#!/bin/sh -u
# Architecture commands for GDB, the GNU debugger.
-# Copyright 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+#
+# Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
+# Foundation, Inc.
+#
#
# This file is part of GDB.
#
# You cannot specify both a zero INVALID_P and a POSTDEFAULT.
- # Variable declarations can refer to ``gdbarch'' which will
- # contain the current architecture. Care should be taken.
+ # Variable declarations can refer to ``current_gdbarch'' which
+ # will contain the current architecture. Care should be
+ # taken.
invalid_p ) : ;;
v:2:PC_REGNUM:int:pc_regnum::::-1:-1::0
v:2:PS_REGNUM:int:ps_regnum::::-1:-1::0
v:2:FP0_REGNUM:int:fp0_regnum::::0:-1::0
-# Replace DEPRECATED_NPC_REGNUM with an implementation of WRITE_PC
-# that updates PC, NPC and even NNPC.
-v:2:DEPRECATED_NPC_REGNUM:int:deprecated_npc_regnum::::0:-1::0
# Convert stab register number (from \`r\' declaration) to a gdb REGNUM.
f:2:STAB_REG_TO_REGNUM:int:stab_reg_to_regnum:int stab_regnr:stab_regnr:::no_op_reg_to_regnum::0
# Provide a default mapping from a ecoff register number to a gdb REGNUM.
f:2:ADDRESS_TO_POINTER:void:address_to_pointer:struct type *type, void *buf, CORE_ADDR addr:type, buf, addr:::unsigned_address_to_pointer::0
F:2:INTEGER_TO_ADDRESS:CORE_ADDR:integer_to_address:struct type *type, void *buf:type, buf
#
-f:2:RETURN_VALUE_ON_STACK:int:return_value_on_stack:struct type *type:type:::generic_return_value_on_stack_not::0
F:2:DEPRECATED_POP_FRAME:void:deprecated_pop_frame:void:-
# NOTE: cagney/2003-03-24: Replaced by PUSH_ARGUMENTS.
F:2:DEPRECATED_STORE_STRUCT_RETURN:void:deprecated_store_struct_return:CORE_ADDR addr, CORE_ADDR sp:addr, sp
-#
+
+# It has been suggested that this, well actually its predecessor,
+# should take the type/value of the function to be called and not the
+# return type. This is left as an exercise for the reader.
+
+M:::enum return_value_convention:return_value:struct type *valtype, struct regcache *regcache, void *readbuf, const void *writebuf:valtype, regcache, readbuf, writebuf
+
+# The deprecated methods RETURN_VALUE_ON_STACK, EXTRACT_RETURN_VALUE,
+# STORE_RETURN_VALUE and USE_STRUCT_CONVENTION have all been folded
+# into RETURN_VALUE.
+
+f:2:RETURN_VALUE_ON_STACK:int:return_value_on_stack:struct type *type:type:::generic_return_value_on_stack_not::0
f:2:EXTRACT_RETURN_VALUE:void:extract_return_value:struct type *type, struct regcache *regcache, void *valbuf:type, regcache, valbuf:::legacy_extract_return_value::0
f:2:STORE_RETURN_VALUE:void:store_return_value:struct type *type, struct regcache *regcache, const void *valbuf:type, regcache, valbuf:::legacy_store_return_value::0
f:2:DEPRECATED_EXTRACT_RETURN_VALUE:void:deprecated_extract_return_value:struct type *type, char *regbuf, char *valbuf:type, regbuf, valbuf
f:2:DEPRECATED_STORE_RETURN_VALUE:void:deprecated_store_return_value:struct type *type, char *valbuf:type, valbuf
-#
-F:2:EXTRACT_STRUCT_VALUE_ADDRESS:CORE_ADDR:extract_struct_value_address:struct regcache *regcache:regcache
-F:2:DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS:CORE_ADDR:deprecated_extract_struct_value_address:char *regbuf:regbuf
f:2:USE_STRUCT_CONVENTION:int:use_struct_convention:int gcc_p, struct type *value_type:gcc_p, value_type:::generic_use_struct_convention::0
-#
+
+# As of 2004-01-17 only the 32-bit SPARC ABI has been identified as an
+# ABI suitable for the implementation of a robust extract
+# struct-convention return-value address method (the sparc saves the
+# address in the callers frame). All the other cases so far examined,
+# the DEPRECATED_EXTRACT_STRUCT_VALUE implementation has been
+# erreneous - the code was incorrectly assuming that the return-value
+# address, stored in a register, was preserved across the entire
+# function call.
