stepping the instruction in its original location.
+#
+# REGS is the register state resulting from single-stepping the
+# displaced instruction.
+#
+# CLOSURE is the result from the matching call to
+# gdbarch_displaced_step_copy_insn.
+#
+# If you provide gdbarch_displaced_step_copy_insn.but not this
+# function, then GDB assumes that no fixup is needed after
+# single-stepping the instruction.
+#
+# For a general explanation of displaced stepping and how GDB uses it,
+# see the comments in infrun.c.
+M:void:displaced_step_fixup:struct displaced_step_closure *closure, CORE_ADDR from, CORE_ADDR to, struct regcache *regs:closure, from, to, regs::NULL
+
+# Free a closure returned by gdbarch_displaced_step_copy_insn.
+#
+# If you provide gdbarch_displaced_step_copy_insn, you must provide
+# this function as well.
+#
+# If your architecture uses closures that don't need to be freed, then
+# you can use simple_displaced_step_free_closure here.
+#
+# For a general explanation of displaced stepping and how GDB uses it,
+# see the comments in infrun.c.
+m:void:displaced_step_free_closure:struct displaced_step_closure *closure:closure::NULL::(! gdbarch->displaced_step_free_closure) != (! gdbarch->displaced_step_copy_insn)
+
+# Return the address of an appropriate place to put displaced
+# instructions while we step over them. There need only be one such
+# place, since we're only stepping one thread over a breakpoint at a
+# time.
+#
+# For a general explanation of displaced stepping and how GDB uses it,
+# see the comments in infrun.c.
+m:CORE_ADDR:displaced_step_location:void:::NULL::(! gdbarch->displaced_step_location) != (! gdbarch->displaced_step_copy_insn)
+
# Refresh overlay mapped state for section OSECT.
F:void:overlay_update:struct obj_section *osect:osect
F:char *:static_transform_name:char *name:name
# Set if the address in N_SO or N_FUN stabs may be zero.
v:int:sofun_address_maybe_missing:::0:0::0
+
+# Signal translation: translate inferior's signal (host's) number into
+# GDB's representation.
+m:enum target_signal:target_signal_from_host:int signo:signo::default_target_signal_from_host::0
+# Signal translation: translate GDB's signal number into inferior's host
+# signal number.
+m:int:target_signal_to_host:enum target_signal ts:ts::default_target_signal_to_host::0
+
+# Record architecture-specific information from the symbol table.
+M:void:record_special_symbol:struct objfile *objfile, asymbol *sym:objfile, sym
EOF
}
struct obstack;
struct bp_target_info;
struct target_desc;
+struct displaced_step_closure;
+struct core_regset_section;
extern struct gdbarch *current_gdbarch;
EOF
#include "gdb_assert.h"
#include "gdb_string.h"
-#include "gdb-events.h"
#include "reggroups.h"
#include "osabi.h"
#include "gdb_obstack.h"
+#include "observer.h"
/* Static function declarations */
gdb_assert (current_gdbarch != NULL);
gdb_assert (new_gdbarch->initialized_p);
current_gdbarch = new_gdbarch;
- architecture_changed_event ();
+ observer_notify_architecture_changed (new_gdbarch);
reinit_frame_cache ();
}
projects / deliverable / binutils-gdb.git / blobdiff