+
+# For the moment retain DEPRECATED_EXTRACT_STRUCT_VALUE as a marker of
+# the ABIs that are still to be analyzed - perhaps this should simply
+# be deleted. The commented out extract_returned_value_address method
+# is provided as a starting point for the 32-bit SPARC. It, or
+# something like it, along with changes to both infcmd.c and stack.c
+# will be needed for that case to work. NB: It is passed the callers
+# frame since it is only after the callee has returned that this
+# function is used.
+
+#M:::CORE_ADDR:extract_returned_value_address:struct frame_info *caller_frame:caller_frame
+F:2:DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS:CORE_ADDR:deprecated_extract_struct_value_address:struct regcache *regcache:regcache
+
F:2:DEPRECATED_FRAME_INIT_SAVED_REGS:void:deprecated_frame_init_saved_regs:struct frame_info *frame:frame
F:2:DEPRECATED_INIT_EXTRA_FRAME_INFO:void:deprecated_init_extra_frame_info:int fromleaf, struct frame_info *frame:fromleaf, frame
#
f:2:PROLOGUE_FRAMELESS_P:int:prologue_frameless_p:CORE_ADDR ip:ip::0:generic_prologue_frameless_p::0
f:2:INNER_THAN:int:inner_than:CORE_ADDR lhs, CORE_ADDR rhs:lhs, rhs::0:0
f::BREAKPOINT_FROM_PC:const unsigned char *:breakpoint_from_pc:CORE_ADDR *pcptr, int *lenptr:pcptr, lenptr:::0:
+M:2:ADJUST_BREAKPOINT_ADDRESS:CORE_ADDR:adjust_breakpoint_address:CORE_ADDR bpaddr:bpaddr
f:2:MEMORY_INSERT_BREAKPOINT:int:memory_insert_breakpoint:CORE_ADDR addr, char *contents_cache:addr, contents_cache::0:default_memory_insert_breakpoint::0
f:2:MEMORY_REMOVE_BREAKPOINT:int:memory_remove_breakpoint:CORE_ADDR addr, char *contents_cache:addr, contents_cache::0:default_memory_remove_breakpoint::0
-v:2:DECR_PC_AFTER_BREAK:CORE_ADDR:decr_pc_after_break::::0:-1
-v:2:FUNCTION_START_OFFSET:CORE_ADDR:function_start_offset::::0:-1
+v:2:DECR_PC_AFTER_BREAK:CORE_ADDR:decr_pc_after_break::::0:::0
+v:2:FUNCTION_START_OFFSET:CORE_ADDR:function_start_offset::::0:::0
#
m::REMOTE_TRANSLATE_XFER_ADDRESS:void:remote_translate_xfer_address:struct regcache *regcache, CORE_ADDR gdb_addr, int gdb_len, CORE_ADDR *rem_addr, int *rem_len:regcache, gdb_addr, gdb_len, rem_addr, rem_len:::generic_remote_translate_xfer_address::0
#
v::FRAME_RED_ZONE_SIZE:int:frame_red_zone_size
v:2:PARM_BOUNDARY:int:parm_boundary
#
-v:2:TARGET_FLOAT_FORMAT:const struct floatformat *:float_format::::::default_float_format (gdbarch)::%s:(TARGET_FLOAT_FORMAT)->name
-v:2:TARGET_DOUBLE_FORMAT:const struct floatformat *:double_format::::::default_double_format (gdbarch)::%s:(TARGET_DOUBLE_FORMAT)->name
-v:2:TARGET_LONG_DOUBLE_FORMAT:const struct floatformat *:long_double_format::::::default_double_format (gdbarch)::%s:(TARGET_LONG_DOUBLE_FORMAT)->name
-f:2:CONVERT_FROM_FUNC_PTR_ADDR:CORE_ADDR:convert_from_func_ptr_addr:CORE_ADDR addr:addr:::core_addr_identity::0
+v:2:TARGET_FLOAT_FORMAT:const struct floatformat *:float_format::::::default_float_format (current_gdbarch)::%s:(TARGET_FLOAT_FORMAT)->name
+v:2:TARGET_DOUBLE_FORMAT:const struct floatformat *:double_format::::::default_double_format (current_gdbarch)::%s:(TARGET_DOUBLE_FORMAT)->name
+v:2:TARGET_LONG_DOUBLE_FORMAT:const struct floatformat *:long_double_format::::::default_double_format (current_gdbarch)::%s:(TARGET_LONG_DOUBLE_FORMAT)->name
+m:::CORE_ADDR:convert_from_func_ptr_addr:CORE_ADDR addr, struct target_ops *targ:addr, targ:::convert_from_func_ptr_addr_identity::0
# On some machines there are bits in addresses which are not really
# part of the address, but are used by the kernel, the hardware, etc.
# for special purposes. ADDR_BITS_REMOVE takes out any such bits so
f:2:SKIP_TRAMPOLINE_CODE:CORE_ADDR:skip_trampoline_code:CORE_ADDR pc:pc:::generic_skip_trampoline_code::0
+# If IN_SOLIB_DYNSYM_RESOLVE_CODE returns true, and SKIP_SOLIB_RESOLVER
+# evaluates non-zero, this is the address where the debugger will place
+# a step-resume breakpoint to get us past the dynamic linker.
+m:2:SKIP_SOLIB_RESOLVER:CORE_ADDR:skip_solib_resolver:CORE_ADDR pc:pc:::generic_skip_solib_resolver::0
# For SVR4 shared libraries, each call goes through a small piece of
# trampoline code in the ".plt" section. IN_SOLIB_CALL_TRAMPOLINE evaluates
# to nonzero if we are currently stopped in one of these.
m:::int:register_reggroup_p:int regnum, struct reggroup *reggroup:regnum, reggroup:::default_register_reggroup_p::0
# Fetch the pointer to the ith function argument.
F::FETCH_POINTER_ARGUMENT:CORE_ADDR:fetch_pointer_argument:struct frame_info *frame, int argi, struct type *type:frame, argi, type
+
+# Return the appropriate register set for a core file section with
+# name SECT_NAME and size SECT_SIZE.
+M:::const struct regset *:regset_from_core_section:const char *sect_name, size_t sect_size:sect_name, sect_size
EOF
}
/* *INDENT-OFF* */ /* THIS FILE IS GENERATED */
/* Dynamic architecture support for GDB, the GNU debugger.
- Copyright 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+ Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free
+ Software Foundation, Inc.
This file is part of GDB.
struct minimal_symbol;
struct regcache;
struct reggroup;
+struct regset;
struct disassemble_info;
+struct target_ops;
extern struct gdbarch *current_gdbarch;
extern int gdbarch_update_p (struct gdbarch_info info);
+/* Helper function. Find an architecture matching info.
+
+ INFO should be initialized using gdbarch_info_init, relevant fields
+ set, and then finished using gdbarch_info_fill.
+
+ Returns the corresponding architecture, or NULL if no matching
+ architecture was found. "current_gdbarch" is not updated. */
+
+extern struct gdbarch *gdbarch_find_by_info (struct gdbarch_info info);
+
+
+/* Helper function. Set the global "current_gdbarch" to "gdbarch".
+
+ FIXME: kettenis/20031124: Of the functions that follow, only
+ gdbarch_from_bfd is supposed to survive. The others will
+ dissappear since in the future GDB will (hopefully) be truly
+ multi-arch. However, for now we're still stuck with the concept of
+ a single active architecture. */
+
+extern void deprecated_current_gdbarch_select_hack (struct gdbarch *gdbarch);
+
/* Register per-architecture data-pointer.
extern void *gdbarch_data (struct gdbarch *gdbarch, struct gdbarch_data *);
+
/* Register per-architecture memory region.
Provide a memory-region swap mechanism. Per-architecture memory
-/* The target-system-dependent byte order is dynamic */
-
-extern int target_byte_order;
-#ifndef TARGET_BYTE_ORDER
-#define TARGET_BYTE_ORDER (target_byte_order + 0)
-#endif
-
-extern int target_byte_order_auto;
-#ifndef TARGET_BYTE_ORDER_AUTO
-#define TARGET_BYTE_ORDER_AUTO (target_byte_order_auto + 0)
-#endif
-
-
-
-/* The target-system-dependent BFD architecture is dynamic */
-
-extern int target_architecture_auto;
-#ifndef TARGET_ARCHITECTURE_AUTO
-#define TARGET_ARCHITECTURE_AUTO (target_architecture_auto + 0)
-#endif
-
-extern const struct bfd_arch_info *target_architecture;
-#ifndef TARGET_ARCHITECTURE
-#define TARGET_ARCHITECTURE (target_architecture + 0)
-#endif
-
-
/* Set the dynamic target-system-dependent parameters (architecture,
byte-order, ...) using information found in the BFD */
extern void initialize_current_architecture (void);
-/* For non-multiarched targets, do any initialization of the default
- gdbarch object necessary after the _initialize_MODULE functions
- have run. */
-extern void initialize_non_multiarch (void);
-
/* gdbarch trace variable */
extern int gdbarch_debug;
/* Static function declarations */
-static void verify_gdbarch (struct gdbarch *gdbarch);
static void alloc_gdbarch_data (struct gdbarch *);
-static void init_gdbarch_swap (struct gdbarch *);
-static void clear_gdbarch_swap (struct gdbarch *);
-static void swapout_gdbarch_swap (struct gdbarch *);
-static void swapin_gdbarch_swap (struct gdbarch *);
/* Non-zero if we want to trace architecture code. */
};
struct gdbarch *current_gdbarch = &startup_gdbarch;
-
-/* Do any initialization needed for a non-multiarch configuration
- after the _initialize_MODULE functions have been run. */
-void
-initialize_non_multiarch (void)
-{
- alloc_gdbarch_data (&startup_gdbarch);
- /* Ensure that all swap areas are zeroed so that they again think
- they are starting from scratch. */
- clear_gdbarch_swap (&startup_gdbarch);
- init_gdbarch_swap (&startup_gdbarch);
-}
EOF
# Create a new gdbarch struct
-printf "\n"
-printf "\n"
cat <<EOF
+
/* Create a new \`\`struct gdbarch'' based on information provided by
\`\`struct gdbarch_info''. */
EOF
EOF
# verify a new architecture
-printf "\n"
-printf "\n"
-printf "/* Ensure that all values in a GDBARCH are reasonable. */\n"
-printf "\n"
cat <<EOF
+
+
+/* Ensure that all values in a GDBARCH are reasonable. */
+
+/* NOTE/WARNING: The parameter is called \`\`current_gdbarch'' so that it
+ just happens to match the global variable \`\`current_gdbarch''. That
+ way macros refering to that variable get the local and not the global
+ version - ulgh. Once everything is parameterised with gdbarch, this
+ will go away. */
+
static void
-verify_gdbarch (struct gdbarch *gdbarch)
+verify_gdbarch (struct gdbarch *current_gdbarch)
{
struct ui_file *log;
struct cleanup *cleanups;
log = mem_fileopen ();
cleanups = make_cleanup_ui_file_delete (log);
/* fundamental */
- if (gdbarch->byte_order == BFD_ENDIAN_UNKNOWN)
+ if (current_gdbarch->byte_order == BFD_ENDIAN_UNKNOWN)
fprintf_unfiltered (log, "\n\tbyte-order");
- if (gdbarch->bfd_arch_info == NULL)
+ if (current_gdbarch->bfd_arch_info == NULL)
fprintf_unfiltered (log, "\n\tbfd_arch_info");
/* Check those that need to be defined for the given multi-arch level. */
EOF
elif [ -n "${invalid_p}" -a -n "${postdefault}" ]
then
printf " if (${invalid_p})\n"
- printf " gdbarch->${function} = ${postdefault};\n"
+ printf " current_gdbarch->${function} = ${postdefault};\n"
elif [ -n "${predefault}" -a -n "${postdefault}" ]
then
- printf " if (gdbarch->${function} == ${predefault})\n"
- printf " gdbarch->${function} = ${postdefault};\n"
+ printf " if (current_gdbarch->${function} == ${predefault})\n"
+ printf " current_gdbarch->${function} = ${postdefault};\n"
elif [ -n "${postdefault}" ]
then
- printf " if (gdbarch->${function} == 0)\n"
- printf " gdbarch->${function} = ${postdefault};\n"
+ printf " if (current_gdbarch->${function} == 0)\n"
+ printf " current_gdbarch->${function} = ${postdefault};\n"
elif [ -n "${invalid_p}" ]
then
printf " if ((GDB_MULTI_ARCH ${gt_level})\n"
elif [ -n "${predefault}" ]
then
printf " if ((GDB_MULTI_ARCH ${gt_level})\n"
- printf " && (gdbarch->${function} == ${predefault}))\n"
+ printf " && (current_gdbarch->${function} == ${predefault}))\n"
printf " fprintf_unfiltered (log, \"\\\\n\\\\t${function}\");\n"
fi
fi
will go away. */
void
-gdbarch_dump (struct gdbarch *gdbarch, struct ui_file *file)
+gdbarch_dump (struct gdbarch *current_gdbarch, struct ui_file *file)
{
fprintf_unfiltered (file,
"gdbarch_dump: GDB_MULTI_ARCH = %d\\n",
}
static void
-clear_gdbarch_swap (struct gdbarch *gdbarch)
-{
- struct gdbarch_swap *curr;
- for (curr = gdbarch->swap;
- curr != NULL;
- curr = curr->next)
- {
- memset (curr->source->data, 0, curr->source->sizeof_data);
- }
-}
-
-static void
-init_gdbarch_swap (struct gdbarch *gdbarch)
+current_gdbarch_swap_init_hack (void)
{
struct gdbarch_swap_registration *rego;
- struct gdbarch_swap **curr = &gdbarch->swap;
+ struct gdbarch_swap **curr = ¤t_gdbarch->swap;
for (rego = gdbarch_swap_registry.registrations;
rego != NULL;
rego = rego->next)
{
if (rego->data != NULL)
{
- (*curr) = GDBARCH_OBSTACK_ZALLOC (gdbarch, struct gdbarch_swap);
+ (*curr) = GDBARCH_OBSTACK_ZALLOC (current_gdbarch,
+ struct gdbarch_swap);
(*curr)->source = rego;
- (*curr)->swap = gdbarch_obstack_zalloc (gdbarch, rego->sizeof_data);
+ (*curr)->swap = gdbarch_obstack_zalloc (current_gdbarch,
+ rego->sizeof_data);
(*curr)->next = NULL;
curr = &(*curr)->next;
}
}
}
-static void
-swapout_gdbarch_swap (struct gdbarch *gdbarch)
+static struct gdbarch *
+current_gdbarch_swap_out_hack (void)
{
+ struct gdbarch *old_gdbarch = current_gdbarch;
struct gdbarch_swap *curr;
- for (curr = gdbarch->swap;
+
+ gdb_assert (old_gdbarch != NULL);
+ for (curr = old_gdbarch->swap;
curr != NULL;
curr = curr->next)
- memcpy (curr->swap, curr->source->data, curr->source->sizeof_data);
+ {
+ memcpy (curr->swap, curr->source->data, curr->source->sizeof_data);
+ memset (curr->source->data, 0, curr->source->sizeof_data);
+ }
+ current_gdbarch = NULL;
+ return old_gdbarch;
}
static void
-swapin_gdbarch_swap (struct gdbarch *gdbarch)
+current_gdbarch_swap_in_hack (struct gdbarch *new_gdbarch)
{
struct gdbarch_swap *curr;
- for (curr = gdbarch->swap;
+
+ gdb_assert (current_gdbarch == NULL);
+ for (curr = new_gdbarch->swap;
curr != NULL;
curr = curr->next)
memcpy (curr->source->data, curr->swap, curr->source->sizeof_data);
+ current_gdbarch = new_gdbarch;
}
}
-/* Update the current architecture. Return ZERO if the update request
- failed. */
+/* Find an architecture that matches the specified INFO. Create a new
+ architecture if needed. Return that new architecture. Assumes
+ that there is no current architecture. */
-int
-gdbarch_update_p (struct gdbarch_info info)
+static struct gdbarch *
+find_arch_by_info (struct gdbarch *old_gdbarch, struct gdbarch_info info)
{
struct gdbarch *new_gdbarch;
- struct gdbarch *old_gdbarch;
struct gdbarch_registration *rego;
+ /* The existing architecture has been swapped out - all this code
+ works from a clean slate. */
+ gdb_assert (current_gdbarch == NULL);
+
/* Fill in missing parts of the INFO struct using a number of
- sources: \`\`set ...''; INFOabfd supplied; existing target. */
-
- /* \`\`(gdb) set architecture ...'' */
- if (info.bfd_arch_info == NULL
- && !TARGET_ARCHITECTURE_AUTO)
- info.bfd_arch_info = TARGET_ARCHITECTURE;
- if (info.bfd_arch_info == NULL
- && info.abfd != NULL
- && bfd_get_arch (info.abfd) != bfd_arch_unknown
- && bfd_get_arch (info.abfd) != bfd_arch_obscure)
- info.bfd_arch_info = bfd_get_arch_info (info.abfd);
- if (info.bfd_arch_info == NULL)
- info.bfd_arch_info = TARGET_ARCHITECTURE;
-
- /* \`\`(gdb) set byte-order ...'' */
- if (info.byte_order == BFD_ENDIAN_UNKNOWN
- && !TARGET_BYTE_ORDER_AUTO)
- info.byte_order = TARGET_BYTE_ORDER;
- /* From the INFO struct. */
- if (info.byte_order == BFD_ENDIAN_UNKNOWN
- && info.abfd != NULL)
- info.byte_order = (bfd_big_endian (info.abfd) ? BFD_ENDIAN_BIG
- : bfd_little_endian (info.abfd) ? BFD_ENDIAN_LITTLE
- : BFD_ENDIAN_UNKNOWN);
- /* From the current target. */
- if (info.byte_order == BFD_ENDIAN_UNKNOWN)
- info.byte_order = TARGET_BYTE_ORDER;
-
- /* \`\`(gdb) set osabi ...'' is handled by gdbarch_lookup_osabi. */
- if (info.osabi == GDB_OSABI_UNINITIALIZED)
- info.osabi = gdbarch_lookup_osabi (info.abfd);
- if (info.osabi == GDB_OSABI_UNINITIALIZED)
- info.osabi = current_gdbarch->osabi;
+ sources: "set ..."; INFOabfd supplied; and the existing
+ architecture. */
+ gdbarch_info_fill (old_gdbarch, &info);
/* Must have found some sort of architecture. */
gdb_assert (info.bfd_arch_info != NULL);
if (gdbarch_debug)
{
fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: info.bfd_arch_info %s\n",
+ "find_arch_by_info: info.bfd_arch_info %s\n",
(info.bfd_arch_info != NULL
? info.bfd_arch_info->printable_name
: "(null)"));
fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: info.byte_order %d (%s)\n",
+ "find_arch_by_info: info.byte_order %d (%s)\n",
info.byte_order,
(info.byte_order == BFD_ENDIAN_BIG ? "big"
: info.byte_order == BFD_ENDIAN_LITTLE ? "little"
: "default"));
fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: info.osabi %d (%s)\n",
+ "find_arch_by_info: info.osabi %d (%s)\n",
info.osabi, gdbarch_osabi_name (info.osabi));
fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: info.abfd 0x%lx\n",
+ "find_arch_by_info: info.abfd 0x%lx\n",
(long) info.abfd);
fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: info.tdep_info 0x%lx\n",
+ "find_arch_by_info: info.tdep_info 0x%lx\n",
(long) info.tdep_info);
}
- /* Find the target that knows about this architecture. */
+ /* Find the tdep code that knows about this architecture. */
for (rego = gdbarch_registry;
rego != NULL;
rego = rego->next)
if (rego == NULL)
{
if (gdbarch_debug)
- fprintf_unfiltered (gdb_stdlog, "gdbarch_update: No matching architecture\\n");
+ fprintf_unfiltered (gdb_stdlog, "find_arch_by_info: "
+ "No matching architecture\n");
return 0;
}
- /* Swap the data belonging to the old target out setting the
- installed data to zero. This stops the ->init() function trying
- to refer to the previous architecture's global data structures. */
- swapout_gdbarch_swap (current_gdbarch);
- clear_gdbarch_swap (current_gdbarch);
-
- /* Save the previously selected architecture, setting the global to
- NULL. This stops ->init() trying to use the previous
- architecture's configuration. The previous architecture may not
- even be of the same architecture family. The most recent
- architecture of the same family is found at the head of the
- rego->arches list. */
- old_gdbarch = current_gdbarch;
- current_gdbarch = NULL;
-
- /* Ask the target for a replacement architecture. */
+ /* Ask the tdep code for an architecture that matches "info". */
new_gdbarch = rego->init (info, rego->arches);
- /* Did the target like it? No. Reject the change and revert to the
- old architecture. */
+ /* Did the tdep code like it? No. Reject the change and revert to
+ the old architecture. */
if (new_gdbarch == NULL)
{
if (gdbarch_debug)
- fprintf_unfiltered (gdb_stdlog, "gdbarch_update: Target rejected architecture\\n");
- swapin_gdbarch_swap (old_gdbarch);
- current_gdbarch = old_gdbarch;
- return 0;
+ fprintf_unfiltered (gdb_stdlog, "find_arch_by_info: "
+ "Target rejected architecture\n");
+ return NULL;
}
- /* Did the architecture change? No. Oops, put the old architecture
- back. */
- if (old_gdbarch == new_gdbarch)
+ /* Is this a pre-existing architecture (as determined by already
+ being initialized)? Move it to the front of the architecture
+ list (keeping the list sorted Most Recently Used). */
+ if (new_gdbarch->initialized_p)
{
+ struct gdbarch_list **list;
+ struct gdbarch_list *this;
if (gdbarch_debug)
- fprintf_unfiltered (gdb_stdlog, "gdbarch_update: Architecture 0x%08lx (%s) unchanged\\n",
+ fprintf_unfiltered (gdb_stdlog, "find_arch_by_info: "
+ "Previous architecture 0x%08lx (%s) selected\n",
(long) new_gdbarch,
new_gdbarch->bfd_arch_info->printable_name);
- swapin_gdbarch_swap (old_gdbarch);
- current_gdbarch = old_gdbarch;
- return 1;
+ /* Find the existing arch in the list. */
+ for (list = ®o->arches;
+ (*list) != NULL && (*list)->gdbarch != new_gdbarch;
+ list = &(*list)->next);
+ /* It had better be in the list of architectures. */
+ gdb_assert ((*list) != NULL && (*list)->gdbarch == new_gdbarch);
+ /* Unlink THIS. */
+ this = (*list);
+ (*list) = this->next;
+ /* Insert THIS at the front. */
+ this->next = rego->arches;
+ rego->arches = this;
+ /* Return it. */
+ return new_gdbarch;
}
- /* Is this a pre-existing architecture? Yes. Move it to the front
- of the list of architectures (keeping the list sorted Most
- Recently Used) and then copy it in. */
- {
- struct gdbarch_list **list;
- for (list = ®o->arches;
- (*list) != NULL;
- list = &(*list)->next)
- {
- if ((*list)->gdbarch == new_gdbarch)
- {
- struct gdbarch_list *this;
- if (gdbarch_debug)
- fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: Previous architecture 0x%08lx (%s) selected\n",
- (long) new_gdbarch,
- new_gdbarch->bfd_arch_info->printable_name);
- /* Unlink this. */
- this = (*list);
- (*list) = this->next;
- /* Insert in the front. */
- this->next = rego->arches;
- rego->arches = this;
- /* Copy the new architecture in. */
- current_gdbarch = new_gdbarch;
- swapin_gdbarch_swap (new_gdbarch);
- architecture_changed_event ();
- return 1;
- }
- }
- }
-
- /* Prepend this new architecture to the architecture list (keep the
- list sorted Most Recently Used). */
+ /* It's a new architecture. */
+ if (gdbarch_debug)
+ fprintf_unfiltered (gdb_stdlog, "find_arch_by_info: "
+ "New architecture 0x%08lx (%s) selected\n",
+ (long) new_gdbarch,
+ new_gdbarch->bfd_arch_info->printable_name);
+
+ /* Insert the new architecture into the front of the architecture
+ list (keep the list sorted Most Recently Used). */
{
struct gdbarch_list *this = XMALLOC (struct gdbarch_list);
this->next = rego->arches;
rego->arches = this;
}
- /* Switch to this new architecture marking it initialized. */
- current_gdbarch = new_gdbarch;
- current_gdbarch->initialized_p = 1;
- if (gdbarch_debug)
- {
- fprintf_unfiltered (gdb_stdlog,
- "gdbarch_update: New architecture 0x%08lx (%s) selected\\n",
- (long) new_gdbarch,
- new_gdbarch->bfd_arch_info->printable_name);
- }
-
/* Check that the newly installed architecture is valid. Plug in
any post init values. */
new_gdbarch->dump_tdep = rego->dump_tdep;
verify_gdbarch (new_gdbarch);
+ new_gdbarch->initialized_p = 1;
- /* Initialize the per-architecture memory (swap) areas.
- CURRENT_GDBARCH must be update before these modules are
- called. */
- init_gdbarch_swap (new_gdbarch);
-
- /* Initialize the per-architecture data. CURRENT_GDBARCH
- must be updated before these modules are called. */
- architecture_changed_event ();
+ /* Initialize any per-architecture swap areas. This phase requires
+ a valid global CURRENT_GDBARCH. Set it momentarially, and then
+ swap the entire architecture out. */
+ current_gdbarch = new_gdbarch;
+ current_gdbarch_swap_init_hack ();
+ current_gdbarch_swap_out_hack ();
if (gdbarch_debug)
- gdbarch_dump (current_gdbarch, gdb_stdlog);
+ gdbarch_dump (new_gdbarch, gdb_stdlog);
+
+ return new_gdbarch;
+}
+
+struct gdbarch *
+gdbarch_find_by_info (struct gdbarch_info info)
+{
+ /* Save the previously selected architecture, setting the global to
+ NULL. This stops things like gdbarch->init() trying to use the
+ previous architecture's configuration. The previous architecture
+ may not even be of the same architecture family. The most recent
+ architecture of the same family is found at the head of the
+ rego->arches list. */
+ struct gdbarch *old_gdbarch = current_gdbarch_swap_out_hack ();
- return 1;
+ /* Find the specified architecture. */
+ struct gdbarch *new_gdbarch = find_arch_by_info (old_gdbarch, info);
+
+ /* Restore the existing architecture. */
+ gdb_assert (current_gdbarch == NULL);
+ current_gdbarch_swap_in_hack (old_gdbarch);
+
+ return new_gdbarch;
}
+/* Make the specified architecture current, swapping the existing one
+ out. */
+
+void
+deprecated_current_gdbarch_select_hack (struct gdbarch *new_gdbarch)
+{
+ gdb_assert (new_gdbarch != NULL);
+ gdb_assert (current_gdbarch != NULL);
+ gdb_assert (new_gdbarch->initialized_p);
+ current_gdbarch_swap_out_hack ();
+ current_gdbarch_swap_in_hack (new_gdbarch);
+ architecture_changed_event ();
+}
extern void _initialize_gdbarch (void);